• IEC 61193-2:2007

    Current The latest, up-to-date edition.

    Quality assessment systems - Part 2: Selection and use of sampling plans for inspection of electronic components and packages

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s):  English

    Published date:  30-08-2007

    Publisher:  International Electrotechnical Committee

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    FOREWORD
    INTRODUCTION
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 Sampling system
      4.1 Formation and identification of lots
      4.2 Drawing of samples
          4.2.1 Selection of sample items
          4.2.2 Process of sampling
      4.3 Sampling plans
          4.3.1 Inspection level
          4.3.2 Sampling plan for normal inspection
          4.3.3 Acceptance number
          4.3.4 Tightened or reduced inspection
    5 Acceptance and rejection
      5.1 Acceptability criteria
      5.2 Disposition of rejected lots
    6 Statistical verified quality limit (SVQL)
      6.1 General
      6.2 Calculation of the SVQL
    Annex A (informative) Estimation of the statistical verified
            quality limit (SVQL) in nonconforming items per million
            (x10[-6]) at a confidence limit 60%
    Annex B (informative) Relationship between this standard
            and ISO 2859-1
    Annex C (informative) Example of application of this standard
            (lot-by-lot inspection of assessment level EZ in
            IEC/TC 40)
    Bibliography

    Abstract - (Show below) - (Hide below)

    Applies to the inspection of electronic components, packages, and also modules (referred to as "products in this standard) for use in electronic and electric equipment. It specifies sampling plans for inspection by attributes on the assumption that the acceptance number is zero (Ac = 0), including criteria for sample selection and procedures.

    General Product Information - (Show below) - (Hide below)

    Committee TC 91
    Development Note Stability Date: 2020. (11/2017)
    Document Type Standard
    Publisher International Electrotechnical Committee
    Status Current

    Standards Referenced By This Book - (Show below) - (Hide below)

    10/30237992 DC : DRAFT NOV 2010 BS IEC 60393-6 - POTENTIOMETERS FOR USE IN ELECTRONIC EQUIPMENT - PART 6: SECTIONAL SPECIFICATION - SURFACE MOUNT PRESET POTENTIOMETERS
    13/30284041 DC : 0 BS EN 60384-19 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 19: SECTIONAL SPECIFICATION: FIXED METALLIZED POLYETHYLENE-TEREPHTHALATE FILM DIELECTRIC SURFACE MOUNT D.C. CAPACITORS
    BS EN 140100 : 2008 SECTIONAL SPECIFICATION: FIXED LOW POWER FILM RESISTORS
    NF EN 60115-8 : 2013 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT RESISTORS
    13/30287806 DC : 0 BS EN 60539-1 - DIRECTLY HEATED NEGATIVE TEMPERATURE COEFFICIENT THERMISTORS - PART 1: GENERIC SPECIFICATION
    BS EN 60115-2:2015 Fixed resistors for use in electronic equipment Sectional specification: Leaded fixed low power film resistors
    13/30284045 DC : 0 BS EN 60384-23 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 23: SECTIONAL SPECIFICATION: FIXED SURFACE MOUNT METALLIZED POLYETHYLENE NAPHTHALATE FILM DIELECTRIC D.C. CAPACITORS
    08/30181401 DC : DRAFT APR 2008 BS IEC 60747-14-1 - SEMICONDUCTOR DEVICES - PART 14-1: SEMICONDUCTOR SENSORS - GENERIC SPECIFICATION FOR SENSORS
    09/30214333 DC : 0 BS EN 60384-22 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 22: SECTIONAL SPECIFICATION: FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC, CLASS 2
    NF EN 60384-4 : 2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 4: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH SOLID (MNO[2]) AND NON-SOLID ELECTROLYTE
    NF EN 60393-5 : 2016 POTENTIOMETERS FOR USE IN ELECTRONIC EQUIPMENT - PART 5: SECTIONAL SPECIFICATION - SINGLE-TURN ROTARY LOW-POWER WIREWOUND AND NONWIREWOUND POTENTIOMETERS
    13/30289543 DC : 0 BS EN 60384-4 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 4: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH SOLID (MNO2) AND NON-SOLID ELECTROLYTE
    BS EN 60384-22:2012 (published 2012-04) Fixed capacitors for use in electronic equipment Sectional specification. Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2
    BS EN 60393-6 : 2016 POTENTIOMETERS FOR USE IN ELECTRONIC EQUIPMENT - PART 6: SECTIONAL SPECIFICATION - SURFACE MOUNT PRESET POTENTIOMETERS
    CEI EN 60384-9 : 2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 9: SECTIONAL SPECIFICATION: FIXED CAPACITORS OF CERAMIC DIELECTRIC, CLASS 2
    CEI EN 60115-8-1 : 2016 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8-1: BLANK DETAIL SPECIFICATION: FIXED SURFACE MOUNT (SMD) LOW POWER FILM RESISTORS FOR GENERAL ELECTRONIC EQUIPMENT, CLASSIFICATION LEVEL G
    BS EN 60384-14-2 : 2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 14-2: BLANK DETAIL SPECIFICATION - FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION AND CONNECTION TO THE SUPPLY MAINS - SAFETY TESTS ONLY
    I.S. EN 60384-19:2015 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 19: SECTIONAL SPECIFICATION: FIXED METALLIZED POLYETHYLENE-TEREPHTHALATE FILM DIELECTRIC SURFACE MOUNT D.C. CAPACITORS
    BS EN 60393-5 : 2016 POTENTIOMETERS FOR USE IN ELECTRONIC EQUIPMENT - PART 5: SECTIONAL SPECIFICATION - SINGLE-TURN ROTARY LOW-POWER WIREWOUND AND NONWIREWOUND POTENTIOMETERS
    CEI EN 62047-4 : 2011 SEMICONDUCTOR DEVICES - MICRO-ELECTROMECHANICAL DEVICES - PART 4: GENERIC SPECIFICATION FOR MEMS
    CEI EN 60068-2-82 : 2008 ENVIRONMENTAL TESTING - PART 2-82: TESTS - TEST TX: WHISKER TEST METHODS FOR ELECTRONIC AND ELECTRIC COMPONENTS
    CEI EN 60115-2 : 2016 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION: LEADED FIXED LOW POWER FILM RESISTORS
    CEI EN 140401 : 2009 BLANK DETAIL SPECIFICATION: FIXED LOW POWER FILM SURFACE MOUNT (SMD) RESISTORS
    17/30349734 DC : 0 BS EN 60384-26 ED.2.0 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 26: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE
    10/30237986 DC : 0 BS EN 140401-804 - DETAIL SPECIFICATION: FIXED LOW POWER FILM HIGH STABILITY SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 0,1; 0,25
    12/30260691 DC : 0 BS EN 60384-24 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 24: SECTIONAL SPECIFICATION - SURFACE MOUNT FIXED TANTALUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE
    BS EN 60384-14-1 : 2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 14-1: BLANK DETAIL SPECIFICATION - FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION AND CONNECTION TO THE SUPPLY MAINS - ASSESSMENT LEVEL DZ
    10/30237989 DC : DRAFT NOV 2010 BS IEC 60393-5 - POTENTIOMETERS FOR USE IN ELECTRONIC EQUIPMENT - PART 5: SECTIONAL SPECIFICATION - SINGLE-TURN ROTARY LOW-POWER WIRE WOUND AND NON-WIRE WOUND POTENTIOMETERS
    14/30280850 DC : 0 BS EN 60384-1 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
    13/30289547 DC : 0 BS EN 60384-18 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 18: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC SURFACE MOUNT CAPACITORS WITH SOLID (MNO2) AND NON-SOLID ELECTROLYTE
    NF EN 60384-14-1 : 2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 14-1: BLANK DETAIL SPECIFICATION - FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION AND CONNECTION TO THE SUPPLY MAINS - ASSESSMENT LEVEL DZ
    BS EN 60384-21:2012 (published 2012-04) Fixed capacitors for use in electronic equipment Sectional specification. Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1
    BS EN 60115-8 : 2012 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT RESISTORS
    BS EN 60393-2 : 2016 POTENTIOMETERS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION - LEAD-SCREW ACTUATED AND ROTARY PRESET POTENTIOMETERS
    I.S. EN 62047-4:2010 SEMICONDUCTOR DEVICES - MICRO-ELECTROMECHANICAL DEVICES - PART 4: GENERIC SPECIFICATION FOR MEMS
    CEI EN 60115-8 : 2013 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT RESISTORS
    CEI EN 60384-14 : 2014 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 14: SECTIONAL SPECIFICATION - FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION AND CONNECTION TO THE SUPPLY MAINS
    BS EN 140401-802 : 2007 DETAIL SPECIFICATION: FIXED LOW POWER FILM SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 1; 2
    14/30311384 DC : 0 BS EN 60115-2:2014+A1 - FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION: LEADED FIXED LOW POWER FILM RESISTORS
    CEI EN 60384-18 : 2007 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 18: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC SURFACE MOUNT CAPACITORS WITH SOLID (MNO[2]) AND NON-SOLID ELECTROLYTE
    NF EN 60115-8-1 : 2016 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8-1: BLANK DETAIL SPECIFICATION: FIXED SURFACE MOUNT (SMD) LOW POWER FILM RESISTORS FOR GENERAL ELECTRONIC EQUIPMENT, CLASSIFICATION LEVEL G
    I.S. EN 60384-25:2015 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 25: SECTIONAL SPECIFICATION - SURFACE MOUNT FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE
    BS EN 140401-801 : 2007 DETAIL SPECIFICATION: FIXED LOW POWER FILM SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 0,1; 0,25; 0,5; 1
    BS EN 140401-803 : 2007 DETAIL SPECIFICATION: FIXED LOW POWER FILM SMD RESISTORS - CYLINDRICAL - STABILITY CLASSES 0,05; 0,1; 0,25; 0,5; 1; 2
    BS EN 60384-8 : 2015 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8: SECTIONAL SPECIFICATION: FIXED CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1
    BS EN 62391-1:2016 Fixed electric double-layer capacitors for use in electric and electronic equipment Generic specification
    10/30237980 DC : DRAFT NOV 2010 BS IEC 60393-2 - POTENTIOMETERS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION: LEAD-SCREW ACTUATED AND ROTARY PRESET POTENTIOMETERS
    CEI EN 60384-15 : 1ED 2017 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 15: SECTIONAL SPECIFICATION: FIXED TANTALUM CAPACITORS WITH NON-SOLID OR SOLID ELECTROLYTE
    CEI EN 60384-3 : 2007 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 3: SECTIONAL SPECIFICATION - SURFACE MOUNT FIXED TANTALUM ELECTROLYTIC CAPACITORS WITH SOLID (MNO[2]) ELECTROLYTE
    07/30161526 DC : 0 BS EN 60115-8 - FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT RESISTORS
    13/30289551 DC : 0 BS EN 60384-3 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 3: SECTIONAL SPECIFICATION: SURFACE MOUNT FIXED TANTALUM ELECTROLYT CAPACITORS WITH MANGANESE DIOXIDE SOLID ELECTROLYTE
    BS EN 60115-8-1 : 2015 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8-1: BLANK DETAIL SPECIFICATION: FIXED SURFACE MOUNT (SMD) LOW POWER FILM RESISTORS FOR GENERAL ELECTRONIC EQUIPMENT, CLASSIFICATION LEVEL G
    12/30260721 DC : 0 BS EN 60384-25 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 25: SECTIONAL SPECIFICATION - SURFACE MOUNT FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE
    09/30209389 DC : 0 BS EN 60115-8-1 - FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8-1: BLANK DETAIL SPECIFICATION - FIXED CHIP RESISTORS - ASSESSMENT LEVEL E
    17/30355844 DC : DRAFT JUL 2017 BS EN 60384-21 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 21: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1
    I.S. EN 60115-2:2015 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION: LEADED FIXED LOW POWER FILM RESISTORS
    09/30214329 DC : 0 BS EN 60384-21 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 21: SECTIONAL SPECIFICATION: FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1
    CSA E60384.1 : 2014 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
    BS EN 60539-1:2016 DIRECTLY HEATED NEGATIVE TEMPERATURE COEFFICIENT THERMISTORS - PART 1: GENERIC SPECIFICATION (IEC 60539-1:2016)
    14/30315320 DC : 0 BS EN 60384-15 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 15: SECTIONAL SPECIFICATION: FIXED TANTALUM CAPACITORS WITH NON-SOLID OR SOLID ELECTROLYTE
    BS EN 60384-4:2016 Fixed capacitors for use in electronic equipment Sectional specification. Fixed aluminium electrolytic capacitors with solid (MnO2) and non-solid electrolyte
    BS EN 62047-4 : 2010 SEMICONDUCTOR DEVICES - MICRO-ELECTROMECHANICAL DEVICES - PART 4: GENERIC SPECIFICATION FOR MEMS
    CEI EN 60384-2 : 2013 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION - FIXED METALLIZED POLYETHYLENE TEREPHTHALATE FILM DIELECTRIC D.C. CAPACITORS
    BS EN 60068-2-82 : 2007 ENVIRONMENTAL TESTING - PART 2-82: TESTS - TEST TX: WHISKER TEST METHODS FOR ELECTRONIC AND ELECTRIC COMPONENTS
    BS EN 60384-14 : 2013 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 14: SECTIONAL SPECIFICATION - FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION AND CONNECTION TO THE SUPPLY MAINS (IEC 60384-14:2013)
    13/30280854 DC : 0 BS EN 60384-8 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8: SECTIONAL SPECIFICATION: FIXED CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1
    BS EN 60384-19:2015 Fixed capacitors for use in electronic equipment Sectional specification: Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors
    BS IEC 60747-14.1 : 2010 SEMICONDUCTOR DEVICES - PART 14-1: SEMICONDUCTOR SENSORS - GENERIC SPECIFICATION FOR SENSORS
    BS EN 60384-3:2006 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 3: SECTIONAL SPECIFICATION: SURFACE MOUNT FIXED TANTALUM ELECTROLYTIC CAPACITORS WITH SOLID (MNO[2]) ELECTROLYTE
    BS EN 60384-25 : 2015 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 25: SECTIONAL SPECIFICATION - SURFACE MOUNT FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE
    BS EN 61193-3 : 2013 QUALITY ASSESSMENT SYSTEMS - PART 3: SELECTION AND USE OF SAMPLING PLANS FOR PRINTED BOARD AND LAMINATE END-PRODUCT AND IN-PROCESS AUDITING
    09/30207307 DC : 0 BS EN 60115-2 - FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION: FIXED LOW-POWER NON-WIREWOUND RESISTORS
    BS EN 60384-15:2017 Fixed capacitors for use in electronic equipment Sectional specification: Fixed tantalum capacitors with non-solid or solid electrolyte
    17/30355848 DC : 0 BS EN 60384-22 ED.3.0 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 22: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC, CLASS 2
    BS EN 60384-1 : 2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
    I.S. EN 60384-18:2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 18: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC SURFACE MOUNT CAPACITORS WITH SOLID (MNO[2]) AND NON-SOLID ELECTROLYTE
    BS EN 60384-18:2016 Fixed capacitors for use in electronic equipment Sectional specification. Fixed aluminium electrolytic surface mount capacitors with solid (MnO2) and non-solid electrolyte
    14/30317306 DC : 0 BS EN 60115-8-1:2014+A1 - FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8-1: BLANK DETAIL SPECIFICATION: FIXED SURFACE MOUNT (SMD) LOW POWER FILM RESISTORS FOR GENERAL ELECTRONIC EQUIPMENT, CLASSIFICATION LEVEL G
    BS EN 60384-13 : 2012 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 13: SECTIONAL SPECIFICATION - FIXED POLYPROPYLENE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS
    EN 60384-2:2012 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION - FIXED METALLIZED POLYETHYLENE TEREPHTHALATE FILM DIELECTRIC D.C. CAPACITORS (IEC 60384-2:2011)
    I.S. EN 60384-21:2012 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 21: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1 (IEC 60384-21:2011 (EQV))
    BS EN 140101:2008 Blank Detail Specification. Fixed low power film resistors
    I.S. EN 60393-2:2016 POTENTIOMETERS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION - LEAD-SCREW ACTUATED AND ROTARY PRESET POTENTIOMETERS
    NF EN 60393-2 : 2016 POTENTIOMETERS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION - LEAD-SCREW ACTUATED AND ROTARY PRESET POTENTIOMETERS
    CSA E60384.14 : 2014 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 14: SECTIONAL SPECIFICATION - FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION AND CONNECTION TO THE SUPPLY MAINS
    I.S. EN 60115-8-1:2015 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8-1: BLANK DETAIL SPECIFICATION: FIXED SURFACE MOUNT (SMD) LOW POWER FILM RESISTORS FOR GENERAL ELECTRONIC EQUIPMENT, CLASSIFICATION LEVEL G
    CEI EN 60539-1 : 2009 DIRECTLY HEATED NEGATIVE TEMPERATURE COEFFICIENT THERMISTORS - PART 1: GENERIC SPECIFICATION
    IEC 60747-14-1:2010 SEMICONDUCTOR DEVICES - PART 14-1: SEMICONDUCTOR SENSORS - GENERIC SPECIFICATION FOR SENSORS
    I.S. EN 60384-8:2015 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8: SECTIONAL SPECIFICATION: FIXED CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1
    CEI EN 60384-23 : 2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 23: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT METALLIZED POLYETHYLENE NAPHTHALATE FILM DIELECTRIC DC CAPACITORS
    CEI EN 60384-14-2 : 2017 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 14-2: BLANK DETAIL SPECIFICATION - FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION AND CONNECTION TO THE SUPPLY MAINS - SAFETY TESTS ONLY
    NF EN 60384-18 : 2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 18: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC SURFACE MOUNT CAPACITORS WITH SOLID (MNO[2]) AND NON-SOLID ELECTROLYTE
    I.S. EN 140402:2015 BLANK DETAIL SPECIFICATION: FIXED LOW POWER WIREWOUND SURFACE MOUNT (SMD) RESISTORS
    CEI EN 60384-21 : 2013 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 21: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1
    BS EN 60115-1 : 2011 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
    CEI EN 60384-13 : 2013 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 13: SECTIONAL SPECIFICATION - FIXED POLYPROPYLENE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS
    BS EN 60384-23:2015 Fixed capacitors for use in electronic equipment Sectional specification. Fixed surface mount metallized polyethylene naphthalate film dielectric DC capacitors
    I.S. EN 60384-3:2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 3: SECTIONAL SPECIFICATION - SURFACE MOUNT FIXED TANTALUM ELECTROLYTIC CAPACITORS WITH SOLID (MNO[2]) ELECTROLYTE
    I.S. EN 60393-5:2016 POTENTIOMETERS FOR USE IN ELECTRONIC EQUIPMENT - PART 5: SECTIONAL SPECIFICATION - SINGLE-TURN ROTARY LOW-POWER WIREWOUND AND NONWIREWOUND POTENTIOMETERS
    I.S. EN 140101:2008 BLANK DETAIL SPECIFICATION: FIXED LOW POWER FILM RESISTORS
    I.S. EN 140401-804:2011 DETAIL SPECIFICATION: FIXED LOW POWER FILM HIGH STABILITY SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 0,1; 0,25
    BS EN 60384-2:2012 (published 2012-04) Fixed capacitors for use in electronic equipment Sectional specification. Fixed metallized polyethylene terephthalate film dielectric d.c. capacitors
    BS EN 140402 : 2015 BLANK DETAIL SPECIFICATION: FIXED LOW POWER WIREWOUND SURFACE MOUNT (SMD) RESISTORS
    BS EN 60384-24 : 2015 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 24: SECTIONAL SPECIFICATION - SURFACE MOUNT FIXED TANTALUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE (IEC 60384-24:2015)
    I.S. EN 60384-24:2015 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 24: SECTIONAL SPECIFICATION - SURFACE MOUNT FIXED TANTALUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE
    I.S. EN 140101-806:2009 DETAIL SPECIFICATION: FIXED LOW POWER FILM RESISTORS - METAL FILM RESISTORS ON HIGH GRADE CERAMIC, CONFORMAL COATED OR MOLDED, AXIAL OR PREFORMED LEADS
    I.S. EN 60115-8:2012 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT RESISTORS (IEC 60115-8:2009 (MOD))
    I.S. EN 61193-3:2013 QUALITY ASSESSMENT SYSTEMS - PART 3: SELECTION AND USE OF SAMPLING PLANS FOR PRINTED BOARD AND LAMINATE END-PRODUCT AND IN-PROCESS AUDITING (IEC 61193-3:2013 (EQV))
    I.S. EN 60384-1:2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
    I.S. EN 60068-2-82:2007 ENVIRONMENTAL TESTING - PART 2-82: TESTS - TEST TX: WHISKER TEST METHODS FOR ELECTRONIC AND ELECTRIC COMPONENTS
    I.S. EN 140401:2009 BLANK DETAIL SPECIFICATION: FIXED LOW POWER FILM SURFACE MOUNT (SMD) RESISTORS
    BS EN 60384-9:2015 (published 2015-05) Fixed capacitors for use in electronic equipment Sectional specification: Fixed capacitors of ceramic dielectric, Class 2
    I.S. EN 60384-2:2012 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION - FIXED METALLIZED POLYETHYLENE TEREPHTHALATE FILM DIELECTRIC D.C. CAPACITORS (IEC 60384-2:2011 (EQV))
    I.S. EN 60384-15:2017 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 15: SECTIONAL SPECIFICATION: FIXED TANTALUM CAPACITORS WITH NON-SOLID OR SOLID ELECTROLYTE
    I.S. EN 60384-20:2015 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 20: SECTIONAL SPECIFICATION - FIXED METALLIZED POLYPHENYLENE SULFIDE FILM DIELECTRIC SURFACE MOUNT D.C. CAPACITORS
    I.S. EN 140402-801:2015 DETAIL SPECIFICATION: FIXED LOW POWER WIREWOUND SURFACE MOUNT (SMD) RESISTORS - RECTANGULAR - STABILITY CLASSES 0,5; 1; 2
    BS EN 140101-806 : 2008 DETAIL SPECIFICATION: FIXED LOW POWER FILM RESISTORS - METAL FILM RESISTORS ON HIGH GRADE CERAMIC, CONFORMAL COATED OR MOLDED, AXIAL OR PREFORMED LEADS
    CEI EN 60384-8 : 2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8: SECTIONAL SPECIFICATION: FIXED CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1
    I.S. EN 60384-14-2:2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 14-2: BLANK DETAIL SPECIFICATION - FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION AND CONNECTION TO THE SUPPLY MAINS - SAFETY TESTS ONLY
    I.S. EN 60384-9:2015 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 9: SECTIONAL SPECIFICATION: FIXED CAPACITORS OF CERAMIC DIELECTRIC, CLASS 2
    IEC 62391-1:2015 RLV Fixed electric double-layer capacitors for use in electric and electronic equipment - Part 1: Generic specification
    IEC 62391-1:2015 Fixed electric double-layer capacitors for use in electric and electronic equipment - Part 1: Generic specification
    I.S. EN 60384-14-1:2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 14-1: BLANK DETAIL SPECIFICATION - FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION AND CONNECTION TO THE SUPPLY MAINS - ASSESSMENT LEVEL DZ
    BS EN 140401-804 : 2011 DETAIL SPECIFICATION: FIXED LOW POWER FILM HIGH STABILITY SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 0,1; 0,25
    BS EN 140401 : 2009 BLANK DETAIL SPECIFICATION: FIXED LOW POWER FILM SURFACE MOUNT (SMD) RESISTORS
    IEC 60539-1:2016 Directly heated negative temperature coefficient thermistors - Part 1: Generic specification
    I.S. EN 60384-22:2012 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 22: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC, CLASS 2 (IEC 60384-22:2011 (EQV))
    I.S. EN 60393-6:2016 POTENTIOMETERS FOR USE IN ELECTRONIC EQUIPMENT - PART 6: SECTIONAL SPECIFICATION - SURFACE MOUNT PRESET POTENTIOMETERS
    CEI EN 60384-22 : 2013 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 22: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC, CLASS 2
    IEC 60384-8:2015 Fixed capacitors for use in electronic equipment - Part 8: Sectional specification: Fixed capacitors of ceramic dielectric, Class 1
    EN 140401-802:2007/A3:2017 DETAIL SPECIFICATION: FIXED LOW POWER FILM SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 1; 2
    CEI EN 60384-4 : 2007 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 4: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH SOLID (MNO[2]) AND NON-SOLID ELECTROLYTE
    NF EN 60384-23 : 2015 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 23: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT METALLIZED POLYETHYLENE NAPHTHALATE FILM DIELECTRIC DC CAPACITORS
    NF EN 60115-2 : 2015 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION: LEADED FIXED LOW POWER FILM RESISTORS
    EN 60384-1:2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION (IEC 60384-1:2016)
    NF EN 60393-6 : 2016 POTENTIOMETERS FOR USE IN ELECTRONIC EQUIPMENT - PART 6: SECTIONAL SPECIFICATION - SURFACE MOUNT PRESET POTENTIOMETERS
    I.S. EN 60384-4:2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 4: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH SOLID (MNO[2]) AND NON-SOLID ELECTROLYTE
    BS EN 60384-20:2015 Fixed capacitors for use in electronic equipment Sectional specification. Fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors
    I.S. EN 60384-23:2015 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 23: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT METALLIZED POLYETHYLENE NAPHTHALATE FILM DIELECTRIC DC CAPACITORS
    EN 60384-25 : 2015 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 25: SECTIONAL SPECIFICATION - SURFACE MOUNT FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE (IEC 60384-25:2015)
    I.S. EN 140401-801:2007 DETAIL SPECIFICATION: FIXED LOW POWER FILM SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 0,1; 0,25; 0,5; 1
    I.S. EN 60384-13:2012 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 13: SECTIONAL SPECIFICATION - FIXED POLYPROPYLENE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS (IEC 60384-13:2011 (EQV))
    IEC 60384-1 REDLINE : 5ED 2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
    I.S. EN 60539-1:2016 DIRECTLY HEATED NEGATIVE TEMPERATURE COEFFICIENT THERMISTORS - PART 1: GENERIC SPECIFICATION
    I.S. EN 140401-802:2007 DETAIL SPECIFICATION: FIXED LOW POWER FILM SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 1; 2
    I.S. EN 140401-803:2007 DETAIL SPECIFICATION: FIXED LOW POWER FILM SMD RESISTORS - CYLINDRICAL - STABILITY CLASSES 0,05; 0,1; 0,25; 0,5; 1; 2
    I.S. EN 60384-14:2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 14: SECTIONAL SPECIFICATION - FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION AND CONNECTION TO THE SUPPLY MAINS
    I.S. EN 62391-1:2016 FIXED ELECTRIC DOUBLE-LAYER CAPACITORS FOR USE IN ELECTRIC AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
    IEC 60115-2:2014 Fixed resistors for use in electronic equipment - Part 2: Sectional specification: Leaded fixed low power film resistors
    IEC 60115-1:2008 Fixed resistors for use in electronic equipment - Part 1: Generic specification
    IEC 60115-8:2009 Fixed resistors for use in electronic equipment - Part 8: Sectional specification - Fixed surface mount resistors
    IEC 60384-15:2017 Fixed capacitors for use in electronic equipment - Part 15: Sectional specification: Fixed tantalum capacitors with non-solid or solid electrolyte
    I.S. EN 60115-1:2011 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION (IEC 60115-1:2008, MODIFIED)
    IEC 60115-8-1:2014 Fixed resistors for use in electronic equipment - Part 8-1: Blank detail specification: Fixed surface mount (SMD) low power film resistors for general electronic equipment, classification level G
    I.S. EN 140100:2008 SECTIONAL SPECIFICATION: FIXED LOW POWER FILM RESISTORS
    EN 140401-803 : 2007 AMD 3 2017 DETAIL SPECIFICATION: FIXED LOW POWER FILM SMD RESISTORS - CYLINDRICAL - STABILITY CLASSES 0,05; 0,1; 0,25; 0,5; 1; 2
    EN 140101-806 : 2008 COR 2014 DETAIL SPECIFICATION: FIXED LOW POWER FILM RESISTORS - METAL FILM RESISTORS ON HIGH GRADE CERAMIC, CONFORMAL COATED OR MOLDED, AXIAL OR PREFORMED LEADS
    EN 140401-801:2007/A1:2013 DETAIL SPECIFICATION: FIXED LOW POWER FILM SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 0,1; 0,25; 0,5; 1
    EN 60384-24:2015/AC:2017-01 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 24: SECTIONAL SPECIFICATION - SURFACE MOUNT FIXED TANTALUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE (IEC 60384-24:2015/COR1:2016)
    EN 60539-1:2016/AC:2017-09 DIRECTLY HEATED NEGATIVE TEMPERATURE COEFFICIENT THERMISTORS - PART 1: GENERIC SPECIFICATION (IEC 60539-1:2016/COR1:2017)
    EN 60115-1:2011/A11:2015 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
    IEC 60384-3:2016 Fixed capacitors for use in electronic equipment - Part 3: Sectional specification - Surface mount fixed tantalum electrolytic capacitors with solid (MnO2) electrolyte
    IEC 60384-24:2015 Fixed capacitors for use in electronic equipment - Part 24: Sectional specification - Fixed tantalum electrolytic surface mount capacitors with conductive polymer solid electrolyte
    IEC 60393-6:2015 Potentiometers for use in electronic equipment - Part 6: Sectional specification - Surface mount preset potentiometers
    IEC 60384-14-1:2016 Fixed capacitors for use in electronic equipment - Part 14-1: Blank detail specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains - Assessment level DZ
    IEC 60384-19:2015 Fixed capacitors for use in electronic equipment - Part 19: Sectional specification: Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors
    IEC 60384-2:2011 Fixed capacitors for use in electronic equipment - Part 2: Sectional specification - Fixed metallized polyethylene terephthalate film dielectric d.c. capacitors
    IEC 60384-1:2016 Fixed capacitors for use in electronic equipment - Part 1: Generic specification
    IEC 60384-23:2015 Fixed capacitors for use in electronic equipment - Part 23: Sectional specification - Fixed metallized polyethylene naphthalate film dielectric surface mount d.c. capacitors
    IEC 60384-25:2015 Fixed capacitors for use in electronic equipment - Part 25: Sectional specification: Fixed aluminium electrolytic surface mount capacitors with conductive polymer solid electrolyte
    IEC 60384-9:2015 Fixed capacitors for use in electronic equipment - Part 9: Sectional specification: Fixed capacitors of ceramic dielectric, Class 2
    IEC 60384-14:2013+AMD1:2016 CSV Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains
    IEC 60384-14-2:2016 Fixed capacitors for use in electronic equipment - Part 14-2: Blank detail specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains - Safety tests only
    IEC 60384-18:2016 Fixed capacitors for use in electronic equipment - Part 18: Sectional specification - Fixed aluminium electrolytic surface mount capacitors with solid (MnO2) and non-solid electrolyte
    IEC 61193-3:2013 Quality assessment systems - Part 3: Selection and use of sampling plans for printed board and laminate end-product and in-process auditing
    IEC 60393-5:2015 Potentiometers for use in electronic equipment - Part 5: Sectional specification - Single-turn rotary low-power wirewound and non-wirewound potentiometers
    IEC 60384-4:2016 Fixed capacitors for use in electronic equipment - Part 4: Sectional specification - Fixed aluminium electrolytic capacitors with solid (MnO2) and non-solid electrolyte
    IEC 60384-21:2011 Fixed capacitors for use in electronic equipment - Part 21: Sectional specification - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1
    IEC 62391-1 : 2.0 FIXED ELECTRIC DOUBLE-LAYER CAPACITORS FOR USE IN ELECTRIC AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
    IEC 60384-20:2015 Fixed capacitors for use in electronic equipment - Part 20: Sectional specification - Fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors
    BS EN 140402-801 : 2015 DETAIL SPECIFICATION: FIXED LOW POWER WIREWOUND SURFACE MOUNT (SMD) RESISTORS - RECTANGULAR - STABILITY CLASSES 0,5; 1; 2
    IEC 60384-22:2011 Fixed capacitors for use in electronic equipment - Part 22: Sectional specification - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2
    IEC 60393-2:2015 Potentiometers for use in electronic equipment - Part 2: Sectional specification - Lead-screw actuated and rotary preset potentiometers
    IEC 60068-2-82:2007 Environmental testing - Part 2-82: Tests - Test XW1: Whisker test methods for electronic and electric components
    IEC 62047-4:2008 Semiconductor devices - Micro-electromechanical devices - Part 4: Generic specification for MEMS
    IEC 60384-13:2011 Fixed capacitors for use in electronic equipment - Part 13: Sectional specification - Fixed polypropylene film dielectric metal foil d.c. capacitors
    EN 140401-804:2011/A1:2013 DETAIL SPECIFICATION: FIXED LOW POWER FILM HIGH STABILITY SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 0,1; 0,25
    EN 60384-13:2012 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 13: SECTIONAL SPECIFICATION - FIXED POLYPROPYLENE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS (IEC 60384-13:2011)
    IEC 60384-1:2016 RLV Fixed capacitors for use in electronic equipment - Part 1: Generic specification
    EN 60384-22:2012 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 22: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC, CLASS 2 (IEC 60384-22:2011)
    EN 60384-18:2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 18: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC SURFACE MOUNT CAPACITORS WITH SOLID (MNO[2]) AND NON-SOLID ELECTROLYTE (IEC 60384-18:2016)
    EN 60384-8:2015/AC:2017-09 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8: SECTIONAL SPECIFICATION: FIXED CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1 (IEC 60384-8:2015/COR1:2017)
    EN 140402-801:2015 DETAIL SPECIFICATION: FIXED LOW POWER WIREWOUND SURFACE MOUNT (SMD) RESISTORS - RECTANGULAR - STABILITY CLASSES 0,5; 1; 2
    EN 60384-3 : 2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 3: SECTIONAL SPECIFICATION - SURFACE MOUNT FIXED TANTALUM ELECTROLYTIC CAPACITORS WITH SOLID (MNO[2]) ELECTROLYTE
    EN 140101:2008 Blank Detail Specification: Fixed low power film resistors
    EN 60384-20:2015 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 20: SECTIONAL SPECIFICATION - FIXED METALLIZED POLYPHENYLENE SULFIDE FILM DIELECTRIC SURFACE MOUNT D.C. CAPACITORS (IEC 60384-20:2015)
    EN 60115-2 : 2015 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION: LEADED FIXED LOW POWER FILM RESISTORS (IEC 60115-2:2014, MODIFIED)
    EN 140401:2009 BLANK DETAIL SPECIFICATION: FIXED LOW POWER FILM SURFACE MOUNT (SMD) RESISTORS
    EN 140402:2015/A1:2016 BLANK DETAIL SPECIFICATION: FIXED LOW POWER WIREWOUND SURFACE MOUNT (SMD) RESISTORS
    EN 60384-14-1:2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 14-1: BLANK DETAIL SPECIFICATION - FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION AND CONNECTION TO THE SUPPLY MAINS - ASSESSMENT LEVEL DZ (IEC 60384-14-1:2016)
    EN 60384-23:2015 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 23: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT METALLIZED POLYETHYLENE NAPHTHALATE FILM DIELECTRIC DC CAPACITORS (IEC 60384-23:2015)
    EN 61193-3 : 2013 QUALITY ASSESSMENT SYSTEMS - PART 3: SELECTION AND USE OF SAMPLING PLANS FOR PRINTED BOARD AND LAMINATE END-PRODUCT AND IN-PROCESS AUDITING (IEC 61193-3:2013)
    NF EN 60384-13 : 2012 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 13: SECTIONAL SPECIFICATION - FIXED POLYPROPYLENE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS
    EN 60384-14-2:2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 14-2: BLANK DETAIL SPECIFICATION - FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION AND CONNECTION TO THE SUPPLY MAINS - SAFETY TESTS ONLY (IEC 60384-14-2:2016)
    EN 60384-9:2015 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 9: SECTIONAL SPECIFICATION: FIXED CAPACITORS OF CERAMIC DIELECTRIC, CLASS 2 (IEC 60384-9:2015)
    EN 60393-6 : 2016 POTENTIOMETERS FOR USE IN ELECTRONIC EQUIPMENT - PART 6: SECTIONAL SPECIFICATION - SURFACE MOUNT PRESET POTENTIOMETERS (IEC 60393-6:2015)
    EN 60115-8 : 2012 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT RESISTORS (IEC 60115-8:2009, MODIFIED)
    EN 60393-5 : 2016 Potentiometers for use in electronic equipment - Part 5: Sectional specification - Single-turn rotary low-power wirewound and nonwirewound potentiometers
    EN 60384-21:2012 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 21: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1 (IEC 60384-21:2011)
    EN 60384-4:2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 4: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH SOLID (MNO[2]) AND NON-SOLID ELECTROLYTE (IEC 60384-4:2016)
    EN 60068-2-82:2007 Environmental testing - Part 2-82: Tests - Test XW1: Whisker test methods for electronic and electric components
    EN 60115-8-1 : 2015 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8-1: BLANK DETAIL SPECIFICATION: FIXED SURFACE MOUNT (SMD) LOW POWER FILM RESISTORS FOR GENERAL ELECTRONIC EQUIPMENT, CLASSIFICATION LEVEL G (IEC 60115-8-1:2014, MODIFIED)
    EN 62391-1:2016/AC:2016-12 FIXED ELECTRIC DOUBLE-LAYER CAPACITORS FOR USE IN ELECTRIC AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION (IEC 62391-1:2015/COR1:2016)
    EN 140100:2008 SECTIONAL SPECIFICATION: FIXED LOW POWER FILM RESISTORS
    EN 60384-19:2015 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 19: SECTIONAL SPECIFICATION: FIXED METALLIZED POLYETHYLENE-TEREPHTHALATE FILM DIELECTRIC SURFACE MOUNT D.C. CAPACITORS (IEC 60384-19:2015)
    EN 60393-2 : 2016 POTENTIOMETERS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION - LEAD-SCREW ACTUATED AND ROTARY PRESET POTENTIOMETERS (IEC 60393-2:2015)
    EN 60384-15 : 2017 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 15: SECTIONAL SPECIFICATION: FIXED TANTALUM CAPACITORS WITH NON-SOLID OR SOLID ELECTROLYTE (IEC 60384-15:2017)
    EN 62047-4 : 2010 SEMICONDUCTOR DEVICES - MICRO-ELECTROMECHANICAL DEVICES - PART 4: GENERIC SPECIFICATION FOR MEMS

    Standards Referencing This Book - (Show below) - (Hide below)

    IEC 62421:2007 ELECTRONICS ASSEMBLY TECHNOLOGY - ELECTRONIC MODULES
    IEC 60410:1973 Sampling plans and procedures for inspection by attributes
    ISO 3534-2:2006 Statistics Vocabulary and symbols Part 2: Applied statistics
    IEC 60194:2015 Printed board design, manufacture and assembly - Terms and definitions
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective