|
EN 1127-1:2011
|
Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology |
|
ISO 9223:2012
|
Corrosion of metals and alloys — Corrosivity of atmospheres — Classification, determination and estimation |
|
IEC 60079-1:2014 RLV
|
Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" |
|
ISO 4308-1:2003
|
Cranes and lifting appliances Selection of wire ropes Part 1: General |
|
IEC 60079-10:2002
|
Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas |
|
CEN/TS 13001-3-1:2004/AC:2006
|
CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES |
|
IEC 61000-6-4:2006+AMD1:2010 CSV
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS |
|
EN 13557:2003+A2:2008
|
Cranes - Controls and control stations |
|
EN 418 : 1992
|
SAFETY OF MACHINERY - EMERGENCY STOP EQUIPMENT, FUNCTIONAL ASPECTS - PRINCIPLES FOR DESIGN |
|
EN 982:1996+A1:2008
|
Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics |
|
ISO 4871:1996
|
Acoustics — Declaration and verification of noise emission values of machinery and equipment |
|
ISO 3744:2010
|
Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
|
EN 12644-2:2000+A1:2008
|
Cranes - Information for use and testing - Part 2: Marking |
|
EN 60079-1:2014
|
Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" |
|
ISO/TR 11688-1:1995
|
Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning |
|
ISO 6336-2:2006
|
Calculation of load capacity of spur and helical gears Part 2: Calculation of surface durability (pitting) |
|
ISO 9226:2012
|
Corrosion of metals and alloys — Corrosivity of atmospheres — Determination of corrosion rate of standard specimens for the evaluation of corrosivity |
|
EN 60034-1:2010/corrigendum Oct. 2010
|
ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE |
|
IEC 61000-6-2:2016
|
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments |
|
ISO 5598:2008
|
Fluid power systems and components Vocabulary |
|
EN 60079-0:2012/A11:2013
|
EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED) |
|
EN 50020:2002
|
Electrical apparatus for potentially explosive atmospheres - Intrinsic safety 'i' |
|
ISO 9224:2012
|
Corrosion of metals and alloys — Corrosivity of atmospheres — Guiding values for the corrosivity categories |
|
ISO 13732-1:2006
|
Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
|
EN 13463-1:2009
|
Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements |
|
EN 13135-2:2004+A1:2010
|
Cranes - Equipment - Part 2: Non-electrotechnical equipment |
|
IEC 60079-18:2014 RLV
|
Explosive atmospheres - Part 18: Equipment protection by encapsulation “m” |
|
PREN 15011 : DRAFT 2017
|
CRANES - BRIDGE AND GANTRY CRANES |
|
EN 818-7:2002+A1:2008
|
Short link chain for lifting purposes - Safety - Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT) |
|
IEC 60204-32:2008
|
Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines |
|
ISO 606:2015
|
Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets |
|
EN 1050 : 1996
|
SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT |
|
UNI 9465 : 1989
|
LIFTING HOOKS FOR LIFTING APPLIANCES - MECHANICAL PROPERTIES, LOAD CAPACITIES, STRESSES AND MATERIALS |
|
EN 50017:1998
|
Electrical apparatus for potentially explosive atmospheres - Powder filling "q" |
|
ISO 9225:2012
|
Corrosion of metals and alloys — Corrosivity of atmospheres — Measurement of environmental parameters affecting corrosivity of atmospheres |
|
EN 13411-3:2004+A1:2008
|
Terminations for steel wire ropes - Safety - Part 3: Ferrules and ferrule-securing |
|
EN ISO 11688-2 : 2000
|
ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE MACHINERY AND EQUIPMENT - PART 2: INTRODUCTION TO THE PHYSICS OF LOW-NOISE DESIGN |
|
IEC 60072-1:1991
|
Dimensions and output series for rotating electrical machines - Part 1: Frame numbers 56 to 400 and flange numbers 55 to 1080 |
|
EN ISO 13732-1:2008
|
Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006) |
|
ISO 6336-5:2016
|
Calculation of load capacity of spur and helical gears Part 5: Strength and quality of materials |
|
EN 13411-7:2006+A1:2008
|
Terminations for steel wire ropes - Safety - Part 7: Symmetric wedge socket |
|
EN 60204-32:2008
|
Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines |
|
EN ISO 11201:2010
|
Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) |
|
EN 13001-2:2014
|
Crane safety - General design - Part 2: Load actions |
|
EN ISO 8044:2015
|
Corrosion of metals and alloys - Basic terms and definitions (ISO 8044:2015) |
|
EN ISO 12100-1:2003/A1:2009
|
SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY |
|
ISO 4309:2010
|
Cranes Wire ropes Care and maintenance, inspection and discard |
|
EN 61000-6-2:2005/corrigendum:2005
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS (IEC 61000-6-2:2005) |
|
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV
|
Degrees of protection provided by enclosures (IP Code) |
|
EN 13001-1:2015
|
Cranes - General design - Part 1: General principles and requirements |
|
EN ISO 3744:2010
|
Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
|
EN 61000-6-4:2007/A1:2011
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS |
|
ISO 8044:2015
|
Corrosion of metals and alloys Basic terms and definitions |
|
IEC 60079-0:2011
|
Explosive atmospheres - Part 0: Equipment - General requirements |
|
EN 13411-4:2011
|
Terminations for steel wire ropes - Safety - Part 4: Metal and resin socketing |
|
EN 13411-6:2004+A1:2008
|
Terminations for steel wire ropes - Safety - Part 6: Asymmetric wedge socket |
|
EN 60079-10:2003
|
Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas |
|
ISO 12100-2:2003
|
Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
|
IEC 60034-1:2017
|
Rotating electrical machines - Part 1: Rating and performance |
|
EN ISO 12100-2:2003/A1:2009
|
SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES |
|
ISO 6336-1:2006
|
Calculation of load capacity of spur and helical gears Part 1: Basic principles, introduction and general influence factors |
|
IEC 61000-6-4:2006+AMD1:2010 CSV
|
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments |
|
ISO 8407:2009
|
Corrosion of metals and alloys Removal of corrosion products from corrosion test specimens |
|
DIN 15400:1990-06
|
LIFTING HOOKS - MATERIALS, MECHANICAL PROPERTIES, LIFTING CAPACITY AND STRESSES |
|
EN 983:1996+A1:2008
|
Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics |
|
ISO 12100-1:2003
|
Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
|
EN ISO 13849-1:2015
|
Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
|
EN 818-1:1996+A1:2008
|
Short link chain for lifting purposes - Safety - Part 1: General conditions of acceptance |
|
EN ISO 4871:2009
|
Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
|
EN 50015:1998
|
Electrical apparatus for potentially explosive atmospheres - Oil immersion "o" |
|
EN 13463-5:2011
|
Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: Protection by constructional safety 'c' |
|
EN 60529:1991/AC:2016-12
|
DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
|
ISO 4301-1:2016
|
Cranes — Classification — Part 1: General |
|
ISO 8565:2011
|
Metals and alloys Atmospheric corrosion testing General requirements |
|
EN ISO 11688-1:2009
|
Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995) |
|
ISO 13849-1:2015
|
Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
|
ISO/TR 11688-2:1998
|
Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design |
|
IEC 61000-6-2 : 3.0:2016
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY STANDARD FOR INDUSTRIAL ENVIRONMENTS |
|
ISO 12482-1:1995
|
Cranes Condition monitoring Part 1: General |
|
EN ISO 8565:2011
|
Metals and alloys - Atmospheric corrosion testing - General requirements (ISO 8565:2011) |
|
ISO 11201:2010
|
Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections |
|
EN 60034-5:2001/A1:2007
|
ROTATING ELECTRICAL MACHINES - PART 5: DEGREES OF PROTECTION PROVIDED BY THE INTEGRAL DESIGN OF ROTATING ELECTRICAL MACHINES (IP CODE) - CLASSIFICATION |
|
EN 60079-2:2014/AC:2015
|
EXPLOSIVE ATMOSPHERES - PART 2: EQUIPMENT PROTECTION BY PRESSURIZED ENCLOSURE 'P' (IEC 60079-2:2014) |