CISPR 14-1:2016
|
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
IEC 60112:2003+AMD1:2009 CSV
|
Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
ISO 4400:1994
|
Fluid power systems and components — Three-pin electrical plug connectors with earth contact — Characteristics and requirements |
IEC 60038:2009
|
IEC standard voltages |
IEC 60738-1:2006+AMD1:2009 CSV
|
Thermistors - Directly heated positive temperature coefficient -Part 1: Generic specification |
ISO 7005-2:1988
|
Metallic flanges — Part 2: Cast iron flanges |
IEC 60127:1974
|
Cartridge fuse-links for miniature fuses |
IEC 60384-14:2013+AMD1:2016 CSV
|
Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains |
ISO 274:1975
|
Copper tubes of circular section — Dimensions |
IEC 61000-4-4 : 3.0EN+(REDLINE+VERSION)
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST |
IEC 60539:1976
|
Directly heated negative temperature coefficient thermistors |
IEC 61000-4-11:2004+AMD1:2017 CSV
|
Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests |
IEC 61000-4-4:2012 RLV
|
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
IEC 60695-2-11:2014
|
Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) |
IEC 60730-2-14:2017
|
Automatic electrical controls - Part 2-14: Particular requirements for electric actuators |
IEC 61000-4-6 : 4.0
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS |
IEC 61000-4-6:2013
|
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
CISPR 22:2008
|
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement |
IEC 60085:2007
|
Electrical insulation - Thermal evaluation and designation |
ISO 7-1:1994
|
Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation |
IEC 60998-2-2:2002
|
Connecting devices for low-voltage circuits for household and similar purposes - Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units |
IEC 60707:1999
|
Flammability of solid non-metallic materials when exposed to flame sources - List of test methods |
IEC 60738-1-1:2008
|
Thermistors - Directly heated positive step-function temperature coefficient - Part 1-1: Blank detail specification - Current limiting application - Assessment level EZ |
IEC 60099-1:1991+AMD1:1999 CSV
|
Surge arresters - Part 1: Non-linear resistor type gapped surge arresters for a.c. systems |
IEC 61000-4-2:2008
|
Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV
|
Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
IEC 60423:2007
|
Conduit systems for cable management - Outside diameters of conduits for electrical installations and threads for conduits and fittings |
IEC 61000-3-3:2013 RLV
|
Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection |
IEC 61000-3-3 : 3.0EN+(REDLINE+VERSION)
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-3: LIMITS - LIMITATION OF VOLTAGE CHANGES, VOLTAGE FLUCTUATIONS AND FLICKER IN PUBLIC LOW-VOLTAGE SUPPLY SYSTEMS, FOR EQUIPMENT WITH RATED CURRENT <= 16 A PER PHASE AND NOT SUBJECT TO CONDITIONAL CONNECTION |
IEC 60068-2-75:2014
|
Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests |
IEC 60664-3:2016
|
Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution |
ISO 7005-1:2011
|
Pipe flanges — Part 1: Steel flanges for industrial and general service piping systems |
ISO 301:2006
|
Zinc alloy ingots intended for castings |
ISO 6952:1994
|
Fluid power systems and components Two-pin electrical plug connectors with earth contact Characteristics and requirements |
IEC 60664-1:2007
|
Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
IEC 60216-1:2013
|
Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results |
ISO 228-1:2000
|
Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
IEC 61000-3-2 : 4.0
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-2: LIMITS - LIMITS FOR HARMONIC CURRENT EMISSIONS (EQUIPMENT INPUT CURRENT <= 16 A PER PHASE) |