Skip to content
Please enter a keyword to search

  • I.S. EN IEC 61291-1:2018

    Current The latest, up-to-date edition.

    OPTICAL AMPLIFIERS - PART 1: GENERIC SPECIFICATION

    Available format(s): 

    Language(s): 

    Published date:  13-05-2018

    Publisher:  National Standards Authority of Ireland

    For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
    Only cited Standards give presumption of conformance to New Approach Directives/Regulations.

    Dates of withdrawal of national standards are available from NSAI.

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    National Foreword
    FOREWORD
    1 Scope
    2 Normative references
    3 Terms, definitions and abbreviated terms
    4 Requirements
    5 Quality assessment
    6 Electromagnetic compatibility (EMC) requirements
    7 Test methods
    Bibliography
    Annex ZA (normative) - Normative references to
             international publications with their
             corresponding European publications

    Abstract - (Show below) - (Hide below)

    Pertains to all commercially available optical amplifiers (OAs) and optically amplified assemblies.

    General Product Information - (Show below) - (Hide below)

    Development Note Supersedes I.S. EN 61291-1. For CENELEC adoptions of IEC publications, please check www.iec.ch to be sure that you have any corrigenda that may apply. (05/2018)
    Document Type Standard
    Publisher National Standards Authority of Ireland
    Status Current

    Standards Referencing This Book - (Show below) - (Hide below)

    IEC 61290-3-2:2008 Optical amplifiers - Test methods - Part 3-2: Noise figure parameters - Electrical spectrum analyzer method
    IEC 60825-2:2004+AMD1:2006+AMD2:2010 CSV Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS)
    IEC 61290-10-4:2007 Optical amplifiers - Test methods - Part 10-4: Multichannel parameters - Interpolated source subtraction method using an optical spectrum analyzer
    IEC 60050-731:1991 International Electrotechnical Vocabulary (IEV) - Part 731: Optical fibre communication
    IEC 61290-10-5:2014 Optical amplifiers - Test methods - Part 10-5: Multichannel parameters - Distributed Raman amplifier gain and noise figure
    EN 61291-5-2:2017 Optical amplifiers - Part 5-2: Qualification specifications - Reliability qualification for optical fibre amplifiers
    IEC 61290-4-2:2011 Optical amplifiers - Test methods - Part 4-2: Gain transient parameters - Broadband source method
    IEC 61290-11-1:2008 Optical amplifiers - Test methods - Part 11-1: Polarization mode dispersion parameter - Jones matrix eigenanalysis (JME)
    IEC 60793-2:2015 Optical fibres - Part 2: Product specifications - General
    IEC 61290-1-3:2015 Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method
    EN 61290-7-1:2007 Optical amplifiers - Test methods - Part 7-1: Out-of-band insertion losses - Filtered optical power meter method
    EN 61290-5-2:2004 Optical amplifiers - Test methods - Part 5-2: Reflectance parameters - Electrical spectrum analyser method
    EN 61290-10-1:2009 Optical amplifiers - Test methods - Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer
    EN 61290-10-2:2008 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer
    IEC 60825-1:2014 Safety of laser products - Part 1: Equipment classification and requirements
    IEC 61290-6-1:1998 Optical fibre amplifiers - Basic specification - Part 6-1: Test methods for pump leakage parameters - Optical demultiplexer
    IEC 61290-1-1:2015 Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method
    EN 61290-1-3:2015 Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method
    EN 61290-10-3:2003 Optical amplifiers - Test methods - Part 10-3: Multichannel parameters - Probe methods
    EN 61290-5-3:2002 Optical fibre amplifiers - Basic specification - Part 5-3: Test methods for reflectance parameters - Reflectance tolerance using an electrical spectrum analyser
    EN 61290-5-1 : 2006 Optical amplifiers - Test methods - Part 5-1: Reflectance parameters - Optical spectrum analyzer method
    EN 61290-10-4:2007 Optical amplifiers - Test methods - Part 10-4: Multichannel parameters - Interpolated source subtraction method using an optical spectrum analyzer
    EN 61290-11-1:2008 Optical amplifiers - Test methods - Part 11-1: Polarization mode dispersion parameter - Jones matrix eigenanalysis (JME)
    IEC 61290-5-3:2002 Basic specification for optical amplifier test methods - Part 5-3: Test methods for reflectance parameters - Reflectance tolerance test method using electrical spectrum analyzer
    EN 61290-3-2:2008 Optical amplifiers - Test methods - Part 3-2: Noise figure parameters - Electrical spectrum analyzer method
    IEC 61290-5-2:2003 Optical amplifiers - Test methods - Part 5-2: Reflectance parameters - Electrical spectrum analyser method
    IEC 61290-7-1:2007 Optical amplifiers - Test methods - Part 7-1: Out-of-band insertion losses - Filtered optical power meter method
    IEC TR 61931:1998 Fibre optic - Terminology
    IEC 60874-1:2011 Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1: Generic specification
    EN 61290-10-5:2014 Optical amplifiers - Test methods - Part 10-5: Multichannel parameters - Distributed Raman amplifier gain and noise figure
    EN 61290-11-2:2005 Optical amplifiers - Test methods - Part 11-2: Polarization mode dispersion parameter - Poincaré sphere analysis method
    EN 61290-3-1:2003 Optical amplifiers - Test methods - Part 3-1: Noise figure parameters - Optical spectrum analyzer method
    IEC 61290-3-1:2003 Optical amplifiers - Test methods - Part 3-1: Noise figure parameters - Optical spectrum analyzer method
    IEC 61290-10-2:2007 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer
    IEC 61291-5-2:2017 Optical amplifiers - Part 5-2: Qualification specifications - Reliability qualification for optical fibre amplifiers
    EN 61290-4-1:2016 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method
    IEC 61290-3:2008 Optical amplifiers - Test methods - Part 3: Noise figure parameters
    IEC 61290-4-1:2016 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method
    IEC 61290-11-2:2005 Optical amplifiers - Test methods - Part 11-2: Polarization mode dispersion parameter - Poincaré sphere analysis method
    EN 61290-4-2:2011 Optical amplifiers - Test methods - Part 4-2: Gain transient parameters - Broadband source method
    IEC 61290-5-1:2006 Optical amplifiers - Test methods - Part 5-1: Reflectance parameters - Optical spectrum analyzer method
    EN 61290-1-2:2005 Optical amplifiers - Test methods - Part 1-2: Power and gain parameters - Electrical spectrum analyzer method
    EN 61290-4-3:2015 Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control
    IEC 61290-1-2:2005 Optical amplifiers - Test methods - Part 1-2: Power and gain parameters - Electrical spectrum analyzer method
    IEC 61290-10-1:2009 Optical amplifiers - Test methods - Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer
    IEC 61290-10-3:2002 Optical amplifiers - Test methods - Part 10-3: Multichannel parameters - Probe methods
    EN 61290-6-1:1998 Optical fibre amplifiers - Basic specification - Part 6-1: Test methods for pump leakage parameters - Optical demultiplexer
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective