• DIN EN 14846 E : 2008

    Current The latest, up-to-date edition.

    BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  01-01-2008

    Publisher:  German Institute for Standardisation (Deutsches Institut für Normung)

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    National foreword
    Foreword
    1 Scope
    2 Normative references
    3 Terms, definitions and symbols
    4 Classification
      4.1 General
      4.2 Classification
      4.3 Category of use (first digit)
      4.4 Durability and load on latchbolt (second digit)
      4.5 Door mass and closing force (third digit)
      4.6 Suitability for use on fire/smoke doors (fourth
           digit)
      4.7 Safety (fifth digit)
      4.8 Corrosion, temperature and humidity (sixth digit)
      4.9 Security (seventh digit)
      4.10 Security - electrical function (eighth digit)
      4.11 Security - electrical manipulation (ninth digit)
    5 Requirements
      5.1 General
      5.2 Category of use
      5.3 Durability
      5.4 Door mass and closing force
      5.5 Suitability for use on fire/smoke doors
      5.6 Safety
      5.7 Corrosion, temperature and humidity requirements
      5.8 Security requirements
      5.9 Security - Electrical function - Status indication
      5.10 Security - Electrical manipulation
      5.11 Requirements for product information
    6 Test methods
      6.1 Test procedure
      6.2 Category of use tests
      6.3 Durability tests
      6.4 Door mass and closing force
      6.5 Fire/smoke resistance tests
      6.6 Safety
      6.7 Corrosion, temperature and humidity tests
      6.8 Security tests
      6.9 Security - Electrical function tests - Status
           indication
      6.10 Security - Electrical manipulation tests
    7 Marking
    8 Evaluation of conformity
      8.1 Initial type test
      8.2 Sampling, testing and conformity criteria
      8.3 Factory production control
      8.4 Periodic testing
      8.5 Annual testing
    Annex A (normative) - Fire/smoke test requirements
    Annex B (normative) - Test sampling and sequencing
    Annex C (normative) - Installation and fixing
            instructions
    Annex ZA (normative) - Clauses of this European
             Standard addressing the provisions of
             the EU Construction Products Directive
             (89/106/EEC)
    Bibliography

    Abstract - (Show below) - (Hide below)

    Describes requirements and test methods for strength, security, durability and function of electrical and electronic components for all types of electromechanically operated locks and striking plates used on doors, window doors and entrance doors in buildings.

    General Product Information - (Show below) - (Hide below)

    Document Type Standard
    Publisher German Institute for Standardisation (Deutsches Institut für Normung)
    Status Current

    Standards Referencing This Book - (Show below) - (Hide below)

    EN 1906:2012 BUILDING HARDWARE - LEVER HANDLES AND KNOB FURNITURE - REQUIREMENTS AND TEST METHODS
    EN 1155:1997/A1:2002/AC:2006 BUILDING HARDWARE - ELECTRICALLY POWERED HOLD-OPEN DEVICES FOR SWING DOORS - REQUIREMENTS AND TEST METHODS
    EN 1158:1997/A1:2002/AC:2006 BUILDING HARDWARE - DOOR COORDINATOR DEVICES - REQUIREMENTS AND TEST METHODS
    IEC 61000-4-4 : 3.0EN+(REDLINE+VERSION) ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST
    EN 61000-4-11:2004/A1:2017 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-11: TESTING AND MEASUREMENT TECHNIQUES - VOLTAGE DIPS, SHORT INTERRUPTIONS AND VOLTAGE VARIATIONS IMMUNITY TESTS (IEC 61000-4-11:2004/A1:2017)
    EN 1670:2007/AC:2008 BUILDING HARDWARE - CORROSION RESISTANCE - REQUIREMENTS AND TEST METHODS
    EN 1634-3:2004/AC:2006 FIRE RESISTANCE AND SMOKE CONTROL TESTS FOR DOOR AND SHUTTER ASSEMBLIES, OPENABLE WINDOWS AND ELEMENTS OF BUILDING HARDWARE - PART 3: SMOKE CONTROL TEST FOR DOOR AND SHUTTER ASSEMBLIES
    EN 60068-2-1:2007 ENVIRONMENTAL TESTING - PART 2-1: TESTS - TEST A: COLD
    EN 60068-2-2:2007 ENVIRONMENTAL TESTING - PART 2-2: TESTS - TEST B: DRY HEAT
    IEC 61000-4-11:2004+AMD1:2017 CSV Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
    EN 1303:2015 BUILDING HARDWARE - CYLINDERS FOR LOCKS - REQUIREMENTS AND TEST METHODS
    EN 61000-4-2:2009 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-2: TESTING AND MEASUREMENT TECHNIQUES - ELECTROSTATIC DISCHARGE IMMUNITY TEST
    EN 12209:2016 BUILDING HARDWARE - MECHANICALLY OPERATED LOCKS AND LOCKING PLATES - REQUIREMENTS AND TEST METHODS
    EN 61000-4-3 : 2006 AMD 2 2010 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-3: TESTING AND MEASUREMENT TECHNIQUES - RADIATED, RADIO-FREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST
    EN 12320:2012 BUILDING HARDWARE - PADLOCKS AND PADLOCK FITTINGS - REQUIREMENTS AND TEST METHODS
    PREN 13637 : DRAFT 2014 BUILDING HARDWARE - ELECTRICALLY CONTROLLED EXIT SYSTEMS FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS
    EN ISO 9001:2015 QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS (ISO 9001:2015)
    IEC 60068-2-2:2007 Environmental testing - Part 2-2: Tests - Test B: Dry heat
    IEC 61000-4-2:2008 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
    IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
    ISO 9001:2015 Quality management systems - Requirements
    EN 61000-4-4:2012 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST (IEC 61000-4-4:2012)
    EN 60335-1:2012/A13:2017 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED)
    IEC 60068-2-1:2007 Environmental testing - Part 2-1: Tests - Test A: Cold
    EN 60068-2-30:2005 ENVIRONMENTAL TESTING - PART 2-30: TESTS - TEST DB: DAMP HEAT, CYCLIC (12 H + 12 H CYCLE)
    IEC 61000-4-29:2000 Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests
    EN 61000-4-29 : 2000 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-29: TESTING AND MEASUREMENT TECHNIQUES - VOLTAGE DIPS, SHORT INTERRUPTIONS AND VOLTAGE VARIATIONS ON D.C. INPUT POWER PORT IMMUNITY TESTS
    EN 179 : 2008 BUILDING HARDWARE - EMERGENCY EXIT DEVICES OPERATED BY A LEVER HANDLE OR PUSH PAD, FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS
    IEC 60068-2-30:2005 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective