BS EN 61235:1995
|
Live working. Insulating hollow tubes for electrical purposes |
NF EN 61229 : 96 AMD 2 2003
|
RIGID PROTECTIVE COVERS FOR LIVE WORKING ON A.C. INSTALLATIONS |
UNE-EN 60832-2:2011
|
Live working - Insulating sticks and attachable devices -- Part 2: Attachable devices |
CEI EN 60349-4 : 2014
|
ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 4: PERMANENT MAGNET SYNCHRONOUS ELECTRICAL MACHINES CONNECTED TO AN ELECTRONIC CONVERTER |
CEI EN 60027-7 : 2011
|
LETTER SYMBOLS TO BE USED IN ELECTRICAL TECHNOLOGY - PART 7: POWER GENERATION, TRANSMISSION AND DISTRIBUTION |
12/30240603 DC : 0
|
BS EN 60320-1 ED 3.0 - APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 1: GENERAL REQUIREMENTS |
CEI EN 55016-2-2 : 2012
|
SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 2-2: METHODS OF MEASUREMENT OF DISTURBANCES AND IMMUNITY - MEASUREMENT OF DISTURBANCE POWER |
CEI EN 62193 : 2005
|
LIVE WORKING - TELESCOPIC STICKS AND TELESCOPIC MEASURING STICKS |
DD ISO/TS 16952-1:2007
|
Technical product documentation. Reference designation system General application rules |
BS EN 60349-1:2010
|
Electric traction. Rotating electrical machines for rail and road vehicles Machines other than electronic converter-fed alternating current motors |
BS EN 60404-14:2002
|
Magnetic materials Methods of measurement of the magnetic dipole moment of a ferromagnetic material specimen by the withdrawal or rotation method |
BS EN 62022:2007
|
Installed monitors for the control and detection of gamma radiations contained in recyclable or non-recyclable materials transported by vehicles |
BS EN 62475:2010
|
High-current test techniques. Definitions and requirements for test currents and measuring systems |
BS EN 61148:2012
|
Terminal markings for valve device stacks and assemblies and for power conversion equipment |
BS EN 60903:2003
|
Live working. Gloves of insulating material |
CEI EN 61310-2 : 2008
|
SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 2: REQUIREMENTS FOR MARKING |
CEI 18-66 : 2013
|
ELECTRICAL INSTALLATIONS IN SHIPS - PART 509: OPERATION OF ELECTRICAL INSTALLATIONS |
CEI 57-25 : 1997
|
PERFORMANCE AND TESTING OF TELEPROTECTION EQUIPMENT OF POWER SYSTEMS - PART 2: ANALOGUE COMPARISON SYSTEMS |
BS ISO 14617-2:2002
|
Graphical symbols for diagrams Symbols having general application |
BS EN 50286:2001
|
Electrical insulating protective clothing for low-voltage installations |
02/204438 DC : 0
|
IEC 60855. ED.2 - LIVE WORKING - INSULATING FOAM-FILLED TUBES AND SOLID RODS |
BS EN 62683-1:2017
|
Low-voltage switchgear and controlgear. Product data and properties for information exchange Catalogue data |
16/30336300 DC : 0
|
BS EN 60799 - ELECTRICAL ACESSORIES - CORD SETS AND INTERCONNECTION CORD SETS |
BS EN 62488-2:2017
|
Power line communication systems for power utility applications Analogue power line carrier terminals or APLC |
13/30289140 DC : 0
|
BS EN 60364-9-1 ED 1.0 - LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 9-1: INSTALLATION DESIGN AND,,SAFETY REQUIREMENTS FOR PHOTOVOLTAIC POWER SYSTEMS (PV) |
UNE-HD 50573.5.57:2014
|
Co-ordination of electrical equipment for protection, isolation, switching and control |
BS EN 62924:2017
|
Railway applications. Fixed installations. Stationary energy storage system for DC traction systems |
07/30164535 DC : 0
|
BS EN 60974-8 - ARC WELDING EQUIPMENT - PART 8: GAS CONSOLES FOR WELDING AND PLASMA CUTTING SYSTEMS |
15/30314469 DC : 0
|
BS EN 62548 ED.1 - PHOTOVOLTAIC (PV) ARRAYS - DESIGN REQUIREMENTS |
10/30215734 DC : 0
|
BS EN 60974-7 - ARC WELDING EQUIPMENT - PART 7: TORCHES |
NF EN 60974-1 : 2012
|
ARC WELDING EQUIPMENT - PART 1: WELDING POWER SOURCES |
BS EN 60255-5:2001
|
Electrical relays Insulation coordination for measuring relays and protection equipment. Requirements and tests |
I.S. EN 60974-4:2016
|
ARC WELDING EQUIPMENT - PART 4: PERIODIC INSPECTION AND TESTING |
BS EN 62282-3-200:2016
|
Fuel cell technologies Stationary fuel cell power systems. Performance test methods |
BIS IS 15382-1 : 2014
|
INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS |
I.S. EN 61987-1:2007
|
INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 1: MEASURING EQUIPMENT WITH ANALOGUE AND DIGITAL OUTPUT |
04/30122740 DC : DRAFT SEP 2004
|
IEC 60974-4 - ARC WELDING EQUIPMENT - PART 4: SAFETY, MAINTENANCE AND INSPECTION OF ARC WELDING EQUIPMENT IN USE |
NFR 13 008-1 : 1999
|
ROAD VEHICLES - ELECTROMAGNETIC COMPATIBILITY TEST PROCEDURE OF MOTOR VEHICLES - PART 1: DEFINITIONS AND GENERALITIES |
11/30233201 DC : 0
|
BS EN 61009-1 - RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITH INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCBOS) - PART 1: GENERAL RULES |
NF EN 61481 : 2001 AMD 2 2005
|
LIVE WORKING - PORTABLE PHASE COMPARATORS FOR USE ON VOLTAGES FROM 1 KV TO 36 KV A.C. |
BS EN 61230:2008
|
Live working. Portable equipment for earthing or earthing and short-circuiting |
BS EN 81346-1:2009
|
Industrial systems, installations and equipment and industrial product. Structuring principles and reference designations Basic rules |
BS EN 61236:2011
|
Live working. Saddles, stick clamps and their accessories |
BS ISO 7637-1:2015
|
Road vehicles. Electrical disturbances from conduction and coupling Definitions and general considerations |
BS EN 61000-4-27 : 2001
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-27: TESTING AND MEASUREMENT TECHNIQUES - UNBALANCE, IMMUNITY TEST FOR EQUIPMENT WITH INPUT CURRENT NOT EXCEEDING 16 A PER PHASE |
97/208495 DC : DRAFT JUL 1997
|
IEC 61640 - HV GAS-INSULATED TRANSMISSION LINES FOR RATED VOLTAGES OF 72,5 KV AND ABOVE |
CEI EN 61850-7-420 : 2010
|
COMMUNICATION NETWORKS AND SYSTEMS FOR POWER UTILITY AUTOMATION - PART 7-420: BASIC COMMUNICATION STRUCTURE - DISTRIBUTED ENERGY RESOURCES LOGICAL NODES |
EN 60079-30-1:2017
|
Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements |
04/30117249 DC : DRAFT JUL 2004
|
IEC 60079-2 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 2: PRESSURIZED ENCLOSURES 'P' |
CEI EN 50328 : 2003
|
RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRONIC POWER CONVERTERS FOR SUBSTATIONS |
07/30161792 DC : 0
|
BS EN 61535 - INSTALLATION OF COUPLERS INTENDED FOR PERMANENT CONNECTIONS IN FIXED INSTALLATIONS |
CAN/CSA-C22.2 NO. 60896-21:17
|
Stationary lead-acid batteries — Part 21: Valve regulated types — Methods of test (Adopted IEC 60896-21:2004, first edition, 2004-02, with Canadian deviations) | Batteries stationnaires au plomb — Partie 21 : Types étanches à soupapes — Méthodes d’essai (norme IEC 60896-21:2004 adoptee, première édition, 2004-02, avec exigences propres au Canada) |
11/30244681 DC : 0
|
BS IEC 62706 - RADIATION PROTECTION INSTRUMENTATION - ENVIRONMENTAL, ELECTROMAGNETIC AND MECHANICAL PERFORMANCE REQUIREMENTS |
DIN V ENV 60349-2 : 1994
|
ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 2: ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS |
BS IEC 60532:2010
|
Radiation protection instrumentation. Installed dose rate meters, warning assemblies and monitors. X and gamma radiation of energy between 50 keV and 7 MeV |
EN 61243-1:2005/A1:2010
|
LIVE WORKING - VOLTAGE DETECTORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C. |
09/30207606 DC : 0
|
BS EN 61148 - TERMINAL MARKINGS FOR VALVE DEVICE STACKS AND ASSEMBLIES AND FOR POWER CONVERTER EQUIPMENT |
DD IEC/TS 62282-1:2005
|
Fuel cell technologies Terminology |
11/30235280 DC : 0
|
BS EN 50152-1 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - PARTICULAR REQUIREMENTS FOR ALTERNATING CURRENT SWITCHGEAR - PART 1: CIRCUIT-BREAKERS WITH NOMINAL VOLTAGE ABOVE 1 KV |
00/709272 DC : DRAFT MAY 2000
|
ISO/DIS 7637-1 - ROAD VEHICLES - ELECTRICAL INTERFERENCE BY CONDUCTION AND COUPLING - PART 1: DEFINITIONS AND GENERAL CONSIDERATIONS |
BS EN 61987-10:2009
|
Industrial-process measurement and control. Data structures and elements in process equipment catalogues Lists of properties (LOPs) for industrial-process measurement and control for electronic data exchange. Fundamentals |
BS IEC/IEEE 62271-37-013:2015
|
High-voltage switchgear and controlgear Alternating-current generator circuit-breakers |
PD IEC/TS 62344:2013
|
Design of earth electrode stations for high-voltage direct current (HVDC) links. General guidelines |
BS EN 61666:2010
|
Industrial systems, installations and equipment and industrial products. Identification of terminals within a system |
07/30150067 DC : 0
|
BS IEC 60846-1 - RADIATION PROTECTION INSTRUMENTATION - AMBIENT AND/OR DIRECTIONAL DOSE EQUIVALENT (RATE) METERS AND/OR MONITORS FOR BETA, X AND GAMMA RADIATION - PART 1: PORTABLE WORKPLACE AND ENVIRONMENTAL METERS AND MONITORS |
BS IEC 61111:1992
|
Matting of insulating material for electrical purposes |
PD IEC TR 62225:2001
|
Guidance on terms for connectors and mechanical structures in electronic equipment |
CEI EN 61534-1 : 2012
|
POWERTRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS |
DD IEC/TS 61968-2:2011
|
Application integration at electric utilities. System interfaces for distribution management Glossary |
BS EN 61478:2001
|
Live working. Ladders of insulating material |
CEI EN 62271-204 : 2012
|
HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 204: RIGID GAS-INSULATED TRANSMISSION LINES FOR RATED VOLTAGES ABOVE 52 KV |
10/30232077 DC : 0
|
BS EN 61236 ED 2 - LIVE WORKING - SADDLES, STICK CLAMPS AND THEIR ACCESSORIES |
15/30300722 DC : 0
|
BS ISO 7637-1 - ROAD VEHICLES - ELECTRICAL DISTURBANCES FROM CONDUCTION AND COUPLING - PART 1: DEFINITIONS AND GENERAL CONSIDERATIONS |
14/30257408 DC : 0
|
BS IEC/IEEE 62271-37-013 ED 1.0 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 37-013: ALTERNATING-CURRENT GENERATOR CIRCUIT-BREAKERS |
14/30269872 DC : 0
|
BS EN 61017 ED 1.0 - RADIATION PROTECTION INSTRUMENTATION - TRANSPORTABLE, MOBILE OR INSTALLED EQUIPMENT TO MEASURE PHOTON RADIATION FOR ENVIRONMENTAL MONITORING |
07/30162245 DC : 0
|
BS EN 60092-XXX - ELECTRICAL INSTALLATIONS IN SHIPS - PART XXX - OPERATION OF ELECTRICAL INSTALLATIONS |
I.S. EN 60895:2003
|
LIVE WORKING - CONDUCTIVE CLOTHING FOR USE AT NOMINAL VOLTAGE UP TO 800 KV A.C. AND +/- 600 KV D.C. |
BS EN 60051-1:2017
|
Direct acting indicating analogue electrical measuring instruments and their accessories Definitions and general requirements common to all parts |
BS EN 61287-1:2014
|
Railway applications. Power converters installed on board rolling stock Characteristics and test methods |
03/311404 DC : 0
|
IEC 61010-1 ED.3 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
NF EN 62020 : 1999 AMD 1 2005
|
ELECTRICAL ACCESSORIES - RESIDUAL CURRENT MONITORS FOR HOUSEHOLD AND SIMILAR USES (RCMS) |
BS EN 60027-4:2007
|
Letter symbols to be used in electric technology Rotating electric machines |
NF EN 62271-1 : 2017
|
HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: COMMON SPECIFICATIONS FOR ALTERNATING CURRENT SWITCHGEAR AND CONTROLGEAR |
01/200972 DC : DRAFT FEB 2001
|
IEC 61243-1 ED.2 - LIVE WORKING - VOLTAGE DETECTORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C. |
BS EN 61582:2006
|
Radiation protection instrumentation. In vivo counters. Classification, general requirements and test procedures for portable, transportable and installed equipment |
14/30312016 DC : 0
|
BS EN ISO/IEC 60079-13 - EXPLOSIVE ATMOSPHERES - PART 13: EQUIPMENT PROTECTION BY PRESSURIZED ROOM 'P' AND ARTIFICIALLY VENTILATED ROOM 'V' |
CEI EN 60269-6 : 2012
|
LOW-VOLTAGE FUSES - PART 6: SUPPLEMENTARY REQUIREMENTS FOR FUSE-LINKS FOR THE PROTECTION OF SOLAR PHOTOVOLTAIC ENERGY SYSTEMS |
08/30184169 DC : DRAFT JUNE 2008
|
BS EN 61243-3 - LIVE WORKING - VOLTAGE DETECTORS - PART 3: TWO-POLE LOW-VOLTAGE TYPE |
UNE-EN 61534-1:2011
|
Powertrack systems -- Part 1: General requirements |
BS EN 60871-1:2014
|
Shunt capacitors for a.c. power systems having a rated voltage above 1 000 V General |
04/30039291 DC : DRAFT NOV 2004
|
|
CEI EN 62551 : 2013
|
ANALYSIS TECHNIQUES FOR DEPENDABILITY - PETRI NET TECHNIQUES |
BS EN 60127-6:2014
|
Miniature fuses Fuse-holders for miniature fuse-links |
EN 61439-1:2011
|
Low-voltage switchgear and controlgear assemblies - Part 1: General rules |
DIN VDE 0800-1 : 1989
|
TELECOMMUNICATIONS - GENERAL CONCEPTS - REQUIREMENTS AND TESTS FOR THE SAFETY OF FACILITIES AND APPARATUS |
PREN 50152-3-2 : DRAFT 2015
|
RAILWAY APPLICATIONS - FIXED INSTALLATIONS - PARTICULAR REQUIREMENTS FOR A.C. SWITCHGEAR - PART 3-2: MEASUREMENT, CONTROL AND PROTECTION DEVICES FOR SPECIFIC USE IN A.C. TRACTION SYSTEMS - SINGLE-PHASE CURRENT TRANSFORMERS |
I.S. EN 55016-2-3:2017
|
SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 2-3: METHODS OF MEASUREMENT OF DISTURBANCES AND IMMUNITY - RADIATED DISTURBANCE MEASUREMENTS |
CSA ISO/IEC 15018 : 2005 : R2010
|
INFORMATION TECHNOLOGY - GENERIC CABLING FOR HOMES |
CAN/CSA-C22.2 NO. 60947-1-13 (R2018)
|
Low-voltage switchgear and controlgear - Part 1: General rules (Tri-national standard, with UL 60947-1 and NMX-J-515-ANCE) |
I.S. EN 81346-1:2009
|
INDUSTRIAL SYSTEMS, INSTALLATIONS AND EQUIPMENT AND INDUSTRIAL PRODUCTS - STRUCTURING PRINCIPLES AND REFERENCE DESIGNATIONS - PART 1: BASIC RULES |
CSA ISO/IEC 15018:2005
|
INFORMATION TECHNOLOGY - GENERIC CABLING FOR HOMES |
CSA ISO/IEC 15018 : 2005 : INC : AMD 1 : 2010 : R201000
|
INFORMATION TECHNOLOGY - GENERIC CABLING FOR HOMES |
CEI EN 50321 : 2000
|
ELECTRICALLY INSULATING FOOTWEAR FOR WORKING ON LOW VOLTAGE INSTALLATIONS |
CEI EN 60761-1 : 2005
|
EQUIPMENT FOR CONTINUOUS MONITORING RADIOACTIVITY IN GASEOUS EFFLUENTS - PART 1: GENERAL REQUIREMENTS |
CEI EN 61000-4-21 : 2014
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-21: TESTING AND MEASUREMENT TECHNIQUES - REVERBERATION CHAMBER TEST METHODS |
I.S. EN 62683-1:2017
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PRODUCT DATA AND PROPERTIES FOR INFORMATION EXCHANGE - PART 1: CATALOGUE DATA |
I.S. EN 61478:2002
|
LIVE WORKING - LADDERS OF INSULATING MATERIAL |
I.S. EN 60694:1999
|
COMMON SPECIFICATIONS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS |
IEC 61172:1992
|
Radiation protection instrumentation - Monitoring equipment - Radioactive aerosols in the environment |
EN 55016-2-3:2017
|
Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements |
CEI EN 61095 : 2010
|
ELECTROMECHANICAL CONTACTORS FOR HOUSEHOLD AND SIMILAR PURPOSES |
I.S. EN 60404-1:2017
|
MAGNETIC MATERIALS - PART 1: CLASSIFICATION |
I.S. EN 62282-3-2:2006
|
FUEL CELL TECHNOLOGIES - PART 3-2: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS |
EN 62683-1:2017
|
Low-voltage switchgear and controlgear - Product data and properties for information exchange - Part 1: Catalogue data |
BS EN 50539-11 : 2013
|
LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 11: REQUIREMENTS AND TESTS FOR SPDS IN PHOTOVOLTAIC APPLICATIONS |
EN 62271-1:2017
|
High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear |
IEC 60669-1 REDLINE : 4ED 2017
|
SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS |
I.S. EN 62282-3-200:2016
|
FUEL CELL TECHNOLOGIES - PART 3-200: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS |
CSA C22.2 No. 62282-2 : 2007 : R2013
|
FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES |
BIS IS/IEC 60079-2 : 2007
|
EXPLOSIVE ATMOSPHERES - PART 2: EQUIPMENT PROTECTION BY PRESSURIZED ENCLOSURE 'P' |
I.S. EN 62271-200:2012
|
HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 200: A.C. METAL-ENCLOSED SWITCHGEAR AND CONTROLGEAR FOR RATED VOLTAGES ABOVE 1 KV AND UP TO AND INCLUDING 52 KV (IEC 62271-200:2011 (EQV)) |
I.S. CLC/TS 61112:2006
|
BLANKETS OF INSULATING MATERIAL FOR ELECTRICAL PURPOSES |
UNE-EN 60255-11:2010
|
Measuring relays and protection equipment - Part 11: Voltage dips, short interruptions, variations and ripple on auxiliary power supply port |
CEI EN 50508 : 2009
|
MULTI-PURPOSE INSULATING STICKS FOR ELECTRICAL OPERATIONS ON HIGH VOLTAGE INSTALLATIONS |
CEI EN 50365 : 2004
|
ELECTRICALLY INSULATING HELMETS FOR USE ON LOW VOLTAGE INSTALLATIONS |
NFC 01 841 : 2005
|
ELECTROTECHNICAL VOCABULARY - PART 841: INDUSTRIAL ELECTRO HEAT |
IEC PAS 62271-109:2002
|
High-voltage switchgear and controlgear - Part 109: Alternating-current series capacitor by-pass switches |
ISO/IEC 14763-2:2012
|
Information technology Implementation and operation of customer premises cabling Part 2: Planning and installation |
I.S. EN 61219:1994
|
LIVE WORKING - EARTHING OR EARTHING AND SHORT-CIRCUITING EQUIPMENT USING LANCES AS A SHORT-CIRCUITING DEVICE - LANCE EARTHING |
I.S. EN 60404-8-1:2015
|
MAGNETIC MATERIALS - PART 8-1: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - MAGNETICALLY HARD MATERIALS |
I.S. EN 62488-2:2017
|
POWER LINE COMMUNICATION SYSTEMS FOR POWER UTILITY APPLICATIONS - PART 2: ANALOGUE POWER LINE CARRIER TERMINALS OR APLC |
I.S. EN 60127-6:2014
|
MINIATURE FUSES - PART 6: FUSE-HOLDERS FOR MINIATURE FUSE-LINKS |
I.S. EN 50152-3-3:2016
|
RAILWAY APPLICATIONS - FIXED INSTALLATIONS - PARTICULAR REQUIREMENTS FOR A.C. SWITCHGEAR - PART 3-3: MEASUREMENT, CONTROL AND PROTECTION DEVICES FOR SPECIFIC USE IN A.C. TRACTION SYSTEMS - VOLTAGE TRANSFORMERS |
CSA C22.2 No. 61058.1 : 2009 : R2014
|
SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
IEC 60950:1999
|
Safety of information technology equipment |
I.S. EN 60495:1994
|
SINGLE SIDEBAND POWER-LINE CARRIER TERMINALS |
UNE-EN 61287-1:2015
|
Railway applications - Power converters installed on board rolling stock - Part 1: Characteristics and test methods |
UNE-IEC 60050-851:2010
|
International Electrotechnical Vocabulary (IEV) - Part 851: Electric welding |
I.S. EN 50328:2007
|
RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRONIC POWER CONVERTERS FOR SUBSTATIONS |
I.S. EN 50522:2010
|
EARTHING OF POWER INSTALLATIONS EXCEEDING 1 KV A.C. |
CSA C22.2 No. 61010.1 : 2012 : INC : UPD 1 :2015
|
SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
IEC 60050-581:2008
|
International Electrotechnical Vocabulary (IEV) - Part 581: Electromechanical components for electronic equipment |
IEC 61851-1:2017
|
Electric vehicle conductive charging system - Part 1: General requirements |
AAMI ES60601-1 : 2005 : INC : AMD 1 : 2012 : R201200
|
MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD) |
AAMI ES60601-1 : 2005 : INC : AMD 2 : 2012 : R201200
|
MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD) |
AAMI ES60601-1 : 2005 : R2012
|
MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD) |
IEC 61010-031:2015 RLV
|
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test |
CAN/CSA-C22.2 NO. 61010-031:17
|
Safety requirements for electrical equipment for measurement, control and laboratory use Part 031: Safety requirements for hand-held and hand-manipulated probe assemblies for electrical test and measurement (Binational standard with UL 61010-031) |
08/30177777 DC : DRAFT FEB 2008
|
BS EN 62548 - INSTALLATION AND SAFETY REQUIREMENTS FOR PHOTOVOLTAIC (PV) GENERATORS |
09/30162904 DC : 0
|
BS EN 61204-3 - LOW-VOLTAGE POWER SUPPLIES, D.C. OUTPUT - PART 3: ELECTROMAGNETIC COMPATIBILITY (EMC) |
IEC 61230:2008
|
Live working - Portable equipment for earthing or earthing and short-circuiting |
BS EN 60950:2000
|
Safety of information technology equipment |
BS EN 50522:2010
|
Earthing of power installations exceeding 1 kV a.c. |
BS ISO 7176-14:2008
|
Wheelchairs Power and control systems for electrically powered wheelchairs and scooters. Requirements and test methods |
IEC 60139:2000
|
Preparation of outline drawings for cathode-ray tubes, their components, connections and gauges |
IEC 60694:1996+AMD1:2000+AMD2:2001 CSV
|
Common specifications for high-voltage switchgear and controlgear standards |
IEC 60974-13:2011
|
Arc welding equipment - Part 13: Welding clamp |
16/30282633 DC : 0
|
BS EN 50155 - RAILWAY APPLICATIONS - ELECTRONIC EQUIPMENT USED ON ROLLING STOCK |
EN 50178:1997
|
Electronic equipment for use in power installations |
EN 60896-22:2004
|
Stationary lead-acid batteries - Part 22: Valve regulated types - Requirements |
EN 60974-8:2009
|
Arc welding equipment - Part 8: Gas consoles for welding and plasma cutting systems |
EN 60404-1:2017
|
Magnetic materials - Part 1: Classification |
EN 61243-3:2014/AC:2015
|
LIVE WORKING - VOLTAGE DETECTORS - PART 3: TWO-POLE LOW-VOLTAGE TYPE |
EN 60855:1996
|
Insulating foam-filled tubes and solid rods for live working |
EN 50365:2002
|
Electrically insulating helmets for use on low voltage installations |
EN 61479:2001/A1:2002
|
LIVE WORKING - FLEXIBLE CONDUCTOR COVERS (LINE HOSES) OF INSULATING MATERIAL |
EN 60909-0:2016
|
Short-circuit currents in three-phase a.c. systems - Part 0: Calculation of currents |
EN 60832:1996
|
Insulating poles (insulating sticks) and universal tool attachments (fittings) for live working |
EN 60694:1996/A2:2001
|
COMMON SPECIFICATIONS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS |
EN 60974-4:2016
|
Arc welding equipment - Part 4: Periodic inspection and testing |
EN 61582:2006
|
Radiation protection instrumentation - In vivo counters - Classification, general requirements and test procedures for portable, transportable and installed equipment |
EN 61058-1:2002/A2:2008
|
SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
EN 62282-2:2012
|
Fuel cell technologies - Part 2: Fuel cell modules |
IEC 61204-3:2016 RLV
|
Low-voltage switch mode power supplies - Part 3: Electromagnetic compatibility (EMC) |
EN 62271-109:2009/A1:2013
|
HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 109: ALTERNATING-CURRENT SERIES CAPACITOR BY-PASS SWITCHES (IEC 62271-109:2008/A1:2013) |
EN 50539-11 : 2013 AMD 1 2014
|
LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 11: REQUIREMENTS AND TESTS FOR SPDS IN PHOTOVOLTAIC APPLICATIONS |
EN 61478:2001/A1:2003
|
LIVE WORKING - LADDERS OF INSULATING MATERIAL |
EN 50286:1999/corrigendum:2004
|
ELECTRICAL INSULATING PROTECTIVE CLOTHING FOR LOW-VOLTAGE INSTALLATIONS |
EN 61235:1995
|
Live working - Insulating hollow tubes for electrical purposes |
EN 60974-12:2011
|
Arc welding equipment - Part 12: Coupling devices for welding cables |
EN 61000-4-27:2000/A1:2009
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-27: TESTING AND MEASUREMENT TECHNIQUES - UNBALANCE, IMMUNITY TEST FOR EQUIPMENT WITH INPUT CURRENT NOT EXCEEDING 16 A PER PHASE |
EN 60896-2:1996
|
Stationary lead-acid batteries - General requirements and methods of test - Part 2: Valve regulated types |
EN 50152-3-3:2016
|
Railway applications - Fixed installations - Particular requirements for a.c. switchgear - Part 3-3: Measurement, control and protection devices for specific use in a.c. traction systems - Voltage transformers |
EN 61131-2:2007
|
Programmable controllers - Part 2: Equipment requirements and tests |
EN 62310-2:2007
|
Static transfer systems (STS) - Part 2: Electromagnetic compatibility (EMC) requirements |
EN 61850-7-420:2009
|
Communication networks and systems for power utility automation - Part 7-420: Basic communication structure - Distributed energy resources logical nodes |
EN 62282-3-200:2016
|
Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test methods |
EN 60298:1996/A11:1999
|
A.C. METAL-ENCLOSED SWITCHGEAR AND CONTROLGEAR FOR RATED VOLTAGES ABOVE 1 KV AND UP TO AND INCLUDING 52 KV |
EN 62683:2015
|
Low-voltage switchgear and controlgear - Product data and properties for information exchange |
EN 62086-1:2005
|
Electrical apparatus for explosive gas atmospheres - Electrical resistance trace heating - Part 1: General and testing requirements |
EN 61219:1993
|
Live working - Earthing or earthing and short-circuiting equipment using lances as short-circuiting device - Lance earthing |
EN 55016-2-2:2011
|
Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-2: Methods of measurement of disturbances and immunity - Measurement of disturbance power |
EN 61230:2008
|
LIVE WORKING - PORTABLE EQUIPMENT FOR EARTHING OR EARTHING AND SHORT-CIRCUITING |
EN 50152-3-2:2016
|
Railway applications - Fixed installations - Particular requirements for a.c. switchgear - Part 3-2: Measurement, control and protection devices for specific use in a.c. traction systems - Current transformers |
EN 62475 : 2010
|
HIGH-CURRENT TEST TECHNIQUES - DEFINITIONS AND REQUIREMENTS FOR TEST CURRENTS AND MEASURING SYSTEMS |
EN 61229:1995/A2:2002
|
RIGID PROTECTIVE COVERS FOR LIVE WORKING ON A.C. INSTALLATIONS |
EN 60495:1994
|
Single sideband power-line carrier terminals |
EN 60255-5:2001
|
Electrical relays - Part 5: Insulation coordination for measuring relays and protection equipment - Requirements and tests |
BS EN 60974-8:2009
|
Arc welding equipment Gas consoles for welding and plasma cutting systems |
BS EN 61709:2017
|
Electric components. Reliability. Reference conditions for failure rates and stress models for conversion |
CEI EN 62076 : 2007
|
INDUSTRIAL ELECTROHEATING INSTALLATIONS - TEST METHODS FOR INDUCTION CHANNEL AND INDUCTION CRUCIBLE FURNACES |
02/209442 DC : DRAFT AUG 2002
|
IEC 60896-11 ED.1 - STATIONARY LEAD-ACID BATTERIES - PART 11: VENTED TYPES - GENERAL REQUIREMENTS AND METHODS OF TESTS |
NF EN 61098 : 2008
|
RADIATION PROTECTION INSTRUMENTATION - INSTALLED PERSONNEL SURFACE CONTAMINATION MONITORING ASSEMBLIES |
14/30295890 DC : 0
|
BS EN 1330-1 - NON-DESTRUCTIVE TESTING - TERMINOLOGY - PART 1: LIST OF GENERAL TERMS |
BS IEC 60325:2002
|
Radiation protection instrumentation. Alpha, beta and alpha/beta (beta energy > 60 keV) contamination meters and monitors |
06/30157062 DC : 0
|
BS EN 62310-3 - STATIC TRANSFER SYSTEMS (STS) - PART 3: METHOD OF SPECIFYING THE PERFORMANCE AND TEST REQUIREMENTS |
UNE-EN 62271-204:2012
|
High-voltage switchgear and controlgear - Part 204: Rigid gas-insulated transmission lines for rated voltage above 52 kV |
ESI 43-92 : ISSUE 2 AMD 1
|
CONDUCTOR FITTINGS FOR OVERHEAD LINES |
IEC TS 61000-5-8:2009
|
Electromagnetic compatibility (EMC) - Part 5-8: Installation and mitigation guidelines - HEMP protection methods for the distributed infrastructure |
14/30279327 DC : 0
|
BS EN 61800-3 AMD2 - ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS |
UNE-EN 50152-2:2013
|
Railway applications - Fixed installations - Particular requirements for alternating current switchgear - Part 2: Disconnectors, earthing switches and switches with nominal voltage above 1 kV |
BS AU 243-1:1991
|
Methods of test for electrical disturbance by conduction and coupling General |
UNE-EN 62504:2015
|
General lighting - Light emitting diode (LED) products and related equipment - Terms and definitions |
CEI EN 60079-13 : 2011
|
EXPLOSIVE ATMOSPHERES - PART 13: EQUIPMENT PROTECTION BY PRESSURIZED ROOMS 'P' |
I.S. EN 60761-1:2004
|
EQUIPMENT FOR CONTINUOUS MONITORING RADIOACTIVITY IN GASEOUS EFFLUENTS - PART 1: GENERAL REQUIREMENTS |
00/716717 DC : DRAFT NOV 2000
|
|
I.S. EN 61987-10:2009
|
INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 10: LISTS OF PROPERTIES (LOPS) FOR INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL FOR ELECTRONIC DATA EXCHANGE - FUNDAMENTALS |
I.S. EN 61666:2010
|
INDUSTRIAL SYSTEMS, INSTALLATIONS AND EQUIPMENT AND INDUSTRIAL PRODUCTS - IDENTIFICATION OF TERMINALS WITHIN A SYSTEM |
NF EN 60903 : 2004
|
SPECIFICATION FOR GLOVES AND MITTS OF INSULATING MATERIAL FOR LIVE WORKING |
BS EN 61095:1993
|
Specification for electromechanical contactors for household and similar purposes |
17/30361394 DC : 0
|
BS EN 50174-1 - INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 1: INSTALLATION SPECIFICATION AND QUALITY ASSURANCE |
NF EN 60974-11 : 2011
|
ARC WELDING EQUIPMENT - PART 11: ELECTRODE HOLDERS |
00/244020 DC : DRAFT SEP 2000
|
IEC 61800-3 ED.2 - ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS PRODUCT STANDARD INCLUDING SPECIFIC TEST METHODS |
BS EN 60349-4:2013
|
Electric traction. Rotating electrical machines for rail and road vehicles Permanent magnet synchronous electrical machines connected to an electronic converter |
02/202973 DC : 0
|
IEC 60832-2. ED.2 - LIVE WORKING - INSULATING STICKS AND ATTACHABLE UNIVERSAL DEVICES (FITTINGS) - PART 2: ATTACHABLE UNIVERSAL DEVICES (FITTINGS) |
BS EN 60832-2:2010
|
Live working. Insulating sticks and attachable devices Attachable devices |
14/30280137 DC : 0
|
BS EN 62282-3-200 ED 2.0 - FUEL CELL TECHNOLOGIES - PART 3-200: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS |
BS EN 60694:1997
|
Common specifications for high-voltage switchgear and controlgear standards |
PD ISO/TS 81346-3:2012
|
Industrial systems, installations and equipment and industrial products. Structuring principles and reference designations Application rules for a reference designation system |
BS EN 60799:1998
|
Electrical accessories. Cord sets and interconnection cord sets |
NF EN 60027-7 : 2011
|
LETTER SYMBOLS TO BE USED IN ELECTRICAL TECHNOLOGY - PART 7: POWER GENERATION, TRANSMISSION AND DISTRIBUTION |
BS IEC 60761-1 : 2002 AMD 15427
|
EQUIPMENT FOR CONTINUOUS MONITORING OF RADIOACTIVITY IN GASEOUS EFFLUENTS - PART 1: GENERAL REQUIREMENTS |
BS EN 61318:2008
|
Live working. Conformity assessment applicable to tools, devices and equipment |
BS EN 61243-1 : 2005
|
LIVE WORKING - VOLTAGE DETECTORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C. |
14/30297921 DC : 0
|
BS EN 62040-5-3 - UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 5-3: METHOD OF SPECIFYING THE PERFORMANCE AND TEST REQUIREMENTS FOR D.C. UPS |
02/206916 DC : DRAFT MAY 2002
|
IEC 62237. ED.1 - LIVE WORKING - INSULATING HOSES FOR USE WITH HYDRAULIC TOOLS AND EQUIPMENT |
CEI EN 62491 : 2009
|
INDUSTRIAL SYSTEMS, INSTALLATIONS AND EQUIPMENT AND INDUSTRIAL PRODUCTS - LABELLING OF CABLES AND CORES |
14/30282391 DC : 0
|
BS EN 60404-5 ED 3.0 - MAGNETIC MATERIALS - PART 5: PERMANENT MAGNET (MAGNETICALLY HARD) MATERIALS - METHODS OF MEASUREMENT OF MAGNETIC PROPERTIES |
BS EN 61310-2:2008
|
Safety of machinery. Indication, marking and actuation Requirements for marking |
I.S. EN 62551:2012
|
ANALYSIS TECHNIQUES FOR DEPENDABILITY - PETRI NET TECHNIQUES (IEC 62551:2012 (EQV)) |
NF EN 61478 : 2002 AMD 1 2004
|
LIVE WORKING - LADDERS OF INSULATING MATERIAL |
IEC 60974-8:2009
|
Arc welding equipment - Part 8: Gas consoles for welding and plasma cutting systems |
BS EN 60974-13:2011
|
Arc welding equipment Welding clamp |
16/30296085 DC : 0
|
BS EN 60077-2 ED. 2.0 - RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 2: ELECTROTECHNICAL COMPONENTS - GENERAL RULES |
I.S. EN 60051-1:2017
|
DIRECT ACTING INDICATING ANALOGUE ELECTRICAL MEASURING INSTRUMENTS AND THEIR ACCESSORIES - PART 1: DEFINITIONS AND GENERAL REQUIREMENTS COMMON TO ALL PARTS - PROPOSED HORIZONTAL STANDARD |
UNE-EN 62551:2014
|
Analysis techniques for dependability - Petri net techniques |
BS EN 61800-4:2003
|
Adjustable speed electrical power drive systems General requirements. Rating specifications for a.c. power drive systems above 1000 V a.c. and not exceeding 35 kV |
DIN 6779-12:2011-04
|
Structuring principles for technical products and technical product documentation - Part 12: Buildings and building technology |
04/30117615 DC : DRAFT AUG 2004
|
IEC 61310-2 - SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 2: REQUIREMENTS FOR MARKING |
08/30195422 DC : 0
|
BS EN 60974-4 - ARC WELDING EQUIPMENT - PART 4: PERIODIC INSPECTION AND TESTING |
BS EN 55016-2-2:2004
|
Specification for radio disturbance and immunity measuring apparatus and methods Methods of measurement of disturbances and immunity - Measurement of disturbance power |
IEC 61560:1998
|
Radiation protection instrumentation - Apparatus for non-destructive radiation tests of fur and other cloth samples |
EN 60079-13:2017
|
Explosive atmospheres - Part 13: Equipment protection by pressurized room "p" and artificially ventilated room "v" |
BS EN 60664-1:2007
|
Insulation coordination for equipment within low-voltage systems Principles, requirements and tests |
NF EN 61204-3 : 2001
|
LOW VOLTAGE POWER SUPPLIES, D.C. OUTPUT - PART 3: ELECTROMAGNETIC COMPATIBILITY (EMC) |
PD IEC/TS 62735-1:2015
|
Direct current (DC) plugs and socket-outlets for information and communication technology (ICT) equipment installed in data centres and telecom central offices Plug and socket-outlet system for 2,6 kW |
BS EN 61800-3 : 2004
|
ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS |
95/206959 DC : 0
|
IEC 61540 - PORTABLE RESIDUAL CURRENT DEVICES WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USE (PRCD'S) |
04/30125819 DC : DRAFT NOV 2004
|
|
BS EN 61479:2001
|
Live working. Flexible conductor covers (line hoses) of insulating material |
10/30227237 DC : 0
|
BS EN 62488-1 - PLANNING OF ANALOGUE AND DIGITAL POWER LINE CARRIER SYSTEMS - PART 1: OPERATING OVER EHV/HV/MV ELECTRICITY GRIDS |
UNE-EN 60974-11:2011
|
Arc welding equipment -- Part 11: Electrode holders |
13/30291052 DC : 0
|
BS EN 62873-2 ED 1.0 - DEFINITIONS - GLOSSARY FOR RCDS |
BS EN 60068-2-65:2013
|
Environmental testing Tests. Test Fg: Vibration. Acoustically induced method |
09/30184127 DC : 0
|
BS EN 61709 - ELECTRONIC COMPONENTS - RELIABILITY - REFERENCE CONDITIONS FOR FAILURE RATES AND STRESS MODELS FOR CONVERSION |
BS EN 50508:2009
|
Multi-purpose insulating sticks for electrical operations on high voltage installations |
CEI 23-95 : 2010
|
RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITH INTEGRAL OVERCURRENT PROTECTION INCORPORATED IN OR TO BE ASSOCIATED WITH FIXED SOCKET-OUTLETS (SRCBOS) |
I.S. EN 61800-3:2005
|
ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS (IEC 61800-3:2004 (EQV)) |
I.S. EN 60832-2:2010
|
LIVE WORKING - INSULATING STICKS AND ATTACHABLE DEVICES - PART 2: ATTACHABLE DEVICES |
18/30368743 DC (published 2018-04)
|
BS EN 60947-6-2. Low-voltage switchgear and controlgear Part 6-2. Multiple function equipment. Control and protective switching devices (or equipment) (CPS) |
07/30166815 DC : 0
|
BS EN 60068-2-65 AMD1 - ENVIRONMENTAL TESTING - PART 2-65: METHODS OF TEST - TEST FG - VIBRATION, ACOUSTICALLY INDUCED |
DD ENV 61111:2002
|
Matting of insulating material for electrical purposes |
BS EN 62193:2003
|
Live working. Telescopic sticks and telescopic measuring sticks |
CEI 23-97 : 2010
|
SOCKET-OUTLETS INTERLOCKED WITH A CIRCUIT BREAKER FOR OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (PIA) |
CEI EN 60664-1 : 2008
|
INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS |
BS 7741(1994) : AMD 8959
|
SPECIFICATION FOR INSULATING HOLLOW TUBES FOR ELECTRICAL PURPOSES |
09/30205410 DC : 0
|
BS EN 62271-204 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 204: RIGID HIGH-VOLTAGE, GAS-INSULATED TRANSMISSION LINES FOR RATED VOLTAGES OF 72,5 KV AND ABOVE |
15/30310531 DC : 0
|
BS EN 61709 ED 3.0 - ELECTRIC COMPONENTS - RELIABILITY - REFERENCE CONDITIONS FOR FAILURE RATES AND STRESS MODELS FOR CONVERSION |
16/30328917 DC : DRAFT APR 2016
|
BS EN 62488-2 ED 1.0 - POWER LINE COMMUNICATION SYSTEMS FOR POWER UTILITY APPLICATIONS - PART 2: ANALOGUE POWER LINE CARRIER TERMINALS (APLC) |
BS EN 50237:2000
|
Gloves and mitts with mechanical protection for electrical purposes |
CEI EN 60834-1 : 2001
|
TELEPROTECTION EQUIPMENT OF POWER SYSTEMS - PERFORMANCE AND TESTING - PART 1: COMMAND SYSTEMS |
CEI EN 60068-2-65 : 2013
|
ENVIRONMENTAL TESTING - PART 2-65: TESTS - TEST FG: VIBRATION - ACOUSTICALLY INDUCED METHOD |
04/30111859 DC : 0
|
IEC 62271-1 - HIGH-VOLTAGE SWITCHGEAR AND CONTROL GEAR - PART 1: COMMON SPECIFICATIONS |
07/30065083 DC : DRAFT JUNE 2007
|
BS EN 60027-4 - LETTER SYMBOLS TO BE USED IN ELECTRICAL TECHNOLOGY - PART 4: ROTATING ELECTRIC MACHINES |
12/30270636 DC : 0
|
BS EN 60909-0 - SHORT-CIRCUIT CURRENTS IN THREE-PHASE A.C. SYSTEMS - PART 0: CALCULATION OF CURRENTS |
CEI EN 61148 : 2012
|
TERMINAL MARKINGS FOR VALVE DEVICE STACKS AND ASSEMBLIES AND FOR POWER CONVERSION EQUIPMENT |
BS EN 60895:2003
|
Live working. Conductive clothing for use at a nominal voltage up to 800 kV a.c. and ± 600 kV d.c. |
BS EN 50178:1998
|
Electronic equipment for use in power installations |
BS EN 61229:1996
|
Rigid protective covers for live working on a.c. installations |
CEI EN 60974-12 : 2012
|
ARC WELDING EQUIPMENT - PART 12: COUPLING DEVICES FOR WELDING CABLES |
CEI EN 60974-8 : 2011
|
ARC WELDING EQUIPMENT - PART 8: GAS CONSOLES FOR WELDING AND PLASMA CUTTING SYSTEMS |
BS EN 50321:2000
|
Electrically insulating footwear for working on low voltage installations |
CEI EN 61526 : 2013
|
RADIATION PROTECTION INSTRUMENTATION - MEASUREMENT OF PERSONAL DOSE EQUIVALENTS HP(10) AND HP(0,07) FOR X, GAMMA, NEUTRON AND BETA RADIATIONS - DIRECT READING PERSONAL DOSE EQUIVALENT METERS |
IEC TR 60664-2-1:2011
|
Insulation coordination for equipment within low-voltage systems - Part 2-1: Application guide - Explanation of the application of the IEC 60664 series, dimensioning examples and dielectric testing |
PD 6524:1989
|
Guide to specifying permissible temperature and temperature rise for parts of electrical equipment, in particular for terminals |
CEI EN 62488-1 : 2013
|
POWER LINE COMMUNICATION SYSTEMS FOR POWER UTILITY APPLICATIONS - PART 1: PLANNING OF ANALOGUE AND DIGITAL POWER LINE CARRIER SYSTEMS OPERATING OVER EHV/HV/MV ELECTRICITY GRIDS |
CEI EN 60077-1 : 2002
|
RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 1: GENERAL SERVICE CONDITIONS AND GENERAL RULES |
BS IEC 60404-1:2000
|
Magnetic materials Classification |
EN IEC 61058-1:2018
|
Switches for appliances - Part 1: General requirements |
PREN 61009-1 : DRAFT 2011
|
RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITH INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCBOS) - PART 1: GENERAL RULES |
IEC 61363-1:1998
|
Electrical installations of ships and mobile and fixed offshore units - Part 1: Procedures for calculating short-circuit currents in three-phase a.c. |
IEC 61526:2010
|
Radiation protection instrumentation - Measurement of personal dose equivalents Hp(10) and Hp(0,07) for X, gamma, neutron and beta radiations - Direct reading personal dose equivalent meters |
CSA C22.2 No. 61010.1 :2012
|
SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
IEC 60092-509:2011
|
Electrical installations in ships - Part 509: Operation of electrical installations |
IEC 61263:1994
|
Radiation protection instrumentation - Portable potential alpha energy meter for rapid measurements in mines |
IEC 60079-13:2017
|
Explosive atmospheres - Part 13: Equipment protection by pressurized room "p" and artificially ventilated room "v" |
BS EN 62504:2014
|
General lighting. Light emitting diode (LED) products and related equipment. Terms and definitions |
BS EN 61526:2013
|
Radiation protection instrumentation. Measurement of personal dose equivalents Hp(10) and Hp(0,07) for X, gamma, neutron and beta radiations. Direct reading personal dose equivalent meters |
I.S. EN 60325:2004
|
RADIATION PROTECTION INSTRUMENTATION - ALPHA, BETA AND ALPHA/BETA (BETA ENERGY > 60 KEV) CONTAMINATION METERS AND MONITORS |
IEC 61171:1992
|
Radiation protection instrumentation - Monitoring equipment - Atmospheric radioactive iodines in the environment |
IEC 61643-11:2011
|
Low-voltage surge protective devices - Part 11: Surge protective devices connected to low-voltage power systems - Requirements and test methods |
IEEE C37.100.1-2007
|
IEEE Standard of Common Requirements for High Voltage Power Switchgear Rated Above 1000 V |
IEC 61235:1993
|
Live working - Insulating hollow tubes for electrical purposes |
IEC TS 63014-1:2018
|
High voltage direct current (HVDC) power transmission - System requirements for DC-side equipment - Part 1: Using line-commutated converters |
IEC 62873-2:2016
|
Residual current operated circuit-breakers for household and similar use - Part 2: Residual current devices (RCDs) - Vocabulary |
BS EN 61243-3:2014
|
Live working. Voltage detectors Two-pole low-voltage type |
CAN/CSA-C22.2 NO. 60079-30-1:17
|
Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements (Adopted IEC/IEEE 60079-30-1:2015, first edition, 2015-09, with Canadian deviations) |
BIS IS/IEC 62271-100 : 2008
|
HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 100: ALTERNATING-CURRENT CIRCUIT-BREAKERS |
IEC 61243-1:2003+AMD1:2009 CSV
|
Live working - Voltage detectors - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c. |
CSA C22.2 No. 61010.1 : 2012 : FR
|
SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
UNE-EN 62520:2012
|
Railway applications - Electric traction - Short-primary type linear induction motors (LIM) fed by power converters |
I.S. EN 50508:2009
|
MULTI-PURPOSE INSULATING STICKS FOR ELECTRICAL OPERATIONS ON HIGH VOLTAGE INSTALLATIONS |
BS EN 62271-200:2012
|
High-voltage switchgear and controlgear AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV |
CEI EN 60079-30-1 : 2008
|
EXPLOSIVE ATMOSPHERES - PART 30-1: ELECTRICAL RESISTANCE TRACE HEATING - GENERAL AND TESTING REQUIREMENTS |
I.S. EN 60855:1999
|
INSULATING FOAM-FILLED TUBES AND SOLID RODS FOR LIVE WORKING |
I.S. EN 61000-4-27:2000
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-27: TESTING AND MEASUREMENT TECHNIQUES - UNBALANCE, IMMUNITY TEST FOR EQUIPMENT WITH INPUT CURRENT NOT EXCEEDING 16 A PER PHASE |
I.S. EN 62310-1:2005
|
STATIC TRANSFER SYSTEMS (STS) - PART 1: GENERAL AND SAFETY REQUIREMENTS |
GOST R IEC 62086-1 : 2005
|
ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - ELECTRICAL RESISTANCE TRACE HEATERS - PART 1: GENERAL TECHNICAL REQUIREMENTS AND TEST METHODS |
I.S. EN 61058-1:2002
|
SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
VDE 0626 : 1999
|
ELECTRICAL ACCESSORIES - CORD SETS AND INTERCONNECTION CORD SETS |
CEI EN 62022 : 2008
|
INSTALLED MONITORS FOR THE CONTROL AND DETECTION OF GAMMA RADIATIONS CONTAINED IN RECYCLABLE OR NON RECYCLABLE MATERIALS TRANSPORTED BY VEHICLES |
I.S. EN IEC 61281-1:2018
|
FIBRE OPTIC COMMUNICATION SUBSYSTEMS - PART 1: GENERIC SPECIFICATION |
I.S. EN 50539-11:2013
|
LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 11: REQUIREMENTS AND TESTS FOR SPDS IN PHOTOVOLTAIC APPLICATIONS |
BS EN 60268-5 : 2003
|
SOUND SYSTEM EQUIPMENT - PART 5: LOUDSPEAKERS |
BS EN 61010-031:2015
|
Safety requirements for electrical equipment for measurement, control and laboratory use Safety requirements for hand-held probe assemblies for electrical measurement and test |
I.S. EN 61131-2:2007
|
PROGRAMMABLE CONTROLLERS - PART 2: EQUIPMENT REQUIREMENTS AND TESTS |
UNE-EN 61236:2012
|
Live working - Saddles, stick clamps and their accessories |
I.S. EN 60695-10-3:2016
|
FIRE HAZARD TESTING - PART 10-3: ABNORMAL HEAT - MOULD STRESS RELIEF DISTORTION TEST |
IEC 62505-2:2016
|
Railway applications - Fixed installations - Particular requirements for AC switchgear - Part 2: Disconnectors, earthing switches and switches with nominal voltage above 1 kV |
CEI EN 60349-1 : 2012
|
ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 1: MACHINES OTHER THAN ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS |
CEI EN 60799 : 1999
|
ELECTRICAL ACCESSORIES CORD SETS AND INTERCONNECTION CORD SETS |
I.S. EN 62683:2015
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PRODUCT DATA AND PROPERTIES FOR INFORMATION EXCHANGE |
CSA C22.2 No. 61010.1 : 2012 : INC : UPD 1 : 2015
|
SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
I.S. EN 61000-4-21:2011
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-21: TESTING AND MEASUREMENT TECHNIQUES - REVERBERATION CHAMBER TEST METHODS |
I.S. EN 60268-5:2003
|
SOUND SYSTEM EQUIPMENT - PART 5: LOUDSPEAKERS |
UNE-EN 61000-4-21:2012
|
Electromagnetic compatibility (EMC) -- Part 4-21: Testing and measurement techniques - Reverberation chamber test methods |
I.S. EN 60974-8:2009
|
ARC WELDING EQUIPMENT - PART 8: GAS CONSOLES FOR WELDING AND PLASMA CUTTING SYSTEMS |
CSA C22.2 No. 61058.1 : 2009 : INC : UPD 1 : 2013
|
SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
BS EN 50174-1 : 2009
|
INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 1: INSTALLATION SPECIFICATION AND QUALITY ASSURANCE |
BS EN 60974-12:2011
|
Arc welding equipment Coupling devices for welding cables |
CLC/TR 50488:2006
|
Railway applications - Safety measures for the personnel working on or near overhead contact lines |
NF EN 50365 : 2002
|
ELECTRICALLY INSULATING HELMETS FOR USE ON LOW VOLTAGE INSTALLATIONS |
BIS IS 14786 : 2000(R2015)
|
HIGH-VOLTAGE/LOW-VOLTAGE PREFABRICATED SUBSTATIONS |
EN 61936-1 : 2010 AMD 1 2014
|
POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES (IEC 61936-1:2010/A1:2014) |
EN 61318:2008
|
Live working - Conformity assessment applicable to tools, devices and equipment |
NFC 01 482 : 2004 AMD 1 2016
|
ELECTROTECHNICAL VOCABULARY - PART 482: PRIMARY AND SECONDARY CELLS AND BATTERIES |
I.S. EN 60146-1-1:2010
|
SEMICONDUCTOR CONVERTERS - GENERAL REQUIREMENTS AND LINE COMMUTATED CONVERTERS - PART 1-1: SPECIFICATION OF BASIC REQUIREMENTS |
ISO/TS 16952-1:2006
|
Technical product documentation Reference designation system Part 1: General application rules |
IEC 61525:1996
|
Radiation protection instrumentation - X, gamma, high energy betaand neutron radiations - Direct reading personal dose equivalentand/or dose equivalent rate monitors |
IEC 62271-111:2012
|
High-voltage switchgear and controlgear - Part 111: Automatic circuit reclosers and fault interrupters for alternating current systems up to 38 kV |
IEC 61584:2001
|
Radiation protection instrumentation - Installed, portable or transportable assemblies - Measurement of air kerma direction and air kerma rate |
IEC 62590:2010
|
Railway applications - Fixed installations - Electronic power converters for substations |
IEC 61936-1:2010+AMD1:2014 CSV
|
Power installations exceeding 1 kV a.c. - Part 1: Common rules |
IEC 60056:1987
|
High-voltage alternating-current circuit-breakers |
IEC 60051-1:2016
|
Direct acting indicating analogue electrical measuring instruments and their accessories - Part 1: Definitions and general requirements common to all parts |
I.S. EN 62193:2003
|
LIVE WORKING - TELESCOPIC STICKS AND TELESCOPIC MEASURING STICKS |
IEC 60050-394:2007
|
International Electrotechnical Vocabulary (IEV) - Part 394: Nuclear instrumentation - Instruments, systems, equipment and detectors |
I.S. EN 1330-1:2014&LC:2015
|
NON DESTRUCTIVE TESTING - TERMINOLOGY - PART 1: LIST OF GENERAL TERMS |
I.S. EN 60077-1:2017
|
RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 1: GENERAL SERVICE CONDITIONS AND GENERAL RULES |
I.S. EN 62040-3:2011
|
UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 3: METHOD OF SPECIFYING THE PERFORMANCE AND TEST REQUIREMENTS |
I.S. EN 61800-5-1:2007
|
ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-1: SAFETY REQUIREMENTS - ELECTRICAL, THERMAL AND ENERGY |
IEC 60077-1 REDLINE : 2ED 2017
|
RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 1: GENERAL SERVICE CONDITIONS AND GENERAL RULES |
I.S. EN 62022:2007
|
INSTALLED MONITORS FOR THE CONTROL AND DETECTION OF GAMMA RADIATIONS CONTAINED IN RECYCLABLE OR NON-RECYCLABLE MATERIALS TRANSPORTED BY VEHICLES |
EN 61010-1:2010
|
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements |
AAMI ES60601-1 : 2005
|
MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD) |
IEC 61757:2018
|
Fibre optic sensors - Generic specification |
IEC 62683-1:2017
|
Low-voltage switchgear and controlgear - Product data and properties for information exchange - Part 1: Catalogue data |
IEC 61098:2003
|
Radiation protection instrumentation - Installed personnel surface contamination monitoring assemblies |
IEC 60364-7-712:2017
|
Low voltage electrical installations - Part 7-712: Requirements for special installations or locations - Solar photovoltaic (PV) power supply systems |
CSA C22.2 No. 60320-1 : 2011 : R2016
|
APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 1: GENERAL REQUIREMENTS |
IEC 62031:2008+AMD1:2012+AMD2:2014 CSV
|
LED modules for general lighting - Safety specifications |
IEC 60349-2:2010
|
Electric traction - Rotating electrical machines for rail and road vehicles - Part 2: Electronic converter-fed alternating current motors |
BS EN 10332:2003
|
Magnetic materials. Permanent magnet (magnetically hard) materials. Methods of measurement of magnetic properties |
IEC 61987-10:2009
|
Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 10: List of Properties (LOPs) for Industrial-Process Measurement and Control for Electronic Data Exchange - Fundamentals |
IEC 61318:2007
|
Live working - Conformity assessment applicable to tools, devices and equipment |
BS EN 61800-1:1998
|
Adjustable speed electrical power drive systems Rating specifications for low voltage adjustable speed d.c. power drive systems |
UNE-EN 62271-200:2012
|
High-voltage switchgear and controlgear - Part 200: AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV |
BS EN 61131-2:2007
|
Programmable controllers Equipment requirements and tests |
CEI 18-63 : 2013
|
MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 2: SYSTEM DESIGN |
EN 61800-1:1998
|
Adjustable speed electrical power drive systems - Part 1: General requirements - Rating specifications for low voltage adjustable speed d.c. power drive systems |
I.S. EN 62282-2:2012
|
FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES (IEC 62282-2:2012 (EQV)) |
EN 60947-1:2007/A2:2014
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES (IEC 60947-1:2007/A2:2014) |
CEI EN 62282-2 : 2013
|
FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES |
IEC 60404-1:2016 RLV
|
Magnetic materials - Part 1: Classification |
DIN EN 61800-1 : 1999-08
|
ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 1: GENERAL REQUIREMENTS; RATING SPECIFICATIONS FOR LOW VOLTAGE ADJUSTABLE SPEED D.C. POWER DRIVE SYSTEMS |
VDE 0160-101 : 1999-08
|
ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - GENERAL REQUIREMENTS - RATING SPECIFICATIONS FOR LOW VOLTAGE ADJUSTABLE SPEED D.C. POWER DRIVE SYSTEMS |
IEC 61058-1:2016 RLV
|
Switches for appliances - Part 1: General requirements |
ISA 61010-031 : 2007
|
SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 031: SAFETY REQUIREMENTS FOR HAND-HELD PROBE ASSEMBLIES FOR ELECTRICAL MEASUREMENT AND TEST |
EN 61800-5-1:2007/A1:2017
|
ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-1: SAFETY REQUIREMENTS - ELECTRICAL, THERMAL AND ENERGY (IEC 61800-5-1:2007/A1:2016) |
CEI EN 61800-1 : 2000
|
ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 1: GENERAL REQUIREMENTS - RATING SPECIFICATIONS FOR LOW VOLTAGE ADJUSTABLE SPEED D.C. POWER DRIVE SYSTEMS |
CEI EN 50522 : 2011
|
EARTHING OF POWER INSTALLATIONS EXCEEDING 1 KV A.C. |
BIS IS/IEC 61058-1 : 2000(R2007)
|
SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
BS 5227:1992
|
Specification for a.c. metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV |
BS 2692-1(1986) : 1986 AMD 8047
|
FUSES FOR VOLTAGES EXCEEDING 1000 V a.c. - SPECIFICATION FOR CURRENT LIMITING FUSES |
BS 6404-5:1995
|
Magnetic materials Permanent magnet (magnetically hard) materials. Methods of measurement of magnetic properties |
BS 5311:1996
|
High-voltage alternating-current circuit-breakers |
NEMA IEC 60974-1 : 2008
|
ARC WELDING EQUIPMENT - PART 1: WELDING POWER SOURCES |
VDE 0800-1 : 1989
|
TELECOMMUNICATIONS; GENERAL CONCEPTS; REQUIREMENTS AND TESTS FOR THE SAFETY OF FACILITIES AND APPARATUS |
NEMA IEC 60974-8 : 2008
|
ARC WELDING EQUIPMENT - PART 8: GAS CONSOLES FOR WELDING AND PLASMA CUTTING SYSTEMS |
VDE 0804 : 1989 AMD 1 1992
|
TELECOMMUNICATIONS; ADDITIONAL REQUIREMENTS FOR CONSTRUCTION AND TESTING OF APPARATUS |
BIS IS 13252 : 2003
|
INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - GENERAL REQUIREMENTS |
DIN EN 60799 : 1999
|
ELECTRICAL ACCESSORIES - CORD SETS AND INTERCONNECTION CORD SETS |
UNE-IEC 60092-202:2010
|
Electrical installations in ships - Partie 202: System design - Protection |
CEI EN 61666 : 2011
|
INDUSTRIELLE SYSTEME, ANLAGEN UND AUSRUESTUNGEN UND INDUSTRIEPRODUKTE - IDENTIFIKATION VON ANSCHLUESSEN IN SYSTEMEN |
CEI EN 62040-3 : 2015
|
UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 3: METHOD OF SPECIFYING THE PERFORMANCE AND TEST REQUIREMENTS |
CEI EN 60903 : 2005
|
LIVE WORKING - GLOVES OF INSULATING MATERIAL IMPIANTI |
07/30173659 DC : 0
|
BS EN 62271-200 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 200: AC METAL-ENCLOSED SWITCHGEAR AND CONTROLGEAR FOR RATED VOLTAGES ABOVE 1 KV AND UP TO AND INCLUDING 52 KV |
BS 7426(1991) : AMD 8059
|
SPECIFICATION FOR HIGH VOLTAGE ALTERNATING CURRENT SWITCH FUSE COMBINATIONS |
CEI EN 60895 : 2005
|
LIVE WORKING - CONDUCTIVE CLOTHING FOR USE AT NOMINAL VOLTAGE UP TO 800 KV AC AND (+/-) 600 KV DC |
I.S. EN 62491:2008
|
INDUSTRIAL SYSTEMS, INSTALLATIONS AND EQUIPMENT AND INDUSTRIAL PRODUCTS - LABELLING OF CABLES AND CORES |
02/211967 DC : DRAFT DEC 2002
|
IEC 61204-7 ED.1 - LOW VOLTAGE POWER SUPPLIES, D.C. OUTPUT - PART 7: SAFETY REQUIREMENTS |
11/30246431 DC : 0
|
BS EN 62548 - DESIGN REQUIREMENTS FOR PHOTOVOLTAIC (PV) ARRAYS |
PD IEC/TR 60601-4-1:2017
|
Medical electrical equipment Guidance and interpretation. Medical electrical equipment and medical electrical systems employing a degree of autonomy |
04/30125830 DC : DRAFT NOV 2004
|
IEC 61326-2-2 ED 1 - ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 2-2: PARTICULAR REQUIREMENTS - TEST CONFIGURATIONS, OPERATIONAL CONDITIONS AND PERFORMANCE CRITERIA FOR PORTABLE TEST, MEASURING AND MONITORING EQUIPMENT USED IN LOW-VOLTAGE DISTRIBUTION SYSTEMS |
BS EN 50365:2002
|
Electrically insulating helmets for use on low voltage installations |
CEI EN 60896-22 : 2005
|
STATIONARY LEAD-ACID BATTERIES - PART 22: VALVE REGULATED TYPES - REQUIREMENTS |
04/30095682 DC : DRAFT APR 2004
|
IEC 60974-1 ED.3 - ARC WELDING EQUIPMENT - PART 1: WELDING POWER SOURCES |
09/30182105 DC : 0
|
BS EN 60349-2 - ELECTRICAL TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 2: ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS |
CEI EN 60896-21 : 2005
|
STATIONARY LEAD-ACID BATTERIES - PART 21: VALVE REGULATED TYPES - METHODS OF TEST |
ISO 7176-14:2008
|
Wheelchairs Part 14: Power and control systems for electrically powered wheelchairs and scooters Requirements and test methods |
BS EN 62488-1:2013
|
Power line communication systems for power utility applications Planning of analogue and digital power line carrier systems operating over EHV/HV/MV electricity grids |
I.S. EN 60974-1:2012
|
ARC WELDING EQUIPMENT - PART 1: WELDING POWER SOURCES (IEC 60974-1:2012 (EQV)) |
BS EN 60349-2:2010
|
Electrical traction. Rotating electrical machines for rail and road vehicles Electronic converter-fed alternating current motors |
96/708815 DC : DRAFT JUN 1996
|
IVM 2:1993 - INTERNATIONAL VOCABULARY OF BASIC AND GENERAL TERMS IN METROLOGY |
DIN SPEC 1330 : 2013
|
INDUSTRIAL SYSTEMS, INSTALLATIONS AND EQUIPMENT AND INDUSTRIAL PRODUCTS - STRUCTURING PRINCIPLES AND REFERENCE DESIGNATIONS - PART 3: APPLICATION RULES FOR A REFERENCE DESIGNATION SYSTEM (ISO/TS 81346-3:2012) |
BS EN 62520:2011
|
Railway applications. Electric traction. Short-primary type linear induction motors (LIM) fed by power converters |
NF EN 60834-1 : 2000
|
TELEPROTECTION EQUIPMENT OF POWER SYSTEMS - PERFORMANCE AND TESTING - PART 1: COMMAND SYSTEMS |
CEI 109-5 : 2011
|
INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 2-1: APPLICATION GUIDE - EXPLANATION OF THE APPLICATION OF THE IEC 60664 SERIES, DIMENSIONING EXAMPLES AND DIELECTRIC TESTING |
BS IEC 62086-1 : 2001 AMD 16069
|
ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - ELECTRICAL RESISTANCE TRACE HEATING - PART 1: GENERAL AND TESTING REQUIREMENTS |
I.S. EN 60349-1:2010
|
ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 1: MACHINES OTHER THAN ELECTRONIC CONVERTOR-FED ALTERNATING CURRENT MOTORS |
BS IEC 61363-1:1998
|
Electrical installations of ships and mobile and fixed offshore units Procedures for calculating short-circuit currents in three-phase a.c. |
UNE-EN 60079-13:2011
|
Explosive atmospheres - Part 13: Equipment protection by pressurized room "p" |
NF EN 60846-1 : 2015
|
RADIATION PROTECTION INSTRUMENTATION - AMBIENT AND/OR DIRECTIONAL DOSE EQUIVALENT (RATE) METERS AND/OR MONITORS FOR BETA, X AND GAMMA RADIATION - PART 1: PORTABLE WORKPLACE AND ENVIRONMENTAL METERS AND MONITORS |
BS IEC 61584:2001
|
Radiation protection instrumentation. Installed, portable or transportable assemblies. Measurement of air kerma direction and air kerma rate |
10/30173701 DC : 0
|
BS EN 62282-3-200 - FUEL CELL TECHNOLOGIES - PART 3-200: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS |
I.S. EN 61709:2017
|
ELECTRIC COMPONENTS - RELIABILITY - REFERENCE CONDITIONS FOR FAILURE RATES AND STRESS MODELS FOR CONVERSION |
18/30368747 DC : DRAFT APR 2018
|
BS EN 61318 - LIVE WORKING - CONFORMITY ASSESSMENT APPLICABLE TO TOOLS, DEVICES AND EQUIPMENT |
15/30314795 DC : 0
|
BS EN 50152-3-3 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - PARTICULAR REQUIREMENTS FOR A.C. SWITCHGEAR - PART 3-3: MEASUREMENT, CONTROL AND PROTECTION DEVICES FOR SPECIFIC USE IN A.C. TRACTION SYSTEMS - SINGLE-PHASE INDUCTIVE VOLTAGE TRANSFORMERS |
DIN IEC 60359:1993-09
|
EXPRESSION OF THE PERFORMANCE OF ELECTRICAL AND ELECTRONIC MEASURING EQUIPMENT |
08/30191891 DC : DRAFT OCT 2008
|
BS EN 61936-1 - POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES |
PREN 50152-3-3 : DRAFT 2015
|
RAILWAY APPLICATIONS - FIXED INSTALLATIONS - PARTICULAR REQUIREMENTS FOR A.C. SWITCHGEAR - PART 3-3: MEASUREMENT, CONTROL AND PROTECTION DEVICES FOR SPECIFIC USE IN A.C. TRACTION SYSTEMS - SINGLE-PHASE INDUCTIVE VOLTAGE TRANSFORMERS |
I.S. EN 62086-1:2005
|
ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - ELECTRICAL RESISTANCE TRACE HEATING - PART 1: GENERAL AND TESTING REQUIREMENTS |
NF EN 60895 : 2004
|
LIVE WORKING - CONDUCTIVE CLOTHING FOR USE AT NOMINAL VOLTAGE UP TO 800 KV A.C. AND +/- 600 KV D.C. |
BS IEC 61526:1998
|
Radiation protection instrumentation. Measurement of personal dose equivalents Hp(10) and Hp(0,07) for X, gamma and beta radiations. Direct reading personal dose equivalent and/or dose equivalent rate dosemeters |
15/30314792 DC : 0
|
BS EN 50152-3-2 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - PARTICULAR REQUIREMENTS FOR A.C. SWITCHGEAR - PART 3-2: MEASUREMENT, CONTROL AND PROTECTION DEVICES FOR SPECIFIC USE IN A.C. TRACTION SYSTEMS - SINGLE-PHASE CURRENT TRANSFORMERS |
PD 6461-1:1985
|
Vocabulary of metrology Basic and general terms (international) |
16/30338981 DC : 0
|
BS EN 60934 - CIRCUIT-BREAKERS FOR EQUIPMENT (CBE) |
I.S. EN 61243-2:1999
|
LIVE WORKING - VOLTAGE DETECTORS - PART 2: RESISTIVE TYPE TO BE USED FOR VOLTAGES OF 1 KV TO 36 KV A.C. |
I.S. EN 62271-204:2011
|
HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 204: RIGID GAS-INSULATED TRANSMISSION LINES FOR RATED VOLTAGE ABOVE 52 KV (IEC 62271-204:2011 (EQV)) |
BS EN 60974-4:2016
|
Arc welding equipment Periodic inspection and testing |
08/30176298 DC : DRAFT JAN 2008
|
BS EN 62477-1 - SAFETY REQUIREMENTS FOR POWER SEMICONDUCTOR CONVERTER SYSTEMS - PART 1: GENERAL |
UNE-EN 60695-10-3:2017
|
Fire hazard testing - Part 10-3: Abnormal heat - Mould stress relief distortion test |
BS EN 60984:1993
|
Specification for sleeves of insulating material for live working |
BS EN 60404-8-1:2015
|
Magnetic materials Specifications for individual materials. Magnetically hard materials |
CEI EN 60974-13 : 2012
|
ARC WELDING EQUIPMENT - PART 13: WELDING CLAMP |
CEI EN 60832-2 : 2011
|
LIVE WORKING - INSULATING STICKS AND ATTACHABLE DEVICES - PART 2: ATTACHABLE DEVICES |
08/30181631 DC : DRAFT APR 2008
|
BS IEC 60092-509 - ELECTRICAL INSTALLATIONS IN SHIPS - PART 509: OPERATION OF ELECTRICAL INSTALLATIONS |
BS EN 60832:1997
|
Specification for insulating poles (insulating sticks) and universal tool attachments (fittings) for live working |
03/307803 DC : DRAFT MAY 2003
|
EN 61009-1 - RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITH INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCB'S) - PART 1: GENERAL RULES |
NF EN 60664-1 : 2007
|
INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS |
UNE-EN 55016-2-2:2012
|
Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-2: Methods of measurement of disturbances and immunity - Measurement of disturbance power |
BS EN 62491:2008
|
Industrial systems, installations and equipment and industrial products. Labelling of cables and cores |
DD IEC/TS 61850-2:2003
|
Communication networks and systems in substations Glossary |
BS IEC 62873-2:2016
|
Residual current operated circuit-breakers for household and similar use Residual current devices (RCDs). Vocabulary |
BS EN 55016-2-3:2017
|
Specification for radio disturbance and immunity measuring apparatus and methods Methods of measurement of disturbances and immunity. Radiated disturbance measurements |
BS ISO 14617-3:2002
|
Graphical symbols for diagrams Connections and related devices |
BS EN 60325:2004
|
Radiation protection instrumentation. Alpha, beta and alpha/beta (beta energy > 60 keV) contamination meters and monitors |
BS EN 62086-1:2005
|
Electrical apparatus for explosive gas atmospheres. Electrical resistance trace heating General and testing requirements |
IEC TR 62540:2009
|
Radio frequency identification (RFID) for stationary lead acid cells and monoblocs - Tentative requirements |
08/30191664 DC : DRAFT OCT 2008
|
BS EN 50522 - EARTHING OF POWER INSTALLATIONS EXCEEDING 1 KV A.C. |
DD IEC/TS 61994-4-2:2011
|
Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection. Glossary Piezoelectric and dielectric materials. Piezoelectric ceramics |
10/30234803 DC : 0
|
BS EN 61169-1 ED.2 - RADIO FREQUENCY CONNECTORS - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND MEASURING METHODS |
17/30352646 DC : 0
|
BS IEC 63034 ED 1.0 - MICROSPEAKERS (TC 100) |
CLC/TS 61111:2006
|
Matting of insulating material for electrical purposes |
IEC 60781:1989
|
Application guide for calculation of short-circuit currents in low-voltage radial systems |
99/200375 DC : DRAFT MAR 1999
|
IEC 60420 - HIGH-VOLTAGE ALTERNATING CURRENT SWITCH-FUSE COMBINATIONS |
BS 7743(1994) : AMD 8958
|
SADDLES, POLE CLAMPS (STICK CLAMPS) AND ACCESSORIES FOR LIVE WORKING |
DD IEC/TS 61000-5-8:2009
|
Electromagnetic compatibility (EMC) Installation and mitigation guidelines. HEMP protection methods for the distributed infrastructure |
BIS IS/IEC 62271-200 : 2003
|
HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 200: A.C. METAL-ENCLOSED SWITCHGEAR AND CONTROLGEAR FOR RATED VOLTAGES ABOVE 1 KV AND UPTO AND INCLUDING 52 KV |
BS EN 60974-1:2012
|
Arc welding equipment Welding power sources |
BS EN 50152-3-3:2016
|
Railway applications. Fixed installations. Particular requirements for a.c. switchgear Measurement, control and protection devices for specific use in a.c. traction systems. Voltage transformers |
BS EN 61243-5:2001
|
Live working. Voltage detectors Voltage detecting systems (VDS) |
BS EN 60947-5-4:2003
|
Specification for low-voltage switchgear and controlgear. Control circuit devices and switching elements Method of assessing the performance of low-energy contacts. Special tests |
BS EN 60695-10-3:2016
|
Fire hazard testing Abnormal heat. Mould stress relief distortion test |
EN 62040-3:2011
|
Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements |
BIS IS 12640-2 : 2008
|
RESIDUAL CURRENT OPERATED CIRCUIT-BREAKING FOR HOUSEHOLD AND SIMILAR USES - PART 2: CIRCUIT-BREAKERS WITH INTEGRAL OVERCURRENT PROTECTION (RCBOS) |
08/30195564 DC : 0
|
BS EN 60974-1 - ARC WELDING EQUIPMENT - PART 1: WELDING POWER SOURCES |
EN 61534-1:2011/A1:2014
|
POWERTRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS (IEC 61534-1:2011/A1:2014) |
I.S. EN 60349-4:2013
|
ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 4: PERMANENT MAGNET SYNCHRONOUS ELECTRICAL MACHINES CONNECTED TO AN ELECTRONIC CONVERTER (IEC 60349-4:2012 (EQV)) |
IEC 61204-3 REDLINE : 3ED 2016
|
LOW-VOLTAGE SWITCH MODE POWER SUPPLIES - PART 3: ELECTROMAGNETIC COMPATIBILITY (EMC) |
IEC 61709:2017 RLV
|
Electric components - Reliability - Reference conditions for failure rates and stress models for conversion |
CISPR 16-2-3:2016
|
Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements |
BS EN 62271-100 : 2009
|
HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 100: ALTERNATING-CURRENT CIRCUIT-BREAKERS (IEC 62271-100:2008) |
IEC 60669-1:2017 RLV
|
Switches for household and similar fixed-electrical installations - Part 1: General requirements |
I.S. EN 50174-1:2009
|
INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 1: INSTALLATION SPECIFICATION AND QUALITY ASSURANCE |
CEI EN 60349-2 : 2012
|
ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 2: ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS |
IEC PAS 60050-732:2007
|
International Electrotechnical Vocabulary (IEV) - Part 732: Computer network technology |
DIN EN 61660-1 : 1998 COR 1 2010
|
SHORT-CIRCUIT CURRENTS - SHORT-CIRCUIT CURRENTS IN D.C. AUXILIARY INSTALLATIONS IN POWER PLANTS AND SUBSTATIONS - PART 1: CALCULATION OF SHORT-CIRCUIT CURRENTS |
CSA C22.3 No. 61936-1 : 2008 : R2015
|
POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES |
IEC 60364-7-712 REDLINE : 2ED 2017
|
LOW VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-712: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - SOLAR PHOTOVOLTAIC (PV) POWER SUPPLY SYSTEMS |
BS 173-1:1992
|
Electric traction (rail and road vehicles) Specification for rotating electrical machines |
ISO 14617-1:2005
|
Graphical symbols for diagrams Part 1: General information and indexes |
I.S. EN 50321-1:2018
|
LIVE WORKING - FOOTWEAR FOR ELECTRICAL PROTECTION - INSULATING FOOTWEAR AND OVERBOOTS |
I.S. CLC/TS 61111:2006
|
MATTING OF INSULATING MATERIAL FOR ELECTRICAL PURPOSES |
CEI EN 61643-11 : 2014
|
LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 11: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER SYSTEMS - REQUIREMENTS AND TEST METHODS |
NF EN 50539-11 : 2013 AMD 1 2017
|
LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 11: REQUIREMENTS AND TESTS FOR SPDS IN PHOTOVOLTAIC APPLICATIONS |
BS 7520:1995
|
Guide to quality assurance plans for tools for live working |
I.S. EN 61660-1:1999
|
SHORT-CIRCUIT CURRENTS IN D.C. AUXILIARY INSTALLATIONS IN POWER PLANTS AND SUBSTATIONS - CALCULATION OF SHORT-CIRCUIT CURRENTS |
I.S. EN 61326:1998
|
|
BS EN 62040-3:2011
|
Uninterruptible power systems (UPS) Method of specifying the performance and test requirements |
I.S. EN 61643-11:2012
|
LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 11: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER SYSTEMS - REQUIREMENTS AND TESTS METHODS |
I.S. EN 60846-1:2014
|
RADIATION PROTECTION INSTRUMENTATION - AMBIENT AND/OR DIRECTIONAL DOSE EQUIVALENT (RATE) METERS AND/OR MONITORS FOR BETA, X AND GAMMA RADIATION - PART 1: PORTABLE WORKPLACE AND ENVIRONMENTAL METERS AND MONITORS |
EN 62924:2017
|
Railway applications - Fixed installations - Stationary energy storage system for DC traction systems |
I.S. EN 60896-11:2003
|
STATIONARY LEAD-ACID BATTERIES - PART 11: VENTED TYPES - GENERAL REQUIREMENTS AND METHODS OF TESTS |
I.S. EN 60068-2-65:2013
|
ENVIRONMENTAL TESTING - PART 2-65: TESTS - TEST FG: VIBRATION - ACOUSTICALLY INDUCED METHOD (IEC 60068-2-65:2013 (EQV)) |
BS EN 62271-1:2017
|
High-voltage switchgear and controlgear Common specifications for alternating current switchgear and controlgear |
PREN 50152-1 : DRAFT 2011
|
RAILWAY APPLICATIONS - FIXED INSTALLATIONS - PARTICULAR REQUIREMENTS FOR ALTERNATING CURRENT SWITCHGEAR - PART 1: CIRCUIT-BREAKERS WITH NOMINAL VOLTAGE ABOVE 1 KV |
BS EN 60934 : 2001
|
CIRCUIT-BREAKERS FOR EQUIPMENT (CBE) |
CSA C22.3 No. 61936-1 : 2008
|
POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES |
I.S. EN 61439-1:2011
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES (IEC 61439-1:2011) |
I.S. EN 50286:1999
|
ELECTRICAL INSULATING PROTECTIVE CLOTHING FOR LOW-VOLTAGE INSTALLATIONS |
IEC TR 60601-4-1:2017
|
Medical electrical equipment - Part 4-1: Guidance and interpretation - Medical electrical equipment and medical electrical systems employing a degree of autonomy |
BIS IS/IEC 60079-30-1 : 2007
|
EXPLOSIVE ATMOSPHERES - PART 30: ELECTRICAL RESISTANCE TRACE HEATING - SECTION 1: GENERAL AND TESTING REQUIREMENTS |
I.S. EN 50152-3-2:2016
|
RAILWAY APPLICATIONS - FIXED INSTALLATIONS - PARTICULAR REQUIREMENTS FOR A.C. SWITCHGEAR - PART 3-2: MEASUREMENT, CONTROL AND PROTECTION DEVICES FOR SPECIFIC USE IN A.C. TRACTION SYSTEMS - SINGLE-PHASE CURRENT TRANSFORMERS |
I.S. EN 62271-100:2009
|
HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 100: ALTERNATING-CURRENT CIRCUIT-BREAKERS |
ISO 14617-2:2002
|
Graphical symbols for diagrams Part 2: Symbols having general application |
IEC 60420:1990
|
High-voltage alternating current switch-fuse combinations |
I.S. EN 62504:2014
|
GENERAL LIGHTING - LIGHT EMITTING DIODE (LED) PRODUCTS AND RELATED EQUIPMENT - TERMS AND DEFINITIONS (IEC 62504:2014/A1:2018) |
IEC 62031:2018 RLV
|
LED modules for general lighting - Safety specifications |
I.S. EN 61098:2007
|
RADIATION PROTECTION INSTRUMENTATION - INSTALLED PERSONNEL SURFACE CONTAMINATION MONITORING ASSEMBLIES |
BIS IS/IEC 62271-1 : 2007
|
HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: COMMON SPECIFICATIONS |
EN IEC 61281-1:2018
|
Fibre optic communication subsystems - Part 1: Generic specification |
EN 62504:2014/A1:2018
|
GENERAL LIGHTING - LIGHT EMITTING DIODE (LED) PRODUCTS AND RELATED EQUIPMENT - TERMS AND DEFINITIONS |
CSA C22.2 No. 61058.1 : 2009
|
SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
CEI EN 60404-1 : 1ED 2017
|
MAGNETIC MATERIALS - PART 1: CLASSIFICATION |
VDE 0557-3 : 2001 COR 1 2004
|
LOW-VOLTAGE POWER SUPPLIES, D.C. OUTPUT - PART 3: PRODUCT EMC STANDARD |
IEC 60050-131:2002
|
International Electrotechnical Vocabulary (IEV) - Part 131: Circuit theory |
NF EN 50522 : 2012
|
EARTHING OF POWER INSTALLATIONS EXCEEDING 1 KV A.C. |
EN 50321-1:2018
|
Live working - Footwear for electrical protection - Insulating footwear and overboots |
BS EN 60079-30-1:2017
|
Explosive atmospheres Electrical resistance trace heating. General and testing requirements |
IEC 61323:1995
|
Radiation protection instrumentation - Neutron radiation - Direct reading personal dose equivalent and/or dose equivalent rate monitors |
ISA 12.04.01 : 2003
|
ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 2: PRESSURIZED ENCLOSURES "P" |
I.S. EN 50152-2:2012
|
RAILWAY APPLICATIONS - FIXED INSTALLATIONS - PARTICULAR REQUIREMENTS FOR ALTERNATING CURRENT SWITCHGEAR - PART 2: DISCONNECTORS, EARTHING SWITCHES AND SWITCHES WITH NOMINAL VOLTAGE ABOVE 1 KV |
I.S. EN 61479:2001
|
LIVE WORKING - FLEXIBLE CONDUCTOR COVERS (LINE HOSES) OF INSULATING MATERIAL |
CEI EN 61660-1 : 1999
|
SHORT-CIRCUIT CURRENTS IN D.C. AUXILIARY INSTALLATIONS IN POWER PLANTS AND SUBSTATIONS - PART 1: CALCULATION OF SHORT-CIRCUIT CURRENTS |
I.S. EN 62488-1:2013
|
POWER LINE COMMUNICATION SYSTEMS FOR POWER UTILITY APPLICATIONS - PART 1: PLANNING OF ANALOGUE AND DIGITAL POWER LINE CARRIER SYSTEMS OPERATING OVER EHV/HV/MV ELECTRICITY GRIDS (IEC 62488-1:2012 (EQV)) |
EN 62271-200:2012/AC:2015
|
HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 200: AC METAL-ENCLOSED SWITCHGEAR AND CONTROLGEAR FOR RATED VOLTAGES ABOVE 1 KV AND UP TO AND INCLUDING 52 KV (IEC 62271-200:2011) |
CAN/CSA-C22.2 NO. 61010-1-12 (R2017)
|
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements (Tri-national standard, with UL 61010-1 and ANSI/ISA-61010-1 (82.02.01) |
NF EN 60646 : 2003
|
TEST METHODS FOR CRUCIBLE INDUCTION FURNACES |
IEC 60669-1:2017
|
Switches for household and similar fixed-electrical installations - Part 1: General requirements |
IEC 62031:2008+AMD1:2012+AMD2:2014 CSV
|
LED MODULES FOR GENERAL LIGHTING - SAFETY SPECIFICATIONS |
ISO 7637-1:2015
|
Road vehicles — Electrical disturbances from conduction and coupling — Part 1: Definitions and general considerations |
ISO/IEC 15018:2004
|
Information technology Generic cabling for homes |
EN 61709:2017
|
Electric components - Reliability - Reference conditions for failure rates and stress models for conversion |
I.S. EN 55016-2-2:2011
|
SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 2-2: METHODS OF MEASUREMENT OF DISTURBANCES AND IMMUNITY - MEASUREMENT OF DISTURBANCE POWER |
IEC 61558-1:2017
|
Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests |
IEC 61892-2:2012
|
Mobile and fixed offshore units - Electrical installations - Part 2: System design |
IEC 60909:1988
|
Short-circuit current calculation in three-phase a.c. systems |
IEC 60974-1:2017
|
Arc welding equipment - Part 1: Welding power sources |
CISPR 16-2-3 REDLINE : 4ED 2016
|
SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 2-3: METHODS OF MEASUREMENT OF DISTURBANCES AND IMMUNITY - RADIATED DISTURBANCE MEASUREMENTS |
IEC 62022:2004
|
Installed monitors for the control and detection of gamma radiations contained in recyclable or non-recyclable materials transported by vehicles |
IEC TS 61968-2:2011
|
Application integration at electric utilities - System interfaces for distribution management - Part 2: Glossary |
IEC 61709 : 3.0
|
ELECTRIC COMPONENTS - RELIABILITY - REFERENCE CONDITIONS FOR FAILURE RATES AND STRESS MODELS FOR CONVERSION |
I.S. HD 483.5 S2:1995
|
SOUND SYSTEM EQUIPMENT - PART 5: LOUDSPEAKERS |
IEC 62103:2003
|
Electronic equipment for use in power installations |
IEC TS 62257-7-1:2010
|
Recommendations for small renewable energy and hybrid systems for rural electrification - Part 7-1: Generators - Photovoltaic generators |
I.S. EN 61310-2:2008
|
SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 2: REQUIREMENTS FOR MARKING |
I.S. EN 50321:2003
|
ELECTRICITY INSULATING FOOTWEAR FOR WORKING ON LOW VOLTAGE INSTALLATIONS |
I.S. EN 62041:2010
|
SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF - EMC REQUIREMENTS |
IEC 61892-3:2012
|
Mobile and fixed offshore units - Electrical installations - Part 3: Equipment |
IEC 60282-2:2008
|
High-voltage fuses - Part 2: Expulsion fuses |
IEC 62271-1:2017
|
High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear |
IEC 62282-3-200:2015
|
Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test methods |
IEC 62504:2014
|
General lighting - Light emitting diode (LED) products and related equipment - Terms and definitions |
UNE-EN 60349-2:2011
|
Electric traction - Rotating electrical machines for rail and road vehicles -- Part 2: Electronic converter-fed alternating current motors |
UNE-EN 50152-3-2:2016
|
Railway applications - Fixed installations - Particular requirements for a.c. switchgear - Part 3-2: Measurement, control and protection devices for specific use in a.c. traction systems - Current transformers |
IEC 61219:1993
|
Live working - Earthing or earthing and short-circuiting equipment using lances as a short-circuiting device - Lance earthing |
IEC 81346-1:2009
|
Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations - Part 1: Basic rules |
IEC 60832-2:2010
|
Live working - Insulating sticks and attachable devices - Part 2: Attachables devices |
UNE-EN 60974-12:2011
|
Arc welding equipment - Part 12: Coupling devices for welding cables |
IEC 61800-4:2002
|
Adjustable speed electrical power drive systems - Part 4: General requirements - Rating specifications for a.c. power drive systems above 1 000 V a.c. and not exceeding 35 kV |
IEC 60068-2-65:2013
|
Environmental testing - Part 2-65: Tests - Test Fg: Vibration - Acoustically induced method |
IEC 61582:2004
|
Radiation protection instrumentation - In vivo counters - Classification, general requirements and test procedures for portable, transportable and installed equipment |
IEC 60896-2:1995
|
Stationary lead-acid batteries - General requirements and test methods - Part 2: Valve regulated types |
BS EN 61800-5-1:2007
|
Adjustable speed electrical power drive systems Safety requirements. Electrical, thermal and energy |
UNE-EN 61010-1:2011
|
Safety requirements for electrical equipment for measurement, control and laboratory use -- Part 1: General requirements |
UNE-HD 60364-5-53:2016
|
Low-voltage electrical installations - Part 5-53: Selection and erection of electrical equipment - Switchgear and controlgear |
UNE-EN 62271-100:2011
|
High-voltage switchgear and controlgear -- Part 100: Alternating-current circuit-breakers |
UNE-EN 60601-1:2008
|
Medical electrical equipment -- Part 1: General requirements for basic safety and essential performance |
EN 60664-1:2007
|
Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
ISA 61010-1 : 2008
|
SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
EN 60895:2003
|
Live working - Conductive clothing for use at nominal voltage up to 800 kV a.c. and ± 600 kV d.c. |
UL 60320-1:2ED 2011-05
|
Appliances Couplers for Household and Similar General Purposes - Part 1: General Requirements |
UL 61010-031:2ED 2017-01
|
Standard for Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use - Part 031: Safety Requirements for Hand-Held and Hand-Manipulated Probe Assemblies for Electrical Test and Measurement |
PD 6461-1:1995
|
General metrology Basic and general terms (VIM) |
CEI EN 61243-5 : 2002
|
LIVE WORKING - VOLTAGE DETECTORS - PART 5: VOLTAGE DETECTING SYSTEMS (VDS) |
UNE-EN 60349-4:2013
|
Electric traction - Rotating electrical machines for rail and road vehicles - Part 4: Permanent magnet synchronous electrical machines connected to an electronic converter |
CEI EN 61318 : 2008
|
LIVE WORKING - CONFORMITY ASSESSMENT APPLICABLE TO TOOLS, DEVICES AND EQUIPMENT |
DIN VDE 0660-100 : 1992
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES |
BS 7692(1993) : 1993 AMD 9358
|
INSULATING POLES (INSULATING STICKS) AND UNIVERSAL TOOL ATTACHMENTS (FITTINGS) FOR LIVE WORKING |
09/30190947 DC : 0
|
BS EN 60974-13 - ARC WELDING EQUIPMENT - PART 13: RETURN CURRENT CLAMP |
DIN EN 81346-1:2010-05
|
INDUSTRIAL SYSTEMS, INSTALLATIONS AND EQUIPMENT AND INDUSTRIAL PRODUCTS - STRUCTURING PRINCIPLES AND REFERENCE DESIGNATIONS - PART 1: BASIC RULES |
BS EN 50152-1 : 2012
|
RAILWAY APPLICATIONS - FIXED INSTALLATIONS - PARTICULAR REQUIREMENTS FOR ALTERNATING CURRENT SWITCHGEAR - PART 1: CIRCUIT-BREAKERS WITH NOMINAL VOLTAGE ABOVE 1 KV |
I.S. EN 61582:2006
|
RADIATION PROTECTION INSTRUMENTATION - IN VIVO COUNTERS - CLASSIFICATION, GENERAL REQUIREMENTS AND TEST PROCEDURES FOR PORTABLE, TRANSPORTABLE AND INSTALLED EQUIPMENT |
BIS IS 13771 : 2013
|
LIVE WORKING - CONDUCTIVE CLOTHING FOR USE AT NOMINAL VOLTAGE UP TO 800 KV A.C. AND +/-600 KV D.C. |
IEC 60846-1:2009
|
Radiation protection instrumentation - Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation - Part 1: Portable workplace and environmental meters and monitors |
NF EN 62076 : 2007
|
INDUSTRIAL ELECTROHEATING INSTALLATIONS - TEST METHODS FOR INDUCTION CHANNEL AND INDUCTION CRUCIBLE FURNACES |
BS EN 61660-1:1997
|
Short-circuit currents in d.c auxiliary installations in power plants and substations Calculation of short-circuit currents |
DD ENV 61112:2002
|
Blankets of insulating material for electrical purposes |
I.S. EN 61318:2008
|
LIVE WORKING - CONFORMITY ASSESSMENT APPLICABLE TO TOOLS, DEVICES AND EQUIPMENT |
03/111198 DC : DRAFT JULY 2003
|
IEC 60974-12 ED.2 - ARC WELDING EQUIPMENT - PART 12: COUPLING DEVICES |
BS EN 61098:2007
|
Radiation protection instrumentation. Installed personnel surface contamination monitoring assemblies |
BS EN 60834-1:2000
|
Teleprotection equipment of power systems. Performance and testing Command systems |
12/30253935 DC : DRAFT JUNE 2012
|
BS EN 62271-201 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - AC SOLID-INSULATED ENCLOSED SWITCHGEAR AND CONTROLGEAR FOR RATED VOLTAGES ABOVE 1 KV AND UP TO AND INCLUDING 52 KV |
PREN 1330-1 : DRAFT 2014
|
NON-DESTRUCTIVE TESTING - TERMINOLOGY - PART 1: LIST OF GENERAL TERMS |
CEI EN 60027-4 : 2008
|
LETTER SYMBOLS TO BE USED IN ELECTRICAL TECHNOLOGY - PART 4: ROTATING ELECTRICAL MACHINES |
05/30133436 DC : DRAFT MAY 2005
|
|
BS ISO 14617-1:2002
|
Graphical symbols for diagrams General information and indexes |
BS EN 60079-13:2017
|
Explosive atmospheres Equipment protection by pressurized room \'p\' and artificially ventilated room \'v\' |
00/244828 DC : DRAFT OCT 2000
|
IEC 61983 ED. 1.0 - MEASUREMENT AND EVALUATION OF HIGH FREQUENCY (9 KHZ TO 300 GHZ) ELECTROMAGNETIC FIELDS WITH REGARD TO HUMAN EXPOSURE |
CEI EN 61582 : 2007
|
RADIATION PROTECTION INSTRUMENTATION - IN VIVO COUNTERS - CLASSIFICATION, GENERAL REQUIREMENTS AND TEST PROCEDURES FOR PORTABLE, TRANSPORTABLE AND INSTALLED EQUIPMENT |
IEC 61344:1996
|
Radiation protection instrumentation - Monitoring equipment - Personal warning devices for X and gamma radiations |
I.S. EN 60079-30-1:2017
|
EXPLOSIVE ATMOSPHERES - PART 30-1: ELECTRICAL RESISTANCE TRACE HEATING - GENERAL AND TESTING REQUIREMENTS |
10/30216179 DC : 0
|
BS EN 60974-12 - ARC WELDING EQUIPMENT - PART 12: COUPLING DEVICES FOR WELDING CABLES |
BS EN 60832-1:2010
|
Live working. Insulating sticks and attachable devices Insulating sticks |
BS EN 62551:2012
|
Analysis techniques for dependability. Petri net techniques |
11/30244390 DC : 0
|
BS EN 61010-031 ED.2 - SAFETY REQUIREMENTS FOR HAND-HELD PROBE ASSEMBLIES FOR ELECTRICAL MEASUREMENT AND TEST |
BS IEC 61559-1:2009
|
Radiation protection instrumentation in nuclear facilities. Centralized systems for continuous monitoring of radiation and/or levels of radioactivity General requirements |
14/30267384 DC : 0
|
BS EN 60079-30-1 ED 1.0 - EXPLOSIVE ATMOSPHERES - PART 30-1: ELECTRICAL RESISTANCE TRACE HEATING - GENERAL; TYPE TESTING AND DESIGN REQUIREMENTS |
BIS IS/IEC 60320-1 : 2001
|
APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 1: GENERAL REQUIREMENTS |
13/30288591 DC : 0
|
BS EN 60974-1 - ARC WEDLING EQUIPMENT - PART 1: WELDING POWER SOURCE |
I.S. EN 60079-2:2014
|
EXPLOSIVE ATMOSPHERES - PART 2: EQUIPMENT PROTECTION BY PRESSURIZED ENCLOSURE 'P' |
CEI EN 60325 : 2005
|
RADIATION PROTECTION INSTRUMENTATION - ALPHA, BETA AND ALPHA/BETA (BETA ENERGY > 60 KEV) CONTAMINATION METERS AND MONITORS |
CEI EN 60947-5-4 : 2005
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-4: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - METHOD OF ASSESSING THE PERFORMANCE OF LOW-ENERGY CONTACTS - SPECIAL TESTS |
I.S. EN 61010-1:2010/A1:2019
|
SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
BS EN 60947-1 : 2007
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES |
10/30233903 DC : 0
|
BS EN 60050-114 - INTERNATIONAL ELECTROTECHNICAL VOCABULARY - PART 114: ELECTROCHEMISTRY (PROPOSED HORIZONTAL STANDARD) |
00/201034 DC : DRAFT FEB 2000
|
BS EN 60896-1 ED.2 - STATIONARY LEAD-ACID BATTERIES - GENERAL REQUIREMENTS AND METHODS OF TEST - PART 1: VENTED TYPES |
NF EN 61326 : 97 AMD 3 2004
|
ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE EMC REQUIREMENTS - GENERAL REQUIREMENTS |
UNE-EN 60974-13:2011
|
Arc welding equipment - Part 13: Welding clamp |
05/30139105 DC : DRAFT SEP 2005
|
IEC 61800-5-1 ED 2 - ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-1: SAFETY REQUIREMENTS - ELECTRICAL, THERMAL AND ENERGY |
I.S. EN 62520:2011
|
RAILWAY APPLICATIONS - ELECTRIC TRACTION - SHORT-PRIMARY TYPE LINEAR INDUCTION MOTORS (LIM) FED BY POWER CONVERTERS |
BS EN 50328:2003
|
Railway applications. Fixed installations. Electronic power convertors for substations |
BS IEC 61942:1997
|
Live working. Gloves and mitts with mechanical protection |
08/30183388 DC : DRAFT JUNE 2008
|
BS EN 60974-11 - ARC WELDING EQUIPMENT - PART 11: ELECTRODE HOLDERS |
UNE-IEC 60050-351:2010
|
International Electrotechnical Vocabulary (IEV) - Part 351: Control technology |
CEI CLC/TR 50488 : 2007
|
RAILWAY APPLICATIONS - SAFETY MEASURES FOR PERSONNEL WORKING NEAR OVERHEAD CONTACT LINES |
CEI EN 62041 : 2012
|
SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF - EMC REQUIREMENTS |
BS EN 60646:1999
|
Test methods for crucible induction furnaces |
06/30156472 DC : DRAFT SEP 2006
|
BS EN 60146-1-1 - SEMICONDUCTOR CONVERTERS - GENERAL REQUIREMENTS AND LINE COMMUTATED CONVERTERS - PART 1-1: SPECIFICATION OF BASIC REQUIREMENTS |
BS EN 62310-2:2007
|
Static transfer systems (STS) Electromagnetic compatibility (EMC) requirements |
IEC 60909-0:2016
|
Short-circuit currents in three-phase a.c. systems - Part 0: Calculation of currents |
04/30113789 DC : DRAFT MAY 2004
|
EN 60846 - RADIATION PROTECTION INSTRUMENTATION - AMBIENT AND/OR DIRECTIONAL DOSE EQUIVALENT (RATE) METERS AND/OR MONITORS FOR BETA, X AND GAMMA RADIATION |
BS EN 61534-1 : 2011
|
POWERTRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS |
14/30314461 DC : 0
|
BS EN 60974-4 ED 3.0 - ARC WELDING EQUIPMENT - PART 4: PERIODIC INSPECTION AND TESTING |
CEI EN 61098 : 2008
|
RADIATION PROTECTION INSTRUMENTATION - INSTALLED PERSONNEL SURFACE CONTAMINATION MONITORING ASSEMBLIES |
I.S. EN 60404-14:2002
|
MAGNETIC MATERIALS - PART 14: METHODS OF MEASUREMENT OF THE MAGNETIC DIPOLE MOMENT OF A FERROMAGNETIC MATERIAL SPECIMEN BY THE WITHDRAWAL OR ROTATION METHOD |
BS EN 61481:2001
|
Live working. Portable phase comparators for use on voltages from 1 kV to 36 kV a.c. |
BS EN 61204-3:2001
|
Low voltage power supplies, d.c. output Electromagnetic compatibility (EMC) |
08/30157876 DC : 0
|
|
BS 7740(1994) : 1994 AMD 9060
|
PORTABLE EQUIPMENT FOR EARTHING OR EARTHING AND SHORT-CIRCUITING |
CEI EN 60855 : 1997
|
INSULATING FOAM-FILLED TUBES AND SOLID RODS FOR LIVE WORKING |
03/306957 DC : DRAFT APR 2003
|
BS IEC 62022 - DETECTION OF GAMMA RADIATIONS CONTAINED IN RECYCLABLE OR NON-RECYCLABLE MATERIALS TRANSPORTED BY VEHICLES |
BS EN 62041:2010
|
Safety of transformers, reactors, power supply units and combinations thereof. EMC requirements |
10/30216004 DC : 0
|
BS EN 60050-351 - INTERNATIONAL ELECTROTECHNICAL VOCABULARY - PART 351: CONTROL TECHNOLOGY |
07/30168572 DC : 0
|
BS IEC 61010-1 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
01/205976 DC : DRAFT AUG 2001
|
IEC 60519-10 - SAFETY IN ELECTROHEAT INSTALLATIONS - PART 10: PARTICULAR REQUIREMENTS FOR ELECTRICAL RESISTANCE TRACE HEATING FOR INDUSTRIAL AND COMMERCIAL APPLICATIONS |
01/206938 DC : DRAFT OCT 2001
|
IEC 60255-27 ED.1.0 - MEASURING RELAYS AND EQUIPMENT - PART 27: PRODUCT SAFETY REQUIREMENTS FOR MEASURING RELAYS AND PROTECTION EQUIPMENT |
BS EN 61987-1:2007
|
Industrial-process measurement and control. Data structures and elements in process equipment catalogues Measuring equipment with analogue and digital output |
UNE-EN 60079-30-1:2017
|
Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements |
IEC 61256:1996
|
Radiation protection instrumentation - Installed monitors for the detection of radioactive contamination of laundry |
PD IEC TR 61278:1997
|
Live working. Guidelines for dielectric testing of tools and equipment |
04/30078214 DC : DRAFT AUG 2004
|
IEC 61577-1 - RADIATION PROTECTION INSTRUMENTATION - RADON AND RADON DECAY PRODUCT MEASURING INSTRUMENTS - PART 1: GENERAL PRINCIPLES |
07/30170224 DC : DRAFT AUG 2007
|
BS EN 61230 - LIVE WORKING - PORTABLE EQUIPMENT FOR EARTHING OR EARTHING AND SHORT-CIRCUITING |
11/30235283 DC : 0
|
BS EN 50152-2 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - PARTICULAR REQUIREMENTS FOR ALTERNATING CURRENT SWITCHGEAR - PART 2: DISCONNECTORS, EARTHING SWITCHES AND SWITCHES WITH NOMINAL VOLTAGE ABOVE 1 KV |
PD IEC/TR 62518:2009
|
Rare earth sintered magnets. Stability of the magnetic properties at elevated temperatures |
BS EN 61000-4-21:2011
|
Electromagnetic compatibility (EMC) Testing and measurement techniques. Reverberation chamber test methods |
NF EN 60325 : 2004
|
RADIATION PROTECTION INSTRUMENTATION - ALPHA, BETA AND ALPHA/BETA (BETA ENERGY > 60 KEV) CONTAMINATION METERS AND MONITORS |
NF EN 60984 : 93 AMD 1 2003
|
SLEEVES OF INSULATING MATERIAL FOR LIVE WORKING |
NFC 01 351 : 2007
|
INTERNATIONAL ELECTROTECHNICAL VOCABULARY - PART 351: CONTROL TECHNOLOGY |
CSA E60079.2 : 2002 : R2011
|
ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - ELECTRICAL APPARATUS - TYPE OF PROTECTION "p" |
I.S. EN 60974-11:2010
|
ARC WELDING EQUIPMENT - PART 11: ELECTRODE HOLDERS |
BS EN 61243-2:1998
|
Live working. Voltage detectors Resistive type to be used for voltages of 1 kV to 36 kV a.c. |
BS EN 60079-2:2014
|
Explosive atmospheres Equipment protection by pressurized enclosure \'p\' |
09/30150998 DC : 0
|
|
CSA CISPR 16-2-3 : 2012
|
SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 2-3: METHODS OF MEASUREMENT OF DISTURBANCES AND IMMUNITY - RADIATED DISTURBANCE MEASUREMENTS |
BS EN 60909-0:2016
|
Short-circuit currents in three-phase a.c. systems Calculation of currents |
IEC TS 62735-1:2015
|
Direct current (DC) plugs and socket-outlets for information and communication technology (ICT) equipment installed in data centres and telecom central offices - Part 1: Plug and socket-outlet system for 2,6 kW |
BS EN 61326:1998
|
Electrical equipment for measurement, control and laboratory use. EMC requirements |
06/30147660 DC : DRAFT MAR 2006
|
IEC 60050-581 - INTERNATIONAL ELECTROTECHNICAL VOCABULARY - PART 581: ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT |
UNE-EN 50152-1:2013
|
Railway applications - Fixed installations - Particular requirements for alternating current switchgear - Part 1: Circuit-breakers with nominal voltage above 1 kV |
BS EN 62282-3-2:2006
|
Fuel cell technologies Stationary fuel cell power systems. Performance test methods |
CSA E60974.7 : 2002 : R2016
|
ARC WELDING EQUIPMENT - PART 7: TORCHES |
CSA E60974.7:2002
|
ARC WELDING EQUIPMENT - PART 7: TORCHES |
DIN 40200:1981-10
|
NOMINAL VALUE, LIMITING VALUE, RATED VALUE, RATING - CONCEPTS |
BIS IS/IEC 62271-109 : 2008
|
HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 109: ALTERNATING-CURRENT SERIES CAPACITOR BY-PASS SWITCHES |
CSA E60079.2:2002
|
ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - ELECTRICAL APPARATUS - TYPE OF PROTECTION "p" |
CAN/CSA-C22.2 NO. 60896-11:17
|
Stationary lead-acid batteries — Part 11: Vented types — General requirements and methods of tests (Adopted IEC 60896-11:2002, first edition, 2002-12, with Canadian deviations) | Batteries stationnaires au plomb — Partie 11 : Batteries au plomb du type ouvert — Prescriptions générales et méthodes d’essai (norme IEC 60896-11:2002 adoptée, première édition, 2002-12, avec exigences propres au Canada) |
PREN 50174-1 : DRAFT 2017
|
INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 1: INSTALLATION SPECIFICATION AND QUALITY ASSURANCE |
BS EN 50321-1:2018
|
Live working. Footwear for electrical protection Insulating footwear and overboots |
CSA C22.2 No. 61010.1 : 2012 : INC : UPD 2 :2016
|
SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
BS EN 61058-1 : 2002
|
SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
S.R. HD 60364-5-53:2015
|
LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-53: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR |
I.S. EN 62271-1:2017
|
HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: COMMON SPECIFICATIONS FOR ALTERNATING CURRENT SWITCHGEAR AND CONTROLGEAR |
I.S. EN 50152-1:2012
|
RAILWAY APPLICATIONS - FIXED INSTALLATIONS - PARTICULAR REQUIREMENTS FOR ALTERNATING CURRENT SWITCHGEAR - PART 1: CIRCUIT-BREAKERS WITH NOMINAL VOLTAGE ABOVE 1 KV |
I.S. EN 60027-7:2010
|
LETTER SYMBOLS TO BE USED IN ELECTRICAL TECHNOLOGY - PART 7: POWER GENERATION, TRANSMISSION AND DISTRIBUTION |
UNE-EN 62924:2017
|
Railway applications - Fixed installations - Stationary energy storage system for DC traction systems |
I.S. EN 61287-1:2014
|
RAILWAY APPLICATIONS - POWER CONVERTERS INSTALLED ON BOARD ROLLING STOCK - PART 1: CHARACTERISTICS AND TEST METHODS |
EN 62271-100 : 2009 AMD 2/COR 18
|
HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 100: ALTERNATING-CURRENT CIRCUIT-BREAKERS (IEC 62271-100:2008/A2:2017/COR1:2018) |
S.R. CLC/TR 50488:2007
|
RAILWAY APPLICATIONS - SAFETY MEASURES FOR THE PERSONNEL WORKING ON OR NEAR OVERHEAD CONTACT LINES |
EN 62488-2:2017
|
Power line communication systems for power utility applications - Part 2: Analogue power line carrier terminals or APLC |
I.S. EN 60903:2003
|
LIVE WORKING - GLOVES OF INSULATING MATERIAL |
NF EN 60974-8 : 2009
|
ARC WELDING EQUIPMENT - PART 8: GAS CONSOLES FOR WELDING AND PLASMA CUTTING SYSTEMS |
NF EN 61095 : 2009
|
ELECTROMECHANICAL CONTACTORS FOR HOUSEHOLD AND SIMILAR PURPOSES |
I.S. EN 62310-3:2008
|
STATIC TRANSFER SYSTEMS (STS) - PART 3: METHOD FOR SPECIFYING PERFORMANCE AND TEST REQUIREMENTS |
NFC 01 141 : 2004
|
ELECTROTECHNICAL VOCABULARY - PART 141: POLYPHASE SYSTEMS AND CIRCUITS |
I.S. EN 61010-031:2015
|
SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 031: SAFETY REQUIREMENTS FOR HAND-HELD PROBE ASSEMBLIES FOR ELECTRICAL MEASUREMENT AND TEST |
NFC 01 131 : 2002 AMD 2 2014
|
INTERNATIONAL ELECTROTECHNICAL VOCABULARY - PART 131: CIRCUIT THEORY |
I.S. EN 60646:1999
|
TEST METHODS FOR CRUCIBLE INDUCTION FURNACES |
I.S. EN 60601- 1:2006&A1:2013&AC:2014&A12:2014
|
MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE |
CSA C22.2 No. 60079-2 : 2016
|
EXPLOSIVE ATMOSPHERES - PART 2: EQUIPMENT PROTECTION BY PRESSURIZED ENCLOSURE 'P' |
CEI EN 62310-1 : 2006
|
STATIC TRANSFER SYSTEMS (STS) - PART 1: GENERAL AND SAFETY REQUIREMENTS |
IEC 61058-1:2016
|
Switches for appliances - Part 1: General requirements |
BS EN 62683:2015
|
Low-voltage switchgear and controlgear. Product data and properties for information exchange |
I.S. EN 61243-3:2014
|
LIVE WORKING - VOLTAGE DETECTORS - PART 3: TWO-POLE LOW-VOLTAGE TYPE |
CAN/CSA-C22.2 NO. 60896-22:17
|
Stationary lead-acid batteries — Part 22: Valve regulated types - Requirements (Adopted IEC 60896-22:2004, first edition, 2004-02, with Canadian deviations) | Batteries stationnaires au plomb - Partie 22 : Types étanches à soupapes - Exigences (norme IEC 60896-22:2004 adoptée, première édition, 2004-02, avec exigences propres au Canada) |
NF EN 50174-1 : 2009 AMD 1 2011
|
INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 1: INSTALLATION SPECIFICATION AND QUALITY ASSURANCE |
I.S. EN 60832-1:2010
|
LIVE WORKING - INSULATING STICKS AND ATTACHABLE DEVICES - PART 1: INSULATING STICKS |
CEI EN 60146-1-1 : 2013
|
SEMICONDUCTOR CONVERTERS - GENERAL REQUIREMENTS AND LINE COMMUTATED CONVERTERS - PART 1-1: SPECIFICATION OF BASIC REQUIREMENTS |
PREN 50152-2 : DRAFT 2011
|
RAILWAY APPLICATIONS - FIXED INSTALLATIONS - PARTICULAR REQUIREMENTS FOR ALTERNATING CURRENT SWITCHGEAR - PART 2: DISCONNECTORS, EARTHING SWITCHES AND SWITCHES WITH NOMINAL VOLTAGE ABOVE 1 KV |
CLC/TS 61112:2006
|
Blankets of insulating material for electrical purposes |
CEI EN 62310-2 : 2007
|
STATIC TRANSFER SYSTEMS (STS) - PART 3: METHOD OF SPECIFYING THE PERFORMANCE AND TEST REQUIREMENTS |
UNE-EN 50508:2011
|
Multi-purpose insulating sticks for electrical operations on high voltage installations |
CEI EN 50152-2 : 2013
|
RAILWAY APPLICATIONS - FIXED INSTALLATIONS - PARTICULAR REQUIREMENTS FOR ALTERNATING CURRENT SWITCHGEAR - PART 2: DISCONNECTORS, EARTHING SWITCHES AND SWITCHES WITH NOMINAL VOLTAGE ABOVE 1 KV |
IEC 60532:2010
|
Radiation protection instrumentation - Installed dose rate meters, warning assemblies and monitors - X and gamma radiation of energy between 50 keV and 7 MeV |
I.S. EN 61010-1:2010
|
SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
I.S. EN 61936-1:2010
|
POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES |
IEC 61800-3:2017
|
Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods |
ISO/TS 81346-3:2012
|
Industrial systems, installations and equipment and industrial products Structuring principles and reference designations Part 3: Application rules for a reference designation system |
I.S. EN 61243-1:2005
|
LIVE WORKING - VOLTAGE DETECTORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C. |
IEC 60050-841:2004
|
International Electrotechnical Vocabulary (IEV) - Part 841: Industrial electroheat |
IEC 61010-031 REDLINE : 2ED 2015
|
SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 031: SAFETY REQUIREMENTS FOR HAND-HELD PROBE ASSEMBLIES FOR ELECTRICAL MEASUREMENT AND TEST |
I.S. EN 61230:2008
|
LIVE WORKING - PORTABLE EQUIPMENT FOR EARTHING OR EARTHING AND SHORT-CIRCUITING |
ISO 14617-3:2002
|
Graphical symbols for diagrams Part 3: Connections and related devices |
IEC 61137:1992
|
Radiation protection instrumentation - Installed personnel surface contamination monitoring assemblies - Low energy X and gamma emitters |
ISO/IEC 15045-2:2012
|
Information technology Home Electronic System (HES) gateway Part 2: Modularity and protocol |
IEC TS 62344:2013
|
Design of earth electrode stations for high-voltage direct current (HVDC) links - General guidelines |
I.S. EN 60974-13:2011
|
ARC WELDING EQUIPMENT - PART 13: WELDING CLAMP |
IEC 61058-1 REDLINE : 4ED 2016
|
SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
IEC 62310-2:2006
|
Static transfer systems (STS) - Part 2: Electromagnetic compatibility (EMC) requirements |
I.S. EN 62020:1999
|
ELECTRICAL ACCESSORIES - RESIDUAL CURRENT MONITORS FOR HOUSEHOLD AND SIMILAR USES (RCMS) |
I.S. EN 60664-1:2007
|
INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS |
IEC 60194:2015
|
Printed board design, manufacture and assembly - Terms and definitions |
I.S. EN 61534-1:2011
|
POWERTRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS |
IEC 61559-1:2009
|
Radiation protection instrumentation in nuclear facilities - Centralized systems for continuous monitoring of radiation and/or levels of radioactivity - Part 1: General requirements |
I.S. EN 62076:2006
|
INDUSTRIAL ELECTROHEATING INSTALLATIONS - TEST METHODS FOR INDUCTION CHANNEL AND INDUCTION CRUCIBLE FURNACES |
IEC 61131-2:2017
|
Industrial-process measurement and control - Programmable controllers - Part 2: Equipment requirements and tests |
IEC 61204-3:2016
|
Low-voltage switch mode power supplies - Part 3: Electromagnetic compatibility (EMC) |
IEC 61942:1997
|
Live working - Gloves and mitts with mechanical protection |
I.S. EN 60909-0:2016
|
SHORT-CIRCUIT CURRENTS IN THREE-PHASE A.C. SYSTEMS - PART 0: CALCULATION OF CURRENTS |
IEC 61558-1 REDLINE : 3ED 2017
|
SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF - PART 1: GENERAL REQUIREMENTS AND TESTS |
IEC TS 61994-4-2:2011
|
Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection - Glossary - Part 4-2: Piezoelectric and dielectric materials - Piezoelectric ceramics |
IEC 60050-851:2008
|
International Electrotechnical Vocabulary (IEV) - Part 851: Electric welding |
IEC 60050-141:2004
|
International Electrotechnical Vocabulary (IEV) - Part 141: Polyphase systems and circuits |
EN 50174-1:2009/A2:2014
|
INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 1: INSTALLATION SPECIFICATION AND QUALITY ASSURANCE |
EN 60269-6:2011
|
Low-voltage fuses - Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems |
IEC 61481:2001+AMD1:2002+AMD2:2004 CSV
|
Live working - Portable phase comparators for use on voltages from 1 kV to 36 kV a.c. |
IEC 61479:2001+AMD1:2002 CSV
|
Live working - Flexible conductor covers (line hoses) of insulating material |
BS EN 60601-1 : 2006
|
MEDICAL ELECTRICAL EQUIPMENT PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE |
95/204309 DC : DRAFT APRIL 1995
|
RESIDUAL CURRENT DEVICES WITHOUT INTEGRAL OVERCURRENT PROTECTION INCORPORATED IN OR ASSOCIATED WITH FIXED SOCKET-OUTLETS (SRCDS) |
IEC 61987-1:2006
|
Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 1: Measuring equipment with analogue and digital output |
PD IEC/TS 62548:2013
|
Photovoltaic (PV) arrays. Design requirements |
IEC 61534-1:2011+AMD1:2014 CSV
|
Powertrack systems - Part 1: General requirements |
95/214868 DC : 0
|
PREN 50178 - ELECTRONIC EQUIPMENT FOR USE IN POWER INSTALLATIONS |
UNE-EN 50522:2012
|
Earthing of power installations exceeding 1 kV a.c. |
IEC 60832-1:2010
|
Live working - Insulating sticks and attachable devices - Part 1: Insulating sticks |
IEC 60079-30-1:2007
|
Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements |
IEC 61666:2010
|
Industrial systems, installations and equipment and industrial products - Identification of terminals within a system |
IEC 60855:1985
|
Insulating foam-filled tubes and solid rods for live working |
IEC 60871-1:2014
|
Shunt capacitors for a.c. power systems having a rated voltage above 1 000 V - Part 1: General |
16/30296081 DC : 0
|
BS EN 60077-1 ED. 2.0 - RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 1: GENERAL SERVICE CONDITIONS AND GENERAL RULES |
IEC 62310-3:2008
|
Static transfer systems (STS) - Part 3: Method for specifying performance and test requirements |
IEC 60896-22:2004
|
Stationary lead-acid batteries - Part 22: Valve regulated types - Requirements |
IEC 60495:1993
|
Single sideband power-line carrier terminals |
IEC 61439-1:2011
|
Low-voltage switchgear and controlgear assemblies - Part 1: General rules |
IEC 61243-5:1997
|
Live working - Voltage detectors - Part 5: Voltage detecting systems (VDS) |
BS EN 1330-1:2014
|
Non destructive testing. Terminology List of general terms |
IEC TR 62461:2015
|
Radiation protection instrumentation - Determination of uncertainty in measurement |
EN 60669-1:2018
|
Switches for household and similar fixed electrical installations - Part 1: General requirements |
IEC 62271-204:2011
|
High-voltage switchgear and controlgear - Part 204: Rigid gas-insulated transmission lines for rated voltage above 52 kV |
IEC 60895:2002
|
Live working - Conductive clothing for use at nominal voltage up to 800 kV a.c. and +/- 600 kV d.c. |
13/30292412 DC : 0
|
BS EN 62683 - PRODUCT DATA AND PROPERTIES FOR INFORMATION EXCHANGE |
UNE-EN 50152-3-3:2016
|
Railway applications - Fixed installations - Particular requirements for a.c. switchgear - Part 3-3: Measurement, control and protection devices for specific use in a.c. traction systems - Voltage transformers |
IEC 62086-1:2001
|
Electrical apparatus for explosive gas atmospheres - Electrical resistance trace heating - Part 1: General and testing requirements |
11/30242646 DC : DRAFT FEB 2011
|
BS EN 62282-2 - FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES |
IEC 61058-2-4:1995+AMD1:2003 CSV
|
Switches for appliances - Part 2-4: Particular requirements for independently mounted switches |
14/30315309 DC : 0
|
BS EN 61204-3 - LOW VOLTAGE POWER SUPPLIES, D.C. OUTPUT - PART 3: ELECTROMAGNETIC COMPATIBILITY (EMC) |
09/30204029 DC : 0
|
BS EN 61439-1 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES |
IEC 60027-4:2006
|
Letter symbols to be used in electrical technology - Part 4: Rotating electric machines |
IEC 60268-5:2003+AMD1:2007 CSV
|
Sound system equipment - Part 5: Loudspeakers |
IEC 60404-8-1:2015
|
Magnetic materials - Part 8-1: Specifications for individual materials - Magnetically hard materials |
IEC 62491:2008
|
Industrial systems, installations and equipment and industrial products - Labelling of cables and cores |
IEC 61747-1:1998+AMD1:2003 CSV
|
Liquid crystal and solid-state display devices - Part 1: Generic specification |
IEC 61330:1995
|
High-voltage/low voltage prefabricated substations |
IEC 60646:1992
|
Test methods for crucible induction furnaces |
IEC 60146-1-1:2009
|
Semiconductor converters - General requirements and line commutated converters - Part 1-1: Specification of basic requirements |
IEC 61478:2001+AMD1:2003 CSV
|
Live working - Ladders of insulating material |
IEC 61310-2:2007
|
Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking |
IEC 60695-10-3:2016
|
Fire hazard testing - Part 10-3: Abnormal heat - Mould stress relief distortion test |
08/30182527 DC : DRAFT MAY 2008
|
BS EN 50122-1 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRICAL SAFETY, EARTHING AND BONDING - PART 1: PROTECTIVE PROVISIONS AGAINST ELECTRIC SHOCK |
IEC 62271-109:2008+AMD1:2013 CSV
|
High-voltage switchgear and controlgear - Part 109: Alternating-current series capacitor by-pass switches |
IEC 60974-12:2011
|
Arc welding equipment - Part 12: Coupling devices for welding cables |
IEC 60255-5:2000
|
Electrical Relays - Part 5: Insulation coordination for measuring relays and protection equipment - Requirements and tests |
IEC 62282-2:2012
|
Fuel cell technologies - Part 2: Fuel cell modules |
IEC 62475:2010
|
High-current test techniques - Definitions and requirements for test currents and measuring systems |
IEC 62193:2003
|
Live working - Telescopic sticks and telescopic measuring sticks |
IEC 62040-3:2011
|
Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements |
IEC 61243-3:2014
|
Live working - Voltage detectors - Part 3: Two-pole low-voltage type |
IEC TS 62282-1:2013
|
Fuel cell technologies - Part 1: Terminology |
IEC 61287-1:2014
|
Railway applications - Power converters installed on board rolling stock - Part 1: Characteristics and test methods |
IEC 60404-1:2016
|
Magnetic materials - Part 1: Classification |
IEC 62520:2011
|
Railway applications - Electric traction - Short-primary type linear induction motors (LIM) fed by power converters |
IEC 60255-11:2008
|
Measuring relays and protection equipment - Part 11: Voltage dips, short interruptions, variations and ripple on auxiliary power supply port |
IEC 60947-1:2007+AMD1:2010+AMD2:2014 CSV
|
Low-voltage switchgear and controlgear - Part 1: General rules |
08/30160532 DC : DRAFT MAY 2008
|
BS EN 50122-1 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRICAL SAFETY, EARTHING AND BONDING - PART 1: PROTECTIVE PROVISIONS AGAINST ELECTRIC SHOCK |
IEC TR 62271-307:2015
|
High-voltage switchgear and controlgear - Part 307: Guidance for the extension of validity of type tests of AC metal and solid-insulation enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV |
IEC 60664-1:2007
|
Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
IEC 62076:2006
|
Industrial electroheating installations - Test methods for induction channel and induction crucible furnaces |
IEC 61850-7-420:2009
|
Communication networks and systems for power utility automation - Part 7-420: Basic communication structure - Distributed energy resources logical nodes |
IEC 61229:1993+AMD1:1998+AMD2:2002 CSV
|
Rigid protective covers for live working on a.c. installations |
IEC 61095:2009
|
Electromechanical contactors for household and similar purposes |
CISPR 16-2-2:2010
|
Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-2: Methods of measurement of disturbances and immunity - Measurement of disturbance power |
IEC 60127-6:2014
|
Miniature fuses - Part 6: Fuse-holders for miniature fuse-links |
BS EN 61936-1 : 2010
|
POWER INSTALLATIONS EXCEEDING 1 KV A.C - PART 1: COMMON RULES |
IEC 61439-1:2020
|
Low-voltage switchgear and controlgear assemblies - Part 1: General rules |
IEC 60349-4:2012
|
Electric traction - Rotating electrical machines for rail and road vehicles - Part 4: Permanent magnet synchronous electrical machines connected to an electronic converter |
IEC 60896-21:2004
|
Stationary lead-acid batteries - Part 21: Valve regulated types - Methods of test |
IEC 62488-1:2012
|
Power line communication systems for power utility applications - Part 1: Planning of analogue and digital power line carrier systems operating over EHV/HV/MV electricity grids |
IEC 60846:2002
|
Radiation protection instrumentation - Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation |
IEC 60349-1:2010
|
Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic converter-fed alternating current motors |
UNE-EN 60349-1:2011
|
Electric traction - Rotating electrical machines for rail and road vehicles -- Part 1: Machines other than electronic converter-fed alternating current motors |
BS EN 60077-1:2017
|
Railway applications. Electric equipment for rolling stock General service conditions and general rules |
BS IEC 62548:2016
|
Photovoltaic (PV) arrays. Design requirements |
UNE-EN 61936-1:2012
|
Power installations exceeding 1 kV a.c. -- Part 1: Common rules |
IEC 60884-1:2002+AMD1:2006+AMD2:2013 CSV
|
Plugs and socket-outlets for household and similar purposes - Part1: General requirements |
IEC 61236:2010
|
Live working - Saddles, stick clamps and their accessories |
16/30301661 DC : 0
|
BS EN 61439-1 ED3.0 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES |
BS 7822-1:1995
|
Insulation coordination for equipment within low-voltage systems Principles, requirements and tests |
IEC 60325:2002
|
Radiation protection instrumentation - Alpha, beta and alpha/beta (beta energy >60 keV) contamination meters and monitors |
BS EN 62282-2:2012
|
Fuel cell technologies Fuel cell modules |
UNE-EN 61243-3:2015
|
Live working - Voltage detectors - Part 3: Two-pole low-voltage type |
UNE-EN 60079-2:2015
|
Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure "p" |
IEC 60027-7:2010
|
Letter symbols to be used in electrical technology - Part 7: Power generation, transmission and distribution |
UNE-EN 62282-2:2012
|
Fuel cell technologies - Part 2: Fuel cell modules |
IEC 60761-1:2002
|
Equipment for continuous monitoring of radioactivity in gaseous effluents - Part 1: General requirements |
EN 61204-3:2000
|
Low voltage power supplies, d.c. output - Part 3: Electromagnetic compatibility (EMC) |
EN 61310-2:2008
|
Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking |
EN 60027-4:2007
|
Letter symbols to be used in electrical technology - Part 4: Rotating electrical machines |
CEI 18-61 : 2013
|
MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS AND CONDITIONS |
EN 61481:2001/A2:2005
|
LIVE WORKING - PORTABLE PHASE COMPARATORS FOR USE ON VOLTAGES FROM 1 KV TO 36 KV A.C. |
EN 62271-204:2011
|
High-voltage switchgear and controlgear - Part 204: Rigid gas-insulated transmission lines for rated voltage above 52 kV |
EN 61526:2013
|
Radiation protection instrumentation - Measurement of personal dose equivalents Hp(10) and Hp(0,07) for X, gamma, neutron and beta radiations - Direct reading personal dose equivalent meters |
EN 62520:2011
|
Railway applications - Electric traction - Short-primary type linear induction motors (LIM) fed by power converters |
EN 1330-1:2014
|
NON DESTRUCTIVE TESTING - TERMINOLOGY - PART 1: LIST OF GENERAL TERMS |
I.S. EN 61229:1999
|
RIGID PROTECTIVE COVERS FOR LIVE WORKING ON A.C. INSTALLATIONS |
I.S. EN 60871-1:2014
|
SHUNT CAPACITORS FOR A.C. POWER SYSTEMS HAVING A RATED VOLTAGE ABOVE 1000 V - PART 1: GENERAL |
BS EN 60846-1:2014
|
Radiation protection instrumentation. Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation Portable workplace and environmental meters and monitors |
I.S. EN 60896-21:2004
|
STATIONARY LEAD-ACID BATTERIES - PART 21: VALVE REGULATED TYPES - METHODS OF TEST |
IEEE/IEC C37.60-2012
|
IEEE/IEC International Standard - High-voltage switchgear and controlgear - Part 111: Automatic circuit reclosers and fault interrupters for alternating current systems up to 38 kV |
PD IEC/TS 62282-1:2013
|
Fuel cell technologies Terminology |
CEI EN 60974-1 : 2013
|
ARC WELDING EQUIPMENT - PART 1: WELDING POWER SOURCES |
IEC 60349:1991
|
Electric traction. Rotating electrical machines for rail and road vehicles |
PD IEC/TR 60664-2-1:2011
|
Insulation coordination for equipment within low-voltage systems Application guide. Explanation of the application of the IEC 60664 series, dimensioning examples and dielectric testing |
DIN ISO/TS 81346-3;DIN SPEC 1330:2013-09
|
INDUSTRIAL SYSTEMS, INSTALLATIONS AND EQUIPMENT AND INDUSTRIAL PRODUCTS - STRUCTURING PRINCIPLES AND REFERENCE DESIGNATIONS - PART 3: APPLICATION RULES FOR A REFERENCE DESIGNATION SYSTEM (ISO/TS 81346-3:2012) |
CEI 32-14 : 1998
|
HIGH-VOLTAGE FUSES - PART 2: EXPULSION FUSES |
BS EN 60896-1:1992
|
Stationary lead-acid batteries. General requirements and methods of test Vented types |
BS IEC 60092-509:2011
|
Electrical installations in ships Operation of electrical installations |
BS EN 62310-3:2008
|
Static transfer systems (STS) Method for specifying performance and test requirements |
99/201503 DC : 0
|
IEC 61479 ED.1 - LIVE WORKING - CONDUCTOR COVERS (LINE HOSES) OR INSULATING MATERIAL FOR ELECTRICAL PURPOSES |
CEI EN 60832-1 : 2011
|
LIVE WORKING - INSULATING STICKS AND ATTACHABLE DEVICES - PART 1: INSULATING STICKS |
11/30253811 DC : 0
|
BS IEC 62755 - RADIATION PROTECTION INSTRUMENTATION - DATA FORMAT FOR RADIATION INSTRUMENTS USED IN THE DETECTION OF ILLICIT TRAFFICKING OF RADIOACTIVE MATERIALS |
CEI EN 60255-5 : 2001
|
ELECTRICAL RELAYS - PART 5: INSULATION COORDINATION FOR MEASURING RELAYS AND PROTECTION EQUIPMENT REQUIREMENTS AND TESTS |
NF EN 50321 : 2000
|
ELECTRICALLY INSULATING FOOTWEAR FOR WORKING ON LOW VOLTAGE INSTALLATIONS |
IEC 60404-14:2002
|
Magnetic materials - Part 14: Methods of measurement of the magnetic dipole moment of a ferromagnetic material specimen by the withdrawal or rotation method |
EN 62020:1998/A1:2005
|
ELECTRICAL ACCESSORIES - RESIDUAL CURRENT MONITORS FOR HOUSEHOLD AND SIMILAR USES (RCMS) |
BS 7494-2:1993
|
Performance and testing of teleprotection equipment of power systems Analogue comparison system |
BS 7739-1:1994
|
Specification for capacitive type to be used for voltage exceeding 1 kV a.c.Voltage detectors |
UNE-IEC/TS 62282-1:2013
|
Fuel cell technologies - Part 1: Terminology |
09/30166871 DC : 0
|
BS EN 62520 - RAILWAY APPLICATIONS - ELECTRIC TRACTION - SHORT-PRIMARY TYPE LINEAR INDUCTION MOTORS FED BY POWER CONVERTERS |
BS EN 60298:1996
|
A.C. metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV |
BS EN 60255-11:2010
|
Measuring relays and protection equipment Voltage dips, short interruptions, variations and ripple on auxiliary power supply port |
13/30294866 DC : 0
|
BS EN 61058-1 - SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
15/30265353 DC : 0
|
BS EN 62271-1 ED 2 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: COMMON SPECIFICATIONS FOR ALTERNATING CURRENT SWITCHGEAR AND CONTROLGEAR |
03/307802 DC : DRAFT MAY 2003
|
EN 61008-1 - RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCB'S) - PART 1: GENERAL RULES |
IEEE C62.33-1982
|
IEEE Standard Test Specifications for Varistor Surge-Protective Devices |
BS EN 62271-109 : 2009
|
HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 109: ALTERNATING-CURRENT SERIES CAPACITOR BY-PASS SWITCHES |
99/201502 DC : 0
|
|
01/205488 DC : DRAFT AUG 2001
|
IEC 61318 ED.2 - LIVE WORKING - QUALITY ASSURANCE PLANS APPLICABLE TO TOOLS, DEVICES AND EQUIPMENT |
BS EN 60855:1997
|
Insulating foam-filled tubes and solid rods for live working |
DIN ISO/TS 16952-1:2007-03
|
TECHNICAL PRODUCT DOCUMENTATION - REFERENCE DESIGNATION SYSTEM - PART 1: GENERAL APPLICATION RULES |
UNE-IEC 60050-447:2011
|
International Electrotechnical Vocabulary (IEV) - Part 447: Measuring relays |
17/30368308 DC : 0
|
BS EN 62271-109 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 109: ALTERNATING-CURRENT SERIES CAPACITOR BY-PASS SWITCHES |
BS EN 60974-11:2010
|
Arc welding equipment Electrode holders |
03/304151 DC : DRAFT MAR 2003
|
IEC 60519-10-1 - SAFETY IN ELECTROHEAT INSTALLATIONS - PART 10-1: PARTICULAR REQUIREMENTS FOR ELECTRICAL RESISTANCE TRACE HEATING SYSTEMS FOR INDUSTRIAL AND COMMERCIAL APPLICATIONS |
BS EN 60027-7:2010
|
Letter symbols to be used in electrical technology Power generation, transmission and distribution |
NF EN 50286 : 2005
|
ELECTRICAL INSULATING PROTECTIVE CLOTHING FOR LOW-VOLTAGE INSTALLATIONS |
BS EN 60896-11:2003
|
Stationary lead-acid batteries. General requirements and methods of test Vented types. General requirements and methods of tests |
NF EN 61479 : 2001 AMD 1 2003
|
LIVE WORKING - FLEXIBLE CONDUCTOR COVERS (LINE HOSES) OF INSULATING MATERIAL |
BS EN IEC 61281-1:2018
|
Fibre optic communication subsystems Generic specification |
07/30170221 DC : DRAFT AUG 2007
|
BS EN 50174-1 - INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 1: SPECIFICATION AND QUALITY ASSURANCE |
NF EN 6071999 : 1999
|
ELECTRICAL ACCESSORIES - CORD SETS AND INTERCONNECTION CORD SETS |
BS IEC 62706:2012
|
Radiation protection instrumentation. Environmental, electromagnetic and mechanical performance requirements |
11/30206274 DC : 0
|
BS EN 60349-4 - ELECTRIC TRACTION ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 4: PERMANENT MAGNET SYNCHRONOUS ELECTRICAL MACHINES CONNECTED TO AN ELECTRONIC CONVERTER |
03/100521 DC : DRAFT MAR 2003
|
IEC 62271-107 ED.1.0 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 107: ALTERNATING CURRENT FUSED CIRCUIT-SWITCHERS FOR RATED VOLTAGES ABOVE 1 KV UP TO AND INCLUDING 52 KV |
BS EN 62076:2006
|
Industrial electroheating installations. Test methods for induction channel and induction crucible furnaces |
07/30126760 DC : 0
|
IEC 61559-1 - RADIATION PROTECTION INSTRUMENTATION - INSTRUMENTATION AND CONTROL OF NUCLEAR FACILITIES - PART 1: CENTRALIZED SYSTEM FOR CONTINUOUS MONITORING OF RADIATION AND/OR LEVELS OF RADIOACTIVITY |
VDE 0102-10 : 1998 COR 1 2010
|
SHORT-CIRCUIT CURRENTS - SHORT-CIRCUIT CURRENTS IN D.C. AUXILIARY INSTALLATIONS IN POWER PLANTS AND SUBSTATIONS - PART 1: CALCULATION OF SHORT-CIRCUIT CURRENTS |
09/30203506 DC : 0
|
BS EN 61534-1 - POWER TRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS |
07/30167448 DC : 0
|
BS EN 60079-13 - EXPLOSIVE ATMOSPHERES - PART 13: EQUIPMENT PROTECTION BY PRESSURIZED ROOM "P" |
BS EN 60846:2004
|
Radiation protection instrumentation. Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation |
10/30216008 DC : 0
|
BS EN 61326-1 - ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 1: GENERAL REQUIREMENTS |
11/30175582 DC : 0
|
BS EN 60050-395 - INTERNATIONAL ELECTROTECHNICAL VOCABULARY - PART 395: NUCLEAR INSTRUMENTATION - PHYSICAL PHENOMENA, BASIC CONCEPTS, INSTRUMENTS, SYSTEMS, EQUIPMENT AND DETECTORS |
07/30174621 DC : DRAFT DEC 2007
|
BS EN 62271-109 AMD1 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 109: ALTERNATING CURRENT SERIES CAPACITOR BYPASS SWITCHES |
IEC TR 60146-6:1992
|
Semiconductor convertors - Part 6: Application guide for the protection of semiconductor convertors against overcurrent by fuses |
UNE-EN 60974-4:2011
|
Arc welding equipment - Part 4: Periodic inspection and testing |
98/230636 DC : DRAFT MARCH 98
|
DRAFT IEC 61010-2-031 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT CONTROL AND LABORATORY USE 2-031: SAFETY REQUIREMENTS FOR HAND-HELD PROBE ASSEMBLIES FOR ELECTRICAL MEASUREMENT TEST |
I.S. HD 50573-5-57:2014
|
CO-ORDINATION OF ELECTRICAL EQUIPMENT FOR PROTECTION, ISOLATION, SWITCHING AND CONTROL |
16/30332632 DC : 0
|
BS EN 62932-1 ED 1.0 - FLOW BATTERY SYSTEMS FOR STATIONARY APPLICATIONS - PART 1: GENERAL ASPECTS, TERMINOLOGY AND DEFINITIONS |
BS EN 62020:1999
|
Electrical accessories. Residual current monitors for household and similar uses (RCMs) |
BS IEC 61892-3:2012
|
Mobile and fixed offshore units. Electrical installations Equipment |
11/30244172 DC : 0
|
BS EN 61326-1 IEC 61326-1 ED. 2 - ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE EMC REQUIREMENTS - PART 1: GENERAL REQUIREMENTS |
BS EN 62271-204:2011
|
High-voltage switchgear and controlgear Rigid gas-insulated transmission lines for rated voltage above 52 kV |
BS EN 61643-11 : 2012
|
LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 11: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER SYSTEMS - REQUIREMENTS AND TEST METHODS |
UNE-EN 60027-4:2011
|
Letter symbols to be used in electrical technology -- Part 4: Rotating electric machines |
BS EN 60269-6:2011
|
Low-voltage fuses Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems |
14/30303121 DC : 0
|
BS EN 60404-1 ED. 3 - MAGNETIC MATERIALS - PART 1: CLASSIFICATIONS |
BS IEC 61112:1992
|
Blankets of insulating material for electrical purposes |
04/30068313 DC : DRAFT APR 2004
|
IEC 62086-1 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - ELECTRICAL RESISTANCE TRACE HEATING - PART 1: GENERAL AND TESTING REQUIREMENTS |
CSA E61131.2 :2006
|
PROGRAMMABLE CONTROLLERS - PART 2: EQUIPMENT REQUIREMENTS AND TESTS |
NF EN 60079-30-1 : 2007
|
EXPLOSIVE ATMOSPHERES - PART 30-1: ELECTRICAL RESISTANCE TRACE HEATING - GENERAL AND TESTING REQUIREMENTS |
IEC TS 61850-2:2003
|
Communication networks and systems in substations - Part 2: Glossary |
BS EN 60896-22:2004
|
Stationary lead-acid batteries Valve regulated types. Requirements |
BS 61535:2006
|
Installation couplers intended for permanent connection in fixed installations |
I.S. EN 61481:2001
|
LIVE WORKING - PORTABLE PHASE COMPARATORS FOR VOLTAGES OF 1 KV TO 36 KV A.C. |
CEI 23-50 : 2007
|
PLUGS AND SOCKET-OUTLETS FOR HOUSEHOLD AND SIMILAR PURPOSES GENERAL REQUIREMENTS |
IEC 60834-2:1993
|
Performance and testing of teleprotection equipment of power systems - Part 2: Analogue comparison systems |
CEI 23-96 : 2010
|
SOCKET-OUTLETS INTERLOCKED WITH A RESIDUAL CURRENT DEVICE WITH INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (PID) |
UNE-EN 62683:2016
|
Low-voltage switchgear and controlgear - Product data and properties for information exchange |
BS EN 60761-1:2004
|
Equipment for continuous monitoring radioactivity in gaseous effluents General requirements |
I.S. EN 62310-2:2007
|
STATIC TRANSFER SYSTEMS (STS) - PART 2: ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS |
BS EN 61850-7-420:2009
|
Communication networks and systems for power utility automation Basic communication structure. Distributed energy resources logical nodes |
CSA E61131.2 : 2006 : R2016
|
PROGRAMMABLE CONTROLLERS - PART 2: EQUIPMENT REQUIREMENTS AND TESTS |
02/202972 DC : 0
|
IEC 60832-1. ED.2 - LIVE WORKING - INSULATING STICKS AND ATTACHABLE UNIVERSAL DEVICES (FITTINGS) - PART 1: INSULATING STICKS WITH PERMANENTLY ATTACHED FITTINGS |
I.S. EN 60269-6:2011
|
LOW-VOLTAGE FUSES - PART 6: SUPPLEMENTARY REQUIREMENTS FOR FUSE-LINKS FOR THE PROTECTION OF SOLAR PHOTOVOLTAIC ENERGY SYSTEMS |
I.S. EN 60349-2:2010
|
ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 2: ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS |
NF EN 62086-1 : 2006
|
ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - ELECTRICAL RESISTANCE TRACE HEATING - PART 1: GENERAL AND TESTING REQUIREMENTS |
BS EN 60146-1-1:2010
|
Semiconductor converters. General requirements and line commutated converters Specification of basic requirements |
09/30182101 DC : 0
|
BS EN 60349-1 - ELECTRICAL TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 1: MACHINES OTHER THAN ELECTRONIC CONVERTOR-FED ALTERNATING CURRENT MOTORS |
CEI EN 60974-4 : 2012
|
ARC WELDING EQUIPMENT - PART 4: PERIODIC INSPECTION AND TESTING |
CSA CISPR 16-2-3 : 2012 : R2017
|
SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 2-3: METHODS OF MEASUREMENT OF DISTURBANCES AND IMMUNITY - RADIATED DISTURBANCE MEASUREMENTS |
I.S. EN 61204-3:2000
|
LOW VOLTAGE POWER SUPPLIES, D.C. OUTPUT - PART 3: ELECTROMAGNETIC COMPATIBILITY (EMC) |
06/30159668 DC : 0
|
BS EN 50508 - MULTI-PURPOSE INSULATING STICKS FOR ELECTRICAL OPERATIONS ON HIGH VOLTAGE INSTALLATIONS |
BIS IS 12640-1 : 2008
|
RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS FOR HOUSEHOLD AND SIMILAR USES - PART 1: CIRCUIT-BREAKERS WITHOUT INTEGRAL OVERCURRENT PROTECTION (RCCBS) |
I.S. EN 62475:2010
|
HIGH-CURRENT TEST TECHNIQUES - DEFINITIONS AND REQUIREMENTS FOR TEST CURRENTS AND MEASURING SYSTEMS |
UNE-EN 62475:2012
|
High-current test techniques - Definitions and requirements for test currents and measuring systems |
BS EN 60404-1:2017
|
Magnetic materials Classification |
BS EN 61010-1:2010+A1:2019
|
Safety requirements for electrical equipment for measurement, control, and laboratory use General requirements |
NF EN 62022 : 2008
|
INSTALLED MONITORS FOR THE CONTROL AND DETECTION OF GAMMA RADIATIONS CONTAINED IN RECYCLABLE OR NON RECYCLABLE MATERIALS TRANSPORTED BY VEHICLES |
NF EN 60761-1 : 2005
|
EQUIPMENT FOR CONTINUOUS MONITORING RADIOACTIVITY IN GASEOUS EFFLUENTS - PART 1: GENERAL REQUIREMENTS |
BS EN 50152-2:2012
|
Railway applications. Fixed installations. Particular requirements for alternating current switchgear Disconnectors, earthing switches and switches with nominal voltage above 1 kV |
I.S. EN 60255-11:2010
|
MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 11: VOLTAGE DIPS, SHORT INTERRUPTIONS, VARIATIONS AND RIPPLE ON AUXILIARY POWER SUPPLY PORT |
EN 60974-11:2010
|
ARC WELDING EQUIPMENT - PART 11: ELECTRODE HOLDERS |
IEC TR 62518:2009
|
Rare earth sintered magnets - Stability of the magnetic properties at elevated temperatures |
EN 60974-13:2011
|
Arc welding equipment - Part 13: Welding clamp |
CSA ISO/IEC 15018 : 2005 : INC : AMD 1 : 2010 : R2015
|
INFORMATION TECHNOLOGY - GENERIC CABLING FOR HOMES |
I.S. EN 50365:2002
|
ELECTRICALLY INSULATING HELMETS FOR USE ON LOW VOLTAGE INSTALLATIONS |
I.S. EN 61236:2011
|
LIVE WORKING - SADDLES, STICK CLAMPS AND THEIR ACCESSORIES |
I.S. EN 60934:2001
|
CIRCUIT BREAKERS FOR EQUIPMENT (CBE) (IEC 60934:2000 (EQV)) |
I.S. EN 61148:2012
|
TERMINAL MARKINGS FOR VALVE DEVICE STACKS AND ASSEMBLIES AND FOR POWER CONVERSION EQUIPMENT (IEC 61148:2011 (EQV)) |
I.S. EN 60947-1:2007
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES |
I.S. EN 60846:2004
|
RADIATION PROTECTION INSTRUMENTATION - AMBIENT AND/OR DIRECTIONAL DOSE EQUIVALENT (RATE) METERS AND/OR MONITORS FOR BETA, X AND GAMMA RADIATION |
I.S. EN 62924:2017
|
RAILWAY APPLICATIONS - FIXED INSTALLATIONS - STATIONARY ENERGY STORAGE SYSTEM FOR DC TRACTION SYSTEMS |
UNE-EN 61230:2011
|
Live working - Portable equipment for earthing or earthing and short-circuiting |
BS EN 60896-21:2004
|
Stationary lead-acid batteries Valve regulated types. Methods of test |
I.S. EN 61850-7-420:2009
|
COMMUNICATION NETWORKS AND SYSTEMS FOR POWER UTILITY AUTOMATION - PART 7-420: BASIC COMMUNICATION STRUCTURE - DISTRIBUTED ENERGY RESOURCES LOGICAL NODES |
CEI EN 62310-3 : 2010
|
STATIC TRANSFER SYSTEMS (STS) - PART 3: METHOD FOR SPECIFYING PERFORMANCE AND TEST REQUIREMENTS |
CEI EN 81346-1 : 2012
|
INDUSTRIAL SYSTEMS, INSTALLATIONS AND EQUIPMENT AND INDUSTRIAL PRODUCTS - STRUCTURING PRINCIPLES AND REFERENCE DESIGNATIONS - PART 1: BASIC RULES |
EN 61666:2010
|
Industrial systems, installations and equipment and industrial products - Identification of terminals within a system |
I.S. EN 61095:2009
|
ELECTROMECHANICAL CONTACTORS FOR HOUSEHOLD AND SIMILAR PURPOSES |
I.S. EN 60984:1993
|
SLEEVES OF INSULATING MATERIAL FOR LIVE WORKING |
CSA C22.2 No. 62282-2 :2007
|
FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES |
NFC 01 394 : 2007
|
INTERNATIONAL ELECTROTECHNICAL VOCABULARY - PART 394: NUCLEAR INSTRUMENTATION - INSTRUMENTS |
I.S. EN 60974-12:2011
|
ARC WELDING EQUIPMENT - PART 12: COUPLING DEVICES FOR WELDING CABLES |
NF EN 60934 : 2001 AMD 2 2013
|
CIRCUIT-BREAKERS FOR EQUIPMENT (CBE) |
UNE-EN 60269-6:2012
|
Low-voltage fuses - Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems |
NF EN 61800 5-1 : 2007
|
ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-1: SAFETY REQUIREMENTS - ELECTRICAL, THERMAL AND ENERGY |
IEC 60050-482:2004
|
International Electrotechnical Vocabulary (IEV) - Part 482: Primary and secondary cells and batteries |
UNE-EN 60974-1:2013
|
Arc welding equipment - Part 1: Welding power sources |
BS IEC 61892-2:2012
|
Mobile and fixed offshore units. Electrical installations System design |
UNE-EN 62041:2011
|
Safety of transformers, reactors, power supply units and combinations thereof - EMC requirements |
CSA C22.2 No. 60601.1 : 2014
|
MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE |
CSA E1008.1 : 0
|
RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCBS) - PART 1: GENERAL RULES |
I.S. EN 60947-5-4:2003
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-4: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - METHODS OF ASSESSING THE PERFORMANCE OF LOW ENERGY CONTACTS - SPECIAL TESTS |
HD 50573-5-57:2014
|
Co-ordination of electrical equipment for protection, isolation, switching and control |
NF EN 60947-1 : 2007 AMD 2 2015
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES |
NF EN 60255-5 : 2001
|
ELECTRICAL RELAYS - PART 5: INSULATION COORDINATION FOR MEASURING RELAYS AND PROTECTION EQUIPMENT - REQUIREMENTS AND TESTS |
UNE-EN 60832-1:2011
|
Live working - Insulating sticks and attachable devices -- Part 1: Insulating sticks |
BIS IS 13774 : 2014
|
LIVE WORKING - GLOVES OF INSULATING MATERIAL |
CEI EN 60896-11 : 2004
|
STATIONARY LEAD-ACID BATTERIES - PART 11: VENTED TYPES GENERAL REQUIREMENTS AND METHODS OF TESTS |
EN 50328 : 2003 COR 2006
|
RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRONIC POWER CONVERTERS FOR SUBSTATIONS |
CEI EN 60974-11 : 2012
|
ARC WELDING EQUIPMENT - PART 11: ELECTRODE HOLDERS |
NFC 18 421 : 2007
|
MATTING OF INSULATING MATERIAL FOR ELECTRICAL PURPOSES |
IEC 62924:2017
|
Railway applications - Fixed installations - Stationary energy storage system for DC traction systems |
CEI EN 61800-4 : 2003
|
ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 4: GENERAL REQUIREMENTS - RATING SPECIFICATIONS FOR A/C/ POWER DRIVE SYSTEMS ABOVE 1000 V A.C. AND NOT EXCEEDING 35 KV |
I.S. EN 60027-4:2007
|
LETTER SYMBOLS TO BE USED IN ELECTRIC TECHNOLOGY - PART 4: ROTATING ELECTRIC MACHINES |
CSA C22.2 No. 61010.1 : 2012 : INC : UPD 2 : 2016
|
SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
IEC TR 61807:1999
|
Magnetic properties of magnetically hard materials at elevated temperatures - Methods of measurement |
IEC 61281-1:2017
|
Fibre optic communication subsystems - Part 1: Generic specification |
IEC 60974-4:2016
|
Arc welding equipment - Part 4: Periodic inspection and testing |
IEC 60077-1:2017
|
Railway applications - Electric equipment for rolling stock - Part 1: General service conditions and general rules |
I.S. EN 61800-4:2003
|
ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 4: GENERAL REQUIREMENTS - RATING SPECIFICATIONS FOR A.C. POWER DRIVE SYSTEMS ABOVE 1000 V A.C. AND NOT EXCEEDING 35 KV |
I.S. EN 61526:2013
|
RADIATION PROTECTION INSTRUMENTATION - MEASUREMENT OF PERSONAL DOSE EQUIVALENTS H[P](10) AND H[P](0,07) FOR X, GAMMA, NEUTRON AND BETA RADIATIONS - DIRECT READING PERSONAL DOSE EQUIVALENT METERS (IEC 61526:2010 (MOD)) |
IEC 60050-447:2010
|
International Electrotechnical Vocabulary (IEV) - Part 447: Measuring relays |
IEC TR 62225:2001
|
Guidance on terms for connectors and mechanical structures in electronic equipment |
IEC 62505-1:2016
|
Railway applications - Fixed installations - Particular requirements for AC switchgear - Part 1: Circuit-breakers with nominal voltage above 1 kV |
I.S. EN 60079-13:2017
|
EXPLOSIVE ATMOSPHERES - PART 13: EQUIPMENT PROTECTION BY PRESSURIZED ROOM 'P' AND ARTIFICIALLY VENTILATED ROOM 'V' |
I.S. EN 61235:1997
|
LIVE WORKING - INSULATING HOLLOW TUBES FOR ELECTRICAL PURPOSES |
I.S. EN 62271-109:2009
|
HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 109: ALTERNATING-CURRENT SERIES CAPACITOR BY-PASS SWITCHES (IEC 62271-109:2008 (EQV)) |
IEC 60404-1 REDLINE : 3ED 2016
|
MAGNETIC MATERIALS - PART 1: CLASSIFICATION |
I.S. EN 60896-22:2004
|
STATIONARY LEAD-ACID BATTERIES - PART 22: VALVE REGULATED TYPES - REQUIREMENTS |
EN 61987-10:2009/AC:2011
|
INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 10: LISTS OF PROPERTIES (LOPS) FOR INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL FOR ELECTRONIC DATA EXCHANGE - FUNDAMENTALS |
EN 61800-3 : 2004 AMD 1 2012
|
ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS (IEC 61800-3:2004/A1:2011) |
IEC 61000-4-21:2011
|
Electromagnetic compatibility (EMC) - Part 4-21: Testing and measurement techniques - Reverberation chamber test methods |
IEC 61660-1:1997
|
Short-circuit currents in d.c. auxiliary installations in power plants and substations - Part 1: Calculation of short-circuit currents |
UNE-EN 61439-1:2012
|
Low-voltage switchgear and controlgear assemblies - Part 1: General rules |
IEC 62551:2012
|
Analysis techniques for dependability - Petri net techniques |
IEC 62282-3-2:2006
|
Fuel cell technologies - Part 3-2: Stationary fuel cell power systems - Performance test methods |
IEC 61243-2:1995+AMD1:1999+AMD2:2002 CSV
|
Live working - Voltage detectors - Part 2: Resistive type to be used for voltages of 1 kV to 36 kV a.c. |
IEC 61148:2011
|
Terminal markings for valve device stacks and assemblies and for power conversion equipment |
UNE-EN 1330-1:2015
|
Non destructive testing - Terminology - Part 1: List of general terms |
IEC 60974-11:2010
|
Arc welding equipment - Part 11: Electrode holders |
IEC 60834-1:1999
|
Teleprotection equipment of power systems - Performance and testing - Part 1: Command systems |
02/714212 DC : DRAFT DEC 2002
|
IEC 62271-202 ED.1 - HIGH VOLTAGE/LOW VOLTAGE PREFABRICATED SUBSTATIONS |
IEC 60934:2000+AMD1:2007+AMD2:2013 CSV
|
Circuit-breakers for equipment (CBE) |
IEC 62020:1998+AMD1:2003 CSV
|
Electrical accessories - Residual current monitors for household and similar uses (RCMs) |
IEC 61010-1:2010+AMD1:2016 CSV
|
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements |
IEC 60269-6:2010
|
Low-voltage fuses - Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems |
IEC 60947-5-4:2002
|
Low-voltage switchgear and controlgear - Part 5-4: Control circuit devices and switching elements - Method of assessing the performance of low-energy contacts - Special tests |
IEC 62271-100:2008+AMD1:2012+AMD2:2017 CSV
|
High-voltage switchgear and controlgear - Part 100: Alternating-current circuit-breakers |
BS EN 61439-1:2011
|
Low-voltage switchgear and controlgear assemblies General rules |
IEC 60896-11:2002
|
Stationary lead-acid batteries - Part 11: Vented types - General requirements and methods of tests |
IEC 62271-200:2011
|
High-voltage switchgear and controlgear - Part 200: AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV |
15/30322229 DC : 0
|
BS EN 61800-5-1:2007/AMD 1 - ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-1: SAFETY REQUIREMENTS - ELECTRICAL, THERMAL AND ENERGY |
IEC 60601-1:2005+AMD1:2012 CSV
|
Medical electrical equipment - Part 1: General requirements for basic safety and essential performance |
DIN VDE 0805 : 1990 AMD 1 1991
|
SAFETY OF INFORMATION TECHNOLOGY EQUIPMENT INCLUDING ELECTRICAL BUSINESS EQUIPMENT |
EN 60079-2:2014/AC:2015
|
EXPLOSIVE ATMOSPHERES - PART 2: EQUIPMENT PROTECTION BY PRESSURIZED ENCLOSURE 'P' (IEC 60079-2:2014) |
EN 60077-1:2017
|
Railway applications - Electric equipment for rolling stock - Part 1: General service conditions and general rules |
EN 62488-1:2013
|
Power line communication systems for power utility applications - Part 1: Planning of analogue and digital power line carrier systems operating over EHV/HV/MV electricity grids |
EN 10332 : 2003
|
MAGNETIC MATERIALS - PERMANENT MAGNET (MAGNETICALLY HARD) MATERIALS - METHODS OF MEASUREMENT OF MAGNETIC PROPERTIES |
EN 62551 : 2012
|
ANALYSIS TECHNIQUES FOR DEPENDABILITY - PETRI NET TECHNIQUES (IEC 62551:2012) |
EN 61243-5:2001
|
Live working - Voltage detectors - Part 5: Voltage detecting systems (VDS) |
HD 60364-5-53:2015/A11:2017
|
LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-53: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR |
EN 50508:2009
|
Multi-purpose insulating sticks for electrical operations on high voltage installations |
EN 62282-3-2:2006
|
Fuel cell technologies - Part 3-2: Stationary fuel cell power systems - Performance test methods |
EN 61287-1:2014/AC:2014
|
RAILWAY APPLICATIONS - POWER CONVERTERS INSTALLED ON BOARD ROLLING STOCK - PART 1: CHARACTERISTICS AND TEST METHODS (IEC 61287-1:2014) |
EN 50237:1997
|
Gloves and mitts with mechanical protection for electrical purposes |
EN 61236:2011
|
Live working - Saddles, stick clamps and their accessories |
EN 61987-1:2007
|
Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 1: Measuring equipment with analogue and digital output |
EN 62076:2006
|
Industrial electroheating installations - Test methods for induction channel and induction crucible furnaces |
EN 50522:2010
|
Earthing of power installations exceeding 1 kV a.c. |
EN 50152-2:2012
|
RAILWAY APPLICATIONS - FIXED INSTALLATIONS - PARTICULAR REQUIREMENTS FOR ALTERNATING CURRENT SWITCHGEAR - PART 2: DISCONNECTORS, EARTHING SWITCHES AND SWITCHES WITH NOMINAL VOLTAGE ABOVE 1 KV |
EN 60846-1:2014
|
Radiation protection instrumentation - Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation - Part 1: Portable workplace and environmental meters and monitors |
CISPR 16-2-3:2016 RLV
|
Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements |
EN 60934:2001/A2:2013
|
CIRCUIT BREAKERS FOR EQUIPMENT (CBE) (IEC 60934:2000/A2:2013) |
EN 60349-4:2013
|
Electric traction - Rotating electrical machines for rail and road vehicles - Part 4: Permanent magnet synchronous electrical machines connected to an electronic converter |
EN 61243-2:1997/A2:2002
|
LIVE WORKING - VOLTAGE DETECTORS - PART 2: RESISTIVE TYPE TO BE USED FOR VOLTAGES OF 1 KV TO 36 KV A.C. |
EN 60027-7:2010
|
Letter symbols to be used in electrical technology - Part 7: Power generation, transmission and distribution |
OVE/ONORM EN 62020 : AMD 1 2006
|
ELECTRICAL ACCESSORIES - RESIDUAL CURRENT MONITORS FOR HOUSEHOLD AND SIMILAR USES (RCMS) |
EN 60268-5:2003/A1:2009
|
SOUND SYSTEM EQUIPMENT - PART 5: LOUDSPEAKERS |
EN 60325:2004
|
Radiation protection instrumentation - Alpha, beta and alpha/beta (beta energy > 60 keV) contamination meters and monitors |
EN 61326:1997/A3:2003
|
|
EN 61330:1996
|
High-voltage/low-voltage prefabricated substations |
EN 60896-1:1991/A2:1992
|
STATIONARY LEAD-ACID BATTERIES - GENERAL REQUIREMENTS AND METHODS OF TEST - VENTED TYPES |
EN 60947-5-4:2003
|
Low-voltage switchgear and controlgear - Part 5-4: Control circuit devices and switching elements - Method of assessing the performance of low-energy contacts - Special tests |
EN 62041:2010
|
Safety of transformers, reactors, power supply units and combinations thereof - EMC requirements |
EN 81346-1:2009
|
Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations - Part 1: Basic rules |
EN 61000-4-21:2011
|
Electromagnetic compatibility (EMC) - Part 4-21: Testing and measurement techniques - Reverberation chamber test methods |
EN 60068-2-65:2013
|
Environmental testing - Part 2-65: Tests - Test Fg: Vibration - Acoustically induced method |
EN 62022 : 2007
|
INSTALLED MONITORS FOR THE CONTROL AND DETECTION OF GAMMA RADIATIONS CONTAINED IN RECYCLABLE OR NON-RECYCLABLE MATERIALS TRANSPORTED BY VEHICLES |
IEC 60364-7-712:2017 RLV
|
Low voltage electrical installations - Part 7-712: Requirements for special installations or locations - Solar photovoltaic (PV) power supply systems |
EN 60146-1-1:2010
|
Semiconductor converters - General requirements and line commutated converters - Part 1-1: Specification of basic requirements |
EN 61800-4:2003
|
Adjustable speed electrical power drive systems - Part 4: General requirements - Rating specifications for a.c. power drive systems above 1 000 V a.c. and not exceeding 35 kV |
EN 60846:2004
|
Radiation protection instrumentation - Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation |
EN 60834-1 : 1999
|
Teleprotection equipment of power systems - Performance and testing - Part 1: Command systems |
EN 62310-1:2005
|
Static transfer systems (STS) - Part 1: General and safety requirements |
EN 60255-11:2010
|
Measuring relays and protection equipment - Part 11: Voltage dips, short interruptions, variations and ripple on auxiliary power supply port |
EN 60349-1:2010
|
Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic converter-fed alternating current motors |
EN 50152-1 : 2012 AMD 1 2013
|
RAILWAY APPLICATIONS - FIXED INSTALLATIONS - PARTICULAR REQUIREMENTS FOR ALTERNATING CURRENT SWITCHGEAR - PART 1: CIRCUIT-BREAKERS WITH NOMINAL VOLTAGE ABOVE 1 KV |
EN 60832-2:2010
|
Live working - Insulating sticks and attachable devices - Part 2: Attachable devices |
IEC 60077-1:2017 RLV
|
Railway applications - Electric equipment for rolling stock - Part 1: General service conditions and general rules |
EN 60871-1:2014
|
Shunt capacitors for a.c. power systems having a rated voltage above 1 000 V - Part 1: General |
DIN EN 10332:2004-03
|
MAGNETIC MATERIALS - PERMANENT MAGNET (MAGNETICALLY HARD) MATERIALS - METHODS OF MEASUREMENT OF MAGNETIC PROPERTIES |
IEC 61709:2017
|
Electric components - Reliability - Reference conditions for failure rates and stress models for conversion |
EN 60139:2001
|
Preparation of outline drawings for cathode-ray tubes, their components, connections and gauges |
EN 60950:2000/corrigendum:2002
|
SAFETY OF INFORMATION TECHNOLOGY EQUIPMENT |
EN 60404-14:2002
|
Magnetic materials - Part 14: Methods of measurement of the magnetic dipole moment of a ferromagnetic material specimen by the withdrawal or rotation method |
EN 60974-1:2012
|
Arc welding equipment - Part 1: Welding power sources |
EN 60832-1:2010
|
Live working - Insulating sticks and attachable devices - Part 1: Insulating sticks |
EN 60404-8-1:2015
|
Magnetic materials - Part 8-1: Specifications for individual materials - Magnetically hard materials |
EN 61148:2012
|
Terminal markings for valve device stacks and assemblies and for power conversion equipment |
EN 61098:2007
|
Radiation protection instrumentation - Installed personnel surface contamination monitoring assemblies |
EN 60896-11:2003
|
Stationary lead-acid batteries - Part 11: Vented types - General requirements and methods of tests |
DIN VDE 0110-1 : 1997
|
INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS |
EN 60903 : 2003 COR 2005
|
LIVE WORKING - GLOVES OF INSULATING MATERIAL |
EN 61010-031:2015
|
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test |
EN 60896-21:2004
|
Stationary lead-acid batteries - Part 21: Valve regulated types - Methods of test |
EN 60127-6:2014
|
Miniature fuses - Part 6: Fuse-holders for miniature fuse-links |
EN 62193:2003
|
Live working - Telescopic sticks and telescopic measuring sticks |
EN 50321:1999
|
Electrically insulating footwear for working on low voltage installations |
EN 60761-1:2004
|
Equipment for continuous monitoring radioactivity in gaseous effluents - Part 1: General requirements |
EN 60349-2:2010
|
ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 2: ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS |
CEI 18-58 : 2013
|
MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 3: EQUIPMENT |
EN 60695-10-3:2016
|
Fire hazard testing - Part 10-3: Abnormal heat - Mould stress relief distortion test |
EN 60051-1:2017
|
Direct acting indicating analogue electrical measuring instruments and their accessories - Part 1: Definitions and general requirements common to all parts |
EN 62310-3:2008
|
Static transfer systems (STS) - Part 3: Method for specifying performance and test requirements |
EN 62491:2008
|
Industrial systems, installations and equipment and industrial products - Labelling of cables and cores |
EN 60646:1998
|
Test methods for crucible induction furnaces |
EN 61095:2009
|
Electromechanical contactors for household and similar purposes |
CEI EN IEC 61010-031:2023
|
Safety requirements for electrical equipment for measurement, control, and laboratory use Part 031: Safety requirements for hand-held and hand-manipulated probe assemblies for electrical test and measurement |
UNE-EN 55016-2-3:2017
|
Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements |
BS 6840-5(1995) : 1995 AMD 9409
|
SOUND SYSTEM EQUIPMENT - METHODS FOR SPECIFYING AND MEASURING THE CHARACTERISTICS OF LOUDSPEAKERS |