AS 2337.3:2020
|
Gas cylinder test stations Transportable gas cylinders - Periodic inspection and testing of composite cylinders (ISO 11623:2015, MOD) |
EN 1975:1999/A1:2003
|
TRANSPORTABLE GAS CYLINDERS - SPECIFICATION FOR THE DESIGN AND CONSTRUCTION OF REFILLABLE TRANSPORTABLE SEAMLESS ALUMINIUM AND ALUMINIUM ALLOY GAS CYLINDERS OF CAPACITY FROM 0.5 LITRE UP TO 150 LITRE |
ISO 75-1:2013
|
Plastics Determination of temperature of deflection under load Part 1: General test method |
ISO 8521:2009
|
Plastics piping systems Glass-reinforced thermosetting plastics (GRP) pipes Test methods for the determination of the apparent initial circumferential tensile strength |
ASTM D 3418 : 2015 : REDLINE
|
Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry |
EN 629-2 : 1996
|
TRANSPORTABLE GAS CYLINDERS - 25E TAPER THREAD FOR CONNECTION OF VALVES TO GAS CYLINDERS - GAUGE INSPECTION |
CGA C 14 : 2005(R2010)
|
PROCEDURES FOR FIRE TESTING OF DOT CYLINDER PRESSURE RELIEF DEVICE SYSTEMS |
ISO 11114-1:2012
|
Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 1: Metallic materials |
EN ISO 11120:2015
|
Gas cylinders - Refillable seamless steel tubes of water capacity between 150 l and 3000 l - Design, construction and testing (ISO 11120:2015) |
EN 720-2 : 1996
|
TRANSPORTABLE GAS CYLINDERS - GASES AND GAS MIXTURES - PART 2: DETERMINATION OF FLAMMABILITY AND OXIDIZING ABILITY OF GASES AND GAS MIXTURES |
ISO 2884-1:1999
|
Paints and varnishes — Determination of viscosity using rotary viscometers — Part 1: Cone-and-plate viscometer operated at a high rate of shear |
EN 1964-1:1999/AC:1999
|
TRANSPORTABLE GAS CYLINDERS - SPECIFICATION FOR THE DESIGN AND CONSTRUCTION OF REFILLABLE TRANSPORTABLE SEAMLESS STEEL GAS CYLINDERS OF WATER CAPACITIES FROM 0.5 LITRE UP TO AND INCLUDING 150 LITRES - PART 1: CYLINDERS MADE OF SEAMLESS STEEL WITH AN RM VALUE OF LESS THAN 1100 MPA |
EN 12862:2000
|
Transportable gas cylinders - Specification for the design and construction of refillable transportable welded aluminium alloy gas cylinders |
EN 1964-3:2000
|
Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres - Part 3: Cylinders made of seamless stainless steel with an Rm value of less than 1100 MPa |
ISO 3341:2000
|
Textile glass Yarns Determination of breaking force and breaking elongation |
ISO 13341:2010
|
Gas cylinders — Fitting of valves to gas cylinders |
EN 13322-2:2003/A1:2006
|
TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED STEEL GAS CYLINDERS - DESIGN AND CONSTRUCTION - PART 2: STAINLESS STEEL |
EN ISO 11114-3:2010
|
Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 3: Autogenous ignition test for non-metallic materials in oxygen atmosphere (ISO 11114-3:2010) |
EN ISO 13769:2009
|
Gas cylinders - Stamp marking (ISO 13769:2007) |
ISO 11114-3:2010
|
Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 3: Autogenous ignition test for non-metallic materials in oxygen atmosphere |
EN ISO 11114-1:2012/A1:2017
|
GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS - PART 1: METALLIC MATERIALS (ISO 11114-1: 2012/AMD 1:2017) |
ISO 1628-3:2010
|
Plastics Determination of the viscosity of polymers in dilute solution using capillary viscometers Part 3: Polyethylenes and polypropylenes |
ISO 527-2:2012
|
Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
EN 13322-1:2003/A1:2006
|
TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED STEEL GAS CYLINDERS - DESIGN AND CONSTRUCTION - PART 1: CARBON STEEL |
ISO 10618:2004
|
Carbon fibre — Determination of tensile properties of resin-impregnated yarn |
EN 1964-2 : 2001
|
TRANSPORTABLE GAS CYLINDERS - SPECIFICATION FOR THE DESIGN AND CONSTRUCTION OF REFILLABLE TRANSPORTABLE SEAMLESS STEEL GAS CYLINDERS OF WATER CAPACITIES FROM 0,5 LITRE UP TO AND INCLUDING 150 LITRES - PART 2: CYLINDERS MADE OF SEAMLESS STEEL WITH AN R[M] VALUE OF 1 100 MPA AND ABOVE |
ISO 11114-2:2013
|
Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 2: Non-metallic materials |
EN ISO 13341:2010/A1:2015
|
Gas cylinders - Fitting of valves to gas cylinders - Amendment 1 (ISO 13341:2010/Amd 1:2015) |
ISO 11120:2015
|
Gas cylinders Refillable seamless steel tubes of water capacity between 150 l and 3000 l Design, construction and testing |
ISO 3146:2000
|
Plastics — Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods |
ISO 175:2010
|
Plastics Methods of test for the determination of the effects of immersion in liquid chemicals |
EN 1800:2006
|
Transportable gas cylinders - Acetylene cylinders - Basic requirements, definitions and type testing |
ISO 11623:2015
|
Gas cylinders — Composite construction — Periodic inspection and testing |
EN 962:1996/A2:2000
|
TRANSPORTABLE GAS CYLINDERS - VALVE PROTECTION CAPS AND VALVE GUARDS FOR INDUSTRIAL AND MEDICAL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTS |
ISO 10156:2017
|
Gas cylinders — Gases and gas mixtures — Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets |
EN ISO 11114-2:2013
|
Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials (ISO 11114-2:2013) |
EN 1089-3:2011
|
Transportable gas cylinders - Gas cylinder identification (excluding LPG) - Part 3: Colour coding |
EN 3-1 : 1996
|
PORTABLE FIRE EXTINGUISHERS - PART 1: DESCRIPTION, DURATION OF OPERATION, CLASS A AND B FIRE TEST |
ISO 11114-4:2017
|
Transportable gas cylinders Compatibility of cylinder and valve materials with gas contents Part 4: Test methods for selecting steels resistant to hydrogen embrittlement |
ISO 15512:2016
|
Plastics Determination of water content |
EN ISO 11114-4:2017
|
Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting steels resistant to hydrogen embrittlement (ISO 11114-4:2017) |
EN 14427:2014
|
LPG equipment and accessories - Transportable refillable fully wrapped composite cylinders for LPG - Design and construction |
ASTM D 2290 : 2016-12
|
TEST METHOD FOR APPARENT HOOP TENSILE STRENGTH OF PLASTIC OR REINFORCED PLASTIC PIPE |
ASTM D 4018 : 2017 : REDLINE
|
Standard Test Methods for Properties of Continuous Filament Carbon and Graphite Fiber Tows |
EN ISO 11623:2015
|
Gas cylinders - Composite construction - Periodic inspection and testing (ISO 11623:2015, Corrected version 2017-02) |
ISO 14130:1997
|
Fibre-reinforced plastic composites — Determination of apparent interlaminar shear strength by short-beam method |
ISO 75-3:2004
|
Plastics — Determination of temperature of deflection under load — Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics |
EN 12257:2002
|
Transportable gas cylinders - Seamless, hoop-wrapped composite cylinders |
EN 1089-2 : 2002
|
TRANSPORTABLE GAS CYLINDERS - GAS CYLINDER IDENTIFICATION (EXCLUDING LPG) - PART 2: PRECAUTIONARY LABELS |
ISO 1133:2005
|
Plastics Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics |
EN 14638-1:2006
|
Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 1: Welded austenitic stainless steel cylinders made to a design justified by experimental methods |
ISO 13769:2007
|
Gas cylinders Stamp marking |
ISO 527-1:2012
|
Plastics Determination of tensile properties Part 1: General principles |
EN ISO 11439:2013
|
Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles (ISO 11439:2013) |
ISO 11439:2013
|
Gas cylinders — High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles |
EN 629-1 : 1996
|
TRANSPORTABLE GAS CYLINDERS - 25E TAPER THREAD FOR CONNECTION OF VALVES TO GAS CYLINDERS - PART 1: SPECIFICATION |