DIN EN 16125:2016-03
|
LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG LIQUID PHASE AND VAPOUR PRESSURE PHASE |
12/30255878 DC : 0
|
BS ISO 17885 - PLASTICS PIPING SYSTEMS - MECHANICAL FITTINGS FOR PRESSURE PIPING SYSTEMS - SPECIFICATIONS |
12/30257298 DC : 0
|
BS EN 676 - FORCED DRAUGHT BURNERS FOR GASEOUS FUELS |
04/30123995 DC : DRAFT OCT 2004
|
EN 50216-10 - POWER TRANSFORMER AND REACTOR FITTINGS - PART 10: OIL-TO-AIR HEAT EXCHANGERS |
BS EN 50216-10:2009
|
Power transformer and reactor fittings Oil-to-air heat exchangers |
I.S. CEN ISO TR 20172:2006
|
WELDING - GROUPING SYSTEMS FOR MATERIALS - EUROPEAN MATERIALS |
BS EN 14917 : 2009
|
METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS |
EN 14917:2009+A1:2012
|
Metal bellows expansion joints for pressure applications |
I.S. EN 13480-2:2017
|
METALLIC INDUSTRIAL PIPING - PART 2: MATERIALS |
I.S. EN 13445-4:2014
|
UNFIRED PRESSURE VESSELS - PART 4: FABRICATION |
EN 676:2003+A2:2008/AC:2008
|
AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS |
I.S. EN 253:2009
|
DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - PIPE ASSEMBLY OF STEEL SERVICE PIPE, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
I.S. EN 448:2015
|
DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
BS EN 13480-2:2017
|
Metallic industrial piping Materials |
DIN EN 12007-3:2015-07
|
GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 3: SPECIFIC FUNTIONAL REQUIREMENTS FOR STEEL |
DIN EN 14879-1 E : 2005
|
ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 1: TERMINOLOGY, DESIGN AND PREPARATION OF SUBSTRATE |
DIN EN 14879-1:2005-12
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate |
BS EN 14420-5:2013
|
Hose fittings with clamp units Threaded connections |
BS EN 14015:2004
|
Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above |
DIN EN 12952-14:2004-09
|
Water-tube boilers and auxiliary installations - Part 14: Requirements for fluegas DENOX systems using liquified pressurized ammonia and ammonia water solution |
EN 12952-14:2004
|
Water-tube boilers and auxiliary installations - Part 14: Requirements for flue gas DENOX-systems using liquified pressurized ammonia and ammonia water solution |
EN 10079:2007
|
Definition of steel products |
EN 12953-2:2012
|
Shell boilers - Part 2: Materials for pressure parts of boilers and accessories |
14/30294476 DC : 0
|
BS EN 448 - DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
DIN EN 14917:2012-06
|
Metal bellows expansion joints for pressure applications (includes Amendment A1:2012) |
DIN EN 10253-2:2008-09
|
Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements |
10/30216705 DC : 0
|
BS EN 12953-2 - SHELL BOILERS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
DIN EN 15001-1:2011-02
|
Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
10/30234613 DC : DRAFT NOV 2010
|
BS EN 14420-4 - HOSE FITTINGS WITH CLAMP UNITS - PART 4: FLANGE CONNECTIONS |
I.S. EN 13445-2:2014
|
UNFIRED PRESSURE VESSELS - PART 2: MATERIALS |
I.S. EN 16125:2015
|
LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG IN LIQUID PHASE AND VAPOUR PRESSURE PHASE |
BS EN 13445-2 : 2014
|
UNFIRED PRESSURE VESSELS - PART 2: MATERIALS |
EN 10253-2:2007
|
Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements |
I.S. EN 50216-10:2009
|
POWER TRANSFORMER AND REACTOR FITTINGS - PART 10: OIL-TO-AIR HEAT EXCHANGERS |
EN 13445-4 : 2014 COR 2017
|
UNFIRED PRESSURE VESSELS - PART 4: FABRICATION |
I.S. EN 10253-2:2007
|
BUTT-WELDING PIPE FITTINGS - PART 2: NON ALLOY AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
DIN EN 12252:2014-07
|
LPG equipment and accessories - Equipping of LPG road tankers |
ISO 17885:2015
|
Plastics piping systems Mechanical fittings for pressure piping systems Specifications |
BS EN 253 : 2009
|
DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - PIPE ASSEMBLY OF STEEL SERVICE PIPE, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
BS EN 746-2:2010
|
Industrial thermoprocessing equipment Safety requirements for combustion and fuel handling systems |
13/30231511 DC : 0
|
BS ISO 13577-2 - INDUSTRIAL FURNACES AND ASSOCIATED PROCESSING EQUIPMENT - SAFETY - PART 2: COMBUSTION AND FUEL HANDLING SYSTEMS |
I.S. EN 14420-5:2013
|
HOSE FITTINGS WITH CLAMP UNITS - PART 5: THREADED CONNECTIONS |
I.S. EN 746-2:2010
|
INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 2: SAFETY REQUIREMENTS FOR COMBUSTION AND FUEL HANDLING SYSTEMS |
I.S. EN 12953-2:2012
|
SHELL BOILERS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
I.S. EN 14420-2:2013
|
HOSE FITTINGS WITH CLAMP UNITS - PART 2: HOSE SIDE PARTS OF HOSE TAIL |
DIN EN 14420-5:2013-09
|
HOSE FITTINGS WITH CLAMP UNITS - PART 5: THREADED CONNECTIONS |
DIN EN 12252:2000-10
|
LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS |
I.S. EN 13941:2009
|
DESIGN AND INSTALLATION OF PREINSULATED BONDED PIPE SYSTEMS FOR DISTRICT HEATING |
I.S. EN 12252:2014
|
LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS |
I.S. EN 14394:2006
|
HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C |
DIN EN 14420-2:2013-09
|
Hose fittings with clamp units - Part 2: Hose side parts of hose tail |
DIN EN 14420-4:2013-09
|
Hose fittings with clamp units - Part 4: Flange connections |
I.S. EN 14420-4:2013
|
HOSE FITTINGS WITH CLAMP UNITS - PART 4: FLANGE CONNECTIONS |
I.S. EN 10079:2007
|
DEFINITION OF STEEL PRODUCTS |
I.S. EN 12007-3:2015
|
GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 3: SPECIFIC FUNCTIONAL REQUIREMENTS FOR STEEL |
KTA 3507 : 2014(R2017)
|
FACTORY TESTS, POST-REPAIR TESTS AND CERTIFICATION OF SATISFACTORY PERFORMANCE IN SERVICE OF MODULES AND DEVICES FOR THE INSTRUMENTATION AND CONTROLS OF THE SAFETY SYSTEM |
KTA 3407 : 2014
|
PIPE PENETRATIONS THROUGH THE REACTOR CONTAINMENT VESSEL |
KTA 3702 : 2014(R2017)
|
EMERGENCY POWER GENERATING FACILITIES WITH DIESEL-GENERATOR UNITS IN NUCLEAR POWER PLANTS |
ASME PV CODE 2A : 2017
|
BOILER AND PRESSURE VESSEL CODE - MATERIALS - FERROUS MATERIAL SPECIFICATIONS (BEGINNING TO SA-450) AND (SA-451 TO END) |
VDI 3431:2016-08
|
Bending of profiles - Testing notes for profile bending elements |
CEN ISO/TR 20172:2009
|
Welding - Grouping systems for materials - European materials (ISO/TR 20172:2009) |
07/30168488 DC : 0
|
BS EN 253 - DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - PIPE ASSEMBLY OF STEEL SERVICE PIPE, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
NF EN 15001-1 : 2009
|
GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
04/30118252 DC : DRAFT AUG 2004
|
EN 14917 - METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS |
PREN 13941 : DRAFT 2009
|
DESIGN AND INSTALLATION OF REINSULATED BONDED PIPE SYSTEMS FOR DISTRICT HEATING |
PD CEN ISO/TR 20172:2009
|
Welding. Grouping systems for materials. European materials |
DIN EN 14917 E : 2012
|
METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS |
PREN 14420-4 : DRAFT 2010
|
HOSE FITTINGS WITH CLAMP UNITS - PART 4: FLANGE CONNECTIONS |
EN 13445-2:2014/A2:2018
|
UNFIRED PRESSURE VESSELS - PART 2: MATERIALS |
BS EN 16125:2015
|
LPG Equipment and Accessories. Pipework systems and supports. LPG in liquid phase and vapour pressure phase |
I.S. EN 14917:2009
|
METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS |
DIN EN 746-2:2011-02
|
Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems |
DIN EN 448:2016-02
|
DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
DIN EN 676:2012-03 (Draft)
|
AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS |
DIN EN 14394 E : 2008
|
HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C |
DIN EN 14394:2008-12
|
HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C |
BS EN 12252:2014
|
LPG equipment and accessories. Equipping of LPG road tankers |
DIN EN 676:2008-11
|
Automatic forced draught burners for gaseous fuels (includes Amendment A2:2008) |
ONORM EN 676 : 2008
|
AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS |
UNE-EN 13445-4:2015
|
Unfired pressure vessels - Part 4: Fabrication |
UNI EN 10079 : 2007
|
DEFINITION OF STEEL PRODUCTS |
UNI EN 13941 : 2011
|
DESIGN AND INSTALLATION OF PREINSULATED BONDED PIPE SYSTEMS FOR DISTRICT HEATING |
UNI EN 14394 : 2008
|
HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREES C |
UNI EN 14420-2 : 2013
|
HOSE FITTINGS WITH CLAMP UNITS - PART 2: HOSE SIDE PARTS OF HOSE TAIL |
UNI EN 15001-1 : 2009
|
GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
UNI EN 12953-2 : 2012
|
SHELL BOILERS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
UNI EN 746-2 : 2011
|
INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 2: SAFETY REQUIREMENTS FOR COMBUSTION AND FUEL HANDLING SYSTEMS |
UNI EN 14420-5 : 2013
|
HOSE FITTINGS WITH CLAMP UNITS - PART 5: THREADED CONNECTIONS |
UNI EN 12252 : 2014
|
LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS |
UNI EN 14420-4 : 2013
|
HOSE FITTINGS WITH CLAMP UNITS - PART 4: FLANGE CONNECTIONS |
UNI EN 676 : 2008
|
AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS |
09/30186448 DC : 0
|
BS EN 13941 - DESIGN AND INSTALLATION OF REINSULATED BONDED PIPE SYSTEMS FOR DISTRICT HEATING |
13/30281067 DC : 0
|
BS EN 12252 - LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS |
PREN 676 : DRAFT 2012
|
FORCED DRAUGHT BURNERS FOR GASEOUS FUELS |
13/30276940 DC : 0
|
BS EN 16125 - LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG LIQUID PHASE AND VAPOUR PRESSURE PHASE |
UNI EN 14917 : 2012
|
METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS |
03/118134 DC : DRAFT NOV 2003
|
EN 12252 - EQUIPPING OF LIQUEFIED PETROLEUM GAS (LPG) ROAD TANKERS |
BS ISO 17885:2015
|
Plastics piping systems. Mechanical fittings for pressure piping systems. Specifications |
I.S. EN 15001-1:2009
|
GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
S.R. CEN ISO TR 20172:2009
|
WELDING - GROUPING SYSTEMS FOR MATERIALS - EUROPEAN MATERIALS |
BS EN 13480-2:2017+A3:2018
|
Metallic industrial piping Materials |
DIN EN 12952-14 E : 2004
|
WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 14: REQUIREMENTS FOR FLUE GAS DENOX-SYSTEMS USING LIQUEFIED PRESSURIZED AMMONIA AND AMMONIA WATER SOLUTION |
DIN EN 14015:2005-02
|
Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above |
DIN EN 253:2015-12
|
DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - PIPE ASSEMBLY OF STEEL SERVICE PIPE, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
BS EN 14394 : 2005
|
HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C |
BS EN 14620-2:2006
|
Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0°C and -165°C Metallic components |
UNE-EN 15001-1:2010
|
Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
BS EN 14879-1:2005
|
0rganic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Terminology, design and preparation of substrate |
UNE-EN 12953-2:2013
|
Shell boilers - Part 2: Materials for pressure parts of boilers and accessories |
BS EN 12952-14:2004
|
Water-tube boilers and auxiliary installations Requirements for flue gas DENOX-systems using liquified pressurized ammonia and ammonia water solution |
BS EN 14420-2:2013
|
Hose fittings with clamp units Hose side parts of hose tail |
BS EN 10079:2007
|
Definition of steel products |
EN 13480-2:2017
|
Metallic industrial piping - Part 2: Materials |
BS EN 676 : 2003
|
AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS |
UNE-EN 14420-5:2014
|
Hose fittings with clamp units - Part 5: Threaded connections |
BS EN 12007-3:2000
|
Gas supply systems. Pipelines for maximum operating pressure up to and including 16 bar Specific functional recommendations for steel |
BS EN 14420-4:2013
|
Hose fittings with clamp units Flange connections |
UNE-EN 448:2017
|
District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
BS EN 13941 : 2009
|
DESIGN AND INSTALLATION OF PREINSULATED BONDED PIPE SYSTEMS FOR DISTRICT HEATING |
BS ISO 13577-2:2014
|
Industrial furnaces and associated processing equipment. Safety Combustion and fuel handling systems |
UNE-EN 12007-3:2015
|
Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 3: Specific functional requirements for steel |
EN 14420-2:2013
|
Hose fittings with clamp units - Part 2: Hose side parts of hose tail |
EN 14394:2005+A1:2008
|
Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 °C |
EN 15001-1:2009
|
Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
EN 746-2:2010
|
Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems |
EN 13941:2009+A1:2010
|
Design and installation of preinsulated bonded pipe systems for district heating |
EN 253:2009+A2:2015
|
District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene |
EN 16125:2015
|
LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase |
EN 14015:2004
|
Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above |
EN 14420-4:2013
|
Hose fittings with clamp units - Part 4: Flange connections |
EN 14420-5:2013
|
Hose fittings with clamp units - Part 5: Threaded connections |
EN 14620-2:2006
|
Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 °C - Part 2: Metallic components |
EN 448:2015
|
District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
EN 14879-1:2005
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate |
PREN 10253-2 : DRAFT 2017
|
BUTT-WELDING PIPE FITTINGS - PART 2: NON ALLOY AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
PREN 12252 : DRAFT 2013
|
LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS |
BS EN 10253-2:2007
|
Butt-welding pipe fittings Non alloy and ferritic alloy steels with specific inspection requirements |
16/30342037 DC : 0
|
BS EN 13941-1 - DISTRICT HEATING PIPES - DESIGN AND INSTALLATION OF THERMAL INSULATED BONDED SINGLE AND TWIN PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - PART 1: DESIGN |
S.R. CEN ISO/TR 20172:2021
|
Welding - Grouping systems for materials - European materials (ISO/TR 20172:2021) |
BS EN 15001-1:2009
|
Gas infrastructure. Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations Detailed functional requirements for design, materials, construction, inspection and testing |
06/19977015 DC : DRAFT JULY 2006
|
BS EN 10344 - MALLEABLE CAST IRON FITTINGS WITH COMPRESSION ENDS FOR STEEL PIPES |
UNE-EN 13445-2:2015
|
Unfired pressure vessels - Part 2: Materials |
UNE-EN 50216-10:2010
|
Power transformer and reactor fittings - Part 10: Oil-to-air heat exchangers |
CEI EN 50216-10 : 2010
|
POWER TRANSFORMER AND REACTOR FITTINGS - PART 10: OIL-TO-AIR HEAT EXCHANGERS |
UNE-EN 14917:2011
|
Metal bellows expansion joints for pressure applications |
ISO 13577-2:2014
|
Industrial furnaces and associated processing equipment — Safety — Part 2: Combustion and fuel handling systems |
BS EN 448:2015
|
District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
I.S. EN 676:2003
|
AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS |
DIN EN 12953-2:2012-05
|
Shell boilers - Part 2: Materials for pressure parts of boilers and accessories |
BS EN 13445-4 : 2014
|
UNFIRED PRESSURE VESSELS - PART 4: FABRICATION |
BS EN 12953-2:2012
|
Shell boilers Materials for pressure parts of boilers and accessories |
ISO/TR 20172:2009
|
Welding Grouping systems for materials European materials |
EN 12007-3:2015
|
Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 3: Specific functional requirements for steel |
EN 12252:2014
|
LPG equipment and accessories - Equipping of LPG road tankers |
DIN EN 10079:2007-06
|
Definition of steel products |
ONORM EN 10253-2 : 2008
|
BUTT-WELDING PIPE FITTINGS - PART 2: NON ALLOY AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
EN 50216-10:2009
|
Power transformer and reactor fittings - Part 10: Oil-to-air heat exchangers |
UNE-EN 13480-2:2017
|
Metallic industrial piping - Part 2: Materials (Endorsed by Asociación Española de Normalización in September of 2019.) |