Skip to content
Please enter a keyword to search

  • EN 1935:2002/AC:2003

    Current The latest, up-to-date edition.

    BUILDING HARDWARE - SINGLE-AXIS HINGES - REQUIREMENTS AND TEST METHODS

    Available format(s): 

    Language(s): 

    Published date:  17-12-2003

    Publisher:  Comite Europeen de Normalisation

    Pure ENs are not available for sale, please purchase a suitable national adoption

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    Introduction
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 Classification
    5 Requirements
    6 Test apparatus
    7 Test methods
    8 Marking
    9 Evaluation of conformity
    Annex A (normative) - Classification of use and typical
            applications of hinges
    Annex B (normative) - Additional requirements for hinges
            intended for use on fire-resistant and/or
            smoke-control door assemblies
    Annex C (normative) - Hinges for use on burglar-resistant
            doors
    Annex D (informative) - Hinges for use with doors or windows
            of excess width
    Annex E (informative) - Hinges for doors fitted with door
            closers
    Annex F (informative) - Maintenance of hinges, especially
            those fitted to doors on escape routes
    Annex G (normative) - Graphs of allowable deformation and
            wear
    Annex H (normative) - Examples of test apparatus assemblies
    Annex J (normative) - Flow chart of test procedures
    Annex ZA (informative) - Clauses addressing the provisions
             of the EU Construction Products Directive (89/106/EEC)
    Bibliography

    General Product Information - (Show below) - (Hide below)

    Committee CEN/TC 33
    Document Type Test Method
    Publisher Comite Europeen de Normalisation
    Status Current

    Standards Referenced By This Book - (Show below) - (Hide below)

    I.S. EN 16654:2015 CHILD PROTECTIVE PRODUCTS - CONSUMER FITTED FINGER PROTECTION DEVICES FOR DOORS - SAFETY REQUIREMENTS AND TEST METHODS
    PREN 13126-15 : DRAFT 2017 QUINCAILLERIE POUR LE BATIMENT - FERRURES DE DOOR HEIGHT WINDOWS - REQUIREMENTS AND TEST METHODS - PART 15: ROLLERS FOR HORIZONTAL SLIDING AND HARDWARE FOR SLIDING FOLDING WINDOWS
    BS EN 16034:2014 Pedestrian doorsets, industrial, commercial, garage doors and openable windows. Product standard, performance characteristics. Fire resisting and/or smoke control characteristics
    UNI EN 1634-2 : 2009 FIRE RESISTANCE AND SMOKE CONTROL TESTS FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES AND ELEMENTS OF BUILDING HARDWARE - PART 2: FIRE RESISTANCE CHARACTERISATION TEST FOR ELEMENTS OF BUILDING HARDWARE
    DD CEN/TS 13126-8:2004 Building hardware, fittings for windows and door height windows. Requirements and test methods Tilt & turn, Tilt-First and Turn-Only hardware
    PREN 13126-8 : DRAFT 2016 BUILDING HARDWARE - HARDWARE FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 8: REQUIREMENTS AND TEST METHODS FOR TILT & TURN, TILT-FIRST AND TURN-ONLY HARDWARE
    17/30335089 DC : 0 BS EN 13126-6 - BUILDING HARDWARE - HARDWARE FOR WINDOWS AND DOOR HEIGHT WINDOWS - REQUIREMENTS AND TEST METHODS - PART 6: VARIABLE GEOMETRY STAY HINGES (WITH OR WITHOUT A FRICTION STAY)
    DIN EN 16654:2016-02 CHILD PROTECTIVE PRODUCTS - CONSUMER FITTED FINGER PROTECTION DEVICES FOR DOORS - SAFETY REQUIREMENTS AND TEST METHODS
    PREN 13126-6 : DRAFT 2017 BUILDING HARDWARE - HARDWARE FOR WINDOWS AND DOOR HEIGHT WINDOWS - REQUIREMENTS AND TEST METHODS - PART 6: VARIABLE GEOMETRY STAY HINGES (WITH OR WITHOUT A FRICTION STAY)
    NF EN 1634-2 : 2010 FIRE RESISTANCE AND SMOKE CONTROL TESTS FOR DOOR, SHUTTER AND OPENABLE WINDOWS AND ELEMENTS OF BUILDING HARDWARE - PART 2: FIRE RESISTANCE CHARACTERISATION TEST FOR ELEMENTS OF BUILDING HARDWARE
    I.S. EN 16034:2014 PEDESTRIAN DOORSETS, INDUSTRIAL, COMMERCIAL, GARAGE DOORS AND OPENABLE WINDOWS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - FIRE RESISTING AND/OR SMOKE CONTROL CHARACTERISTICS
    18/30361306 DC : 0 BS EN 13126-16 - BUILDING HARDWARE - HARDWARE FOR WINDOWS AND DOOR HEIGHT WINDOWS - REQUIREMENTS AND TEST METHODS - PART 16: HARDWARE FOR LIFT AND SLIDE WINDOWS
    UNI EN 16034 : 2014 PEDESTRIAN DOORSETS, INDUSTRIAL, COMMERCIAL, GARAGE DOORS AND OPENABLE WINDOWS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - FIRE RESISTING AND/OR SMOKE CONTROL CHARACTERISTICS
    I.S. EN 13126-1:2011 BUILDING HARDWARE - HARDWARE FOR WINDOWS AND DOOR HEIGHT WINDOWS - REQUIREMENTS AND TEST METHODS - PART 1: REQUIREMENTS COMMON TO ALL TYPES OF HARDWARE
    EN 13126-1:2011 Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 1: Requirements common to all types of hardware
    CEN/TS 13126-8:2004 Building hardware, fittings for windows and door height windows - Requirements and test procedures - Part 8: Tilt & turn, Tilt-First and Turn-Only hardware
    CEN/TS 13126-1:2004 Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 1: Requirements common to all types of fittings
    UNI EN 13126-1 : 2012 BUILDING HARDWARE - HARDWARE FOR WINDOWS AND DOOR HEIGHT WINDOWS - REQUIREMENTS AND TEST METHODS - PART 1: REQUIREMENTS COMMON TO ALL TYPES OF HARDWARE
    10/30218923 DC : DRAFT JUNE 2010 BS EN 13126-1 - BUILDING HARDWARE - HARDWARE FOR WINDOWS AND DOOR HEIGHT WINDOWS - REQUIREMENTS AND TEST METHODS - PART 1: REQUIREMENTS COMMON TO ALL TYPES OF HARDWARE
    PREN 14351-2 : DRAFT 2014 WINDOWS AND DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PART 2: INTERNAL PEDESTRIAN DOORSETS WITHOUT RESISTANCE TO FIRE AND /OR SMOKE LEAKAGE CHARACTERISTICS
    UNE-EN 16654:2016 Child protective products - Consumer fitted finger protection devices for doors - Safety requirements and test methods
    S.R. CEN/TR 15894:2009 BUILDING HARDWARE - DOOR FITTINGS FOR USE BY CHILDREN, ELDERLY AND DISABLED PEOPLE IN DOMESTIC AND PUBLIC BUILDINGS - A GUIDE FOR SPECIFIERS
    I.S. TS 13126-8:2004 BUILDING HARDWARE, FITTINGS FOR WINDOWS AND DOOR HEIGHT WINDOWS - REQUIREMENTS AND TEST PROCEDURES - PART 8: TILT & TURN, TILT-FIRST AND TURN-ONLY HARDWARE
    I.S. EN 14351-1:2006 WINDOWS AND DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PART 1: WINDOWS AND EXTERNAL PEDESTRIAN DOORSETS WITHOUT RESISTANCE TO FIRE AND/OR SMOKE LEAKAGE CHARACTERISTICS
    I.S. EN 14600:2005 DOORSETS AND OPENABLE WINDOWS WITH FIRE RESISTING AND/OR SMOKE CONTROL CHARACTERISTICS - REQUIREMENTS AND CLASSIFICATION
    PREN 13126-17 : DRAFT 2018 BUILDING HARDWARE - HARDWARE FOR WINDOWS AND DOOR HEIGHT WINDOWS - REQUIREMENTS AND TEST METHODS - PART 17: HARDWARE FOR TILT AND SLIDE WINDOWS
    11/30253413 DC : 0 BS EN 16361 - POWER OPERATED PEDESTRIAN DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PEDESTRIAN DOOR SETS, OTHER THAN SWING TYPE, INITIALLY DESIGNED FOR INSTALLATION WITH POWER OPERATION WITHOUT RESISTANCE TO FIRE AND SMOKE LEAKAGE CHARACTERISTICS
    I.S. EN 13126-8:2017 BUILDING HARDWARE - HARDWARE FOR WINDOWS AND DOOR HEIGHT WINDOWS - PART 8: REQUIREMENTS AND TEST METHODS FOR TILT AND TURN, TILT-FIRST AND TURN-ONLY HARDWARE
    14/30297827 DC : 0 BS EN 14351-2 - WINDOWS AND DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PART 2: INTERNAL PEDESTRIAN DOORSETS WITHOUT RESISTANCE TO FIRE AND /OR SMOKE LEAKAGE CHARACTERISTICS
    I.S. TS 13126-1:2004 BUILDING HARDWARE, FITTINGS FOR WINDOWS AND DOOR HEIGHT WINDOWS - REQUIREMENTS AND TEST METHODS - PART 1: REQUIREMENTS COMMON TO ALL TYPES OF FITTINGS
    I.S. EN 1634-2:2008 FIRE RESISTANCE AND SMOKE CONTROL TESTS FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES AND ELEMENTS OF BUILDING HARDWARE - PART 2: FIRE RESISTANCE CHARACTERISATION TEST FOR ELEMENTS OF BUILDING HARDWARE
    UNE-EN 16034:2015 Pedestrian doorsets, industrial, commercial, garage doors and openable windows - Product standard, performance characteristics - Fire resisting and/or smoke control characteristics
    PREN 13126-16 : DRAFT 2018 BUILDING HARDWARE - HARDWARE FOR WINDOWS AND DOOR HEIGHT WINDOWS - REQUIREMENTS AND TEST METHODS - PART 16: HARDWARE FOR LIFT AND SLIDE WINDOWS
    18/30361302 DC : 0 BS EN 13126-17 - BUILDING HARDWARE - HARDWARE FOR WINDOWS AND DOOR HEIGHT WINDOWS - REQUIREMENTS AND TEST METHODS - PART 17: HARDWARE FOR TILT AND SLIDE WINDOWS
    DIN EN 13126-1:2012-02 Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 1: Requirements common to all types of hardware
    BS EN 14600:2005 Doorsets and openable windows with fire resisting and/ or smoke control characteristics. Requirements and classification
    UNE-EN 13126-1:2012 Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 1: Requirements common to all types of hardware
    UNI EN 14600 : 2006 DOORSETS AND OPENABLE WINDOWS WITH FIRE RESISTING AND/OR SMOKE CONTROL CHARACTERISTICS - REQUIREMENTS AND CLASSIFICATION
    16/30335086 DC : 0 BS EN 13126-8 - BUILDING HARDWARE - HARDWARE FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 8: REQUIREMENTS AND TEST METHODS FOR TILT & TURN, TILT-FIRST AND TURN-ONLY HARDWARE
    DIN EN 16034:2014-12 PEDESTRIAN DOORSETS, INDUSTRIAL, COMMERCIAL, GARAGE DOORS AND OPENABLE WINDOWS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - FIRE RESISTANCE AND/OR SMOKE CONTROL CHARACTERISTICS
    DIN EN 1634-2:2009-05 FIRE RESISTANCE AND SMOKE CONTROL TESTS FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES AND ELEMENTS OF BUILDING HARDWARE - PART 2: FIRE RESISTANCE CHARACTERISATION TEST FOR ELEMENTS OF BUILDING HARDWARE
    BS EN 13126-8:2017 Building hardware. Hardware for windows and door height windows Requirements and test methods for Tilt and Turn, Tilt-First and Turn-Only hardware
    BS EN 16654:2015 Child protective products. Consumer fitted finger protection devices for doors. Safety requirements and test methods
    DD CEN/TS 13126-1:2004 Building hardware, fittings for windows and door height windows. Requirements and test methods Requirements common to all types of fittings
    EN 13126-8:2017 Building hardware - Hardware for windows and door height windows - Part 8: Requirements and test methods for Tilt and Turn, Tilt-First and Turn-Only hardware
    BS EN 13126-1:2011 Building hardware. Hardware for windows and door height windows. Requirements and test methods Requirements common to all types of hardware
    BS EN 14351-1 : 2006 WINDOWS AND DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PART 1: WINDOWS AND EXTERNAL PEDESTRIAN DOORSETS
    EN 16034:2014 Pedestrian doorsets, industrial, commercial, garage doors and openable windows - Product standard, performance characteristics - Fire resisting and/or smoke control characteristics
    EN 14351-1:2006+A2:2016 Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets
    EN 16654:2015 Child protective products - Consumer fitted finger protection devices for doors - Safety requirements and test methods
    EN 14600:2005 Doorsets and openable windows with fire resisting and/or smoke control characteristics - Requirements and classification
    EN 1634-2 : 2008 Fire resistance and smoke control tests for door, shutter and openable window assemblies and elements of building hardware - Part 2: Fire resistance characterisation test for elements of building hardware
    PD CEN/TR 15894:2009 Building hardware. Door fittings for use by children, elderly and disabled people in domestic and public buildings. A guide for specifiers
    13/30286138 DC : 0 BS EN 16654 - CHILD PROTECTIVE PRODUCTS - CONSUMER FITTED FINGER PROTECTION DEVICES FOR DOORS - SAFETY REQUIREMENTS AND TEST METHODS
    DIN EN 16654 E : 2016 CHILD PROTECTIVE PRODUCTS - CONSUMER FITTED FINGER PROTECTION DEVICES FOR DOORS - SAFETY REQUIREMENTS AND TEST METHODS
    06/30154477 DC : 0 EN 1634-2 - FIRE RESISTANCE AND SMOKE CONTROL TESTS FOR DOOR AND SHUTTER ASSEMBLIES, OPENABLE WINDOWS AND ELEMENTS OF BUILDING HARDWARE - PART 2: FIRE RESISTANCE CHARACTERISATION TEST FOR ELEMENTS OF BUILDING HARDWARE
    09/30185830 DC : DRAFT FEB 2009 BS EN 15887 - BUILDING HARDWARE - UNCONTROLLED DOOR CLOSING DEVICES FOR SINGLE ACTION DOORS - REQUIREMENTS AND TEST METHODS
    04/19991935 DC : DRAFT MAR 2004 BS EN 1634-2 - FIRE RESISTANCE TESTS FOR DOOR AND SHUTTER ASSEMBLIES - PART 2: FIRE DOOR HARDWARE - BUILDING HARDWARE FOR FIRE RESISTING DOORSETS AND OPENABLE WINDOWS
    UNI CEN/TR 15894 : 2009 BUILDING HARDWARE - DOOR FITTINGS FOR USE BY CHILDREN, ELDERLY AND DISABLED PEOPLE IN DOMESTIC AND PUBLIC BUILDINGS - A GUIDE FOR SPECIFIERS
    18/30361299 DC : 0 BS EN 13126-15 - QUINCAILLERIE POUR LE BATIMENT - FERRURES DE DOOR HEIGHT WINDOWS - REQUIREMENTS AND TEST METHODS - PART 15: ROLLERS FOR HORIZONTAL SLIDING AND HARDWARE FOR SLIDING FOLDING WINDOWS
    CEN/TR 15894:2009 Building hardware - Door fittings for use by children, elderly and disabled people in domestic and public buildings - A guide for specifiers
    DIN EN 14600:2006-03 DOORSETS AND OPENABLE WINDOWS WITH FIRE RESISTING AND/OR SMOKE CONTROL CHARACTERISTICS - REQUIREMENTS AND CLASSIFICATION
    UNE-EN 14351-1:2006 Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics

    Standards Referencing This Book - (Show below) - (Hide below)

    EN 1158:1997/A1:2002/AC:2006 BUILDING HARDWARE - DOOR COORDINATOR DEVICES - REQUIREMENTS AND TEST METHODS
    EN 1670:2007/AC:2008 BUILDING HARDWARE - CORROSION RESISTANCE - REQUIREMENTS AND TEST METHODS
    89/106/EEC : 1988 COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS
    BS 7352:1990 Specification for strength and durability performance of metal hinges for side hanging applications and dimensional requirements for template drilled hinges
    PREN 12519 : DRAFT 1996 DOORS AND WINDOWS - TERMINOLOGY
    ENV 1627:1999 Windows, doors, shutters - Burglar resistance - Requirements and classification
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective