Comment Closes On
|
|
Development Note
|
Supersedes DIN 17671-1, DIN 17671-2, DIN 17674-1, DIN 17674-2, DIN 17933-51 and DIN 59752. (07/2002) Supersedes DIN 17674-4 and DIN 17674-5. (06/2003) |
Document Type
|
Draft |
ISBN
|
|
Pages
|
|
Published
|
|
Publisher
|
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status
|
Superseded |
Supersedes
|
|
DKI I 008 : 2012
|
|
DIN 18516-1:2010-06
|
Cladding for external walls, ventilated at rear - Part 1: Requirements, principles of testing |
DIN 3523:2001-04
|
Fittings for drinking water installations - Extensions |
DIN HDBK 456/3 : 2ED 2015
|
KUPFER 3 - STANGEN, DRAEHTE, PROFILE, GUSSSTUECKE UND SCHMIEDESTUECKE |
BGR 146 : 2003
|
FLUESSIGGASANLAGEN ZU HAUSHALTSZWECKEN AUF WASSERFAHRZEUGEN IN DER BINNENSCHIFFAHRT |
DIN 50930-6:2013-10
|
Corrosion of metals - Corrosion of metallic materials under corrosion load by water inside of pipes, tanks and apparatus - Part 6: Evaluation process and requirements regarding the hygienic suitability in contact with drinking water |
DIN 30690-1:2016-04
|
CONSTRUCTION ELEMENTS IN THE GAS SUPPLY SYSTEM - PART 1: REQUIREMENTS FOR CONSTRUCTION ELEMENTS IN GAS SUPPLY SYSTEMS |
DIN HDBK 457 : 2ED 2004
|
KUPFER 2 - STANGEN, DRAEHTE, PROFILE, GUSSSTUECKE UND SCHMIEDESTUECKE |
DIN 7331:2011-03
|
Compression rivets |
ISO 6507-1:2005
|
Metallic materials Vickers hardness test Part 1: Test method |
EN 1655:1997
|
Copper and copper alloys - Declarations of conformity |
EN 14977:2006
|
Copper and copper alloys - Detection of tensile stress - 5 % ammonia test |
EN ISO 6506-1:2014
|
Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
ISO 6506-1:2014
|
Metallic materials Brinell hardness test Part 1: Test method |
ISO 6509-1:2014
|
Corrosion of metals and alloys Determination of dezincification resistance of copper alloys with zinc Part 1: Test method |
EN ISO 80000-1:2013
|
Quantities and units - Part 1: General (ISO 80000-1:2009 + Cor 1:2011) |
EN 1412:2016
|
Copper and copper alloys - European numbering system |
ISO 1190-1:1982
|
Copper and copper alloys Code of designation Part 1: Designation of materials |
EN ISO 6892-1:2016
|
Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
ISO 1811-2:1988
|
Copper and copper alloys Selection and preparation of samples for chemical analysis Part 2: Sampling of wrought products and castings |
ISO 6892-1:2016
|
Metallic materials Tensile testing Part 1: Method of test at room temperature |
EN 12449:2016
|
Copper and copper alloys - Seamless, round tubes for general purposes |
EN 1173:2008
|
Copper and copper alloys - Material condition designation |
EN ISO 6509-1:2014
|
Corrosion of metals and alloys - Determination of dezincification resistance of copper alloys with zinc - Part 1: Test method (ISO 6509-1:2014) |
EN ISO 9001:2015
|
Quality management systems - Requirements (ISO 9001:2015) |
EN 10204:2004
|
Metallic products - Types of inspection documents |
ISO 80000-1:2009
|
Quantities and units — Part 1: General |
ISO 9001:2015
|
Quality management systems — Requirements |
ISO 6957:1988
|
Copper alloys Ammonia test for stress corrosion resistance |
EN 12163:2016
|
Copper and copper alloys - Rod for general purposes |
Unfortunately, this product is not available for purchase in your region.
-
Access your standards online with a subscription
Features
- Simple online access to standards, technical information and regulations
- Critical updates of standards and customisable alerts and notifications
- Multi - user online standards collection: secure, flexibile and cost effective