|
CLC/TS 50430:2005
|
Optical fibre cables - Gas pipe cables - Family specification for cables to be installed in high pressure gas pipes |
|
NF EN 50290-2-21 : 2002 AMD 1 2008
|
COMMUNICATION CABLES - PART 2-21: COMMON DESIGN RULES AND CONSTRUCTION - PVC INSULATION COMPOUNDS |
|
CEI 18-49 : 2013
|
ELECTRICAL INSTALLATIONS IN SHIPS - PART 350: GENERAL CONSTRUCTION AND TEST METHODS OF POWER, CONTROL AND INSTRUMENTATION CABLES FOR SHIPBOARD AND OFFSHORE APPLICATIONS |
|
98/262057 DC : 0
|
IEC 60092-374 - ELECTRICAL INSTALLATIONS IN SHIPS - SHIPBOARD TELECOMMUNICATIONS CABLES AND RADIO-FREQUENCY CABLES - PART 374: TELEPHONE CABLES FOR NON-ESSENTIAL COMMUNICATION SERVICES |
|
I.S. EN 50288-7:0
|
MULTI-ELEMENT METALLIC CABLES USED IN ANALOGUE AND DIGITAL COMMUNICATION AND CONTROL - PART 7: SECTIONAL SPECIFICATION FOR INSTRUMENTATION AND CONTROL CABLES |
|
IEC 60227-3:1993+AMD1:1997 CSV
|
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 3: Non-sheathed cables for fixed wiring |
|
BS EN 50382-2 : 2008
|
RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK HIGH TEMPERATURE POWER CABLES HAVING SPECIAL FIRE PERFORMANCE - PART 2: SINGLE CORE SILICONE RUBBER INSULATED CABLES FOR 120 DEGREES C OR 150 DEGREES C |
|
BS EN 50288-7:2005
|
Multi-element metallic cables used in analogue and digital communication and control Sectional specification for instrumentation and control cables |
|
BS 6469-3.1(1992) : 1992
|
INSULATING AND SHEATHING MATERIALS OF ELECTRIC CABLES - METHODS OF TEST SPECIFIC TO PVC COMPOUNDS - PRESSURE TEST AT HIGH TEMPERATURE - TESTS FOR RESISTANCE TO CRACKING |
|
06/30148633 DC : DRAFT APR 2006
|
EN 60794-3-20 - OPTICAL FIBRE CABLES - PART 3-20: OUTDOOR CABLES - FAMILY SPECIFICATION FOR SELF-SUPPORTING AERIAL TELECOMMUNICATION CABLES |
|
09/30215019 DC : 0
|
BS EN 50551-1 - SIMPLEX AND DUPLEX CABLES TO BE USED FOR CORDS - PART 1: BLANK DETAIL SPECIFICATION AND MINIMUM REQUIREMENTS |
|
CEI EN 61138 : 2009
|
CABLES FOR PORTABLE EARTHING AND SHORT-CIRCUITING EQUIPMENT |
|
BS EN 50406-2:2004
|
End user multi-pair cables used in high bit rate telecommunication networks Duct and buried cables |
|
07/30172537 DC : 0
|
BS EN 60794-5-20 - OPTICAL FIBRE CABLES - PART 5-20: FAMILY SPECIFICATION FOR OUTDOOR MICRODUCT FIBRE UNITS, MICRODUCTS AND PROTECTED MICRODUCTS FOR INSTALLATION BY BLOWING |
|
UNE-EN 50525-3-11:2012
|
Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) - Part 3-11: Cables with special fire performance - Flexible cables with halogen-free thermoplastic insulation, and low emission of smoke |
|
CEI EN 50305 : 2003
|
RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK CABLES HAVING SPECIAL FIRE PERFORMANCE - TEST METHODS |
|
NF ISO 4141-1 : 2000
|
ROAD VEHICLES - MULTICORE CONNECTING CABLES - PART 1: TEST METHODS AND REQUIREMENTS FOR BASIC PERFORMANCE SHEATHED CABLES |
|
EN 50290-2-27 : 2002 COR 2010
|
COMMUNICATION CABLES - PART 2-27: COMMON DESIGN RULES AND CONSTRUCTION - HALOGEN FREE FLAME RETARDANT THERMOPLASTIC SHEATHING COMPOUNDS |
|
BS EN 60794-3-60:2008
|
Optical fibre cables Outdoor cables. Family specification for drinking water pipe cables and subducts for installation by blowing and/or pulling/dragging/floating in drinking water pipes |
|
CLC/TS 50429:2005
|
Optical fibre cables - Sewer cables - Family specification for cables to be installed in storm and sanitary sewers |
|
10/30215871 DC : 0
|
BS EN 50441-4 - CABLES FOR INDOOR RESIDENTIAL TELECOMMUNICATION INSTALLATIONS - PART 4: CABLES UP TO 1200 MHZ - GRADE 4 |
|
CEI CLC/TS 50430 : 2005
|
OPTICAL FIBRE CABLES - GAS PIPE CABLES - FAMILY SPECIFICATION FOR CABLES TO BE INSTALLED IN HIGH PRESSURE GAS PIPES |
|
CEI CLC/TS 50431 : 2005
|
OPTICAL FIBRE CABLES - DRINKING WATER PIPE CABLES - FAMILY SPECIFICATION FOR CABLES TO BE INSTALLED IN DRINKING WATER PIPES |
|
BS EN 50363-2-2:2005
|
Insulating, sheathing and covering materials for low voltage energy cables Cross-linked elastomeric covering compounds |
|
BS EN 60811-1-2:1995
|
Insulating and sheathing materials of electric cables. Common test methods. General application Thermal ageing methods |
|
BS EN 50441-3:2006
|
Cables for indoor residential telecommunication installations Screened cables. Grade 3 |
|
09/30201674 DC : 0
|
BS EN 60794-2-51 - OPTICAL FIBRE CABLES - PART 2-51: INDOOR OPTICAL FIBRE CABLES PRODUCT SPECIFICATION FOR SIMPLEX AND DUPLEX CABLES FOR USE IN PATCHCORDS FOR CONTROLLED ENVIRONMENT |
|
BS EN 50264-2-2:2008
|
Railway applications. Railway rolling stock power and control cables having special fire performance Cables with crosslinked elastomeric insulation. Multicore cables |
|
NF EN 61138 : 2008
|
CABLES FOR PORTABLE EARTHING AND SHORT-CIRCUITING EQUIPMENT |
|
CEI CLC/TS 50429 : 2005
|
OPTICAL FIBRE CABLES - SEWER CABLES - FAMILY SPECIFICATION FOR CABLES TO BE INSTALLED IN STORM AND SANITARY SEWERS |
|
BS 6469-1.2(1992) : 1992
|
INSULATING AND SHEATHING MATERIALS OF ELECTRIC CABLES - METHODS OF TEST FOR GENERAL APPLICATION - THERMAL AGEING METHODS |
|
05/30107058 DC : DRAFT JAN 2005
|
ISO 14572 - ROAD VEHICLES - ROUND, SCREENED AND UNSCREENED, 60 V AND 600 V MULTI-CORE SHEATHED CABLES - TEST METHODS AND REQUIREMENTS FOR BASIC AND HIGH PERFORMANCE CABLES |
|
10/30215867 DC : 0
|
BS EN 50441-2 - CABLES FOR INDOOR RESIDENTIAL TELECOMMUNICATION INSTALLATIONS - PART 2: SCREENED CABLES - GRADE 2 |
|
I.S. EN 50363-9-1:2005
|
INSULATING, SHEATHING AND COVERING MATERIALS FOR LOW VOLTAGE ENERGY CABLES - PART 9-1: MISCELLANEOUS INSULATING COMPOUNDS - CROSS-LINKED POLYVINYL CHLORIDE (XLPVC) |
|
BS 6469-3.2(1992) : 1992
|
INSULATING AND SHEATHING MATERIALS OF ELECTRIC CABLES - METHODS OF TEST SPECIFIC TO PVC COMPOUNDS - LOSS OF MASS TEST - THERMAL STABILITY TEST |
|
NF EN 60811 3-2 : 1996 AMD 2 2004
|
INSULATING AND SHEATHING MATERIALS OF ELECTRIC CABLES - COMMON TEST METHODS - PART 3: METHODS SPECIFIC TO PVC COMPOUNDS - SECTION 2: LOSS OF MASS TEST - THERMAL STABILITY TEST |
|
CEI EN 50407-1 : 2006
|
MULTI-PAIR CABLES USED IN HIGH BIT RATE DIGITAL ACCESS TELECOMMUNICATION NETWORKS - PART 1: OUTDOOR CABLES |
|
CEI EN 60811-202 : 2014
|
ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 202: GENERAL TESTS - MEASUREMENT OF THICKNESS OF NON-METALLIC SHEATH |
|
EN 60811-201:2012/A1:2017
|
ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 201: GENERAL TESTS - MEASUREMENT OF INSULATION THICKNESS (IEC 60811-201:2012/A1:2017) |
|
I.S. EN 50363-10-2:2005
|
INSULATING, SHEATHING AND COVERING MATERIALS FOR LOW VOLTAGE ENERGY CABLES - PART 10-2: MISCELLANEOUS SHEATHING COMPOUNDS - THERMOPLASTIC POLYURETHANE |
|
I.S. EN 50363-0:2011
|
INSULATING, SHEATHING AND COVERING MATERIALS FOR LOW-VOLTAGE ENERGY CABLES - PART 0: GENERAL INTRODUCTION |
|
BS EN 50290-2-21 : 2002
|
COMMUNICATION CABLES - PART 2-21: COMMON DESIGN RULES AND CONSTRUCTION - PVC INSULATION COMPOUNDS |
|
I.S. EN 50441-4:2012
|
CABLES FOR INDOOR RESIDENTIAL TELECOMMUNICATION INSTALLATIONS - PART 4: CABLES UP TO 1200 MHZ - GRADE 3 |
|
I.S. EN 50264-3-1:2008
|
RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK POWER AND CONTROL CABLES HAVING SPECIAL FIRE PERFORMANCE - PART 3-1: CABLES WITH CROSSLINKED ELASTOMERIC INSULATION WITH REDUCED DIMENSIONS - SINGLE CORE CABLES |
|
BS EN 50551-1:2011
|
Simplex and duplex cables to be used for cords Blank detail specification and minimum requirements |
|
IEC 60245-4:2011
|
Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 4: Cords and flexible cables |
|
NF EN 60794-2-10 : 2011
|
OPTICAL FIBRE CABLES - PART 2-10: INDOOR OPTICAL FIBRE CABLES - FAMILY SPECIFICATION FOR SIMPLEX AND DUPLEX CABLES |
|
I.S. EN 50264-2-1:2008
|
RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK POWER AND CONTROL CABLES HAVING SPECIAL FIRE PERFORMANCE - PART 2-1: CABLES WITH CROSSLINKED ELASTOMERIC INSULATION - SINGLE CORE CABLES |
|
I.S. EN 50363-7:2005
|
INSULATING, SHEATHING AND COVERING MATERIALS FOR LOW VOLTAGE ENERGY CABLES - PART 7: HALOGEN-FREE, THERMOPLASTIC INSULATING COMPOUNDS |
|
I.S. EN 50290-2-26:2002
|
COMMUNICATION CABLES - PART 2-26: COMMON DESIGN RULES AND CONSTRUCTION - HALOGEN FREE FLAME RETARDANT INSULATION COMPOUNDS |
|
CEI EN 50441-2 : 2013
|
CABLES FOR INDOOR RESIDENTIAL TELECOMMUNICATION INSTALLATIONS - PART 2: SCREENED CABLES - GRADE 1 |
|
NF EN 50551-1 : 2011
|
SIMPLEX AND DUPLEX CABLES TO BE USED FOR CORDS - PART 1: BLANK DETAIL SPECIFICATION AND MINIMUM REQUIREMENTS |
|
CEI EN 50525-3-11 : 2012
|
ELECTRIC CABLES - LOW VOLTAGE ENERGY CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V (U[0]/U) - PART 3-11: CABLES WITH SPECIAL FIRE PERFORMANCE - FLEXIBLE CABLES WITH HALOGEN-FREE THERMOPLASTIC INSULATION, AND LOW EMISSION OF SMOKE |
|
I.S. EN 50363-2-1:2005
|
INSULATING, SHEATHING AND COVERING MATERIALS FOR LOW VOLTAGE ENERGY CABLES - PART 2-1: CROSS-LINKED ELASTOMERIC SHEATHING COMPOUNDS |
|
I.S. CLC TS 50431:2005
|
OPTICAL FIBRE CABLES - DRINKING WATER PIPE CABLES - FAMILY SPECIFICATION FOR CABLES TO BE INSTALLED IN DRINKING WATER PIPES |
|
I.S. EN 50551-1:2011
|
SIMPLEX AND DUPLEX CABLES TO BE USED FOR CORDS - PART 1: BLANK DETAIL SPECIFICATION AND MINIMUM REQUIREMENTS |
|
IEC 60811-3-1:1985
|
Common test methods for insulating and sheathing materials ofelectric cables - Part 3: Methods specific to PVC compounds -Section One: Pressure test at high temperature - Tests forresistance to cracking |
|
UNE-ISO 4141-1:2016
|
Road vehicles. Multi-core connecting cables. Part 1: Test methods and requirements for basic performance sheathed cables |
|
IEC 60811-1-4:1985
|
Common test methods for insulating and sheathing materials of electric cables - Part 1: Methods for general application - Section Four: Tests at low temperature |
|
EN 60794-3-60:2008
|
Optical fibre cables - Part 3-60: Outdoor cables - Family specification for drinking water pipe cables and subducts for installation by blowing and/or pulling/dragging/floating in drinking water pipes |
|
EN 60811-3-1 : 95 AMD 2 2001
|
INSULATING AND SHEATHING MATERIALS OF ELECTRIC CABLES - COMMON TEST METHODS - METHODS SPECIFIC TO PVC COMPOUNDS - PRESSURE TEST AT HIGH TEMPERATURE - TESTS FOR RESISTANCE TO CRACKING |
|
EN 50363-2-1 : 2005 AMD 1 2011
|
INSULATING, SHEATHING AND COVERING MATERIALS FOR LOW VOLTAGE ENERGY CABLES - PART 2-1: CROSS-LINKED ELASTOMERIC SHEATHING COMPOUNDS |
|
IEC 62067:2011 RLV
|
Power cables with extruded insulation and their accessories for rated voltages above 150 kV (Um = 170 kV) up to 500 kV (Um = 550 kV) - Test methods and requirements |
|
EN 50363-8 : 2005 AMD 1 2011
|
INSULATING, SHEATHING AND COVERING MATERIALS FOR LOW VOLTAGE ENERGY CABLES - PART 8: HALOGEN-FREE, THERMOPLASTIC SHEATHING COMPOUNDS |
|
EN 50264-2-1:2008
|
Railway applications - Railway rolling stock power and control cables having special fire performance - Part 2-1: Cables with crosslinked elastomeric insulation - Single core cables |
|
EN 61138:2007
|
CABLES FOR PORTABLE EARTHING AND SHORT-CIRCUITING EQUIPMENT |
|
EN 50290-2-26 : 2002 AMD 1 2007
|
COMMUNICATION CABLES - PART 2-26: COMMON DESIGN RULES AND CONSTRUCTION - HALOGEN FREE FLAME RETARDANT INSULATION COMPOUNDS |
|
EN 50441-3:2006
|
Cables for indoor residential telecommunication installations - Part 3: Screened cables - Grade 3 |
|
EN 60794-3-50 : 2008
|
OPTICAL FIBRE CABLES - PART 3-50: OUTDOOR CABLES - FAMILY SPECIFICATION FOR GAS PIPE CABLES AND SUBDUCTS FOR INSTALLATION BY BLOWING AND/OR PULLING/DRAGGING IN GAS PIPES |
|
EN 50290-2-22 : 2001 AMD 1 2007
|
COMMUNICATION CABLES - PART 2-22: COMMON DESIGN RULES AND CONSTRUCTION - PVC SHEATHING COMPOUNDS |
|
EN 50363-10-1:2005
|
Insulating, sheathing and covering materials for low voltage energy cables - Part 10-1: Miscellaneous sheathing compounds - Cross-linked polyvinyl chloride (XLPVC) |
|
EN 60811-203:2012
|
Electric and optical fibre cables - Test methods for non-metallic materials - Part 203: General tests - Measurement of overall dimensions |
|
EN 50441-4:2012
|
Cables for indoor residential telecommunication installations - Part 4: Cables up to 1 200 MHz - Grade 3 |
|
EN 50525-3-11:2011
|
Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 3-11: Cables with special fire performance - Flexible cables with halogen-free thermoplastic insulation, and low emission of smoke |
|
EN 50441-1:2012
|
Cables for indoor residential telecommunication installations - Part 1: Unscreened cables - Grade 1 |
|
EN 50406-1:2004
|
End user multi-pair cables used in high bit rate telecommunication networks - Part 1: Aerial cables |
|
EN 60811-501:2012
|
Electric and optical fibre cables - Test methods for non-metallic materials - Part 501: Mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds |
|
EN 50363-9-1:2005
|
Insulating, sheathing and covering materials for low voltage energy cables - Part 9-1: Miscellaneous insulating compounds - Cross-linked polyvinyl chloride (XLPVC) |
|
EN 50382-1 : 2008 AMD 1 2013
|
RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK HIGH TEMPERATURE POWER CABLES HAVING SPECIAL FIRE PERFORMANCE - PART 1: GENERAL REQUIREMENTS |
|
EN 50264-1:2008
|
Railway applications - Railway rolling stock power and control cables having special fire performance - Part 1: General requirements |
|
EN 50363-6 : 2005 AMD 1 2011
|
INSULATING, SHEATHING AND COVERING MATERIALS FOR LOW VOLTAGE ENERGY CABLES - PART 6: HALOGEN-FREE, CROSS-LINKED SHEATHING COMPOUNDS |
|
EN 60811-1-2:1995/A2:2000
|
INSULATING AND SHEATHING MATERIALS OF ELECTRIC CABLES - COMMON TEST METHODS - GENERAL APPLICATION - THERMAL AGEING METHODS |
|
EN 60794-2-30:2008
|
Optical fibre cables - Part 2-30: Indoor cables - Family specification for ribbon cables |
|
EN 50264-3-2:2008
|
Railway applications - Railway rolling stock power and control cables having special fire performance - Part 3-2: Cables with crosslinked elastomeric insulation with reduced dimensions - Multicore cables |
|
EN 60794-2-10:2011
|
Optical fibre cables - Part 2-10: Indoor optical fibre cables - Family specification for simplex and duplex cables |
|
EN 50363-7:2005
|
Insulating, sheathing and covering materials for low voltage energy cables - Part 7: Halogen-free, thermoplastic insulating compounds |
|
BS EN 60811-501 : 2012
|
ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 501: MECHANICAL TESTS - TESTS FOR DETERMINING THE MECHANICAL PROPERTIES OF INSULATING AND SHEATHING COMPOUNDS |
|
11/30189460 DC : 0
|
BS IEC 62582-3 - NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - ELECTRICAL EQUIPMENT CONDITION MONITORING METHODS - PART 3: ELONGATION AT BREAK |
|
14/30299825 DC : 0
|
BS EN 50289-4-17 - COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 4-17: TEST METHODS FOR UV RESISTANCE EVALUATION OF THE SHEATH OF ELECTRICAL AND OPTICAL FIBRE CABLE |
|
BS EN 60811-3-2:1995
|
Insulating and sheathing materials of electric cables. Common test methods Methods specific to PVC compounds - Loss of mass test. Thermal stability test |
|
EN 60811-202:2012/A1:2017
|
ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 202: GENERAL TESTS - MEASUREMENT OF THICKNESS OF NON-METALLIC SHEATH (IEC 60811-202:2012/A1:2017) |
|
04/30126718 DC : DRAFT DEC 2004
|
IEC 60189-1 ED.3 - LOW-FREQUENCY CABLES AND WIRES WITH PVC INSULATION AND PVC SHEATH - PART 1: GENERAL TEST AND MEASURING METHODS |
|
BS EN 50441-4:2012
|
Cables for indoor residential telecommunication installations Cables up to 1 200 MHz. Grade 3 |
|
PREN 50288-1 : DRAFT 2011
|
MULTI-ELEMENT METALLIC CABLES USE IN ANALOGUE AND DIGITAL COMMUNICATION AND CONTROL - PART 1: GENERIC SPECIFICATION |
|
07/30163858 DC : 0
|
BS EN 60794-3-40 - OPTICAL FIBRE CABLES - PART 3-40: OUTDOOR OPTICAL FIBRE CABLES - FAMILY SPECIFICATION FOR SEWER CABLES AND CONDUITS FOR INSTALLATION BY BLOWING AND/OR PULLING IN NON-MAN ACCESSIBLE STORM AND SANITARY SEWERS |
|
ISO 14572:2011
|
Road vehicles — Round, sheathed, 60 V and 600 V screened and unscreened single- or multi-core cables — Test methods and requirements for basic- and high-performance cables |
|
UNE-EN 60811-203:2012
|
Electric and optical fibre cables - Test methods for non-metallic materials - Part 203: General tests - Measurement of overall dimensions |
|
UNE-EN 50264-3-2:2010
|
Railway applications - Railway rolling stock power and control cables having special fire performance -- Part 3-2: Cables with crosslinked elastomeric insulation with reduced dimensions - Multicore cables |
|
BS EN 60811-201:2012
|
Electric and optical fibre cables. Test methods for non-metallic materials General tests. Measurement of insulation thickness |
|
03/309905 DC : DRAFT JUNE 2003
|
IEC 60794-3-50 ED.1 - MICRO-CABLES, FIBRE UNITS AND MINI-TUBE SYSTEMS FOR INSTALLATION BY BLOWING TECHNIQUES |
|
BS EN 60811-203:2012
|
Electric and optical fibre cables. Test methods for non-metallic materials General tests. Measurement of overall dimensions |
|
05/30133180 DC : 0
|
EN 50382-1 - RAILWAY APPLICATIONS - HIGH TEMPERATURE POWER CABLES FOR RAILWAY ROLLING STOCK AND HAVING SPECIAL FIRE PERFORMANCE - PART 1: GENERAL REQUIREMENTS |
|
BS ISO 14572:2011
|
Road vehicles. Round, sheathed, 60 V and 600 V screened and unscreened single- or multi-core cables. Test methods and requirements for basic- and high-performance cables |
|
EN 50290-2-24 : 2002 AMD 1 2008
|
COMMUNICATION CABLES - PART 2-24: COMMON DESIGN RULES AND CONSTRUCTION - PE SHEATHING |
|
08/30159870 DC : DRAFT APR 2008
|
BS EN 60800 - HEATING CABLES WITH A RATED VOLTAGE OF 300/500 V FOR COMFORT HEATING AND PREVENTION OF ICE FORMATION |
|
BS EN 50363-0:2011
|
Insulating, sheathing and covering materials for low-voltage energy cables General introduction |
|
10/30196613 DC : 0
|
BS ISO 14572 - ROAD VEHICLES - ROUND, SHEATHED, 60 V AND 600 V SCREENED AND UNSCREENED SINGLE- OR MULTI-CORE CABLES - TEST METHODS AND REQUIREMENTS FOR BASIC AND HIGH-PERFORMANCE CABLES |
|
BS EN 50525-3-11:2011
|
Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) Cables with special fire performance. Flexible cables with halogen-free thermoplastic insulation, and low emission of smoke |
|
05/30128543 DC : DRAFT JAN 2005
|
IEC 60794-3-11 - OPTICAL FIBRE CABLES - PART 3-11: OUTDOOR CABLES - DUCT AND DIRECTLY BURIED OPTICAL TELECOMMUNICATION CABLES - DETAILED SPECIFICATION |
|
04/30117159 DC : DRAFT JUL 2004
|
EN 50441-2 - SCREENED CABLES FOR INDOOR RESIDENTIAL TELECOMMUNICATION INSTALLATIONS - PART 2: GRADE 2 |
|
CEI EN 50306-4 : 2003
|
RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK CABLES HAVING SPECIAL FIRE PERFORMANCE - THIN WALL - PART 4: MULTICORE AND MULTIPAIR CABLES STANDARD WALL SHEATHED |
|
03/301511 DC : DRAFT JAN 2003
|
ISO 4141-1 - ROAD VEHICLES - MULTICORE CONNECTING CABLES - PART 1: TEST METHODS AND REQUIREMENTS FOR BASIC PERFORMANCE SHEATHED CABLES |
|
BS EN 50406-1:2004
|
End user multi-pair cables used in high bit rate telecommunication networks Aerial cables |
|
07/30164159 DC : 0
|
BS EN 60794-2-30 - OPTICAL FIBRE CABLES - PART 2-30: INDOOR OPTICAL FIBRE CABLES - FAMILY SPECIFICATION FOR OPTICAL FIBRE RIBBON CABLES |
|
BS EN 187105:2002
|
Single mode optical cable (duct/direct buried installation) |
|
HD 605 S2:2008/corrigendum:2010
|
ELECTRIC CABLES - ADDITIONAL TEST METHODS |
|
NF EN 60794-3-11 : 2011
|
OPTICAL FIBRE CABLES - PART 3-11: OUTDOOR CABLES - PRODUCT SPECIFICATION FOR DUCT, DIRECTLY BURIED, AND LASHED AERIAL SINGLE-MODE OPTICAL FIBRE TELECOMMUNICATION CABLES |
|
07/30163866 DC : 0
|
BS EN 60794-3-60 - OPTICAL FIBRE CABLES -PART 3-60: OUTDOOR OPTICAL FIBRE CABLES - FAMILY SPECIFICATION FOR DRINKING WATER PIPE CABLES AND SUB-DUCTS FOR INSTALLATION BY BLOWING AND/OR PULLING/DRAGGING IN/FLOATING INTO DRINKING WATER PIPES |
|
NF EN 50306-4 : 2003
|
RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK CABLES HAVING SPECIAL FIRE PERFORMANCE - THIN WALL - PART 4: MULTICORE AND MULTIPAIR CABLES STANDARD WALL SHEATHED |
|
BS EN 50441-1:2012
|
Cables for indoor residential telecommunication installations Unscreened cables. Grade 1 |
|
BS EN 50264-2-1:2008
|
Railway applications. Railway rolling stock power and control cables having special fire performance Cables with crosslinked elastomeric insulation. Single core cables |
|
CEI EN 50441-3 : 2006
|
CABLES FOR INDOOR RESIDENTIAL TELECOMMUNICATION INSTALLATIONS - PART 3: SCREENED CABLES - GRADE 3 |
|
BS EN 60811-2-1:1998
|
Insulating and sheathing materials of electric cables. Common test methods. Methods specific to elastomeric compounds Methods specific to elastomeric compounds. Ozone resistance, hot set and mineral oil immersion tests |
|
BS EN 60794-2-10:2011
|
Optical fibre cables Indoor optical fibre cables. Family specification for simplex and duplex cables |
|
BS 6469-2.1(1992) : 1992
|
INSULATING AND SHEATHING MATERIALS OF ELECTRIC CABLES - METHODS OF TEST SPECIFIC TO ELASTOMERIC COMPOUNDS - OZONE RESISTANCE TEST - HOT SET TEST - MINERAL OIL IMMERSION TEST |
|
08/30188833 DC : 0
|
BS EN 50525-3-11 - ELECTRIC CABLES - LOW VOLTAGE ENERGY CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V - PART 3-11: CABLES WITH SPECIAL FIRE PERFORMANCE - FLEXIBLE CABLES WITH HALOGEN-FREE THERMOPLASTIC INSULATION, AND LOW EMISSION OF SMOKE |
|
CEI EN 60794-3-60 : 2010
|
OPTICAL FIBRE CABLES - PART 3-60: OUTDOOR CABLES - FAMILY SPECIFICATION FOR DRINKING WATER PIPE CABLES AND SUBDUCTS FOR INSTALLATION BY BLOWING AND/OR PULLING/DRAGGING/FLOATING IN DRINKING WATER PIPES |
|
NF EN 50396 : 2005 AMD 1 2012
|
NON ELECTRICAL TEST METHODS FOR LOW VOLTAGE ENERGY CABLES |
|
IEC 60227-4:1992+AMD1:1997 CSV
|
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 4: Sheathed cables for fixed wiring |
|
I.S. EN 61138:2008
|
CABLES FOR PORTABLE EARTHING AND SHORT-CIRCUITING EQUIPMENT |
|
PREN 50407-2 : DRAFT 2012
|
MULTI-PAIR CABLES USED IN HIGH BITE RATE DIGITAL ACCESS TELECOMMUNICATION NETWORKS - PART 2: INDOOR MULTI-PAIR/QUAD CABLES FOR INSTALLATION IN MULTI DWELLING UNITS SHAFT SUPPORTING UNIVERSAL SERVICES, XDSL AND APPLICATIONS UP TO 100 MBITS OVER IP |
|
CEI EN 60794-2-30 : 2010
|
OPTICAL FIBRE CABLES - PART 2-30: INDOOR CABLES - FAMILY SPECIFICATION FOR RIBBON CABLES |
|
CEI EN 60794-3-11 : 2012
|
OPTICAL FIBRE CABLES - PART 3-11: OUTDOOR CABLES - PRODUCT SPECIFICATION FOR DUCT, DIRECTLY BURIED AND LASHED AERIAL SINGLE-MODE OPTICAL FIBRE TELECOMMUNICATION CABLES |
|
PREN 50441-4 : DRAFT 2010
|
CABLES FOR INDOOR RESIDENTIAL TELECOMMUNICATION INSTALLATIONS - PART 4: CABLES UP TO 1200 MHZ - GRADE 4 |
|
I.S. EN 60794-2-30:2008
|
OPTICAL FIBRE CABLES - PART 2-30: INDOOR CABLES - FAMILY SPECIFICATION FOR RIBBON CABLES |
|
I.S. EN 62012-1:2002
|
MULTICORE AND SYMMETRICAL PAIR/QUAD CABLES FOR DIGITAL COMMUNICATIONS TO BE USED IN HARSH ENVIRONMENTS - PART 1: GENERIC SPECIFICATION |
|
I.S. EN 50363-10-1:2005
|
INSULATING, SHEATHING AND COVERING MATERIALS FOR LOW VOLTAGE ENERGY CABLES - PART 10-1: MISCELLANEOUS SHEATHING COMPOUNDS - CROSS-LINKED POLYVINYL CHLORIDE (XLPVC) |
|
I.S. EN 60811-203:2012
|
ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 203: GENERAL TESTS - MEASUREMENT OF OVERALL DIMENSIONS (IEC 60811-203:2012 (EQV)) |
|
I.S. EN 60794-3-11:2010
|
OPTICAL FIBRE CABLES - PART 3-11: OUTDOOR CABLES - PRODUCT SPECIFICATION FOR DUCT, DIRECTLY BURIED AND LASHED AERIAL SINGLE-MODE OPTICAL FIBRE TELECOMMUNICATION CABLES |
|
BS EN 50290-2-27:2002+A1:2007
|
Communication cables Common design rules and construction. Halogen free flame retardant thermoplastic sheathing compounds |
|
I.S. EN 50264-3-2:2008
|
RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK POWER AND CONTROL CABLES HAVING SPECIAL FIRE PERFORMANCE - PART 3-2: CABLES WITH CROSSLINKED ELASTOMERIC INSULATION WITH REDUCED DIMENSIONS - MULTICORE CABLES |
|
CEI EN 60708 : 2006
|
LOW-FREQUENCY CABLES WITH POLYOLEFIN INSULATION AND MOISTURE BARRIER POLYOLEFIN SHEATH |
|
UNE-EN 60794-2-30:2011
|
Optical fibre cables - Part 2-30: Indoor cables - Family specification for ribbon cables |
|
NF EN 50264-3-1 : 2008
|
RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK POWER AND CONTROL CABLES HAVING SPECIAL FIRE PERFORMANCE - PART 3-1: CABLES WITH CROSSLINKED ELASTOMERIC INSULATION WITH REDUCED DIMENSIONS - SINGLE CORE CABLES |
|
IEC 60800:2009
|
Heating cables with a rated voltage of 300/500 V for comfort heating and prevention of ice formation |
|
UNE-EN 60811-501:2012
|
Electric and optical fibre cables - Test methods for non-metallic materials - Part 501: Mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds |
|
CEI EN 50290-2-30 : 2002
|
COMMUNICATION CABLES - PART 2-30: COMMON DESIGN RULES AND CONSTRUCTION POLY(TETRAFLUOROETHYLENE-HEXAFLUOROPROPYLENE) (FEP) INSULATION AND SHEATHING |
|
NF EN 60794-1-1 : 2002
|
OPTICAL FIBER CABLES - PART 1-1: GENERIC SPECIFICATION - GENERAL |
|
DEFSTAN 02-526/2(2008) : 2008
|
REQUIREMENTS FOR CABLES ELECTRIC, ELASTOMERIC, LIMITED FIRE HAZARD SHEATHED FOR GENERAL SERVICES |
|
IEC 60840:2011 RLV
|
Power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um = 36 kV) up to 150 kV (Um = 170 kV) - Test methods and requirements |
|
I.S. EN 50363-5:2005
|
INSULATING, SHEATHING AND COVERING MATERIALS FOR LOW VOLTAGE ENERGY CABLES - PART 5: HALOGEN-FREE, CROSS-LINKED INSULATING COMPOUNDS |
|
IEC 60227-5:2011
|
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 5: Flexible cables (cords) |
|
EN 50306-1:2002
|
Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Part 1: General requirements |
|
VDE 0473-811-1-2 : 2001
|
INSULATING AND SHEATHING MATERIALS OF ELECTRIC CABLES - COMMON TEST METHODS - PART 1: GENERAL APPLICATION - SECTION 2: THERMAL AGEING METHODS |
|
PREN 50441-2 : DRAFT 2010
|
CABLES FOR INDOOR RESIDENTIAL TELECOMMUNICATION INSTALLATIONS - PART 2: SCREENED CABLES - GRADE 2 |
|
BS EN 60811-1-4:1995
|
Insulating and sheathing materials of electric cables. Common test methods. General application Tests at low temperature |
|
PREN 50525-3-11 : DRAFT 2008
|
ELECTRIC CABLES - LOW VOLTAGE ENERGY CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V - PART 3-11: CABLES WITH SPECIAL FIRE PERFORMANCE - FLEXIBLE CABLES WITH HALOGEN-FREE THERMOPLASTIC INSULATION, AND LOW EMISSION OF SMOKE |
|
BS EN 50290-2-22:2002
|
Communication cables Common design rules and construction. PVC sheathing compounds |
|
BS EN 50382-1 : 2008
|
RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK HIGH TEMPERATURE POWER CABLES HAVING SPECIAL FIRE PERFORMANCE - PART 1: GENERAL REQUIREMENTS |
|
BS ISO 4141-1:2005
|
Road vehicles. Multi-core connecting cables Test methods and requirements for basic performance sheathed cables |
|
I.S. EN 50363-4-1:2005
|
INSULATING, SHEATHING AND COVERING MATERIALS FOR LOW VOLTAGE ENERGY CABLES - PART 4-1: PVC SHEATHING COMPOUNDS |
|
BS EN 50290-2-24 : 2002
|
COMMUNICATION CABLES - PART 2-24: COMMON DESIGN RULES AND CONSTRUCTION - PE SHEATHING |
|
BS EN 50264-1:2008
|
Railway applications. Railway rolling stock power and control cables having special fire performance General requirements |
|
BS EN 60794-3-40:2008
|
Optical fibre cables Outdoor cables. Family specification for sewer cables and conduits for installation by blowing and/or pulling in non-man accessible storm and sanitary sewers |
|
CEI EN 60811-201 : 2014
|
ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 201: GENERAL TESTS - MEASUREMENT OF INSULATION THICKNESS |
|
10/30215863 DC : 0
|
BS EN 50441-1 - CABLES FOR INDOOR RESIDENTIAL TELECOMMUNICATION INSTALLATIONS - PART 1: UNSCREENED CABLES - GRADE 1 |
|
BS EN 60708:2005
|
Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath |
|
BS EN 50290-2-26:2002
|
Communication cables Common design rules and construction. Halogen free flame retardant insulation compounds |
|
BS EN 60811-3-1:1995
|
Insulating and sheathing materials of electric cables. Common test methods. Methods specific to PVC compounds Pressure test at high temperature. Tests for resistance to cracking |
|
CEI EN 60811-203 : 2014
|
ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 203: GENERAL TESTS - MEASUREMENT OF OVERALL DIMENSIONS |
|
CEI EN 50264-2-1 : 2009
|
RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK POWER AND CONTROL CABLES HAVING SPECIAL FIRE PERFORMANCE - PART 2-1: CABLES WITH CROSSLINKED ELASTOMERIC INSULATION - SINGLE CORE CABLES |
|
03/320275 DC : DRAFT DEC 2003
|
IEC 61196-6 ED.1 - COAXIAL COMMUNICATION CABLES - PART 6: SECTIONAL SPECIFICATION FOR CATV DROP CABLES |
|
CEI EN 50551-1 : 2012
|
SIMPLEX AND DUPLEX CABLES TO BE USED FOR CORDS - PART 1: BLANK DETAIL SPECIFICATION AND MINIMUM REQUIREMENTS |
|
BS EN 50264-3-2:2008
|
Railway applications. Railway rolling stock power and control cables having special fire performance Cables with crosslinked elastomeric insulation with reduced dimensions. Multicore cables |
|
02/205375 DC : DRAFT MAY 2002
|
IEC 60811-4-2. ED.2 - INSULATING AND SHEATHING MATERIALS OF ELECTRIC AND OPTICAL CABLES - COMMON TEST METHODS - PART 4-2: METHODS SPECIFIC TO POLYETHYLENE AND POLYPROPYLENE COMPOUNDS - TENSILE STRENGTH AND ELONGATION AT BREAK AFTER PRE-CONDITIONING - WRAPPING TEST AFTER THERMAL AGEING IN AIR - MEASUREMENT OF MASS INCREASE - LONG-TERM STABILITY TEST |
|
BS EN 60794-2-42:2008
|
Optical fibre cables Indoor optical fibre cables. Product specification for simplex and duplex cables with A4 fibres |
|
04/30117162 DC : DRAFT JUL 2004
|
EN 50441-3 - SCREENED CABLES FOR INDOOR RESIDENTIAL TELECOMMUNICATION INSTALLATIONS - PART 3: GRADE 3 |
|
CEI EN 50406-2 : 2006
|
END USER MULTI-PAIR CABLES USED IN HIGH BIT RATE TELECOMMUNICATION NETWORKS - PART 2: DUCT AND BURIED CABLES |
|
BS EN 50441-2:2012
|
Cables for indoor residential telecommunication installations Screened cables. Grade 1 |
|
NF EN 50306-3 : 2003
|
RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK CABLES HAVING SPECIAL FIRE PERFORMANCE - THIN WALL - PART 3: SINGLE CORE AND MULTICORE CABLES (PAIRS, TRIPLES AND QUADS) SCREENED AND THIN WALL SHEATHED |
|
BS EN 50305:2002
|
Railway applications. Railway rolling stock cables having special fire performance. Test methods |
|
NF EN 50117-1 : 2002 AMD 2 2013
|
COAXIAL CABLES - PART 1: GENERIC SPECIFICATION |
|
BS EN 60811-4-2:2004
|
Insulating and sheathing materials of electric and optical cables. Common test methods Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature. Wrapping test after conditioning at elevated temperature. Wrapping test after thermal ageing in air. Measurement of mass increase. Long-term stability test. Test method for copper-catalyzed oxidative degradation |
|
CEI EN 50264-2-2 : 2009
|
RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK POWER AND CONTROL CABLES HAVING SPECIAL FIRE PERFORMANCE - PART 2-2: CABLES WITH CROSSLINKED ELASTOMERIC INSULATION - MULTICORE CABLES |
|
05/30131385 DC : DRAFT MAR 2005
|
IEC 61156-1 ED 3 - MULTICORE AND SYMMETRICAL PAIR/QUAD CABLES FOR DIGITAL COMMUNICATIONS - PART 1: GENERIC SPECIFICATION |
|
BS 6469-1.4(1992) : 1992
|
INSULATING AND SHEATHING MATERIALS OF ELECTRIC CABLES - METHODS OF TEST FOR GENERAL APPLICATION - TESTS AT LOW TEMPERATURE |
|
04/30117156 DC : DRAFT JUL 2004
|
EN 50441-1 - UN-SCREENED CABLES FOR INDOOR RESIDENTIAL TELECOMMUNICATION INSTALLATIONS - PART 1: GRADE 1 |
|
UNE-EN 50264-2-1:2010
|
Railway applications - Railway rolling stock power and control cables having special fire performance -- Part 2-1: Cables with crosslinked elastomeric insulation - Single core cables |
|
I.S. EN 50441-2:2012
|
CABLES FOR INDOOR RESIDENTIAL TELECOMMUNICATION INSTALLATIONS - PART 2: SCREENED CABLES - GRADE 1 |
|
PREN 50289-4-17 : DRAFT 2014
|
COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 4-17: TEST METHODS FOR UV RESISTANCE EVALUATION OF THE SHEATH OF ELECTRICAL AND OPTICAL FIBRE CABLE |
|
I.S. EN 50441-3:2006
|
CABLES FOR INDOOR RESIDENTIAL TELECOMMUNICATION INSTALLATIONS - PART 3: SCREENED CABLES - GRADE 3 |
|
BS EN 50173-1:2011
|
Information technology. Generic cabling systems General requirements |
|
I.S. EN 50363-3:2005
|
INSULATING, SHEATHING AND COVERING MATERIALS FOR LOW VOLTAGE ENERGY CABLES - PART 3: PVC INSULATING COMPOUNDS |
|
IEC 60245-8:1998+AMD1:2003+AMD2:2011 CSV
|
Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 8: Cords for applications requiring high flexibility |
|
I.S. EN 60794-2-10:2011
|
OPTICAL FIBRE CABLES - PART 2-10: INDOOR OPTICAL FIBRE CABLES - FAMILY SPECIFICATION FOR SIMPLEX AND DUPLEX CABLES (IEC 60794-2-10:2011 (EQV)) |
|
CEI EN 60794-2-10 : 2012
|
OPTICAL FIBRE CABLES - PART 2-10: INDOOR OPTICAL FIBRE CABLES - FAMILY SPECIFICATION FOR SIMPLEX AND DUPLEX CABLES |
|
CEI EN 50264-3-2 : 2009
|
RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK POWER AND CONTROL CABLES HAVING SPECIAL FIRE PERFORMANCE - PART 3-2: CABLES WITH CROSSLINKED ELASTOMERIC INSULATION WITH REDUCED DIMENSIONS - MULTICORE CABLES |
|
CEI EN 50441-1 : 2013
|
CABLES FOR INDOOR RESIDENTIAL TELECOMMUNICATION INSTALLATIONS - PART 1: UNSCREENED CABLES - GRADE 1 |
|
EN 50173-1:2011
|
Information technology - Generic cabling systems - Part 1: General requirements |
|
PREN 50441-1 : DRAFT 2010
|
CABLES FOR INDOOR RESIDENTIAL TELECOMMUNICATION INSTALLATIONS - PART 1: UNSCREENED CABLES - GRADE 1 |
|
NF EN 50382-2 : 2008 AMD 1 2013
|
RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK HIGH TEMPERATURE POWER CABLES HAVING SPECIAL FIRE PERFORMANCE - PART 2: SINGLE CORE SILICONE RUBBER INSULATED CABLES FOR 120 DEGREES C OR 150 DEGREES C |
|
NF EN 50290-2-27 : 2002 AMD 1 2008
|
COMMUNICATION CABLES - PART 2-27: COMMON DESIGN RULES AND CONSTRUCTION - HALOGEN FREE FLAME RETARDANT THERMOPLASTIC SHEATHING COMPOUNDS |
|
IEC 60227-6:2001
|
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 6: Lift cables and cables for flexible connections |
|
I.S. EN 60794-3-40:2008
|
OPTICAL FIBRE CABLES - PART 3-40: OUTDOOR CABLES - FAMILY SPECIFICATION FOR SEWER CABLES AND CONDUITS FOR INSTALLATION BY BLOWING AND/OR PULLING IN NON-MAN ACCESSIBLE STORM AND SANITARY SEWERS |
|
ISO/IEC 11801:2002
|
Information technology Generic cabling for customer premises |
|
IEC 62255-1:2003
|
Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 1: Generic specification |
|
I.S. EN 50363-6:2005
|
INSULATING, SHEATHING AND COVERING MATERIALS FOR LOW VOLTAGE ENERGY CABLES - PART 6: HALOGEN-FREE, CROSS-LINKED SHEATHING COMPOUNDS |
|
IEC TS 62100:2004
|
Cables for aeronautical ground lighting primary circuits |
|
IEC 62067 : 2.0EN+(REDLINE+VERSION)
|
POWER CABLES WITH EXTRUDED INSULATION AND THEIR ACCESSORIES FOR RATED VOLTAGES ABOVE 150 KV (U[M] = 170 KV) UP TO 500 KV (U[M] = 550 KV) - TEST METHODS AND REQUIREMENTS |
|
IEC 60092-351:2004
|
Electrical installations in ships - Part 351: Insulating materials for shipboard and offshore units, power, control, instrumentation, telecommunication and data cables |
|
NF EN 50441-1 : 2006
|
CABLES FOR INDOOR RESIDENTIAL TELECOMMUNICATION INSTALLATIONS - PART 1: UN-SCREENED CABLES - GRADE 1 |
|
IEC 60794-2-10:2011
|
Optical fibre cables - Part 2-10: Indoor optical fibre cables - Family specification for simplex and duplex cables |
|
EN 60811-2-1 : 98 AMD 1 2001
|
INSULATING AND SHEATHING MATERIALS OF ELECTRIC CABLES - COMMON TEST METHODS - PART 2-1: METHODS SPECIFIC TO ELASTOMERIC COMPOUNDS - OZONE RESISTANCE, HOT SET AND MINERAL OIL IMMERSION TESTS |
|
UNE-EN 50264-1:2010
|
Railway applications - Railway rolling stock power and control cables having special fire performance -- Part 1: General requirements |
|
CEI EN 50306-3 : 2003
|
RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK CABLES HAVING SPECIAL FIRE PERFORMANCE - THIN WALL - PART 3: SINGLE CORE AND MULTICORE CABLES (PAIRS, TRIPLES AND QUADS) SCREENED AND THIN WALL SHEATHED |
|
I.S. EN 50441-1:2012
|
CABLES FOR INDOOR RESIDENTIAL TELECOMMUNICATION INSTALLATIONS - PART 1: UNSCREENED CABLES - GRADE 1 |
|
BS EN 60811-202:2012
|
Electric and optical fibre cables. Test methods for non-metallic materials General tests. Measurement of thickness of non-metallic sheath |
|
05/30128938 DC : DRAFT FEB 2005
|
IEC 61138 ED.3 - CABLES FOR PORTABLE EARTHING AND SHORT-CIRCUITING EQUIPMENT |
|
08/30178186 DC : DRAFT FEB 2008
|
BS EN 60794-5-10 - OPTICAL FIBRE CABLES - PART 5-10: FAMILY SPECIFICATION FOR OUTDOOR MICRODUCT OPTICAL FIBRE CABLES, MICRODUCTS AND PROTECTED MICRODUCTS FOR INSTALLATION BY BLOWING |
|
CEI EN 60794-2-42 : 2009
|
OPTICAL FIBRE CABLES - PART 2-42: INDOOR OPTICAL FIBRE CABLES - PRODUCT SPECIFICATION FOR SIMPLEX AND DUPLEX CABLES WITH A4 FIBRES |
|
BS EN 50363-1:2005
|
Insulating, sheathing and covering materials for low voltage energy cables Cross-linked elastomeric insulating compounds |
|
11/30255235 DC : 0
|
BS EN 50288-1 - MULTI-ELEMENT METALIC CABLES USED IN ANALOUGE AND DIGITAL COMUNICATION AND CONTROL - PART 1: GENEIC SPECIFICATION |
|
I.S. EN 60794-3-50:2008
|
OPTICAL FIBRE CABLES - PART 3-50: OUTDOOR CABLES - FAMILY SPECIFICATION FOR GAS PIPE CABLES AND SUBDUCTS FOR INSTALLATION BY BLOWING AND/OR PULLING/DRAGGING IN GAS PIPES |
|
I.S. EN 60811-501:2012
|
ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 501: MECHANICAL TESTS - TESTS FOR DETERMINING THE MECHANICAL PROPERTIES OF INSULATING AND SHEATHING COMPOUNDS (IEC 60811-501:2012 (EQV)) |
|
CEI EN 60794-3-40 : 2010
|
OPTICAL FIBRE CABLES - PART 3-40: OUTDOOR CABLES - FAMILY SPECIFICATION FOR SEWER CABLES AND CONDUITS FOR INSTALLATION BY BLOWING AND/OR PULLING IN NON-MAN ACCESSIBLE STORM AND SANITARY SEWERS |
|
BS EN 50306-1:2002
|
Railway applications. Railway rolling stock cables having special fire performance. Thin wall General requirements |
|
I.S. EN 60811-201:2012
|
ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 201: GENERAL TESTS - MEASUREMENT OF INSULATION THICKNESS |
|
00/201245 DC : DRAFT FEB 2000
|
IEC 62029-1 - COAXIAL CABLES USED IN CABLED DISTRIBUTION NETWORKS - PART 1: GENERIC SPECIFICATION AND TEST METHODS |
|
BS EN 50363-9-1:2005
|
Insulating, sheathing and covering materials for low-voltage energy cables Miscellaneous insulating compounds. Cross-linked polyvinyl chloride (XLPVC) |
|
UNE-EN 50264-3-1:2010
|
Railway applications - Railway rolling stock power and control cables having special fire performance -- Part 3-1: Cables with crosslinked elastomeric insulation with reduced dimensions - Single core cables |
|
BS EN 50525-2-21:2011
|
Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) Cables for general applications. Flexible cables with crosslinked elastomeric insulation |
|
PREN 50525-2-21 : DRAFT 2008
|
ELECTRIC CABLES - LOW VOLTAGE ENERGY CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V - PART 2-21: CABLES FOR GENERAL APPLICATIONS - FLEXIBLE CABLES WITH CROSSLINKED ELASTOMERIC INSULATION |
|
CEI EN 50525-2-21 : 2012
|
ELECTRIC CABLES - LOW VOLTAGE ENERGY CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V (U[0]/U) - PART 2-21: CABLES FOR GENERAL APPLICATIONS - FLEXIBLE CABLES WITH CROSSLINKED ELASTOMERIC INSULATION |
|
BS EN 50363-4-1:2005
|
Insulating, sheathing and covering materials for low voltage energy cables PVC sheathing compounds |
|
CEI EN 50306-1 : 2003
|
RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK CABLES HAVING SPECIAL FIRE PERFORMANCE - THIN WALL - PART 1: GENERAL REQUIREMENTS |
|
BS EN 60794-3-50:2008
|
Optical fibre cables Outdoor cables. Family specification for gas pipe cables and subducts for installation by blowing and/or pulling/dragging in gas pipes |
|
NF EN 50290-2-22 : 2002 AMD 1 2008
|
COMMUNICATION CABLES - PART 2-22: COMMON DESIGN RULES AND CONSTRUCTION - PVC SHEATHING COMPOUNDS |
|
BS EN 60794-3-11:2010
|
Optical fibre cables Outdoor cables. Product specification for duct, directly buried and lashed aerial single-mode optical fibre telecommunication cables |
|
BS EN 50264-3-1:2008
|
Railway applications. Railway rolling stock power and control cables having special fire performance Cables with crosslinked elastomeric insulation with reduced dimensions. Single core cables |
|
BS EN 50363-4-2:2005
|
Insulating, sheathing and covering materials for low voltage energy cables PVC covering compounds |
|
CEI EN 50264-3-1 : 2009
|
RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK POWER AND CONTROL CABLES HAVING SPECIAL FIRE PERFORMANCE - PART 3-1: CABLES WITH CROSSLINKED ELASTOMERIC INSULATION WITH REDUCED DIMENSIONS - SINGLE CORE CABLES |
|
BS EN 60794-2-30:2008
|
Optical fibre cables Indoor cables. Family specification for ribbon cables |
|
CEI EN 62012-1 : 2003
|
MULTICORE AND SYMMETRICAL PAIR/QUAD CABLES FOR DIGITAL COMMUNICATIONS TO BE USED IN HARSH ENVIRONMENT - PART 1: GENERIC SPECIFICATION |
|
05/30136249 DC : 0
|
EN 50264-1 - RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK POWER AND CONTROL CABLES HAVING SPECIAL FIRE PERFORMANCE - PART 1: GENERAL REQUIREMENTS |
|
BS EN 50306-4:2002
|
Railway applications. Railway rolling stock cables having special fire performance. Thin wall Multicore and multipair cables standard wall sheathed |
|
05/30133183 DC : 0
|
EN 50382-2 - RAILWAY APPLICATIONS - HIGH TEMPERATURE POWER CABLES FOR RAILWAY ROLLING STOCK AND HAVING SPECIAL FIRE PERFORMANCE - PART 2: SINGLE CORE SILICONE RUBBER INSULATED CABLES FOR 120 DEGREES C OR 150 DEGREE C |
|
16/30325971 DC : 0
|
BS ISO/IEC 11801-1 - INFORMATION TECHNOLOGY - GENERIC CABLING FOR CUSTOMER PREMISES - PART 1: GENERAL REQUIREMENTS |
|
CEI EN 50264-1 : 2009
|
RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK POWER AND CONTROL CABLES HAVING SPECIAL FIRE PERFORMANCE - PART 1: GENERAL REQUIREMENTS |
|
12/30260599 DC : 0
|
BS EN 50407-2 - MULTI-PAIR CABLES USED IN HIGH BITE RATE DIGITAL ACCESS TELECOMMUNICATION NETWORKS - PART 2: INDOOR MULTI-PAIR/QUAD CABLES FOR INSTALLATION IN MULTI DWELLING UNITS SHAFT SUPPORTING UNIVERSAL SERVICES, XDSL AND APPLICATIONS UP TO 100 MBITS OVER IP |
|
NF EN 50305 : 2002
|
RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK CABLES HAVING SPECIAL FIRE PERFORMANCE - TEST METHODS |
|
07/30148629 DC : 0
|
BS EN 60794-3-10 - OPTICAL FIBRE CABLES - PART 3-10: OUTDOOR CABLES - FAMILY SPECIFICATION FOR DUCT AND DIRECTLY BURIED OPTICAL TELECOMMUNICATION CABLES |
|
IEC 60227-7:1995+AMD1:2003+AMD2:2011 CSV
|
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 7: Flexible cables screened and unscreened with two or more conductors |
|
BS EN 50363-10-1:2005
|
Insulating, sheathing and covering materials for low-voltage energy cables Miscellaneous sheathing compounds. Cross-linked polyvinyl chloride (XLPVC) |
|
BS EN 50363-7:2005
|
Insulating, sheathing and covering materials for low voltage energy cables Halogen-free, thermoplastic insulating compounds |
|
NF EN 50290-2-26 : 2002 AMD 1 2008
|
COMMUNICATION CABLES - PART 2-26: COMMON DESIGN RULES AND CONSTRUCTION - HALOGEN FREE FLAME RETARDANT INSULATION COMPOUNDS |
|
IEC 60840 REDLINE : 4.0
|
POWER CABLES WITH EXTRUDED INSULATION AND THEIR ACCESSORIES FOR RATED VOLTAGES ABOVE 30 KV (U[M] = 36 KV) UP TO 150 KV (U[M] = 170 KV) - TEST METHODS AND REQUIREMENTS |
|
I.S. EN 50382-2:2008
|
RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK HIGH TEMPERATURE POWER CABLES HAVING SPECIAL FIRE PERFORMANCE - PART 2: SINGLE CORE SILICONE RUBBER INSULATED CABLES FOR 120 DEGREES C OR 150 DEGREES C |
|
I.S. EN 50525-3-11:2011
|
ELECTRIC CABLES - LOW VOLTAGE ENERGY CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V (U[0]/U) - PART 3-11: CABLES WITH SPECIAL FIRE PERFORMANCE - FLEXIBLE CABLES WITH HALOGEN-FREE THERMOPLASTIC INSULATION, AND LOW EMISSION OF SMOKE |
|
I.S. EN 50363-4-2:2005
|
INSULATING, SHEATHING AND COVERING MATERIALS FOR LOW VOLTAGE ENERGY CABLES - PART 4-2: PVC COVERING COMPOUNDS |
|
NF EN 50264-2-2 : 2008
|
RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK POWER AND CONTROL CABLES HAVING SPECIAL FIRE PERFORMANCE - PART 2-2: CABLES WITH CROSSLINKED ELASTOMERIC INSULATION - MULTICORE CABLES |
|
I.S. EN 50363-1:2005
|
INSULATING, SHEATHING AND COVERING MATERIALS FOR LOW VOLTAGE ENERGY CABLES - PART 1: CROSS-LINKED ELASTOMERIC INSULATING COMPOUNDS |
|
I.S. EN 60708:2005
|
LOW-FREQUENCY CABLES WITH POLYOLEFIN INSULATION AND MOISTURE BARRIER POLYOLEFIN SHEATH |
|
I.S. EN 50363-2-2:2005
|
INSULATING, SHEATHING AND COVERING MATERIALS FOR LOW VOLTAGE ENERGY CABLES - PART 2-2: CROSS-LINKED ELASTOMERIC COVERING COMPOUNDS |
|
I.S. EN 50382-1:2008
|
RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK HIGH TEMPERATURE POWER CABLES HAVING SPECIAL FIRE PERFORMANCE - PART 1: GENERAL REQUIREMENTS |
|
IEC 60189-1:2007
|
Low-frequency cables and wires with PVC insulation and PVC sheath - Part 1: General test and measuring methods |
|
I.S. EN 60811-202:2012
|
ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 202: GENERAL TESTS - MEASUREMENT OF THICKNESS OF NON-METALLIC SHEATH |
|
CLC/TS 50431:2005
|
Optical fibre cables - Drinking water pipe cables - Family specification for cables to be installed in drinking water pipes |
|
I.S. EN 50290-2-21:2001
|
COMMUNICATION CABLES - PART 2-21: COMMON DESIGN RULES AND CONSTRUCTION - PVC INSULATION COMPOUNDS |
|
CEI EN 50441-4 : 2013
|
CABLES FOR INDOOR RESIDENTIAL TELECOMMUNICATION INSTALLATIONS - PART 4: CABLES UP TO 1200 MHZ - GRADE 3 |
|
CEI EN 60794-3-50 : 2010
|
OPTICAL FIBRE CABLES - PART 3-50: OUTDOOR CABLES - FAMILY SPECIFICATION FOR GAS PIPE CABLES AND SUBDUCTS FOR INSTALLATION BY BLOWING AND/OR PULLING/DRAGGING IN GAS PIPES |
|
IEC 60227-1:2007
|
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements |
|
IEC 61138:2007
|
Cables for portable earthing and short-circuiting equipment |
|
IEC 60245-5:1994
|
Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 5: Lift cables |
|
IEC 60245-2:1994+AMD1:1997+AMD2:1997 CSV
|
Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 2: Test methods |
|
I.S. EN 50264-1:2008
|
RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK POWER AND CONTROL CABLES HAVING SPECIAL FIRE PERFORMANCE - PART 1: GENERAL REQUIREMENTS |
|
I.S. EN 50290-2-24:2002
|
COMMUNICATION CABLES - PART 2-24: COMMON DESIGN RULES AND CONSTRUCTION - PE SHEATHING |
|
IEC 60141-1:1993
|
Tests on oil-filled and gas-pressure cables and their accessories - Part 1: Oil-filled, paper or polypropylene paper laminate insulated, metal-sheathed cables and accessories for alternating voltages up to and including 500 kV |
|
IEC 60811-203:2012
|
Electric and optical fibre cables - Test methods for non-metallic materials - Part 203: General tests - Measurement of overall dimensions |
|
IEC 60811-501:2012
|
Electric and optical fibre cables - Test methods for non-metallic materials - Part 501: Mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds |
|
IEC 60794-3-60:2008
|
Optical fibre cables - Part 3-60: Outdoor cables - Family specification for drinking water pipe cables and subducts for installation by blowing and/or pulling/dragging/floating in drinking water pipes |
|
IEC 62012-1:2002
|
Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments - Part 1: Generic specification |
|
IEC 60794-3-40:2008
|
Optical fibre cables - Part 3-40: Outdoor cables - Family specification for sewer cables and conduits for installation by blowing and/or pulling in non-man accessible storm and sanitary sewers |
|
IEC 60811-201:2012+AMD1:2017 CSV
|
Electric and optical fibre cables - Test methods for non-metallic materials - Part 201: General tests - Measurement of insulation thickness |
|
UNE-EN 60811-201:2012
|
Electric and optical fibre cables - Test methods for non-metallic materials - Part 201: General tests - Measurement of insulation thickness |
|
IEC 60811-202:2012+AMD1:2017 CSV
|
Electric and optical fibre cables - Test methods for non-metallic materials - Part 202: General tests - Measurement of thickness of non-metallic sheath |
|
IEC 60708:2005
|
Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath |
|
EN 50305:2002
|
Railway applications - Railway rolling stock cables having special fire performance - Test methods |
|
IEC 60794-2-42:2008
|
Optical fibre cables - Part 2-42: Indoor optical fibre cables - Product specification for simplex and duplex cables with A4 fibres |
|
EN 50306-3:2002
|
Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Part 3: Single core and multicore cables (pairs, triples and quads) screened and thin wall sheathed |
|
IEC 60794-3-50:2008
|
Optical fibre cables - Part 3-50: Outdoor cables - Family specification for gas pipe cables and subducts for installation by blowing and/or pulling/dragging in gas pipes |
|
UNE-EN 60811-202:2012
|
Electric and optical fibre cables - Test methods for non-metallic materials - Part 202: General tests - Measurement of thickness of non-metallic sheath |
|
IEC 60811-2-1:1998+AMD1:2001 CSV
|
Common test methods for insulating and sheathing materials of electric and optical cables - Part 2-1: Methods specific to elastomeric compounds - Ozone resistance, hot set and mineral oil immersion tests |
|
EN 50306-4:2002
|
Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Part 4: Multicore and multipair cables standard wall sheathed |
|
EN 50363-3 : 2005 AMD 1 2011
|
INSULATING, SHEATHING AND COVERING MATERIALS FOR LOW VOLTAGE ENERGY CABLES - PART 3: PVC INSULATING COMPOUNDS |
|
EN 50363-1:2005
|
Insulating, sheathing and covering materials for low voltage energy cables - Part 1: Cross-linked elastomeric insulating compounds |
|
EN 60811-1-4:1995/A2:2001
|
INSULATING AND SHEATHING MATERIALS OF ELECTRIC CABLES - COMMON TEST METHODS - PART 1-4: GENERAL APPLICATION - TESTS AT LOW TEMPERATURE |
|
EN 50441-2:2012
|
Cables for indoor residential telecommunication installations - Part 2: Screened cables - Grade 1 |
|
BS EN 50363-10-2:2005
|
Insulating, sheathing and covering materials for low-voltage energy cables Miscellaneous sheathing compounds. Thermoplastic polyurethane |
|
04/30114758 DC : 0
|
IEC 60092-350 ED.3 - ELECTRICAL INSTALLATION IN SHIP - PART 350: SHIPBOARD POWER CABLES - GENERAL CONSTRUCTION AND TEST REQUIREMENTS |
|
BIS IS/IEC 60794-1-1 : 2001
|
OPTICAL FIBRE CABLES - PART 1: GENERIC SPECIFICATION - SECTION 1: GENERAL |
|
03/316192 DC : DRAFT SEP 2003
|
IEC 60708-1 ED 2 - LOW-FREQUENCY CABLES WITH POLYOLEFIN INSULATION AND MOISTURE BARRIER POLYOLEFIN SHEATH - PART 1: GENERAL DESIGN DETAILS AND REQUIREMENTS |
|
I.S. EN 50173-1:2011
|
INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 1: GENERAL REQUIREMENTS |
|
08/30188783 DC : 0
|
BS EN 50525-2-21 - ELECTRIC CABLES - LOW VOLTAGE ENERGY CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V - PART 2-21: CABLES FOR GENERAL APPLICATIONS - FLEXIBLE CABLES WITH CROSSLINKED ELASTOMERIC INSULATION |
|
BS IEC/IEEE 62582-3:2012
|
Nuclear power plants. Instrumentation and control important to safety. Electrical equipment condition monitoring methods Elongation at break |
|
ISO 4141-1:2005
|
Road vehicles Multi-core connecting cables Part 1: Test methods and requirements for basic performance sheathed cables |
|
03/308375 DC : DRAFT JUNE 2003
|
IEC 61196-1 - COAXIAL COMMUNICATION CABLES - PART 1: GENERIC SPECIFICATION - GENERAL, DEFINITIONS AND REQUIREMENTS |
|
I.S. EN 60794-2-42:2008
|
OPTICAL FIBRE CABLES - PART 2-42: INDOOR OPTICAL FIBRE CABLES - PRODUCT SPECIFICATION FOR SIMPLEX AND DUPLEX CABLES WITH A4 FIBRES |
|
BS EN 50290-2-30:2002
|
Communication cables. Common design rules and construction Poly(tetrafluoroethylene-hexafluoropropylene) (FEP) insulation and sheathing |
|
I.S. EN 60811-4-2:2004
|
INSULATING AND SHEATHING MATERIALS OF ELECTRIC AND OPTICAL CABLES - COMMON TEST METHODS - PART 4-2: METHODS SPECIFIC TO POLYETHYLENE AND POLYPROPYLENE COMPOUNDS - TENSILE STRENGTH AND ELONGATION AT BREAK AFTER CONDITIONING AT ELEVATED TEMPERATURE - WRAPPING TEST AFTER CONDITIONING AT ELEVATED TEMPERATURE - WRAPPING TEST AFTER THERMAL AGEING IN AIR - MEASUREMENT OF MASS INCREASE |
|
05/30136253 DC : 0
|
EN 50264-2-1 - RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK POWER AND CONTROL CABLES HAVING SPECIAL FIRE PERFORMANCE - PART 2-1: CABLES WITH CROSSLINKED ELASTOMERIC INSULATION - SINGLE CORE CABLES |
|
09/30197559 DC : 0
|
BS EN 60794-3-11 ED.2 - OPTICAL FIBRE CABLES - PART 3-11: OUTDOOR CABLES - PRODUCT SPECIFICATION FOR DUCT AND DIRECTLY BURIED SINGLE-MODE OPTICAL FIBRE TELECOMMUNICATION CABLES |
|
03/321547 DC : DRAFT DEC 2003
|
IEC 60216-2 ED.4 - ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 2: GUIDE FOR THE DETERMINATION OF THERMAL ENDURANCE PROPERTIES OF ELECTRICAL INSULATING MATERIALS - CHOICE OF TEST CRITERIA |
|
07/30163862 DC : 0
|
BS EN 60794-3-50 - OPTICAL FIBRE CABLES - PART 3-50: OUTDOOR OPTICAL FIBRE CABLES - FAMILY SPECIFICATION FOR GAS PIPE CABLES AND SUB-DUCTS FOR INSTALLATION BY BLOWING AND/OR PULLING/DRAGGING IN/INTO GAS PIPES |
|
I.S. HD 605:2008
|
ELECTRIC CABLES - ADDITIONAL TEST METHODS |
|
I.S. CLC TS 50430:2005
|
OPTICAL FIBRE CABLES - GAS PIPE CABLES - FAMILY SPECIFICATION FOR CABLES TO BE INSTALLED IN HIGH PRESSURE GAS PIPES |
|
03/318201 DC : DRAFT NOV 2003
|
IEC 60502-2, ED.2 - POWER CABLES WITH EXTRUDED INSULATION AND THEIR ACCESSORIES FOR RATED VOLTAGES FROM 1 KV (UM = 1,2 KV) UP TO 30 KV (UM = 36 KV) - PART 2: CABLES FOR RATED VOLTAGES FROM 6 KV (UM = 7,2 KV) UP TO 30 KV (UM = 36 KV) |
|
NF EN 50290-2-24 : 2002 AMD 1 2009
|
COMMUNICATION CABLES - PART 2-24: COMMON DESIGN RULES AND CONSTRUCTION - PE SHEATHING |
|
BS EN 50407-1:2004
|
Multi-pair cables used in high bit rate digital access telecommunication networks Outdoor cables |
|
BS EN 62012-1:2002
|
Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments Generic specification |
|
BS EN 50306-3:2002
|
Railway applications. Railway rolling stock cables having special fire performance. Thin wall Single core and multicore cables (pairs, triples and quads) screened and thin wall sheathed |
|
CEI EN 50173-1 : 2011
|
INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 1: GENERAL REQUIREMENTS |
|
NF EN 50382-1 : 2008 AMD 1 2013
|
RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK HIGH TEMPERATURE POWER CABLES HAVING SPECIAL FIRE PERFORMANCE - PART 1: GENERAL REQUIREMENTS |
|
UNE-EN 50264-2-2:2010
|
Railway applications - Railway rolling stock power and control cables having special fire performance -- Part 2-2: Cables with crosslinked elastomeric insulation - Multicore cables |
|
NF EN 50264-3-2 : 2008
|
RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK POWER AND CONTROL CABLES HAVING SPECIAL FIRE PERFORMANCE - PART 3-2: CABLES WITH CROSSLINKED ELASTOMERIC INSULATION WITH REDUCED DIMENSIONS - MULTICORE CABLES |
|
BS EN 61138:1998
|
Cables for portable earthing and short-circuiting equipment |
|
UNE-EN 50525-2-21:2012
|
Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) -- Part 2-21: Cables for general applications - Flexible cables with crosslinked elastomeric insulation |
|
I.S. EN 50264-2-2:2008
|
RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK POWER AND CONTROL CABLES HAVING SPECIAL FIRE PERFORMANCE - PART 2-2: CABLES WITH CROSSLINKED ELASTOMERIC INSULATION - MULTICORE CABLES |
|
I.S. EN 50363-8:2005
|
INSULATING, SHEATHING AND COVERING MATERIALS FOR LOW VOLTAGE ENERGY CABLES - PART 8: HALOGEN-FREE, THERMOPLASTIC SHEATHING COMPOUNDS |
|
I.S. EN 50290-2-27:2002
|
COMMUNICATION CABLES - PART 2-27: COMMON DESIGN RULES AND CONSTRUCTION - HALOGEN FREE FLAME RETARDANT THERMOPLASTIC SHEATHING COMPOUNDS |
|
NF EN 50306-1 : 2003
|
RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK CABLES HAVING SPECIAL FIRE PERFORMANCE - THIN WALL - PART 1: GENERAL REQUIREMENTS |
|
NF EN 50264-2-1 : 2008
|
RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK POWER AND CONTROL CABLES HAVING SPECIAL FIRE PERFORMANCE - PART 2-1: CABLES WITH CROSSLINKED ELASTOMERIC INSULATION - SINGLE CORE CABLES |
|
UNE-EN 50363-0:2011
|
Insulating, sheathing and covering materials for low-voltage energy cables -- Part 0: General introduction |
|
IEC 61196-1:2005
|
Coaxial communication cables - Part 1: Generic specification - General, definitions and requirements |
|
IEC 60502-1:2004+AMD1:2009 CSV
|
Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV(Um = 36 kV) - Part 1: Cables for rated voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV) |
|
I.S. EN 50290-2-30:2002
|
COMMUNICATION CABLES - PART 2-30: COMMON DESIGN RULES AND CONSTRUCTION - POLY(TETRAFLUOROETHYLENE-HEXAFLUOROPROPYLENE) (FEP) INSULATION AND SHEATHING |
|
I.S. EN 50525-2-21:2011
|
ELECTRIC CABLES - LOW VOLTAGE ENERGY CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V (U[0]/U) - PART 2-21: CABLES FOR GENERAL APPLICATIONS - FLEXIBLE CABLES WITH CROSSLINKED ELASTOMERIC INSULATION |
|
I.S. CLC TS 50429:2005
|
OPTICAL FIBRE CABLES - SEWER CABLES - FAMILY SPECIFICATION FOR CABLES TO BE INSTALLED IN STORM AND SANITARY SEWERS |
|
IEC 61156-1:2007+AMD1:2009 CSV
|
Multicore and symmetrical pair/quad cables for digital communications - Part 1: Generic specification |
|
I.S. EN 60811-3-2:1997
|
INSULATING AND SHEATHING MATERIALS OF ELECTRIC CABLES - COMMON TEST METHODS - PART 3-2: METHODS SPECIFIC TO PVC COMPOUNDS - LOSS OF MASS TEST - THERMAL STABILITY TEST |
|
IEC 60794-2-30:2008
|
Optical fibre cables - Part 2-30: Indoor cables - Family specification for ribbon cables |
|
IEC 60245-1:2003+AMD1:2007 CSV
|
Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 1: General requirements |
|
I.S. EN 60794-3-60:2008
|
OPTICAL FIBRE CABLES - PART 3-60: OUTDOOR CABLES - FAMILY SPECIFICATION FOR DRINKING WATER PIPE CABLES AND SUBDUCTS FOR INSTALLATION BY BLOWING AND/OR PULLING/DRAGGING/FLOATING IN DRINKING WATER PIPES |
|
IEC 60794-3-11:2010
|
Optical fibre cables - Part 3-11: Outdoor cables - Product specification for duct, directly buried, and lashed aerial single-mode optical fibre telecommunication cables |
|
EN 50407-1:2004
|
Multi-pair cables used in high bit rate digital access telecommunication networks - Part 1: Outdoor cables |
|
EN 50363-4-2:2005
|
Insulating, sheathing and covering materials for low voltage energy cables - Part 4-2: PVC covering compounds |
|
EN 50363-2-2:2005
|
Insulating, sheathing and covering materials for low voltage energy cables - Part 2-2: Cross-linked elastomeric covering compounds |
|
EN 60794-3-40:2008
|
Optical fibre cables - Part 3-40: Outdoor cables - Family specification for sewer cables and conduits for installation by blowing and/or pulling in non-man accessible storm and sanitary sewers |
|
EN 50363-10-2 : 2005
|
Insulating, sheathing and covering materials for low voltage energy cables - Part 10-2: Miscellaneous sheathing compounds - Thermoplastic polyurethane |
|
EN 50363-0:2011
|
Insulating, sheathing and covering materials for low-voltage energy cables - Part 0: General introduction |
|
EN 50290-2-30:2002
|
Communication cables - Part 2-30: Common design rules and construction - Poly(tetrafluoroethylene-hexafluoropropylene) (FEP) insulation and sheathing |
|
EN 50551-1:2011
|
Simplex and duplex cables to be used for cords - Part 1: Blank Detail Specification and minimum requirements |
|
EN 60794-3-11:2010
|
Optical fibre cables - Part 3-11: Outdoor cables - Product specification for duct, directly buried and lashed aerial single-mode optical fibre telecommunication cables |
|
EN 187105:2002
|
Single mode optical cable (duct/direct buried installation) |
|
EN 50264-2-2:2008
|
Railway applications - Railway rolling stock power and control cables having special fire performance - Part 2-2: Cables with crosslinked elastomeric insulation - Multicore cables |
|
EN 50264-3-1:2008
|
Railway applications - Railway rolling stock power and control cables having special fire performance - Part 3-1: Cables with crosslinked elastomeric insulation with reduced dimensions - Single core cables |
|
EN 62012-1:2002
|
Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments - Part 1: Generic specification |
|
EN 50382-2:2008/A1:2013
|
RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK HIGH TEMPERATURE POWER CABLES HAVING SPECIAL FIRE PERFORMANCE - PART 2: SINGLE CORE SILICONE RUBBER INSULATED CABLES FOR 120 DEGREES C OR 150 DEGREES C |
|
EN 60794-2-42:2008
|
Optical fibre cables - Part 2-42: Indoor optical fibre cables - Product specification for simplex and duplex cables with A4 fibres |
|
EN 50363-5 : 2005 AMD 1 2011
|
INSULATING, SHEATHING AND COVERING MATERIALS FOR LOW VOLTAGE ENERGY CABLES - PART 5: HALOGEN-FREE, CROSS-LINKED INSULATING COMPOUNDS |
|
EN 60708:2005/AC:2016-08
|
LOW-FREQUENCY CABLES WITH POLYOLEFIN INSULATION AND MOISTURE BARRIER POLYOLEFIN SHEATH |
|
EN 50363-4-1:2005
|
Insulating, sheathing and covering materials for low voltage energy cables - Part 4-1: PVC sheathing compounds |
|
EN 50288-7:2005
|
Multi-element metallic cables used in analogue and digital communication and control - Part 7: Sectional specification for instrumentation and control cables |
|
EN 50406-2:2004
|
End user multi-pair cables used in high bit rate telecommunication networks - Part 2: Duct and buried cables |
|
EN 60811-4-2:2004
|
Insulating and sheathing materials of electric and optical cables - Common test methods - Part 4-2: Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature - Wrapping test after conditioning at elevated temperature - Wrapping test after thermal ageing in air - Measurement of mass increase - Long-term stability test - Test method for copper-catalyzed oxidative degradation |
|
EN 60811-3-2 : 95 AMD 2 2004
|
INSULATING AND SHEATHING MATERIALS OF ELECTRIC AND OPTICAL CABLES - COMMON TEST METHODS - PART 3-2: METHODS SPECIFIC TO PVC COMPOUNDS - LOSS OF MASS TEST - THERMAL STABILITY TEST |
|
EN 50290-2-21:2001/A1:2007/AC:2016
|
COMMUNICATION CABLES - PART 2-21: COMMON DESIGN RULES AND CONSTRUCTION - PVC INSULATING COMPOUNDS |
|
EN 50525-2-21:2011/AC:2013
|
ELECTRIC CABLES - LOW VOLTAGE ENERGY CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V (U[0]/U) - PART 2-21: CABLES FOR GENERAL APPLICATIONS - FLEXIBLE CABLES WITH CROSSLINKED ELASTOMERIC INSULATION |