• DIN EN 54-25 E : 2009

    Current The latest, up-to-date edition.

    FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 25: COMPONENTS USING RADIO LINKS

    Available format(s):  Hardcopy, PDF

    Language(s): 

    Published date:  01-01-2009

    Publisher:  German Institute for Standardisation (Deutsches Institut für Normung)

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    Introduction
    1 Scope
    2 Normative references
    3 Terms, definitions and abbreviations
      3.1 Terms and definitions
      3.2 Abbreviations
    4 System requirements
      4.1 General
      4.2 Radio frequency links
          4.2.1 Immunity to site attenuation
          4.2.2 Alarm signal integrity
          4.2.3 Identification of the RF linked component
          4.2.4 Receiver performance
          4.2.5 Immunity to interference
          4.2.6 Loss of communication
          4.2.7 Antenna
    5 Components requirements
      5.1 Compliance
      5.2 General
      5.3 Power supply equipment
      5.4 Environmental related requirements
          5.4.1 General
          5.4.2 General test procedure
          5.4.3 Provision for testing
    6 Documentation
    7 Marking
    8 Tests
      8.1 General requirements
          8.1.1 General
          8.1.2 Standard atmospheric conditions for testing
          8.1.3 Operating conditions for tests
          8.1.4 Mounting and orientation
          8.1.5 Tolerances
      8.2 System tests
          8.2.1 Test schedule for system tests
          8.2.2 Test for immunity to site attenuation
          8.2.3 Test for alarm signal integrity
          8.2.4 Test for identification of RF linked components
          8.2.5 Test for the receiver performance
          8.2.6 Test for mutual disturbance between systems of the
                 same manufacturer
          8.2.7 Test of compatibility with other band users
          8.2.8 Test for the detection of a loss of communication
                 on a link
          8.2.9 Test of the antenna
      8.3 Components tests
          8.3.1 General
          8.3.2 Test schedule for components tests
          8.3.3 Verification of the service life of the autonomous
                 power source(s)
          8.3.4 Test for the low power condition fault signal
          8.3.5 Test for the polarity reversal
          8.3.6 Repeatability test
          8.3.7 Reproducibility test
          8.3.8 Variation of supply parameters
          8.3.9 Dry heat (operational)
          8.3.10 Dry heat (endurance)
          8.3.11 Cold (operational)
          8.3.12 Damp heat, cyclic (operational)
          8.3.13 Damp heat, steady state (operational)
          8.3.14 Damp heat, steady state (endurance)
          8.3.15 SO[2]-corrosion (endurance)
          8.3.16 Shock (operational)
          8.3.17 Impact (operational)
          8.3.18 Vibration, sinusoidal (operational)
          8.3.19 Vibration, sinusoidal (endurance)
          8.3.20 Electromagnetic Compatibility (EMC), Immunity tests
                 (operational)
    Annex A (normative) Test configuration by using radio frequency
                        shielded test equipment
    Annex B (normative) Immunity to site attenuation (path loss)
    Annex C (informative) Data and calculation of the service life
             of the autonomous power source(s)
    Annex ZA (informative) Clauses of this European Standard
             addressing the provisions of the EU Construction
             Products Directive (89/106/EEC)
    Bibliography
    National Annex NA (informative) Bibliography

    Abstract - (Show below) - (Hide below)

    Defines requirements, test methods and performance criteria for components used in fire alarms systems, installed in and around buildings, which use radio frequency links (RF links) to communicate.

    General Product Information - (Show below) - (Hide below)

    Document Type Standard
    Publisher German Institute for Standardisation (Deutsches Institut für Normung)
    Status Current

    Standards Referencing This Book - (Show below) - (Hide below)

    EN 60068-2-42 : 2003 ENVIRONMENTAL TESTING - PART 2-42: TESTS - TEST KC: SULPHUR DIOXIDE TEST FOR CONTACTS AND CONNECTIONS
    VDE 0833-2 :2017-10 ALARM SYSTEMS FOR FIRE, INTRUSION AND HOLD UP - PART 2: REQUIREMENTS FOR FIRE ALARM SYSTEMS
    IEC 60068-2-27:2008 Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock
    EN 60068-2-1 : 2007 ENVIRONMENTAL TESTING - PART 2-1: TESTS - TEST A: COLD
    EN 54-5 : 2017 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 5: HEAT DETECTORS - POINT HEAT DETECTORS
    EN 60068-2-2:2007 ENVIRONMENTAL TESTING - PART 2-2: TESTS - TEST B: DRY HEAT
    EN 54-18:2005/AC:2007 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 18: INPUT/OUTPUT DEVICES
    89/106/EEC : 1988 COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS
    EN 54-2:1997/A1:2006 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 2: CONTROL AND INDICATING EQUIPMENT
    DIN VDE 0833-2:2017-10 ALARM SYSTEMS FOR FIRE, INTRUSION AND HOLD UP - PART 2: REQUIREMENTS FOR FIRE ALARM SYSTEMS
    EN 300 113-1 : 1.7.1 ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); LAND MOBILE SERVICE; RADIO EQUIPMENT INTENDED FOR THE TRANSMISSION OF DATA (AND/OR SPEECH) USING CONSTANT OR NON-CONSTANT ENVELOPE MODULATION AND HAVING AN ANTENNA CONNECTOR; PART 1: TECHNICAL CHARACTERISTICS AND METHODS OF MEASUREMENT
    EN 60068-2-27 : 2009 ENVIRONMENTAL TESTING - PART 2-27: TESTS - TEST EA AND GUIDANCE: SHOCK
    EN ISO 9001 : 2015 QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS (ISO 9001:2015)
    IEC 60068-2-2:2007 Environmental testing - Part 2-2: Tests - Test B: Dry heat
    ISO 9001:2015 Quality management systems Requirements
    IEC 60068-2-42:2003 ENVIRONMENTAL TESTING - PART 2-42: TESTS - TEST KC: SULPHUR DIOXIDE TEST FOR CONTACTS AND CONNECTIONS
    EN 60068-2-78 : 2013 ENVIRONMENTAL TESTING - PART 2-78: TESTS - TEST CAB: DAMP HEAT, STEADY STATE (IEC 60068-2-78:2012)
    EN 60068-2-6 : 2008 ENVIRONMENTAL TESTING - PART 2-6: TESTS - TEST FC: VIBRATION (SINUSOIDAL)
    IEC 60068-2-1:2007 Environmental testing - Part 2-1: Tests - Test A: Cold
    EN 50130-4:2011/A1:2014 ALARM SYSTEMS - PART 4: ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD: IMMUNITY REQUIREMENTS FOR COMPONENTS OF FIRE, INTRUDER, HOLD UP, CCTV, ACCESS CONTROL AND SOCIAL ALARM SYSTEMS
    EN 60068-2-30 : 2005 ENVIRONMENTAL TESTING - PART 2-30: TESTS - TEST DB: DAMP HEAT, CYCLIC (12 H + 12 H CYCLE)
    EN 54-13 : 2017 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 13: COMPATIBILITY AND CONNECTABILITY ASSESSMENT OF SYSTEM COMPONENTS
    EN 54-4:1997/A2:2006 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 4: POWER SUPPLY EQUIPMENT
    EN 54-11:2001/A1:2005 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 11: MANUAL CALL POINTS
    EN 300 220-1 : 2.4.1 SHORT RANGE DEVICES (SRD) OPERATING IN THE FREQUENCY RANGE 25 MHZ TO 1000 MHZ; PART 1: TECHNICAL CHARACTERISTICS AND METHODS OF MEASUREMENT
    IEC 60068-2-30:2005 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective