• EN 3475-603:2011/AC:2011

    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

    AEROSPACE SERIES - CABLES, ELECTRICAL, AIRCRAFT USE - TEST METHODS - PART 603: RESISTANCE TO WET ARC TRACKING

    Available format(s): 

    Superseded date:  21-09-2021

    Language(s): 

    Published date:  12-01-2013

    Publisher:  Comite Europeen de Normalisation

    Pure ENs are not available for sale, please purchase a suitable national adoption

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    1 Scope
    2 Normative references
    3 Specimen requirements
    4 Preparation of specimen
    5 Apparatus
    6 Method
    7 Requirements

    Abstract - (Show below) - (Hide below)

    Describes a method of assessing the behaviour of cable insulation subject to an electric arc initiated and maintained by contaminating fluid along the surface of the insulation.

    General Product Information - (Show below) - (Hide below)

    Development Note To be used in conjunction with EN 3475-100. (11/2002)
    Document Type Standard
    Publisher Comite Europeen de Normalisation
    Status Superseded
    Superseded By

    Standards Referenced By This Book - (Show below) - (Hide below)

    09/30204366 DC : 0 BS EN 4604-009 - AEROSPACE SERIES - CABLE, ELECTRICAL, FOR SIGNAL TRANSMISSION - PART 009: CABLE, COAXIAL, LIGHT WEIGHT, 50 OHMS, 180 DEGREE C, TYPE KW (LIGHT WN) - PRODUCT STANDARD
    BS EN 4611-009:2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 009: BJ - NICKEL PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - SINGLE EXTRUDED WALL FOR USE AS CABLE CORES OR WITHIN EQUIPMENT IN AREAS OF HIGH VIBRATION, CABLE FLEXING AND FLUID CONTAMINATION - UV LASER PRINTABLE - PRODUCT STANDARD
    BS EN 4611-007:2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 007: NICKEL PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD
    UNI EN 4608-005 : 2012 AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - SINGLE AND TWISTED MULTICORE ASSEMBLY, SCREENED (BRAIDED) AND JACKETED - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 260 DEGREES C - PART 005: DW FAMILY - LIGHTWEIGHT TWO-CORE GAUGE 24 FOR DATA TRANSMISSION - UV LASER PRINTABLE - PRODUCT STANDARD
    12/30273364 DC : 0 BS EN 2713-012 - AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 200 DEGREES C - PART 012: SILVER PLATED COPPER SCREENED (SPIRAL) AND JACKETED, UV LASER PRINTABLE - PRODUCT STANDARD
    09/30202414 DC : 0 BS EN 4682-003 - AEROSPACE SERIES - CABLES, ELECTRIC, SCREENED AND JACKETED, GENERAL PURPOSE, WITH CONDUCTORS IN ALUMINIUM OR COPPER-CLAD ALUMINIUM - PART 003: AD FAMILY, SCREENED (SPIRAL) AND JACKETED, UV LASER PRINTABLE - PRODUCT STANDARD
    UNE-EN 60695-1-20:2016 Fire hazard testing - Part 1-20: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - General guidance
    BS EN 2714-009:2007 AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 009: SCREENED (SPIRAL) AND JACKETED, YAG X3 LASER PRINTABLE - PRODUCT STANDARD
    PREN 4682-001 : DRAFT 2009 AEROSPACE SERIES - CABLES, ELECTRIC, SCREENED AND JACKETED, GENERAL PURPOSE, WITH CONDUCTORS IN ALUMINIUM OR COPPER-CLAD ALUMINIUM - PART 001: TECHNICAL SPECIFICATION
    PREN 2267-012 : DRAFT 2014 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 260 DEGREES C - PART 012: DZ FAMILY, SINGLE UV LASER PRINTABLE FOR USE IN LOW PRESSURE ATMOSPHERE - PRODUCT STANDARD
    PREN 4682-003 : DRAFT 2009 AEROSPACE SERIES - CABLES, ELECTRIC, SCREENED AND JACKETED, GENERAL PURPOSE, WITH CONDUCTORS IN ALUMINIUM OR COPPER-CLAD ALUMINIUM - PART 003: AD FAMILY, SCREENED (SPIRAL) AND JACKETED, UV LASER PRINTABLE - PRODUCT STANDARD
    BS EN 4604-003:2009 (published 2009-03) Aerospace series. Cable, electrical, for signal transmission Cable, coaxial, 50 ohm, 200 C, type WZ. Product standard
    PREN 3375-003 : 200P1 AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 003: SINGLE BRAID - 77 OHMS - TYPE KG - PRODUCT STANDARD
    PREN 3375-009 : 200P2 AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 009: SINGLE BRAID - CAN BUS - 120 OHMS - TYPE WX - PRODUCT STANDARD
    PREN 2714-014 : 200P3 AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 014: DR FAMILY, 4 TO 11 CORES, TAPED, SCREENED (BRAIDED) AND JACKETED, UV LASER PRINTABLE - PRODUCT STANDARD
    PREN 4604-003 : 200P2 AEROSPACE SERIES - CABLE, ELECTRICAL, FOR SIGNAL TRANSMISSION - PART 003: COAXIAL CABLE 50 OHM, 200 DEGREES C, TYPE WZ - PRODUCT STANDARD
    I.S. EN 4611-004:2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 004: TIN PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 135 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD
    I.S. EN 4608-003:2012 AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - SINGLE AND TWISTED MULTICORE ASSEMBLY, SCREENED (BRAIDED) AND JACKETED - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 260 DEGREES C - PART 003: DN FAMILY - LIGHTWEIGHT - UV LASER PRINTABLE - PRODUCT STANDARD
    PREN 2854-003 : 200P2 AEROSPACE SERIES - CABLES, ELECTRICAL FOR GENERAL PURPOSE - CROSS SECTIONS EQUAL TO AND GREATER THAN 9 MM[2] - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 003: PRODUCT STANDARD
    BS EN 4604-006:2009 (published 2009-03) Aerospace series. Cable, electrical, for signal transmission Cable, coaxial, 50 ohm, 200 C, type WM. Product standard
    BS EN 4604-007:2007 AEROSPACE SERIES - CABLE, ELECTRICAL, FOR SIGNAL TRANSMISSION - PART 007: CABLE, COAXIAL 50 OHMS, 200 DEGREES C, TYPE WN - PRODUCT STANDARD
    I.S. EN 4604-007:2007 AEROSPACE SERIES - CABLE, ELECTRICAL, FOR SIGNAL TRANSMISSION - PART 007: CABLE, COAXIAL 50 OHMS, 200 DEGREE C, TYPE WN - PRODUCT STANDARD
    BS EN 3375-001:2007 AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - TECHNICAL SPECIFICATION
    NF EN 4604-006 : 2009 AEROSPACE SERIES - CABLE, ELECTRICAL, FOR SIGNAL TRANSMISSION - PART 006: CABLE, COAXIAL, 50 OHM, 200 DEGREES C, TYPE WM - PRODUCT STANDARD
    NF EN 4608-001 : 2006 AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - SINGLE AND TWISTED MULTICORE ASSEMBLY, SCREENED (BRAIDED) AND JACKETED - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 260 DEGREES C - PART 001: TECHNICAL SPECIFICATION
    BS EN 4608-001:2006 AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - SINGLE AND TWISTED MULTICORE ASSEMBLY, SCREENED (BRAIDED) AND JACKETED - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 260 DEGREES C - PART 001: TECHNICAL SPECIFICATION
    BS EN 3375-005:2007 AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 005: DOUBLE BRAID + METALLIC LAYER - 77 OHMS - TYPE WV - PRODUCT STANDARD
    BS EN 3375-006:2006 AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 006: SINGLE BRAID - 78 OHMS - TYPE XM - PRODUCT STANDARD
    11/30242754 DC : 0 BS EN 2267-009 - AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREE C AND 260 DEGREE C - PART 009: DRA FAMILY, SINGLE AND MULTICORE ASSEMBLY - PRODUCT STANDARD
    I.S. EN 4604-003:2009 AEROSPACE SERIES - CABLE, ELECTRICAL, FOR SIGNAL TRANSMISSION - PART 003: CABLE, COAXIAL, 50 OHM, 200 DEGREES C, TYPE WZ - PRODUCT STANDARD
    09/30209902 DC : 0 BS EN 2267-011 - AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 260 DEGREES C - PART 011: XXA FAMILY, SINGLE AND MULTICORE ASSEMBLY FOR USE IN LOW PRESSURE ATMOSPHERE - PRODUCT STANDARD
    BS EN 4611-006:2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 006: SILVER PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD
    10/30228109 DC : 0 BS EN 4608-004 - AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - SINGLE AND TWISTED MULTICORE ASSEMBLY, SCREENED (BRAIDED) AND JACKETED - OPERATING TEMPERATURES BETWEEN - 65 DEGREE C AND 260 DEGREE C PART 004: DW FAMILY - LIGHTWEIGHT - UV LASER PRINTABLE - PRODUCT STANDARD
    14/30314191 DC : 0 BS EN 3375-009 - AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 009: SINGLE BRAID - CAN BUS - 120 OHMS - TYPE WX - PRODUCT STANDARD
    BS EN 2854-003:2009 (published 2009-03) Aerospace series. Cables, electrical for general purpose. Cross sections equal to and greater than 9 mm2. Operating temperatures between -55 C and 260 C Product standard
    11/30242768 DC : 0 BS EN 2267-010 - AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREE C AND 260 DEGREE C - PART 010: DR FAMILY, SINGLE UV LASER PRINTABLE - PRODUCT STANDARD
    BS EN 4611-008 : 2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 008: BP - NICKEL PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS WITH ADDITIONAL PROTECTION IN AREAS OF HIGH VIBRATION, CABLE FLEXING AND FLUID CONTAMINATION - UV LASER PRINTABLE - PRODUCT STANDARD
    I.S. EN 4604-008:2009 AEROSPACE SERIES - CABLE, ELECTRICAL, FOR SIGNAL TRANSMISSION - PART 008: CABLE, COAXIAL, 50 OHMS, 200 DEGREES C, TYPE WD - PRODUCT STANDARD
    PREN 4612-013 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - JACKETED OR SCREENED AND JACKETED - PART 013: SX, TC AND UC - NICKEL PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - SINGLE EXTRUDED WALL FOR EQUIPMENT ONLY, WITH JACKET AND SCREEN (SPIRAL) - UV LASER PRINTABLE - PRODUCT STANDARD
    NF EN 4604-003 : 2009 AEROSPACE SERIES - CABLE, ELECTRICAL, FOR SIGNAL TRANSMISSION - PART 003: CABLE, COAXIAL, 50 OHMS, 200 DEGREES C, TYPE WZ - PRODUCT STANDARD
    PREN 4641-102 : 200P1 AEROSPACE SERIES - CABLES, OPTICAL 125 [MU]M DIAMETER CLADDING - PART 102: SEMI-LOOSE 62,5/125 [MU]M GI FIBRE NOMINAL 1,8 MM OUTSIDE DIAMETER - PRODUCT STANDARD
    I.S. EN 4608-005:2012 AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - SINGLE AND TWISTED MULTICORE ASSEMBLY, SCREENED (BRAIDED) AND JACKETED - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 260 DEGREES C - PART 005: DW FAMILY - LIGHTWEIGHT TWO-CORE GAUGE 24 FOR DATA TRANSMISSION - UV LASER PRINTABLE - PRODUCT STANDARD
    I.S. EN 2854-003:2009 AEROSPACE SERIES - CABLES, ELECTRICAL FOR GENERAL PURPOSE - CROSS SECTIONS EQUAL TO AND GREATER THAN 9 MM[2] - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 003: PRODUCT STANDARD
    BS EN 4681-006:2015 AEROSPACE SERIES - CABLES, ELECTRIC, GENERAL PURPOSE, WITH CONDUCTORS IN ALUMINIUM OR COPPER-CLAD ALUMINIUM - PART 006: AZA FAMILY, SINGLE AND MULTICORE ASSEMBLY, FOR USE IN LOW PRESSURE ATMOSPHERE - PRODUCT STANDARD
    UNI EN 4611-003 : 2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 003: TIN PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 135 DEGREES C - SINGLE EXTRUDED WALL FOR ENCLOSED APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD
    EN 4611-005 : 2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 005: SILVER PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - SINGLE EXTRUDED WALL FOR ENCLOSED APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD
    IEC TS 60695-1-20:2008 Fire hazard testing - Part 1-20: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - General guidance
    09/30202412 DC : 0 BS EN 4682-001 - AEROSPACE SERIES - CABLES, ELECTRIC, SCREENED AND JACKETED, GENERAL PURPOSE, WITH CONDUCTORS IN ALUMINIUM OR COPPER-CLAD ALUMINIUM - PART 001: TECHNICAL SPECIFICATION
    NF EN 3375-008 : 2009 AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 008: SINGLE BRAID - STAR QUAD 100 OHMS - TYPE KD - PRODUCT STANDARD
    14/30287765 DC : 0 BS EN 60695-1-20/ED 1.0 - FIRE HAZARD TESTING - PART 1-20: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - IGNITABILITY - GENERAL GUIDANCE
    BS EN 60695-1-20:2016 Fire hazard testing Guidance for assessing the fire hazard of electrotechnical products. Ignitability. General guidance
    09/30209903 DC : 0 BS EN 2714-015 - AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -65 DEGREE C AND 260 DEGREE C - PART 015: XX FAMILY, SCREENED (SPIRAL) AND JACKETED, UV LASER PRINTABLE FOR USE IN LOW PRESSURE ATMOSPHERE - PRODUCT STANDARD
    BS EN 4608-003 : 2012 AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - SINGLE AND TWISTED MULTICORE ASSEMBLY, SCREENED (BRAIDED) AND JACKETED - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 260 DEGREES C - PART 003: DN FAMILY - LIGHTWEIGHT - UV LASER PRINTABLE - PRODUCT STANDARD
    09/30204372 DC : 0 BS EN 4604-010 - AEROSPACE SERIES - CABLE, ELECTRICAL, FOR SIGNAL TRANSMISSION - PART 010: CABLE, COAXIAL, LIGHT WEIGHT, 50 OHMS, 200 DEGREE C, TYPE KX (LIGHT WD) - PRODUCT STANDARD
    PREN 4681-004 : DRAFT 2009 AEROSPACE SERIES - CABLES, ELECTRIC, GENERAL PURPOSE, WITH CONDUCTORS IN ALUMINIUM OR COPPER-CLAD ALUMINIUM - PART 004: ADA FAMILY, SINGLE AND MULTICORE ASSEMBLY - PRODUCT STANDARD
    I.S. EN 4611-009:2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 009: BJ - NICKEL PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - SINGLE EXTRUDED WALL FOR USE AS CABLE CORES OR WITHIN EQUIPMENT IN AREAS OF HIGH VIBRATION, CABLE FLEXING AND FLUID CONTAMINATION - UV LASER PRINTABLE - PRODUCT STANDARD
    I.S. EN 4611-008:2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 008: BP - NICKEL PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS WITH ADDITIONAL PROTECTION IN AREAS OF HIGH VIBRATION, CABLE FLEXING AND FLUID CONTAMINATION - UV LASER PRINTABLE - PRODUCT STANDARD
    I.S. EN 4611-005:2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 005: SILVER PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - SINGLE EXTRUDED WALL FOR ENCLOSED APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD
    I.S. EN 4611-006:2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 006: SILVER PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD
    I.S. EN 4611-007:2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 007: NICKEL PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD
    I.S. EN 4608-001:2006 AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - SINGLE AND TWISTED MULTICORE ASSEMBLY, SCREENED (BRAIDED) AND JACKETED - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 260 DEGREES C - PART 001: TECHNICAL SPECIFICATION
    CEI 89-29 : 2010 FIRE HAZARD TESTING - PART 1-20: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - IGNITABILITY - GENERAL GUIDANCE
    UNI EN 4611-005 : 2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 005: SILVER PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES AND 150 DEGREES - SINGLE EXTRUDED WALL FOR ENCLOSED APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD
    UNI EN 4611-007 : 2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 007: NICKEL PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD
    IEC 60695-1-20:2016 Fire hazard testing - Part 1-20: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - General guidance
    BS EN 3375-003:2007 AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 003: SINGLE BRAID - 77 OHMS - TYPE KG - PRODUCT STANDARD
    EN 4611-003 : 2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 003: TIN PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 135 DEGREES C - SINGLE EXTRUDED WALL FOR ENCLOSED APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD
    EN 4611-004 : 2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 004: TIN PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 135 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD
    EN 4604-003 : 2009 AEROSPACE SERIES - CABLE, ELECTRICAL, FOR SIGNAL TRANSMISSION - PART 003: CABLE, COAXIAL, 50 OHM, 200 DEGREES C, TYPE WZ - PRODUCT STANDARD
    EN 2714-010 : 2006 AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 010: SCREENED (BRAIDED) AND JACKETED, YAG X3 LASER PRINTABLE - PRODUCT STANDARD
    EN 2266-003 : 2005 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREE C AND 200 DEGREE C - PART 003: INK JET PRINTABLE - PRODUCT STANDARD
    EN 4611-009 : 2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 009: BJ - NICKEL PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - SINGLE EXTRUDED WALL FOR USE AS CABLE CORES OR WITHIN EQUIPMENT IN AREAS OF HIGH VIBRATION, CABLE FLEXING AND FLUID CONTAMINATION - UV LASER PRINTABLE - PRODUCT STANDARD
    BS EN 4604-008:2009 (published 2009-09) Aerospace series. Cable, electrical, for signal transmission Cable, coaxial, 50 ohms, 200 C., Type WD. Product standard
    NF EN 2714-009 : A2009 AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 009: SCREENED (SPIRAL) AND JACKETED, YAG X3 LASER PRINTABLE - PRODUCT STANDARD
    14/30300813 DC : 0 BS EN 4681-001 - AEROSPACE SERIES CABLES, ELECTRIC, GENERAL PURPOSE, WITH CONDUCTORS IN ALUMINIUM OR COPPER-CLAD ALUMINIUM - PART 001: TECHNICAL SPECIFICATION
    09/30202402 DC : 0 BS EN 4681-003 - AEROSPACE SERIES - CABLES, ELECTRIC, GENERAL PURPOSE, WITH CONDUCTORS IN ALUMINIUM OR COPPER-CLAD ALUMINIUM - PART 003: AD FAMILY, SINGLE, UV LASER PRINTABLE - PRODUCT STANDARD
    UNI EN 4611-009 : 2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 009: BJ - NICKEL PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - SINGLE EXTRUDED WALL FOR USE AS CABLE CORES OR WITHIN EQUIPMENT IN AREAS OF HIGH VIBRATION, CABLE FLEXING AND FLUID CONTAMINATION - UV LASER PRINTABLE - PRODUCT STANDARD
    09/30202409 DC : 0 BS EN 4681-001 - AEROSPACE SERIES - CABLES, ELECTRIC, GENERAL PURPOSE, WITH CONDUCTORS IN ALUMINIUM OR COPPER-CLAD ALUMINIUM - PART 001: TECHNICAL SPECIFICATION
    BS EN 4611-003:2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 003: TIN PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 135 DEGREES C - SINGLE EXTRUDED WALL FOR ENCLOSED APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD
    14/30314178 DC : 0 BS EN 2714-014 - AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 014: DR FAMILY, 4 TO 11 CORES, TAPED, SCREENED (BRAIDED) AND JACKETED, UV LASER PRINTABLE - PRODUCT STANDARD
    09/30209901 DC : 0 BS EN 2267-012 - AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 260 DEGREES C - PART 012: XX FAMILY, SINGLE UV LASER PRINTABLE FOR USE IN LOW PRESSURE ATMOSPHERE - PRODUCT STANDARD
    PREN 2267-011 : DRAFT 2014 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 260 DEGREES C - PART 011: DZA FAMILY, SINGLE AND MULTICORE ASSEMBLY FOR USE IN LOW PRESSURE ATMOSPHERE - PRODUCT STANDARD
    PREN 2266-008 : DRAFT 2014 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 200 DEGREES C - PART 008: DRP (PAIR) DRT (3 CORES) DRQ (4 CORES) FAMILY, MULTICORE UV LASER PRINTABLE JACKETED CABLE - PRODUCT STANDARD
    NF EN 2854-003 : 2009 AEROSPACE SERIES - CABLES, ELECTRICAL FOR GENERAL PURPOSE - CROSS SECTIONS EQUAL TO AND GREATER THAN 9 MM[2] - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 003: PRODUCT STANDARD
    I.S. EN 4604-006:2009 AEROSPACE SERIES - CABLE, ELECTRICAL, FOR SIGNAL TRANSMISSION - PART 006: CABLE, COAXIAL, 50 OHM, 200 DEGREES C, TYPE WM - PRODUCT STANDARD
    PREN 3375-008 : 200P1 AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 008: SINGLE BRAID - STAR QUAD 100 OHMS - TYPE KD - PRODUCT STANDARD
    PREN 3375-005 : 200P1 AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 005: DOUBLE BRAID + METALLIC LAYER - 77 OHMS - TYPE WV - PRODUCT STANDARD
    PREN 4604-008 : DRAFT 2008 AEROSPACE SERIES - CABLE, ELECTRICAL, FOR SIGNAL TRANSMISSION - PART 008: CABLE, COAXIAL, 50 OHMS, 200 DEGREES C, TYPE WD - PRODUCT STANDARD
    PREN 4681-003 : DRAFT 2009 AEROSPACE SERIES - CABLES, ELECTRIC, GENERAL PURPOSE, WITH CONDUCTORS IN ALUMINIUM OR COPPER-CLAD ALUMINIUM - PART 003: AD FAMILY, SINGLE, UV LASER PRINTABLE - PRODUCT STANDARD
    PREN 3375-007 : 200P2 AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 007: DOUBLE BRAID - 77 OHMS - TYPE WW - PRODUCT STANDARD
    I.S. EN 4681-006:2015 AEROSPACE SERIES - CABLES, ELECTRIC, GENERAL PURPOSE, WITH CONDUCTORS IN ALUMINIUM OR COPPER-CLAD ALUMINIUM - PART 006: AZA FAMILY, SINGLE AND MULTICORE ASSEMBLY, FOR USE IN LOW PRESSURE ATMOSPHERE - PRODUCT STANDARD
    I.S. EN 4611-003:2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 003: TIN PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 135 DEGREES C - SINGLE EXTRUDED WALL FOR ENCLOSED APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD
    I.S. EN 60695-1-20:2016 FIRE HAZARD TESTING - PART 1-20: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - IGNITABILITY - GENERAL GUIDANCE
    I.S. EN 2714-009:2007 AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 009: SCREENED (SPIRAL) AND JACKETED, YAG X3 LASER PRINTABLE - PRODUCT STANDARD
    EN 3375-001:2007 AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 001: TECHNICAL SPECIFICATION
    EN 4604-001:2009 AEROSPACE SERIES - CABLE, ELECTRICAL, FOR SIGNAL TRANSMISSION - PART 001: TECHNICAL SPECIFICATION
    EN 4611-007 : 2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 007: NICKEL PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD
    BS EN 2714-010:2006 AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 010: SCREENED (BRAIDED) AND JACKETED, YAG X3 LASER PRINTABLE - PRODUCT STANDARD
    BS EN 2714-008:2006 AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 008: SCREENED (BRAIDED) AND JACKETED, UV LASER PRINTABLE - PRODUCT STANDARD
    BS EN 2266-003:2005 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREE C AND 200 DEGREE C - PART 003: INK JET PRINTABLE - PRODUCT STANDARD
    BS EN 2346-003:2006 AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 260 DEGREES C - PART 003: DL FAMILY, SINGLE CORE - PRODUCT STANDARD
    BS EN 2346-004:2006 AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 260 DEGREES C - PART 004: DN FAMILY, SINGLE UV LASER PRINTABLE AND MULTICORE ASSEMBLY - LIGHT WEIGHT - PRODUCT STANDARD
    EN 4604-006:2009 AEROSPACE SERIES - CABLE, ELECTRICAL, FOR SIGNAL TRANSMISSION - PART 006: CABLE, COAXIAL, 50 OHM, 200 DEGREES C, TYPE WM - PRODUCT STANDARD
    BS EN 3375-004 : 2007 AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 004: DOUBLE BRAID - 77 OHMS - TYPE WJ - PRODUCT STANDARD
    BS EN 2267-005:2006 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C PART 005: UV LASER PRINTABLE - PRODUCT STANDARD
    EN 2346-004 : 2006 AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 260 DEGREES C - PART 004: DN FAMILY, SINGLE UV LASER PRINTABLE AND MULTICORE ASSEMBLY - LIGHT WEIGHT - PRODUCT STANDARD
    EN 2713-004 : 2006 AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 200 DEGREES C - PART 004: SCREENED (BRAIDED) AND JACKETED, INK JET PRINTABLE - PRODUCT STANDARD
    EN 3375-008 : 2009 AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 008: SINGLE BRAID - STAR QUAD 100 OHMS - TYPE KD - PRODUCT STANDARD
    EN 2267-005 : 2006 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 005: UV LASER PRINTABLE - PRODUCT STANDARD
    EN 4611-008 : 2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 008: BP - NICKEL PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS WITH ADDITIONAL PROTECTION IN AREAS OF HIGH VIBRATION, CABLE FLEXING AND FLUID CONTAMINATION - UV LASER PRINTABLE - PRODUCT STANDARD
    EN 4604-004 : 2007 AEROSPACE SERIES - CABLE, ELECTRICAL, FOR SIGNAL TRANSMISSION - PART 004: CABLE, MICROCOAXIAL, HIGH IMMUNITY, 50 OHMS, 200 DEGREES C, TYPE WS - PRODUCT STANDARD
    EN 4608-005 : 2012 AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - SINGLE AND TWISTED MULTICORE ASSEMBLY, SCREENED (BRAIDED) AND JACKETED - OPERATING TEMPERATURES BETWEEN -65 DEGREE C AND 260 DEGREE C - PART 005: DW FAMILY - LIGHTWEIGHT TWO-CORE GAUGE 24 FOR DATA TRANSMISSION - UV LASER PRINTABLE - PRODUCT STANDARD
    EN 2714-005 : 2006 AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 005: SCREENED (SPIRAL) AND JACKETED, CO[2] LASER PRINTABLE - PRODUCT STANDARD
    EN 2346-003 : 2006 AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 260 DEGREES C - PART 003: DL FAMILY, SINGLE CORE - PRODUCT STANDARD
    EN 3375-006 : 2006 AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 006: SINGLE BRAID - 78 OHMS - TYPE XM - PRODUCT STANDARD
    EN 4604-008 : 2009 AEROSPACE SERIES - CABLE, ELECTRICAL, FOR SIGNAL TRANSMISSION - PART 008: CABLE, COAXIAL, 50 OHMS, 200 DEGREES C, TYPE WD - PRODUCT STANDARD
    EN 2713-005 : 2006 AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 200 DEGREES C - PART 005: SCREENED (SPIRAL) AND JACKETED, CO[2] LASER PRINTABLE - PRODUCT STANDARD
    EN 2714-008 : 2006 AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 008: SCREENED (BRAIDED) AND JACKETED, UV LASER PRINTABLE - PRODUCT STANDARD
    EN 2713-006 : 2006 AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 200 DEGREES C - PART 006: SCREENED (BRAIDED) AND JACKETED, CO[2] LASER PRINTABLE - PRODUCT STANDARD
    EN 2713-009 : 2006 AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 200 DEGREES C - PART 009: SCREENED (SPIRAL) AND JACKETED, YAG X3 LASER PRINTABLE - PRODUCT STANDARD
    EN 3375-005 : 2007 AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 005: DOUBLE BRAID + METALLIC LAYER - 77 OHMS - TYPE WV - PRODUCT STANDARD
    EN 4608-003 : 2012 AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - SINGLE AND TWISTED MULTICORE ASSEMBLY, SCREENED (BRAIDED) AND JACKETED - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 260 DEGREES C - PART 003: DN FAMILY - LIGHTWEIGHT - UV LASER PRINTABLE - PRODUCT STANDARD
    EN 2713-008 : 2006 Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 008: Screened (braided) and jacketed, UV laser printable - Product standard
    EN 3375-003 : 2007 AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 003: SINGLE BRAID - 77 OHMS - TYPE KG - PRODUCT STANDARD
    EN 4608-001 : 2006 AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - SINGLE AND TWISTED MULTICORE ASSEMBLY, SCREENED (BRAIDED) AND JACKETED - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 260 DEGREES C - PART 001: TECHNICAL SPECIFICATION
    EN 3375-004 : 2007 AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 004: DOUBLE BRAID - 77 OHMS - TYPE WJ - PRODUCT STANDARD
    EN 2714-009 : 2007 AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 009: SCREENED (SPIRAL) AND JACKETED, YAG X3 LASER PRINTABLE - PRODUCT STANDARD
    EN 2714-006 : 2006 Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 006: Screened (braided) and jacketed, CO2 laser printable - Product standard
    EN 4681-006 : 2015 AEROSPACE SERIES - CABLES, ELECTRIC, GENERAL PURPOSE, WITH CONDUCTORS IN ALUMINIUM OR COPPER-CLAD ALUMINIUM - PART 006: AZA FAMILY, SINGLE AND MULTICORE ASSEMBLY, FOR USE IN LOW PRESSURE ATMOSPHERE - PRODUCT STANDARD
    EN 2713-010 : 2006 AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 200 DEGREES C - PART 010: SCREENED (BRAIDED) AND JACKETED, YAG X3 LASER PRINTABLE - PRODUCT STANDARD
    EN 2714-004 : 2006 AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 004: SCREENED (BRAIDED) AND JACKETED, INK JET PRINTABLE - PRODUCT STANDARD
    DD IEC TS 60695-1-20 : DRAFT MAR 2008 FIRE HAZARD TESTING - PART 1-20: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - IGNITABILITY - GENERAL GUIDANCE
    14/30314190 DC : 0 BS EN 3375-007 - AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 007: DOUBLE BRAID - 77 OHMS - TYPE WW - PRODUCT STANDARD
    BS EN 4608-005:2012 AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - SINGLE AND TWISTED MULTICORE ASSEMBLY, SCREENED (BRAIDED) AND JACKETED - OPERATING TEMPERATURES BETWEEN -65 DEGREE C AND 260 DEGREE C - PART 005: DW FAMILY - LIGHTWEIGHT TWO-CORE GAUGE 24 FOR DATA TRANSMISSION - UV LASER PRINTABLE - PRODUCT STANDARD
    BS EN 3375-008:2009 Aerospace series. Cable, electrical, for digital data transmission Single braid. Star Quad 100 Ohms. Type KD. Product standard
    09/30202389 DC : 0 BS EN 4681-004 - AEROSPACE SERIES - CABLES, ELECTRIC, GENERAL PURPOSE, WITH CONDUCTORS IN ALUMINIUM OR COPPER-CLAD ALUMINIUM - PART 004: ADA FAMILY, SINGLE AND MULTICORE ASSEMBLY - PRODUCT STANDARD
    EN 2854-003 : 2009 AEROSPACE SERIES - CABLES, ELECTRICAL FOR GENERAL PURPOSE - CROSS SECTIONS EQUAL TO AND GREATER THAN 9 MM[2] - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 003: PRODUCT STANDARD
    PREN 4604-001 : 200P4 AEROSPACE SERIES CABLE, ELECTRICAL, FOR SIGNAL TRANSMISSION - PART 001: TECHNICAL SPECIFICATION
    UNI EN 4611-008 : 2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 008: BP - NICKEL PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS WITH ADDITIONAL PROTECTION IN AREAS OF HIGH VIBRATION, CABLE FLEXING AND FLUID CONTAMINATION - UV LASER PRINTABLE - PRODUCT STANDARD
    UNI EN 4611-004 : 2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 004: TIN PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 135 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD
    PREN 3375-004 : 0 AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 004: DOUBLE BRAID - 77 OHMS - TYPE WJ - PRODUCT STANDARD
    BS EN 4611-004:2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 004: TIN PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 135 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD
    I.S. EN 3375-001:2007 AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 001: TECHNICAL SPECIFICATION
    NF EN 3375-001 : 2008 AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 001: TECHNICAL SPECIFICATION
    UNI EN 4611-006 : 2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 006: SILVER PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD
    EN 4604-007:2007 AEROSPACE SERIES - CABLE, ELECTRICAL, FOR SIGNAL TRANSMISSION - PART 007: CABLE, COAXIAL 50 OHMS, 200 DEGREE C, TYPE WN - PRODUCT STANDARD
    EN 4611-006 : 2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 006: SILVER PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD
    BS EN 4611-005:2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 005: SILVER PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - SINGLE EXTRUDED WALL FOR ENCLOSED APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD
    I.S. EN 3375-008:2009 AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 008: SINGLE BRAID - STAR QUAD 100 OHMS - TYPE KD - PRODUCT STANDARD
    I.S. EN 4604-001:2009 AEROSPACE SERIES - CABLE, ELECTRICAL, FOR SIGNAL TRANSMISSION - PART 001: TECHNICAL SPECIFICATION
    BS EN 4604-004 : 2007 AEROSPACE SERIES - CABLE, ELECTRICAL, FOR SIGNAL TRANSMISSION - PART 004: CABLE, MICROCOAXIAL, HIGH IMMUNITY, 50 OHMS, 200 DEGREES C, TYPE WS - PRODUCT STANDARD
    BS EN 4604-001:2009 AEROSPACE SERIES - CABLE, ELECTRICAL, FOR SIGNAL TRANSMISSION - PART 001: TECHNICAL SPECIFICATION
    BS EN 2714-004:2006 AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 004: SCREENED (BRAIDED) AND JACKETED, INK JET PRINTABLE - PRODUCT STANDARD
    EN 60695-1-20 : 2016 Fire hazard testing - Part 1-20: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - General guidance

    Standards Referencing This Book - (Show below) - (Hide below)

    EN 3475-302 : 2006 AEROSPACE SERIES - CABLE, ELECTRICAL, AIRCRAFT USE - TEST METHODS - PART 302: VOLTAGE PROOF TEST
    A A 52083 : D TAPE, LACING AND TYING, GLASS
    EN 3475-100 : 2010 AEROSPACE SERIES - CABLES, ELECTRICAL, AIRCRAFT USE - TEST METHODS - PART 100: GENERAL
    EN 2350 : 1990 AEROSPACE SERIES - CIRCUIT BREAKERS - TECHNICAL SPECIFICATION
    EN 3197 : 2010 AEROSPACE SERIES - DESIGN AND INSTALLATION OF AIRCRAFT ELECTRICAL AND OPTICAL INTERCONNECTION SYSTEMS
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective