DIN 41612-7:1985-06
|
TWO-PART CONNECTORS FOR PRINTED BOARD, GRID 2,54 MM; DIMENSIONS OF TYPES U AND V |
DIN 41612-8:1987-10
|
TWO-PART CONNECTORS FOR PRINTED BOARDS, GRID 2,54 MM; DIMENSIONS OF TYPE M |
DIN 41612-2:1987-10
|
TWO-PART CONNECTORS FOR PRINTED BOARDS; GRID 2,54 MM; DIMENSIONS OF TYPES B, C AND D |
DIN 41612-9:1987-10
|
TWO-PART CONNECTORS FOR PRINTED BOARDS; GRIP 2,54 MM; DIMENSIONS OF TYPE E |
13/30279399 DC : 0
|
BS EN 60286-2 - PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING - PART 2: TAPE PACKAGING OF COMPONENTS WITH UNIDIRECTIONAL LEADS ON CONTINUOUS TAPES |
BS EN 61188-5-1:2002
|
Printed boards and assemblies. Design and use. Attachment (land/joint) considerations Attachment (land/joint) considerations. Generic requirements |
03/100395 DC : DRAFT APR 2003
|
EN 175101-809 - DETAIL SPECIFICATION - TWO-PART CONNECTORS FOR PRINTED BOARDS HAVING A GRID OF 2,54 MM, SHORT VERSION IN COMPLIANCE WITH CECC 75 101-801, WITH ASSESSED QUALITY |
CEI EN 60717 : 2013
|
METHOD FOR THE DETERMINATION OF THE SPACE REQUIRED BY CAPACITORS AND RESISTORS WITH UNIDIRECTIONAL TERMINATIONS |
DIN 41612-6:1990-06
|
TWO-PART CONNECTORS FOR PRINTED BOARD; GRID 2,54 MM; DIMENSIONS OF TYPES Q, R AND S |
IEC 60326-3:1991
|
Printed boards - Part 3: Design and use of printed boards |
EN 123600:1996
|
Sectional Specification: Flex-rigid multilayer printed boards with through connections |
EN 61188-5-1:2002
|
Printed boards and printed board assemblies - Design and use - Part 5-1: Attachment (land/joint) considerations - Generic requirements |
EN 60603-12 : 1998
|
Connectors for frequencies below 3 MHz for use with printed boards - Part 12: Detail specification for dimensions, general requirements and tests for a range of sockets designed for use with integrated circuits |
EN 60603-13:1998
|
Connectors for frequencies below 3 MHz for use with printed boards - Part 13: Detail specification for two-part connectors of assessed quality, for printed boards for basic grid of 2,54 mm (0,1 in), with free connectors for non-accessible insulation displacement terminations (ID) |
EN 60286-2:2015
|
Packaging of components for automatic handling - Part 2: Tape packaging of components with unidirectional leads on continuous tapes |
EN 62317-4:2005
|
Ferrite cores - Dimensions - Part 4: RM-cores and associated parts |
EN 61076-4-113:2003
|
Connectors for electronic equipment - Printed board connectors - Part 4-113: Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications |
95/208507 DC : 0
|
IEC 61188-5-3 - DESIGN AND USE OF PRINTED BOARDS AND PRINTED BOARD ASSEMBLIES - PART 5: SECTIONAL DESIGN AND USE REQUIREMENTS - ATTACHMENT (LAND/JOINT) CONSIDERATIONS - SECTION 3: COMPONENTS WITH GULL-WING LEADS ON TWO SIDES |
DIN 41612-3:1987-10
|
TWO-PART CONNECTORS FOR PRINTED BOARDS; GRID 2,54 MM; DIMENSIONS OF TYPES F AND G |
95/208509 DC : DRAFT JULY 1995
|
IEC 61188-5-5 - DESIGN AND USE OF PRINTED BOARDS AND PRINTED BOARD ASSEMBLIES - PART 5: SECTIONAL DESIGN AND USE REQUIREMENTS - ATTACHMENT (LAND/JOINT) CONSIDERATIONS - SECTION 5: COMPONENTS WITH GULL WING LEADS ON FOUR SIDES |
95/208508 DC : 0
|
IEC 61188-5-4 - DESIGN AND USE OF PRINTED BOARDS AND PRINTED BOARD ASSEMBLIES - PART 5: SECTIONAL DESIGN AND USE REQUIREMENTS - ATTACHMENT (LAND/JOINT) CONSIDERATIONS - SECTION 4: COMPONENTS WITH J LEADS ON TWO SIDES |
DIN 41612-1:1988-01
|
TWO-PART CONNECTORS FOR PRINTED BOARD, GRID 2,54 MM; COMMON MOUNTING FEATURES, SURVEY OF TYPES |
BS EN 61076-4-113:2003
|
Connectors for electronic equipment Printed board connectors with assessed quality Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications |
BS EN 60603-10:1998
|
Connectors for frequencies below 3 MHz for use with printed boards Two-part connectors for printed boards for basic grid of 2,54 mm (0,1 in), inverted type |
I.S. EN 62317-4:2006
|
FERRITE CORES - DIMENSIONS - PART 4: RM-CORES AND ASSOCIATED PARTS |
I.S. EN 60603-2:1998
|
CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS - PART 2: DETAIL SPECIFICATION FOR TWO-PART CONNECTORS WITH ASSESSED QUALITY, FOR PRINTED BOARDS, FOR BASIC GRID OF 2,54 MM (0,1 IN) WITH COMMON MOUNTING FEATURES |
NF EN 61076 4 113 : 2005
|
CONNECTORS FOR ELECTRONIC EQUIPMENT - PRINTED BOARD CONNECTORS - PART 4-113: DETAIL SPECIFICATION FOR TWO-PART CONNECTORS HAVING 5 ROWS WITH A GRID OF 2,54 MM FOR PRINTED BOARDS AND BACKPLANES IN BUS APPLICATIONS |
IEC 61188-5-1:2002
|
Printed boards and printed board assemblies - Design and use - Part 5-1: Attachment (land/joint) considerations - Generic requirements |
BS EN 60286-2:2015
|
Packaging of components for automatic handling Packaging of components with unidirectional leads on continuous tapes |
95/208506 DC : 0
|
IEC 61188-5-2 - DESIGN AND USE OF PRINTED BOARDS AND PRINTED BOARD ASSEMBLIES - PART 5: SECTIONAL DESIGN AND USE REQUIREMENTS - ATTACHMENT (LAND/JOINT) CONSIDERATIONS - SECTION 2: DISCRETE COMPONENTS |
I.S. EN 61076-4-113:2003
|
CONNECTORS FOR ELECTRONIC EQUIPMENT - PRINTED BOARD CONNECTORS - PART 4-113: DETAIL SPECIFICATION FOR TWO-PART CONNECTORS HAVING 5 ROWS WITH A GRID OF 2,54 MM FOR PRINTED BOARDS AND BACKPLANES IN BUS APPLICATIONS |
BS EN 60603-13:1998
|
Connectors for frequencies below 3 MHz for use with printed boards Detail specification for two-part connectors of assessed quality, for printed boards for basic grid of 2,54 mm (0,1 in) with free connectors for non-accessible insulation displacement terminations (ID) |
BS EN 60603-12:1998
|
Connectors for frequencies below 3 MHz for use with printed boards Detail specification for dimensions, general requirements and tests for a range of sockets designed for use with integrated circuits |
BS EN 60717:2012
|
Method for the determination of the space required by capacitors and resistors with unidirectional terminations |
IEC 60571-1:1990
|
Electronic equipment used on rail vehicles. Part 1: General requirements and tests for electronic equipment |
EN 175101-809:2004/corrigendum Jun. 2005
|
DETAIL SPECIFICATION: TWO-PART CONNECTORS FOR PRINTED BOARDS HAVING A GRID OF 2,54 MM, SHORT VERSION IN COMPLIANCE WITH CECC 75 101-801, WITH ASSESSED QUALITY |
IEC 61076-4-113:2002
|
Connectors for electronic equipment - Printed board connectors - Part 4-113: Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications |
IEC 60286-2:2015
|
Packaging of components for automatic handling - Part 2: Tape packaging of components with unidirectional leads on continuous tapes |
BS EN 60603-9:1998
|
Connectors for frequencies below 3 MHz for use with printed boards Two-part connectors for printed boards, backpanels and cable connectors, basic grid of 2,54 mm (0,1 in) |
BS EN 60603-2:1998
|
Connectors for frequencies below 3 MHz for use with printed boards Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features |
DIN IEC 60326-4:1993-09
|
PRINTED BOARDS - PART 4: SPECIFICATION FOR SINGLE AND DOUBLE SIDED PRINTED BOARDS WITH PLAIN HOLES |
BS EN 123800:1997
|
Harmonized system of quality assessment for electronic components. Sectional specification. Flexible multilayer printed boards with through connections |
BS EN 123600:1997
|
Harmonized system of quality assessment for electronic components. Sectional specification. Flex-rigid multilayer printed boards with through connections |
04/30116362 DC : DRAFT JULY 2004
|
IEC 60431 ED.3 - DIMENSIONS OF RM CORES MADE OF MAGNETIC OXIDES AND ASSOCIATED PARTS |
BS EN 62317-4:2005
|
Ferrite cores. Dimensions RM-cores and associated parts |
I.S. EN 60286-2:2015
|
PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING - PART 2: PACKAGING OF COMPONENTS WITH UNIDIRECTIONAL LEADS ON CONTINUOUS TAPES |
CEI EN 60286-2 : 2016
|
PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING - PART 2: PACKAGING OF COMPONENTS WITH UNIDIRECTIONAL LEADS ON CONTINUOUS TAPES |
I.S. EN 60431:1999
|
DIMENSIONS OF SQUARE CORES (RM-CORES) MADE OF MAGNETIC OXIDES AND ASSOCIATED PARTS |
I.S. EN 61188-5-1:2002
|
PRINTED BOARDS AND PRINTED BOARD ASSEMBLIES - DESIGN AND USE - PART 5-1: ATTACHMENT (LAND/JOINT) CONSIDERATIONS - GENERIC REQUIREMENTS |
IEC 60603-12:1992
|
Connectors for frequencies below 3 MHz for use with printed boards - Part 12: Detail specification for dimensions, general requirements and tests for a range of sockets designed for use with integrated circuits |
IEC 62317-4:2005
|
Ferrite cores - Dimensions - Part 4: RM-cores and associated parts |
IEC 60603-13:1995
|
Connectors for frequencies below 3 MHz for use with printed boards - Part 13: Detail specification for two-part connectors of assessed quality, for printed boards for basic grid of 2,54 mm (0,1 in), with free connectors for non-accessible insulation displacement terminations (ID) |
IEC 60717:2012
|
Method for the determination of the space required by capacitors and resistors with unidirectional terminations |
DIN IEC 60255-18 : 1984
|
ELECTRICAL RELAYS - PART 18: DIMENSIONS FOR GENERAL PURPOSE ALL-OR-NOTHING RELAYS |
10/30235870 DC : 0
|
BS EN 60717:1981/AMD1 - METHOD FOR DETERMINATION OF THE SPACE REQUIRED BY CAPACITORS AND RESISTORS WITH UNIDIRECTIONAL TERMINATIONS |
BS EN 60603-8:1998
|
Connectors for frequencies below 3 MHz for use with printed boards Two-part connectors for printed boards for basic grid of 2,54 mm (0,1 in), with square male contacts of 0,63 mm x 0,63 mm |
I.S. EN 60717:2012
|
METHOD FOR THE DETERMINATION OF THE SPACE REQUIRED BY CAPACITORS AND RESISTORS WITH UNIDIRECTIONAL TERMINATIONS (IEC 60717:2012 (EQV)) |
DIN 41612-4:1987-10
|
TWO-PART CONNECTORS FOR PRINTED BOARDS; GRID 2,54 MM; DIMENSIONS OF TYPE H |
BS EN 175101-802:2000
|
Harmonized system of quality assessment for electronic components. Detail specification Two-part connectors for printed boards for high number of contacts with basic grid of 2,54 mm on 3 or 4 rows |
06/30156414 DC : DRAFT SEP 2006
|
BS EN 60286-2 - PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING - PART 2: TAPE PACKAGING OF COMPONENTS WITH UNIDIRECTIONAL LEADS ON CONTINUOUS TAPES |
BS EN 175101-809:2004
|
Harmonized system of quality assessment for electronic components. Detail specification Two-part connectors for printed boards having a grid of 2,54 mm, short version in compliance with CECC 75 101-801, with assessed quality |
BS EN 123700:1997
|
Harmonized system of quality assessment for electronic components. Sectional specification. Flex-rigid double sided printed boards with through connections |
I.S. EN 175101-809:2004
|
DETAIL SPECIFICATION - TWO-PART CONNECTORS FOR PRINTED BOARDS HAVING A GRID OF 2.54 MM, SHORT VERSION IN COMPLIANCE WITH CECC 75101-801, WITH ASSESSED QUALITY |
IEC 60603-2:1995
|
Connectors for frequencies below 3 MHz for use with printed boards - Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features |
EN 60603-2:1998/A1:2005
|
CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS - PART 2: DETAIL SPECIFICATION FOR TWO-PART CONNECTORS WITH ASSESSED QUALITY, FOR PRINTED BOARDS, FOR BASIC GRID OF 2,54 MM (0,1 IN) WITH COMMON MOUNTING FEATURES |
EN 175101-802:1999
|
Detail specification: Two-part connectors for printed boards for high number of contacts with basic grid of 2,54 mm on 3 or 4 rows |
EN 123700:1996
|
Sectional Specification: Flex-rigid double sided printed board with through connections |
EN 60717:2012
|
Method for the determination of the space required by capacitors and resistors with unidirectional terminations |
EN 60431:1997/A2:1998
|
DIMENSIONS OF SQUARE CORES (RM-CORES) MADE OF MAGNETIC OXIDES AND ASSOCIATED PARTS |
NF EN 61188-5-1 : 2003
|
PRINTED BOARDS AND PRINTED BOARD ASSEMBLIES - DESIGN AND USE - PART 5-1: ATTACHMENT (LAND/JOINT) CONSIDERATIONS - GENERIC REQUIREMENTS |
EN 123800:1996
|
Sectional Specification: Flexible multilayer printed boards with through connections |