PREN 13830 : DRAFT 2013
|
CURTAIN WALLING - PRODUCT STANDARD |
I.S. EN 12354-2:2000
|
BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDINGS FROM THE PERFORMANCE OF ELEMENTS - PART 2: IMPACT SOUND INSULATION BETWEEN ROOMS |
04/30081109 DC : DRAFT JUN 2004
|
BS EN ISO 140-16 - ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 16: LABORATORY MEASUREMENT OF THE SOUND REDUCTION INDEX IMPROVEMENT BY ADDITIONAL LINING |
15/30328765 DC : 0
|
BS EN 12602 - PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE |
I.S. EN 12354-3:2000
|
BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDINGS FROM THE PERFORMANCE OF ELEMENTS - PART 3: AIRBORNE SOUND INSULATION AGAINST OUTDOOR SOUND |
16/30334502 DC : 0
|
BS EN ISO 12354-3 - BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDINGS FROM THE PERFORMANCE OF ELEMENTS - PART 3: AIRBORNE SOUND INSULATION AGAINST OUTDOOR SOUND |
01/560801 DC : DRAFT FEB 2001
|
BS EN ISO 10848-2 - ACOUSTICS - LABORATORY MEASUREMENT OF THE FLANKING TRANSMISSION OF AIRBORNE AND IMPACT NOISE BETWEEN ADJOINING ROOMS - PART 2: APPLICATION TO LIGHT ELEMENTS WHEN THE JUNCTION HAS A SMALL INFLUENCE |
11/30251985 DC : 0
|
BS EN 13950 - GYPSUM PLASTERBOARD THERMAL/ACOUSTIC INSULATION COMPOSITE PANELS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
08/30171552 DC : DRAFT JAN 2008
|
BS EN 13279-1 - GYPSUM BINDERS AND GYPSUM PLASTERS - PART 1: DEFINITIONS AND REQUIREMENTS |
07/30166420 DC : DRAFT AUG 2007
|
BS EN 1520 - PREFABRICATED REINFORCED COMPONENTS OF LIGHTWEIGHT AGGREGATE CONCRETE WITH OPEN STRUCTURE |
PD CEN/TR 15226:2006
|
Building products. Treatment of acoustics in product technical specifications |
DIN EN 14963 E : 2006
|
ROOF COVERINGS - CONTINUOUS ROOFLIGHTS OF PLASTICS WITH OR WITHOUT UPSTANDS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS |
05/30135872 DC : 0
|
EN 15283-2 - GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 2: GYPSUM FIBRE BOARDS |
10/30234552 DC : 0
|
BS EN 16205 - LABORATORY MEASUREMENT OF WALKING NOISE ON FLOORS |
PD CEN/TR 14788:2006
|
Ventilation for buildings. Design and dimensioning of residential ventilation systems |
UNI EN 15657-1 : 2009
|
ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF AIRBORNE AND STRUCTURE BORNE SOUND FROM BUILDING EQUIPMENT - PART 1: SIMPLIFIED CASES WHERE THE EQUIPMENT MOBILITIES ARE MUCH HIGHER THAN THE RECEIVER MOBILITIES, TAKING WHIRLPOOL BATHS AS AN EXAMPLE |
ISO 15712-3:2005
|
Building acoustics Estimation of acoustic performance of buildings from the performance of elements Part 3: Airborne sound insulation against outdoor sound |
I.S. EN 15657-1:2009
|
ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF AIRBORNE AND STRUCTURE BORNE SOUND FROM BUILDING EQUIPMENT - PART 1: SIMPLIFIED CASES WHERE THE EQUIPMENT MOBILITIES ARE MUCH HIGHER THAN THE RECEIVER MOBILITIES, TAKING WIRLPOOL BATHS AS AN EXAMPLE |
PREN 12602 : DRAFT 2015
|
PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE |
I.S. CEN/TR 15226:2006
|
BUILDING PRODUCTS - TREATMENT OF ACOUSTICS IN PRODUCT TECHNICAL SPECIFICATIONS |
I.S. EN 14963:2006
|
ROOF COVERINGS - CONTINUOUS ROOFLIGHTS OF PLASTICS WITH OR WITHOUT UPSTANDS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS |
DIN EN 14964 E : 2007
|
RIGID UNDERLAYS FOR DISCONTINUOUS ROOFING - DEFINITIONS AND CHARACTERISTICS |
DIN EN 14366 E : 2005
|
LABORATORY MEASUREMENT OF NOISE FROM WASTE WATER INSTALLATIONS |
BS EN ISO 15186-1:2003
|
Acoustics. Measurement of sound insulation in buildings and of building elements using sound intensity Laboratory measurements |
BS EN 13141-2:2010
|
Ventilation for buildings. Performance testing of components/products for residential ventilation Exhaust and supply air terminal devices |
BS EN 438-7:2005
|
High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates) Compact laminate and HPL composite panels for internal and external wall and ceiling finishes |
UNE-EN 16703:2015
|
Acoustics - Test code for drywall systems of plasterboard with steel studs - Airborne sound insulation |
BS EN 520 : 2004
|
GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
DIN EN 13815:2006-12
|
Fibrous gypsum plaster casts - Definitions, requirements and test methods |
DIN EN 13241-1:2004-04
|
INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - PRODUCT STANDARD - PART 1: PRODUCTS WITHOUT FIRE RESISTANCE OR SMOKE CONTROL CHARACTERISTICS |
EN 12860:2001/AC:2002
|
GYPSUM BASED ADHESIVES FOR GYPSUM BLOCKS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
EN 13141-2:2010
|
Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 2: Exhaust and supply air terminal devices |
EN 12781:2001
|
Wallcoverings - Specification for cork panels |
EN 12354-3:2000
|
Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 3: Airborne sound insulation against outdoor sound |
CEN/TR 14788:2006
|
Ventilation for buildings - Design and dimensioning of residential ventilation systems |
EN 12354-1:2000
|
Building Acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 1: Airborne sound insulation between rooms |
CEN/TR 15226:2006
|
Building products - Treatment of acoustics in product technical specifications |
EN 13241:2003+A2:2016
|
Industrial, commercial, garage doors and gates - Product standard, performance characteristics |
BS EN 15283-1 : 2008
|
GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 1: GYPSUM BOARDS WITH MAT REINFORCEMENT |
13/30266550 DC : 0
|
BS EN 14509 - SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS |
10/30218654 DC : 0
|
BS EN 12859 - GYPSUM BLOCKS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
10/30218979 DC : DRAFT JUNE 2010
|
BS EN 1793-2 - ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 2: INTRINSIC CHARACTERISTICS OF AIRBORNE SOUND INSULATION UNDER DIFFUSE SOUND FIELD CONDITIONS |
DIN EN 15283-2:2009-12
|
Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 2: Gypsum fibre boards (includes Amendment A1:2009) |
DIN EN 15283-1:2009-12
|
Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 1: Gypsum boards with mat reinforcement (includes Amendment A1:2009) |
02/105004 DC : DRAFT JULY 2002
|
PREN 14509 - SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING SANDWICH PANELS - FACTORY MADE PRODUCTS - SPECIFICATION |
UNI EN 15283-1 : 2009
|
GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 1: GYPSUM BOARDS WITH MAT REINFORCEMENT |
PREN 14351-2 : DRAFT 2014
|
WINDOWS AND DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PART 2: INTERNAL PEDESTRIAN DOORSETS WITHOUT RESISTANCE TO FIRE AND /OR SMOKE LEAKAGE CHARACTERISTICS |
13/30281348 DC : 0
|
BS EN 13830 - CURTAIN WALLING - PRODUCT STANDARD |
10/30218985 DC : DRAFT JUNE 2010
|
BS EN 13369 - COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
00/565268 DC : DRAFT NOV 2000
|
BS EN ISO 10052 - ACOUSTICS - FIELD MEASUREMENTS OF AIRBORNE AND IMPACT SOUND INSULATION AND OF EQUIPMENT SOUND - SURVEY METHOD |
08/30175518 DC : DRAFT SEP 2008
|
BS EN 13141-2 - VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 2: EXHAUST AND SUPPLY AIR TERMINAL DEVICES |
02/121752 DC : DRAFT APR 2002
|
PREN 438-7 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 7: COMPACT LAMINATE AND HPL COMPOSITE PANELS FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES |
08/30178840 DC : DRAFT AUG 2008
|
BS EN 15037-3 - PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 3: CLAY BLOCKS |
01/101336 DC : DRAFT JAN 2001
|
PREN 13964 - SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
ISO 15712-4:2005
|
Building acoustics Estimation of acoustic performance of buildings from the performance of elements Part 4: Transmission of indoor sound to the outside |
DIN EN 13279-1:2008-11
|
GYPSUM BINDERS AND GYPSUM PLASTERS - PART 1: DEFINITIONS AND REQUIREMENTS |
DIN EN 1520:2011-06
|
Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement |
DIN EN 14366:2005-02
|
LABORATORY MEASUREMENT OF NOISE FROM WASTE WATER INSTALLATIONS |
DIN EN 14964:2007-01
|
RIGID UNDERLAYS FOR DISCONTINUOUS ROOFING - DEFINITIONS AND CHARACTERISTICS |
DIN EN 13986:2015-06
|
WOOD-BASED PANELS FOR USE IN CONSTRUCTION - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
DIN EN 14246:2006-09
|
Gypsum elements for suspended ceilings - Definitions, requirements and test methods |
DIN EN 15318:2008-01
|
Design and application of gypsum blocks |
BS EN 13241-1 : 2003
|
INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - PRODUCT STANDARD - PART 1: PRODUCTS WITHOUT FIRE RESISTANCE OR SMOKE CONTROL CHARACTERISTICS |
BS EN 14964:2006
|
Rigid underlays for discontinuous roofing. Definitions and characteristics |
I.S. EN 14351-1:2006
|
WINDOWS AND DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PART 1: WINDOWS AND EXTERNAL PEDESTRIAN DOORSETS WITHOUT RESISTANCE TO FIRE AND/OR SMOKE LEAKAGE CHARACTERISTICS |
I.S. EN 1520:2011
|
PREFABRICATED REINFORCED COMPONENTS OF LIGHTWEIGHT AGGREGATE CONCRETE WITH OPEN STRUCTURE WITH STRUCTURAL OR NON-STRUCTURAL REINFORCEMENT |
DIN EN 13141-2:2010-12
|
Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 2: Exhaust and supply air terminal devices |
I.S. EN 13986:2004
|
WOOD-BASED PANELS FOR USE IN CONSTRUCTION - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
I.S. EN 520:2005
|
GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
I.S. EN 13141-2:2010
|
VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 2: EXHAUST AND SUPPLY AIR TERMINAL DEVICES |
I.S. EN 12781:2001
|
WALLCOVERINGS - SPECIFICATION FOR CORK PANELS |
I.S. EN ISO 12017:1997
|
PLASTICS - POLY(METHYL METHACRYLATE) DOUBLE- AND TRIPLE-SKIN SHEETS - TEST METHODS |
DIN EN 15657-1:2009-10
|
ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF AIRBORNE AND STRUCTURE BORNE SOUND FROM BUILDING EQUIPMENT - PART 1: SIMPLIFIED CASES WHERE THE EQUIPMENT MOBILITIES ARE MUCH HIGHER THAN THE RECEIVER MOBILITIES, TAKING WIRLPOOL BATHS AS AN EXAMPLE |
BS EN 15657-1:2009
|
Acoustic properties of building elements and of buildings. Laboratory measurement of airborne and structure borne sound from building equipment Simplified cases where the equipment mobilities are much higher than the receiver mobilities, taking whirlpool baths as an example |
I.S. EN ISO 140-12:2000
|
ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 12: LABORATORY MEASUREMENT OF ROOM-TO-ROOM AIRBORNE AND IMPACT SOUND INSULATION OF AN ACCESS FLOOR |
14/30293183 DC : 0
|
BS EN 16703 - ACOUSTICS - TEST CODE FOR DRYWALL SYSTEMS OF PLASTERBOARD WITH STEEL STUDS - AIRBORNE SOUND INSULATION |
11/30253413 DC : 0
|
BS EN 16361 - POWER OPERATED PEDESTRIAN DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PEDESTRIAN DOOR SETS, OTHER THAN SWING TYPE, INITIALLY DESIGNED FOR INSTALLATION WITH POWER OPERATION WITHOUT RESISTANCE TO FIRE AND SMOKE LEAKAGE CHARACTERISTICS |
BS EN 16703:2015
|
Acoustics. Test code for drywall systems of plasterboard with steel studs. Airborne sound insulation |
DIN EN 15498 E : 2008
|
PRECAST CONCRETE PRODUCTS - WOOD-CHIP CONCRETE SHUTTERING BLOCKS - PRODUCT PROPERTIES AND PERFORMANCE |
UNI EN 15283-2 : 2009
|
GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 2: GYPSUM FIBRE BOARDS |
DIN EN 15498:2008-08
|
PRECAST CONCRETE PRODUCTS - WOOD-CHIP CONCRETE SHUTTERING BLOCKS - PRODUCT PROPERTIES AND PERFORMANCE |
I.S. EN 15283-1:2008
|
GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 1: GYPSUM BOARDS WITH MAT REINFORCEMENT |
01/105976 DC : DRAFT JULY 2001
|
PREN 14246 - GYPSUM ELEMENTS FOR SUSPENDED CEILINGS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
05/30138009 DC : DRAFT AUG 2005
|
EN 15319 - GENERAL PRINCIPLES OF DESIGN OF FIBROUS (GYPSUM) PLASTER WORKS |
02/560743 DC : DRAFT FEB 2002
|
BS EN 14366 - LABORATORY MEASUREMENT OF NOISE FROM WASTE WATER INSTALLATIONS |
BS EN 13241 : 2003
|
INDUSTRIAL, COMMERCIAL, GARAGE DOORS AND GATES - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS |
DIN EN 14963:2006-12
|
Roof coverings - Continuous rooflights of plastics with or without upstands - Classification, requirements and test methods |
BS EN 15498:2008
|
Precast concrete products. Wood-chip concrete shuttering blocks. Product properties and performance |
DIN EN 16703 E : 2015
|
ACOUSTICS - TEST CODE FOR DRYWALL SYSTEMS OF PLASTERBOARD WITH STEEL STUDS - AIRBORNE SOUND INSULATION |
PREN 14190 : DRAFT 2011
|
GYPSUM PLASTERBOARD PRODUCTS FROM PROCESSING - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
PREN 14509 : DRAFT 2013
|
SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS |
UNI EN 15498 : 2008
|
PRECAST CONCRETE PRODUCTS - WOOD-CHIP CONCRETE SHUTTERING BLOCKS - PRODUCT PROPERTIES AND PERFORMANCE |
PREN 13950 : DRAFT 2011
|
GYPSUM BOARD THERMAL/ACOUSTIC INSULATION COMPOSITE PANELS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
I.S. EN 15498:2008
|
PRECAST CONCRETE PRODUCTS - WOOD-CHIP CONCRETE SHUTTERING BLOCKS - PRODUCT PROPERTIES AND PERFORMANCE |
DIN EN 438-7:2005-04
|
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes; German version EN 438-7:2005 |
DIN EN 14759 E : 2005
|
SHUTTERS - ACOUSTIC INSULATION RELATIVE TO AIRBORNE SOUND - EXPRESSION OF PERFORMANCE |
DIN EN 15319 E : 2007
|
GENERAL PRINCIPLES OF DESIGN OF FIBROUS (GYPSUM) PLASTER WORKS |
BS EN 1520:2011
|
Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement |
UNE-EN 13141-2:2011
|
Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 2: Exhaust and supply air terminal devices |
EN 14964:2006
|
Rigid underlays for discontinuous roofing - Definitions and characteristics |
EN 13986:2004
|
Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
I.S. EN 14366:2005
|
LABORATORY MEASUREMENT OF NOISE FROM WASTE WATER INSTALLATIONS |
UNE-EN 13241-1:2004
|
Industrial, commercial and garage doors and gates - Product standard - Part 1: Products without fire resistance or smoke control characteristics |
DIN EN 13241-1:2011-06
|
INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - PRODUCT STANDARD - PART 1: PRODUCTS WITHOUT FIRE RESISTANCE OR SMOKE CONTROL CHARACTERISTICS |
EN 13986:2004+A1:2015
|
Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
EN 15283-1:2008+A1:2009
|
Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 1: Gypsum boards with mat reinforcement |
EN ISO 15186-1 : 2003
|
Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Part 1: Laboratory measurements (ISO 15186-1:2000) |
UNI EN 13241-1 : 2011
|
INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - PRODUCT STANDARD - PART 1: PRODUCTS WITHOUT FIRE RESISTANCE OR SMOKE CONTROL CHARACTERISTICS |
UNI EN 520 : 2009
|
GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
UNI EN 13141-2 : 2010
|
VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 2: EXHAUST AND SUPPLY AIR TERMINAL DEVICES |
UNI EN 1520 : 2011
|
Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non- structural reinforcement |
UNI EN 14246 : 2006
|
GYPSUM ELEMENTS FOR SUSPENDED CEILINGS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
UNI EN 13279-1 : 2008
|
GYPSUM BINDERS AND GYPSUM PLASTERS - PART 1: DEFINITIONS AND REQUIREMENTS |
DIN EN 16703:2015-12
|
ACOUSTICS - TEST CODE FOR DRYWALL SYSTEMS OF PLASTERBOARD WITH STEEL STUDS - AIRBORNE SOUND INSULATION |
00/105211 DC : DRAFT JULY 2000
|
PREN 13950 - GYPSUM PLASTERBOARD THERMAL/ACOUSTIC INSULATION COMPOSITE PANELS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
98/106350 DC : DRAFT JULY 1998
|
PREN 13279-1 - GYPSUM AND GYPSUM BASED BUILDING PLASTER - PART 1: DEFINITIONS AND REQUIREMENTS |
08/30017005 DC : 0
|
BS EN ISO 10848-4 - ACOUSTICS - LABORATORY MEASUREMENT OF THE FLANKING TRANSMISSION OF AIRBORNE AND IMPACT NOISE BETWEEN ADJOINING ROOMS - PART 4: ALL OTHER CASES |
I.S. EN 12354-4:2000
|
BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDINGS FROM THE PERFORMANCE OF ELEMENTS - PART 4: TRANSMISSION OF INDOOR SOUND TO THE OUTSIDE |
I.S. EN 12354-1:2000
|
BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDINGS FROM THE PERFORMANCE OF ELEMENTS - PART 1: AIRBORNE SOUND INSULATION BETWEEN ROOMS |
07/30161870 DC : 0
|
BS EN 15657-1 - ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF AIRBORNE AND STRUCTURE BORNE SOUND FROM BUILDING EQUIPMENT - PART 1: SIMPLIFIED CASES WHERE THE EQUIPMENT MOBILITIES ARE MUCH HIGHER THAN THE RECEIVER MOBILITIES, TAKING WHIRLPOOL BATHS AS AN EXAMPLE |
01/560802 DC : DRAFT FEB 2001
|
BS EN ISO 10848-3 - ACOUSTICS - LABORATORY MEASUREMENT OF THE FLANKING TRANSMISSION OF AIRBORNE AND IMPACT NOISE BETWEEN ADJOINING ROOMS - PART 3: APPLICATION TO LIGHT ELEMENTS WHEN THE JUNCTION HAS A SUBSTANTIAL INFLUENCE |
11/30251988 DC : 0
|
BS EN 14190 - GYPSUM PLASTERBOARD PRODUCTS FROM PROCESSING - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
00/107014 DC : DRAFT OCT 2000
|
PREN 520 - GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
00/106800 DC : DRAFT OCT 2000
|
PREN 13915 - PREFABRICATED GYPSUM WALLBOARD PANELS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
05/30135869 DC : 0
|
EN 15283-1 - GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 1: GYPSUM BOARDS WITH MAT REINFORCEMENT |
00/101411 DC : DRAFT FEB 2000
|
BS EN 13815 - FIBROUS GYPSUM PLASTER PRODUCTS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
I.S. CEN TR 14788:2006
|
VENTILATION FOR BUILDINGS - DESIGN AND DIMENSIONING OF RESIDENTIAL VENTILATION SYSTEMS |
I.S. EN 16703:2015
|
ACOUSTICS - TEST CODE FOR DRYWALL SYSTEMS OF PLASTERBOARD WITH STEEL STUDS - AIRBORNE SOUND INSULATION |
PREN 12859 : DRAFT 2010
|
GYPSUM BLOCKS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
ISO 15712-1:2005
|
Building acoustics Estimation of acoustic performance of buildings from the performance of elements Part 1: Airborne sound insulation between rooms |
ISO 15712-2:2005
|
Building acoustics Estimation of acoustic performance of buildings from the performance of elements Part 2: Impact sound insulation between rooms |
UNE-EN 12602:2011
|
Prefabricated reinforced components of autoclaved aerated concrete |
I.S. EN 13279-1:2008
|
GYPSUM BINDERS AND GYPSUM PLASTERS - PART 1: DEFINITIONS AND REQUIREMENTS |
BS EN ISO 140-4:1998
|
Acoustics. Measurement of sound insulation in buildings and of building elements Field measurements of airborne sound insulation between rooms |
BS EN 13815:2006
|
Fibrous gypsum plaster casts. Definitions, requirements and test methods |
BS EN 12354-2:2000
|
Building acoustics. Estimation of acoustic performance in buildings from the performance of elements Impact sound insulation between rooms |
BS EN 12354-4:2000
|
Building acoustics. Estimation of acoustic performance in buildings from the performance of elements Transmission of indoor sound to the outside |
BS EN ISO 140-12:2000
|
Acoustics. Measurement of sound insulation in buildings and of building elements Laboratory measurement of room-to-room airborne and impact sound insulation of an access floor |
BS EN 14759:2005
|
Shutters. Acoustic insulation relative to airborne sound. Expression of performance |
BS EN 12781:2001
|
Wallcoverings. Specification for cork panels |
DIN EN 15319:2007-10
|
General principles of design of fibrous (gypsum) plaster works |
DIN EN 15318 E : 2008
|
DESIGN AND APPLICATION OF GYPSUM BLOCKS |
BS EN 14351-1 : 2006
|
WINDOWS AND DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PART 1: WINDOWS AND EXTERNAL PEDESTRIAN DOORSETS |
ISO 140-12:2000
|
Acoustics Measurement of sound insulation in buildings and of building elements Part 12: Laboratory measurement of room-to-room airborne and impact sound insulation of an access floor |
ISO 12017:1995
|
Plastics Poly(methyl methacrylate) double- and triple-skin sheets Test methods |
BS EN 12354-3:2000
|
Building acoustics. Estimation of acoustic performance in buildings from the performance of elements Airborne sound insulation against outdoor sound |
BS EN 13279-1:2008
|
Gypsum binders and gypsum plasters Definitions and requirements |
BS EN 15318:2007
|
Design and application of gypsum blocks |
UNE-EN 520:2005
|
Gypsum plasterboards - Definitions, requirements and test methods |
BS EN 14246:2006
|
Gypsum elements for suspended ceilings. Definitions, requirements and test methods |
BS EN 12860:2001
|
Gypsum based adhesives for gypsum blocks. Definitions, requirements and test methods |
BS EN ISO 140-7:1998
|
Acoustics. Measurement of sound insulation in buildings and of building elements Field measurements of impact sound insulation of floors |
BS EN ISO 140-5:1998
|
Acoustics. Measurement of sound insulation in buildings and of building elements Field measurements of airborne sound insulation of facade elements and facades |
UNE-EN 13986:2006
|
Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
ISO 15186-1:2000
|
Acoustics Measurement of sound insulation in buildings and of building elements using sound intensity Part 1: Laboratory measurements |
EN 13241-1:2003+A1:2011
|
Industrial, commercial and garage doors and gates - Product standard - Part 1: Products without fire resistance or smoke control characteristics |
EN 15657-1:2009
|
Acoustic properties of building elements and of buildings - Laboratory measurement of airborne and structure borne sound from building equipment - Part 1: Simplified cases where the equipment mobilities are much higher than the receiver mobilities, taking whirlpool baths as an example |
EN 14366:2004
|
Laboratory measurement of noise from waste water installations |
EN 15283-2:2008+A1:2009
|
Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 2: Gypsum fibre boards |
EN 14963:2006
|
Roof coverings - Continuous rooflights of plastics with or without upstands - Classification, requirements and test methods |
EN 520:2004+A1:2009
|
Gypsum plasterboards - Definitions, requirements and test methods |
EN 15498:2008
|
Precast concrete products - Wood-chip concrete shuttering blocks - Product properties and performance |
EN 14246:2006/AC:2007
|
GYPSUM ELEMENTS FOR SUSPENDED CEILINGS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
EN 13815:2006
|
Fibrous gypsum plaster casts - Definitions, requirements and test methods |
EN 15318 : 2007
|
DESIGN AND APPLICATION OF GYPSUM BLOCKS |
EN 14351-1:2006+A2:2016
|
Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets |
EN 14759:2005
|
Shutters - Acoustic insulation relative to airborne sound - Expression of performance |
EN 16703:2015
|
Acoustics - Test code for drywall systems of plasterboard with steel studs - Airborne sound insulation |
EN ISO 140-12 : 2000
|
ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 12: LABORATORY MEASUREMENT OF ROOM-TO-ROOM AIRBORNE AND IMPACT SOUND INSULATION OF AN ACCESS FLOOR |
EN 1520:2011
|
Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement |
EN 438-7:2005 (edition 2)
|
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes |
EN 15319 : 2007
|
GENERAL PRINCIPLES OF DESIGN OF FIBROUS (GYPSUM) PLASTER WORKS |
BS EN 14963:2006
|
Roof coverings. Continuous rooflights of plastics with or without upstands. Classification, requirements and test methods |
I.S. EN ISO 140-1:1998
|
ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - REQUIREMENTS FOR LABORATORY TEST FACILITIES WITH SUPPRESSED FLANKING TRANSMISSION |
I.S. EN 438-7:2005
|
HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 7: COMPACT LAMINATE AND HPL COMPOSITE PANELS FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES |
UNE-EN 15319:2012
|
General principles of design of fibrous (gypsum) plaster works |
BS EN 15283-2 : 2008
|
GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 2: GYPSUM FIBRE BOARDS |
04/30099887 DC : DRAFT MAY 2004
|
PREN 14963 - ROOF COVERINGS - CONTINUOUS ROOFLIGHTS OF PLASTICS WITH UPSTANDS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS |
NF EN 15037-3 : 2009 + A1 2011
|
PRECAST CONCRETE PRODUCTS - BEAM AND BLOCK FLOOR SYSTEMS - PART 3: CLAY BLOCKS |
14/30297827 DC : 0
|
BS EN 14351-2 - WINDOWS AND DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PART 2: INTERNAL PEDESTRIAN DOORSETS WITHOUT RESISTANCE TO FIRE AND /OR SMOKE LEAKAGE CHARACTERISTICS |
UNE-EN 13815:2012
|
Fibrous gypsum plaster casts - Definitions, requirements and test methods |
EN ISO 12017 : 1996
|
PLASTICS - POLY(METHYL METHACRYLATE) DOUBLE- AND TRIPLE-SKIN SHEETS - TEST METHODS |
BS EN 14366:2004
|
Laboratory measurement of noise from waste water installations |
I.S. EN 15283-2:2008
|
GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 2: GYPSUM FIBRE BOARDS |
DIN EN 14246 E : 2006
|
GYPSUM ELEMENTS FOR SUSPENDED CEILINGS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
DIN EN 520:2009-12
|
Gypsum plasterboards - Definitions, requirements and test methods (includes Amendment A1:2009) |
BS EN 13986 : 2004
|
WOOD-BASED PANELS FOR USE IN CONSTRUCTION - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
BS EN 13085:2001
|
Wallcoverings. Specification for cork rolls |
BS EN 15319:2007
|
General principles of design of fibrous (gypsum) plaster works |
BS EN 12354-1:2000
|
Building acoustics. Estimation of acoustic performance in buildings from the performance of elements Airborne sound insulation between rooms |
DIN EN 14759:2005-07
|
Shutters - Acoustic insulation relative to airborne sound - Expression of performance |
EN 12354-4:2000
|
Building Acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 4: Transmission of indoor sound to the outside |
DIN EN ISO 15186-1:2003-12
|
ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS USING SOUND INTENSITY - PART 1: LABORATORY MEASUREMENTS |
DIN EN ISO 140-1:2005-03
|
ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 1: REQUIREMENTS FOR LABORATORY TEST FACILITIES WITH SUPPRESSED FLANKING TRANSMISSION |
EN 13279-1:2008
|
Gypsum binders and gypsum plasters - Part 1: Definitions and requirements |
EN 12354-2:2000
|
Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 2: Impact sound insulation between rooms |
EN 13085:2001
|
Wallcoverings - Specification for cork rolls |
UNE-EN 13986:2006+A1:2015
|
Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
UNE-EN 14351-1:2006
|
Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics |