EN 10240:1997
|
Internal and/or external protective coatings for steel tubes - Specification for hot dip galvanized coatings applied in automatic plants |
EN ISO 15875-2:2003/A1:2007
|
PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CROSSLINKED POLYETHYLENE (PE-X) - PART 2: PIPES |
EN 1254-4:1998/AC:1999
|
COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 4: FITTINGS COMBINING OTHER END CONNECTIONS WITH CAPILLARY OR COMPRESSION ENDS |
EN 12502-1 : 2004
|
PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - GUIDANCE ON THE ASSESSMENT OF CORROSION LIKELIHOOD IN WATER DISTRIBUTION AND STORAGE SYSTEMS - PART 1: GENERAL |
EN ISO 15877-2:2009/A1:2010
|
PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 2: PIPES |
EN ISO 15875-3:2003
|
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings (ISO 15875-3:2003) |
EN 1254-5:1998
|
Copper and copper alloys - Plumbing fittings - Part 5: Fittings with short ends for capillary brazing to copper tubes |
ISO 15877-3:2009
|
Plastics piping systems for hot and cold water installations Chlorinated poly(vinyl chloride) (PVC-C) Part 3: Fittings |
EN 1057:2006+A1:2010
|
Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications |
EN ISO 15877-3:2009/A1:2010
|
PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 3: FITTINGS |
EN 12502-4 : 2004
|
PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - GUIDANCE ON THE ASSESSMENT OF CORROSION LIKELIHOOD IN WATER DISTRIBUTION AND STORAGE SYSTEMS - PART 4: INFLUENCING FACTORS FOR STAINLESS STEELS |
EN 1254-1:1998
|
Copper and copper alloys - Plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes |
EN 1254-2:1998
|
Copper and copper alloys - Plumbing fittings - Part 2: Fittings with compression ends for use with copper tubes |
EN ISO 15876-2:2017
|
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 2: Pipes (ISO 15876-2:2017) |
EN 12502-3 : 2004
|
PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - GUIDANCE ON THE ASSESSMENT OF CORROSION LIKELIHOOD IN WATER DISTRIBUTION AND STORAGE SYSTEMS - PART 3: INFLUENCING FACTORS FOR HOT DIP GALVANISED FERROUS MATERIALS |
EN 10088-3:2014
|
Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
ISO 15875-5:2003
|
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 5: Fitness for purpose of the system |
EN 10312:2002/A1:2005
|
WELDED STAINLESS STEEL TUBES FOR THE CONVEYANCE OF WATER AND OTHER AQUEOUS LIQUIDS - TECHNICAL DELIVERY CONDITIONS |
EN ISO 15877-1:2009/A1:2010
|
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: General - Amendment 1 (ISO 15877-1:2009/AMD 1:2010) |
EN ISO 15877-5:2009/A1:2010
|
PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 5: FITNESS FOR PURPOSE OF THE SYSTEM |
ISO 15877-2:2009
|
Plastics piping systems for hot and cold water installations Chlorinated poly(vinyl chloride) (PVC-C) Part 2: Pipes |
ISO 15875-2:2003
|
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 2: Pipes |
EN ISO 15876-5:2017
|
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 5: Fitness for purpose of the system (ISO 15876-5:2017) |
EN 10088-2:2014
|
STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
ISO 9454-1:2016
|
Soft soldering fluxes Classification and requirements Part 1: Classification, labelling and packaging |
EN 12502-5 : 2004
|
PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - GUIDANCE ON THE ASSESSMENT OF CORROSION LIKELIHOOD IN WATER DISTRIBUTION AND STORAGE SYSTEMS - PART 5: INFLUENCING FACTORS FOR CAST IRON, UNALLOYED AND LOW ALLOYED STEELS |
EN 12449:2016
|
Copper and copper alloys - Seamless, round tubes for general purposes |
ISO 15877-1:2009
|
Plastics piping systems for hot and cold water installations Chlorinated poly(vinyl chloride) (PVC-C) Part 1: General |
ISO 15876-1:2017
|
Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 1: General |
ISO 15876-3:2017
|
Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 3: Fittings |
EN 12502-2 : 2004
|
PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - GUIDANCE ON THE ASSESSMENT OF CORROSION LIKELIHOOD IN WATER DISTRIBUTION AND STORAGE SYSTEMS - PART 2: INFLUENCING FACTORS FOR COPPER AND COPPER ALLOYS |
ISO 15877-5:2009
|
Plastics piping systems for hot and cold water installations Chlorinated poly(vinyl chloride) (PVC-C) Part 5: Fitness for purpose of the system |
EN ISO 15875-1:2003/A1:2007
|
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 1: General - Amendment 1 (ISO 15875-1:2003/Amd 1:2007) |
EN ISO 8044:2015
|
Corrosion of metals and alloys - Basic terms and definitions (ISO 8044:2015) |
EN ISO 15876-1:2017
|
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 1: General (ISO 15876-1:2017) |
EN ISO 15875-5:2003
|
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5: Fitness for purpose of the system (ISO 15875-5:2003) |
EN ISO 15876-3:2017
|
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings (ISO 15876-3:2017) |
EN 29454-1:1993
|
Soft soldering fluxes - Classification and requirements - Part 1: Classification, labelling and packaging (ISO 9454-1:1990) |
ISO 8044:2015
|
Corrosion of metals and alloys Basic terms and definitions |
ISO 6509:1981
|
Corrosion of metals and alloys Determination of dezincification resistance of brass |
ISO 15876-2:2017
|
Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 2: Pipes |
ISO 15875-1:2003
|
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 1: General |
EN 10224:2002/A1:2005
|
NON-ALLOY STEEL TUBES AND FITTINGS FOR THE CONVEYANCE OF WATER AND OTHER AQUEOUS LIQUIDS - TECHNICAL DELIVERY CONDITIONS |
ISO 15875-3:2003
|
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 3: Fittings |
EN ISO 6509 : 1995
|
CORROSION OF METALS AND ALLOYS - DETERMINATION OF DEZINCIFICATION RESISTANCE OF BRASS |
ISO 15876-5:2017
|
Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 5: Fitness for purpose of the system |
EN 10255:2004+A1:2007
|
Non-Alloy steel tubes suitable for welding and threading - Technical delivery conditions |
EN 10088-1:2014
|
Stainless steels - Part 1: List of stainless steels |