EN 1990:2002/A1:2005/AC:2010

Current

Current The latest, up-to-date edition.

EUROCODE - BASIS OF STRUCTURAL DESIGN

Available format(s):

Language(s):

Published date: 21-04-2010

Publisher: Comite Europeen de Normalisation

Pure ENs are not available for sale, please purchase a suitable national adoption

Table of Contents - (Show below) - (Hide below)

FOREWORD
BACKGROUND OF THE EUROCODE PROGRAMME
STATUS AND FIELD OF APPLICATION OF EUROCODES
NATIONAL STANDARDS IMPLEMENTING EUROCODES
LINKS BETWEEN EUROCODES AND HARMONISED TECHNICAL
SPECIFICATIONS (ENs AND ETAs) FOR PRODUCTS
ADDITIONAL INFORMATION SPECIFIC TO EN 1990
NATIONAL ANNEX FOR EN 1990
SECTION 1 - GENERAL
  1.1 SCOPE
  1.2 NORMATIVE REFERENCES
  1.3 ASSUMPTIONS
  1.4 DISTINCTION BETWEEN PRINCIPLES AND APPLICATION RULES
  1.5 TERMS AND DEFINITIONS
  1.6 SYMBOLS
SECTION 2 - REQUIREMENTS
  2.1 BASIC REQUIREMENTS
  2.2 RELIABILITY MANAGEMENT
  2.3 DESIGN WORKING LIFE
  2.4 DURABILITY
  2.5 QUALITY MANAGEMENT
SECTION 3 - PRINCIPLES OF LIMIT STATES DESIGN
  3.1 GENERAL
  3.2 DESIGN SITUATIONS
  3.3 ULTIMATE LIMIT STATES
  3.4 SERVICEABILITY LIMIT STATES
  3.5 LIMIT STATE DESIGN
SECTION 4 - BASIC VARIABLES
  4.1 ACTIONS AND ENVIRONMENTAL INFLUENCES
  4.2 MATERIAL AND PRODUCT PROPERTIES
  4.3 GEOMETRICAL DATA
SECTION 5 - STRUCTURAL ANALYSIS AND DESIGN ASSISTED BY
            TESTING
  5.1 STRUCTURAL ANALYSIS
  5.2 DESIGN ASSISTED BY TESTING
SECTION 6 - VERIFICATION BY THE PARTIAL FACTOR METHOD
  6.1 GENERAL
  6.2 LIMITATIONS
  6.3 DESIGN VALUES
  6.4 ULTIMATE LIMIT STATES
  6.5 SERVICEABILITY LIMIT STATES
ANNEX A1 (NORMATIVE) - APPLICATION FOR BUILDINGS
      A1.1 FIELD OF APPLICATION
      A1.2 COMBINATIONS OF ACTIONS
      A1.3 ULTIMATE LIMIT STATES
      A1.4 SERVICEABILITY LIMIT STATES
ANNEX A2 (NORMATIVE) - APPLICATION FOR BRIDGES
National Annex for EN 1990 Annex A2
      A2.1 FIELD OF APPLICATION
      A2.2 COMBINATIONS OF ACTIONS
      A2.3 ULTIMATE LIMIT STATES
      A2.4 SERVICEABILITY AND OTHER SPECIFIC LIMIT STATES
ANNEX B (INFORMATIVE) - MANAGEMENT OF STRUCTURAL
        RELIABILITY FOR CONSTRUCTION WORKS
      B1 SCOPE AND FIELD OF APPLICATION
      B2 SYMBOLS
      B3 RELIABILITY DIFFERENTIATION
      B4 DESIGN SUPERVISION DIFFERENTIATION
      B5 INSPECTION DURING EXECUTION
      B6 PARTIAL FACTORS FOR RESISTANCE PROPERTIES
ANNEX C (INFORMATIVE) - BASIS FOR PARTIAL FACTOR DESIGN
        AND RELIABILITY ANALYSIS
      C1 SCOPE AND FIELD OF APPLICATIONS
      C2 SYMBOLS
      C3 INTRODUCTION
      C4 OVERVIEW OF RELIABILITY METHODS
      C5 RELIABILITY INDEX BETA
      C6 TARGET VALUES OF RELIABILITY INDEX BETA
      C7 APPROACH FOR CALIBRATION OF DESIGN VALUES
      C8 RELIABILITY VERIFICATION FORMATS IN EUROCODES
      C9 PARTIAL FACTORS IN EN 1990
      C10 PSI[0] FACTORS
ANNEX D (INFORMATIVE) - DESIGN ASSISTED BY TESTING
      D1 SCOPE AND FIELD OF APPLICATION
      D2 SYMBOLS
      D3 TYPES OF TESTS
      D4 PLANNING OF TESTS
      D5 DERIVATION OF DESIGN VALUES
      D6 GENERAL PRINCIPLES FOR STATISTICAL EVALUATIONS
      D7 STATISTICAL DETERMINATION OF A SINGLE PROPERTY
      D8 STATISTICAL DETERMINATION OF RESISTANCE MODELS
BIBLIOGRAPHY
ANNEX A2 (NORMATIVE) - APPLICATION FOR BRIDGES
National Annex for EN 1990 Annex A2
      A2.1 FIELD OF APPLICATION
      A2.2 COMBINATIONS OF ACTIONS
      A2.3 ULTIMATE LIMIT STATES
      A2.4 SERVICEABILITY AND OTHER SPECIFIC LIMIT STATES

Abstract - (Show below) - (Hide below)

Describes Principles and requirements for the safety, serviceability and durability of structures, describes the basis for their design and verification and gives guidelines for related aspects of structural reliability.

General Product Information - (Show below) - (Hide below)

Committee	CEN/TC 250
Development Note	Supersedes ENV 1991-1 (09/2002)
Document Type	Standard
ISBN
Pages
Published
Publisher	Comite Europeen de Normalisation
Status	Current

National Adoptions - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
DS EN 1990 : 2007 COR 2010	Identical
UNE-EN 1990:2003	Identical
NBN EN 1990 : 2002 + A1 2015	Identical
BS EN 1990:2002+A1:2005	Identical
NF EN 1990 : 2003 AMD 1 2006	Identical
I.S. EN 1990:2002	Identical
SN EN 1990 : 2002 AMD 1 2006	Identical
DIN EN 1990:2010-12	Identical
NS EN 1990 : 2002 + NA 2016	Identical
UNE-EN 1990:2019	Identical
PN EN 1990 : 2004 NA 2010	Identical
UNI EN 1990 : 2006	Identical
NEN EN 1990 : 2011	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

I.S. EN 13121-3:2016	GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 3: DESIGN AND WORKMANSHIP
PREN 13830 : DRAFT 2013	CURTAIN WALLING - PRODUCT STANDARD
UNE-EN 50341-1:2017	Overhead electrical lines exceeding AC 1 kV - Part 1: General requirements - Common specifications
04/19988807 DC : DRAFT AUG 2004	BS EN 14991 - PRECAST CONCRETE PRODUCTS - FOUNDATION ELEMENTS
BS EN 50119 : 2009	RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES
08/30192726 DC : 0	BS EN 1538 - EXECUTION OF SPECIAL GEOTECHNICAL WORK - DIAPHRAGM WALLS
11/30247279 DC : 0	BS EN 1337-1 - STRUCTURAL BEARINGS - PART 1: GENERAL
13/30279623 DC : 0	BS EN 16582-2 - DOMESTIC SWIMMING POOLS - PART 2: SPECIFIC REQUIREMENT INCLUDING SAFETY AND TEST METHODS FOR INGROUND POOLS
I.S. EN 1998-3:2005	EUROCODE 8: DESIGN OF STRUCTURES FOR EARTHQUAKE RESISTANCE - PART 3: ASSESSMENT AND RETROFITTING OF BUILDINGS
I.S. EN 1996-1-2:2005	EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN (INCLUDING IRISH NATIONAL ANNEX)
I.S. EN 1995-2:2005	EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 2: BRIDGES (INCLUDING IRISH NATIONAL ANNEX)
14/30266573 DC : 0	BS EN 12368 - TRAFFIC CONTROL EQUIPMENT - SIGNAL HEADS
11/30237554 DC : 0	BS EN 14732 - TIMBER STRUCTURES - PREFABRICATED WALL, FLOOR AND ROOF ELEMENTS - REQUIREMENTS
I.S. EN 1991-1-4:2005	EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-4: GENERAL ACTIONS - WIND ACTIONS (INCLUDING IRISH NATIONAL ANNEX)
16/30292774 DC : 0	BS ISO 10639 - PLASTICS PIPING SYSTEMS FOR PRESSURE AND NON-PRESSURE WATER SUPPLY - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) SYSTEMS BASED ON UNSATURATED POLYESTER (UP) RESIN
10/30228230 DC : 0	BS EN 13001-2 - CRANES - GENERAL DESIGN - PART 2: LOAD ACTIONS
PREN 14199 : DRAFT 2013	EXECUTION OF SPECIAL GEOTECHNICAL WORK - MICROPILES
17/30354239 DC : 0	BS EN 13369 - COMMON RULES FOR PRECAST CONCRETE PRODUCTS
UNI EN 15037-1 : 2008	PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 1: BEAMS
UNI EN 15512 : 2009	STEEL STATIC STORAGE SYSTEMS - ADJUSTABLE PALLET RACKING SYSTEMS - PRINCIPLES FOR STRUCTURAL DESIGN
I.S. EN 1993-6:2007	EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 6: CRANE SUPPORTING STRUCTURES (INCLUDING IRISH NATIONAL ANNEX)
12/30248282 DC : 0	BS EN 12811-4 - TEMPORARY WORKS EQUIPMENT - PART 4: PROTECTION FANS FOR SCAFFOLDS PERFORMANCE REQUIREMENTS AND PRODUCT DESIGN
DIN EN 1337-8 E : 2008	STRUCTURAL BEARINGS - PART 8: GUIDE BEARINGS AND RESTRAINT BEARINGS
13/30277116 DC : 0	BS EN 12930 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CALCULATIONS
08/30152055 DC : DRAFT APR 2008	BS EN 50518-1 - MONITORING AND ALARM RECEIVING CENTER - PART 1: LOCATION AND CONSTRUCTION REQUIREMENTS
DIN EN 13001-3-2 E : 2015	CRANES - GENERAL DESIGN - PART 3-2: LIMIT STATES AND PROOF OF COMPETENCE OF WIRE ROPES IN REEVING SYSTEMS
BS EN 1504-10:2017	Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Site application of products and systems and quality control of the works
UNE-EN 15129:2011	Anti-seismic devices
17/30349922 DC : 0	BS EN 13791 - ASSESSMENT OF IN-SITU COMPRESSIVE STRENGTH IN STRUCTURES AND PRECAST CONCRETE COMPONENTS
BS EN 1090-5:2017	Execution of steel structures and aluminium structures Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications
10/30193723 DC : 0	BS ISO 11336-1 - LARGE YACHTS STRENGTH, WEATHERTIGHTNESS AND WATERTIGHTNESS OF GLAZED OPENINGS - PART 1: DESIGN CRITERIA, MATERIALS, FRAMING AND TESTING OF INDEPENDENT GLAZED OPENINGS
UNE-EN 1993-1-10:2013	Eurocode 3: Design of steel structures - Part 1-10: Material toughness and through-thickness properties
BS ISO 11336-1:2012	Large yachts. Strength, weathertightness and watertightness of glazed openings Design criteria, materials, framing and testing of independent glazed openings
10/30212171 DC : 0	BS EN 15037-5 - PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 5: LIGHTWEIGHT BLOCKS FOR SIMPLE FORMWORK
BS EN 16927:2017	Mini-pools. Specific requirements including safety and test methods for mini-pools
PREN 12368 : DRAFT 2014	TRAFFIC CONTROL EQUIPMENT - SIGNAL HEADS
13/30280743 DC : 0	BS EN 14199 - EXECUTION OF SPECIAL GEOTECHNICAL WORK - MICROPILES
ACI SP 315 : 2017	ACI/FIB INTERNATIONAL SYMPOSIUM ON PUNCHING SHEAR IN STRUCTURAL CONCRETE SLABS: HONORING NEIL M. HAWKINS
DIN EN 14509:2013-12	SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
PREN 1536 : DRAFT 2008	EXECUTION OF SPECIAL GEOTECHNICAL WORK - BORED PILES
DIN EN 15037-3:2011-07	Precast concrete products - Beam-and-block floor systems - Part 3: Clay blocks (includes Amendment A1:2011)
07/30166420 DC : DRAFT AUG 2007	BS EN 1520 - PREFABRICATED REINFORCED COMPONENTS OF LIGHTWEIGHT AGGREGATE CONCRETE WITH OPEN STRUCTURE
DIN EN 15644 E : 2009	TRADITIONALLY DESIGNED PREFABRICATED STAIRS MADE OF SOLID WOOD - SPECIFICATIONS AND REQUIREMENTS
16/30322067 DC : 0	BS EN 13001-3-1:2012 AMD 2 - CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES
CEN/TR 16886 : 2016	GUIDANCE ON THE APPLICATION OF STATISTICAL METHODS FOR DETERMINING THE PROPERTIES OF MASONRY PRODUCTS
I.S. EN 50341-1:2012	OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS
PREN 13200-6 : DRAFT 2017	SPECTATOR FACILITIES - PART 6: DEMOUNTABLE STANDS
BS EN 14490:2010	Execution of special geotechnical works. Soil nailing
UNE-EN 1997-1:2016	Eurocode 7: Geotechnical design - Part 1: General rules.
BS EN 16869:2017	Design/construction of Via Ferratas
PREN 50119 : DRAFT 2017	RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES
UNI EN 16240 : 2014	LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
PREN 12871 : DRAFT 2011	WOOD-BASED PANELS - DETERMINATION OF PERFORMANCE CHARACTERISTICS FOR LOAD BEARING PANELS FOR USE IN FLOORS, ROOFS AND WALLS
DIN EN 1999-1-4:2010-05	Eurocode 9 - Design of aluminium structures - Part 1-4: Cold-formed structural sheeting; German version EN 1999-1-4:2007 + AC:2009
DIN EN 16927 E : 2017	MINI POOLS - SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR MINI POOLS
UNE-EN 1994-1-1:2013	Eurocode 4: Design of composite steel and concrete structures - Part 1-1: General rules and rules for buildings
BS EN 13445-3 : 2014	UNFIRED PRESSURE VESSELS - PART 3: DESIGN
NORSOK N 001 : REV 8	INTEGRITY OF OFFSHORE STRUCTURES
I.S. EN 15037-1:2008	PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 1: BEAMS
I.S. EN 16927:2017	MINI-POOLS - SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR MINI-POOLS
I.S. EN 15037-4:2010	PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 4: EXPANDED POLYSTYRENE BLOCKS
I.S. EN 16582-2:2015	DOMESTIC SWIMMING POOLS - PART 2: SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR INGROUND POOLS
S.R. CEN TS 1992-4-1:2009	DESIGN OF FASTENINGS FOR USE IN CONCRETE - PART 4-1: GENERAL
I.S. EN 16582-3:2015	DOMESTIC SWIMMING POOLS - PART 3: SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR ABOVEGROUND POOLS
I.S. EN 1999-1-2:2007	EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-2: STRUCTURAL FIRE DESIGN (INCLUDING IRISH NATIONAL ANNEX)
I.S. EN ISO 22282-1:2012	GEOTECHNICAL INVESTIGATION AND TESTING - GEOHYDRAULIC TESTING - PART 1: GENERAL RULES (ISO 22282-1:2012)
BS EN 16153 : 2013	LIGHT TRANSMITTING FLAT MULTIWALL POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
BS EN 50341-1:2012	OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS
I.S. EN 1993-4-1:2007	EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 4-1: SILOS
PREN 12602 : DRAFT 2015	PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE
UNI EN 15037-4 : 2013	PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 4: EXPANDED POLYSTYRENE BLOCKS
UNI EN 1999-1-5 : 2007	EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-5: SHELL STRUCTURES
BS EN 13001-3-1 : 2012	CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE
DD CEN/TS 1992-4-1:2009	DESIGN OF FASTENINGS FOR USE IN CONCRETE - PART 4-1: GENERAL
13/30286967 DC : 0	BS EN 1992-4 - EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 4: DESIGN OF FASTENINGS FOR USE IN CONCRETE
UNI EN 13001-3-1 : 2013	CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE
15/30320416 DC : 0	BS EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
16/30336501 DC : 0	BS EN 16951-2 - RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTIC CHARACTERISTICS
13/30281354 DC : 0	BS EN 16612 - GLASS IN BUILDING - DETERMINATION OF THE LOAD RESISTANCE OF GLASS PANES BY CALCULATION AND TESTING
NF EN 1993-6/NA : 2011	EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 6: CRANE SUPPORTING STRUCTURES - NATIONAL ANNEX TO NF EN 1993-6:2007 - CRANE SUPPORTING STRUCTURES
DIN EN 15129:2010-06	ANTI-SEISMIC DEVICES
17/30356436 DC : 0	BS EN 16612 - GLASS IN BUILDING - DETERMINATION OF THE LATERAL LOAD RESISTANCE OF GLASS PANES BY CALCULATION
UNI EN 1090-1 : 2012	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 1: REQUIREMENTS FOR CONFORMITY ASSESSMENT OF STRUCTURAL COMPONENTS
EN 16869:2017/AC:2018	DESIGN/CONSTRUCTION OF VIA FERRATAS
ISO/TR 24679-3:2015	Fire safety engineering Performance of structure in fire Part 3: Example of an open car park
EN 13445-3:2014/A4:2018	UNFIRED PRESSURE VESSELS - PART 3: DESIGN
I.S. EN 1993-1-10:2005	EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-10: MATERIAL TOUGHNESS AND THROUGH-THICKNESS PROPERTIES (INCLUDING IRISH NATIONAL ANNEX)
EN 1998-1:2004/A1:2013	EUROCODE 8: DESIGN OF STRUCTURES FOR EARTHQUAKE RESISTANCE - PART 1: GENERAL RULES, SEISMIC ACTIONS AND RULES FOR BUILDINGS
EN 1993-1-6:2007/A1:2017	EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-6: STRENGTH AND STABILITY OF SHELL STRUCTURES
DIN EN 12368:2015-09	TRAFFIC CONTROL EQUIPMENT - SIGNAL HEADS
EN 1995-1-1:2004/A2:2014	EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS
I.S. EN 1991-1-6:2005	EUROCODE 1 - ACTIONS ON STRUCTURES - PART 1-6: GENERAL ACTIONS - ACTIONS DURING EXECUTION
DIN EN 13500:2003-12	THERMAL INSULATION PRODUCTS FOR BUILDINGS - EXTERNAL THERMAL INSULATION COMPOSITE SYSTEMS (ETICS) BASED ON MINERAL WOOL - SPECIFICATION
DIN EN 1993-1-2:2010-12	Eurocode 3: Design of steel structures - Part 1-2: General rules - Structural fire design (includes Corrigendum AC:2009)
DIN EN 14250 E : 2010	TIMBER STRUCTURES - PRODUCT REQUIREMENTS FOR PREFABRICATED STRUCTURAL MEMBERS ASSEMBLED WITH PUNCHED METAL PLATE FASTENERS
DIN EN 1994-1-1:2010-12	Eurocode 4: Design of composite steel and concrete structures - Part 1-1: General rules and rules for buildings (includes Corrigendum AC:2009)
DIN EN 13499:2003-12	Thermal insulation products for buildings - External thermal insulation composite systems (ETICS) based on expanded polystyrene - Specification; German version EN 13499:2003
DIN EN 14879-1 E : 2005	ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 1: TERMINOLOGY, DESIGN AND PREPARATION OF SUBSTRATE
DIN EN 1996-1-2:2011-04	Eurocode 6: Design of masonry structures - Part 1-2: General rules - Structural fire design (includes Corrigendum AC:2010)
BS EN 14358:2016	Timber structures. Calculation and verification of characteristic values
BS EN 13499:2003	THERMAL INSULATION PRODUCTS FOR BUILDINGS - EXTERNAL THERMAL INSULATION COMPOSITE SYSTEMS (ETICS) BASED ON EXPANDED POLYSTYRENE - SPECIFICATION
PD ISO/TS 20656-1:2017	Plastics piping systems. General rules for structural design of glass-reinforced thermosetting plastics (GRP) pipes Buried pipes
DIN EN 14879-1:2005-12	Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate
UNE-EN 13200-6:2013	Spectator facilities - Part 6 : Demountable (temporary) stands
BS EN 1995-1-1 : 2012	EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS
BS EN 13451-1 : 2011	SWIMMING POOL EQUIPMENT - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS
BS EN 14731:2005	Execution of special geotechnical works. Ground treatment by deep vibration
BS EN 1992-1-1 : 2004	EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
BS EN 12811-2:2004	Temporary works equipment Information on materials
BS EN 1991-1-7 : 2006	EUROCODE 1 - ACTIONS ON STRUCTURES - PART 1-7: GENERAL ACTIONS - ACCIDENTAL ACTIONS
BS EN ISO 19902 : 2007	PETROLEUM AND NATURAL GAS INDUSTRIES - FIXED STEEL OFFSHORE STRUCTURES
BS EN 1996-2:2006	Eurocode 6. Design of masonry structures Design considerations, selection of materials and execution of masonry
14/30278953 DC : 0	BS ISO 17842-1 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE
BS EN 12699:2015	EXECUTION OF SPECIAL GEOTECHNICAL WORKS - DISPLACEMENT PILES
13/30272150 DC : 0	BS EN 13814 - FAIRGROUND AND AMUSEMENT PARK MACHINERY AND STRUCTURE - SAFETY
BS EN 1991-1-2:2002	Eurocode 1. Actions on structures General actions. Actions on structures exposed to fire
BS EN 1998-2 : 2005	EUROCODE 8 - DESIGN OF STRUCTURES FOR EARTHQUAKE RESISTANCE - PART 2: BRIDGES
BS EN 1993-1-4 : 2006	EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-4: GENERAL RULES - SUPPLEMENTARY RULES FOR STAINLESS STEELS
BS EN 1993-5:2007	Eurocode 3. Design of steel structures Piling
DIN EN 1537:2001-01	EXECUTION OF SPECIAL GEOTECHNICAL WORKS - GROUND ANCHORS
I.S. EN 14358:2016	TIMBER STRUCTURES - CALCULATION AND VERIFICATION OF CHARACTERISTIC VALUES
DIN EN 13084-2:2007-08	Free-standing chimneys - Part 2: Concrete chimneys
I.S. EN 12699:2015	EXECUTION OF SPECIAL GEOTECHNICAL WORKS - DISPLACEMENT PILES
EN 13500:2003	Thermal insulation products for buildings - External thermal insulation composite systems (ETICS) based on mineral wool - Specification
EN 12811-2:2004	Temporary works equipment - Part 2: Information on materials
EN 1069-1:2017	Water slides - Part 1: Safety requirements and test methods
EN 1337-8:2007	Structural bearings - Part 8: Guide Bearings and Restraint Bearings
DIN EN 1993-6:2010-12	Eurocode 3: Design of steel structures - Part 6: Crane supporting structures (includes Corrigendum AC:2009)
EN 12930:2015	Safety requirements for cableway installations designed to carry persons - Calculations
CEN/TS 1992-4-1:2009	Design of fastenings for use in concrete - Part 4-1: General
I.S. EN 1998-2:2006	EUROCODE 8 - DESIGN OF STRUCTURES FOR EARTHQUAKE RESISTANCE - PART 2: BRIDGES
EN 13084-2:2007	Free-standing chimneys - Part 2: Concrete chimneys
EN 13499:2003	Thermal insulation products for buildings - External thermal insulation composite systems (ETICS) based on expanded polystyrene - Specification
DIN EN 13830:2015-07	CURTAIN WALLING - PRODUCT STANDARD
DIN EN 1992-3:2011-01	Eurocode 2: Design of concrete structures - Part 3: Liquid retaining and containment structures; German version EN 1992-3:2006
DIN EN 1090-5:2017-07	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
EN 13224:2011	Precast concrete products - Ribbed floor elements
EN 12602:2016	Prefabricated reinforced components of autoclaved aerated concrete
DIN EN 1991-1-4:2010-12	EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-4: GENERAL ACTIONS - WIND ACTIONS
EN 12368:2015	Traffic control equipment - Signal heads
DIN EN 12811-2:2004-04	Temporary works equipment - Part 2: Information on materials; German version EN 12811-2:2004
CEN/TR 15728:2016	Design and use of inserts for lifting and handling of precast concrete elements
CEN/TR 1317-6 : 2012	ROAD RESTRAINT SYSTEMS - PART 6: PEDESTRIAN RESTRAINT SYSTEM - PEDESTRIAN PARAPETS
CEN/TR 14862:2004	Precast concrete products - Full-scale testing requirements in standards on precast concrete products
DIN EN 1069-1:2017-11	WATER SLIDES - PART 1: SAFETY REQUIREMENTS AND TEST METHODS
EN 1090-1:2009+A1:2011	Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components
EN 12871:2013	Wood-based panels - Determination of performance characteristics for load bearing panels for use in floors, roofs and walls
EN 15528:2015	Railway applications - Line categories for managing the interface between load limits of vehicles and infrastructure
CEN/TS 13001-3-1:2004/AC:2006	CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES
DIN EN 1090-2:2011-10	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
EN 50583-2:2016	Photovoltaics in buildings - Part 2: BIPV systems
EN 1337-4:2004/AC:2007	STRUCTURAL BEARINGS - PART 4: ROLLER BEARINGS
EN 1337-5:2005	Structural bearings - Part 5: Pot bearings
EN 12843 : 2004	PRECAST CONCRETE PRODUCTS - MASTS AND POLES
EN 13121-3:2016	GRP tanks and vessels for use above ground - Part 3: Design and workmanship
EN 1337-6:2004	Structural bearings - Part 6: Rocker bearings
EN 12812:2008	Falsework - Performance requirements and general design
EN 14250:2010	Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners
DIN EN 1998-4:2007-01	Eurocode 8: Design of structures for earthquake resistance - Part 4: Silos, tanks and pipelines
VDI/BV-BS 6205 Blatt 1:2012-04	Lifting inserts and lifting systems for precast concrete elements - Principles, design, applications - General principles
VDI/BV-BS 6205 Blatt 2:2012-04	Lifting inserts and lifting systems for precast concrete elements - Principles, design, applications - Production and placing on the market
I.S. EN 1994-1-2:2005	EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
DIN EN 16582-3 E : 2015	DOMESTIC SWIMMING POOLS - PART 3: SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR ABOVEGROUND POOLS
09/30198700 DC : 0	BS EN 15037-4 - PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 4: EXPANDED POLYSTYRENE BLOCKS
DIN EN 15898 E : 2011	CONSERVATION OF CULTURAL PROPERTY - MAIN GENERAL TERMS AND DEFINITIONS
17/30331222 DC : 0	BS EN 16432-1 - RAILWAY APPLICATIONS - BALLASTLESS TRACK SYSTEMS - PART 1: GENERAL REQUIREMENT
13/30277104 DC : 0	BS EN 14389-1 - ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS
I.S. EN 1998-6:2005	EUROCODE 8: DESIGN OF STRUCTURES FOR EARTHQUAKE RESISTANCE - PART 6: TOWERS, MASTS AND CHIMNEYS
I.S. EN 1794-1:2018	ROAD TRAFFIC NOISE REDUCING DEVICES - NON-ACOUSTIC PERFORMANCE - PART 1: MECHANICAL PERFORMANCE AND STABILITY REQUIREMENTS
10/30214897 DC : 0	BS ISO 3898 - BASES FOR DESIGN OF STRUCTURES - NAMES AND SYMBOLS OF PHYSICAL QUANTITIES - GENERIC QUANTITIES
13/30266550 DC : 0	BS EN 14509 - SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
DIN EN 15898:2011-12	CONSERVATION OF CULTURAL PROPERTY - MAIN GENERAL TERMS AND DEFINITIONS
ISO/TR 24679-6:2017	Fire safety engineering Performance of structures in fire Part 6: Example of an eight-storey office concrete building
DIN EN 15037-4:2013-08	PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 4: EXPANDED POLYSTYRENE BLOCKS
15/30328805 DC : 0	BS EN 16927 - MINI POOLS - SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR MINI POOLS
I.S. EN 1991-1-2:2002	EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-2: GENERAL ACTIONS - ACTIONS ON STRUCTURES EXPOSED TO FIRE
I.S. EN 1993-5:2007	EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 5: PILING (INCLUDING IRISH NATIONAL ANNEX)
15/30327977 DC : 0	BS EN 1504-10 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS
BS EN 1090-1 : 2009	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 1: REQUIREMENTS FOR CONFORMITY ASSESSMENT OF STRUCTURAL COMPONENTS
I.S. EN 1991-1-5:2003	EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-5: GENERAL ACTIONS - THERMAL ACTIONS (INCLUDING IRISH NATIONAL ANNEX)
BS EN 50583-1:2016	Photovoltaics in buildings BIPV modules
UNI EN 1794-1 : 2011	ROAD TRAFFIC NOISE REDUCING DEVICES - NON-ACOUSTIC PERFORMANCE - PART 1: MECHANICAL PERFORMANCE AND STABILITY REQUIREMENTS
08/30178840 DC : DRAFT AUG 2008	BS EN 15037-3 - PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 3: CLAY BLOCKS
BS EN 50583-2:2016	PHOTOVOLTAICS IN BUILDINGS - PART 2: BIPV SYSTEMS
UNI EN 15644 : 2009	TRADITIONALLY DESIGNED PREFABRICATED STAIRS MADE OF SOLID WOOD - SPECIFICATIONS AND REQUIREMENTS
I.S. EN 16869:2017	DESIGN/CONSTRUCTION OF VIA FERRATAS
04/19987163 DC : DRAFT OCT 2004	EN 13200-6 - SPECTATOR FACILITIES - PART 6: DEMOUNTABLE (TEMPORARY) STANDS
12/30272145 DC : 0	BS EN 16508 - TEMPORARY WORKS EQUIPMENT - ENCAPSULATION CONSTRUCTIONS - PERFORMANCE REQUIREMENTS AND GENERAL DESIGN
DIN EN 16582-1 E : 2015	DOMESTIC SWIMMING POOLS - PART 1: GENERAL REQUIREMENTS INCLUDING SAFETY AND TEST METHODS
11/30215604 DC : 0	BS IEC 60913 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES
04/30124987 DC : DRAFT NOV 2004	EN 1090-1 - STEEL AND ALUMINIUM STRUCTURAL COMPONENTS - GENERAL DELIVERY CONDITIONS
PD ISO/TR 24679-6:2017	Fire safety engineering. Performance of structures in fire Example of an eight-storey office concrete building
PD CEN/TR 16949:2016	ROAD RESTRAINT SYSTEM - PEDESTRIAN RESTRAINT SYSTEM - PEDESTRIAN PARAPETS
04/30123649 DC : DRAFT OCT 2004	EN 13200-5 - SPECTATOR FACILITIES - PART 5: TELESCOPIC STANDS
17/30337809 DC : DRAFT JAN 2017	BS EN 15512 - STEEL STATIC STORAGE SYSTEMS - ADJUSTABLE PALLET RACKING SYSTEMS - PRINCIPLES FOR STRUCTURAL DESIGN
DIN EN 16481:2014-09	TIMBER STAIRS - STRUCTURAL DESIGN
15/30321787 DC : 0	BS EN 16869 - DESIGN/CONSTRUCTION OF VIA FERRATA
DIN EN 12602:2015-12 (Draft)	PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE
DIN EN 16582-3:2015-11	DOMESTIC SWIMMING POOLS - PART 3: SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR ABOVEGROUND POOLS
CEN/TR 16949:2016	Road restraint system - Pedestrian restraint system - Pedestrian parapets
PREN 14389-2 : DRAFT 2013	ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS
DIN EN 15037-1:2008-07	Precast concrete products - Beam-and-block floor systems - Part 1: Beams
12/30261638 DC : 0	BS EN 13001-2 - CRANE SAFETY - GENERAL DESIGN - PART 2: LOAD ACTIONS
13/30281348 DC : 0	BS EN 13830 - CURTAIN WALLING - PRODUCT STANDARD
10/30218985 DC : DRAFT JUNE 2010	BS EN 13369 - COMMON RULES FOR PRECAST CONCRETE PRODUCTS
BS EN ISO 22282-1:2012	Geotechnical investigation and testing. Geohydraulic testing General rules
BS EN 15644:2008	TRADITIONALLY DESIGNED PREFABRICATED STAIRS MADE OF SOLID WOOD - SPECIFICATIONS AND REQUIREMENTS
15/30320413 DC : 0	BS EN 16382 - THERMAL INSULATION PRODUCTS FOR BUILDING APPLICATIONS - DETERMINATION OF THE PULL-THROUGH RESISTANCE OF PLATE ANCHORS THROUGH THERMAL INSULATION PRODUCTS
PREN 1090-2 : DRAFT 2015	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
08/30123706 DC : DRAFT APR 2008	ISO 22282-1 - GEOTECHNICAL INVESTIGATION AND TESTING - GEOHYDRAULIC TESTING - PART 1: GENERAL RULES
UNI CEN/TS 1992-4-1 : 2009	DESIGN OF FASTENINGS FOR USE IN CONCRETE - PART 4-1: GENERAL
PD CEN/TR 1295-4:2015	STRUCTURAL DESIGN OF BURIED PIPELINES UNDER VARIOUS CONDITIONS OF LOADING - PART 4: PARAMETERS FOR RELIABILITY OF THE DESIGN
BS EN 1999-1-2:2007	Eurocode 9. Design of aluminium structures Structural fire design
I.S. EN 16932-1:2018	DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - PUMPING SYSTEMS - PART 1: GENERAL REQUIREMENTS
I.S. EN 13001-3-2:2014	CRANES - GENERAL DESIGN - PART 3-2: LIMIT STATES AND PROOF OF COMPETENCE OF WIRE ROPES IN REEVING SYSTEMS
PREN 13107 : DRAFT 2013	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CIVIL ENGINEERING WORKS
PREN 13001-2 : DRAFT 2012	CRANE SAFETY - GENERAL DESIGN - PART 2: LOAD ACTIONS
UNI EN 15037-3 : 2011	PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 3: CLAY BLOCKS
UNE-EN 1090-2:2011	Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures
UNI CEN/TR 1317-6 : 2012	ROAD RESTRAINT SYSTEMS - PART 6: PEDESTRIAN RESTRAINT SYSTEM - PEDESTRIAN PARAPETS
UNE-EN 1994-2:2013	Eurocode 4 - Design of composite steen and concrete structures - Part 2: General rules and rules for bridges
BS EN 15037-3 : 2009	PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 3: CLAY BLOCKS
ABS 0236 : 2016	GUIDE FOR CERTIFICATION OF OFFSHORE ACCESS GANGWAYS
I.S. EN 1069-1:2017	WATER SLIDES - PART 1: SAFETY REQUIREMENTS AND TEST METHODS
I.S. EN 12811-4:2013	TEMPORARY WORKS EQUIPMENT - PART 4: PROTECTION FANS FOR SCAFFOLDS - PERFORMANCE REQUIREMENTS AND PRODUCT DESIGN
BS EN 13369:2013	Common rules for precast concrete products
I.S. EN 1993-1-6:2007	EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-6: STRENGTH AND STABILITY OF SHELL STRUCTURES
BS EN 1999-1-1 : 2007	EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES
I.S. EN 1999-1-1:2007	EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES (INCLUDING IRISH NATIONAL ANNEX)
UNE-EN 1090-5:2017	Execution of steel structures and aluminium structures - Part 5: Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications
BS EN 15129:2009	Anti-seismic devices
EN 15129:2018 (edition 2)	Anti-seismic devices
18/30365863 DC : 0	BS EN 1337-1 - STRUCTURAL BEARINGS - PART 1: GENERAL
UNI CEN/TR 15728 : 2010	DESIGN AND USE OF INSERTS FOR LIFTING AND HANDLING OF PRECAST CONCRETE ELEMENTS
UNI EN 15129 : 2009	ANTI-SEISMIC DEVICES
PREN 752 : DRAFT 2015	DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - SEWER SYSTEM MANAGEMENT
EN 50341-1:2012	Overhead electrical lines exceeding AC 1 kV - Part 1: General requirements - Common specifications
UNE-EN 13374:2013	Temporary edge protection systems - Product specification - Test methods
UNI EN 1090-2 : 2011	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
I.S. EN 50119:2009	RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES
DIN EN 12843:2004-11	Precast concrete products - Masts and poles
DIN EN 1537:2014-07	EXECUTION OF SPECIAL GEOTECHNICAL WORKS - GROUND ANCHORS
DIN EN 14991 E : 2007	PRECAST CONCRETE PRODUCTS - FOUNDATION ELEMENTS
DIN EN 12699:2015-07	EXECUTION OF SPECIAL GEOTECHNICAL WORKS - DISPLACEMENT PILES
DIN EN 13200-6:2013-03	SPECTATOR FACILITIES - PART 6: DEMOUNTABLE (TEMPORARY) STANDS
DIN EN 12871:2013-09	Wood-based panels - Determination of performance characteristics for load bearing panels for use in floors, roofs and walls
DIN EN 1520:2011-06	Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement
DIN EN 1993-4-3:2010-12	EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 4-3: PIPELINES
DIN EN 13107:2015-09	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CIVIL ENGINEERING WORKS
DIN EN 1993-1-9:2010-12	Eurocode 3: Design of steel structures - Part 1-9: Fatigue (includes Corrigendum AC:2009)
DIN EN 1538:2015-10	EXECUTION OF SPECIAL GEOTECHNICAL WORK - DIAPHRAGM WALLS
DIN EN 13084-8:2005-08	FREE-STANDING INDUSTRIAL CHIMNEYS - PART 8: DESIGN AND EXECUTION OF MAST CONSTRUCTION WITH SATELLITE COMPONENTS
DIN EN 14199:2015-07	EXECUTION OF SPECIAL GEOTECHNICAL WORK - MICROPILES
DIN EN 1337-3:2005-07	Structural bearings - Part 3: Elastomeric bearings
DIN EN 14475:2006-04	EXECUTION OF SPECIAL GEOTECHNICAL WORKS - REINFORCED FILL
DIN EN 1995-1-2 E : 2010	EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-2: GENERAL - STRUCTURAL FIRE DESIGN
DIN EN 1995-1-1:2010-12	Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for buildings (includes Corrigendum AC:2006 + Amendment A1:2008)
DIN EN 1337-6:2004-08	Structural bearings - Part 6: Rocker bearings
DIN EN 1337-5:2005-07	Structural bearings - Part 5: Pot bearings
DIN EN 14250:2010-05	Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners
BS EN 1993-1-10:2005	Eurocode 3. Design of steel structures Material toughness and through-thickness properties
BS EN 12871:2013	Wood-based panels. Determination of performance characteristics for load bearing panels for use in floors, roofs and walls
BS EN 40-3-1:2013	Lighting columns Design and verification. Specification for characteristic loads
BS EN 14991:2007	PRECAST CONCRETE PRODUCTS - FOUNDATION ELEMENTS
UNE-EN 13830:2016	Curtain walling - Product standard
BS EN 1991-2:2003	Eurocode 1. Actions on structures Traffic loads on bridges
BS EN 1991-3:2006	Eurocode 1. Actions on structures Actions induced by cranes and machinery
BS EN 12368:2015	Traffic control equipment. Signal heads
BS EN 1538 : 2010	EXECUTION OF SPECIAL GEOTECHNICAL WORKS - DIAPHRAGM WALLS
BS EN 14389-1:2015	Road traffic noise reducing devices. Procedures for assessing long term performance Acoustical characteristics
BS EN 1995-2:2004	Eurocode 5. Design of timber structures Bridges
BS EN 13200-6:2012	Spectator facilities Demountable (temporary) stands
UNE-EN 40-3-2:2013	Lighting columns - Part 3-2: Design and verification - Verification by testing
BS EN 1337-5:2005	STRUCTURAL BEARINGS - PART 5: POT BEARINGS
DIN EN 752:2015-10 (Draft)	DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - SEWER SYSTEM MANAGEMENT
I.S. EN 13830:2015	CURTAIN WALLING - PRODUCT STANDARD
I.S. EN 14389-2:2015	ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS
I.S. EN 13084-2:2007	FREE-STANDING CHIMNEYS - PART 2: CONCRETE CHIMNEYS
I.S. EN 12368:2015	TRAFFIC CONTROL EQUIPMENT - SIGNAL HEADS
I.S. EN 1993-1-4:2006	EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-4: GENERAL RULES - SUPPLEMENTARY RULES FOR STAINLESS STEELS (INCLUDING IRISH NATIONAL ANNEX)
DIN EN 1996-1-1:2013-02	Eurocode 6: Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures (includes Amendment 1:2012)
I.S. EN 13451-1:2011	SWIMMING POOL EQUIPMENT - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS
EN 15512:2009	Steel static storage systems - Adjustable pallet racking systems - Principles for structural design
DIN EN 1993-1-6:2010-12	EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-6: STRENGTH AND STABILITY OF SHELL STRUCTURES
I.S. EN ISO 19902:2007	PETROLEUM AND NATURAL GAS INDUSTRIES - FIXED STEEL OFFSHORE STRUCTURES
I.S. EN 1994-2:2005	EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 2: GENERAL RULES AND RULES FOR BRIDGES (INCLUDING IRISH NATIONAL ANNEX)
DIN EN 1536:2015-10	EXECUTION OF SPECIAL GEOTECHNICAL WORK - BORED PILES
I.S. EN 1520:2011	PREFABRICATED REINFORCED COMPONENTS OF LIGHTWEIGHT AGGREGATE CONCRETE WITH OPEN STRUCTURE WITH STRUCTURAL OR NON-STRUCTURAL REINFORCEMENT
I.S. EN 13693:2005	PRECAST CONCRETE PRODUCTS - SPECIAL ROOF ELEMENTS
I.S. EN 12812:2008	FALSEWORK - PERFORMANCE REQUIREMENTS AND GENERAL DESIGN
I.S. EN 13782:2015	TEMPORARY STRUCTURES - TENTS - SAFETY
I.S. EN 13224:2011	PRECAST CONCRETE PRODUCTS - RIBBED FLOOR ELEMENTS
I.S. EN 1991-1-3:2003	EUROCODE 1 - ACTIONS ON STRUCTURES - PART 1-3: GENERAL ACTIONS - SNOW LOADS (INCLUDING IRISH NATIONAL ANNEX)
I.S. EN 1993-4-3:2007	EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 4-3: PIPELINES
DIN EN 13084-1:2007-05	Free-standing chimneys - Part 1: General requirements
I.S. EN 1994-1-1:2005	EUROCODE 4: DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS (INCLUDING IRISH NATIONAL ANNEX)
DIN EN 12602:2016-12	Prefabricated reinforced components of autoclaved aerated concrete
I.S. EN 12871:2013	WOOD-BASED PANELS - DETERMINATION OF PERFORMANCE CHARACTERISTICS FOR LOAD BEARING PANELS FOR USE IN FLOORS, ROOFS AND WALLS
I.S. EN 13107:2015	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CIVIL ENGINEERING WORKS
I.S. EN 14250:2010	TIMBER STRUCTURES - PRODUCT REQUIREMENTS FOR PREFABRICATED STRUCTURAL MEMBERS ASSEMBLED WITH PUNCHED METAL PLATE FASTENERS
I.S. EN 40-3-2:2013	LIGHTING COLUMNS - PART 3-2: DESIGN AND VERIFICATION - VERIFICATION BY TESTING
I.S. EN 13084-1:2007	FREE-STANDING CHIMNEYS - PART 1: GENERAL REQUIREMENTS
DIN EN 13121-3:2016-10	GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 3: DESIGN AND WORKMANSHIP
I.S. EN 1536:2010	EXECUTION OF SPECIAL GEOTECHNICAL WORK - BORED PILES
I.S. EN 40-3-1:2013	LIGHTING COLUMNS - PART 3-1: DESIGN AND VERIFICATION - SPECIFICATION FOR CHARACTERISTIC LOADS
EN ISO 19902:2007/A1:2013	PETROLEUM AND NATURAL GAS INDUSTRIES - FIXED STEEL OFFSHORE STRUCTURES (ISO 19902:2007/AMD 1:2013)
I.S. EN 1537:2013	EXECUTION OF SPECIAL GEOTECHNICAL WORKS - GROUND ANCHORS
I.S. EN 12930:2015	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CALCULATIONS
I.S. EN 13001-2:2014	CRANE SAFETY - GENERAL DESIGN - PART 2: LOAD ACTIONS
I.S. EN 1996-1-1:2005	EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 1-1: GENERAL RULES FOR REINFORCED AND UNREINFORCED MASONRY STRUCTURES (INCLUDING IRISH NATIONAL ANNEX)
I.S. EN 1538:2010	EXECUTION OF SPECIAL GEOTECHNICAL WORK - DIAPHRAGM WALLS
DIN EN 13374:2013-07	TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS
I.S. EN 14199:2015	EXECUTION OF SPECIAL GEOTECHNICAL WORKS - MICROPILES
I.S. EN 14389-1:2015	ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS
UNI EN 13693 : 2009	PRECAST CONCRETE PRODUCTS - SPECIAL ROOF ELEMENTS
VDI 4437:2017-07	Pan conveyors for bulk material - Continuous conveyors survey
VDI 2038 Blatt 2:2013-01	Serviceability of structures under dynamic loads - Methods of analysis and evaluation in structural dynamics - Shock and vibration - prognosis, measurement, evaluation and reduction measures
VDI 6012 Blatt 1.4:2016-01	Integration of distributed and renewables-based energy systems in buildings - Fundamentals - Fixing of solar modules and solar collectors on buildings
DIN EN 16927:2017-05	MINI POOLS - SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR MINI POOLS
VDI 2038 Blatt 1:2012-06	Serviceability of structures under dynamic loads - Methods of analysis and evaluation in structural dynamics - Basics, methods, procedures and loads
VDI 6201 Blatt 1:2015-12	Software-based structural analysis - Fundamentals, requirements, modeling
VDI 3813 Blatt 1:2011-05	Building automation and control systems (BACS) - Fundamentals for room control
VDI/BV-BS 6206 Blatt 1:2015-06	Buildings constructed with reusable pre-assembled room units in steel frame construction - Fundamentals
UNI CEN/TS 13001-3-2 : 2008	CRANES - GENERAL DESIGN - PART 3-2: LIMIT STATES AND PROOF OF COMPETENCE OF WIRE ROPES IN REEVING SYSTEMS
DIN EN 1999-1-1:2014-03	EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES
DIN EN 1337-8:2008-01	STRUCTURAL BEARINGS - PART 8: GUIDE BEARINGS AND RESTRAINT BEARINGS
PD CEN/TR 1317-6:2012	Road restraint systems Pedestrian restraint system. Pedestrian parapets
DIN EN 13670:2011-03	Execution of concrete structures
I.S. EN 1991-3:2006	EUROCODE 1 - ACTIONS ON STRUCTURES - PART 3: ACTIONS INDUCED BY CRANES AND MACHINERY
DIN EN 16432-1:2015-04 (Draft)	RAILWAY APPLICATIONS - BALLASTLESS TRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS
11/30253904 DC : 0	BS EN 12871 - WOOD-BASED PANELS - DETERMINATION OF PERFORMANCE CHARACTERISTICS FOR LOAD BEARING PANELS FOR USE IN FLOORS, ROOFS AND WALLS
BS EN 13670:2009	EXECUTION OF CONCRETE STRUCTURES
13/30254279 DC : 0	BS ISO 16488 - MARINE FINFISH FARMS - OPEN NET CAGE - DESIGN AND OPERATION
I.S. EN 1996-3:2006	EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 3: SIMPLIFIED CALCULATION METHODS FOR UNREINFORCED MASONRY STRUCTURES (INCLUDING IRISH NATIONAL ANNEX)
DIN EN 1999-1-5:2010-05	EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-5: SHELL STRUCTURES
PREN 14389-1 : DRAFT 2013	ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS
I.S. EN 1992-3:2006	EUROCODE 2 - DESIGN OF CONCRETE STRUCTURES - PART 3: LIQUID RETAINING AND CONTAINMENT STRUCTURES
12/30265273 DC : DRAFT OCT 2012	BS EN 13001-3-2 - CRANES - GENERAL DESIGN - LIMIT STATES AND PROOF OF COMPETENCE OF WIRE ROPES IN REEVING SYSTEMS
UNI EN 12811-4 : 2014	TEMPORARY WORKS EQUIPMENT - PART 4: PROTECTION FANS FOR SCAFFOLDS - PERFORMANCE REQUIREMENTS AND PRODUCT DESIGN
PREN 1504-10 : DRAFT 2015	PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS
I.S. EN 1996-2:2006	EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 2: DESIGN CONSIDERATIONS, SELECTION OF MATERIALS AND EXECUTION OF MASONRY (INCLUDING IRISH NATIONAL ANNEX)
BS EN 16240:2013	Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings. Requirements and test methods
UNE-EN 1996-1-2:2011	Eurocode 6 - Design of masonry structures - Part 1-2: General rules - Structural fire design
08/30192723 DC : 0	BS EN 1536 - EXECUTION OF SPECIAL GEOTECHNICAL WORK - BORED PILES
I.S. EN 1991-2:2003	EUROCODE 1: ACTIONS ON STRUCTURES - PART 2: TRAFFIC LOADS ON BRIDGES (INCLUDING IRISH NATIONAL ANNEX)
DIN EN 13001-3-2:2015-10	CRANES - GENERAL DESIGN - PART 3-2: LIMIT STATES AND PROOF OF COMPETENCE OF WIRE ROPES IN REEVING SYSTEMS
BS EN 15037-1:2008	PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 1: BEAMS
I.S. EN 1997-1:2005	EUROCODE 7: GEOTECHNICAL DESIGN - PART 1: GENERAL RULES
UNI EN 15037-5 : 2013	PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 5: LIGHTWEIGHT BLOCKS FOR SIMPLE FORMWORK
DIN EN 1090-5 E : 2017	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
BS EN 1999-1-4 : 2007	EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-4: COLD-FORMED STRUCTURAL SHEETING
I.S. EN 15512:2009	STEEL STATIC STORAGE SYSTEMS - ADJUSTABLE PALLET RACKING SYSTEMS - PRINCIPLES FOR STRUCTURAL DESIGN
BS EN 16582-1:2015	Domestic swimming pools General requirements including safety and test methods
13/30275585 DC : 0	BS EN 13107 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CIVIL ENGINEERING WORKS
UNE-EN 15528:2016	Railway applications - Line categories for managing the interface between load limits of vehicles and infrastructure
UNE-EN 50583-2:2016	Photovoltaics in buildings - Part 2: BIPV systems
13/30277107 DC : 0	BS EN 14389-2 - ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS
07/30161334 DC : 0	BS EN 15644 - TRADITIONALLY DESIGNED PREFABRICATED STAIRS MADE OF SOLID WOOD - SPECIFICATIONS AND REQUIREMENTS
16/30340629 DC : 0	BS EN 1794-1 - ROAD TRAFFIC NOISE REDUCING DEVICES - NON ACOUSTIC PERFORMANCE - PART 1: MECHANICAL PERFORMANCE AND STABILITY REQUIREMENTS
13/30286097 DC : 0	BS EN 14358 - TIMBER STRUCTURES - CALCULATION OF CHARACTERISTIC 5-PERCENTILE AND MEAN VALUES FOR THE PURPOSE OF INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL
DIN EN 16481 E : 2014	TIMBER STAIRS - STRUCTURAL DESIGN - CALCULATION METHODS
12/30266506 DC : 0	BS EN 50583 - PHOTOVOLTAICS IN BUILDINGS
PD CEN/TR 15728:2016	DESIGN AND USE OF INSERTS FOR LIFTING AND HANDLING OF PRECAST CONCRETE ELEMENTS
ISO 3898:2013	Bases for design of structures — Names and symbols of physical quantities and generic quantities
I.S. CEN TS 13001-3-2:2005	CRANES - GENERAL DESIGN - PART 3-2: LIMIT STATES AND PROOF OF COMPETENCE OF WIRE ROPES IN REEVING SYSTEMS
BS EN 1337-8:2007	Structural bearings Guide bearings and restraint bearings
UNI EN 13369 : 2013	COMMON RULES FOR PRECAST CONCRETE PRODUCTS
PD ISO/TR 24679-3:2015	Fire safety engineering. Performance of structure in fire Example of an open car park
BS PP1990(2004) : 2004	GUIDE TO THE STRUCTURAL EUROCODES FOR STUDENTS OF STRUCTURAL DESIGN
04/19988815 DC : DRAFT SEP 2004	BS EN 15037-1 - PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 1: BEAMS
UNI CEN/TS 13001-3-1 : 2005	CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES
EN 115-1:2017	Safety of escalators and moving walks - Part 1: Construction and installation
17/30320855 DC : 0	BS EN 62938 ED 1.0 - NON-UNIFORM SNOW LOAD TESTING FOR PHOTOVOLTAIC (PV) MODULES
08/30171944 DC : DRAFT JAN 2008	BS EN 12812 - FALSE WORK - PERFORMANCE REQUIREMENTS AND GENERAL DESIGN
11/30238648 DC : DRAFT FEB 2011	BS EN 16240 - LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
PREN 12930 : DRAFT 2013	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CALCULATIONS
PD CEN/TR 14862:2004	PRECAST CONCRETE PRODUCTS - FULL-SCALE TESTING REQUIREMENTS IN STANDARDS ON PRECAST CONCRETE PRODUCTS
PREN 17121 : DRAFT 2017	CONSERVATION OF CULTURAL HERITAGE - HISTORIC TIMBER STRUCTURES - GUIDELINES FOR THE ON SITE ASSESSMENT
PREN 13495 : DRAFT 2017	THERMAL INSULATION PRODUCTS FOR BUILDING APPLICATIONS - DETERMINATION OF THE PULL-OFF RESISTANCE OF EXTERNAL THERMAL INSULATION COMPOSITE SYSTEMS (ETICS)(FOAM BLOCK TEST)
07/30172380 DC : 0	BS EN 14490 - EXECUTION OF SPECIAL GEOTECHNICAL WORKS - SOIL NAILING
03/314375 DC : DRAFT DEC 2003	BS EN 14844 - PRECAST CONCRETE BOX CULVERTS
UNE-EN ISO 22282-1:2013	Geotechnical investigation and testing - Geohydraulic testing - Part 1: General rules (ISO 22282-1:2012)
UNE-EN 13001-3-2:2015	Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems
DIN EN 16153:2015-05	LIGHT TRANSMITTING FLAT MULTIWALL POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
PREN 1337-1 : DRAFT 2018	STRUCTURAL BEARINGS - PART 1: GENERAL
17/30347025 DC : 0	BS EN 15129 - ANTI-SEISMIC DEVICES
DIN EN 16432-1 E : 2017	RAILWAY APPLICATIONS - BALLASTLESS TRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS
DIN EN 13001-3-1:2013-12	CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE
I.S. EN 115-1:2017	SAFETY OF ESCALATORS AND MOVING WALKS - PART 1: CONSTRUCTION AND INSTALLATION
I.S. EN 13445-3:2014	UNFIRED PRESSURE VESSELS - PART 3: DESIGN
BS EN 13121-3:2016	GRP tanks and vessels for use above ground Design and workmanship
BS PD6705-2(2010) : 2010	STRUCTURAL USE OF STEEL AND ALUMINIUM - PART 2: RECOMMENDATIONS FOR THE EXECUTION OF STEEL BRIDGES TO BS EN 1090-2
I.S. EN 16240:2013	LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
PREN 1794-1 : DRAFT 2016	ROAD TRAFFIC NOISE REDUCING DEVICES - NON-ACOUSTIC PERFORMANCE - PART 1: MECHANICAL PERFORMANCE AND STABILITY REQUIREMENTS
I.S. EN 16582-1:2015	DOMESTIC SWIMMING POOLS - PART 1: GENERAL REQUIREMENTS INCLUDING SAFETY AND TEST METHODS
I.S. EN 1337-8:2007	STRUCTURAL BEARINGS - PART 8: GUIDE BEARINGS AND RESTRAINT BEARINGS
I.S. EN 16481:2014	TIMBER STAIRS - STRUCTURAL DESIGN - CALCULATION METHODS
DIN EN 13369:2013-08	COMMON RULES FOR PRECAST CONCRETE PRODUCTS
PREN 14509 : DRAFT 2013	SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
PREN 12699 : DRAFT 2013	EXECUTION OF SPECIAL GEOTECHNICAL WORK - DISPLACEMENT PILES
DIN EN 1069-1:2015-09 (Draft)	WATER SLIDES - PART 1: SAFETY REQUIREMENTS AND TEST METHODS
I.S. EN 1999-1-4:2007	EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-4: COLD-FORMED STRUCTURAL SHEETING (INCLUDING IRISH NATIONAL ANNEX)
CEI EN 50341-1 : 2013	OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS
UNE-EN 13121-3:2017	GRP tanks and vessels for use above ground - Part 3: Design and workmanship
UNI EN 1999-1-4 : 2011	EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-4: COLD-FORMED STRUCTURAL SHEETING
EN 1090-2:2008+A1:2011	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
PREN 1090-4 : DRAFT 2014	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 4: TECHNICAL REQUIREMENTS FOR THIN-GAUGE, COLD-FORMED STEEL ELEMENTS AND STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
PREN 16759 : DRAFT 2014	STRUCTURAL SEALANT GLAZING SYSTEMS (SSGS)
UNE-EN 16582-1:2015	Domestic swimming pools - Part 1: General requirements including safety and test methods
ISO 16488:2015	Marine finfish farms Open net cage Design and operation
BS EN 1090-2 : 2008	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
DIN EN 1090-2:2015-07 (Draft)	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
EN 16932-1:2018	Drain and sewer systems outside buildings - Pumping systems - Part 1: General requirements
ISO 17842-1:2015	Safety of amusement rides and amusement devices — Part 1: Design and manufacture
I.S. EN 15898:2011	CONSERVATION OF CULTURAL PROPERTY - MAIN GENERAL TERMS AND DEFINITIONS
EN 1993-4-1:2007/A1:2017	EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 4-1: SILOS
I.S. EN 14509:2013	SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
I.S. EN 15644:2009	TRADITIONALLY DESIGNED PREFABRICATED STAIRS MADE OF SOLID WOOD - SPECIFICATIONS AND REQUIREMENTS
EN 1993-1-4:2006/A1:2015	EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-4: GENERAL RULES - SUPPLEMENTARY RULES FOR STAINLESS STEELS
DIN EN 12812:2008-12	FALSEWORK - PERFORMANCE REQUIREMENTS AND GENERAL DESIGN
DIN EN 1993-1-4:2015-10	EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-4: GENERAL RULES - SUPPLEMENTARY RULES FOR STAINLESS STEELS
DIN EN 1996-2:2010-12	Eurocode 6: Design of masonry structures - Part 2: Design considerations, selection of materials and execution of masonry (includes Corrigendum AC:2009)
DIN EN 1996-3:2010-12	Eurocode 6: Design of masonry structures - Part 3: Simplified calculation methods for unreinforced masonry structures (includes Corrigendum AC:2009)
DIN EN 1337-4 E : 2004	STRUCTURAL BEARINGS - PART 4: ROLLER BEARINGS
DIN EN 1997-1:2014-03	EUROCODE 7: GEOTECHNICAL DESIGN - PART 1: GENERAL RULES
DIN EN 14731 E : 2005	EXECUTION OF SPECIAL GEOTECHNICAL WORKS - GROUND TREATMENT BY DEEP VIBRATION
DIN EN 1991-1-2:2010-12	EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-2: GENERAL ACTIONS - ACTIONS ON STRUCTURES EXPOSED TO FIRE
DIN EN 1337-3 E : 2005	STRUCTURAL BEARINGS - PART 3: ELASTOMERIC BEARINGS
DIN EN 1994-2:2010-12	Eurocode 4: Design of composite steel and concrete structures - Part 2: General rules and rules for bridges (includes Corrigendum AC:2008)
DIN EN 13782:2015-06	TEMPORARY STRUCTURE - TENTS - SAFETY
DIN EN 1337-5 E : 2005	STRUCTURAL BEARINGS - PART 5: POT BEARINGS
DIN EN 1991-1-6:2010-12	EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-6: GENERAL ACTIONS, ACTIONS DURING EXECUTION
BS EN 13084-2:2007	Free-standing chimneys Concrete chimneys
UNE-EN 14509:2014	Self-supporting double skin metal faced insulating panels - Factory made products - Specifications
BS EN 14475:2006	Execution of special geotechnical works. Reinforced fill
UNE-EN 14250:2010	Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners
BS EN 1520:2011	Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement
BS EN 1998-6:2005	Eurocode 8. Design of structures for earthquake resistance Towers, masts and chimneys
BS EN 1993-4-3:2007	Eurocode 3. Design of steel structures Pipelines
IEC TR 60865-2:2015	Short-circuit currents - Calculation of effects - Part 2: Examples of calculation
BS EN 40-3-2:2013	Lighting columns Design and verification. Verification by testing
DIN EN 1337-4:2004-08	Structural bearings - Part 4: Roller bearings
UNE-EN 13224:2012	Precast concrete products - Ribbed floor elements
EN 13451-1:2011+A1:2016	Swimming pool equipment - Part 1: General safety requirements and test methods
EN 13200-6:2012	Spectator facilities - Part 6 : Demountable (temporary) stands
EEMUA 207 : 2009	DOUBLE CONCRETE TANKS FOR LIQUEFIED GAS - GUIDE TO DESIGN, CONSTRUCTION AND OPERATION
EN 13830:2015	Curtain walling - Product standard
UNI EN 13200-6 : 2013	SPECTATOR FACILITIES - PART 6: DEMOUNTABLE (TEMPORARY) STANDS
I.S. EN 13200-6:2012	SPECTATOR FACILITIES - PART 6: DEMOUNTABLE (TEMPORARY) STANDS
I.S. EN 1992-1-1:2004	EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
UNE-EN 1991-1-3:2018	Eurocode 1 - Actions on structures - Part 1-3: General actions - Snow loads.
EN 1995-2:2004	Eurocode 5: Design of timber structures - Part 2: Bridges
EN 1993-1-2:2005/AC:2009	EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
EN 1993-5:2007/AC:2009	EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 5: PILING
EN 16240:2013	Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods
EN 1999-1-1:2007/A2:2013	EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES
UNI EN 1991-1-5 : 2004	EUROCODE 1 - ACTIONS ON STRUCTURES - PART 1-5: GENERAL ACTIONS - THERMAL ACTIONS
UNI EN 1991-1-1 : 2004	EUROCODE 1 - ACTIONS ON STRUCTURES - PART 1-1: GENERAL ACTIONS - DENSITIES, SELF-WEIGHT, IMPOSED LOADS FOR BUILDINGS
UNI EN 14991 : 2007	PRECAST CONCRETE PRODUCTS - FOUNDATION ELEMENTS
UNI EN 14509 : 2013	SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
UNI EN 1991-4 : 2006	EUROCODE 1 - ACTIONS ON STRUCTURES - PART 4: SILOS AND TANKS
UNI EN 1537 : 2013	EXECUTION OF SPECIAL GEOTECHNICAL WORKS - GROUND ANCHORS
UNI EN 1993-5 : 2007	EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 5: PILING
UNI EN 13374 : 2013	TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS
UNI EN 1991-1-6 : 2005	EUROCODE 1 - ACTIONS ON STRUCTURES - PART 1-6: GENERAL ACTIONS - ACTIONS DURING EXECUTION
UNI EN 1994-2 : 2006	EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 2: GENERAL RULES AND RULES FOR BRIDGES
UNI EN 1996-2 : 2006	EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 2: DESIGN CONSIDERATIONS, SELECTION OF MATERIALS AND EXECUTION OF MASONRY
UNI EN 1995-1-2 : 2005	EUROCODE 5 - DESIGN OF TIMBER STRUCTURES - PART 1-2: GENERAL - STRUCTURAL FIRE DESIGN
UNI EN 1991-1-4 : 2010	EUROCODE 1 - ACTIONS ON STRUCTURES - PART 1-4: GENERAL ACTIONS - WIND ACTIONS
UNI EN 1993-1-10 : 2005	EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-10: MATERIAL TOUGHNESS AND THROUGH-THICKNESS PROPERTIES
UNI EN 40-3-2 : 2013	LIGHTING COLUMNS - PART 3-2: DESIGN AND VERIFICATION - VERIFICATION BY TESTING
UNI EN 1992-3 : 2006	EUROCODE 2 - DESIGN OF CONCRETE STRUCTURES - PART 3: LIQUID RETAINING AND CONTAINMENT STRUCTURES
UNI EN 13224 : 2012	PRECAST CONCRETE PRODUCTS - RIBBED FLOOR ELEMENTS
UNI EN 1994-1-2 : 2014	EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
UNI EN 1993-4-3 : 2007	EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 4-3: PIPELINES
UNI EN 1520 : 2011	Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non- structural reinforcement
UNI EN 1993-1-2 : 2005	EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
UNI EN 1504-10 : 2005	PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS - REQUIREMENTS - QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS
UNI EN 1992-1-2 : 2005	EUROCODE 2 - DESIGN OF CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
UNI EN 14250 : 2010	TIMBER STRUCTURES - PRODUCT REQUIREMENTS FOR PREFABRICATED STRUCTURAL MEMBERS ASSEMBLED WITH PUNCHED METAL PLATE FASTENERS
UNI EN 12871 : 2013	WOOD-BASED PANELS - DETERMINATION OF PERFORMANCE CHARACTERISTICS FOR LOAD BEARING PANELS FOR USE IN FLOORS, ROOFS AND WALLS
UNI EN 1998-3 : 2005	EUROCODE 8 - DESIGN OF STRUCTURES FOR EARTHQUAKE RESISTANCE - PART 3: ASSESSMENT AND RETROFITTING OF BUILDINGS
UNI EN 1996-1-2 : 2005	EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
UNI EN 1991-2 : 2005	EUROCODE 1 - ACTIONS ON STRUCTURES - PART 2: TRAFFIC LOADS ON BRIDGES
UNI EN 1993-6 : 2007	EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 6: CRANE SUPPORTING STRUCTURES
UNI EN 1997-2 : 2007	EUROCODE 7 - GEOTECHNICAL DESIGN - PART 2: GROUND INVESTIGATION AND TESTING
UNI EN 12843 : 2005	PRECAST CONCRETE PRODUCTS - MASTS AND POLES
UNI EN 12812 : 2008	FALSEWORK - PERFORMANCE REQUIREMENTS AND GENERAL DESIGN
UNI EN 1999-1-2 : 2007	EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-2: STRUCTURAL FIRE DESIGN
EN 15258:2008	Precast concrete products - Retaining wall elements
UNI EN 1991-1-2 : 2004	EUROCODE 1 - ACTIONS ON STRUCTURES - PART 1-2: GENERAL ACTIONS - ACTIONS ON STRUCTURES EXPOSED TO FIRE
UNI EN 1994-1-1 : 2005	EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
UNI EN 1991-3 : 2006	EUROCODE 1 - ACTIONS ON STRUCTURES - PART 3: ACTIONS INDUCED BY CRANES AND MACHINERY
UNI EN 1998-2 : 2011	EUROCODE 8 - DESIGN OF STRUCTURES FOR EARTHQUAKE RESISTANCE - PART 2: BRIDGES
UNI EN 1997-1 : 2013	EUROCODE 7: GEOTECHNICAL DESIGN - PART 1: GENERAL RULES
UNI EN 40-3-1 : 2013	LIGHTING COLUMNS - PART 3-1: DESIGN AND VERIFICATION - SPECIFICATION FOR CHARACTERISTIC LOADS
UNI EN 1995-1-1 : 2014	EUROCODE 5 - DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS
UNI EN 14475 : 2006	EXECUTION OF SPECIAL GEOTECHNICAL WORKS - REINFORCED FILL
UNI EN 1991-1-7 : 2014	EUROCODE 1 - ACTIONS ON STRUCTURES - PART 1-7: GENERAL ACTIONS - ACCIDENTAL ACTIONS
UNI EN 1996-1-1 : 2013	EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 1-1: GENERAL RULES FOR REINFORCED AND UNREINFORCED MASONRY STRUCTURES
BS EN 16481:2014	Timber stairs. Structural design. Calculation methods
I.S. EN 1995-1-1:2005	EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS
I.S. EN 752:2017	DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - SEWER SYSTEM MANAGEMENT
DIN EN 16582-2 E : 2015	DOMESTIC SWIMMING POOLS - PART 2: SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR INGROUND POOLS
I.S. EN 13670:2009	EXECUTION OF CONCRETE STRUCTURES
I.S. EN 1997-2:2007	EUROCODE 7 - GEOTECHNICAL DESIGN - PART 2: GROUND INVESTIGATION AND TESTING
DIN EN 14490:2010-11	Execution of special geotechnical works - Soil nailing
ISO 10639:2017	Plastics piping systems for pressure and non-pressure water supply Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
ISO 10467:2004	Plastics piping systems for pressure and non-pressure drainage and sewerage Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
12/30260570 DC : 0	BS EN 50341-1 - OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS
08/30181655 DC : DRAFT SEP 2008	BS EN 13001-3-1 - CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES
DIN EN 15528 E : 2016	RAILWAY APPLICATIONS - LINE CATEGORIES FOR MANAGING THE INTERFACE BETWEEN LOAD LIMITS OF VEHICLES AND INFRASTRUCTURE
I.S. EN 1998-4:2006	EUROCODE 8 - DESIGN OF STRUCTURES FOR EARTHQUAKE RESISTANCE - PART 4: SILOS, TANKS AND PIPELINES
16/30340644 DC : 0	BS EN 1993-4-1:2007 AMD 1:2016 - EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 4-1: SILOS
PREN 13369 : DRAFT 2017	COMMON RULES FOR PRECAST CONCRETE PRODUCTS
14/30298583 DC : 0	BS EN 13121-3 - GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 3: DESIGN AND WORKMANSHIP
BS EN 15037-5:2013	Precast concrete products. Beam-and-block floor systems Lightweight blocks for simple formwork
I.S. EN 1995-1-2:2005	EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-2: GENERAL - STRUCTURAL FIRE DESIGN (INCLUDING IRISH NATIONAL ANNEX)
12/30259223 DC : 0	BS EN 13200-6 - SPECTATOR FACILITIES - PART 6: DEMOUNTABLE (TEMPORARY) STANDS
PD IEC/TR 60865-2:2015	Short-circuit currents. Calculation of effects Examples of calculation
16/30340647 DC : 0	BS EN 1993-4-2:2007 AMD 1:2016 - EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 4-2: TANKS
11/30250535 DC : DRAFT DEC 2011	BS EN 13374 - TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS
10/30231844 DC : DRAFT SEP 2010	BS EN 13225 - PRECAST CONCRETE PRODUCTS - LINEAR STRUCTURAL ELEMENTS
13/30279620 DC : 0	BS EN 16582-1 - DOMESTIC SWIMMING POOLS - PART 1: GENERAL REQUIREMENTS INCLUDING SAFETY AND TEST METHODS
DIN EN 15258:2009-05	PRECAST CONCRETE PRODUCTS - RETAINING WALL ELEMENTS
DIN EN 1993-4-2:2017-09	EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 4-2: TANKS
17/30341013 DC : DRAFT AUG 2017	BS EN 50119 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES
DIN EN 15528:2016-01	Railway applications - Line categories for managing the interface between load limits of vehicles and infrastructure
DIN EN 15258 E : 2009	PRECAST CONCRETE PRODUCTS - RETAINING WALL ELEMENTS
15/30325882 DC : 0	BS EN 16932-1 - DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - PUMPING SYSTEMS - PART 1: GENERAL REQUIREMENTS
UNI EN ISO 22282-1 : 2012	GEOTECHNICAL INVESTIGATION AND TESTING - GEOHYDRAULIC TESTING - PART 1: GENERAL RULES
I.S. EN 1999-1-5:2007	EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-5: SHELL STRUCTURES (INCLUDING IRISH NATIONAL ANNEX)
DIN EN 16240:2014-03	LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
DIN EN ISO 22282-1:2012-09	Geotechnical investigation and testing - Geohydraulic testing - Part 1: General rules (ISO 22282-1:2012)
BS EN 15258:2008	Precast concrete products. Retaining wall elements
PREN 50583 : DRAFT 2012	PHOTOVOLTAICS IN BUILDINGS
DIN EN 14509 E : 2013	SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
BS EN 13001-3-2:2014	CRANES - GENERAL DESIGN - PART 3-2: LIMIT STATES AND PROOF OF COMPETENCE OF WIRE ROPES IN REEVING SYSTEMS
UNE-EN 14389-1:2015	Road traffic noise reducing devices - Procedures for assessing long term performance - Part 1: Acoustical characteristics
UNE-EN 15037-1:2010	Precast concrete products - Beam-and-block floor systems - Part 1: Beams
BS EN 12811-4:2013	Temporary works equipment Protection fans for scaffolds. Performance requirements and product design
BS EN 15898:2011	Conservation of cultural property. Main general terms and definitions
05/19988811 DC : 0	BS EN 15258 - PRECAST CONCRETE PRODUCTS - RETAINING WALL ELEMENTS
16/30343625 DC : 0	BS ISO 10467 - PLASTICS PIPING SYSTEMS FOR PRESSURE AND NON-PRESSURE DRAINAGE AND SEWERAGE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) SYSTEMS BASED ON UNSATURATED POLYESTER (UP) RESIN
DIN EN 15037-5:2013-08	PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 5: LIGHTWEIGHT BLOCKS FOR SIMPLE FORMWORK
ANEP-77 : 2017	NAVAL SHIP CODE
07/30152878 DC : DRAFT AUG 2007	BS EN 14250 - TIMBER STRUCTURES - PRODUCT REQUIREMENTS FOR PREFABRICATED STRUCTURAL MEMBERS ASSEMBLED WITH PUNCHED METAL PLATE FASTENERS
DIN EN 15512 E : 2010	STEEL STATIC STORAGE SYSTEMS - ADJUSTABLE PALLET RACKING SYSTEMS - PRINCIPLES FOR STRUCTURAL DESIGN
UNE-EN 1992-3:2011	Eurocode 2 - Design of concrete structures - Part 3: Liquid retaining and containment structures
DIN EN 14490 E : 2010	EXECUTION OF SPECIAL GEOTECHNICAL WORKS - SOIL NAILING
DIN EN 1992-1-2:2010-12	Eurocode 2: Design of concrete structures - Part 1-2: General rules - Structural fire design (includes Corrigendum AC:2008)
BS EN 15528:2015	Railway applications. Line categories for managing the interface between load limits of vehicles and infrastructure
BS EN 1993-1-6 : 2007	EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-6: STRENGTH AND STABILITY OF SHELL STRUCTURES
UNE-EN 1995-1-2:2016	Eurocode 5: Design of timber structures - Part 1-2: General - Structural fire design.
ISO 2394:2015	General principles on reliability for structures
S.R. CEN/TR 16886:2016	GUIDANCE ON THE APPLICATION OF STATISTICAL METHODS FOR DETERMINING THE PROPERTIES OF MASONRY PRODUCTS
S.R. CEN/TR 15728:2016	DESIGN AND USE OF INSERTS FOR LIFTING AND HANDLING OF PRECAST CONCRETE ELEMENTS
ISO 12122-6:2017	Timber structures — Determination of characteristic values — Part 6: Large components and assemblies
15/30326160 DC : 0	BS EN 16951-1 - RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTIC CHARACTERISTICS
UNI EN 14490 : 2010	EXECUTION OF SPECIAL GEOTECHNICAL WORKS - SOIL NAILING
I.S. EN 15037-5:2013	PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 5: LIGHTWEIGHT BLOCKS FOR SIMPLE FORMWORK
UNE-EN 1998-2:2012	Eurocode 8 - Design of structures for earthquake resistance - Part 2: Bridges
14/30297831 DC : 0	BS EN 1090-4 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 4: TECHNICAL REQUIREMENTS FOR THIN-GAUGE, COLD-FORMED STEEL ELEMENTS AND STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
UNE-EN 1794-1:2011	Road traffic noise reducing devices - Non-acoustic performance - Part 1: Mechanical performance and stability requirements
17/30357806 DC : 0	BS EN 17121 - CONSERVATION OF CULTURAL HERITAGE - HISTORIC TIMBER STRUCTURES - GUIDELINES FOR THE ON SITE ASSESSMENT
15/30304281 DC : 0