Skip to content
Please enter a keyword to search

  • DIN EN 13035-1 E : 2008

    Current The latest, up-to-date edition.

    MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 1: STORAGE, HANDLING AND TRANSPORTATION EQUIPMENT INSIDE THE FACTORY

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  01-01-2008

    Publisher:  German Institute for Standardisation (Deutsches Institut für Normung)

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    Introduction
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 List of significant hazards
    5 Safety requirements and/or protective measures
      5.1 General
      5.2 Mechanical strength
      5.3 Angle of lean
      5.4 Retention of glass
      5.5 Cladding materials
      5.6 Tow bars
      5.7 Stability of storage equipment
      5.8 Vacuum-lifting device for use inside the factory
      5.9 Other hazards
    6 Verification of safety requirements and/or protective measures
    7 Information for use
      7.1 General
      7.2 Signals and warning devices
      7.3 Accompanying documents
      7.4 Marking
    Annex A (informative) Overview over equipment for glass storing,
                          handling and transporting
    Annex B (informative) Terminology
          B.1 Referring to glass
              B.1.1 Glass height 'H'
              B.1.2 Glass length 'L'
              B.1.3 Product
              B.1.4 Cullet
              B.1.5 Flat glass
              B.1.6 Substance
              B.1.7 Vent
          B.2 Referring to storage equipment
              B.2.1 Attitude of glass in any type of equipment
              B.2.2 Type of equipment
    Annex C (informative) Minimum clearances for interfacing equipment
          C.1 Vertical supporting bearers and the grab
          C.2 Horizontal base bearers and the grab
          C.3 Horizontal supporting bearers and the grab
          C.4 Interfacing structural (non supporting) equipment and
              handling device fingers
          C.5 Beam-strap sling and over-the-top grab
    Annex ZA (informative) Relationship between this European Standard
                           and the Essential Requirements of EU Directive
                           98/37/EC
    Annex ZB (informative) Relationship between this European Standard
                           and the Essential Requirements of EU Directive
                           2006/42/EC
    Bibliography
    National Annex NA (informative) Bibliography

    Abstract - (Show below) - (Hide below)

    Specifies the requirements for safety for the design and installation of equipment intended for the storage, handling and transportation of flat glass inside the factory as described in Clause 3.

    General Product Information - (Show below) - (Hide below)

    Development Note The 2020 draft version has released for the standard DIN EN 13035-1
    Document Type Standard
    Publisher German Institute for Standardisation (Deutsches Institut für Normung)
    Status Current

    Standards Referencing This Book - (Show below) - (Hide below)

    EN 294:1992/AC:1993 SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE UPPER LIMBS
    ISO 11202:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections
    EN 1037:1995+A1:2008 Safety of machinery - Prevention of unexpected start-up
    ISO 14122-3:2016 Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails
    ISO 14122-1:2016 Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means and general requirements of access
    EN 13155:2003+A2:2009 Cranes - Safety - Non-fixed load lifting attachments
    EN 13035-3:2003 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 3: Cutting machines
    EN 1088:1995+A2:2008 Safety of machinery - Interlocking devices associated with guards - Principles for design and selection
    EN 13035-9:2006+A1:2010 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 9: Washing installations
    EN 13035-6:2006+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 6: Machines for break-out
    EN 999:1998+A1:2008 Safety of machinery - The positioning of protective equipment in respect of approach speeds of parts of the human body
    DIN 4844-1:2012-06 GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - PART 1: OBSERVATION DISTANCES AND COLORIMETRIC AND PHOTOMETRIC REQUIREMENTS
    EN 811 : 1996 SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE LOWER LIMBS
    EN 349:1993+A1:2008 Safety of machinery - Minimum gaps to avoid crushing of parts of the human body
    IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
    EN ISO 13850:2015 Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015)
    ISO 14122-4:2016 Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders
    EN ISO 11201:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010)
    EN ISO 12100-1:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
    EN 1757-3:2002 Safety of industrial trucks - Pedestrian controlled manual and semi-manual trucks - Part 3: Platform trucks
    EN ISO 14122-3:2016 Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2016)
    EN 953:1997+A1:2009 Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
    EN 842:1996+A1:2008 Safety of machinery - Visual danger signals - General requirements, design and testing
    EN ISO 14122-4:2016 Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders (ISO 14122-4:2016)
    EN ISO 14122-2:2016 Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways (ISO 14122-2:2016)
    EN 13035-5:2006+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 5: Machines and installations for stacking and de-stacking
    ISO 12100-2:2003 Safety of machinery Basic concepts, general principles for design Part 2: Technical principles
    EN ISO 12100-2:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
    ISO 3864-1:2011 Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings
    EN 983:1996+A1:2008 Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics
    EN 954-1 : 1996 SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN
    ISO 12100-1:2003 Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology
    ISO 13850:2015 Safety of machinery Emergency stop function Principles for design
    EN 13035-4:2003+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 4: Tilting tables
    EN 13035-2:2008 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 2: Storage, handling and transportation equipment outside the factory
    ISO 14122-2:2016 Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways
    EN 13035-7:2006+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 7: Cutting machines for laminated glass
    EN ISO 14122-1:2016 Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means and general requirements of access (ISO 14122-1:2016)
    EN ISO 11202:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010)
    ISO 11201:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
    EN 13035-11:2006+A1:2010 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 11: Drilling machines
    EN 60204-1 : 2006 COR 2010 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective