EN ISO 3822-1:1999/A1:2008

Current

Current The latest, up-to-date edition.

ACOUSTICS - LABORATORY TESTS ON NOISE EMISSION FROM APPLIANCES AND EQUIPMENT USED IN WATER SUPPLY INSTALLATIONS - PART 1: METHOD OF MEASUREMENT

Available format(s):

Language(s):

Published date: 15-12-2008

Publisher: Comite Europeen de Normalisation

Pure ENs are not available for sale, please purchase a suitable national adoption

Table of Contents - (Show below) - (Hide below)

Foreword
Introduction
1 Scope
2 Normative references
3 Definitions
4 Principle
5 Test arrangement
   5.1 Test room
   5.2 Correction for background noise
   5.3 Test wall
   5.4 Test pipe
   5.5 Connection of appliances
   5.6 Water supply system
   5.7 Stabilising and checking the test arrangement
   5.8 Measurement of intrinsic noise of installation
       arrangement
6 Test equipment
   6.1 Sound level meter and filters
   6.2 Hydraulic measuring instruments
7 Installation noise standard
8 Test procedure
   8.1 General
   8.2 Determination of appliance sound pressure level L[ap]
9 Expression of results
10 Test report
Annex A (informative) - Procedure for venting the piping system
                        (test pipe and twin outlet etc.)
Annex B (informative) - Alternative procedures for measurements for
                        computer-aided test facilities
Annex C (normative) - Selection of samples
Annex D (informative) - Measurement uncertainty

Abstract - (Show below) - (Hide below)

Defines a method of measurement, in the laboratory, of the noise emission resulting from the flow of water through appliances and equipment used in water supply installations.

General Product Information - (Show below) - (Hide below)

Committee	CEN/TC 126
Document Type	Standard
ISBN
Pages
Published
Publisher	Comite Europeen de Normalisation
Status	Current

National Adoptions - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
PN EN ISO 3822-1 : 2001 AMD 1 2009	Identical
DIN EN ISO 3822-1:2009-07	Identical
ISO 3822-1:1999/Amd 1:2008	Identical
I.S. EN ISO 3822-1:1999	Identical
UNE-EN ISO 3822-1:2000	Identical
BS EN ISO 3822-1 : 1999	Identical
NBN EN ISO 3822-1 : 1999 AMD 1 2009	Identical
UNI EN ISO 3822-1 : 2009	Identical
ISO 3822-1:1999	Identical
NF EN ISO 3822-1 : 1999 AMD 1 2009	Identical
NS EN ISO 3822-1 : 1999 AMD 1 2008	Identical
NEN EN ISO 3822-1 : 1999 AMD 1 2009	Identical
SN EN ISO 3822-1 : 1999 AMD 1 2008	Identical
BS EN ISO 3822-1:1999+A1:2008	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

DIN EN 15092:2008-09	BUILDING VALVES - INLINE HOT WATER SUPPLY TEMPERING VALVES - TESTS AND REQUIREMENTS
15/30315069 DC : DRAFT MAY 2015	BS EN 14313 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE POLYETHYLENE FOAM (PEF) PRODUCTS - SPECIFICATION
BS EN 16145:2012	Sanitary tapware. Extractable outlets for sink and basin mixers. General technical specification
13/30280715 DC : 0	BS EN 1287 - SANITARY TAPWARE - LOW PRESSURE THERMOSTATIC MIXING VALVES - GENERAL TECHNICAL SPECIFICATIONS
PREN 14313 : DRAFT 2015	THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE POLYETHYLENE FOAM (PEF) PRODUCTS - SPECIFICATION
PREN 1487 : DRAFT 2012	BUILDING VALVES - HYDAULIC SAFETY GROUPS - TESTS AND REQUIREMENTS
NF EN 806-5 : 2012	SPECIFICATION FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 5: OPERATION AND MAINTENANCE
10/30228907 DC : 0	BS EN 16145 - SANITARY TAPWARE - EXTRACTABLE OUTLETS FOR SINK AND BASIN MIXERS - GENERAL TECHNICAL SPECIFICATION
02/103309 DC : DRAFT MAY 2002	BS EN 14455 - DEVICES TO PREVENT POLLUTION BY BLACKFLOW OF POTABLE WATER - PRESSURISED AIR INLET VALVES DN 15 TO DN 50 INCLUSIVE - FAMILY L, TYPE A AND TYPE B
05/30127036 DC : DRAFT JAN 2005	EN 817 - SANITARY TAPWARE - MECHANICAL MIXERS (PN 10) - GENERAL TECHNICAL SPECIFICATIONS
BS EN 15657:2017	Acoustic properties of building elements and of buildings. Laboratory measurement of structure-borne sound from building service equipment for all installation conditions
06/30153867 DC : 0	BS EN 1112 - SANITARY TAPWARE - SHOWER OUTLETS FOR SANITARY TAPWARE FOR SUPPLY SYSTEMS TYPE 1 AND TYPE 2 - GENERAL TECHNICAL SPECIFICATION
PD CEN/TR 15226:2006	Building products. Treatment of acoustics in product technical specifications
04/30126822 DC : 0	EN 15092 - BUILDING VALVES - INLINE HOT WATER SUPPLY TEMPERING VALVES - TESTS AND REQUIREMENTS
DIN EN 15657 E : 2017	ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF STRUCTURE-BORNE SOUND FROM BUILDING SERVICE EQUIPMENT FOR ALL INSTALLATION CONDITIONS
00/107336 DC : DRAFT OCT 2000	PREN 13959 - ANTI-POLLUTION CHECK VALVES DN 6 TO DN 250 INCLUSIVE - FAMILY E, TYPE A, B, C AND D
05/30132377 DC : DRAFT APR 2005	EN 15219 - WATER EQUIPMENT INSIDE BUILDINGS - NITRATE REMOVAL DEVICES - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
DIN EN 14313:2016-03	THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE POLYETHYLENE FOAM (PEF) PRODUCTS - SPECIFICATION
UNI EN 15657-1 : 2009	ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF AIRBORNE AND STRUCTURE BORNE SOUND FROM BUILDING EQUIPMENT - PART 1: SIMPLIFIED CASES WHERE THE EQUIPMENT MOBILITIES ARE MUCH HIGHER THAN THE RECEIVER MOBILITIES, TAKING WHIRLPOOL BATHS AS AN EXAMPLE
DIN EN 14313 E : 2016	THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE POLYETHYLENE FOAM (PEF) PRODUCTS - SPECIFICATION
DIN EN 14304:2016-03	THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE FLEXIBLE ELASTOMERIC FOAM (FEF) PRODUCTS - SPECIFICATION
EN ISO 10052:2004/A1:2010	ACOUSTICS - FIELD MEASUREMENTS OF AIRBORNE AND IMPACT SOUND INSULATION AND OF SERVICE EQUIPMENT SOUND - SURVEY METHOD
I.S. EN 15657-1:2009	ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF AIRBORNE AND STRUCTURE BORNE SOUND FROM BUILDING EQUIPMENT - PART 1: SIMPLIFIED CASES WHERE THE EQUIPMENT MOBILITIES ARE MUCH HIGHER THAN THE RECEIVER MOBILITIES, TAKING WIRLPOOL BATHS AS AN EXAMPLE
I.S. CEN/TR 15226:2006	BUILDING PRODUCTS - TREATMENT OF ACOUSTICS IN PRODUCT TECHNICAL SPECIFICATIONS
DIN EN ISO 10052:2010-10	Acoustics - Field measurements of airborne and impact sound insulation and of service equipment sound - Survey method (ISO 10052:2004 + Amd 1:2010) (includes Amendment A1:2010)
DIN EN 13434:2006-05	DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - MECHANICAL DISCONNECTOR, HYDRAULIC ACTUATED - FAMILY G - TYPE B
DIN EN 13433:2006-05	DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - MECHANICAL DISCONNECTOR, DIRECT ACTUATED - FAMILY G - TYPE A
DIN EN 15219 E : 2008	WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - NITRATE REMOVAL DEVICES - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
BS EN 14454:2005	Devices to prevent pollution by backflow of potable water. Hose union backflow preventer DN 15 to DN 32 inclusive. Family H, type A
BS EN 14743 : 2005	WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - SOFTENERS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
BS EN 13828:2003	Building valves. Manually operated copper alloy and stainless steel ball valves for potable water supply in buildings. Tests and requirements
BS EN 817:2008	Sanitary tapware. Mechanical mixing valves (PN 10). General technical specifications
BS EN 14453:2005	Devices to prevent pollution by backflow of potable water. Pipe interrupter with permanent atmospheric vent DN 10 to DN 20. Family D, type C
BS EN 1567 : 2000	BUILDING VALVES - WATER PRESSURE REDUCING VALVES AND COMBINATION WATER REDUCING VALVES - REQUIREMENTS AND TESTS
BS EN 13433:2007	Devices to prevent pollution by backflow of potable water. Mechanical disconnector, direct actuated. Family G, type A
BS EN 14367:2005	Non controllable backflow preventer with different pressure zones. Family C, type A
DIN EN 200:2008-10	SANITARY TAPWARE - SINGLE TAPS AND COMBINATION TAPS FOR WATER SUPPLY SYSTEMS OF TYPE 1 AND TYPE 2 - GENERAL TECHNICAL SPECIFICATION
DIN EN 13828:2003-12	BUILDING VALVES - MANUALLY OPERATED COPPER ALLOY AND STAINLESS STEEL BALL VALVES FOR POTABLE WATER SUPPLY IN BUILDINGS - TESTS AND REQUIREMENTS
EN 12541:2002	Sanitary tapware - Pressure flushing valves and automatic closing urinal valves PN 10
EN 1112:2008	Sanitary tapware - Shower outlets for sanitary tapware for water supply systems of type 1 and type 2 - General technical specification
EN 12729:2002	Devices to prevent pollution by backflow of potable water - Controllable backflow preventer with reduced pressure zone - Family B - Type A
EN 1111:2017	Sanitary tapware - Thermostatic mixing valves (PN 10) - General technical specification
EN 12354-5:2009/AC:2010	BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDING FROM THE PERFORMANCE OF ELEMENTS - PART 5: SOUNDS LEVELS DUE TO THE SERVICE EQUIPMENT
EN 13433:2006	Devices to prevent pollution by backflow of potable water - Mechanical disconnector, direct actuated - Family G, type A
DIN EN 14367:2005-10	Non controllable backflow preventer with different pressure zones - Family C, type A
CEN/TR 15226:2006	Building products - Treatment of acoustics in product technical specifications
DIN EN 816:2017-10	SANITARY TAPWARE - AUTOMATIC SHUT-OFF VALVES PN 10
DIN EN 1111:2017-10	SANITARY TAPWARE - THERMOSTATIC MIXING VALVES (PN 10) - GENERAL TECHNICAL SPECIFICATION
DIN EN 14453:2005-08	Devices to prevent pollution by backflow of potable water - Pipe interrupter with permanent atmospheric vent DN 10 to DN 20 - Family D, type C; German version EN 14453:2005
I.S. EN 12354-5:2009	BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDING FROM THE PERFORMANCE OF ELEMENTS - PART 5: SOUNDS LEVELS DUE TO THE SERVICE EQUIPMENT
I.S. EN 12729:2002	DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - CONTROLLABLE BACKFLOW PREVENTER WITH REDUCED PRESSURE ZONE - FAMILY B - TYPE A
15/30328393 DC : 0	BS EN 816 - SANITARY TAPWARE - AUTOMATIC SHUT-OFF VALVES PN 10
DIN EN 16145:2013-03	Sanitary tapware - Extractable outlets for sink and basin mixers - General technical specification
EN 1488:2000	Building valves - Expansion groups - Tests and requirements
PREN 14304 : DRAFT 2015	THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE FLEXIBLE ELASTOMERIC FOAM (FEF) PRODUCTS - SPECIFICATION
DIN EN 14506 E : 2005	DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - AUTOMATIC DIVERTER - FAMILY H, TYPE C
I.S. EN 14304:2015	THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE FLEXIBLE ELASTOMERIC FOAM (FEF) PRODUCTS - SPECIFICATION
BS EN 14304 : 2009	THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE FLEXIBLE ELASTOMERIC FOAM (FEF) PRODUCTS - SPECIFICATION
I.S. EN ISO 10052:2005	ACOUSTICS - FIELD MEASUREMENTS OF AIRBORNE AND IMPACT SOUND INSULATION AND OF SERVICE EQUIPMENT SOUND - SURVEY METHOD
I.S. EN 14506:2005	DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - AUTOMATIC DIVERTER - FAMILY H, TYPE C
I.S. EN 16145:2012	SANITARY TAPWARE - EXTRACTABLE OUTLETS FOR SINK AND BASIN MIXERS - GENERAL TECHNICAL SPECIFICATION
UNI EN 16145 : 2013	SANITARY TAPWARE - EXTRACTABLE OUTLETS FOR SINK AND BASIN MIXERS - GENERAL TECHNICAL SPECIFICATION
DIN EN 12354-5:2009-10	Building acoustics - Estimation of acoustic performance of building from the performance of elements - Part 5: Sounds levels due to the service equipment
DIN EN 1112:2008-06	SANITARY TAPWARE - SHOWER OUTLETS FOR SANITARY TAPWARE FOR WATER SUPPLY SYSTEMS OF TYPE 1 AND TYPE 2 - GENERAL TECHNICAL SPECIFICATION
BS EN 1112:2008	Sanitary tapware. Shower outlets for sanitary tapware for water supply systems type 1 and type 2. General technical specification
BS EN 12729:2002	Devices to prevent pollution by backflow of potable water. Controllable backflow preventer with reduced pressure zone. Family B. Type A
DIN EN 1487:2000-06	BUILDING VALVES - HYDRAULIC SAFETY GROUPS - TESTS AND REQUIREMENTS
I.S. EN 817:2008	SANITARY TAPWARE - MECHANICAL MIXING VALVES (PN 10) - GENERAL TECHNICAL SPECIFICATIONS
I.S. EN 1111:2017	SANITARY TAPWARE - THERMOSTATIC MIXING VALVES (PN 10) - GENERAL TECHNICAL SPECIFICATION
I.S. EN 246:2003	SANITARY TAPWARE - GENERAL SPECIFICATION FOR FLOW RATE REGULATORS
I.S. EN 1112:2008	SANITARY TAPWARE - SHOWER OUTLETS FOR SANITARY TAPWARE FOR WATER SUPPLY SYSTEMS OF TYPE 1 AND TYPE 2 - GENERAL TECHNICAL SPECIFICATION
I.S. EN 200:2008	SANITARY TAPWARE - SINGLE TAPS AND COMBINATION TAPS FOR WATER SUPPLY SYSTEMS OF TYPE 1 AND TYPE 2 - GENERAL TECHNICAL SPECIFICATION
I.S. EN 15219:2006	WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - NITRATE REMOVAL DEVICES - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
I.S. EN 13434:2006	DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - MECHANICAL DISCONNECTOR, HYDRAULIC ACTUATED - FAMILY G, TYPE B
I.S. EN 14743:2005	WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - SOFTENERS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
I.S. EN 816:2017	SANITARY TAPWARE - AUTOMATIC SHUT-OFF VALVES PN 10
DIN EN 12541:2003-03	SANITARY TAPWARE - PRESSURE FLUSHING VALVES AND AUTOMATIC CLOSING URINAL VALVES PN 10
I.S. EN 1487:2014	BUILDING VALVES - HYDRAULIC SAFETY GROUPS - TESTS AND REQUIREMENTS
I.S. EN 13433:2006	DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - MECHANICAL DISCONNECTOR, DIRECT ACTUATED - FAMILY G, TYPE A
DIN EN 15657-1:2009-10	ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF AIRBORNE AND STRUCTURE BORNE SOUND FROM BUILDING EQUIPMENT - PART 1: SIMPLIFIED CASES WHERE THE EQUIPMENT MOBILITIES ARE MUCH HIGHER THAN THE RECEIVER MOBILITIES, TAKING WIRLPOOL BATHS AS AN EXAMPLE
BS EN 15092:2008	Building valves. Inline hot water supply tempering valves. Tests and requirements
DIN EN 15657:2016-02 (Draft)	ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF STRUCTURE-BORNE SOUND FROM BUILDING SERVICE EQUIPMENT FOR ALL INSTALLATION CONDITIONS
99/100668 DC : DRAFT JAN 1999	PREN 13434 - DISCONNECTOR HYDRAULIC ACTUATED FAMILY G TYPE B - CHARACTERISTICS AND TESTS
DIN EN 14304 E : 2016	THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE FLEXIBLE ELASTOMERIC FOAM (FEF) PRODUCTS - SPECIFICATION
15/30321802 DC : 0	BS EN 1111 - SANITARY TAPWARE - THERMOSTATIC MIXING VALVES (PN 10) - GENERAL TECHNICAL SPECIFICATION
07/19990369 DC : 0	BS EN 806-4 - SPECIFICATIONS FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 4 - INSTALLATION
I.S. EN 15092:2008	BUILDING VALVES - INLINE HOT WATER SUPPLY TEMPERING VALVES - TESTS AND REQUIREMENTS
DIN EN 15096:2008-04	DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - HOSE UNION ANTI-VACUUM VALVES - DN 15 TO DN 25 INCLUSIVE FAMILY H, TYPE B AND TYPE D - GENERAL TECHNICAL SPECIFICATION
UNE-EN 14313:2017	Thermal insulation products for building equipment and industrial installations - Factory made polyethylene foam (PEF) products - Specification
UNI EN ISO 10052 : 2010	ACOUSTICS - FIELD MEASUREMENTS OF AIRBORNE AND IMPACT SOUND INSULATION AND OF SERVICE EQUIPMENT SOUND - SURVEY METHOD
I.S. EN 15096:2008	DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - HOSE UNION ANTI-VACUUM VALVES - DN 15 TO DN 25 INCLUSIVE FAMILY H, TYPE B AND TYPE D - GENERAL TECHNICAL SPECIFICATION
DIN EN 14451:2005-08	DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - IN-LINE ANTI-VACUUM VALVES DN 8 TO DN 80 - FAMILY D, TYPE A
DIN EN 1487:2014-09	BUILDING VALVES - HYDRAULIC SAFETY GROUPS - TESTS AND REQUIREMENTS
DIN EN 817:2008-09	SANITARY TAPWARE - MECHANICAL MIXING VALVES (PN 10) - GENERAL TECHNICAL SPECIFICATIONS
DIN EN 816:2015-11 (Draft)	SANITARY TAPWARE - AUTOMATIC SHUT-OFF VALVES PN 10
DIN EN 14452 E : 2005	DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - PIPE INTERRUPTER WITH ATMOSPHERIC VENT AND MOVING ELEMENT DN 10 TO DN 20 - FAMILY D, TYPE B
DIN EN 14451 E : 2005	DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - IN-LINE ANTI-VACUUM VALVES DN 8 TO DN 80 - FAMILY D, TYPE A
DIN EN 14454 E : 2005	DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - HOSE UNION BACKFLOW PREVENTER DN 15 TO DN 32 - FAMILY H, TYPE A
BS EN 14451:2005	Devices to prevent pollution by backflow of potable water. In-line anti-vacuum valves DN 8 to DN 80. Family D, type A
BS EN ISO 16032:2004	Acoustics. Measurement of sound pressure level from service equipment in buildings. Engineering method
BS EN 246:2003	Sanitary tapware. General specifications for flow rate regulators
DIN EN 14743:2007-09	WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - SOFTENERS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
EN 15096:2008	Devices to prevent pollution by backflow of potable water - Hose Union anti-vacuum valves - DN 15 to DN 25 inclusive Family H, type B and type D - General technical specification
EN 14451:2005	Devices to prevent pollution by backflow of potable water - In-line anti-vacuum valves DN 8 to DN 80 - Family D, type A
I.S. EN 14451:2005	DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - IN-LINE ANTI-VACUUM VALVES DN 8 TO DN 80 - FAMILY D, TYPE A
ONORM EN 14451 : 2005	DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - IN-LINE ANTI-VACUUM VALVES DN 8 TO DN 80 - FAMILY D, TYPE A
EN 15657:2017	Acoustic properties of building elements and of buildings - Laboratory measurement of structure-borne sound from building service equipment for all installation conditions
UNI EN 1487 : 2014	BUILDING VALVES - HYDRAULIC SAFETY GROUPS - TESTS AND REQUIREMENTS
UNI EN 1112 : 2008	SANITARY TAPWARE - SHOWER OUTLETS FOR SANITARY TAPWARE FOR WATER SUPPLY SYSTEMS OF TYPE 1 AND TYPE 2 - GENERAL TECHNICAL SPECIFICATION
UNI EN 817 : 2008	SANITARY TAPWARE - MECHANICAL MIXING VALVES (PN 10) - GENERAL TECHNICAL SPECIFICATIONS
UNI EN 200 : 2008	SANITARY TAPWARE - SINGLE TAPS AND COMBINATION TAPS FOR WATER SUPPLY SYSTEMS OF TYPE 1 AND TYPE 2 - GENERAL TECHNICAL SPECIFICATION
UNI EN 12354-5 : 2009	BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDING FROM THE PERFORMANCE OF ELEMENTS - PART 5: SOUNDS LEVELS DUE TO THE SERVICE EQUIPMENT
BS EN 806-5:2012	Specifications for installations inside buildings conveying water for human consumption Operation and maintenance
DIN EN 15096 E : 2008	DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - HOSE UNION ANTI-VACUUM VALVES - DN 15 TO DN 25 INCLUSIVE FAMILY H, TYPE B AND TYPE D - GENERAL TECHNICAL SPECIFICATION
BS EN 14506:2005	Devices to prevent pollution by backflow of potable water. Automatic diverter. Family H, type C
15/30315090 DC : DRAFT MAY 2015	BS EN 14304 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE FLEXIBLE ELASTOMERIC FOAM (FEF) PRODUCTS - SPECIFICATION
DIN EN 806-5:2012-04	Specifications for installations inside buildings conveying water for human consumption - Part 5: Operation and maintenance
05/30136552 DC : 0	PREN 14304 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE FLEXIBLE ELASTOMERIC FOAM (FEF) - SPECIFICATION
09/30200073 DC : 0	BS EN 806-5 - SPECIFICATION FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 5: OPERATION AND MAINTENANCE
12/30260007 DC : 0	BS EN 15091 - SANITARY TAPWARE - ELECTRONIC OPENING AND CLOSING SANITARY TAPWARE
I.S. EN 1488:2000	BUILDING VALVES - EXPANSION GROUPS - TESTS AND REQUIREMENTS
17/30333049 DC : 0	BS EN ISO 3822-3 - ACOUSTICS - LABORATORY TESTS ON NOISE EMISSION FROM APPLIANCES AND EQUIPMENT USED IN WATER SUPPLY INSTALLATIONS - PART 3: MOUNTING AND OPERATING CONDITIONS FOR IN-LINE VALVES AND APPLIANCES
02/103308 DC : DRAFT MAY 2002	BS EN 14454 - DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - HOSE UNION BACKFLOW PREVENTER DN 15 TO DN 32 INCLUSIVE - FAMILY H, TYPE A
04/30126825 DC : DRAFT DEC 2004	EN 15091 - SANITARY TAPWARE - ELECTRONIC OPENING AND CLOSING SANITARY TAPWARE
PREN 15091 : DRAFT 2012	SANITARY TAPWARE - ELECTRONIC OPENING AND CLOSING SANITARY TAPWARE
PREN 816 : DRAFT 2015	SANITARY TAPWARE - AUTOMATIC SHUT-OFF VALVES PN 10
I.S. EN 15657:2017	ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF STRUCTURE-BORNE SOUND FROM BUILDING SERVICE EQUIPMENT FOR ALL INSTALLATION CONDITIONS
I.S. EN 14313:2015	THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE POLYETHYLENE FOAM (PEF) PRODUCTS - SPECIFICATION
DIN EN 14453 E : 2005	DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - PIPE INTERRUPTER WITH PERMANENT ATMOSPHERIC VENT DN 10 TO DN 20 - FAMILY D, TYPE C
DIN EN 14455 E : 2005	DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - PRESSURISED AIR INLET VALVES DN 15 TO DN 50 - FAMILY L, TYPE A AND TYPE B
UNE-EN 246:2004	Sanitary tapware. General specifications for flow rate regulators.
ISO 16032:2004	Acoustics — Measurement of sound pressure level from service equipment in buildings — Engineering method
BS EN 1488:2000	Building valves. Expansion groups. Tests and requirements
ISO 10052:2004	Acoustics Field measurements of airborne and impact sound insulation and of service equipment sound Survey method
DIN EN 15219:2008-02	WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - NITRATE REMOVAL DEVICES - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
BS EN 12541:2002	Sanitary tapware. Pressure flushing valves and automatic closing urinal valves PN 10
BS EN 15219 : 2006	WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - NITRATE REMOVAL DEVICES - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
BS EN 1487:2014	Building valves. Hydraulic safety groups. Tests and requirements
BS EN 13959:2004	Anti-pollution check valves. DN 6 to DN 250 inclusive Family E, type A, B, C, and D
BS EN 1111:2017	Sanitary tapware. Thermostatic mixing valves (PN 10). General technical specification
BS EN 14124:2004	Inlet valves for flushing cisterns with internal overflow
BS EN 12354-5:2009	Building acoustics. Estimation of acoustic performance of building from the performance of elements Sounds levels due to the service equipment
BS EN 1213:2000	Building valves. Copper alloy stopvalves for potable water supply in buildings. Tests and requirements
BS EN 806-2:2005	Specifications for installations inside buildings conveying water for human consumption Design
BS EN 816:2017	Sanitary tapware. Automatic shut-off valves PN 10
BS EN 14452:2005	Devices to prevent pollution by backflow of potable water. Pipe interrupter with atmospheric vent and moving element DN 10 to DN 20. Family D, t ype B
BS EN 13434:2006	Devices to prevent pollution by backflow of potable water. Mechanical disconnector, hydraulic actuated. Family G, type B
DIN EN 14455:2005-08	Devices to prevent pollution by backflow of potable water - Pressurised air inlet valves DN 15 to DN 50 - Family L, type A and type B
EN 15657-1:2009	Acoustic properties of building elements and of buildings - Laboratory measurement of airborne and structure borne sound from building equipment - Part 1: Simplified cases where the equipment mobilities are much higher than the receiver mobilities, taking whirlpool baths as an example
EN 14455:2005	Devices to prevent pollution by backflow of potable water - Presssurised air inlet valves DN 15 to DN 50 - Family L, type A and type B
EN 15092:2008	Building valves - Inline hot water supply tempering valves - Tests and requirements
EN 13828:2003	Building valves - Manually operated copper alloy and stainless steel ball valves for potable water supply in buildings -Tests and requirements
EN 806-2:2005	Specification for installations inside buildings conveying water for human consumption - Part 2: Design
EN 14743:2005+A1:2007	Water conditioning equipment inside buildings - Softeners - Requirements for performance, safety and testing
EN 1487:2014	Building valves - Hydraulic safety groups - Tests and requirements
EN 1567:1999	Building valves - Water pressure reducing valves and combination water pressure reducing valves - Requirements and tests
EN 816:2017	Sanitary tapware - Automatic shut-off valves PN 10
EN 14124:2004	Inlet valves for flushing cisterns with internal overflow
EN 16145:2012	Sanitary tapware - Extractable outlets for sink and basin mixers - General technical specification
EN 14304:2015	Thermal insulation products for building equipment and industrial installations - Factory made flexible elastomeric foam (FEF) products - Specification
EN 200:2008	Sanitary tapware - Single taps and combination taps for water supply systems of type 1 and type 2 - General technical specification
EN 14506:2005	Devices to prevent pollution by backflow of potable water - Automatic diverter - Family H, type C
EN 14454:2005	Devices to prevent pollution by backflow of potable water - Hose union backflow preventer DN 15 to DN 32 - Family H, type A
EN ISO 16032:2004	Acoustics - Measurement of sound pressure level from service equipment in buildings - Engineering method (ISO 16032:2004)
EN 14452:2005	Devices to prevent pollution by backflow of potable water - Pipe interrupter with atmospheric vent and moving element DN 10 to DN 20 - Family D, type B
EN 13959:2004	Anti-pollution check valves - DN 6 to DN 250 inclusive family E, type A, B, C and D
EN 15219:2006+A1:2007	Water conditioning equipment inside buildings - Nitrate removal devices - Requirements for performance, safety and testing
EN 817:2008	Sanitary tapware - Mechanical mixing valves (PN 10) - General technical specifications
EN 14367:2005	Non controllable backflow preventer with different pressure zones - Family C, type A
EN 806-5:2012	Specifications for installations inside buildings conveying water for human consumption - Part 5: Operation and maintenance
EN 14313:2015	Thermal insulation products for building equipment and industrial installations - Factory made polyethylene foam (PEF) products - Specification
EN 14453:2005	Devices to prevent pollution by backflow of potable water - Pipe interrupter with permanent atmospheric vent DN 10 to DN 20 - Family D, type C
BS EN 15657-1:2009	Acoustic properties of building elements and of buildings. Laboratory measurement of airborne and structure borne sound from building equipment Simplified cases where the equipment mobilities are much higher than the receiver mobilities, taking whirlpool baths as an example
13/30268239 DC : 0	BS EN 1487 - BUILDING VALVES - HYDAULIC SAFETY GROUPS - TESTS AND REQUIREMENTS
PREN 1111 : DRAFT 2015	SANITARY TAPWARE - THERMOSTATIC MIXING VALVES (PN 10) - GENERAL TECHNICAL SPECIFICATION
DIN EN 15092 E : 2008	BUILDING VALVES - INLINE HOT WATER SUPPLY TEMPERING VALVES - TESTS AND REQUIREMENTS
99/100667 DC : DRAFT JAN 1999	PREN 13433 - DISCONNECTOR DIRECT ACTUATED FAMILY G TYPE A - CHARACTERISTICS AND TESTS
13/30280712 DC : 0	BS EN 1111 - SANITARY TAPWARE - THERMOSTATIC MIXING VALVES (PN 10) - GENERAL TECHNICAL SPECIFICATION
UNI EN 806-5 : 2012	SPECIFICATIONS FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 5: OPERATION AND MAINTENANCE
UNI EN 15092 : 2008	BUILDING VALVES - INLINE HOT WATER SUPPLY TEMPERING VALVES - TESTS AND REQUIREMENTS
BS EN 15096:2008	Devices to prevent pollution by backflow of potable water. Hose Union anti-vacuum valves. DN 15 to DN 25 inclusive Family H, type B and type D. General technical specification
16/30333609 DC : 0	BS EN 15657 - ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF STRUCTURE-BORNE SOUND FROM BUILDING SERVICE EQUIPMENT FOR ALL INSTALLATION CONDITIONS
I.S. EN 806-5:2012	SPECIFICATIONS FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 5: OPERATION AND MAINTENANCE
UNI EN 806-2 : 2008	SPECIFICATION FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 2: DESIGN
UNE-EN 16145:2014	Sanitary tapware - Extractable outlets for sink and basin mixers - General technical specification
UNE-EN 806-5:2013	Specifications for installations inside buildings conveying water for human consumption - Part 5: Operation and maintenance
BS EN 14313 : 2009	THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE POLYETHYLENE FOAM (PEF) PRODUCTS - SPECIFICATION
DIN EN 1111:2015-07 (Draft)	SANITARY TAPWARE - THERMOSTATIC MIXING VALVES (PN 10) - GENERAL TECHNICAL SPECIFICATION
DIN EN 14367 E : 2005	NON CONTROLLABLE BACKFLOW PREVENTER WITH DIFFERENT PRESSURE ZONES - FAMILY C, TYPE A
DIN EN 806-2:2005-06	Specification for installations inside buildings conveying water for human consumption - Part 2: Design
DIN EN 14743 E : 2007	WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - SOFTENERS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
BS EN 200:2008	Sanitary tapware. Single taps and combination taps for water supply systems of type 1 and type 2. General technical specification
BS EN ISO 10052 : 2004	ACOUSTICS - FIELD MEASUREMENTS OF AIRBORNE AND IMPACT SOUND INSULATION AND OF SERVICE EQUIPMENT SOUND - SURVEY METHOD
BS EN 14455:2005	Devices to prevent pollution by backflow of potable water. Pressurised air inlet valves DN 15 to DN 50. Family L, type A and type B
EN 13434:2006	Devices to prevent pollution by backflow of potable water - Mechanical disconnector, hydraulic actuated - Family G, type B
EN 246:2003	Sanitary tapware - General specifications for flow rate regulators
EN 1213:1999	Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements
DIN EN 13959:2005-01	Anti-pollution check valves - DN 6 to DN 250 inclusive - Family E, type A, B, C and D; German version EN 13959:2004
DIN EN 15657:2017-10	ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF STRUCTURE-BORNE SOUND FROM BUILDING SERVICE EQUIPMENT FOR ALL INSTALLATION CONDITIONS
DIN EN 14454:2005-08	Devices to prevent pollution by backflow of potable water - Hose union backflow preventer DN 15 to DN 32 - Family H; type A
DIN EN 14452:2005-08	Devices to prevent pollution by backflow of potable water - Pipe interrupter with atmospheric vent and moving element DN 10 to DN 20 - Family D, type B; German version EN 14452:2005
DIN EN 14124:2005-02	Inlet valves for flushing cisterns with internal overflow
DIN EN 14506:2005-08	Devices to prevent pollution by backflow of potable water - Automatic diverter - Family H, type C
DIN EN ISO 16032:2004-12	Acoustics - Measurement of sound pressure level from service equipment in buildings - Engineering method (ISO 16032:2004); German version EN ISO 16032:2004
DIN EN 246:2003-11	Sanitary tapware - General specifications for flow rate regulators
I.S. EN ISO 16032:2004	ACOUSTICS - MEASUREMENT OF SOUND PRESSURE LEVEL FROM SERVICE EQUIPMENT IN BUILDINGS - ENGINEERING METHOD

Standards Referencing This Book - (Show below) - (Hide below)

EN ISO 3822-4:1997	Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 4: Mounting and operating conditions for special appliances
ISO 7-1:1994	Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation
ISO 3822-2:1995	Acoustics Laboratory tests on noise emission from appliances and equipment used in water supply installations Part 2: Mounting and operating conditions for draw-off taps and mixing valves
ISO 65:1981	Carbon steel tubes suitable for screwing in accordance with ISO 7-1
ISO 3822-3:1997	Acoustics Laboratory tests on noise emission from appliances and equipment used in water supply installations Part 3: Mounting and operating conditions for in-line valves and appliances
EN ISO 3822-2:1995	Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 2: Mounting and operating conditions for draw-off taps and mixing valves (ISO 3822-2:1995)
EN 60651:1994/A2:2001	SOUND LEVEL METERS (IEC 60651:1979/A2:2000)
EN 61260:1995/A1:2001	ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Sorry this product is not available in your region.

Add To Cart