Skip to content
Please enter a keyword to search

  • EN 14140:2014/AC:2015

    Current The latest, up-to-date edition.

    LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION

    Available format(s): 

    Language(s): 

    Published date:  13-05-2015

    Publisher:  Comite Europeen de Normalisation

    Pure ENs are not available for sale, please purchase a suitable national adoption

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    Introduction
    1 Scope
    2 Normative references
    3 Terms, definitions and symbols
    4 Materials
    5 Design
    6 Construction and workmanship
    7 Tests and examinations
    8 Technical requirements for type approval
    9 Initial inspection and tests
    10 Marking
    11 Documentation
    12 Certification
    Annex A (normative) - Additional manufacturers markings
    Annex B (informative) - Over-moulded cylinder
    Annex C (informative) - Hot Air Balloon Cylinders
    Annex D (informative) - Environmental checklist
    Bibliography

    Abstract - (Show below) - (Hide below)

    This European Standard specifies the minimum requirements for the design, construction and testing during manufacture of transportable refillable welded steel Liquefied Petroleum Gas (LPG) cylinders, of water capacity from 0,5 l up to and including 150 l, exposed to temperatures of -20 °C to +65 °C.

    General Product Information - (Show below) - (Hide below)

    Committee TC 286
    Development Note Supersedes PREN 14140. (12/2014)
    Document Type Standard
    Publisher Comite Europeen de Normalisation
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    15/30320783 DC : 0 BS EN 1439 - LPG EQUIPMENT AND ACCESSORIES - PROCEDURE FOR CHECKING TRANSPORTABLE REFILLABLE LPG CYLINDERS BEFORE, DURING AND AFTER FILLING
    PREN 13952 : DRAFT 2015 LPG EQUIPMENT AND ACCESSORIES - FILLING PROCEDURES FOR LPG CYLINDERS
    12/30248690 DC : 0 BS EN 14894 - LPG EQUIPMENT AND ACCESSORIES - CYLINDER AND DRUM MARKING
    07/30163686 DC : 0 BS EN 1440 - LPG EQUIPMENT AND ACCESSORIES - PERIODIC INSPECTION OF TRANSPORTABLE REFILLABLE LPG CYLINDERS
    07/30163689 DC : 0 BS EN 1439 - LPG EQUIPMENT AND ACCESSORIES - PROCEDURE FOR CHECKING LPG CYLINDERS BEFORE, DURING AND AFTER FILLING
    04/30111685 DC : DRAFT MAR 2004 EN 14914 - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - ALTERNATIVE DESIGN AND CONSTRUCTION - PERIODIC INSPECTION
    DIN EN 14638-3:2012-06 Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 3: Welded carbon steel cylinders made to a design justified by experimental methods (includes Corrigendum AC:2012)
    I.S. EN 14638-3:2010 TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED RECEPTACLES OF A CAPACITY NOT EXCEEDING 150 LITRES - PART 3: WELDED CARBON STEEL CYLINDERS MADE TO A DESIGN JUSTIFIED BY EXPERIMENTAL METHODS
    UNE-EN 12816:2011 LPG equipment and accessories - Transportable refillable LPG cylinders - Disposal
    I.S. EN 12816:2010 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE LPG CYLINDERS - DISPOSAL
    EN 15609:2012 LPG equipment and accessories - LPG propulsion systems for boats, yachts and other craft
    DIN EN 14914:2006-03 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - ALTERNATIVE DESIGN AND CONSTRUCTION; PERIODIC INSPECTION
    EN 12816:2010 LPG equipment and accessories - Transportable refillable LPG cylinders - Disposal
    DIN EN 1439:2017-10 LPG equipment and accessories - Procedure for checking transportable refillable LPG cylinders before, during and after filling
    EN 14894:2013 LPG equipment and accessories - Cylinder and drum marking
    EN 1439:2017 LPG equipment and accessories - Procedure for checking transportable refillable LPG cylinders before, during and after filling
    I.S. EN 14913:2006 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - ALTERNATIVE DESIGN AND CONSTRUCTION; PROCEDURE FOR CHECKING BEFORE, DURING AND AFTER FILLING
    DIN EN 16728 E : 2016 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE LPG CYLINDERS OTHER THAN TRADITIONAL WELDED AND BRAZED STEEL CYLINDERS - PERIODIC INSPECTION
    DIN EN 14894 E : 2013 EQUIPEMENTS POUR GAZ DE PETROLE LIQUEFIE - MARQUAGE DES BOUTEILLES ET DES FUTS A PRESSION
    DIN EN 14427:2014-09 LPG equipment and accessories - Transportable refillable fully wrapped composite cylinders for LPG - Design and construction
    BS EN 12816:2010 LPG equipment and accessories. Transportable refillable LPG cylinders. Disposal
    I.S. EN 13952:2017 LPG EQUIPMENT AND ACCESSORIES - FILLING OPERATIONS FOR LPG CYLINDERS
    I.S. EN 1439:2017 LPG EQUIPMENT AND ACCESSORIES - PROCEDURE FOR CHECKING LPG CYLINDERS BEFORE, DURING AND AFTER FILLING
    I.S. EN 14894:2013 LPG EQUIPMENT AND ACCESSORIES - CYLINDER AND DRUM MARKING
    I.S. EN 14427:2014 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE FULLY WRAPPED COMPOSITE CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION
    DIN EN 15609:2012-07 LPG equipment and accessories - LPG propulsion systems for boats, yachts and other craft
    DIN EN 12816:2011-03 LPG equipment and accessories - Transportable refillable LPG cylinders - Disposal
    PREN 1439 : DRAFT 2015 LPG EQUIPMENT AND ACCESSORIES - PROCEDURE FOR CHECKING TRANSPORTABLE REFILLABLE LPG CYLINDERS BEFORE, DURING AND AFTER FILLING
    BS EN 14638-3:2010 Transportable gas cylinders. Refillable welded receptacles of a capacity not exceeding 150 litres Welded carbon steel cylinders made to a design justified by experimental methods
    06/30125306 DC : 0 EN 15609 - LPG EQUIPMENT AND ACCESSORIES - LPG PROPULSION SYSTEMS FOR BOATS, YACHTS AND OTHER CRAFT - INSTALLATION REQUIREMENTS
    04/30111682 DC : DRAFT MARCH 2004 EN 14913 - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - ALTERNATIVE DESIGN AND CONSTRUCTION - PROCEDURE FOR CHECKING BEFORE, DURING AND AFTER FILLING
    BS EN 15609:2012 LPG equipment and accessories. LPG propulsion systems for boats, yachts and other craft
    DIN EN 16728:2016-07 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE LPG CYLINDERS OTHER THAN TRADITIONAL WELDED AND BRAZED STEEL CYLINDERS - PERIODIC INSPECTION
    BS EN 16728 : 2016 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE LPG CYLINDERS OTHER THAN TRADITIONAL WELDED AND BRAZED STEEL CYLINDERS - PERIODIC INSPECTION
    PREN 14894 : DRAFT 2012 LPG EQUIPMENT AND ACCESSORIES - CYLINDER AND DRUM MARKING
    DIN EN 13952:2015-09 (Draft) LPG EQUIPMENT AND ACCESSORIES - FILLING OPERATIONS FOR LPG CYLINDERS
    DIN EN 14894:2013-06 LPG equipment and accessories - Cylinder and drum marking
    UNE-EN 14894:2013 LPG equipment and accessories - Cylinder and drum marking
    DIN EN 14427 E : 2014 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE FULLY WRAPPED COMPOSITE CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION
    UNI EN 12816 : 2011 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE LPG CYLINDERS - DISPOSAL
    UNI EN 14427 : 2014 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE FULLY WRAPPED COMPOSITE CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION
    I.S. EN 14914:2006 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - ALTERNATIVE DESIGN AND CONSTRUCTION - PERIODIC INSPECTION
    15/30320786 DC : 0 BS EN 13952 - LPG EQUIPMENT AND ACCESSORIES - FILLING PROCEDURES FOR LPG CYLINDERS
    PREN 15609 : DRAFT 2010 LPG EQUIPMENT AND ACCESSORIES - LPG PROPULSION SYSTEMS FOR BOATS, YACHTS AND OTHER CRAFT - INSTALLATION REQUIREMENTS
    UNI EN 14638-3 : 2010 TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED RECEPTACLES OF A CAPACITY NOT EXCEEDING 150 LITRES - PART 3: WELDED CARBON STEEL CYLINDERS MADE TO A DESIGN JUSTIFIED BY EXPERIMENTAL METHODS
    I.S. EN 16728:2016 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE LPG CYLINDERS OTHER THAN TRADITIONAL WELDED AND BRAZED STEEL CYLINDERS - PERIODIC INSPECTION
    I.S. EN 15609:2012 LPG EQUIPMENT AND ACCESSORIES - LPG PROPULSION SYSTEMS FOR BOATS, YACHTS AND OTHER CRAFT
    UNE-EN 16728:2016 LPG equipment and accessories - Transportable refillable LPG cylinders other than traditional welded and brazed steel cylinders - Periodic inspection
    BS EN 14427:2014 LPG equipment and accessories. Transportable refillable fully wrapped composite cylinders for LPG. Design and construction
    UNE-EN 1439:2017 LPG equipment and accessories - Procedure for checking transportable refillable LPG cylinders before, during and after filling
    UNE-EN 14427:2014 LPG equipment and accessories - Transportable refillable fully wrapped composite cylinders for LPG - Design and construction
    BS EN 14638-1:2006 Transportable gas cylinders. Refillable welded receptacles of a capacity not exceeding 150 litres Welded austenitic stainless steel cylinders made to a design justified by experimental methods
    BS EN 14894:2013 LPG equipment and accessories. Cylinder and drum marking
    BS EN 14914:2005 LPG equipment and accessories. Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG). Alternative design and construction. Periodic inspection
    EN 14427:2014 LPG equipment and accessories - Transportable refillable fully wrapped composite cylinders for LPG - Design and construction
    EN 14638-1:2006 Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 1: Welded austenitic stainless steel cylinders made to a design justified by experimental methods
    EN 14914:2005 LPG equipment and accessories - Transportable refillable welded steel cylinders for Liquefied Petroleum Gas (LPG) - Alternative design and construction; periodic inspection
    EN 13952:2017 LPG equipment and accessories - Filling operations for LPG cylinders
    EN 14913:2005 LPG equipment and accessories - Transportable refillable welded steel cylinders for Liquefied Petroleum Gas (LPG) - Alternative design and construction; procedure for checking before, during and after filling
    EN 14638-3:2010/AC:2012 TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED RECEPTACLES OF A CAPACITY NOT EXCEEDING 150 LITRES - PART 3: WELDED CARBON STEEL CYLINDERS MADE TO A DESIGN JUSTIFIED BY EXPERIMENTAL METHODS
    DIN EN 15609 E : 2012 LPG EQUIPMENT AND ACCESSORIES - LPG PROPULSION SYSTEMS FOR BOATS, YACHTS AND OTHER CRAFT
    10/30219378 DC : 0 BS EN 15609 - LPG EQUIPMENT AND ACCESSORIES - LPG PROPULSION SYSTEMS FOR BOATS, YACHTS AND OTHER CRAFT - INSTALLATION REQUIREMENTS
    04/30116681 DC : DRAFT JUL 2004 EN 14894 - LPG EQUIPMENT AND ACCESSORIES - LPG CYLINDER MARKING
    10/30204395 DC : 0 BS EN 14894 - LPG EQUIPMENT AND ACCESSORIES - CYLINDER AND DRUM MARKING
    UNE-EN 14638-3:2011 Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 3: Welded carbon steel cylinders made to a design justified by experimental methods
    DIN EN 1439:2015-10 (Draft) LPG EQUIPMENT AND ACCESSORIES - PROCEDURE FOR CHECKING TRANSPORTABLE REFILLABLE LPG CYLINDERS BEFORE, DURING AND AFTER FILLING
    UNI EN 15609 : 2012 LPG EQUIPMENT AND ACCESSORIES - LPG PROPULSION SYSTEMS FOR BOATS, YACHTS AND OTHER CRAFT
    BS EN 13952:2017 LPG equipment and accessories. Filling operations for LPG cylinders
    BS EN 14913:2005 LPG equipment and accessories. Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG). Alternative design and construction. Procedure for checking before, during and after filling
    BS EN 1439:2017 LPG equipment and accessories. Procedure for checking transportable refillable LPG cylinders before, during and after filling
    UNI EN 14894 : 2013 LPG EQUIPMENT AND ACCESSORIES - CYLINDER AND DRUM MARKING
    DIN EN 13952:2017-09 LPG EQUIPMENT AND ACCESSORIES - FILLING OPERATIONS FOR LPG CYLINDERS
    DIN EN 14638-1:2006-07 Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 1: Welded austenitic stainless steel cylinders made to a design justified by experimental methods
    DIN EN 14913:2006-03 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - ALTERNATIVE DESIGN AND CONSTRUCTION - PROCEDURE FOR CHECKING BEFORE, DURING AND AFTER FILLING

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 17636-1:2013 Non-destructive testing of welds — Radiographic testing — Part 1: X- and gamma-ray techniques with film
    ISO 11997-2:2013 Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 2: Wet (salt fog)/dry/humidity/UV light
    EN ISO 6520-1:2007 Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding (ISO 6520-1:2007)
    EN ISO 14021:2016 Environmental labels and declarations - Self-declared environmental claims (Type II environmental labelling) (ISO 14021:2016)
    EN 10120:2017 Steel sheet and strip for welded gas cylinders
    ISO 2812-2:2007 Paints and varnishes Determination of resistance to liquids Part 2: Water immersion method
    ISO 6520-1:2007 Welding and allied processes Classification of geometric imperfections in metallic materials Part 1: Fusion welding
    ISO 11114-1:2012 Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 1: Metallic materials
    EN ISO 15613:2004 Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test (ISO 15613:2004)
    EN ISO 6892-1:2016 Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016)
    ISO 9712:2012 Non-destructive testing Qualification and certification of NDT personnel
    EN ISO 3231:1997 Paints and varnishes - Determination of resistance to humid atmospheres containing sulfur dioxide (ISO 3231:1993)
    EN ISO 5173:2010/A1:2011 DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - BEND TESTS (ISO 5173:2009)
    ISO 14732:2013 Welding personnel Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials
    EN ISO 643:2012 Steels - Micrographic determination of the apparent grain size (ISO 643:2012)
    ISO 14024:1999 Environmental labels and declarations Type I environmental labelling Principles and procedures
    ISO 14021:2016 Environmental labels and declarations — Self-declared environmental claims (Type II environmental labelling)
    ISO 6892-1:2016 Metallic materials Tensile testing Part 1: Method of test at room temperature
    EN ISO 2409:2013 Paints and varnishes - Cross-cut test (ISO 2409:2013)
    EN ISO 11117:2008/AC:2010 GAS CYLINDERS - VALVE PROTECTION CAPS AND VALVE GUARDS - DESIGN, CONSTRUCTION AND TESTS
    ISO 9606-1:2012 Qualification testing of welders — Fusion welding — Part 1: Steels
    EN ISO 11997-2:2013 Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light (ISO 11997-2:2013)
    ISO 11363-1:2010 Gas cylinders 17E and 25E taper threads for connection of valves to gas cylinders Part 1: Specifications
    EN ISO 9227:2017 Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017)
    EN ISO 14732:2013 Welding personnel - Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials (ISO 14732:2013)
    EN ISO 11114-1:2012/A1:2017 GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS - PART 1: METALLIC MATERIALS (ISO 11114-1: 2012/AMD 1:2017)
    ISO 5173:2009 Destructive tests on welds in metallic materials — Bend tests
    EN ISO 9712:2012 Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2012)
    EN 1439:2017 LPG equipment and accessories - Procedure for checking transportable refillable LPG cylinders before, during and after filling
    EN 10028-7:2016 Flat products made of steels for pressure purposes - Part 7: Stainless steels
    EN ISO 19232-1:2013 Non-destructive testing - Image quality of radiographs - Part 1: Determination of the image quality value using wire-type image quality indicators (ISO 19232-1:2013)
    ISO 15614-1:2017 Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys
    EN ISO 19232-2:2013 Non-destructive testing - Image quality of radiographs - Part 2: Determination of the image quality value using step/hole-type image quality indicators (ISO 19232-2:2013)
    EN 10272:2016 Stainless steel bars for pressure purposes
    ISO 15609-1:2004 Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding
    EN ISO 17637:2016 Non-destructive testing of welds - Visual testing of fusion-welded joints (ISO 17637:2016)
    ISO 4624:2016 Paints and varnishes — Pull-off test for adhesion
    EN ISO 17639:2013 Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds (ISO 17639:2003)
    EN ISO 14025:2010 Environmental labels and declarations - Type III environmental declarations - Principles and procedures (ISO 14025:2006)
    ISO 15995:2006 Gas cylinders Specifications and testing of LPG cylinder valves Manually operated
    ISO 17636-2:2013 Non-destructive testing of welds — Radiographic testing — Part 2: X- and gamma-ray techniques with digital detectors
    EN 1442:2017 LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Design and construction
    ISO 17639:2003 Destructive tests on welds in metallic materials Macroscopic and microscopic examination of welds
    EN 10204:2004 Metallic products - Types of inspection documents
    EN ISO 4624:2016 Paints and varnishes - Pull-off test for adhesion (ISO 4624:2016)
    ISO 17637:2016 Non-destructive testing of welds Visual testing of fusion-welded joints
    EN ISO 15609-1:2004 Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004)
    ISO 643:2012 Steels Micrographic determination of the apparent grain size
    EN ISO 17636-2:2013 Non-destructive testing of welds - Radiographic testing - Part 2: X- and gamma-ray techniques with digital detectors (ISO 17636-2:2013)
    ISO 19232-1:2013 Non-destructive testing — Image quality of radiographs — Part 1: Determination of the image quality value using wire-type image quality indicators
    ISO 9227:2017 Corrosion tests in artificial atmospheres — Salt spray tests
    ISO 14025:2006 Environmental labels and declarations — Type III environmental declarations — Principles and procedures
    EN ISO 4136:2012 Destructive tests on welds in metallic materials - Transverse tensile test (ISO 4136:2012)
    EN 14894:2013 LPG equipment and accessories - Cylinder and drum marking
    ISO 19232-2:2013 Non-destructive testing — Image quality of radiographs — Part 2: Determination of the image quality value using step/hole-type image quality indicators
    ISO 4136:2012 Destructive tests on welds in metallic materials Transverse tensile test
    ISO 15613:2004 Specification and qualification of welding procedures for metallic materials Qualification based on pre-production welding test
    ISO 2409:2013 Paints and varnishes Cross-cut test
    EN ISO 17636-1:2013 Non-destructive testing of welds - Radiographic testing - Part 1: X- and gamma-ray techniques with film (ISO 17636-1:2013)
    EN 14717:2005 Welding and allied processes - Environmental check list
    EN ISO 9606-1:2017 Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013)
    EN ISO 15995:2010 Gas cylinders - Specifications and testing of LPG cylinder valves - Manually operated (ISO 15995:2006)
    ISO 11117:2008 Gas cylinders Valve protection caps and valve guards Design, construction and tests
    ISO 3231:1993 Paints and varnishes — Determination of resistance to humid atmospheres containing sulfur dioxide
    EN ISO 14245:2010 Gas cylinders - Specifications and testing of LPG cylinder valves - Self-closing (ISO 14245:2006)
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective