• EN 303 446-2 : 1.1.0 DRAFT

    Current The latest, up-to-date edition.

    ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR COMBINED AND/OR INTEGRATED RADIO AND NON-RADIO EQUIPMENT; PART 2: SPECIFIC CONDITIONS FOR EQUIPMENT INTENDED TO BE USED IN INDUSTRIAL LOCATIONS; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.1(B) OF DIRECTIVE 2014/53/EU

    Available format(s): 

    Language(s): 

    Published date:  27-03-2017

    Publisher:  European Telecommunications Standards Institute

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Intellectual Property Rights
    Foreword
    Modal verbs terminology
    Introduction
    1 Scope
    2 References
    3 Definitions and abbreviations
    4 EMC requirements
    Annex A (informative) - Relationship between the
            present document and the essential
            requirements of Directive 2014/53/EU
    Annex B (informative) - Use of industrial equipment
            in residential locations
    Annex C (informative) - Exclusion bands
    Annex D (informative) - Change History
    History

    Abstract - (Show below) - (Hide below)

    Describes requirements in respect of ElectroMagnetic Compatibility (EMC) under article 3.1(b) of Directive 2014/53/EU for combined and/or integrated equipment intended to be operated within industrial locations.

    General Product Information - (Show below) - (Hide below)

    Comment Closes On
    Committee ERM WGEMC
    Document Type Draft
    Publisher European Telecommunications Standards Institute
    Status Current

    Standards Referenced By This Book - (Show below) - (Hide below)

    TR 103 400 : 1.1.1 ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); IMPACT OF CENELEC EN 55035 ON ETSI EMC STANDARDS

    Standards Referencing This Book - (Show below) - (Hide below)

    EN 301 489-33 : 1.1.1 ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 33: SPECIFIC CONDITIONS FOR ULTRA-WIDEBAND (UWB) DEVICES; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.1(B) OF DIRECTIVE 2014/53/EU
    EN 50270:2015 ELECTROMAGNETIC COMPATIBILITY - ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE GASES, TOXIC GASES OR OXYGEN
    EN 60947-8:2003/A2:2012 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 8: CONTROL UNITS FOR BUILT-IN THERMAL PROTECTION (PTC) FOR ROTATING ELECTRICAL MACHINES (IEC 60947-8:2003/A2:2011)
    EN 50561-1:2013/AC:2015 Power line communication apparatus used in low-voltage installations - Radio disturbance characteristics - Limits and methods of measurement - Part 1: Apparatus for in-home use
    EN 60947-4-3:2014 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-3: CONTACTORS AND MOTOR-STARTERS - AC SEMICONDUCTOR CONTROLLERS AND CONTACTORS FOR NON-MOTOR LOADS (IEC 60947-4-3:2014)
    EN 62135-2:2015 RESISTANCE WELDING EQUIPMENT - PART 2: ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS (IEC 62135-2:2015)
    EN 61000-6-3:2007/A1:2011/AC:2012 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-3: GENERIC STANDARDS - EMISSION STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS (IEC 61000-6-3:2006/A1:2010)
    EN 301 489-51 : 1.1.1 ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 51: SPECIFIC CONDITIONS FOR AUTOMOTIVE, GROUND BASED VEHICLES AND SURVEILLANCE RADAR DEVICES USING 24,05 GHZ TO 24,25 GHZ, 24,05 GHZ TO 24,5 GHZ, 76 GHZ TO 77 GHZ AND 77 GHZ TO 81 GHZ; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.1B OF DIRECTIVE 2014/53/EU
    EN 61131-2:2007 PROGRAMMABLE CONTROLLERS - PART 2: EQUIPMENT REQUIREMENTS AND TESTS
    EN 61557-12 : 2008 ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 12: PERFORMANCE MEASURING AND MONITORING DEVICES (PMD)
    EG 203 367 : 1.1.1 GUIDE TO THE APPLICATION OF HARMONISED STANDARDS COVERING ARTICLES 3.1B AND 3.2 OF THE DIRECTIVE 2014/53/EU (RED) TO MULTI-RADIO AND COMBINED RADIO AND NON-RADIO EQUIPMENT
    EN 50370-2:2003 Electromagnetic compatibility (EMC) - Product family standard for machine tools - Part 2: Immunity
    EN 61326-2-3:2013 ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS -PART 2-3: PARTICULAR REQUIREMENTS - TEST CONFIGURATION, OPERATIONAL CONDITIONS AND PERFORMANCE CRITERIA FOR TRANSDUCERS WITH INTEGRATED OR REMOTE SIGNAL CONDITIONING (IEC 61326-2-3:2012)
    EN 60947-1:2007/A2:2014 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES (IEC 60947-1:2007/A2:2014)
    EN 60947-5-7 : 2003 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-7: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - REQUIREMENTS FOR PROXIMITY DEVICES WITH ANALOGUE OUTPUT
    EN 301 489-3 : 1.6.1 ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 3: SPECIFIC CONDITIONS FOR SHORT-RANGE DEVICES (SRD) OPERATING ON FREQUENCIES BETWEEN 9 KHZ AND 246 GHZ
    EN 60947-5-2:2007/A1:2012 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-2: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - PROXIMITY SWITCHES (IEC 60947-5-2:2007/A1:2012)
    EN 60947-3:2009/A2:2015 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 3: SWITCHES, DISCONNECTORS, SWITCH-DISCONNECTORS AND FUSE-COMBINATION UNITS (IEC 60947-3:2008/A2:2015)
    EN 61326-1:2013 ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 1: GENERAL REQUIREMENTS (IEC 61326-1:2012)
    EN 60947-5-6 : 2000 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-6: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS DC INTERFACE FOR PROXIMITY SENSORS AND SWITCHING AMPLIFIERS (NAMUR)
    EN 61439-2 : 2011 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 2: POWER SWITCHGEAR AND CONTROLGEAR ASSEMBLIES (IEC 61439-2:2011)
    EN 60947-4-1 : 2010 AMD 1 2012 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS (IEC 60947-4-1:2009/A1:2012)
    EN 61000-6-2:2005/corrigendum:2005 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS (IEC 61000-6-2:2005)
    EN 61326-2-5 : 2013 ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 2-5: PARTICULAR REQUIREMENTS - TEST CONFIGURATIONS, OPERATIONAL CONDITIONS AND PERFORMANCE CRITERIA FOR DEVICES WITH FIELD BUS INTERFACES ACCORDING TO IEC 61784-1 (IEC 61326-2-5:2012)
    EN 55011:2016/A1:2017 INDUSTRIAL, SCIENTIFIC AND MEDICAL EQUIPMENT - RADIO-FREQUENCY DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT (CISPR 11:2015/A1:2016)
    EN 61000-6-4:2007/A1:2011 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS
    EN 301 489-52 : 1.1.0 DRAFT ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 52: SPECIFIC CONDITIONS FOR CELLULAR COMMUNICATION MOBILE AND PORTABLE (UE) RADIO AND ANCILLARY EQUIPMENT; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.1B OF DIRECTIVE 2014/53/EU
    2014/53/EU : 2014 COR 1 2015 DIRECTIVE 2014/53/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 16 APRIL 2014 ON THE HARMONISATION OF THE LAWS OF THE MEMBER STATES RELATING TO THE MAKING AVAILABLE ON THE MARKET OF RADIO EQUIPMENT AND REPEALING DIRECTIVE 1999/5/EC TEXT WITH EEA RELEVANCE
    EN 301 489-17 : 2.2.1 ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 17: SPECIFIC CONDITIONS FOR BROADBAND DATA TRANSMISSION SYSTEMS; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.1(B) OF DIRECTIVE 2014/53/EU
    EN 61204-3 : 2000 LOW VOLTAGE POWER SUPPLIES, D.C. OUTPUT - PART 3 ELECTROMAGNETIC (IEC 61204-3:2000)
    EN 301 489-6 : 1.4.1 ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 6: SPECIFIC CONDITIONS FOR DIGITAL ENHANCED CORDLESS TELECOMMUNICATIONS (DECT) EQUIPMENT; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.1(B) OF THE DIRECTIVE 2014/53/EU
    EN 61800-3 : 2004 AMD 1 2012 ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS (IEC 61800-3:2004/A1:2011)
    EN 60947-6-1:2005/A1:2014 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 6-1: MULTIPLE FUNCTION EQUIPMENT - TRANSFER SWITCHING EQUIPMENT (IEC 60947-6-1:2005/A1:2013)
    EN 60947-2:2017 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 2: CIRCUIT-BREAKERS (IEC 60947-2:2016 + COR1:2016)
    EN 60974-10:2014/A1:2015 ARC WELDING EQUIPMENT - PART 10: ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS (IEC 60974-10:2014/A1:2015)
    EN 50370-1 : 2005 Electromagnetic compatibility (EMC) - Product family standard for machine tools - Part 1: Emission
    EN 50561-3 : 2016 POWER LINE COMMUNICATION APPARATUS USED IN LOW-VOLTAGE INSTALLATIONS - RADIO DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT - PART 3: APPARATUS OPERATING ABOVE 30 MHZ
    EN 60947-4-2:2012 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-2: CONTACTORS AND MOTOR-STARTERS - AC SEMICONDUCTOR MOTOR CONTROLLERS AND STARTERS (IEC 60947-4-2:2011)
    EN 61326-2-4 : 2013 ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 2-4: PARTICULAR REQUIREMENTS - TEST CONFIGURATIONS, OPERATIONAL CONDITIONS AND PERFORMANCE CRITERIA FOR INSULATION MONITORING DEVICES ACCORDING TO IEC 61557-8 AND FOR EQUIPMENT FOR INSULATION FAULT LOCATION ACCORDING TO IEC 61557-9 (IEC 61326-2-4:2012)
    EN 303 446-1 : 1.1.0 DRAFT ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR COMBINED AND/OR INTEGRATED RADIO AND NON-RADIO EQUIPMENT; PART 1: REQUIREMENTS FOR EQUIPMENT INTENDED TO BE USED IN RESIDENTIAL, COMMERCIAL AND LIGHT INDUSTRY LOCATIONS; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.1(B) OF DIRECTIVE 2014/53/EU
    EN 61326-2-2:2013 ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 2-2: PARTICULAR REQUIREMENTS - TEST CONFIGURATIONS, OPERATIONAL CONDITIONS AND PERFORMANCE CRITERIA FOR PORTABLE TEST, MEASURING AND MONITORING EQUIPMENT USED IN LOW-VOLTAGE DISTRIBUTION SYSTEMS (IEC 61326-2-2:2012)
    EN 60947-5-9 : 2007 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-9: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - FLOW RATE SWITCHES
    EN 301 489-1 : 2.1.1 ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 1: COMMON TECHNICAL REQUIREMENTS; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.1(B) OF DIRECTIVE 2014/53/EU AND THE ESSENTIAL REQUIREMENTS OF ARTICLE 6 OF DIRECTIVE 2014/30/EU
    EN 60947-6-2:2003/A1:2007 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 6-2: MULTIPLE FUNCTION EQUIPMENT - CONTROL AND PROTECTIVE SWITCHING DEVICES (OR EQUIPMENT) (CPS)
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective