• ETS 300 132-1 : 20001

    Current The latest, up-to-date edition.

    EQUIPMENT ENGINEERING (EE) - POWER SUPPLY INTERFACE AT THE INPUT TO TELECOMMUNICATIONS EQUIPMENT - OPERATED BY ALTERNATING CURRENT (AC) DERIVED FROM DIRECT CURRENT (DC) SOURCES

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date: 

    Publisher:  European Telecommunications Standards Institute

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    1 Scope
    2 Normative references
    3 Definitions and abbreviations
      3.1 Definitions
      3.2 Abbreviations
    4 Requirements
      4.1 Nominal value of the supply voltage
      4.2 Normal service voltage range at interface "A"
      4.3 Abnormal service voltage ranges at interface "A"
      4.4 Abnormal service voltage under temporary
          conditions
      4.5 Voltage changes due to the regulation of
          secondary voltage
      4.6 Supply protection at interface "A"
      4.7 Surge current on connection of interface "A"
    5 Earthing and bonding
    6 Electrical safety requirements
      6.1 General
    7 EMC requirements
    Annex A (informative): Information and guide on safety
    Annex B (informative): Guide for measuring inrush
                           current and for transferring the
                           recorded pulses onto the limit
                           chart
      B.1 Measurement
      B.2 Pulse waveform transformation
    Annex C (informative): Identification of interface A
    Annex D (informative): Bibliography
    History

    Abstract - (Show below) - (Hide below)

    Aims at providing compatibility between the power supply equipment and the power consuming telecommunications equipment, and also between different load units connected to the same power supply.

    General Product Information - (Show below) - (Hide below)

    Committee EE 2
    Document Type Standard
    Publisher European Telecommunications Standards Institute
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    I.S. ETS 300 197:1994 TRANSMISSION AND MULTIPLEXING (TM); PARAMETERS FOR RADIO RELAY SYSTEMS FOR THE TRANSMISSION OF DIGITAL SIGNALS AND ANALOGUE VIDEO SIGNALS OPERATING AT 38 GHZ
    NF EN 302063 : 2003 FIXED RADIO SYSTEMS - MULTIPOINT EQUIPMENT - MULTIPOINT DIGITAL RADIO SYSTEMS OPERATING IN THE 31,0 GHZ TO 33,4 GHZ (32 GHZ) FREQUENCY RANGE
    TS 101 999 : 1.1.1 BROADBAND RADIO ACCESS NETWORKS (BRAN); HIPERACCESS; PHY PROTOCOL SPECIFICATION
    NF EN 301021 : 2004 FIXED RADIO SYSTEMS - POINT-TO-MULTIPOINT EQUIPMENT - TIME DIVISION MULTIPLE ACCESS (TDMA) - POINT-TO-MULTIPOINT DIGITAL RADIO SYSTEMS IN FREQUENCY BANDS IN THE RANGE 3 GHZ TO 11 GHZ
    EN 300 132-1 : 2.0.1 DRAFT ENVIRONMENTAL ENGINEERING (EE); POWER SUPPLY INTERFACE AT THE INPUT TO INFORMATION AND COMMUNICATION TECHNOLOGY (ICT) EQUIPMENT; PART 1: OPERATED BY ALTERNATING CURRENT (AC) SOURCE
    ES 202 336-6 : 1.1.1 ENVIRONMENTAL ENGINEERING (EE); MONITORING AND CONTROL INTERFACE FOR INFRASTRUCTURE EQUIPMENT (POWER, COOLING AND BUILDING ENVIRONMENT SYSTEMS USED IN TELECOMMUNICATION NETWORKS); PART 6: AIR CONDITIONING SYSTEM CONTROL AND MONITORING INFORMATION MODEL
    NF EN 300632 : 2002 TRANSMISSION AND MULTIPLEXING (TM) - FIXED RADIO LINK EQUIPMENT FOR THE TRANSMISSION OF ANALOGUE VIDEO SIGNALS OPERATING IN THE FREQUENCY BANDS 24,25 GHZ TO 29,50 GHZ AND 31,0 GHZ TO 31,8 GHZ
    TS 101 787 : 1.1.1 FIXED RADIO SYSTEMS; POINT-TO-POINT EQUIPMENT; PARAMETERS FOR RADIO SYSTEMS FOR THE TRANSMISSION OF SUB-STM-O DIGITAL SIGNALS OPERATING IN THE 18 GHZ FREQUENCY BAND
    TR 102 336 : 1.1.1 ENVIRONMENTAL ENGINEERING (EE); POWER AND COOLING SYSTEM CONTROL AND MONITORING GUIDANCE
    TR 102 121 : 1.2.1 ENVIRONMENTAL ENGINEERING (EE); GUIDANCE FOR POWER DISTRIBUTION TO TELECOMMUNICATION AND DATACOM EQUIPMENT
    ES 201 468 : 1.4.1 ADDITIONAL ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS AND RESISTIBILITY REQUIREMENTS FOR TELECOMMUNICATIONS EQUIPMENT FOR ENHANCED AVAILABILITY OF SERVICE IN SPECIFIC APPLICATIONS
    ES 202 336-10 : 1.1.1 ENVIRONMENTAL ENGINEERING (EE); MONITORING AND CONTROL INTERFACE FOR INFRASTRUCTURE EQUIPMENT (POWER, COOLING AND BUILDING ENVIRONMENT SYSTEMS USED IN TELECOMMUNICATION NETWORKS); PART 10: AC INVERTER POWER SYSTEM CONTROL AND MONITORING INFORMATION MODEL
    ES 202 336-4 : 1.1.1 ENVIRONMENTAL ENGINEERING (EE); MONITORING AND CONTROL INTERFACE FOR INFRASTRUCTURE EQUIPMENT (POWER, COOLING AND BUILDING ENVIRONMENT SYSTEMS USED IN TELECOMMUNICATION NETWORKS); PART 4: AC DISTRIBUTION POWER SYSTEM CONTROL AND MONITORING INFORMATION MODEL
    ES 202 336-1 : 1.2.1 ENVIRONMENTAL ENGINEERING (EE); MONITORING AND CONTROL INTERFACE FOR INFRASTRUCTURE EQUIPMENT (POWER, COOLING AND BUILDING ENVIRONMENT SYSTEMS USED IN TELECOMMUNICATION NETWORKS) - PART 1: GENERIC INTERFACE
    NF EN 300408 : 2003 TELECOMMUNICATIONS - FIXED RADIO SYSTEMS - POINT-TO-POINT EQUIPMENT - PARAMETERS FOR DIGITAL RADIO SYSTEMS FOR THE TRANSMISSION OF DIGITAL SIGNALS AND ANALOGUE VIDEO SIGNALS OPERATING AT AROUND 58 GHZ, WHICH DO NOT REQUIRE CO-ORDINATED FREQUENCY PLANNING
    TR 101 075 : 4.2.0 DIGITAL CELLULAR TELECOMMUNICATIONS SYSTEM (PHASE 2); BASE STATION AND ANCILLARY EQUIPMENT; PHYSICAL AND ELECTRICAL PARAMETERS; APPLICATION OF STANDARDS AND GUIDANCE NOTES (GSM 11.22 VERSION 4.2.0)
    EN 302 099 : 2.1.1 ENVIRONMENTAL ENGINEERING (EE); POWERING OF EQUIPMENT IN ACCESS NETWORK
    NF EN 300430 : 1999 TRANSMISSION AND MULTIPLEXING (TM) - DIGITAL RADIO-RELAY SYSTEMS (DRRS) - HIGH CAPACITY DRRS CARRYING 1 X SYNCHRONOUS TRANSPORT MODULE-1 (1 X STM-1) SIGNALS OPERATING IN THE 18 GHZ FREQUENCY BAND WITH CHANNEL SPACING OF 55 MHZ
    NF EN 302326-1 : 2006 FIXED RADIO SYSTEMS - MULTIPOINT EQUIPMENT AND ANTENNAS - PART 1: OVERVIEW AND REQUIREMENTS FOR DIGITAL MULTIPOINT RADIO SYSTEMS
    TR 101 651 : 2.1.1 CLASSIFICATION OF THE ELECTROMAGNETIC ENVIRONMENT CONDITIONS FOR EQUIPMENT IN TELECOMMUNICATION NETWORKS
    TR 102 446 : 1.1.1 ENVIRONMENTAL ENGINEERING (EE); GENERAL REQUIREMENTS FOR UPS FOR USE IN TELECOMMUNICATION ENVIRONMENT
    TR 102 532 : 1.2.1 ENVIRONMENTAL ENGINEERING (EE); THE USE OF ALTERNATIVE ENERGY SOLUTIONS IN TELECOMMUNICATION INSTALLATIONS
    EN 300 386-2 : 1.1.3 ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); TELECOMMUNICATION NETWORK EQUIPMENT; ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS; PRODUCT FAMILY STANDARD
    TS 101 785 : 1.1.1 FIXED RADIO SYSTEMS; POINT-TO-POINT EQUIPMENT; PARAMETERS FOR PACKET DATA RADIO SYSTEMS FOR TRANSMISSION OF DIGITAL SIGNALS OPERATING IN THE FREQUENCY RANGE 23, 26, 28 OR 38 GHZ
    EN 300 386 : 1.6.1 TELECOMMUNICATION NETWORK EQUIPMENT; ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF THE DIRECTIVE 2014/30/EU
    NF EN 301997-1 : 2002 TRANSMISSION AND MULTIPLEXING (TM) - MULTIPOINT EQUIPMENT - RADIO EQUIPMENT FOR USE IN MULTIMEDIA WIRELESS SYSTEMS (MWS) IN THE FREQUENCY BAND 40,5 GHZ TO 43,5 GHZ - PART 1: GENERAL REQUIREMENTS
    NF EN 301127 : 2002 FIXED RADIO SYSTEMS - POINT-TO-POINT EQUIPMENT - HIGH CAPACITY DIGITAL RADIO SYSTEMS CARRYING SDH SIGNALS (UP TO 2 X STM-1) IN FREQUENCY BANDS WITH ABOUT 30 MHZ CHANNEL SPACING AND USING CO-POLAR ARRANGEMENTS OR CO-CHANNEL DUAL POLARIZED (CCDP) OPERATION
    NF ETS 300 407 : 1998 TRANSMISSION AND MULTIPLEXING (TM) - PARAMETERS FOR DIGITAL RADIO RELAY SYSTEMS (DRRS) FOR THE TRANSMISSION OF DIGITAL SIGNALS AND ANALOGUE VIDEO SIGNALS OPERATING AROUND 55 GHZ
    DIN ETS 300197 : 95 AMD 2 98 TRANSMISSION AND MULTIPLEXING (TM) - PARAMETERS FOR RADIO-RELAY SYSTEMS FOR THE TRANSMISSION OF DIGITAL SIGNALS AND ANALOGUE VIDEO SIGNALS OPERATING AT 38 GHZ
    TS 102 123 : 1.2.1 BROADBAND RADIO ACCESS NETWORKS (BRAN); HIPERACCESS; RADIO CONFORMANCE TEST SPECIFICATION
    NF EN 300198 : 2006 FIXED RADIO SYSTEMS - POINT-TO-POINT EQUIPMENT - PARAMETERS FOR RADIO SYSTEMS FOR THE TRANSMISSION OF DIGITAL SIGNALS OPERATING AT 23 GHZ
    ES 202 336-12 : 1.1.1 ENVIRONMENTAL ENGINEERING (EE); MONITORING AND CONTROL INTERFACE FOR INFRASTRUCTURE EQUIPMENT (POWER, COOLING AND BUILDING ENVIRONMENT SYSTEMS USED IN TELECOMMUNICATION NETWORKS); PART 12: ICT EQUIPMENT POWER, ENERGY AND ENVIRONMENTAL PARAMETERS MONITORING INFORMATION MODEL
    05/30133440 DC : DRAFT MAY 2005 EN 50310 ED 2 - APPLICATION OF EQUIPOTENTIAL BONDING AND EARTHING IN BUILDINGS WITH INFORMATION TECHNOLOGY EQUIPMENT
    TS 102 121 : 1.3.1 ENVIRONMENTAL ENGINEERING (EE); POWER DISTRIBUTION TO TELECOMMUNICATIONS AND DATACOM (ICT) EQUIPMENT
    SCTE 203 : 2014 PRODUCT ENVIRONMENTAL REQUIREMENTS FOR CABLE TELECOMMUNICATIONS FACILITIES - TEST METHODS
    TR 102 271 : 1.1.1 BROADBAND RADIO ACCESS NETWORKS (BRAN); HIPERACCESS; RECOMMENDATIONS ON ESSENTIAL RADIO PARAMETERS TO BE INCLUDED IN EN 302 326
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective