EN 60309-1:1999/A1:2007/AC:2014

Withdrawn

Withdrawn A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 1: GENERAL REQUIREMENTS (IEC 60309-1:1999/A2:2012)

Available format(s):

Withdrawn date: 10-12-2017

Language(s):

Published date: 12-01-2013

Publisher: European Committee for Standards - Electrical

Pure ENs are not available for sale, please purchase a suitable national adoption

Table of Contents - (Show below) - (Hide below)

FOREWORD
INTRODUCTION
1 Scope
2 Definitions
3 Normative references
4 General
5 Standard ratings
6 Classification
7 Marking
8 Dimensions
9 Protection against electric shock
10 Provision for earthing
11 Terminals and terminations
12 Interlocks
13 Resistance to ageing of rubber and thermoplastic
   material
14 General construction
15 Construction of socket-outlets
16 Construction of plugs and connectors
17 Construction of appliance inlets
18 Degrees of protection
19 Insulation resistance and dielectric strength
20 Breaking capacity
21 Normal operation
22 Temperature rise
23 Flexible cables and their connection
24 Mechanical strength
25 Screws, current-carrying parts and connections
26 Creepage distances, clearances and distances through
   sealing compound
27 Resistance to heat, fire and tracking
28 Corrosion and resistance to rusting
29 Conditional short-circuit current withstand test
30 Electromagnetic compatibility
Annex A (normative) - Guidance and description of test apparatus
Annex B (informative) - List of the clause numbers that require
        re-testing
Annex ZA (normative) - Normative references to international
         publications with their corresponding European
         publications
Annex ZB (normative) - References to AWG/MCM cables and/or
         non-European voltages which are excluded from this
         standard

Abstract - (Show below) - (Hide below)

Pertains to plugs and socket-outlets, cable couplers and appliance couplers, with a rated operating voltage not exceeding 1000 V d.c. or a.c. and 500 Hz a.c., and a rated current not exceeding 800 A, primarily intended for industrial use, either indoors or outdoors.

General Product Information - (Show below) - (Hide below)

Committee	BTWG 112-1
Document Type	Standard
ISBN
Pages
Published
Publisher	European Committee for Standards - Electrical
Status	Withdrawn

National Adoptions - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
OVE/ONORM EN 60309-1 : 2013 AC 1 2015	Identical
CEI EN 60309-1/A1:2008	Identical
I.S. EN 60309-1:1999	Identical
NBN EN 60309-1 : 1999 AMD 2/COR 15	Identical
PN EN 60309-1 : 2002 AC 1 2015	Identical
IEC 60309-1:1999+AMD1:2005+AMD2:2012 CSV	Identical
SN EN 60309-1 : 1999 AMD 11 2004	Identical
DIN EN 60309-1 : 2013 COR 1 2014	Identical
BS EN 60309-1 : 1999	Identical
NF EN 60309-1 : 1999 AMD 2 2013	Identical
UNE-EN 60309-1:2001	Identical
CEI EN 60309-1/A1/EC:2014	Identical
NEN EN IEC 60309-1 : 1999 AMD 1/C1 2014	Identical
VDE 0623-1 : 2013 COR 1 2014	Identical
IEC 60107-5:1992+AMD1:1999 CSV	Similar to
NEN 10309-1 : 1992	Similar to
NBN C 63 309-1 : 1992	Similar to

Standards Referenced By This Book - (Show below) - (Hide below)

I.S. EN 60335-1:2012	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS
09/30208429 DC : 0	BS EN 50467 - RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS
S.R. HD 60364-7-705:2007	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-705: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - AGRICULTURAL AND HORTICULTURAL PREMISES
UNE-HD 60364-7-722:2016	Low-voltage electrical installations - Part 7-722: Requirements for special installations or locations - Supplies for electric vehicles
I.S. EN 60252-1:2011	AC MOTOR CAPACITORS - PART 1: GENERAL - PERFORMANCE, TESTING AND RATING - SAFETY REQUIREMENTS - GUIDANCE FOR INSTALLATION AND OPERATION (IEC 60252-1:2010 (EQV))
HD 60364-7-708:2017	Low-voltage electrical installations - Part 7-708: Requirements for special installations or locations - Caravan parks, camping parks and similar locations
I.S. EN 50628:2016	ERECTION OF ELECTRICAL INSTALLATIONS IN UNDERGROUND MINES
BS EN 61029-1 : 2009	SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS
CEI EN 60092-507 : 2016	ELECTRICAL INSTALLATIONS IN SHIPS - PART 507: SMALL VESSELS
08/30186439 DC : DRAFT SEP 2008	BS EN 15869-2 - INLAND NAVIGATION VESSELS - ELECTRICAL SHORE CONNECTION, THREE-PHASE CURRENT 400 V, UP TO 32 A, 50 HZ - PART 2: ONSHORE UNIT, SAFETY REQUIREMENTS
BS EN 60092-507:2015	Electrical installations in ships Small vessels
UNE-EN 60252-1:2011	AC motor capacitors -- Part 1: General - Performance, testing and rating - Safety requirements - Guidance for installation and operation
UNE-EN 50467:2012	Railway applications - Rolling stock - Electrical connectors, requirements and test methods
I.S. EN 12649:2008	CONCRETE COMPACTORS AND SMOOTHING MACHINES - SAFETY
I.S. EN 60694:1999	COMMON SPECIFICATIONS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS
I.S. EN 50467:2011	RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS
BS EN 60252-1 : 2011	AC MOTOR CAPACITORS - PART 1: GENERAL - PERFORMANCE, TESTING AND RATING - SAFETY REQUIREMENTS - GUIDANCE FOR INSTALLATION AND OPERATION
I.S. EN 61851-1:2011	ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 1: GENERAL REQUIREMENTS
I.S. EN 60252-2:2011	AC MOTOR CAPACITORS - PART 2: MOTOR START CAPACITORS (IEC 60252-2:2010 (EQV))
S.R. HD 60364-7-709:2009	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-709: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - MARINAS AND SIMILAR LOCATIONS
I.S. HD 60364-7-705:2007	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - - PART 7-705: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - AGRICULTURAL AND HORTICULTURAL PREMISES (IEC 60364-7-705:2006 (MOD))
EN 60335-1:2012/A13:2017	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED)
BS EN 13718-1:2014	Medical vehicles and their equipment. Air ambulances Requirements for medical devices used in air ambulances
BS EN 61851-21:2002	Electric vehicle conductive charging system Electric vehicle requirements for conductive connection to an a.c./d.c. supply
BS EN 62477-1 : 2012	SAFETY REQUIREMENTS FOR POWER ELECTRONIC CONVERTER SYSTEMS AND EQUIPMENT - PART 1: GENERAL (IEC 62477-1:2012)
EN 60694:1996/A2:2001	COMMON SPECIFICATIONS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS
HD 60364-7-717:2010/AC:2014	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-717: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - MOBILE OR TRANSPORTABLE UNITS
EN 61851-1:2011	Electric vehicle conductive charging system - Part 1: General requirements
EN 60252-1 : 2011 AMD 1 2013	AC MOTOR CAPACITORS - PART 1: GENERAL - PERFORMANCE, TESTING AND RATING - SAFETY REQUIREMENTS - GUIDANCE FOR INSTALLATION AND OPERATION (IEC 60252-1:2010/A1:2013)
EN 60439-4:2004	Low-voltage switchgear and controlgear assemblies - Part 4: Particular requirements for assemblies for construction sites (ACS)
EN 12649:2008+A1:2011	Concrete compactors and smoothing machines - Safety
BS EN 50250 : 2002	CONVERSION ADAPTORS FOR INDUSTRIAL USE
CEI 13-32 : 2000	WATT-VAR-HOUR METERS FOR LOW-VOLTAGE THREE-PHASE NETWORKS (INTEGRATED UNITS) PRESETTED FOR PROCESSING AND REMOTE MANAGEMENT OF DATA WITH OR WITHOUT INSERTION OF CURRENT TRANSFORMERS
08/30186443 DC : DRAFT SEP 2008	BS EN 15869-3 - INLAND NAVIGATION VESSELS - ELECTRICAL SHORE CONNECTION, THREE-PHASE CURRENT 400 V, UP TO 32 A, 50 HZ - PART 3: ON-BOARD UNIT, SAFETY REQUIREMENTS
NF EN 15869-2 : 2010	INLAND NAVIGATION VESSELS - ELECTRICAL SHORE CONNECTION, THREE PHASE CURRENT 400 V, UP TO 63 A, 50 HZ - PART 2: ONSHORE UNIT, SAFETY REQUIREMENTS
BS EN 50091-1-2:1999	General and safety requirements for UPS used in restricted access locationsSpecification for uninterruptible power systems (UPS)
CEI EN 61316 : 2000	INDUSTRIAL CABLE REELS
BS EN 13976-1:2011	Rescue systems. Transportation of incubators Interface conditions
13/30276231 DC : 0	BS EN 13718-1 - MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES
15/30317827 DC : 0	BS EN 16840 - INLAND NAVIGATION VESSELS - ELECTRICAL SHORE CONNECTION, THREEPHASE CURRENT 400 V, 50 HZ AND AT LEAST 250 A
CEI EN 50467 : 2013	RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS
I.S. EN 62852:2015	CONNECTORS FOR DC-APPLICATION IN PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS
HD 60364-7-704:2018	Low voltage electrical installations - Part 7-704: Requirements for special installations or locations - Construction and demolition site installations
BS EN 61316:2000	Industrial cable reels
PREN 50467 : DRAFT 2009	RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS
S.R. HD 60364-7-708:2017	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-708: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - CARAVAN PARKS, CAMPING PARKS AND SIMILAR LOCATIONS
S.R. HD 60364-7-730:2015	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-730: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - ONSHORE UNITS OF ELECTRICAL SHORE CONNECTIONS FOR INLAND NAVIGATION VESSELS
I.S. EN 50156-1:2015	ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 1: REQUIREMENTS FOR APPLICATION DESIGN AND INSTALLATION
BS EN 62196-1:2014	Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles General requirements
CEI R069-001 : 2004	AC CONNECTION DEVICES FOR ELECTRIC VEHICLE CONDUCTIVE CHARGING
DIN EN 15869-3:2010-06	INLAND NAVIGATION VESSELS - ELECTRICAL SHORE CONNECTION, THREE PHASE CURRENT 400 V, UP TO 63 A, 50 HZ - PART 3: ON-BOARD UNIT, SAFETY REQUIREMENTS
VDE 0623-100 : 2000-09	INDUSTRIAL CABLE REELS
EN 13976-1:2011	Rescue systems - Transportation of incubators - Part 1: Interface conditions
I.S. EN 60204-32:2008	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 32: REQUIREMENTS FOR HOISTING MACHINES
S.R. CLC/TS 50457-1:2008	CONDUCTIVE CHARGING FOR ELECTRIC VEHICLES - PART 1: D.C. CHARGING STATION
UNE-EN 15869-2:2011	Inland navigation vessels - Electrical shore connection, three phase current 400 V, up to 63 A, 50 Hz - Part 2: Onshore unit, safety requirements
DIN EN 15869-2:2010-06	INLAND NAVIGATION VESSELS - ELECTRICAL SHORE CONNECTION, THREE PHASE CURRENT 400 V, UP TO 63 A, 50 HZ - PART 2: ONSHORE UNIT, SAFETY REQUIREMENTS
DIN EN 61316 : 2000-09	INDUSTRIAL CABLE REELS
UNI EN 13718-1 : 2014	MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES
VDE 0220-3 : 1977	SPECIFICATION FOR SINGLE AND MULTIPLE CABLE CLAMPS WITH INSULATING PARTS IN ELECTRICAL POWER CABLE INSTALLATIONS UP TO 1000 V
VDI/BV-BS 6206 Blatt 2:2016-11	Buildings constructed with reusable pre-assembled room units in steel frame construction - Transport and construction
HD 60364-7-709:2009/A11:2017	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-709: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - MARINAS AND SIMILAR LOCATIONS
EN 61851-21:2002	Electric vehicle conductive charging system - Part 21: Electric vehicle requirements for conductive connection to an a.c/d.c. supply
DD CLC/TS 50467:2008	Railway applications. Rolling stock. Electrical connectors, requirements and test methods
09/30205924 DC : 0	BS EN 13976-1 - RESCUE SYSTEMS - TRANSPORTATION OF INCUBATORS - PART 1: INTERFACE CONDITIONS
NF EN 61029-1 : 2009 AMD 11 2011	SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS
HD 60364-7-705:2007/A12:2017	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-705: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - AGRICULTURAL AND HORTICULTURAL PREMISES
I.S. EN 50091-1-2:2003
I.S. EN 62752:2016&AC:2019-03	IN-CABLE CONTROL AND PROTECTION DEVICE FOR MODE 2 CHARGING OF ELECTRIC ROAD VEHICLES (IC-CPD)
BS EN 60335-1 : 2012	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED)
I.S. HD 60364-7-704:2007	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-704: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - CONSTRUCTION AND DEMOLITION SITE INSTALLATIONS
CLC/TS 50457-1:2008	Conductive charging for electric vehicles - Part 1: D.C. charging station
BS EN 15869-3:2010	Inland navigation vessels. Electrical shore connection, three phase current 400 V, up to 63 A, 50 Hz On-board unit, safety requirements
UNE-EN 13976-1:2011	Rescue systems - Transportation of incubators - Part 1: Interface conditions
I.S. HD 60364-7-717:2010	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-717: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - MOBILE OR TRANSPORTABLE UNITS
S.R. HD 60364-7-722:2016	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-722: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - SUPPLIES FOR ELECTRIC VEHICLES
I.S. EN 60204-1:2006	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
DIN EN 12649:2011-09	Concrete compactors and smoothing machines - Safety
DIN EN 13718-1:2014-12	MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES
BS EN 12649 : 2008	CONCRETE COMPACTORS AND SMOOTHING MACHINES - SAFETY
UNE-EN 50521:2010	Connectors for photovoltaic systems - Safety requirements and tests
UNE-EN 60204-1:2007	Safety of machinery - Electrical equipment of machines - Part 1: General requirements
UNI EN 12649 : 2011	CONCRETE COMPACTORS AND SMOOTHING MACHINES - SAFETY
UNI EN 15869-2 : 2010	INLAND NAVIGATION VESSELS - ELECTRICAL SHORE CONNECTION, THREE-PHASE CURRENT 400 V, UP TO 63 A, 50 HZ - PART 2: ONSHORE UNIT, SAFETY REQUIREMENTS
BS EN 60694:1997	Common specifications for high-voltage switchgear and controlgear standards
I.S. HD 60364-7-708:2009	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-708: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - CARAVAN PARKS, CAMPING PARKS AND SIMILAR LOCATIONS
97/703042 DC : DRAFT FEB 1997	PREN 50275-1 - CONDUCTIVE CHARGING FOR ELECTRIC VEHICLES - PART 1: GENERAL CONSIDERATIONS
I.S. EN 15869-3:2010	INLAND NAVIGATION VESSELS - ELECTRICAL SHORE CONNECTION, THREE PHASE CURRENT 400 V, UP TO 63 A, 50 HZ - PART 3: ON-BOARD UNIT, SAFETY REQUIREMENTS
14/30316181 DC : 0	BS EN 50628 - ERECTION OF ELECTRICAL INSTALLATIONS IN UNDERGROUND MINES
BS EN 60252-2 : 2011	AC MOTOR CAPACITORS - PART 2: MOTOR START CAPACITORS
DD CLC/TS 50457-1:2008	Conductive charging for electric vehicles D.C. charging station
I.S. EN 50521:2008	CONNECTORS FOR PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS
I.S. EN 15869-2:2010	INLAND NAVIGATION VESSELS - ELECTRICAL SHORE CONNECTION, THREE PHASE CURRENT 400 V, UP TO 63 A, 50 HZ - PART 2: ONSHORE UNIT, SAFETY REQUIREMENTS
I.S. EN 61984:2009	CONNECTORS - SAFETY REQUIREMENTS AND TESTS
I.S. EN 62368-1:2014	AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED)
HD 60364-7-722:2016	Low-voltage electrical installations - Part 7-722: Requirements for special installations or locations - Supplies for electric vehicles
I.S. EN 60439-4:2004	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 4: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR CONSTRUCTION SITES (ACS)
EN 60204-1 : 2006 COR 2010	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
I.S. EN 60092-507:2015	ELECTRICAL INSTALLATIONS IN SHIPS - PART 507: SMALL VESSELS
S.R. CLC/TS 50467:2008	RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS
PREN 50628 : DRAFT 2014	ERECTION OF ELECTRICAL INSTALLATIONS IN UNDERGROUND MINES
EN 62368-1:2014/AC:2017-03	AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED)
UNI EN 13976-1 : 2011	RESCUE SYSTEMS - TRANSPORTATION OF INCUBATORS - PART 1: INTERFACE CONDITIONS
I.S. HD 60364-7-740:2006	ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 7-740: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - TEMPORARY ELECTRICAL INSTALLATIONS FOR STRUCTURES, AMUSEMENT DEVICES AND BOOTHS AT FAIRGROUNDS, AMUSEMENT PARKS AND CIRCUSES
BS EN 50628:2016	Erection of electrical installations in underground mines
BS EN 15869-2:2010	Inland navigation vessels. Electrical shore connection, three phase current 400 V, up to 63 A, 50 Hz Onshore unit, safety requirements
BS EN 61851-1:2011	Electric vehicle conductive charging system General requirements
BS EN 60439-4:2004	Low-voltage switchgear and controlgear assemblies Particular requirements for assemblies for construction sites (ACS)
EN 62852:2015	Connectors for DC-application in photovoltaic systems - Safety requirements and tests
UNE-EN 12649:2009	Concrete compactors and smoothing machines - Safety
EN 62752:2016	In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD)
EN 13718-1:2014	Medical vehicles and their equipment - Air ambulances - Part 1: Requirements for medical devices used in air ambulances
I.S. EN 13718-1:2014	MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES
EN 60092-507:2015/AC:2015	ELECTRICAL INSTALLATIONS IN SHIPS - PART 507: SMALL VESSELS
BS EN 50521 : 2009	CONNECTORS FOR PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS
BS EN 50156-1:2015	Electrical equipment for furnaces and ancillary equipment Requirements for application design and installation
08/30179116 DC : DRAFT MAR 2008	BS EN 50521 - CONNECTORS FOR PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS
12/30260546 DC : 0	BS EN 50156-1 - ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 1: REQUIREMENTS FOR APPLICATION DESIGN AND INSTALLATION
UNE-EN 60335-1:2012	Household and similar electrical appliances - Safety - Part 1: General requirements
DIN EN 13976-1 E : 2011	RESCUE SYSTEMS - TRANSPORTATION OF INCUBATORS - PART 1: INTERFACE CONDITIONS
EN 62196-1:2014	Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements
CLC/TS 50467 : 2008 COR 2008	RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS
EN 15869-2:2010	Inland navigation vessels - Electrical shore connection, three phase current 400 V, up to 63 A, 50 Hz - Part 2: Onshore unit, safety requirements
EN 15869-3:2010	Inland navigation vessels - Electrical shore connection, three phase current 400 V, up to 63 A, 50 Hz - Part 3: On-board unit, safety requirements
NF EN 61316 : 2000	INDUSTRIAL CABLE REELS
UNE-HD 60364-7-709:2011	Low-voltage electrical installations -- Part 7-709: Requirements for special installations or locations - Marinas and similar locations
CEI EN 62752 : 1ED 2017	IN-CABLE CONTROL AND PROTECTION DEVICE FOR MODE 2 CHARGING OF ELECTRIC ROAD VEHICLES (IC-CPD)
BS EN 50467:2011	Railway applications. Rolling stock. Electrical connectors, requirements and test methods
BS EN 50066:1993	Specification for mini-couplers for the interconnection of electrical mains supplied equipment in road vehicles
NF EN 12649 : 2008 + A1 2011	CONCRETE COMPACTORS AND SMOOTHING MACHINES - SAFETY
UNE-EN 15869-3:2011	Inland navigation vessels - Electrical shore connection, three phase current 400 V, up to 63 A, 50 Hz - Part 3: On-board unit, safety requirements
NF EN 15869-3 : 2010	INLAND NAVIGATION VESSELS - ELECTRICAL SHORE CONNECTION THREE PHASE CURRENT 400 V, UP TO 63 A, 50 HZ - PART 3: ON-BOARD UNIT, SAFETY REQUIREMENTS
I.S. HD 60364-7-709:2009	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-709: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - MARINAS AND SIMILAR LOCATIONS (IEC 60364-7-709:2007 (MOD))
UNE-HD 60364-7-708:2018	Low-voltage electrical installations - Part 7-708: Requirements for special installations or locations - Caravan parks, camping parks and similar locations
S.R. HD 60364-7-740:2006	ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 7-740: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - TEMPORARY ELECTRICAL INSTALLATIONS FOR STRUCTURES, AMUSEMENT DEVICES AND BOOTHS AT FAIRGROUNDS, AMUSEMENT PARKS AND CIRCUSES
I.S. EN 61029-1:2009	SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS
S.R. HD 60364-7-704:2007	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-704: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - CONSTRUCTION AND DEMOLITION SITE INSTALLATIONS
UNI EN 15869-3 : 2010	INLAND NAVIGATION VESSELS - ELECTRICAL SHORE CONNECTION, THREE-PHASE CURRENT 400 V, UP TO 63 A, 50 HZ - PART 3: ON-BOARD UNIT, SAFETY REQUIREMENTS
DIN EN 13976-1:2016-03 (Draft)	RESCUE SYSTEMS - TRANSPORTATION OF INCUBATORS - PART 1: INTERFACE CONDITIONS
UNE-EN 62852:2015	Connectors for DC-application in photovoltaic systems - Safety requirements and tests
I.S. EN 13976-1:2011	RESCUE SYSTEMS - TRANSPORTATION OF INCUBATORS - PART 1: INTERFACE CONDITIONS
I.S. EN 50250:2002	CONVERSION ADAPTERS FOR INDUSTRIAL USE
EN 62477-1:2012/A1:2017	SAFETY REQUIREMENTS FOR POWER ELECTRONIC CONVERTER SYSTEMS AND EQUIPMENT - PART 1: GENERAL (IEC 62477-1:2012/A1:2016)
UNE-HD 60364-7-730:2016	Low-voltage electrical installations - Part 7-730: Requirements for special installations or locations - Onshore units of electrical shore connections for inland navigation vessels
BS EN 60204-1 : 2006	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
BS EN 60204-32:2008	Safety of machinery. Electrical equipment of machines Requirements for hoisting machines
BS EN 61984:2009	Connectors. Safety requirements and tests
EN 50250 : 2002 AMD 1 2015	CONVERSION ADAPTERS FOR INDUSTRIAL USE
EN 50521:2008/A1:2012	CONNECTORS FOR PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS
EN 61029-1:2009/A11:2010	SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS
EN 61984:2009	Connectors - Safety requirements and tests
DIN EN 13976-1:2011-08	RESCUE SYSTEMS - TRANSPORTATION OF INCUBATORS - PART 1: INTERFACE CONDITIONS
EN 50156-1:2015	Electrical equipment for furnaces and ancillary equipment - Part 1: Requirements for application design and installation
HD 60364-7-740:2006/A11:2017	ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 7-740: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - TEMPORARY ELECTRICAL INSTALLATIONS FOR STRUCTURES, AMUSEMENT DEVICES AND BOOTHS AT FAIRGROUNDS, AMUSEMENT PARKS AND CIRCUSES
EN 60252-2 : 2011 AMD 1 2013	AC MOTOR CAPACITORS - PART 2: MOTOR START CAPACITORS (IEC 60252-2:2010/A1:2013)
EN 60204-32:2008	Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
HD 60364-7-730:2015	Low-voltage electrical installations - Part 7-730: Requirements for special installations or locations - Onshore units of electrical shore connections for inland navigation vessels
EN 50628:2016	Erection of electrical installations in underground mines
EN 50091-1-2 : 98 COR 1 99
EN 50467 : 2011	RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS
UNE-HD 60364-7-717:2013	Low-voltage electrical installations -- Part 7-717: Requirements for special installations or locations - Mobile or transportable units

Standards Referencing This Book - (Show below) - (Hide below)

IEC 60112:2003+AMD1:2009 CSV	Method for the determination of the proof and the comparative tracking indices of solid insulating materials
IEC 60228:2004	Conductors of insulated cables
HD 214 : 200S2	RECOMMENDED METHOD FOR DETERMINING THE COMPARATIVE TRACKING INDEX OF SOLID INSULATING MATERIALS UNDER MOIST CONDITIONS
IEC 60309-4:2006+AMD1:2012 CSV	Plugs, socket-outlets and couplers for industrial purposes - Part 4: Switched socket-outlets and connectors with or without interlock
EN 60695-10-2:2014	Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method
EN 60309-4:2007/A1:2012	PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 4: SWITCHED SOCKET-OUTLETS AND CONNECTORS WITH OR WITHOUT INTERLOCK (IEC 60309-4:2006/A1:2012)
IEC 60050-441:1984	International Electrotechnical Vocabulary (IEV) - Part 441: Switchgear, controlgear and fuses
HD 625.1 : 200S1	INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PRINCIPLES, REQUIREMENTS AND TESTS
IEC 60269-2:2013+AMD1:2016 CSV	Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K
IEC 60695-2-11:2014	Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT)
IEC 60269-1:2006+AMD1:2009+AMD2:2014 CSV	Low-voltage fuses - Part 1: General requirements
ISO 2081:2008	Metallic and other inorganic coatings Electroplated coatings of zinc with supplementary treatments on iron or steel
HD 22-4 : 200S4	CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V AND HAVING CROSS-LINKED INSULATION - PART 4: CORDS AND FLEXIBLE CABLES
ISO 1456:2009	Metallic and other inorganic coatings — Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium
EN 60947-3:2009/A2:2015	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 3: SWITCHES, DISCONNECTORS, SWITCH-DISCONNECTORS AND FUSE-COMBINATION UNITS (IEC 60947-3:2008/A2:2015)
HD 383 : S2 AMD 2	CONDUCTORS OF INSULATED CABLES - GUIDE TO THE DIMENSIONAL LIMITS OF CIRCULAR CONDUCTORS
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV	Degrees of protection provided by enclosures (IP Code)
IEC 60245-4:2011	Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 4: Cords and flexible cables
ISO 2093:1986	Electroplated coatings of tin — Specification and test methods
EN 60269-2:1995/A2:2002	LOW-VOLTAGE FUSES - SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION)
IEC 60947-3:2008+AMD1:2012+AMD2:2015 CSV	Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
IEC 60695-10-2:2014	Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method
EN 60529:1991/AC:2016-12	DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
IEC 60664-1:2007	Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
EN 60695-2-11:2014	Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) (IEC 60695-2-11:2014)
EN 60269-1:2007/A2:2014	LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS (IEC 60269-1:2006/A2:2014)

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Sorry this product is not available in your region.

Add To Cart