02/206148 DC : 0
|
IEC 60603-7-5. ED. 1.0 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-5: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 250 MHZ (CAT 6, SHIELDED) |
BS EN 61076-7:2001
|
Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications Cable outlet accessories with assessed quality, including qualification and capability approval. Sectional specification |
BS EN 61076-4-102:1997
|
Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors Detail specification for two-part single-pole connectors, for multiple uses on plug-in units, with pre-centring, coding and early mating features, having a metric grid in accordance with IEC 60917 |
CEI EN 60512-11-9 : 2003
|
CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-9: CLIMATIC TESTS TEST 11I: DRY HEAT |
BS EN 60603-1:2000
|
Connectors for frequencies below 3 MHz for use with printed boards Generic specification. General requirements and guide for the preparation of detail specifications with assessed quality |
I.S. CECC 75301-802:1995
|
RECTANGULAR CONNECTORS FOR FREQUENCIES BELOW 3 MHZ, TRAPEZOIDAL SHAPED SHELLS AND ROUND CONTACTS 01 MM WITH CRIMP, SOLDER AND PRESS-IN TERMINANONS FOR PRINTED BOARDS |
I.S. EN 60512-11-10:2002
|
CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-10: CLIMATIC TESTS - TEST 11J: COLD |
00/201724 DC : DRAFT APR 2000
|
IEC 61076-1 - CONNECTORS - PRODUCT REQUIREMENTS - PART 1: GENERIC SPECIFICATION |
IEC PAS 60603-7-3:2004
|
Connectors for electronic equipment - Part 7-3: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz |
02/206147 DC : DRAFT AUG 2002
|
IEC 60603-7-4 ED.1.0 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-4: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 250 MHZ (CAT 6, UNSHIELDED) |
BS EN 61076-3-100:2000
|
Connectors for use in d.c., low-frequency analogue and digital high-speed data applications Rectangular connectors with assessed quality - Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removable ribbon contacts on a 1,27 mm double row |
BS QC010000(1993) : AMD 10432
|
HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS. CONNECTORS FOR FREQUENCIES BELOW 3 MHz FOR USE WITH PRINTED BOARDS - GENERIC SPECIFICATION: GENERAL REQUIREMENTS AND GUIDE FOR THE PREPARATION OF DETAIL SPECIFICATIONS, WITH ASSESSED QUALITY |
FD ISO/TR 12369 : 2001 FD
|
AGRICULTURAL TRACTORS AND MACHINERY - ELECTRICAL POWER TRANSMISSION CONNECTORS |
03/100395 DC : DRAFT APR 2003
|
EN 175101-809 - DETAIL SPECIFICATION - TWO-PART CONNECTORS FOR PRINTED BOARDS HAVING A GRID OF 2,54 MM, SHORT VERSION IN COMPLIANCE WITH CECC 75 101-801, WITH ASSESSED QUALITY |
02/202649 DC : DRAFT JAN 2002
|
IEC PAS 61076-3-111. ED.1 - CONNECTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 3-111: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED AND UNSHIELDED, FREE AND FIXED CONNECTORS, FOR INDUSTRIAL ENVIRONMENTS FOR FREQUENCIES UP TO 250 MHZ |
IEC 60131-1:1984
|
Lever switches. Part 1: General requirements and rules for the preparation of detail specifications |
UNE-EN 50467:2012
|
Railway applications - Rolling stock - Electrical connectors, requirements and test methods |
I.S. EN 50467:2011
|
RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
CEI 48-20 : 1998
|
RECTANGULAR CONNECTORS FOR FREQUENCIES BELOW 3 MHZ - PART 3: DETAIL SPECIFICATION FOR A RANGE OF CONNECTORS WITH TRAPEZOIDAL SHAPED METAL SHELLS AND ROUND CONTACTS - REMOVABLE CRIMP CONTACT TYPES WITH CLOSED CRIMP BARRELS, REAR INSERTION/REAR EXTRACTION |
I.S. EN 61076-4-103:1999
|
CONNECTORS FOR USE IN D.C. LOW-FREQUENCY ANALOGUE AND DIGITAL HIGH SPEED DATA APPLICATIONS - PART 4-103: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR TWO-PART CONNECTORS WITH SHIELDING AND A BASIC GRID OF 2.5 MM |
IEC 60603-14:1998
|
Connectors for frequencies below 3 MHz for use with printed boards - Part 14: Detail specification for circular connectors for low-frequency audio and video applications such as audio, video and audio-visual equipment |
EN 61076-5 : 2001
|
CONNECTORS FOR USE IN D.C., LOW-FREQUENCY ANALOGUE AND DIGITAL HIGH-SPEED DATA APPLICATIONS - PART 5: IN-LINE SOCKETS WITH ASSESSED QUALITY - SECTIONAL SPECIFICATION |
EN 196000 : 92 AMD 1 2001
|
HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS - GENERIC SPECIFICATION: ELECTROMECHANICAL SWITCHES |
EN 60603-12 : 1998
|
Connectors for frequencies below 3 MHz for use with printed boards - Part 12: Detail specification for dimensions, general requirements and tests for a range of sockets designed for use with integrated circuits |
EN 61076-4-105:1998
|
Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications - Part 4: Printed board connectors - Section 105: Detail specification for 9 mm circular connector with 3 to 8 contacts for use in a wide range of applications including the telecommunication and audio industry |
EN 60603-13:1998
|
Connectors for frequencies below 3 MHz for use with printed boards - Part 13: Detail specification for two-part connectors of assessed quality, for printed boards for basic grid of 2,54 mm (0,1 in), with free connectors for non-accessible insulation displacement terminations (ID) |
EN 61076-4-103:1999
|
Connectors for use in d.c. low-frequency analogue and digital high speed data applications - Part 4-103: Printed board connectors with assessed quality - Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm |
EN 61076-4-102:1997
|
Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Part 4: Printed board connectors - Section 102: Detail specification for two-part single-pole connectors, for multiple uses on plug-in units, with pre-centring, coding and early mating features, having a metric grid in accordance with IEC 60917 |
EN 61076-3-101:1997
|
Connectors with assessed quality, for use in d.c. low-frequency analogue and in digital high-speed data applications - Part 3: Rectangular connectors - Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells and non-removable rectangular contacts on a 1,27 mm x 2,54 mm centre-line |
EN 60966-1:1999
|
Radio frequency and coaxial cable assemblies - Part 1: Generic specification - General requirements and test methods |
EN 60512-11-10:2002
|
Connectors for electronic equipment - Tests and measurements - Part 11-10: Climatic tests - Test 11j: Cold |
EN 61076-7:2000
|
Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 7: Cable outlet accessories with assessed quality, including qualification and capability approval - Sectional specification |
EN 60512-11-9:2002
|
Connectors for electronic equipment - Tests and measurements - Part 11-9: Climatic tests - Test 11i: Dry heat |
EN 60130-17:1999
|
Connectors for frequencies below 3 MHz - Part 17: Detail specification for interconnection devices which permit multi-directional mating, for use with rechargeable batteries |
IEC 60807-9:1993
|
Rectangular connectors for frequencies below 3 MHz - Part 9: Detail specification for a range of peritelevision connectors |
BS EN 60130-17:1999
|
Connectors for frequencies below 3 MHz Detail specification for interconnection devices which permit multi-directional mating, for use with rechargeable batteries |
BS EN 61076-3-101 : 1998
|
CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C., LOW-FREQUENCY ANALOGUE AND IN DIGITAL HIGH-SPEED DATA APPLICATIONS - PART 3: RECTANGULAR CONNECTORS - SECTION 101: DETAIL SPECIFICATION FOR A RANGE OF SHIELDED CONNECTORS WITH TRAPEZOIDAL SHAPED SHELLS AND NON-REMOVABLE RECTANGULAR CONTACTS ON A 1,27 MM X 2,54 MM CENTRE-LINE |
BS EN 196403:2000
|
Harmonized systems of quality assessment for electronic components. Blank detail specification: push button switches. Assessment level Y |
I.S. EN 60603-14:2000
|
CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS - PART 14: DETAIL SPECIFICATION FOR CIRCULAR CONNECTORS FOR LOW-FREQUENCY AUDIO AND VIDEO APPLICATIONS SUCH AS AUDIO, VIDEO AND AUDIO-VISUAL EQUIPMENT |
BS EN 60512-11-10:2002
|
Connectors for electronic equipment. Tests and measurements. Climatic tests Test 11j. Cold |
BS EN 60352-6:1998
|
Solderless connections Solderless insulation piercing connections. General requirements, test methods and practical guidance |
BS EN 61076-4-103:1999
|
Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm - Cable to board connectors, shielded against EMC ,grid 2,5 mm,for high speed data rates,for use with printed boards |
CEI EN 50467 : 2013
|
RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
03/100167 DC : DRAFT JAN 2003
|
IEC 60603-3-105 ED.1 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 3-105: DETAIL SPECIFICATION FOR 4 PAIR BALANCED, INDIVIDUALLY SHIELDED, FIXED AND FREE CONNECTORS WITH CHARACTERISTIC IMPEDENCE OF 100 OHMS, COVERING A FREQUENCY RANGE FROM DC TO 1500 MHZ |
04/30112325 DC : DRAFT APR 2004
|
IEC 61076-3-104 ED.2 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 3-104: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR 8-WAY, SHIELDED FREE AND FIXED CONNECTORS FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 1000 MHZ |
BS EN 196000:1993
|
Harmonized system of quality assessment for electronic components. Generic specification. Electromechanical switches |
PREN 50467 : DRAFT 2009
|
RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
CEI EN 60352-3 : 1996
|
SOLDERLESS CONNECTIONS - PART 3: SOLDERLESS ACCESSIBLE INSULATION DISPLACEMENT CONNECTIONS GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE |
I.S. EN 60603-2:1998
|
CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS - PART 2: DETAIL SPECIFICATION FOR TWO-PART CONNECTORS WITH ASSESSED QUALITY, FOR PRINTED BOARDS, FOR BASIC GRID OF 2,54 MM (0,1 IN) WITH COMMON MOUNTING FEATURES |
I.S. 1128:1991
|
ELECTROMECHANICAL ALL-OR NOTHING RELAYS POLARIZED MONOSTABLE HERMETICALLY SEALED GENERAL PURPOSE RELAYS (DETAIL SPECIFICATION) |
CEI EN 60603-1 : 2001
|
CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS - PART 1: GENERIC SPECIFICATION; GENERAL REQUIREMENTS AND GUIDE FOR THE PREPARATION OF DETAIL SPECIFICATIONS, WITH ASSESSED QUALITY |
IEC PAS 61076-3-110:2002
|
Connectors for electronic equipment - Part 3-110: Detail specification for 8 way connectors for frequencies up to 600 MHz |
IEC 60130-17:1998
|
Connectors for frequencies below 3 MHz - Part 17: Detailspecification for interconnection devices which permit multi-directional mating, for use with rechargeable batteries |
IEC 61076-4-105:1995
|
Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications - Part 4: Printed board connectors - Section 105 : Detail specification for 9 mm circular connector with 3 to 8 contacts for use in a wide range of applications including the telecommunication . |
03/100442 DC : DRAFT MAY 2003
|
IEC 60352-2 ED.2 - SOLDERLESS CONNECTIONS - PART 2: SOLDERLESS CRIMPED CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE |
NF EN 61076 4 107 : 2002
|
CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-107: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR SHIELDED TWO-PART CONNECTORS HAVING A BASIC GRID OF 2,0 MM, FIXED PART WITH SOLDER AND PRESS-IN TERMINATIONS FOR PRINTED BOARDS, FREE PART WITH NON-ACCESSIBLE INSULATION DISPLACEMENT AND CRIMP TERMINATIONS |
03/100166 DC : DRAFT JAN 2003
|
IEC 60603-7-5 ED.1.0 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-5: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 250 MHZ |
EN 196110 : 2002
|
SECTIONAL SPECIFICATION - ROTARY SWITCHES - CAPABILITY APPROVAL |
BS EN 60603-2:1998
|
Connectors for frequencies below 3 MHz for use with printed boards Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features |
BS EN 196103:2000
|
Blank detail specification: Rotary switches. Assessment level Y |
DD CLC/TS 50467:2008
|
Railway applications. Rolling stock. Electrical connectors, requirements and test methods |
CECC 75301-802 : 1994
|
RECTANGULAR CONNECTORS FOR FREQUENCIES BELOW 3 MHZ, TRAPEZOIDAL SHAPED SHELLS AND ROUND CONTACTS 01 MM WITH CRIMP, SOLDER AND PRESS-IN TERMINANONS FOR PRINTED BOARDS |
BS EN 60352-4:1995
|
Solderless connections Solderless non-accessible insulation displacement connections. General requirements, test methods and practical guidance |
04/30124126 DC : DRAFT OCT 2004
|
IEC 61076-2-104 ED.1 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 2-104: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR M8 CONNECTORS WITH SCREW OR SNAP-LOCKING FOR LOW VOLTAGE APPLICATIONS |
CEI EN 60603-14 : 2000
|
CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS - PART 14: DETAIL SPECIFICATION FOR CIRCULAR CONNECTORS FOR LOW-FREQUENCY AUDIO AND VIDEO APPLICATIONS SUCH AS AUDIO, VIDEO AND AUDIO-VISUAL EQUIPMENT |
BS EN 60603-13:1998
|
Connectors for frequencies below 3 MHz for use with printed boards Detail specification for two-part connectors of assessed quality, for printed boards for basic grid of 2,54 mm (0,1 in) with free connectors for non-accessible insulation displacement terminations (ID) |
BS EN 60603-12:1998
|
Connectors for frequencies below 3 MHz for use with printed boards Detail specification for dimensions, general requirements and tests for a range of sockets designed for use with integrated circuits |
BS EN 61076-4-105:1998
|
Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors Detail specification for 9 mm circular connector with 3 to 8 contacts for use in a wide range of applications including the telecommunication and audio industry |
I.S. EN 61076-4-102:1998
|
CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C., LOW-FREQUENCY ANALOGUE AND IN DIGITAL HIGH SPEED DATA APPLICATIONS - PART 4: PRINTED BOARD CONNECTORS - SECTION 102: DETAIL SPECIFICATION FOR TWO-PART SINGLE-POLE CONNECTORS, FOR MULTIPLE USES ON PLUG-IN UNITS, WITH PRE-CENTRING, CODING AND EARLY MATING FEATURES, HAVING A METRIC GRID IN ACCORDANCE WITH IEC 60917 |
I.S. EN 60130-17:1999
|
CONNECTORS FOR FREQUENCIES BELOW 3 MHZ - PART 17: DETAIL SPECIFICATION FOR INTERCONNECTION DEVICES WHICH PERMIT MULTI-DIRECTIONAL MATING, FOR USE WITH RECHARGEABLE BATTERIES |
I.S. EN 60512-11-9:2002
|
CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-9: CLIMATIC TESTS - TEST 11I: DRY HEAT |
I.S. EN 61076-5:2002
|
CONNECTORS FOR USE IN D.C., LOW-FREQUENCY ANALOGUE AND DIGITAL HIGH-SPEED DATA APPLICATIONS - PART 5: IN-LINE SOCKETS WITH ASSESSED QUALITY - SECTIONAL SPECIFICATION |
IEC 60131-4:1987
|
Lever switches. Part 4: Requirements for miniature toggle switches |
CECC 75101-807 : 1994
|
MODULAR TWO-PART CONNECTORS FOR PRINTED BOARDS AND BACKPLANES, GRIDOF 2.5 mm - ACCORDING TO IEC 917 (DETAIL SPECIFICATION) |
NF EN 61076 3 101 : 1998
|
CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C. LOW-FREQUENCY ANALOGUE AND IN DIGITAL HIGH-SPEED DATA APPLICATIONS - PART 3: RECTANGULAR CONNECTORS - SECTION 101: DETAIL SPECIFICATION FOR A RANGE OF SHIELDED CONNECTORS WITH TRAPEZOIDAL SHAPED SHELLS AND NON-REMOVABLE RECTANGULAR CONTACTS ON A 1,27 MM X 2,54 MM CENTER-LINE |
IEC PAS 61076-3-109:2001
|
Connectors for electronic equipment - Part 3-109: Detail specification for two-part cable to board connector for high speed data application in a harsh industrial environment - Protection rate IP67 according to IEC 60529 |
IEC 61020-3-2:1995
|
Electromechanical switches for use in electronic equipment - Part3: Sectional specification for in-line package switches - Section2: Detail specification for dual-in-line package (DIP) switches,raised and recessed rocker actuated |
I.S. CECC 75101-807:1994
|
MODULAR TWO-PART CONNECTORS FOR PRINTED BOARDS AND BACKPLANES, GRID OF 2.5 MM - (ACCORDING TO IEC 917) (DETAIL SPECIFICATION) |
S.R. CLC/TS 50467:2008
|
RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
EN 175101-809:2004/corrigendum Jun. 2005
|
DETAIL SPECIFICATION: TWO-PART CONNECTORS FOR PRINTED BOARDS HAVING A GRID OF 2,54 MM, SHORT VERSION IN COMPLIANCE WITH CECC 75 101-801, WITH ASSESSED QUALITY |
NF EN 60352-4 : 2001
|
SOLDERLESS CONNECTIONS - PART 4: SOLDERLESS NON-ACCESSIBLE INSULATION DISPLACEMENT CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE |
EN 60352-3:1994
|
Solderless connections - Part 3: Solderless accessible insulation displacement connections - General requirements, test methods and practical guidance |
EN 60352-4:1994/A1:2000
|
SOLDERLESS CONNECTIONS - PART 4: SOLDERLESS NON-ACCESSIBLE INSULATION DISPLACEMENT CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE |
CEI EN 61076-4-103 : 2001
|
CONNECTORS FOR USE IN D.C. LOW - FREQUENCY ANALOGUE AND DIGITAL HIGH SPEED DATA APPLICATIONS PART 4-103: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY DETAIL SPECIFICATION FOR TWO-PART CONNECTORS WITH SHIELDING AND A BASIC GRID OF 2,5 MM |
CEI 48-19 : 1998
|
RECTANGULAR CONNECTORS FOR FREQUENCIES BELOW 3 MHZ - PART 2: DETAIL SPECIFICATION FOR A RANGE OF CONNECTORS, WITH ASSESSED QUALITY, WITH TRAPEZOIDAL SHAPED METAL SHELLS AND ROUND CONTACTS - FIXED SOLDER CONTACT TYPES |
NF EN 61076 4 102 : 1998
|
CONNECTORS WITH ASSESSED QUALITY FOR USE IN D.C., LOW-FREQUENCY ANALOGUE AND IN DIGITAL HIGH SPEED DATA APPLICATIONS - PART 4: PRINTED BOARD CONNECTORS - SECTION 102: DETAIL SPECIFICATION FOR TWO-PART SINGLE-POLE CONNECTORS, FOR MULTIPLE USES ON PLUG-IN UNITS, WITH PRE-CENTERING, CODING AND EARLY MATING FEATURES, HAVING A METRIC GRID IN ACCORDANCE WITH IEC 60917 |
BS EN 175201-804:2000
|
Harmonized system of quality assessment for electronic components Detail specification. Circular connectors. Round contacts, size diameter 1,6 mm, threaded coupling |
CEI EN 61076-3-101 : 1998
|
CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D/C/ LOW-FREQUENCY ANALOGUE AND IN DIGITAL HIGH-SPEED DATA APPLICATIONS - PART 3: RECTANGULAR CONNECTORS - SECTION 101: DETAIL SPECIFICATION FOR A RANGE OF SHIELDED CONNECTORS WITH TRAPEZOIDAL SHAPED SHELLS AND NON-REMOVABLE RECTANGULAR CONTACTS ON A 1,27 MM X 2,54 MM CENTRE-LINE |
ISO/IEC 14575:2000
|
Information technology Microprocessor systems Heterogeneous InterConnect (HIC) (Low-Cost, Low-Latency Scalable Serial Interconnect for Parallel System Construction) |
CEI EN 60130-17 : 2001
|
CONNECTORS FOR FREQUENCIES BELOW 3 MHZ - PART 17: DETAIL SPECIFICATION FOR INTERCONNECTION DEVICES WHICH PERMIT MULTI-DIRECTIONAL MATING, FOR USE WITH RECHARGEABLE BATTERIES |
CEI EN 60352-6 : 1998
|
SOLDERLESS CONNECTIONS - PART 6: INSULATION PIERCING CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE |
BS QC 480000(1995) : 1995
|
CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C. LOW FREQUENCY ANALOGUE AND IN DIGITAL HIGH SPEED DATA APPLICATIONS - PART 1: GENERIC SPECIFICATION |
ANSI INCITS 293 : 1996 : R2006
|
INFORMATION TECHNOLOGY - SERIAL STORAGE ARCHITECTURE PHYSICAL LAYER 1 (SSA-PH1) |
BS EN 175101-802:2000
|
Harmonized system of quality assessment for electronic components. Detail specification Two-part connectors for printed boards for high number of contacts with basic grid of 2,54 mm on 3 or 4 rows |
CEI EN 60966-1 : 2001
|
RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 1: GENERIC SPECIFICATION GENERAL REQUIREMENTS AND TEST METHODS |
CEI 48-15 : 1998
|
FLAT, QUICK-CONNECT TERMINATIONS |
11/30206085 DC : 0
|
BS EN 60947-7-4 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 7-4: ANCILLARY EQUIPMENT - PRINTED BOARD TERMINAL BLOCKS FOR COPPER CONDUCTORS |
BS EN 60603-14:1999
|
Connectors for frequencies below 3 MHz for use with printed boards Detail specification for circular connectors for low-frequency audio and video applications such as audio, video and audio-visual equipment |
NF EN 61076 4 105 : 1999
|
CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C., LOW FREQUENCY ANALOGUE AND IN DIGITAL HIGH-SPEED DATA APPLICATIONS - PART 4: PRINTED BOARD CONNECTORS - SECTION 105: DETAIL SPECIFICATION FOR 9 MM CIRCULAR CONNECTOR WITH 3 TO 8 CONTACTS FOR USE IN A WIDE RANGE OF APPLICATIONS INCLUDING THE TELECOMMUNICATION AND AUDIO INDUSTRY |
03/100336 DC : DRAFT MAR 2003
|
IEC 60603-7-7 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-7: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 600 MHZ |
03/100165 DC : DRAFT JAN 2003
|
IEC 60603-7-2 ED.1.0 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-2: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 100 MHZ |
ANSI INCITS 293 : 1996 : R2001
|
INFORMATION TECHNOLOGY - SERIAL STORAGE ARCHITECTURE PHYSICAL LAYER 1 (SSA-PH1) |
I.S. EN 196110:2002
|
SECTIONAL SPECIFICATION: ROTARY SWITCHES - CAPABILITY APPROVAL |
I.S. EN 61076-4-104:1999
|
CONNECTORS FOR USE IN D.C. LOW-FREQUENCY ANALOGUE AND DIGITAL HIGH-SPEED DATA APPLICATIONS - PART 4-104: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR TWO-PART MODULAR CONNECTORS, BASIC GRID OF 2.0 MM WITH TERMINATIONS ON A MULTIPLE GRID OF 0.5 MM |
IEC 60352-3:1993
|
Solderless connections - Part 3: Solderless accessible insulation displacement connections - General requirements, test methods and practical guidance |
IEC 61076-5:2001
|
Connectors for use in d.c., low-frequency analogue and digital high-speed data applications - Part 5: In-line sockets with assessed quality - Sectional specification |
IEC 60352-6:1997
|
Solderless connections - Part 6: Insulation piercing connections - General requirements, test methods and practical guidance |
IEC PAS 61076-3-111:2002
|
Connectors for electronic equipment - Part 3-111: Detail specification for 8-way, shielded and unshielded, free and fixed connectors, for industrial environments for frequencies up to 250 MHz |
IEC 61076-4-101:2001
|
Connectors for electronic equipment - Part 4-101: Printed board connectors with assessed quality - Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917 |
IEC 61076-3-101:1997
|
Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 3: Rectangular connectors - Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells and non-removable rectangular contacts on a 1,27 mm x 2,54 mm centre-line |
IEC 61076-4-100:2001
|
Connectors for electronic equipment - Part 4-100: Printed board connectors with assessed quality - Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes |
IEC 60512-11-10:2002
|
Connectors for electronic equipment - Tests and measurements - Part 11-10: Climatic tests - Test 11j: Cold |
IEC 60966-1:1999
|
Radio frequency and coaxial cable assemblies - Part 1: Generic specification - General requirements and test methods |
IEC 60603-12:1992
|
Connectors for frequencies below 3 MHz for use with printed boards - Part 12: Detail specification for dimensions, general requirements and tests for a range of sockets designed for use with integrated circuits |
IEC 61076-4-102:1997
|
Connectors with assessed quality for use in d.c., low-frequencyanalogue and in digital high speed data applications - Part 4:Printed board connectors - Section 102: Detail specification fortwo-part single-pole connectors, for multiple uses on plug-inunits, with pre-centring, coding and early mating features, havinga metric grid in accordance with IEC 60917 |
IEC 61076-3-100:1999
|
Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 3-100: Rectangular connectors with assessed quality - Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removable ribbon contacts on a 1,27 mm double row |
IEC 60603-13:1995
|
Connectors for frequencies below 3 MHz for use with printed boards - Part 13: Detail specification for two-part connectors of assessed quality, for printed boards for basic grid of 2,54 mm (0,1 in), with free connectors for non-accessible insulation displacement terminations (ID) |
IEC 60512-11-9:2002
|
Connectors for electronic equipment - Tests and measurements - Part 11-9: Climatic tests - Test 11i: Dry heat |
EN 175201-804:1999
|
Detail Specification: Circular connectors - Round contacts, size diameter 1,6 mm, threaded coupling |
CLC/TS 50467 : 2008 COR 2008
|
RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
01/207165 DC : DRAFT OCT 2001
|
IEC 61076-3-110 ED.1 - CONNECTORS FOR USE IN D.C., LOW FREQUENCY ANALOGUE AND IN DIGITAL HIGH SPEED APPLICATIONS - PART 3-110: DETAIL SPECIFICATION FOR 8 WAY CONNECTORS FOR FREQUENCIES UP TO 600 MHZ [CATEGORY 7 DETAIL SPECIFICATION] |
BS EN 61076-5:2001
|
Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications In-line sockets with assessed quality. Sectional specification |
CEI EN 60512-11-10 : 2003
|
CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-10: CLIMATIC TESTS - TEST 11J: COLD |
09/30208429 DC : 0
|
BS EN 50467 - RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
04/30124122 DC : DRAFT OCT 2004
|
IEC 61076-2-101 ED.2 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 2-101: CIRCULAR CONNECTORS. DETAIL SPECIFICATION FOR M12 CONNECTORS WITH SCREW-LOCKING FOR LOW VOLTAGE APPLICATIONS |
13/30291609 DC : 0
|
BS EN 60966-1 - RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND TEST METHODS |
CEI EN 61076-4-104 : 2001
|
CONNECTORS FOR USE IN D.C. LOW FREQUENCY ANALOGUE AND DIGITAL HIGH SPEED DATA APPLICATIONS PART 4-104: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY DETAIL SPECIFICATION FOR TWO-PART MODULAR CONNECTORS, BASIC GIRD OF 2,0 MMS WITH TERMINATIONS ON A MULTIPLE GIRD OF 0,5 MM |
BS EN 61076-4-107:2001
|
Connectors for electronic equipment Printed board connectors with assessed quality. Detail specification for shielded two-part connectors having a basic grid of 2,0 mm, fixed part with solder and press-in terminations for printed boards, free part with non-accessible insulation displacement and crimp terminations |
04/30112330 DC : 0
|
IEC 61076-3-113 ED.1 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 3-113: SCREENED, SERIAL MULTI-CONDUCTOR CABLE TO BOARD CONNECTORS SUITABLE FOR 10 GBIT/SEC DATA RATES |
CEI EN 61076-4-102 : 1998
|
CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C., LOW FREQUENCY ANALOGUE AND IN DIGITAL HIGH SPEED DATA APPLICATIONS - PART 4: PRINTED BOARD CONNECTORS SECTION 102: DETAIL SPECIFICATION FOR TWO-PART SINGLE-POLE CONNECTORS, FOR MULTIPLE USES ON PLUG-IN UNITS, WITH PRE-CENTRING, CODING AND EARLY MATING FEATURES, HAVING A METRIC GRID IN ACCORDANCE WITH IEC 60917 |
BS EN 50467:2011
|
Railway applications. Rolling stock. Electrical connectors, requirements and test methods |
BS EN 61076-4-104:1999
|
Connectors for electronic equipment. Printed board connectors with assessed quality Detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on a multiple grid of 0,5 mm - Detail specification for two part modular connectors (with optional shielding plates) for printed boards and backplanes, basic grid 2,0 mm, with terminations on a multiple grid of 0,5 mm |
BS EN 175101-809:2004
|
Harmonized system of quality assessment for electronic components. Detail specification Two-part connectors for printed boards having a grid of 2,54 mm, short version in compliance with CECC 75 101-801, with assessed quality |
BS EN 60512-11-9:2002
|
Connectors for electronic equipment. Tests and measurements. Climatic tests Test 11i. Dry heat |
01/206171 DC : DRAFT AUG 2001
|
|
IEC PAS 61076-3-104:2002
|
Connectors for electronic equipment - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors, for data transmissions with frequencies up to 600 MHz minimum |
DIN EN 60352-3:1995-05
|
Solderless connections - Part 3: Solderless accessible insulation displacement connections; general requirements, test methods and practical guidance (IEC 60352-3:1993); German version EN 60352-3:1994 |
CEI EN 61076-4-105 : 2001
|
CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C., LOW FREQUENCY ANALOGUE AND IN DIGITAL HIGH-SPEED DATA APPLICATIONS - PRINTED BOARD CONNECTORS - DETAIL SPECIFICATION FOR 9 MM CIRCULAR CONNECTOR WITH 3 TO 8 CONTACTS FOR USE IN A WIDE RANGE OF APPLICATIONS INCLUDING THE TELECOMMUNICATION= AND AUDIO INDUSTRY |
IEC 60807-1:1991
|
Rectangular connectors for frequencies below 3 MHz - Part 1:Generic specification - General requirements and guide for thepreparation of detail specifications for connectors with assessedquality |
I.S. EN 175101-809:2004
|
DETAIL SPECIFICATION - TWO-PART CONNECTORS FOR PRINTED BOARDS HAVING A GRID OF 2.54 MM, SHORT VERSION IN COMPLIANCE WITH CECC 75101-801, WITH ASSESSED QUALITY |
IEC 62847:2016
|
Railway applications - Rolling stock - Electrical connectors - Requirements and test methods |
IEC 60603-11:1992
|
Connectors for frequencies below 3 MHz for use with printed boards - Part 11: Detail specification for concentric connectors (dimensions for free connectors and fixed connectors) |
IEC 61076-4-104:1999
|
Connectors for use in d.c., low frequency analogue and digital high speed data applications - Part 4-104: Printed board connectors with assessed quality - Detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on a multiple grid of 0,5 mm |
IEC 60603-2:1995
|
Connectors for frequencies below 3 MHz for use with printed boards - Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features |
EN 60603-2:1998/A1:2005
|
CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS - PART 2: DETAIL SPECIFICATION FOR TWO-PART CONNECTORS WITH ASSESSED QUALITY, FOR PRINTED BOARDS, FOR BASIC GRID OF 2,54 MM (0,1 IN) WITH COMMON MOUNTING FEATURES |
EN 60352-6:1997
|
Solderless connections - Part 6: Insulation piercing connections - General requirements, test methods and practical guidance |
EN 175101-802:1999
|
Detail specification: Two-part connectors for printed boards for high number of contacts with basic grid of 2,54 mm on 3 or 4 rows |
EN 61076-4-107:2001
|
Connectors for electronic equipment - Part 4-107: Printed board connectors with assessed quality - Detail specification for shielded two-part connectors having a basic grid of 2,0 mm, fixed part with solder and press-in terminations for printed boards, free part with non-accessible insulation displacement and crimp terminations |
EN 61076-3-100:2000
|
Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 3-100: Rectangular connectors with assessed quality - Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removable ribbon contacts on a 1,27 mm double row |
EN 60603-1:1998
|
Connectors for frequencies below 3 MHz for use with printed boards - Part 1: Generic specification - General requirements and guide for the preparation of detail specifications, with assessed quality |
EN 50467 : 2011
|
RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
EN 61076-4-104:1999
|
Connectors for use in d.c. low-frequency analogue and digital high speed data applications - Part 4-104: Printed board connectors with assessed quality - Detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on a multiple grid of 0,5 mm |
EN 60603-14:1999
|
Connectors for frequencies below 3 MHz for use with printed boards - Part 14: Detail specification for circular connectors for low-frequency audio and video applications such as audio, video and audio-visual equipment |