• EN 55011:2016/A1:2017

    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

    INDUSTRIAL, SCIENTIFIC AND MEDICAL EQUIPMENT - RADIO-FREQUENCY DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT (CISPR 11:2015/A1:2016)

    Available format(s): 

    Superseded date:  29-01-2022

    Language(s): 

    Published date:  21-04-2017

    Publisher:  European Committee for Standards - Electrical

    Pure ENs are not available for sale, please purchase a suitable national adoption

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    FOREWORD
    INTRODUCTION
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 National measures and frequencies designated
       for ISM use
    5 Classification of equipment
    6 Limits of electromagnetic disturbances
    7 Measurement requirements
    8 Special provisions for test site measurements
       (9 kHz to 1 GHz)
    9 Radiation measurements: 1 GHz to 18 GHz
    10 Measurement in situ
    11 Safety precautions for emission measurements
       on ISM RF equipment
    12 Measurement uncertainty
    Annex A (informative) - Examples of equipment classification
    Annex B (informative) - Precautions to be taken in the use of
            a spectrum analyzer
    Annex C (normative) - Measurement of electromagnetic
            radiation disturbance in the presence of signals from
            radio transmitters
    Annex D (informative) - Propagation of interference from
            industrial radio-frequency equipment at frequencies
            between 30 MHz and 300 MHz
    Annex E (informative) - Recommendations of CISPR
            for protection of certain radio services in particular
            areas
    Annex F (informative) - Frequency bands allocated for
            safety-related radio services
    Annex G (informative) - Frequency bands allocated for
            sensitive radio services
    Annex H (informative) - Statistical assessment of series
            produced equipment against the requirements of
            CISPR standards
    Annex I (normative) - Artificial Network (AN) for the
            assessment of disturbance voltages at d.c. power
            ports of semiconductor power converters
    Annex J (informative) - Measurements on Grid Connected
            Power Converters (GCPC) - Setups for an effective test
            site configuration
    Annex K (informative) - Test site configuration and
            instrumentation - Guidance on prevention of saturation
            effects in mitigation filters of transformer-less power
            converters during type tests according to this standard
    Bibliography
    Annex ZA (normative) - Normative references to
             international publications with their
             corresponding European publications
    Annex ZB (normative) - Frequencies designated on
             a national basis in CENELEC countries for use
             as fundamental ISM frequencies
    Annex ZZ (informative) - Coverage of Essential
             Requirements of EU Directives

    Abstract - (Show below) - (Hide below)

    Pertains to industrial, scientific and medical electrical equipment operating in the frequency range 0 Hz to 400 GHz and to domestic and similar appliances designed to generate and/or use locally radio-frequency energy.

    General Product Information - (Show below) - (Hide below)

    Committee TC 210
    Document Type Standard
    Publisher European Committee for Standards - Electrical
    Status Superseded
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    DIN EN 60601-2-30 : 2000 MEDICAL ELECTRICAL EQUIPMENT - PART 2-30: PARTICULAR REQUIREMENTS FOR THE SAFETY, INCLUDING ESSENTIAL PERFORMANCE, OF AUTOMATIC CYCLING NON-INVASIVE BLOOD PRESSURE MONITORING EQUIPMENT
    CEI EN 60601-1-11 : 2016 MEDICAL ELECTRICAL EQUIPMENT - PART 1-11: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS USED IN THE HOME HEALTHCARE ENVIRONMENT
    CLC/TS 50217 : 2005 GUIDE FOR IN SITU MEASUREMENTS - IN SITU MEASUREMENT OF DISTURBANCE EMISSION
    CEI EN 62026-7 : 2013 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 7: COMPONET
    CEI EN 60947-4-3 : 2015 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-3: CONTACTORS AND MOTOR-STARTERS - AC SEMICONDUCTOR CONTROLLERS AND CONTACTORS FOR NON-MOTOR LOADS
    BS EN 61869-1 : 2009 INSTRUMENT TRANSFORMERS - PART 1: GENERAL REQUIREMENTS
    BS EN 50240 : 2004
    BS EN 61481-1 : 2014 LIVE WORKING - PHASE COMPARATORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C.
    I.S. EN 60947-5-1:2017 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES
    CLC/TR 50484 : 2009 RECOMMENDATIONS FOR SHIELDED ENCLOSURES
    CEI EN 61869-6 : 1ED 2017 INSTRUMENT TRANSFORMERS - PART 6: ADDITIONAL GENERAL REQUIREMENTS FOR LOW-POWER INSTRUMENT TRANSFORMERS
    I.S. EN 62026-1:2007 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 1: GENERAL RULES
    CEI EN 61922 : 2003 HIGH FREQUENCY INDUCTION HEATING INSTALLATIONS - TEST METHODS FOR THE DETERMINATION OF POWER OUTPUT OF THE GENERATOR
    BS PD CLC/TR 50484 : 2009 RECOMMENDATIONS FOR SHIELDED ENCLOSURES
    BS EN 60770-3:2014 (published 2014-09) Transmitters for use in industrial-process control systems Methods for performance evaluation of intelligent transmitters
    BS EN 60601-1-12:2015 (published 2015-06) Medical electrical equipment General requirements for basic safety and essential performance. Collateral Standard: Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment
    BS EN 15848 : 2010 WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - ADJUSTABLE CHEMICAL DOSING SYSTEMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
    BS EN 60601-2-30:2000 Medical electrical equipment. Particular requirements for safety Particular requirements for safety, including essential performance, of automatic cycling non-invasive blood pressure monitoring equipment
    EN 61326-1:2013 ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 1: GENERAL REQUIREMENTS (IEC 61326-1:2012)
    BS EN ISO 10439-1 : 2015 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS - PART 1: GENERAL REQUIREMENTS
    09/30192323 DC : 0 BS EN 13637 - BUILDING HARDWARE - ELECTRICALLY CONTROLLED EXIT SYSTEMS FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS
    I.S. EN ISO 8230-1:2008 SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS
    CEI EN 60601-1-2 : 2016 MEDICAL ELECTRICAL EQUIPMENT - PART 1-2: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: ELECTROMAGNETIC DISTURBANCES - REQUIREMENTS AND TESTS
    EN 60947-5-1:2017 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES (IEC 60947-5-1:2016 + COR1:2016)
    04/30116621 DC : DRAFT JUL 2004 EN 50121-3-2 - RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 3-2: ROLLING STOCK - APPARATUS
    PREN 12405-3 : DRAFT 2013 GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
    BS EN 60034-1 : 2010 ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE
    08/30183463 DC : DRAFT AUG 2008 BS EN 15848 - WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - ADJUSTABLE CHEMICAL DOSING SYSTEMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
    UNI EN 15848 : 2010 WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - ADJUSTABLE CHEMICAL DOSING SYSTEMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
    CLC/TR 50485 : 2010 ELECTROMAGNETIC COMPATIBILITY - EMISSION MEASUREMENTS IN FULLY ANECHOIC CHAMBERS
    DIN EN 12405-3:2016-04 Gas meters - Conversion devices - Part 3: Flow computer
    DIN EN 12405-2:2012-10 GAS METERS - CONVERSION DEVICES - PART 2: ENERGY CONVERSION
    EN 61439-1:2011 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES (IEC 61439-1:2011)
    CEI R210-010 : 2004 ELECTROMAGNETIC COMPATIBILITY - EMISSION MEASUREMENTS IN FULLY ANECHOIC CHAMBERS
    I.S. EN 60947-4-3:2014 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-3: CONTACTORS AND MOTOR-STARTERS - AC SEMICONDUCTOR CONTROLLERS AND CONTACTORS FOR NON-MOTOR LOADS
    I.S. EN 55104:1996 ELECTROMAGNETIC COMPATIBILITY IMMUNITY REQUIREMENTS FOR HOUSEHOLD APPLIANCES, TOOLS AND SIMILAR APPARATUS PRODUCT FAMILY STANDARD
    I.S. ETS 300 157:1993 SATELLITE EARTH STATIONS (SES) - RECEIVE-ONLY VERY SMALL APERTURE TERMINALS (VSATS) USED FOR DATA DISTRIBUTION OPERATING IN THE 11/12 GHZ FREQUENCY BANDS
    I.S. EN 12405-2:2012 GAS METERS - CONVERSION DEVICES - PART 2: ENERGY CONVERSION
    I.S. EN 60694:1999 COMMON SPECIFICATIONS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS
    S.R. HD 60364-5-51:2009 ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5-51: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - COMMON RULES
    I.S. EN 55015:2013 LIMITS AND METHODS OF MEASUREMENT OF RADIO DISTURBANCE CHARACTERISTICS OF ELECTRICAL LIGHTING AND SIMILAR EQUIPMENT
    I.S. EN 60974-10:2014 ARC WELDING EQUIPMENT - PART 10: ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS
    BS EN 60947-4-3 : 2014 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-3: CONTACTORS AND MOTOR-STARTERS - AC SEMICONDUCTOR CONTROLLERS AND CONTACTORS FOR NON-MOTOR LOADS
    I.S. EN 60204-31:2013 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 31: PARTICULAR SAFETY AND EMC REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS (IEC 60204-31:2013 (EQV))
    EN 62271-1:2017 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: COMMON SPECIFICATIONS FOR ALTERNATING CURRENT SWITCHGEAR AND CONTROLGEAR (IEC 62271-1:2017)
    BS EN 55022 : 2010 INFORMATION TECHNOLOGY EQUIPMENT - RADIO DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT
    BS EN 12405-1 : 2005 GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
    I.S. EN 61869-6:2016 INSTRUMENT TRANSFORMERS - PART 6: ADDITIONAL GENERAL REQUIREMENTS FOR LOW-POWER INSTRUMENT TRANSFORMERS
    I.S. EN 50370-1:2005 ELECTROMAGNETIC COMPATIBILITY (EMC) - PRODUCT FAMILY STANDARD FOR MACHINE TOOLS - PART 1: EMISSION
    UNI EN 12405-1 : 2010 GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
    NF EN 45502-2-3 : 2010 ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 2-3: PARTICULAR REQUIREMENTS FOR COCHLEAR AND AUDITORY BRAINSTEM IMPLANT SYSTEMS
    NF EN 302998-1 : 2011 ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM) - TRANSMITTING EQUIPMENT FOR TERRESTRIAL MOBILE TV TO PROVIDE MULTIMEDIA MULTICAST SERVICE - PART 1: HARMONIZED EN COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.2 OF THE R&TTE DIRECTIVE, COMMON REQUIREMENTS (V1.1.1)
    I.S. EN 60947-5-9:2007 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-9: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - FLOW RATE SWITCHES
    BS EN 62026-2:2013 Low-voltage switchgear and controlgear. Controller-device interfaces (CDIs) Actuator sensor interface (AS-i)
    DIN EN 13763-26:2004-11 Explosives for civil uses - Detonators and relays - Part 26: Definitions, methods and requirements for devices and accessories for reliable and safe function of detonators and relays; German version EN 13763-26:2004
    BS EN 60519-1:2015 Safety in installations for electroheating and electromagnetic processing General requirements
    BS EN 62026-3:2015 Low-voltage switchgear and controlgear. Controller-device interfaces (CDIs) DeviceNet
    BS EN 61851-21 : 2002 ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - ELECTRIC VEHICLE REQUIREMENTS FOR CONDUCTIVE CONNECTION TO AN A.C/D.C. SUPPLY
    UNE-EN 61812-1:2012 Time relays for industrial and residential use - Part 1: Requirements and tests
    BS EN 12015:2014 ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD FOR LIFTS, ESCALATORS AND MOVING WALKS - EMISSION
    BS EN 13763-26 : 2004 EXPLOSIVES FOR CIVIL USES - DETONATORS AND RELAYS - PART 26: DEFINITIONS, METHODS AND REQUIREMENTS FOR DEVICES AND ACCESSORIES FOR RELIABLE AND SAFE FUNCTION OF DETONATORS AND RELAYS
    UNE-EN 62870:2016 Electrical installations for lighting and beaconing of aerodromes - Safety secondary circuits in series circuits - General safety requirements
    BS EN 60519-11 : 2007 SAFETY IN ELECTROHEAT INSTALLATIONS - PART 11: PARTICULAR REQUIREMENTS FOR INSTALLATIONS USING THE EFFECT OF ELECTROMAGNETIC FORCES ON LIQUID METALS
    BS EN ISO 16201:2006 Technical aids for disabled persons. Environmental control systems for daily living
    BS EN ISO 10472-1 : 2008 SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 1: COMMON REQUIREMENTS
    BS EN 61439-1:2011 Low-voltage switchgear and controlgear assemblies General rules
    I.S. EN 14812:2005 WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - CHEMICAL DOSING SYSTEMS - PRE-SET DOSING SYSTEMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
    DIN EN 14095:2004-03 WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - ELECTROLYTIC TREATMENT SYSTEMS WITH ALUMINIUM ANODES - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
    EN 50325-3:2001 INDUSTRIAL COMMUNICATIONS SUBSYSTEM BASED ON ISO 11898 (CAN) FOR CONTROLLER-DEVICE INTERFACES - SMART DISTRIBUTED SYSTEM (SDS)
    EN 12405-2 : 2012 GAS METERS - CONVERSION DEVICES - PART 2: ENERGY CONVERSION
    EN 61187:1994/corrigendum:1995 ELECTRICAL AND ELECTRONIC MEASURING EQUIPMENT - DOCUMENTATION
    CLC/TR 50538 : 2010 Guide to EMC Directive conformity of equipment designed for military purposes
    EN 60947-6-1:2005/A1:2014 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 6-1: MULTIPLE FUNCTION EQUIPMENT - TRANSFER SWITCHING EQUIPMENT (IEC 60947-6-1:2005/A1:2013)
    EN 60947-4-3:2014 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-3: CONTACTORS AND MOTOR-STARTERS - AC SEMICONDUCTOR CONTROLLERS AND CONTACTORS FOR NON-MOTOR LOADS (IEC 60947-4-3:2014)
    EN 60034-22:2009 ROTATING ELECTRICAL MACHINES - PART 22: AC GENERATORS FOR RECIPROCATING INTERNAL COMBUSTION (RIC) ENGINE DRIVEN GENERATING SETS
    EN 60694:1996/A2:2001 COMMON SPECIFICATIONS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS
    HD 60364-5-51:2009/A12:2017 ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5-51: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - COMMON RULES
    EN 61922 : 2002 HIGH-FREQUENCY INDUCTION HEATING INSTALLATIONS - TEST METHODS FOR THE DETERMINATION OF POWER OUTPUT OF THE GENERATOR
    EN 60730-1:2016 AUTOMATIC ELECTRICAL CONTROLS - PART 1: GENERAL REQUIREMENTS (IEC 60730-1:2013, MODIFIED + COR1:2014)
    EN 60947-4-2:2012 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-2: CONTACTORS AND MOTOR-STARTERS - AC SEMICONDUCTOR MOTOR CONTROLLERS AND STARTERS (IEC 60947-4-2:2011)
    EN 60519-1:2015 SAFETY IN INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - PART 1: GENERAL REQUIREMENTS (IEC 60519-1:2015)
    EN 60947-8:2003/A2:2012 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 8: CONTROL UNITS FOR BUILT-IN THERMAL PROTECTION (PTC) FOR ROTATING ELECTRICAL MACHINES (IEC 60947-8:2003/A2:2011)
    EN 60601-1-2:2015 MEDICAL ELECTRICAL EQUIPMENT - PART 1-2: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: ELECTROMAGNETIC DISTURBANCES - REQUIREMENTS AND TESTS (IEC 60601-1-2:2014)
    EN 12405 : 2002 GAS METERS - GAS-VOLUME ELECTRONIC CONVERSION DEVICES
    DIN EN 12015:1998-08 ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD FOR LIFTS, ESCALATORS AND MOVING WALKS - EMISSION
    EN 60947-4-1 : 2010 AMD 1 2012 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS (IEC 60947-4-1:2009/A1:2012)
    EN 55022:2010/AC:2011 INFORMATION TECHNOLOGY EQUIPMENT - RADIO DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT (CISPR 22:2008)
    EN 61869-6 : 2016 INSTRUMENT TRANSFORMERS - PART 6: ADDITIONAL GENERAL REQUIREMENTS FOR LOW-POWER INSTRUMENT TRANSFORMERS (IEC 61869-6:2016)
    EN 61822:2009 ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - CONSTANT CURRENT REGULATORS
    EN 50325-4:2002 Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces - Part 4: CANopen
    EN 61514-2:2013 INDUSTRIAL PROCESS CONTROL SYSTEMS - PART 2: METHODS OF EVALUATING THE PERFORMANCE OF INTELLIGENT VALVE POSITIONERS WITH PNEUMATIC OUTPUTS MOUNTED ON AN ACTUATOR VALVE ASSEMBLY (IEC 61514-2:2013)
    EN 61481-1 : 2014 LIVE WORKING - PHASE COMPARATORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C. (IEC 61481-1:2014)
    EN 60947-6-2:2003/A1:2007 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 6-2: MULTIPLE FUNCTION EQUIPMENT - CONTROL AND PROTECTIVE SWITCHING DEVICES (OR EQUIPMENT) (CPS)
    EN 50091-2:1995/corrigendum Jan. 1998
    BS EN 60947-4-1 : 2010 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS
    CEI EN 61362 : 2013 GUIDE TO SPECIFICATION OF HYDRAULIC TURBINE GOVERNING SYSTEMS
    CEI EN 62282-3-201 : 2014 FUEL CELL TECHNOLOGIES - PART 3-201: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS FOR SMALL FUEL CELL POWER SYSTEMS
    I.S. EN 61326-1:2013 ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 1: GENERAL REQUIREMENTS (IEC 61326-1:2012 (EQV))
    10/30231432 DC : 0 BS EN ISO 10439-1 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS - PART 1: GENERAL REQUIREMENTS
    PREN 12405-1 : DRAFT 2017 GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
    BS EN 60974-10 : 2014 ARC WELDING EQUIPMENT - PART 10: ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS
    UNE-EN 61481-1:2015 Live working - Phase comparators - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c.
    NF EN 302018-2 : 2006 ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM) - TRANSMITTING EQUIPMENT FOR THE FREQUENCY MODULATED (FM) SOUND BROADCASTING SERVICE - PART 2: HARMONIZED EN UNDER ARTICLE 3.2 OF THE R&TTE DIRECTIVE
    BS EN 62026-7 : 2013 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 7: COMPONET
    UNE-EN 60947-5-2:2008 Low-voltage switchgear and controlgear -- Part 5-2: Control circuit devices and switching elements - Proximity switches.
    I.S. EN 12405:2002 GAS METERS - GAS-VOLUME ELECTRONIC CONVERSION DEVICES
    DIN EN 61187:1995-06 ELECTRICAL AND ELECTRONIC MEASURING EQUIPMENT - DOCUMENTATION
    BS EN 55016-4-2 : 2011 SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 4-2: UNCERTAINTIES, STATISTICS AND LIMIT MODELLING - MEASUREMENT INSTRUMENTATION UNCERTAINTY
    EN 303 446-1 : 1.1.0 DRAFT ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR COMBINED AND/OR INTEGRATED RADIO AND NON-RADIO EQUIPMENT; PART 1: REQUIREMENTS FOR EQUIPMENT INTENDED TO BE USED IN RESIDENTIAL, COMMERCIAL AND LIGHT INDUSTRY LOCATIONS; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.1(B) OF DIRECTIVE 2014/53/EU
    DD CLC/TS 50217 : 2005 GUIDE FOR IN SITU MEASUREMENTS - IN SITU MEASUREMENT OF DISTURBANCE EMISSION
    BS EN ISO 8230-1:2008 (published 2009-07) Safety requirements for dry-cleaning machines Common safety requirements
    BS EN 61481-2:2014 LIVE WORKING - PHASE COMPARATORS - PART 2: RESISTIVE TYPE TO BE USED FOR VOLTAGES FROM 1 KV TO 36 KV A.C.
    03/102517 DC : 0 BS EN 13633 - BUILDING HARDWARE - ELECTRICALLY CONTROLLED PANIC EXIT SYSTEMS - REQUIREMENTS AND TEST METHODS
    NF EN 61204-3 : 2001 LOW VOLTAGE POWER SUPPLIES, D.C. OUTPUT - PART 3: ELECTROMAGNETIC COMPATIBILITY (EMC)
    PD CLC/TR 50083-2-1:2014 (published 2014-10) Cable networks for television signals, sound signals and interactive services Electromagnetic compatibility measurements
    BS EN 50370-1:2005 Electromagnetic compatibility (EMC). Product family standard for machine tools Emission
    BS EN 50325-3:2001 INDUSTRIAL COMMUNICATIONS SUBSYSTEM BASED ON ISO 11898 (CAN) FOR CONTROLLER-DEVICE INTERFACES - PART 3: SMART DISTRIBUTED SYSTEM (SDS)
    BS EN 45502-2-3 : 2010 ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 2-3: PARTICULAR REQUIREMENTS FOR COCHLEAR AND AUDITORY BRAINSTEM IMPLANT SYSTEMS
    I.S. EN 61812-1:2011 TIME RELAYS FOR INDUSTRIAL AND RESIDENTIAL USE - PART 1: REQUIREMENTS AND TESTS
    03/111744 DC : DRAFT JULY 2003
    BS EN 50295 : 1999 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER AND DEVICE INTERFACE SYSTEMS - ACTUATOR SENSOR INTERFACE (AS-I)
    I.S. EN IEC 60601-2-2:2018 MEDICAL ELECTRICAL EQUIPMENT - PART 2-2: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HIGH FREQUENCY SURGICAL EQUIPMENT AND HIGH FREQUENCY SURGICAL ACCESSORIES
    BS EN 60940:2015 Guidance information on the application of capacitors, resistors, inductors and complete filter units for electromagnetic interference suppression
    95/214875 DC : 0 PREN 50222 - STANDARD FOR THE EVALUATION OF MEASUREMENT RESULTS TAKING MEASUREMENT UNCERTAINTY INTO ACCOUNT
    02/205818 DC : DRAFT JUN 2002 EN 50370-1 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PRODUCT FAMILY STANDARD FOR MACHINE TOOLS - PART 1: EMISSION
    CEI EN 60034-1 : 2015 ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE
    BS EN 60255-26:2013 Measuring relays and protection equipment Electromagnetic compatibility requirements
    UNE-EN 12405-3:2016 Gas meters - Conversion devices - Part 3: Flow computer
    CEI EN 61786-1 : 2014 MEASUREMENT OF DC MAGNETIC, AC MAGNETIC AND AC ELECTRIC FIELDS FROM 1 HZ TO 100 KHZ WITH REGARD TO EXPOSURE OF HUMAN BEINGS - PART 1: REQUIREMENTS FOR MEASURING INSTRUMENTS
    BS EN 60044-8:2002 Instrument transformers Electronic current transformers
    I.S. EN 61000-6-4:2007 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS
    I.S. EN 55016-4-2:2011 SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 4-2: UNCERTAINTIES, STATISTICS AND LIMIT MODELLING - MEASUREMENT INSTRUMENTATION UNCERTAINTY
    BS EN 62026-1:2007 Low-voltage switchgear and controlgear. Controller-device interfaces (CDIs) General rules
    I.S. EN 60947-6-2:2003 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - MULTIPLE FUNCTION EQUIPMENT - CONTROL AND PROTECTIVE SWITCHING DEVICES (OR EQUIPMENT) (CPS)
    S.R. CLC/TR 50485:2010 ELECTROMAGNETIC COMPATIBILITY - EMISSION MEASUREMENTS IN FULLY ANECHOIC CHAMBERS
    I.S. EN 60601-2-2:2009 MEDICAL ELECTRICAL EQUIPMENT - PART 2-2: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HIGH FREQUENCY SURGICAL EQUIPMENT AND HIGH FREQUENCY SURGICAL ACCESSORIES (IEC 60601-2-2:2009 (EQV))
    I.S. EN 50156-1:2015 ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 1: REQUIREMENTS FOR APPLICATION DESIGN AND INSTALLATION
    I.S. EN 60770-3:2014 TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 3: METHODS FOR PERFORMANCE EVALUATION OF INTELLIGENT TRANSMITTERS
    BS EN 60947-1 : 2007 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES
    EN 60947-2:2017 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 2: CIRCUIT-BREAKERS (IEC 60947-2:2016 + COR1:2016)
    UNE-EN 55016-4-2:2012 Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty
    CEI EN 60947-4-2 : 2013 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-2: CONTACTORS AND MOTOR-STARTERS - AC SEMICONDUCTOR MOTOR CONTROLLERS AND STARTERS
    BS EN 60947-5-2 : 2007 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-2: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - PROXIMITY SWITCHES
    S.R. CLC/TR 50083-2-1:2014 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 2-1: ELECTROMAGNETIC COMPATIBILITY MEASUREMENTS
    I.S. EN 60947-5-2:2008 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-2: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - PROXIMITY SWITCHES (IEC 60947-5-2:2007 (EQV))
    I.S. EN 61481-2:2014 LIVE WORKING - PHASE COMPARATORS - PART 2: RESISTIVE TYPE TO BE USED FOR VOLTAGES FROM 1 KV TO 36 KV A.C.
    I.S. EN 62026-7:2013 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 7: COMPONET (IEC 62026-7:2010 (MOD))
    CEI EN 62920 : 1ED 2018 PHOTOVOLTAIC POWER GENERATING SYSTEMS - EMC REQUIREMENTS AND TEST METHODS FOR POWER CONVERSION EQUIPMENT
    UNE-EN 55015:2013 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
    PREN 12015 : DRAFT 2012 ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD FOR LIFTS, ESCALATORS ANS MOVING WALKS - EMISSION
    I.S. EN 61557-9:2015 ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 9: EQUIPMENT FOR INSULATION FAULT LOCATION IN IT SYSTEMS
    EN 62026-3:2015 Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet
    I.S. EN 60947-8:2003 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 8: CONTROL UNITS FOR BUILT-IN THERMAL PROTECTION (PTC) FOR ROTATING ELECTRICAL MACHINES (IEC 60947-8:2003 (EQV))
    DIN EN 12957:2009-07 MACHINE TOOLS - SAFETY - ELECTRO DISCHARGE MACHINES
    ISO 10472-1:1997 Safety requirements for industrial laundry machinery Part 1: Common requirements
    BS EN ISO 10440-2:2001 (published 2002-10) Petroleum and natural gas industries. Rotary-type positive-displacement compressors Packaged air compressors (oil-free)
    BS EN 14812 : 2005 WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - CHEMICAL DOSING SYSTEMS - PRE-SET DOSING SYSTEMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
    EN 60947-3:2009/A2:2015 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 3: SWITCHES, DISCONNECTORS, SWITCH-DISCONNECTORS AND FUSE-COMBINATION UNITS (IEC 60947-3:2008/A2:2015)
    I.S. EN ISO 10472-1:2008 SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 1: COMMON REQUIREMENTS
    EN 60947-1:2007/A2:2014 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES (IEC 60947-1:2007/A2:2014)
    I.S. EN 14095:2004 WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - ELECTROLYTIC TREATMENT SYSTEMS WITH ALUMINIUM ANODES - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
    DIN EN 12405:2003-10 GAS METERS - GAS-VOLUME ELECTRONIC CONVERSION DEVICES
    EN 61557-8:2015/AC:2016-06 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 8: Insulation monitoring devices for IT systems
    DIN EN 12957:2001-12 MACHINE TOOLS - SAFETY - ELECTRO DISCHARGE MACHINES
    VDE 0414-44-7 : 2000 INSTRUMENT TRANSFORMERS - PART 7: ELECTRONIC VOLTAGE TRANSFORMERS
    DIN EN 60044-7 : 2000 INSTRUMENT TRANSFORMERS - PART 7: ELECTRONIC VOLTAGE TRANSFORMERS
    BS EN 60601-2-2 : 2009 MEDICAL ELECTRICAL EQUIPMENT - PART 2-2: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HIGH FREQUENCY SURGICAL EQUIPMENT AND HIGH FREQUENCY SURGICAL ACCESSORIES
    BS EN 61869-6 : 2016 INSTRUMENT TRANSFORMERS - PART 6: ADDITIONAL GENERAL REQUIREMENTS FOR LOW-POWER INSTRUMENT TRANSFORMERS
    CEI CLC/TR 50373 : 2005 WIND TURBINES - ELECTROMAGNETIC COMPATIBILITY
    09/30192320 DC : DRAFT MAY 2009 BS EN 13633 - BUILDING HARDWARE - ELECTRICALLY CONTROLLED PANIC EXIT SYSTEMS FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS
    12/30258326 DC : 0 BS EN 12015 - ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD FOR LIFTS, ESCALATORS ANS MOVING WALKS - EMISSION
    13/30289289 DC : 0 BS EN 12405-3 - GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
    I.S. EN 62026-2:2013 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 2: ACTUATOR SENSOR INTERFACE (AS-I) (IEC 62026-2:2008 (MOD))
    CEI EN 60044-7 : 2001 INSTRUMENT TRANSFORMERS - PART 7: ELECTRONIC VOLTAGE TRANSFORMERS
    NF EN 301489-11 : 2006 ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM) - ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES - PART 11: SPECIFIC CONDITIONS FOR TERRESTRIAL SOUND BROADCASTING SERVICE TRANSMITTERS
    UNE-EN 61362:2013 Guide to specification of hydraulic turbine governing systems
    CEI CLC/TR 50484 : 2010 RECOMMENDATIONS FOR SHIELDED ENCLOSURES
    UNI EN 12405-2 : 2012 GAS METERS - CONVERSION DEVICES - PART 2: ENERGY CONVERSION
    EN 61851-21 : 2002 ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - ELECTRIC VEHICLE REQUIREMENTS FOR CONDUCTIVE CONNECTION TO AN A.C/D.C. SUPPLY
    DIN ETS 300327:1995-08 SATELLITE EARTH STATIONS AND SYSTEMS (SES) - SATELLITE NEWS GATHERING (SNG) - TRANSPORTABLE EARTH STATIONS (TESS) (13-14/11-12 GHZ)
    R210-010 : 2002 ELECTROMAGNETIC COMPATIBILITY - EMISSION MEASUREMENTS IN FULLY ANECHOIC CHAMBERS
    BS EN 60947-4-2 : 2012 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-2: CONTACTORS AND MOTOR-STARTERS - AC SEMICONDUCTOR MOTOR CONTROLLERS AND STARTERS
    CEI EN 60947-5-9 : 2008 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-9: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - FLOW RATE SWITCHES
    UNI EN ISO 8230-1 : 2009 SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS
    EN 303 446-2 : 1.1.0 DRAFT ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR COMBINED AND/OR INTEGRATED RADIO AND NON-RADIO EQUIPMENT; PART 2: SPECIFIC CONDITIONS FOR EQUIPMENT INTENDED TO BE USED IN INDUSTRIAL LOCATIONS; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.1(B) OF DIRECTIVE 2014/53/EU
    I.S. EN 61514-2:2013 INDUSTRIAL PROCESS CONTROL SYSTEMS - PART 2: METHODS OF EVALUATING THE PERFORMANCE OF INTELLIGENT VALVE POSITIONERS WITH PNEUMATIC OUTPUTS MOUNTED ON AN ACTUATOR VALVE ASSEMBLY (IEC 61514-2:2013 (EQV))
    UNE-EN 55103-2:2010 Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 2: Immunity
    CEI EN 61812-1 : 2012 TIME RELAYS FOR INDUSTRIAL AND RESIDENTIAL USE - PART 1: REQUIREMENTS AND TESTS
    04/30124466 DC : DRAFT OCT 2004 EN 12405-1 - GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
    BS EN 50199 : 1996
    BS EN 62282-3-201:2017 Fuel cell technologies Stationary fuel cell power systems. Performance test methods for small fuel cell power systems
    I.S. EN 60034-22:2009 ROTATING ELECTRICAL MACHINES - PART 22: AC GENERATORS FOR RECIPROCATING INTERNAL COMBUSTION (RIC) ENGINE DRIVEN GENERATING SETS
    UNE-EN 61786-1:2014 Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings - Part 1: Requirements for measuring instruments
    BS PD CLC/TR 50538 : 2010 GUIDE TO EMC DIRECTIVE CONFORMITY OF EQUIPMENT DESIGNED FOR MILITARY PURPOSES
    BS EN 50325-2 : 2001 INDUSTRIAL COMMUNICATIONS SUBSYSTEM BASED ON ISO 11898 (CAN) FOR CONTROLLER-DEVICE INTERFACES - PART 2: DEVICENET
    BS EN 55104:1995 Electromagnetic compatibility. Immunity requirements for household appliances, tools and similar apparatus. Product family standard
    UNE-EN 60034-1:2011 Rotating electrical machines - Part 1: Rating and performance
    BS PD R210-010 : 2002 ELECTROMAGNETIC COMPATIBILITY - EMISSION MEASUREMENTS IN FULLY ANECHOIC CHAMBERS
    EN 303 417 : 1.1.1 WIRELESS POWER TRANSMISSION SYSTEMS, USING TECHNOLOGIES OTHER THAN RADIO FREQUENCY BEAM IN THE 19 - 21 KHZ, 59 - 61 KHZ, 79 - 90 KHZ, 100 - 300 KHZ, 6765 - 6795 KHZ RANGES; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.2 OF DIRECTIVE 2014/53/EU
    BS EN 50091-2 : 1996
    CEI EN 61326-1 : 2013 ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 1: GENERAL REQUIREMENTS
    BS EN 60947-3 : 2009 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 3: SWITCHES, DISCONNECTORS, SWITCH-DISCONNECTORS AND FUSE-COMBINATION UNITS
    BS EN 60947-5-1:2017 (published 2017-12) Low-voltage switchgear and controlgear Control circuit devices and switching elements. Electromechanical control circuit devices
    I.S. EN 55016-1-1:2010 SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 1-1: RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS - MEASURING APPARATUS
    I.S. EN 12405-3:2015 GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
    I.S. ETS 300 327:1995 SATELLITE EARTH STATIONS AND SYSTEMS (SES) - SATELLITE NEWS GATHERING (SNG) TRANSPORTABLE EARTH STATIONS (TESS) (13-14/11-12 GHZ)
    I.S. CLC/TS 50217:2005 GUIDE FOR IN SITU MEASUREMENTS - IN SITU MEASUREMENT OF DISTURBANCE EMISSION
    AS/RISSB 7722 : 2016 EMC Management
    BS EN 62271-1:2017 High-voltage switchgear and controlgear Common specifications for alternating current switchgear and controlgear
    BS EN 61000-6-4 : 2007 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS
    I.S. EN 60601-1-12:2015 MEDICAL ELECTRICAL EQUIPMENT - PART 1-12: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS INTENDED FOR USE IN THE EMERGENCY MEDICAL SERVICES ENVIRONMENT
    BS EN 55016-1-1 : 2010 SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 1-1: RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS - MEASURING APPARATUS
    I.S. EN 61439-1:2011 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES (IEC 61439-1:2011)
    UNE-EN 61481-2:2015 Live working - Phase comparators - Part 2: Resistive type to be used for voltages from 1 kV to 36 kV a.c.
    I.S. EN ISO 10439-1:2015 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS - PART 1: GENERAL REQUIREMENTS (ISO 10439-1:2015)
    I.S. EN 61326:1998
    I.S. EN 61786-1:2014 MEASUREMENT OF DC MAGNETIC, AC MAGNETIC AND AC ELECTRIC FIELDS FROM 1 HZ TO 100 KHZ WITH REGARD TO EXPOSURE OF HUMAN BEINGS - PART 1: REQUIREMENTS FOR MEASURING INSTRUMENTS
    I.S. EN 55022:2010 INFORMATION TECHNOLOGY EQUIPMENT - RADIO DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT (CISPR 22:2008)
    I.S. EN 62870:2015 ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - SAFETY SECONDARY CIRCUITS IN SERIES CIRCUITS - GENERAL SAFETY REQUIREMENTS
    VDE 0557-3 : 2001 COR 1 2004 LOW-VOLTAGE POWER SUPPLIES, D.C. OUTPUT - PART 3: PRODUCT EMC STANDARD
    CLC/TR 50083-2-1 : 2014 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 2-1: ELECTROMAGNETIC COMPATIBILITY MEASUREMENTS
    CLC/TR 50627:2015 STUDY REPORT ON ELECTROMAGNETIC INTERFERENCE BETWEEN ELECTRICAL EQUIPMENT/SYSTEMS IN THE FREQUENCY RANGE BELOW 150 KHZ
    S.R. CLC/TR 50627:2015 STUDY REPORT ON ELECTROMAGNETIC INTERFERENCE BETWEEN ELECTRICAL EQUIPMENT/SYSTEMS IN THE FREQUENCY RANGE BELOW 150 KHZ
    EN 12405-1:2005+A2:2010 GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
    I.S. EN 60601-1-2:2015 MEDICAL ELECTRICAL EQUIPMENT - PART 1-2: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: ELECTROMAGNETIC DISTURBANCES - REQUIREMENTS AND TESTS
    I.S. EN 62026-3:2015 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 3: DEVICENET
    I.S. EN 60947-2:2017 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 2: CIRCUIT-BREAKERS
    DIN EN ISO 10472-1:2009-10 Safety requirements for industrial laundry machinery - Part 1: Common requirements (ISO 10472-1:1997)
    DIN EN 14812 E : 2007 WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - CHEMICAL DOSING SYSTEMS - PRE-SET DOSING SYSTEMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
    DIN EN 12015:2014-09 Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Emission; German version EN 12015:2014
    UNE-EN 61557-8:2016 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 8: Insulation monitoring devices for IT systems
    ISO 10440-2:2001 Petroleum and natural gas industries Rotary-type positive-displacement compressors Part 2: Packaged air compressors (oil-free)
    UNE-EN 60947-4-1:2011 Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
    UNE-EN 61869-1:2010 Instrument transformers -- Part 1: General requirements
    CEI EN 60519-1 : 2016 SAFETY IN INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - PART 1: GENERAL REQUIREMENTS
    CEI EN 62026-2 : 2013 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 2: ACTUATOR SENSOR INTERFACE (AS-I)
    EN 60745-1:2009/A11:2010 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
    UNI EN 12015 : 2014 ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD FOR LIFTS, ESCALATORS AND MOVING WALKS - EMISSION
    EN 60745-1:2006 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
    EN 12015:2014 Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Emission
    EN 55016-4-2:2011/A1:2014 SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 4-2: UNCERTAINTIES, STATISTICS AND LIMIT MODELLING - MEASUREMENT INSTRUMENTATION UNCERTAINTY
    EN 300 330 : 2.1.1 SHORT RANGE DEVICES (SRD); RADIO EQUIPMENT IN THE FREQUENCY RANGE 9 KHZ TO 25 MHZ AND INDUCTIVE LOOP SYSTEMS IN THE FREQUENCY RANGE 9 KHZ TO 30 MHZ; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.2 OF DIRECTIVE 2014/53/EU
    UNE-EN 60730-1:2013 Automatic electrical controls for household and similar use - Part 1: General requirements
    EN 60601-1-12:2015 MEDICAL ELECTRICAL EQUIPMENT - PART 1-12: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS INTENDED FOR USE IN THE EMERGENCY MEDICAL SERVICES ENVIRONMENT (IEC 60601-1-12:2014)
    I.S. EN 12015:2014 ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD FOR LIFTS, ESCALATORS AND MOVING WALKS - EMISSION
    EN 13763-26 : 2004 EXPLOSIVES FOR CIVIL USES - DETONATORS AND RELAYS - PART 26: DEFINITIONS, METHODS AND REQUIREMENTS FOR DEVICES AND ACCESSORIES FOR RELIABLE AND SAFE FUNCTION OF DETONATORS AND RELAYS
    EN ISO 8230-1:2008 Safety requirements for dry-cleaning machines - Part 1: Common safety requirements (ISO 8230-1:2008)
    EN 15848 : 2010 WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - ADJUSTABLE CHEMICAL DOSING SYSTEMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
    EN 50199 : 95 AC 98
    UNI EN ISO 16201 : 2007 TECHNICAL AIDS FOR DISABLED PERSONS - ENVIRONMENTAL CONTROL SYSTEMS FOR DAILY LIVING
    UNI CEI EN 45502-2-3 : 2010 ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 2-3: PARTICULAR REQUIREMENTS FOR COCHLEAR AND AUDITORY BRAINSTEM IMPLANT SYSTEMS
    UNI EN ISO 10472-1 : 2009 SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 1: COMMON REQUIREMENTS
    UNI EN 12957 : 2009 MACHINE TOOLS - SAFETY - ELECTRO DISCHARGE MACHINES
    NFC 46 624 : 95 XP EIBUS BUS: A NETWORK FOR TECHNICAL AND ADMINISTRATIVE MANAGEMENT OF BUILDINGS - PHYSICAL LAYER
    DIN EN 15848:2010-06 Water conditioning equipment inside buildings - Adjustable chemical dosing systems - Requirements for performance, safety and testing
    CEI EN 60044-8 : 2004 INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRASFORMERS
    CEI EN 62026-1 : 2008 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 1: GENERAL RULES
    BS EN 12405-3 : 2015 GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
    BS EN 60044-7 : 2000 INSTRUMENT TRANSFORMERS - PART 7 - ELECTRONIC VOLTAGE TRANSFORMERS
    BS EN 55103-2:2009 Electromagnetic compatibility. Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use Immunity
    02/564996 DC : DRAFT NOV 2002 BS EN ISO 16201 - TECHNICAL AIDS FOR DISABLED PERSONS - REMOTE CONTROL SYSTEMS
    BS EN 60034-22:2009 (published 2010-02) Rotating electrical machines AC generators for reciprocating internal combustion (RIC) engine driven generating sets
    BS EN 62920:2017 Photovoltaic power generating systems. EMC requirements and test methods for power conversion equipment
    95/207614 DC : 0 PREN 50217 - EMC - STANDARD FOR IN-SITU EMISSION MEASUREMENTS
    I.S. EN 61204-3:2000 LOW VOLTAGE POWER SUPPLIES, D.C. OUTPUT - PART 3: ELECTROMAGNETIC COMPATIBILITY (EMC)
    BS PD CLC/TR 50627 : 2015 STUDY REPORT ON ELECTROMAGNETIC INTERFERENCE BETWEEN ELECTRICAL EQUIPMENT/SYSTEMS IN THE FREQUENCY RANGE BELOW 150 KHZ
    BS EN 61326-1:2013 Electrical equipment for measurement, control and laboratory use. EMC requirements General requirements
    BS EN 12405-2 : 2012 GAS METERS - CONVERSION DEVICES - PART 2: ENERGY CONVERSION
    CEI R210-003 : 1997 GUIDELINES ON HOW TO USE ANECHOIC ENCLOSURES THAT DO NOT FULFIL THE REQUIREMENTS REGARDING NORMALIZED SITE ATTENUATION FOR PRE-COMPLIANCE TESTS OF PRODUCTS
    BS EN 60601-1-2:2015 Medical electrical equipment General requirements for basic safety and essential performance. Collateral Standard. Electromagnetic disturbances. Requirements and tests
    BS PD CLC/TR 50373 : 2004 WIND TURBINES - ELECTROMAGNETIC COMPATIBILITY
    02/204840 DC : DRAFT APR 2002 PREN 50217 - IN SITU MEASUREMENTS OF DISTURBANCE EMISSION