Skip to content
Please enter a keyword to search

  • EN 60269-1:2007/A2:2014

    Current The latest, up-to-date edition.

    LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS (IEC 60269-1:2006/A2:2014)

    Available format(s): 

    Language(s): 

    Published date:  05-09-2014

    Publisher:  European Committee for Standards - Electrical

    Pure ENs are not available for sale, please purchase a suitable national adoption

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    FOREWORD
    INTRODUCTION
    1 General
    2 Terms and definitions
    3 Conditions for operation in service
    4 Classification
    5 Characteristics of fuses
    6 Markings
    7 Standard conditions for construction
    8 Tests
    Annex A (informative) - Measurement of short-circuit
            power factor
    Annex B (informative) - Calculation of pre-arcing I[2]t
            values for 'gG', 'gM', 'gD' and
            'gN' fuse-links and calculation
            of operating I[2]t values at
            reduced voltage
    Annex C (informative) - Calculation of cut-off current-time
            characteristics
    Annex D (informative) - Effect of change of ambient
            temperature and surroundings on
            the performance of fuse-links
    BIBLIOGRAPHY
    Annex ZA (normative) - Normative references to international
             publications with their corresponding
             European publications

    Abstract - (Show below) - (Hide below)

    Pertains to fuses incorporating enclosed current-limiting fuse-links with rated breaking capacities of not less than 6 kA, intended for protecting power-frequency a.c. circuits of nominal voltages not exceeding 1000 V or d.c. circuits of nominal voltages not exceeding 1500 V.

    General Product Information - (Show below) - (Hide below)

    Committee SR 32B
    Development Note Partially supersedes EN 60269-2. (05/2007) Supersedes EN 60269-3. (06/2017)
    Document Type Standard
    Publisher European Committee for Standards - Electrical
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    BS EN 45510-2-3:2000 Guide for the procurement of power station equipment Electrical equipment. Stationary batteries and chargers
    CEI EN 60947-4-3 : 2015 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-3: CONTACTORS AND MOTOR-STARTERS - AC SEMICONDUCTOR CONTROLLERS AND CONTACTORS FOR NON-MOTOR LOADS
    CEI EN 61881-1 : 2012 RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITORS FOR POWER ELECTRONICS - PART 1: PAPER/PLASTIC FILM CAPACITORS
    BS EN 61036:1997 Alternating current static watt-hour meters for active energy (classes 1 and 2)
    94/712993 DC : DRAFT NOV 1994 PREN 45511 - GUIDE FOR PROCUREMENT - ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR
    CEI EN 61534-1 : 2012 POWERTRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS
    I.S. HD 60269-3:2010 LOW-VOLTAGE FUSES - PART 3: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD AND SIMILAR APPLICATIONS) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO F (IEC 60269-3:2010 (MOD))
    BS EN 60831-1:2014 Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 000 V General. Performance, testing and rating. Safety requirements. Guide for installation and operation
    BS EN 60730-2-4:2007 Automatic electrical controls for household and similar use Particular requirements for thermal motor protectors for motor-compressors of hermetic and semi-hermetic type
    CEI EN 60269-6 : 2012 LOW-VOLTAGE FUSES - PART 6: SUPPLEMENTARY REQUIREMENTS FOR FUSE-LINKS FOR THE PROTECTION OF SOLAR PHOTOVOLTAIC ENERGY SYSTEMS
    UNE-EN 61534-1:2011 Powertrack systems -- Part 1: General requirements
    BS EN 61881:2000 Railway applications. Rolling stock equipment. Capacitors for power electronics
    DIN EN 45510-2-7:2003-12 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-7: ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR
    I.S. EN 60947-4-3:2014 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-3: CONTACTORS AND MOTOR-STARTERS - AC SEMICONDUCTOR CONTROLLERS AND CONTACTORS FOR NON-MOTOR LOADS
    I.S. EN 60694:1999 COMMON SPECIFICATIONS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS
    I.S. EN 60309-1:1999 PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 1: GENERAL REQUIREMENTS (IEC 60309-1:1999 (EQV))
    I.S. EN 61881-1:2011 RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITORS FOR POWER ELECTRONICS - PART 1: PAPER/PLASTIC FILM CAPACITORS
    BS EN 60947-4-3:2014 Low-voltage switchgear and controlgear Contactors and motor-starters. AC semiconductor controllers and contactors for non-motor loads
    BS EN 60947-2:2017 Low-voltage switchgear and controlgear Circuit-breakers
    EN 1366-11:2018 Fire resistance tests for service installations - Part 11: Fire protective systems for cable systems and associated components
    EN 60077-5:2003 Railway applications - Electrotechnical equipment for rolling stock - Part 5: Electrotechnical components - Rules for HV fuses
    UNI EN 81-22 : 2014 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 22: ELECTRIC LIFTS WITH INCLINED PATH
    EN 50178:1997 Electronic equipment for use in power installations
    EN 61881-1:2011 Railway applications - Rolling stock equipment - Capacitors for power electronics - Part 1: Paper/plastic film capacitors
    EN 50091-1-1:1996/corrigendum Aug. 2004
    CLC/TR 60269-5:2011 Low-voltage fuses - Part 5: Guidance for the application of low-voltage fuses
    EN 61058-1:2002/A2:2008 SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS
    EN 60947-4-3:2014 Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads
    EN 60694:1996/A2:2001 COMMON SPECIFICATIONS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS
    DIN VDE 0641-11 : 1992 CIRCUIT-BREAKERS FOR OVER CURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR INSTALLATIONS
    EN 60730-1:2016 Automatic electrical controls - Part 1: General requirements
    EN 60947-4-2:2012 Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters
    EN 60831-1:2014/AC:2014 SHUNT POWER CAPACITORS OF THE SELF-HEALING TYPE FOR A.C. SYSTEMS HAVING A RATED VOLTAGE UP TO AND INCLUDING 1000 V - PART 1: GENERAL - PERFORMANCE, TESTING AND RATING - SAFETY REQUIREMENTS - GUIDE FOR INSTALLATION AND OPERATION
    HD 60364-4-43:2010 Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent
    EN 60269-4:2009/A2:2016 LOW-VOLTAGE FUSES - PART 4: SUPPLEMENTARY REQUIREMENTS FOR FUSE-LINKS FOR THE PROTECTION OF SEMICONDUCTOR DEVICES (IEC 60269-4:2009/A2:2016)
    CEI EN 60730-2-4 : 2008 AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2: PARTICULAR REQUIREMENTS FOR THERMAL MOTOR PROTECTORS FOR MOTOR-COMPRESSORS OF HERMETIC AND SEMI-HERMETIC TYPE
    BS EN 45510-2-7:2002 Guide for the procurement of power station equipment. Electrical equipment Switchgear and controlgear
    DIN VDE 0660-100 : 1992 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES
    BS HD 60269-2:2013 Low-voltage fuses Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application). Examples of standardized systems of fuses A to K
    CEI UNI EN 45510-2-7 : 2006 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-7: ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR
    I.S. EN IEC 62613-1:2018 PLUGS, SOCKET-OUTLETS AND SHIP COUPLERS FOR HIGH-VOLTAGE SHORE CONNECTION SYSTEMS (HVSC-SYSTEMS) - PART 1: GENERAL REQUIREMENTS
    BS EN 61058-1 : 2002 SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS
    95/214875 DC : 0 PREN 50222 - STANDARD FOR THE EVALUATION OF MEASUREMENT RESULTS TAKING MEASUREMENT UNCERTAINTY INTO ACCOUNT
    BS EN 60439-5:2006 Low-voltage switchgear and controlgear assemblies Particular requirements for assemblies for power distribution in public networks
    BS EN 50178:1998 Electronic equipment for use in power installations
    CEI UNI EN 45510-2-4 : 2000 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-4: ELECTRICAL EQUIPMENT - HIGH POWER STATIC CONVERTORS
    EN 60947-2:2017 Low-voltage switchgear and controlgear - Part 2: Circuit-breakers
    I.S. EN 61071:2007 CAPACITORS FOR POWER ELECTRONICS
    I.S. EN 60077-5:2003 RAILWAY APPLICATIONS - ELECTROTECHNICAL EQUIPMENT FOR ROLLING STOCK - PART 5: ELECTROTECHNICAL COMPONENTS - RULES FOR HV FUSES
    I.S. HD 60269-2-1:2005 LOW-VOLTAGE FUSES - PART 2-1: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION) - SECTIONS 1 TO 6: EXAMPLES OF TYPES OF STANDARDIZED FUSES
    BS EN 62196-1:2014 Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles General requirements
    I.S. EN 60831-1:2014 SHUNT POWER CAPACITORS OF THE SELF-HEALING TYPE FOR A.C. SYSTEMS HAVING A RATED VOLTAGE UP TO AND INCLUDING 1000 V - PART 1: GENERAL - PERFORMANCE, TESTING AND RATING - SAFETY REQUIREMENTS - GUIDE FOR INSTALLATION AND OPERATION
    CEI EN 60947-4-2 : 2013 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-2: CONTACTORS AND MOTOR-STARTERS - AC SEMICONDUCTOR MOTOR CONTROLLERS AND STARTERS
    PREN 1366-11 : DRAFT 2014 FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 11: FIRE PROTECTIVE SYSTEMS FOR CABLE SYSTEMS AND ASSOCIATED COMPONENTS
    CEI EN 62196-1 : 2015 PLUGS, SOCKET-OUTLETS, VEHICLE CONNECTORS AND VEHICLE INLETS - CONDUCTIVE CHARGING OF ELECTRIC VEHICLES - PART 1: GENERAL REQUIREMENTS
    UNE-EN 62196-1:2015 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements
    EN 60947-1:2007/A2:2014 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES (IEC 60947-1:2007/A2:2014)
    BS 88-3:2007 Low-voltage fuses Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household or similar applications). Examples of standardized systems of fuses A to F
    BS 88-2(2013) : 2013 COR 2014 LOW-VOLTAGE FUSES - PART 2: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO K
    BS 88-2:2007 Low-voltage fuses Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application). Examples of standardized systems of fuses A to I
    BS 88-2(2010) : 2010 LOW-VOLTAGE FUSES - PART 2: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO J
    BS EN 60269-2:1995 Low-voltage fuses Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application)
    UNE-HD 60269-2:2014 Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K
    BS EN 60974-6:2016 Arc welding equipment Limited duty equipment
    UNE-EN 61008-1:2013 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules
    I.S. EN 115:1995 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF ESCALATORS AND PASSENGER CONVEYORS
    BS EN 60947-1 : 2007 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES
    I.S. EN 81-22:2014 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 22: ELECTRIC LIFTS WITH INCLINED PATH
    BS EN 60947-4-2:2012 Low-voltage switchgear and controlgear Contactors and motor-starters. AC semiconductor motor controllers and starters
    CEI 32-12 : 2014 LOW-VOLTAGE FUSES - PART 2: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO K
    BS EN 60077-5:2003 Railway applications. Electrotechnical equipment for rolling stock Electrotechnical components. Rules for HV fuses
    I.S. EN 61008-1:2012&A1:2014/ac&A2:2014...A12:2017 RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCBS) - PART 1: GENERAL RULES
    BS EN 61881-1:2011 Railway applications. Rolling stock equipment. Capacitors for power electronics Paper/plastic film capacitors
    EN 115-1:2017 Safety of escalators and moving walks - Part 1: Construction and installation
    BS EN 50463:2007 Railway applications. Energy measurement on board trains
    DIN EN 50091-1-1 : 1997
    EN 61534-1:2011/A1:2014 POWERTRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS (IEC 61534-1:2011/A1:2014)
    PREN 50577 : DRAFT 2012 ELECTRIC CABLES - FIRE RESISTANCE TEST FOR UNPROTECTED ELECTRIC CABLES (P CLASSIFICATION)
    BS EN 61008-1 : 2012 RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCBS) - PART 1: GENERAL RULES (IEC 61008-1:2010, MODIFIED)
    I.S. EN 115-1:2017 SAFETY OF ESCALATORS AND MOVING WALKS - PART 1: CONSTRUCTION AND INSTALLATION
    I.S. EN 61058-1:2002 SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS
    BS EN 60269-4 : 2009 LOW-VOLTAGE FUSES - PART 4: SUPPLEMENTARY REQUIREMENTS FOR FUSE-LINKS FOR THE PROTECTION OF SEMICONDUCTOR DEVICES (IEC 60269-4:2009)
    I.S. EN 60974-6:2016 ARC WELDING EQUIPMENT - PART 6: LIMITED DUTY EQUIPMENT
    I.S. EN 60439-5:2006 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 5: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR POWER DISTRIBUTION IN PUBLIC NETWORKS
    I.S. EN 60947-2:2017 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 2: CIRCUIT-BREAKERS
    I.S. EN 45510-2-7:2002 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-7: ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR
    EN 81-22:2014 Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 22: Electric lifts with inclined path
    ISO/TR 14799-1:2015 Comparison of worldwide escalator and moving walk safety standards Part 1: Rule by rule comparison
    I.S. EN 50300:2004 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS FOR LOW-VOLTAGE SUBSTATION CABLE DISTRIBUTION BOARDS
    BS EN 115:1995 Safety rules for the construction and installation of escalators and passenger conveyors.
    BS EN 81-22:2014 Safety rules for the construction and installation of lifts. Lifts for the transport of persons and goods Electric lifts with inclined path
    UNE-EN 81-22:2014 Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 22: Electric lifts with inclined path
    UNE-EN 60730-1:2013 Automatic electrical controls for household and similar use - Part 1: General requirements
    EN 300 132-2 : 2.4.6 ENVIRONMENTAL ENGINEERING (EE); POWER SUPPLY INTERFACE AT THE INPUT TO TELECOMMUNICATIONS AND DATACOM (ICT) EQUIPMENT; PART 2: OPERATED BY -48 V DIRECT CURRENT (DC)
    BS EN 60694:1997 Common specifications for high-voltage switchgear and controlgear standards
    BS EN 50300:2004 Low-voltage switchgear and controlgear assemblies. General requirements for low-voltage substation cable distribution boards
    EN 61008-1:2012/A12:2017 RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCBS) - PART 1: GENERAL RULES (IEC 61008-1:2010, MODIFIED)
    14/30299756 DC : 0 BS EN 1366-11 - FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 11: FIRE PROTECTIVE SYSTEMS FOR CABLE SYSTEMS AND ASSOCIATED COMPONENTS
    BS EN 61071:2007 Capacitors for power electronics
    BS HD 60269-3 : 2010 LOW-VOLTAGE FUSES - PART 3: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD AND SIMILAR APPLICATIONS) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO F
    12/30258453 DC : 0 BS EN 62368-1 AMD - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
    05/30133451 DC : 0 EN 115 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF ESCALATORS AND MOVING WALKS
    DIN VDE 0660-102 : 1992 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS
    01/712575 DC : DRAFT SEP 2001 ISO 13849-2 - SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEM - PART 2: VALIDATION
    UNI CEI EN 45510-2-7 : 2011 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-7: ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR
    UNE-EN 60947-4-3:2014 Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads
    UNE-EN 60269-4:2011 Low-voltage fuses -- Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices
    HD 60269-2-1:2005 Low-voltage fuses - Part 2-1: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Sections I to VI: Examples of types of standardized fuses
    I.S. EN 61036:1997 ALTERNATING CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 1 AND 2)
    I.S. EN 60269-4:2009 LOW-VOLTAGE FUSES - PART 4: SUPPLEMENTARY REQUIREMENTS FOR FUSE-LINKS FOR THE PROTECTION OF SEMICONDUCTOR DEVICES
    CEI 32-13 : 2013 LOW-VOLTAGE FUSES - PART 3: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD AND SIMILAR APPLICATIONS) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO F
    CEI UNI EN 45510-2-3 : 2000 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-3: ELECTRICAL EQUIPMENT - STATIONARY BATTERIES AND CHARGERS
    ISO/TR 14799-2:2015 Comparison of worldwide escalator and moving walk safety standards — Part 2: Abbreviated comparison and comments
    I.S. EN 60931-1:1997 SHUNT POWER CAPACITORS OF THE NON-SELF-HEALING TYPE FOR A.C. SYSTEMS HAVING A RATED VOLTAGE UP TO AN INCLUDING 1 KV - PART 1: GENERAL - PERFORMANCE, TESTING AND RATING - SAFETY REQUIREMENTS GUIDE FOR INSTALLATION AND OPERATION
    I.S. EN 60730-1:2016 AUTOMATIC ELECTRICAL CONTROLS - PART 1: GENERAL REQUIREMENTS
    S.R. CLC/TR 60269-5:2011 LOW-VOLTAGE FUSES - PART 5: GUIDANCE FOR THE APPLICATION OF LOW-VOLTAGE FUSES
    I.S. EN 61534-1:2011 POWERTRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS
    S.R. CLC/TR 50480:2011 DETERMINATION OF CROSS-SECTIONAL AREA OF CONDUCTORS AND SELECTION OF PROTECTIVE DEVICES
    I.S. HD 60364-4-43:2010 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-43: PROTECTION FOR SAFETY - PROTECTION AGAINST OVERCURRENT
    EN 60269-6:2011 Low-voltage fuses - Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems
    95/214868 DC : 0 PREN 50178 - ELECTRONIC EQUIPMENT FOR USE IN POWER INSTALLATIONS
    BS EN 60947-2:2017+A1:2020 Low-voltage switchgear and controlgear Circuit-breakers
    15/30324856 DC : 0 BS EN 115-1 - SAFETY OF ESCALATORS AND MOVING WALKS - PART 1: CONSTRUCTION AND INSTALLATION
    PD CLC/TR 50480:2011 Determination of cross-sectional area of conductors and selection of protective devices
    PD ISO/TR 14799-2:2005 Comparison of worldwide escalator and moving walk safety standards Abbreviated comparison and comments
    UNE-HD 60364-4-43:2013 Low-voltage electrical installations -- Part 4-43: Protection for safety - Protection against overcurrent
    EN 45510-2-7:2002 Guide for procurement of power station equipment - Part 2-7: Electrical equipment - Switchgear and controlgear
    EN 45510-2-3:2000 Guide for procurement of power station equipment - Part 2-4: Electrical equipment - Stationary batteries and chargers
    12/30260450 DC : 0 BS EN 50577 - ELECTRIC CABLES - FIRE RESISTANCE TEST FOR UNPROTECTED ELECTRIC CABLES (P CLASSIFICATION)
    CEI EN 60077-5 : 2004 RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 5: ELECTROTECHNICAL COMPONENTS - RULES FOR HV FUSES
    CEI EN 61071 : 2007 CAPACITORS FOR POWER ELECTRONICS
    DIN VDE 0660-101 : 1992 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 2: CIRCUIT BREAKERS
    BS EN 50091-1-1:1997 Uninterruptible power systems (UPS) General and safety requirements for UPS used in operator access areas
    BS EN 61534-1 : 2011 POWERTRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS
    BS 88-3(2010) : 2010 COR 2014 LOW-VOLTAGE FUSES - PART 3: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD AND SIMILAR APPLICATIONS) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO F
    BS EN 60269-6:2011 Low-voltage fuses Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems
    I.S. EN 60269-6:2011 LOW-VOLTAGE FUSES - PART 6: SUPPLEMENTARY REQUIREMENTS FOR FUSE-LINKS FOR THE PROTECTION OF SOLAR PHOTOVOLTAIC ENERGY SYSTEMS
    DIN EN 61881 : 2000 RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITORS FOR POWER ELECTRONICS
    EN IEC 62613-1:2018 Plugs, socket-outlets and ship couplers for high-voltage shore connection systems (HVSC-Systems) - Part 1: General requirements
    I.S. EN 60947-1:2007 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES
    I.S. HD 60269-2:2013 LOW-VOLTAGE FUSES - PART 2: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO K (IEC 60269-2:2013 (MOD))
    I.S. EN 60947-4-2:2012 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-2: CONTACTORS AND MOTOR-STARTERS - AC SEMICONDUCTOR MOTOR CONTROLLERS AND STARTERS
    CEI UNI EN 45510-2-2 : 1999 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-2: ELECTRICAL EQUIPMENT - UNINTERRUPTIBLE POWER SUPPLIES
    I.S. EN 50463:2007 RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS
    BS EN 60309-1 : 1999 PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 1: GENERAL REQUIREMENTS
    BS EN 115-1:2017 Safety of escalators and moving walks Construction and installation
    I.S. EN 50091-1-1:2004 UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 1-1: GENERAL AND SAFETY REQUIREMENTS FOR UPS USED IN OPERATOR ACCESS AREAS
    UNE-EN 60269-6:2012 Low-voltage fuses - Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems
    UNE-EN 62752:2017 In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD)
    I.S. EN 62196-1:2014 PLUGS, SOCKET-OUTLETS, VEHICLE CONNECTORS AND VEHICLE INLETS - CONDUCTIVE CHARGING OF ELECTRIC VEHICLES - PART 1: GENERAL REQUIREMENTS
    I.S. EN 60730-2-4:2007 AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-4: PARTICULAR REQUIREMENTS FOR THERMAL MOTOR PROTECTORS FOR MOTOR-COMPRESSORS OF HERMETIC AND SEMI-HERMETIC TYPE
    DIN EN 81-22:2014-12 Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 22: Electric lifts with inclined path
    BS EN 45510-2-2:1999 Guide for the procurement of power station equipment. Electrical equipment Uninterruptible power supplies - Uninterruptible power supplies for power plants
    PD ISO/TR 14799-1:2005 Comparison of worldwide escalator and moving walk safety standards Rule by rule comparison
    BS EN 60730-1:2011 Automatic electrical controls for household and similar use General requirements
    EN 60309-1:1999/A1:2007/AC:2014 PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 1: GENERAL REQUIREMENTS (IEC 60309-1:1999/A2:2012)
    EN 115:1995/A2:2004 SAFETY RULES FOR THE CONSTRUCTION & INSTALLATION OF ESCALATORS & PASSENGER CONVEYORS
    EN 60931-1:1996/A1:2003 SHUNT POWER CAPACITORS OF THE NON-SELF-HEALING TYPE FOR A.C. SYSTEMS HAVING A RATED VOLTAGE UP TO AND INCLUDING 1 KV - PART 1: GENERAL - PERFORMANCE, TESTING AND RATING - SAFETY REQUIREMENTS - GUIDE FOR INSTALLATION AND OPERATION
    EN 61036:1996/A1:2000 ALTERNATING CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 1 AND 2)
    EN 60730-2-4:2007 AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-4: PARTICULAR REQUIREMENTS FOR THERMAL MOTOR PROTECTORS FOR MOTOR-COMPRESSORS OF HERMETIC AND SEMI-HERMETIC TYPE
    CLC/TR 50480:2011 Determination of cross-sectional area of conductors and selection of protective devices
    EN 60439-5:2006 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 5: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR POWER DISTRIBUTION IN PUBLIC NETWORKS
    HD 60269-3:2010/A1:2013 LOW-VOLTAGE FUSES - PART 3: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD AND SIMILAR APPLICATIONS) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO F
    EN 61071:2007 Capacitors for power electronics
    HD 60269-2:2013 Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K
    EN 60974-6:2016 Arc welding equipment - Part 6: Limited duty equipment
    EN 50463:2007 Railway applications - Energy measurement on board trains
    EN 60269-2:1995/A2:2002 LOW-VOLTAGE FUSES - SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION)
    EN 50300:2004 Low-voltage switchgear and controlgear assemblies - General requirements for low-voltage substation cable distribution boards
    EN 62196-1:2014 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements
    BS 88-4(2007) : 2007 LOW-VOLTAGE FUSES - PART 4: SUPPLEMENTARY REQUIREMENTS FOR FUSE-LINKS FOR THE PROTECTION OF SEMICONDUCTOR DEVICES
    BS 88-4(2009) : 2009 + A2 2016 LOW-VOLTAGE FUSES - PART 4: SUPPLEMENTARY REQUIREMENTS FOR FUSE-LINKS FOR THE PROTECTION OF SEMICONDUCTOR DEVICES (IEC 60269-4:2009)

    Standards Referencing This Book - (Show below) - (Hide below)

    EN 60269-6:2011 Low-voltage fuses - Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems
    IEC 60038:2009 IEC standard voltages
    IEC 60228:2004 Conductors of insulated cables
    IEC 60269-4:2009+AMD1:2012+AMD2:2016 CSV Low-voltage fuses - Part 4: Supplementary requirements forfuse-links for the protection of semiconductor devices
    IEC 60269-6:2010 Low-voltage fuses - Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems
    IEC 60127:1974 Cartridge fuse-links for miniature fuses
    IEC 60050-441:1984 International Electrotechnical Vocabulary (IEV) - Part 441: Switchgear, controlgear and fuses
    IEC 60269-2:2013+AMD1:2016 CSV Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K
    ISO 3:1973 Preferred numbers Series of preferred numbers
    IEC 60695-2-11:2014 Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT)
    EN 60228:2005 COR 2005 CONDUCTORS OF INSULATED CABLES
    ISO 478:1974 Paper — Untrimmed stock sizes for the ISO-A Series — ISO primary range
    HD 472 S1:1989/AC:2013 NOMINAL VOLTAGES FOR LOW-VOLTAGE PUBLIC ELECTRICITY SUPPLY SYSTEMS
    IEC 60695-2-13:2010+AMD1:2014 CSV Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods- Glow-wire ignition temperature (GWIT) test method for materials
    EN 60695-2-13:2010/A1:2014 FIRE HAZARD TESTING - PART 2-13: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE IGNITION TEMPERATURE (GWIT) TEST METHOD FOR MATERIALS (IEC 60695-2-13:2010/A1:2014)
    EN 60269-4:2009/A2:2016 LOW-VOLTAGE FUSES - PART 4: SUPPLEMENTARY REQUIREMENTS FOR FUSE-LINKS FOR THE PROTECTION OF SEMICONDUCTOR DEVICES (IEC 60269-4:2009/A2:2016)
    IEC 60695-2-12:2010+AMD1:2014 CSV Fire hazard testing - Part 2-12: Glowing/hot-wire based test methods- Glow-wire flammability index (GWFI) test method for materials
    IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
    IEC 60269-3:2010+AMD1:2013 CSV Low-voltage fuses - Part 3: Supplementary requirements for fuses foruse by unskilled persons (fuses mainly for household or similar applications) - Examples of standardized systems of fuses A to F
    EN 60695-2-10:2013 Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure
    EN 60584-1:2013 Thermocouples - Part 1: EMF specifications and tolerances
    IEC 60364-3:1993 Electrical installations of buildings - Part 3: Assessment of general characteristics
    EN 60664-1:2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
    ISO 4046:1978 Paper, board, pulp and related terms — Vocabulary
    HD 60269-2:2013 Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K
    IEC 60947-3:2008+AMD1:2012+AMD2:2015 CSV Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
    ISO 593:1974 Paper Untrimmed stock sizes for the ISO-A Series ISO supplementary range
    EN 60529:1991/AC:2016-12 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
    HD 384.3 : 200S2 ELECTRICAL INSTALLATIONS OF BUILDINGS - ASSESSMENT OF GENERAL CHARACTERISTICS
    IEC 60695-2-10:2013 Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure
    EN 60695-2-12:2010/A1:2014 FIRE HAZARD TESTING - PART 2-12: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY INDEX (GWFI) TEST METHOD FOR MATERIALS (IEC 60695-2-12:2010/A1:2014)
    IEC 60664-1:2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
    IEC 60584-1:2013 Thermocouples - Part 1: EMF specifications and tolerances
    HD 60269-3:2010/A1:2013 LOW-VOLTAGE FUSES - PART 3: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD AND SIMILAR APPLICATIONS) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO F
    IEC 60364-5-52:2009 Low-voltage electrical installations - Part 5-52: Selection and erection of electrical equipment - Wiring systems
    EN 60695-2-11:2014 Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) (IEC 60695-2-11:2014)
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective