IEC 60502-2 REDLINE : 3ED 2014

Current

Current The latest, up-to-date edition.

POWER CABLES WITH EXTRUDED INSULATION AND THEIR ACCESSORIES FOR RATED VOLTAGES FROM 1 KV (U[M] = 1,2 KV) UP TO 30 KV (U[M] = 36 KV) - PART 2: CABLES FOR RATED VOLTAGES FROM 6 KV (U[M] = 7,2 KV) UP TO 30 KV (U[M] = 36 KV)

Available format(s):

Language(s):

Published date: 31-03-2014

Publisher: International Electrotechnical Committee

Table of Contents - (Show below) - (Hide below)

FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 Voltage designations and materials
5 Conductors
6 Insulation
7 Screening
8 Assembly of three-core cables, inner coverings
   and fillers
9 Metal layers for single-core and three-core cables
10 Metal screen
11 Concentric conductor
12 Metal sheath
13 Metal armour
14 Oversheath
15 Test conditions
16 Routine tests
17 Sample tests
18 Type tests, electrical
19 Type tests, non-electrical
20 Electrical tests after installation
Annex A (normative) - Fictitious calculation method
        for determination of dimensions of protective
        coverings
Annex B (informative) - Tabulated continuous current
        ratings for cables having extruded insulation
        and a rated voltage from 3,6/6 kV up to 18/30 kV
Annex C (normative) - Rounding of numbers
Annex D (normative) - Method of measuring resistivity of
        semi-conducting screens
Annex E (normative) - Determination of hardness of HEPR
        insulations
Annex F (normative) - Water penetration test
Annex G (informative) Determination of the cable conductor
        temperature
Bibliography

Abstract - (Show below) - (Hide below)

Describes the construction, dimensions and test requirements of power cables with extruded solid insulation from 6 kV up to 30 kV for fixed installations such as distribution networks or industrial installations.

General Product Information - (Show below) - (Hide below)

Committee	TC 20
Development Note	Stability date: 2017. (03/2014)
Document Type	Standard
ISBN
Pages
Published
Publisher	International Electrotechnical Committee
Status	Current

Standards Referencing This Book - (Show below) - (Hide below)

IEC 60811-501:2012	Electric and optical fibre cables - Test methods for non-metallic materials - Part 501: Mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds
IEC 60811-509:2012+AMD1:2017 CSV	Electric and optical fibre cables - Test methods for non-metallic materials - Part 509: Mechanical tests - Test for resistance of insulations and sheaths to cracking (heat shock test)
IEC 60038:2009	IEC standard voltages
IEC 60811-507:2012	Electric and optical fibre cables - Test methods for non-metallic materials - Part 507: Mechanical tests - Hot set test for cross-linked materials
IEC 60811-506:2012	Electric and optical fibre cables - Test methods for non-metallic materials - Part 506: Mechanical tests - Impact test at low temperature for insulations and sheaths
IEC 60228:2004	Conductors of insulated cables
IEC 60986:2000+AMD1:2008 CSV	Short-circuit temperature limits of electric cables with rated voltages from 6 kV (U_m = 7,2 kV) up to 30 kV (U_m = 36 kV)
IEC 60811-402:2012	Electric and optical fibre cables - Test methods for non-metallic materials - Part 402: Miscellaneous tests - Water absorption tests
IEC 60811-505:2012	Electric and optical fibre cables - Test methods for non-metallic materials - Part 505: Mechanical tests - Elongation at low temperature for insulations and sheaths
IEC 60811-503:2012	Electric and optical fibre cables - Test methods for non-metallic materials - Part 503: Mechanical tests - Shrinkage test for sheaths
IEC 60811-504:2012	Electric and optical fibre cables - Test methods for non-metallic materials - Part 504: Mechanical tests - Bending tests at low temperature for insulation and sheaths
IEC 60502-1:2004+AMD1:2009 CSV	Power cables with extruded insulation and their accessories for rated voltages from 1 kV (U_m = 1,2 kV) up to 30 kV(U_m = 36 kV) - Part 1: Cables for rated voltages of 1 kV (U_m = 1,2 kV) and 3 kV (U_m = 3,6 kV)
IEC 60885-3:2015 RLV	Electrical test methods for electric cables - Part 3: Test methods for partial discharge measurements on lengths of extruded power cables
IEC 60811-203:2012	Electric and optical fibre cables - Test methods for non-metallic materials - Part 203: General tests - Measurement of overall dimensions
IEC 60811-401:2012+AMD1:2017 CSV	Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven
IEC 60811-409:2012	Electric and optical fibre cables - Test methods for non-metallic materials - Part 409: Miscellaneous tests - Loss of mass test for thermoplastic insulations and sheaths
IEC 60811-202:2012+AMD1:2017 CSV	Electric and optical fibre cables - Test methods for non-metallic materials - Part 202: General tests - Measurement of thickness of non-metallic sheath
IEC 60332-1-2:2004+AMD1:2015 CSV	Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulatedwire or cable - Procedure for 1 kW pre-mixed flame
IEC 60230:1966	Impulse tests on cables and their accessories
IEC 60811-606:2012	Electric and optical fibre cables - Test methods for non-metallic materials - Part 606: Physical tests - Methods for determining the density
IEC 60183:2015	Guidance for the selection of high-voltage A.C. cable systems
IEC 60811-508:2012+AMD1:2017 CSV	Electric and optical fibre cables - Test methods for non-metallic materials - Part 508: Mechanical tests - Pressure test at high temperature for insulation and sheaths
IEC 60060-3:1976	High-voltage test techniques - Part 3: Measuring devices
IEC 60853-2:1989	Calculation of the cyclic and emergency current rating of cables. Part 2: Cyclic rating of cables greater than 18/30 (36) kV and emergency ratings for cables of all voltages
IEC 60287-3-1:2017	Electric cables - Calculation of the current rating - Part 3-1: Operating conditions - Site reference conditions
IEC 60811-405:2012	Electric and optical fibre cables - Test methods for non-metallic materials - Part 405: Miscellaneous tests - Thermal stability test for PVC insulations and PVC sheaths
IEC 60811-404:2012	Electric and optical fibre cables - Test methods for non-metallic materials - Part 404: Miscellaneous tests - Mineral oil immersion tests for sheaths
IEC 60229:2007	Electric cables - Tests on extruded oversheaths with a special protective function
IEC 60060-1:2010	High-voltage test techniques - Part 1: General definitions and test requirements
ISO 48:2010	Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD)
IEC 60811-201:2012+AMD1:2017 CSV	Electric and optical fibre cables - Test methods for non-metallic materials - Part 201: General tests - Measurement of insulation thickness
IEC 60811-605:2012	Electric and optical fibre cables - Test methods for non-metallic materials - Part 605: Physical tests - Measurement of carbon black and/or mineral filler in polyethylene compounds
IEC 60811-502:2012	Electric and optical fibre cables - Test methods for non-metallic materials - Part 502: Mechanical tests - Shrinkage test for insulations
IEC 60811-403:2012	Electric and optical fibre cables - Test methods for non-metallic materials - Part 403: Miscellaneous tests - Ozone resistance test on cross-linked compounds

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Sorry this product is not available in your region.

Add To Cart