ISO 2811-1:2016
|
Paints and varnishes — Determination of density — Part 1: Pycnometer method |
EN 13687-3:2002
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 3: Thermal cycling without de-icing salt impact |
DIN ISO 8130-1 E : 2005
|
COATING POWDERS - PART 1: DETERMINATION OF PARTICLE SIZE DISTRIBUTION BY SIEVING |
DIN ISO 8130-2 E : 2005
|
COATING POWDERS - PART 2: DETERMINATION OF DENSITY BY GAS COMPARISON PYKNOMETER (REFEREE METHOD) |
EN 228:2012+A1:2017
|
Automotive fuels - Unleaded petrol - Requirements and test methods |
EN ISO 2431:2011
|
Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:2011) |
EN 14879-1:2005
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate |
ISO 3219:1993
|
Plastics — Polymers/resins in the liquid state or as emulsions or dispersions — Determination of viscosity using a rotational viscometer with defined shear rate |
ISO 2811-3:2011
|
Paints and varnishes — Determination of density — Part 3: Oscillation method |
ISO 2808:2007
|
Paints and varnishes Determination of film thickness |
EN 59:2016
|
Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester |
EN ISO 4625-1:2006
|
Binders for paints and varnishes - Determination of softening point - Part 1: Ring-and-ball method (ISO 4625-1:2004) |
EN 1767:1999
|
Products and systems for the protection and repair of concrete structures - Test methods - Infrared analysis |
EN ISO 2811-2:2011
|
Paints and varnishes - Determination of density - Part 2: Immersed body (plummet) method (ISO 2811-2:2011) |
DIN ISO 8130-5 E : 2005
|
COATING POWDERS - PART 5: DETERMINATION OF FLOW PROPERTIES OF A POWDER/AIR MIXTURE |
EN 977:1997
|
Underground tanks of glass-reinforced plastics (GRP) - Method for one side exposure to fluids |
EN ISO 2409:2013
|
Paints and varnishes - Cross-cut test (ISO 2409:2013) |
PREN 14879-6 : DRAFT 2009
|
ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 6: COMBINED LININGS WITH TILE AND BRICK LAYERS |
DIN ISO 8130-8 E : 2005
|
COATING POWDERS - PART 8: ASSESSMENT OF THE STORAGE STABILITY OF THERMOSETTING POWDERS |
ISO 3882:2003
|
Metallic and other inorganic coatings — Review of methods of measurement of thickness |
EN 13238:2010
|
Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates |
EN ISO 3251:2008
|
Paints, varnishes and plastics - Determination of non-volatile-matter content (ISO 3251:2008) |
ISO 4625-1:2004
|
Binders for paints and varnishes Determination of softening point Part 1: Ring-and-ball method |
EN ISO 2811-1:2016
|
Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO 2811-1:2016) |
EN ISO 2811-3:2011
|
Paints and varnishes - Determination of density - Part 3: Oscillation method (ISO 2811-3:2011) |
DIN 51130:2014-02
|
Testing of floor coverings - Determination of the anti-slip property - Workrooms and fields of activities with slip danger - Walking method - Ramp test |
EN ISO 3882:2003
|
Metallic and other inorganic coatings - Review of methods of measurement of thickness (ISO 3882:2003) |
IEC 60167:1964
|
Methods of test for the determination of the insulation resistance of solid insulating materials |
DIN ISO 8130-3 E : 2005
|
COATING POWDERS - PART 3: DETERMINATION OF DENSITY BY LIQUID DISPLACEMENT PYKNOMETER |
ISO 4624:2016
|
Paints and varnishes — Pull-off test for adhesion |
IEC 60093:1980
|
Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials |
DIN ISO 8130-7 E : 2005
|
COATING POWDERS - PART 7: DETERMINATION OF LOSS OF MASS ON STOVING |
EN 12620:2002+A1:2008
|
Aggregates for concrete |
EN 13318:2000
|
Screed material and floor screeds - Definitions |
ISO 2811-2:2011
|
Paints and varnishes Determination of density Part 2: Immersed body (plummet) method |
ISO 175:2010
|
Plastics Methods of test for the determination of the effects of immersion in liquid chemicals |
EN ISO 3219:1994
|
Plastics - Polymers/resins in the liquid state or as emulsions or dispersions - Determination of viscosity using a rotational viscometer with defined shear rate (ISO 3219:1993) |
ISO 291:2008
|
Plastics Standard atmospheres for conditioning and testing |
EN ISO 4624:2016
|
Paints and varnishes - Pull-off test for adhesion (ISO 4624:2016) |
ISO 2815:2003
|
Paints and varnishes Buchholz indentation test |
ISO 6272-1:2011
|
Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 1: Falling-weight test, large-area indenter |
ISO 2559:2011
|
Textile glass Mats (made from chopped or continuous strands) Designation and basis for specifications |
EN ISO 2815:2003
|
Paints and varnishes - Buchholz indentation test (ISO 2815:2003) |
EN ISO 291:2008
|
Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008) |
ISO 3251:2008
|
Paints, varnishes and plastics Determination of non-volatile-matter content |
EN 12350-1:2009
|
Testing fresh concrete - Part 1: Sampling |
ISO 554:1976
|
Standard atmospheres for conditioning and/or testing — Specifications |
EN ISO 868:2003
|
Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003) |
ISO 2409:2013
|
Paints and varnishes Cross-cut test |
EN 1081:1998
|
Resilient floor coverings - Determination of the electrical resistance |
EN 1766:2017
|
Products and systems for the protection and repair of concrete structures - Test methods - Reference concretes for testing |
DIN ISO 8130-4 E : 2005
|
COATING POWDERS - PART 4: CALCULATION OF LOWER EXPLOSION LIMIT |
DIN ISO 8130-6 E : 2005
|
COATING POWDERS - PART 6: DETERMINATION OF GEL TIME OF THERMOSETTING COATING POWDERS AT A GIVEN TEMPERATURE |
EN ISO 6272-1:2011
|
Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2011) |
EN ISO 2808:2007
|
Paints and varnishes - Determination of film thickness (ISO 2808:2007) |
EN ISO 175:2010
|
Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:2010) |
EN 13813:2002
|
Screed material and floor screeds - Screed material - Properties and requirements |
ISO 868:2003
|
Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) |
ISO 2431:2011
|
Paints and varnishes Determination of flow time by use of flow cups |