Skip to content
Please enter a keyword to search

  • IEC 61300-1:2016

    View superseded by
    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
    View superseded by

    Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Superseded date:  04-04-2022

    Language(s):  English - French, Spanish, Castilian

    Published date:  28-07-2016

    Publisher:  International Electrotechnical Committee

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    FOREWORD
    INTRODUCTION
    1 Scope
    2 Normative references
    3 Terms, definitions and abbreviations
    4 Requirements for the IEC 61300-2 series and the
       IEC 61300-3 series
    5 Standard atmospheric conditions
    6 Significance of the numerical value of a quantity
    7 Graphical symbols and terminology
    8 Safety
    9 Calibration
    10 Launch conditions
    Annex A (normative) - Multimode launch condition
            requirement for measuring attenuation of
            components terminated on IEC 60793-2-10
            type A1a and A1b fibres
    Bibliography

    Abstract - (Show below) - (Hide below)

    IEC 61300-1:2016 provides general information and guidance for the basic test and measurement procedures defined in the IEC 61300-2 and IEC 61300-3 series for interconnecting devices and passive components. This standard should be used in combination with the relevant specification which will define the tests to be used, the required degree of severity for each of them, their sequence, if relevant, and the permissible performance limits. In the event of conflict between this basic standard and the relevant specification, the latter will take precedence. This fourth edition cancels and replaces the third edition published in 2011. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: reconsideration of the terms and definitions; addition of Clause 4. Keywords: test and measurement procedures for interconnecting devices and passive components

    General Product Information - (Show below) - (Hide below)

    Committee TC 86/SC 86B
    Development Note Stability Date: 2020. (08/2016)
    Document Type Standard
    Publisher International Electrotechnical Committee
    Status Superseded
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    I.S. EN 61300-2-10:2012 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-10: TESTS - CRUSH RESISTANCE (IEC 61300-2-10:2012 (EQV))
    09/30189791 DC : 0 BS EN 61300-3-44 ED.1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-44: EXAMINATIONS AND MEASUREMENTS - FIBRE OPTIC RECEPTACLE CONNECTOR ENDFACE VISUAL AND AUTOMATED INSPECTION
    13/30289499 DC : 0 BS EN 61300-3-14 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TESTAND MEASUREMENT PROCEDURES - PART 3-14: EXAMINATIONS AND MEASUREMENTS - ERROR AND REPEATABILITY OF THE ATTENUATION SETTINGS OF A VARIABLE OPTICAL ATTENUATOR
    08/30171606 DC : DRAFT JUNE 2008 BS EN 61753-111-8 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 111-8: SEALED CLOSURES FOR CATEGORY G - GROUND
    CEI EN 61300-2-44 : 2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-44: TESTS - FLEXING OF THE STRAIN RELIEF OF FIBRE OPTIC DEVICES
    CEI EN 61300-3-49 : 2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-49: EXAMINATIONS AND MEASUREMENTS - GUIDE PIN RETENTION FORCE FOR RECTANGULAR FERRULE MULTI-FIBRE CONNECTORS
    10/30216926 DC : 0 BS EN 50411-3-3 - FIRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATION - PART 3-3: SINGLEMODE OPTICAL FIBRE FUSION SPLICE PROTECTORS
    BS EN 50411-3-3:2011 Fibre organisers and closures to be used in optical fibre communication systems. Product specifications Singlemode optical fibre fusion splice protectors
    I.S. EN 61300-3-49:2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-49: EXAMINATIONS AND MEASUREMENTS - GUIDE PIN RETENTION FORCE FOR RECTANGULAR FERRULE MULTI-FIBRE CONNECTORS (IEC 61300-3-49:2013 (EQV))
    07/30170606 DC : DRAFT AUG 2007 BS EN 61300-2-9 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-9: TESTS - SHOCK
    BS ISO/IEC 11801-1:2017 Information technology. Generic cabling for customer premises General requirements
    BS EN 61300-3-50:2013 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Examinations and measurements. Crosstalk for optical spatial switches
    09/30200624 DC : 0 BS EN 61300-3-46 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-46: MEASUREMENT OF GUIDE PIN BORE DIAMETER IN MT FERRULES
    BS EN 61300-2-5:2011 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Tests. Torsion
    17/30350665 DC : 0 BS EN 61300-3-21 ED.3.0 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-21: EXAMINATIONS AND MEASUREMENTS - SWITCHING TIME
    I.S. EN 61753-111-7:2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 111-7: SEALED CLOSURES FOR CATEGORY A - AERIAL
    CEI EN 61300-2-18 : 2006 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-18: TESTS - DRY HEAT - HIGH TEMPERATURE ENDURANCE
    BS EN 61753-101-2:2006 Fibre optic interconnecting devices and passive components performance standard Fibre management systems for category C. Controlled environment
    04/30124761 DC : DRAFT NOV 2004 IEC 61300-2-36 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-36: TESTS - FLAMMABILITY (FIRE HAZARD)
    CEI EN 61753-121-2 : 2012 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARDS - PART 121-2: SIMPLEX AND DUPLEX CORDS WITH SINGLEMODE FIBRE AND CYLINDRICAL FERRULE CONNECTORS FOR CATEGORY C - CONTROLLED ENVIRONMENT
    BS EN 61300-2-39:1997 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests Susceptibility to external magnetic fields
    BS EN 61753-121-2:2017 Fibre optic interconnecting devices and passive components. Performance standard Simplex and duplex cords with single-mode fibre and cylindrical ferrule connectors for category C. Controlled environment
    I.S. EN 61300-2-16:2006 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-16: TESTS - MOULD GROWTH
    14/30299574 DC : 0 BS EN 61300-2-9 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-9: TESTS - SHOCK
    08/30174656 DC : DRAFT SEP 2008 BS EN 61202-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC ISOLATORS - PART 1: GENERIC SPECIFICATION
    01/208262 DC : DRAFT NOV 2001 IEC 61300-2-42 ED.2 - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-42: TESTS - STATIC SIDE LOAD FOR CONNECTORS
    07/30172991 DC : 0 BS EN 61300-3-34 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-34: EXAMINATIONS AND MEASUREMENTS - ATTENUATION OF RANDOM MATED CONNECTORS
    CEI EN 61300-3-45 : 2012 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-45: EXAMINATIONS AND MEASUREMENTS - ATTENUATION OF RANDOM MATED MULTI-FIBRE CONNECTORS
    BS EN 61300-2-22:2007 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Tests. Change of temperature
    11/30256039 DC : 0 BS EN 61300-3-50 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-50: EXAMINATIONS AND MEASUREMENTS - CROSSTALK FOR OPTICAL SPATIAL SWITCHES
    06/30159311 DC : 0 BS EN 61300-3-13 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-13: EXAMINATIONS AND MEASUREMENTS - CONTROL STABILITY OF A FIBRE OPTIC SWITCH
    06/30159323 DC : 0 BS EN 61300-3-9 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-9: EXAMINATIONS AND MEASUREMENTS - CROSSTALK
    07/30166373 DC : 0 BS EN 61300-2-44 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-44: TESTS - FLEXING OF THE STRAIN RELIEF OF FIBRE OPTIC DEVICES
    BS EN 61300-3-45:2011 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Examinations and measurements. Attenuation of random mated multi-fibre connectors
    11/30245244 DC : 0 BS EN 61300-2-11 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-11: TESTS - AXIAL COMPRESSION
    NF EN 61300-3-42 : 2008 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-42: EXAMINATIONS AND MEASUREMENTS - ATTENUATION OF SINGLE MODE ALIGNMENT SLEEVES AND OR ADAPTORS WITH RESILIENT ALIGNMENT SLEEVES
    NF EN 61300 3-4 : 2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-4: EXAMINATIONS AND MEASUREMENTS - ATTENUATION
    CEI EN 61753-101-3 : 2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 101-3: FIBRE MANAGEMENT SYSTEMS FOR CATEGORY U - UNCONTROLLED ENVIRONMENT
    BS EN 61300-2-23:1997 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests Sealing for non-pressurized closures of fibre optic devices
    CEI EN 61300-2-21 : 2011 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-21: TESTS - COMPOSITE TEMPERATURE/HUMIDITY CYCLIC TEST
    BS EN 61300-3-34:2009 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Examinations and measurements. Attenuation of random mated connectors
    BS EN 61300-2-1:2009 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Tests. Vibration (sinusoidal)
    BS EN 61300-3-26:2002 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements Measurement of the angular misalignment between fibre and ferrule axes
    BS EN 62005-1:2001 Reliability of fibre optic interconnecting devices and passive optical components Introductory guide and definitions
    BS EN 61300-2-9:2017 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Tests. Shock
    CEI EN 61753-057-2 : 2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 057-2: SINGLE MODE FIBRE PLUG-RECPTACLE STYLE OPTICAL FUSE FOR CATEGORY C - CONTROLLED ENVIRONMENT
    BS EN 61300-2-10:2012 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Tests. Crush resistance
    BS EN 61300-3-21:2015 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Examinations and measurements. Switching time
    CEI EN 62496-2 : 1ED 2017 OPTICAL CIRCUIT BOARDS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2: GENERAL GUIDANCE FOR DEFINITION OF MEASUREMENT CONDITIONS FOR OPTICAL CHARACTERISTICS OF OPTICAL CIRCUIT BOARDS
    I.S. EN 61300-2-5:2011 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-5: TESTS - TORSION
    IEC 62496-2:2017 Optical circuit boards - Basic test and measurement procedures - Part 2: General guidance for definition of measurement conditions for optical characteristics of optical circuit boards
    CEI EN 61300-2-50 : 2008 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-50: TESTS - FIBRE OPTIC CONNECTOR PROOF TEST WITH STATIC LOAD - SINGLEMODE AND MULTIMODE
    I.S. EN 61753-056-2:2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 056-2: SINGLE MODE FIBRE PIGTAILED STYLE OPTICAL FUSE FOR CATEGORY C - CONTROLLED ENVIRONMENT (IEC 61753-056-2:2012 (EQV))
    I.S. EN 61300-2-1:2009 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-1: TESTS - VIBRATION (SINUSOIDAL)
    I.S. EN 61753-111-8:2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 111-8: SEALED CLOSURES FOR CATEGORY G - GROUND
    I.S. EN 61300-2-6:2011 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-6: TESTS - TENSILE STRENGTH OF COUPLING MECHANISM
    BS EN 61300-3-6:2009 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Examinations and measurements. Return loss
    I.S. EN 61300-3-4:2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-4: EXAMINATIONS AND MEASUREMENTS - ATTENUATION (IEC 61300-3-4:2012 (EQV))
    I.S. EN 61753-022-2:2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 022-2: FIBRE OPTIC CONNECTORS TERMINATED ON MULTIMODE FIBRE FOR CATEGORY C - CONTROLLED ENVIRONMENT (IEC 61753-022-2:2012 (EQV))
    I.S. EN 61300-2-42:2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-42: TESTS - STATIC SIDE LOAD FOR STRAIN RELIEF
    CEI EN 61300-2-39 : 1997 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-39: TESTS - SUSCEPTIBILITY TO EXTERNAL MAGNETIC FIELDS
    NF EN 61753-111-8 : 2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 111-8: SEALED CLOSURES FOR CATEGORY G - GROUND
    BS EN 61753-1-1:2001 Fibre optic interconnecting devices and passive components performance standard. General and guidance Interconnecting devices (connectors)
    NF EN 61753-111-9 : 2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 111-9: CLOSURES FOR CATEGORY S - SUBTERRANEAN
    I.S. EN 61300-2-2:2009 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-2: TESTS - MATING DURABILITY
    I.S. EN 61300-3-43:2009 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-43: EXAMINATIONS AND MEASUREMENTS - MODE TRANSFER FUNCTION MEASUREMENT FOR FIBRE OPTIC SOURCES
    I.S. EN 61753-111-9:2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 111-9: SEALED CLOSURES FOR CATEGORY S - SUBTERRANEAN
    I.S. EN 61300-2-9:2017 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-9: TESTS - SHOCK
    IEC 61300-2-2:2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-2: Tests - Mating durability
    IEC 61300-2-50:2007 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-50: Tests - Fibre optic connector proof test with static load - Singlemode and multimode
    IEC 61753-042-2:2014 Fibre optic interconnecting devices and passive components - Performance standard - Part 042-2: Plug-pigtail-style and plug-receptacle-style of OTDR reflecting devices for category C - Controlled environments
    UNE-EN 61300-3-28:2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-28: Examinations and measurements - Transient loss
    IEC 61300-2-38:2006 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-38: Tests - Sealing for pressurized fibre optic closures
    EN 61300-2-9:2017 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-9: Tests - Shock
    EN 50377-17-2:2015 Connector sets and Interconnect components to be used in optical fibre communication systems - Product specifications - Part 17-2: Type FPFT (factory polished field terminated) simplex connector factory terminated with EN 60793-2-50 category B1.3 fibre and field mounted onto reinforced cable containing IEC 60793-2-50 category B1.3 or B6a1 or B6a 2 singlemode fibre (with restricted MFD), category C
    EN 61300-3-43:2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-43: Examinations and measurements - Mode transfer function measurement for fibre optic sources
    EN 61300-2-22:2007 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-22: Tests - Change of temperature
    EN 61300-3-38 : 2012 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-38: EXAMINATIONS AND MEASUREMENTS - GROUP DELAY, CHROMATIC DISPERSION AND PHASE RIPPLE
    EN 61300-2-26:2007 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-26: Tests - Salt mist
    EN 61300-2-38:2006 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-38: Tests - Sealing for pressurized fibre optic closures
    EN 61300-3-14:2014 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-14: Examinations and measurements - Error and repeatability of the attenuation settings of a variable optical attenuator
    EN 61300-3-39:2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-39: Examinations and measurements - Physical contact (PC) optical connector reference plug selection for return loss measurements
    EN 61300-3-37:2005 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-37: Examinations and measurements - Endface angle of angle-polished optical fibres
    EN 61300-2-1:2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-1: Tests - Vibration (sinusoidal)
    EN 61300-3-45:2011 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-45: Examinations and measurements - Attenuation of random mated multi-fibre connectors
    EN 61300-2-55:2017 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-55: Tests - Strength of mounted adaptor
    EN 61300-2-6:2011 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-6: Tests - Tensile strength of coupling mechanism
    EN 61753-131-3:2011 Fibre optic interconnecting devices and passive components - Performance standard - Part 131-3: Single-mode mechanical fibre splice for category U - Uncontrolled environment
    EN 61753-056-2:2013 Fibre optic interconnecting devices and passive components - Performance standard - Part 056-2: Single mode fibre pigtailed style optical fuse for category C - Controlled environment
    EN 61300-3-1:2005 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-1: Examinations and measurements - Visual examination
    EN 61300-2-33:2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-33: Tests - Assembly and disassembly of fibre optic mechanical splices, fibre management systems and closures
    EN 61753-111-9:2010 Fibre optic interconnecting devices and passive components - Performance standard - Part 111-9: Sealed closures for category S - Subterranean
    EN 62343-1-2:2015 Dynamic modules - Part 1-2: Performance standards - Tuneable chromatic dispersion compensator (non-connectorized)
    EN 61753-121-2:2017 Fibre optic interconnecting devices and passive components - Performance standard - Part 121-2: Simplex and duplex cords with single-mode fibre and cylindrical ferrule connectors for category C - Controlled environment
    EN 50516-2-1 : 2011 INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-1: TYPE ODVA PC INDUSTRIAL TERMINATED ON EN 60793-2-10 CATEGORY A1A AND A1B MULTIMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY 1 (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN EN 50173-1 AND IEC 61753-1-3
    EN 61753-057-2:2013 Fibre optic interconnecting devices and passive components - Performance standard - Part 057-2: Single mode fibre plug-receptacle style optical fuse for category C - Controlled environment
    EN 61300-2-2:2009/corrigendum:2009 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-2: TESTS - MATING DURABILITY
    EN 61753-059-2:2013 Fibre optic interconnecting devices and passive components - Performance standard - Part 059-2: Single-mode fibre plug-receptacle style optical limiter for category C - Controlled environment
    EN 61300-2-49:2007 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-49: Tests - Connector installation test
    EN 61300-2-18:2005 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-18: Tests - Dry heat - High temperature endurance
    EN 61753-382-2:2016 Fibre optic interconnecting devices and passive components - Performance standard - Part 382-2: Non-connectorized single-mode bidirectional G-PON-NGA WWDM devices for category C - Controlled environment
    EN 61300-3-28:2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-28: Examinations and measurements - Transient loss
    EN 61753-101-3:2008 Fibre optic interconnecting devices and passive components performance standard - Part 101-3: Fibre management systems for Category U - Uncontrolled environment
    EN 61300-2-4:1997 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre/cable retention
    EN 61753-022-2:2013 Fibre optic interconnecting devices and passive components - Performance standard - Part 022-2: Fibre optic connectors terminated on multimode fibre for category C - Controlled environment
    EN 61300-3-5:2001 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-5: Examinations and measurements - Wavelength dependence of attenuation
    EN 50411-3-2:2011 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 3-2: Singlemode mechanical fibre splice
    EN 61300-2-11:2013 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-11: Tests - Axial compression
    EN 61300-3-15:2007 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-15: Examinations and measurements - Dome eccentricity of a convex polished ferrule endface
    EN 61753-111-7:2010 Fibre optic interconnecting devices and passive components - Performance standard - Part 111-7: Sealed closures for category A - Aerial
    04/30124691 DC : DRAFT NOV 2004 IEC 61300-3-2 ED.3 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-2: EXAMINATIONS AND MEASUREMENTS - POLARIZATION DEPENDENCE OF ATTENUATION IN A SINGLE-MODE FIBRE OPTIC DEVICE
    NF EN 61300-3-45 : 2011 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-45: EXAMINATIONS AND MEASUREMENTS - ATTENUATION OF RANDOM MATED MULTI-FIBRE CONNECTORS
    00/247278 DC : DRAFT DEC 2000
    17/30340366 DC : 0 BS IEC 61755-6-2 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR OPTICAL INTERFACES - PART 6-2: CONNECTION OF 50,0 [MU]M CORE DIAMETER MULTIMODE PHYSICALLY CONTACTING FIBRES - NON-ANGLED FOR REFERENCE CONNECTOR APPLICATION, AT WAVELENGTH OF 850 NM USING TRADITIONAL MACROBEND ATTENUATION FIBRE ONLY
    BS EN 61753-057-2:2013 Fibre optic interconnecting devices and passive components. Performance standard Single mode fibre plug-receptacle style optical fuse for category C. Controlled environment
    BS EN 61300-3-38:2012 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Examinations and measurements. Group delay, chromatic dispersion and phase ripple
    BS EN 61300-3-37:2005 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Examinations and measurements. Endface angle of angle- polished optical fibres
    BS EN 61300-2-16:2006 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Tests - Mould growth
    BS EN 50377-17-1:2013 Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type FPFT (factory polished field terminated) simplex connector factory terminated with EN 60793-2-50 category B1.3 fibre and field mounted onto IEC 60793-2-50 category B1.3 or B6a_1 or B6a_2 singlemode fibre, category C
    IEC TS 62661-2-1:2013 Optical backplanes - Product specification - Part 2-1: Optical backplane using optical fibre circuit boards and multi-core right angle optical connectors
    I.S. EN 50411-3-2:2011 FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-2: SINGLEMODE MECHANICAL FIBRE SPLICE
    07/30168177 DC : 0 BS EN 61300-2-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST MEASUREMENT PROCEDURES - PART 2-1: TESTS - VIBRATION (SINUSOIDAL)
    NF EN 61753-111-7 : 2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 111-7: SEALED CLOSURES FOR CATEGORY A - AERIAL
    BS EN 61753-382-2:2016 Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode bidirectional G-PON-NGA WWDM devices for category C. Controlled environment
    BS EN 61753-111-7:2010 Fibre optic interconnecting devices and passive components performance standard Sealed closures for category A. Aerial
    BS EN 61300-3-35:2015 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Examinations and measurements. Visual inspection of fibre optic connectors and fibre-stub transceivers
    BS EN 61753-101-3:2009 Fibre optic interconnecting devices and passive components performance standard Fibre management systems for category U. Uncontrolled environment
    BS EN 50411-3-2:2011 Fibre organisers and closures to be used in optical fibre communication systems. Product specifications Singlemode mechanical fibre splice
    04/300066 DC : DRAFT JAN 2004 IEC 61300-3-41 ED.1.0 - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-41: EXAMINATIONS AND MEASUREMENTS - LATERAL CORE OFFSET OF FIBRE ARRAYS
    BS EN 61753-041-2:2014 Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode OTDR reflecting device for category C. Controlled environment
    07/30173670 DC : 0 BS EN 62496-2-1/IEC 62496-2-1 - OPTICAL CIRCUIT BOARDS - PART 2-1: ATTENUATION AND ISOLATION MEASUREMENT PROCEDURES FOR OPTICAL CHARACTERISTICS
    BS EN 61300-2-38:2006 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Tests - Sealing for pressurized fibre optic closures
    01/207334 DC : DRAFT OCT 2001 IEC 61300-2-14 ED.2 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES PART 2-14: TESTS - HIGH POWER CHARACTERIZATION
    CEI EN 50411-3-3 : 2012 FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-3: SINGLEMODE OPTICAL FIBRE FUSION SPLICE PROTECTORS
    DD IEC PAS 61300-3-35 : DRAFT SEPT 2002 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-35: EXAMINATIONS AND MEASUREMENTS - FIBRE OPTIC CYLINDRICAL CONNECTOR ENDFACE VISUAL INSPECTION
    CEI EN 61300-3-33 : 2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-33: EXAMINATIONS AND MEASUREMENTS - WITHDRAWAL FORCE FROM A RESILIENT ALIGNMENT SLEEVE USING GAUGE PINS
    CEI EN 61300-2-33 : 2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-33: TESTS - ASSEMBLY AND DISASSEMBLY OF FIBRE OPTIC MECHANICAL SPLICES, FIBRE MANAGEMENT SYSTEMS AND CLOSURES
    CEI EN 61300-2-26 : 2008 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-26: TESTS - SALT MIST
    11/30244755 DC : 0 BS EN 61753-041-2 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 041-2: NON-CONNECTORISED SINGLE-MODE FTTX REFLECTOR DEVICE FOR CATEGORY C - CONTROLLED ENVIRONMENT
    07/30168153 DC : 0 BS EN 60875-1 - NON-WAVELENGTH-SELECTIVE FIBRE OPTIC BRANCHING DEVICES - PART 1: GENERIC SPECIFICATION
    04/30110871 DC : DRAFT MAR 2004 IEC 61300-2-49 ED 1.0 - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-49: TESTS - CONNECTOR INSTALLATION TEST
    EN 61753-111-8:2010 Fibre optic interconnecting devices and passive components - Performance standard - Part 111-8: Sealed closures for category G - Ground
    00/247277 DC : DRAFT DEC 2000 IEC 61300-2-18 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-18: TESTS- DRY HEAT - HIGH TEMPERATURE ENDURANCE
    BS IEC 61300-3-21 : 2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-21: EXAMINATIONS AND MEASUREMENTS - SWITCHING TIME
    BS EN 61300-3-28:2012 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Examinations and measurements. Transient loss
    BS EN 61300-2-43:2014 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Tests. Screen testing of return loss of single-mode PC optical fibre connectors
    10/30218221 DC : 0 BS EN 61314-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC FAN-OUTS - PART 1: GENERIC SPECIFICATION
    BS EN 61300-2-21:2010 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Tests. Composite temperature/humidity cyclic test
    CEI EN 61300-2-38 : 2007 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-38: TESTS - SEALING FOR PRESSURIZED FIBRE OPTIC CLOSURES
    CEI EN 62005-1 : 2002 RELIABILITY OF FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PART 1: INTRODUCTORY GUIDE AND DEFINITIONS
    10/30234010 DC : 0 BS EN 61300-3-35 ED.2 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-35: EXAMINATIONS AND MEASUREMENTS - FIBRE OPTIC CONNECTOR ENDFACE VISUAL AND AUTOMATED INSPECTION
    CEI EN 61300-2-17 : 2012 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-17: TESTS - COLD
    CEI EN 61300-2-34 : 2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-34: TESTS - RESISTANCE TO SOLVENTS AND CONTAMINATING FLUIDS OF INTERCONNECTING COMPONENTS AND CLOSURES
    CEI EN 61073-1 : 2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - MECHANICAL SPLICES AND FUSION SPLICE PROTECTORS FOR OPTICAL FIBRES AND CABLES - PART 1: GENERIC SPECIFICATION
    04/30122946 DC : DRAFT SEP 2004 IEC 61300-2-16 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-16: TESTS - MOULD GROWTH
    CEI EN 61753-131-3 : 2012 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 131-3: SINGLEMODE MECHANICAL FIBRE SPLICE FOR CATEGORY U - UNCONTROLLED ENVIRONMENT
    04/30116727 DC : DRAFT JULY 2004 IEC 61300-2-37 A1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-37: TESTS - CABLE BENDING FOR CLOSURES
    BS EN 61978-1:2014 Fibre optic interconnecting devices and passive components. Fibre optic passive chromatic dispersion compensators Generic specification
    07/30172748 DC : 0
    07/30168181 DC : 0 BS EN 61300-2-2 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-2: TESTS - MATING DURABILITY
    BS EN 61300-2-51:2007 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Tests. Fibre optic connector test for transmission with applied tensile load. Singlemode and multimode
    NF EN 62496-2-1 : 2011 OPTICAL CIRCUIT BOARDS - PART 2-1: MEASUREMENTS - OPTICAL ATTENUATION AND ISOLATION
    I.S. EN 61300-3-53:2015 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-53: EXAMINATIONS AND MEASUREMENTS - ENCIRCLED ANGULAR FLUX (EAF) MEASUREMENT METHOD BASED ON TWO-DIMENSIONAL FAR FIELD DATA FROM STEP INDEX MULTIMODE WAVEGUIDE (INCLUDING FIBRE)
    CEI EN 61300-2-55 : 1ED 2017 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-55: TESTS - STRENGTH OF MOUNTED ADAPTOR
    I.S. EN 60875-1:2015 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - NON-WAVELENGTH-SELECTIVE FIBRE OPTIC BRANCHING DEVICES - PART 1: GENERIC SPECIFICATION
    CEI EN 61300-2-22 : 2008 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-22: TESTS - CHANGE OF TEMPERATURE
    EN 62496-2:2017 Optical circuit boards - Basic test and measurement procedures - Part 2: General guidance for definition of measurement conditions for optical characteristics of optical circuit boards
    CEI EN 61300-2-23 : 2012 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-23: TESTS - SEALING FOR NON-PRESSURIZED CLOSURES OF FIBRE OPTIC DEVICES
    BS EN 61300-2-18:2005 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Tests. Dry heat. High temperature endurance
    I.S. EN 50411-3-3:2011 FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-3: SINGLEMODE OPTICAL FIBRE FUSION SPLICE PROTECTORS
    CEI EN 61300-2-48 : 2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-48: TESTS - TEMPERATURE-HUMIDITY CYCLING
    BS EN 60875-1:2015 Fibre optic interconnecting devices and passive components. Non-wavelength-selective fibre optic branching devices Generic specification
    NF EN 61753-131-3 : 2011 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 131-3: SINGLE-MODE MECHANICAL FIBRE SPLICE FOR CATEGORY U - UNCONTROLLED ENVIRONMENT
    IEC PAS 61300-3-35:2002 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-35: Examinations and measurements - Fibre optic cylindrical connector endface visual inspection
    IEC TR 62614-2:2015 Fibre optics - Multimode launch conditions - Part 2: Determination of launch condition requirements for measuring multimode attenuation
    IEC 61300-2-31:1995 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-31: Tests - Nuclear radiation
    IEC 61300-2-11:2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-11: Tests - Axial compression
    EN 61300-3-53:2015 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-53: Examinations and measurements - Encircled angular flux (EAF) measurement method based on two-dimensional far field data from step index multimode waveguide (including fibre)
    BS EN 61300-2-55:2017 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Tests. Strength of mounted adaptor
    CEI EN 61753-121-3 : 2012 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARDS - PART 121-3: SIMPLEX AND DUPLEX CORDS WITH SINGLEMODE FIBRE AND CYLINDRICAL FERRULE CONNECTORS FOR CATEGORY U - UNCONTROLLED ENVIRONMENT
    I.S. EN 61753-041-2:2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 041-2: NON-CONNECTORIZED SINGLE-MODE OTDR REFLECTING DEVICE FOR CATEGORY C - CONTROLLED ENVIRONMENT
    CEI EN 61300-3-4 : 2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-4: EXAMINATIONS AND MEASUREMENTS - ATTENUATION
    BS EN 50516-2-1:2011 Industrial connector sets and interconnect components to be used in optical fibre control and communication systems. Product specifications Type ODVA PC industrial terminated on EN 60793-2-10 category A1a and A1b multimode fibre to meet the requirements of category I (industrial environments) as specified in EN 50173-1 and IEC 61753-1-3
    08/30171613 DC : DRAFT JUNE 2008 BS EN 61753-111-9 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 111-9: CLOSURES FOR CATEGORY S - SUBTERRANEAN
    00/242786 DC : DRAFT JUN 2000 IEC 61753-1-1 - FIBRE OPTIC PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 1-1: GENERAL AND GUIDANCE
    BS EN 50516-1-1:2011 Industrial connector sets and interconnect components to be used in optical fibre control and communication systems. Product specifications Type SC-RJ PC industrial terminated on EN 60793-2-10 category A1a and A1b multimode fibre to meet the requirements of category I (industrial environments) as specified in IEC 61753-1-3
    04/30116723 DC : DRAFT JULY 2004 IEC 61300-2-33 AMD 1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-33: TESTS - ASSEMBLY AND DISASSEMBLY OF ENCLOSURES
    CEI EN 50516-1-1 : 2012 INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 1-1: TYPE SC-RJ PC INDUSTRIAL TERMINATED ON EN 60793-2-10 CATEGORY A1A AND A1B MULTIMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY I (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN IEC 61753-1-3
    DD IEC PAS 61753-1-3 : DRAFT 2009 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 1-3: GENERAL AND GUIDANCE FOR PERFORMANCE STANDARDS - SINGLE-MODE FIBRE OPTIC CONNECTOR PERFORMANCE FOR HARSH INDUSTRIAL OPERATING CONDITIONS
    BS EN 61300-2-52:2013 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Tests. Bending test for cords
    CEI EN 61300-2-1 : 2011 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-1: TESTS - VIBRATION (SINUSOIDAL)
    I.S. EN 61300-3-45:2011 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-45: EXAMINATIONS AND MEASUREMENTS - ATTENUATION OF RANDOM MATED MULTI-FIBRE CONNECTORS
    09/30201868 DC : 0 BS EN 61300-3-28 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-28: EXAMINATIONS AND MEASUREMENTS - TRANSIENT LOSS
    CEI EN 61300-2-12 : 2011 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-12: TESTS - IMPACT
    DD IEC PAS 61300-3-43 : DRAFT 2006 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-43: EXAMINATIONS AND MEASUREMENTS - MODE TRANSFER FUNCTION MEASUREMENT FOR FIBRE OPTIC SOURCES
    08/30191292 DC : DRAFT OCT 2008 BS EN 62077 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CIRCULATORS - GENERIC SPECIFICATION
    I.S. EN 61300-2-22:2007 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-22: TESTS - CHANGE OF TEMPERATURE
    09/30204284 DC : DRAFT MAY 2009 BS EN 61300-3-39 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-39: EXAMINATIONS AND MEASUREMENTS - PC OPTICAL CONNECTOR REFERENCE PLUG SELECTION
    BS EN 62496-2-1:2011 Optical circuit boards Measurements. Optical attenuation and isolation
    10/30218233 DC : 0 BS EN 61300-2-52 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-52: TESTS - BENDING TEST FOR TERMINATED CABLE ASSEMBLIES
    07/30164411 DC : 0 EN 61314-1 - FIBRE OPTIC FAN-OUTS - PART 1: GENERIC SPECIFICATION
    14/30285749 DC : 0 BS EN 50377-17-2 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 17-2: TYPE FPFT (FACTORY POLISHED FIELD TERMINATED) SIMPLEX CONNECTOR FACTORY TERMINATED WITH EN 60793-2-50 CATEGORY B1.3 FIBRE AND FIELD MOUNTED ONTO TIGHT JACKET CABLE CONTAINING IEC 60793-2-50 CATEGORY B1.3 OR B6A1 OR B6A 2 SIN
    BS EN 61300-2-14:2013 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Tests. High optical power
    BS EN 61300-2-31:1997 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests Nuclear radiation
    14/30297431 DC : 0 BS EN 60875-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - NON-WAVELENGTH-SELECTIVE FIBRE OPTIC BRANCHING DEVICES - PART 1: GENERIC SPECIFICATION
    04/30126747 DC : DRAFT DEC 2004 IEC 60874-1 ED.5 - CONNECTORS FOR OPTICAL FIBRES AND CABLES - PART 1: GENERIC SPECIFICATION
    08/30169101 DC : 0 BS EN 61978-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC PASSIVE CHROMATIC DISPERSION COMPENSATORS - PART 1: GENERIC SPECIFICATION
    BS EN 61300-2-26:2007 Fibre optic interconnecting devices and passive Components. Basic test and measurement procedures Tests. Salt mist
    13/30282261 DC : 0 BS EN 61300-2-37 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-37: TESTS - CABLE BENDING FOR FIBRE OPTIC CLOSURES
    CEI EN 61300-2-6 : 2012 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-6: TESTS - TENSILE STRENGTH OF COUPLING MECHANISM
    I.S. EN 61753-121-3:2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 121-3: SIMPLEX AND DUPLEX CORDS WITH SINGLE-MODE FIBRE AND CYLINDRICAL FERRULE CONNECTORS FOR CATEGORY U - UNCONTROLLED ENVIRONMENT
    PD IEC/TS 62661-2-1:2013 Optical backplanes. Product specification Optical backplane using optical fibre circuit boards and multi-core right angle optical connectors
    BS EN 60869-1:2013 Fibre optic interconnecting devices and passive components. Fibre optic passive power control devices Generic specification
    BS EN 61753-059-2:2013 Fibre optic interconnecting devices and passive components. Performance standard Single-mode fibre plug-receptacle style optical limiter for category C. Controlled environment
    16/30335717 DC : 0 BS EN 61300-2-55 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-55: TESTS - STRENGTH OF MOUNTED ADAPTOR
    07/30168298 DC : 0 BS EN 61300-2-48 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-48: TESTS - TEMPERATURE-HUMIDITY CYCLING
    12/30266214 DC : 0 ISO/IEC CD 14763-3 - IMPLEMENTATION AND OPERATION OF CPC - PART 3: TESTING OF OPTICAL FIBRE CABLING (2ND EDITION)
    BS EN 61300-3-15:2007 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Examinations and measurements. Dome eccentricity of a convex polished ferrule endface
    11/30247077 DC : 0 BS EN 61300-2-14 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-14: TESTS - OPTICAL POWER
    IEC PAS 61300-3-43:2006 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-43: Examinations and measurements - Mode transfer function measurement for fibre optic sources
    BS EN 61300-3-5:2001 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements Wavelength dependence of attenuation
    BS EN 61300-2-49:2007 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Tests. Connector installation test
    BS EN 62343-1-2:2015 Dynamic modules Performance standards. Tuneable chromatic dispersion compensator (non-connectorized)
    14/30311375 DC : 0 BS EN 61753-121-2 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 121-2: SIMPLEX AND DUPLEX CORDS WITH SINGLE-MODE FIBRE AND CYLINDRICAL FERRULE CONNECTORS FOR CATEGORY C - CONTROLLED ENVIRONMENT
    I.S. EN 61300-3-39:2012 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-39: EXAMINATIONS AND MEASUREMENTS - PHYSICAL CONTACT (PC) OPTICAL CONNECTOR REFERENCE PLUG SELECTION FOR RETURN LOSS MEASUREMENTS (IEC 61300-3-39:2011 (EQV))
    CEI EN 61300-3-37 : 2005 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-37: EXAMINATIONS AND MEASUREMENTS - ENDFACE ANGLE OF ANGLE-POLISHED OPTICAL FIBRES
    IEC 61300-2-12:2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-12: Tests - Impact
    CEI EN 61300-3-28 : 2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-28: EXAMINATIONS AND MEASUREMENTS - TRANSIENT LOSS
    BS EN 61300-2-48:2009 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Tests. Temperature-humidity cycling
    IEC 61300-3-35 REDLINE : 2ED 2015 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-35: EXAMINATIONS AND MEASUREMENTS - VISUAL INSPECTION OF FIBRE OPTIC CONNECTORS AND FIBRE-STUB TRANSCEIVERS
    CEI EN 50516-2-1 : 2012 INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-1: TYPE ODVA PC INDUSTRIAL TERMINATED ON EN 60793-2-10 CATEGORY A1A AND A1B MULTIMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY 1 (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN EN 50173-1 AND IEC 61753-1-3
    CEI EN 61300-2-9 : 2012 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-9: TESTS - SHOCK
    I.S. EN 62496-2-1:2011 OPTICAL CIRCUIT BOARDS - PART 2-1: MEASUREMENTS - OPTICAL ATTENUATION AND ISOLATION (IEC 62496-2-1:2011 (EQV))
    I.S. EN 62496-2:2017 OPTICAL CIRCUIT BOARDS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2: GENERAL GUIDANCE FOR DEFINITION OF MEASUREMENT CONDITIONS FOR OPTICAL CHARACTERISTICS OF OPTICAL CIRCUIT BOARDS
    I.S. EN 61300-2-49:2007 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-49: TESTS - CONNECTOR INSTALLATION TEST
    I.S. EN 61300-2-17:2011 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-17: TESTS - COLD
    I.S. EN 60869-1:2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC PASSIVE POWER CONTROL DEVICES - PART 1: GENERIC SPECIFICATION (IEC 60869-1:2012 (EQV))
    I.S. EN 61978-1:2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC PASSIVE CHROMATIC DISPERSION COMPENSATORS - PART 1: GENERIC SPECIFICATION
    I.S. EN 61753-058-2:2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 058-2: SINGLE MODE FIBRE PIGTAILED STYLE OPTICAL POWER LIMITER FOR CATEGORY C - CONTROLLED ENVIRONMENT (IEC 61753-058-2:2013 (EQV))
    CEI EN 61300-3-1 : 2006 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-1: EXAMINATIONS AND MEASUREMENTS - VISUAL EXAMINATION
    CEI EN 61753-111-8 : 2011 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 111-8: SEALED CLOSURES FOR CATEGORY G - GROUND
    I.S. EN 61300-3-26:2002 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - EXAMINATIONS AND MEASUREMENTS - MEASUREMENT OF THE ANGULAR MISALIGNMENT BETWEEN FIBRE AND FERRULES AXES
    IEC PAS 61753-1-3:2009 Fibre optic interconnecting devices and passive components performance standard - Part 1-3: General and guidance for performance standards - Single-mode fibre optic connector performance for harsh industrial operating conditions
    CEI EN 61753-101-2 : 2007 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 101-2: FIBRE MANAGEMENT SYSTEMS FOR CATEGORY C - CONTROLLED ENVIRONMENT
    CEI EN 61300-2-52 : 2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-52: TESTS - B ENDING TEST FOR CORDS
    I.S. EN 61300-2-44:2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-44: TESTS - FLEXING OF THE STRAIN RELIEF OF FIBRE OPTIC DEVICES (IEC 61300-2-44:2013 (EQV))
    I.S. EN 61300-3-42:2008 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-42: EXAMINATIONS AND MEASUREMENTS - ATTENUATION OF SINGLE MODE ALIGNMENT SLEEVES AND OR ADAPTORS WITH RESILIENT ALIGNMENT SLEEVES
    NF EN 61300-3-34 : 2004 FIBER OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-34: EXAMINATIONS AND MEASUREMENTS - ATTENUATION OF RANDOM MATED CONNECTORS
    NF EN 61300-2-48 : 2005 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-48: TESTS - TEMPERATURE-HUMIDITY CYCLING
    IEC 61300-3-4:2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-4: Examinations and measurements - Attenuation
    IEC 61300-3-37:2005 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-37: Examinations and measurements - Endface angle of angle-polished optical fibres
    IEC 61300-3-6:2008 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-6: Examinations and measurements - Return loss
    IEC 61300-2-22:2007 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-22: Tests - Change of temperature
    IEC 61978-1:2014 Fibre optic interconnecting devices and passive components - Fibre optic passive chromatic dispersion compensators - Part 1: Generic specification
    EN 61753-042-2:2014 Fibre optic interconnecting devices and passive components - Performance standard - Part 042-2: Plug-pigtail-style and plug-receptacle-style OTDR reflecting devices for category C - Controlled environments
    EN 61300-3-4:2013 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-4: Examinations and measurements - Attenuation
    CEI EN 61300-3-39 : 2012 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-39: EXAMINATIONS AND MEASUREMENTS - PHYSICAL CONTACT (PC) OPTICAL CONNECTOR REFERENCE PLUG SELECTION FOR RETURN LOSS MEASUREMENTS
    BS EN 61300-2-33:2012 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Tests. Assembly and disassembly of fibre optic mechanical splices, fibre management systems and closures
    CEI EN 61300-2-10 : 2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-10: TESTS - CRUSH RESISTANCE
    11/30248302 DC : 0 BS EN 61300-2-35 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-35: TESTS - CABLE NUTATION
    08/30171597 DC : DRAFT JUNE 2008 BS EN 61753-111-7 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 111-7: SEALED CLOSURES FOR CATEGORY A - AERIAL
    BS EN 61753-056-2:2013 Fibre optic interconnecting devices and passive components. Performance standard Single mode fibre pigtailed style optical fuse for category C. Controlled environment
    04/30110890 DC : DRAFT MAR 2004 IEC 61300-2-51 ED 1.0 - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-51: TESTS - FIBRE OPTIC CONNECTOR TEST FOR TRANSMISSION WITH APPLIED TENSILE LOAD - SINGLEMODE AND MULTIMODE
    11/30244353 DC : 0 BS EN 61753-123-2 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 123-2: SIMPLEX AND DUPLEX REFERENCE CORDS WITH SINGLE-MODE FIBRE AND CYLINDRICAL FERRULE CONNECTORS
    BS EN 61300-3-39:2012 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Examinations and measurements. Physical contact (PC) optical connector reference plug selection for return loss measurements
    13/30265394 DC : 0 BS EN 61300-3-51 ED 1.0 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-51: EXAMINATIONS AND MEASUREMENTS - GUIDE PIN WITHDRAWAL FORCE MEASUREMENT METHOD FOR RECTANGULAR FERRULE MULTI-FIBRE CONNECTORS
    BS EN 50377-17-2:2015 Connector sets and Interconnect components to be used in optical fibre communication systems. Product specifications Type FPFT (factory polished field terminated) simplex connector factory terminated with EN 60793-2-50 category B1.3 fibre and field mounted onto reinforced cable containing IEC 60793-2-50 category B1.3 or B6a1 or B6a 2 singlemode fibre (with restricted MFD), category C
    BS EN 61300-3-49:2013 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Examinations and measurements. Guide pin retention force for rectangular ferrule multi-fibre connectors
    BS EN 61753-131-3:2011 Fibre optic interconnecting devices and passive components. Performance standard Single-mode mechanical fibre splice for category U. Uncontrolled environment
    09/30189796 DC : 0 BS EN 61300-3-45 ED.1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-45: EXAMINATIONS AND MEASUREMENTS - ATTENUATION OF RANDOM MATED MULTI-FIBRE CONNECTORS
    EN 61300-2-10:2012 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-10: TESTS - CRUSH RESISTANCE (IEC 61300-2-10:2012)
    08/30180417 DC : DRAFT MAR 2008 BS EN 61300-2-23 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-23: TESTS - SEALING FOR NON-PRESSURIZED CLOSURES OF FIBRE OPTIC DEVICES
    BS EN 61300-2-50:2007 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Tests. Fibre optic connector proof test with static load. Singlemode and multimode
    BS EN 61753-111-9:2010 Fibre optic interconnecting devices and passive components performance standard Sealed closures for category S. Subterranean
    BS EN 62496-2:2017 Optical circuit boards. Basic test and measurement procedures General guidance for definition of measurement conditions for optical characteristics of optical circuit boards
    11/30249063 DC : 0 BS EN 61300-2-53 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-53: TEST - DEGREES OF PROTECTION PROVIDED BY FIBRE OPTIC ENCLOSURES (IP CODES 65 AND 67)
    NF EN 61753-101-3 : 2008 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 101-3: FIBRE MANAGEMENT SYSTEMS FOR CATEGORY U - UNCONTROLLED ENVIRONMENT
    I.S. EN 61753-101-3:2008 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 101-3: FIBRE MANAGEMENT SYSTEMS FOR CATEGORY U - UNCONTROLLED ENVIRONMENT
    BS EN 61300-3-31:2003 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements Coupled power ratio measurement for fibre optic sources
    CEI EN 61300-2-51 : 2008 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES -PART 2-51: TESTS - FIBRE OPTIC CONNECTOR TEST FOR TRANSMISSION WITH APPLIED TENSILE LOAD - SINGLEMODE AND MULTIMODE
    13/30287871 DC : 0 BS EN 61300-2-4 ED 2.0 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-4: TESTS - FIBRE/CABLE RETENTION
    BS EN 61300-2-6:2011 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Tests. Tensile strength of coupling mechanism
    04/30124031 DC : DRAFT OCT 2004 IEC 61300-3-35 ED 1.0 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-35: EXAMINATIONS AND MEASUREMENTS - FIBRE OPTIC CYLINDRICAL CONNECTOR ENDFACE VISUAL AND AUTOMATED INSPECTION
    BS EN 61753-042-2:2014 Fibre optic interconnecting devices and passive components. Performance standard Plug-pigtail-style and plug-receptacle-style OTDR reflecting devices for category C. Controlled environments
    07/30170096 DC : DRAFT AUG 2007 BS EN 61300-2-5 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-5: TESTS - TORSION/TWIST
    CEI EN 61300-2-2 : 2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-2: TESTS - MATING DURABILITY
    CEI EN 61753-056-2 : 2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 056-2: SINGLE MODE FIBRE PIGTAILED STYLE OPTICAL FUSE FOR CATEGORY C - CONTROLLED ENVIRONMENT
    05/30138957 DC : DRAFT SEP 2005 IEC 61300-2-34 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-34: TESTS - RESISTANCE TO SOLVENTS AND CONTAMINATING FLUIDS
    12/30259963 DC : 0 BS EN 61300-2-44 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST MEASUREMENT PROCEDURES - PART 2-44: TESTS - FLEXING OF THE STRAIN RELIEF OF FIBRE OPTIC DEVICES
    CEI EN 61300-3-6 : 2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-6: EXAMINATIONS AND MEASUREMENTS - RETURN LOSS
    CEI EN 61300-2-14 : 2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-14: TESTS - HIGH OPTICAL POWER
    CEI EN 61300-3-42 : 2008 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-42: EXAMINATIONS AND MEASUREMENTS - ATTENUATION OF SINGLE MODE ALIGNMENT SLEEVES AND OR ADAPTORS WITH RESILIENT ALIGNMENT SLEEVES
    07/30172982 DC : 0 BS EN 61300-3-3 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-3: EXAMINATIONS AND MEASUREMENTS - ACTIVE MONITORING OF CHANGES IN ATTENUATION AND RETURN LOSS
    CEI EN 61300-2-16 : 2007 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-16: TESTS - MOULD GROWTH
    BS EN 61753-058-2:2013 Fibre optic interconnecting devices and passive components. Performance standard Single mode fibre pigtailed style optical power limiter for category C. Controlled environment
    BS EN 61753-022-2:2013 Fibre optic interconnecting devices and passive components. Performance standard Fibre optic connectors terminated on multimode fibre for category C. Controlled environment
    04/30109842 DC : 0 IEC 61300-3-7 ED 2.0 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-7: EXAMINATIONS AND MEASUREMENTS - WAVELENGTH DEPENDENCE OF ATTENUATION AND RETURN LOSS
    02/204327 DC : DRAFT MAY 2002 IEC/PAS/61300-3-35. ED.1 - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-35: EXAMINATIONS AND MEASUREMENTS - FIBRE OPTIC CYLINDRICAL CONNECTOR ENDFACE VISUAL INSPECTION
    BS EN 61300-2-34:2009 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Tests. Resistance to solvents and contaminating fluids of interconnecting components and closures
    10/30240271 DC : 0 BS EN 61300-2-33 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-33: TESTS - ASSEMBLY AND DISASSEMBLY OF FIBRE OPTIC MECHANICAL SPLICES, FIBRE MANAGEMENT SYSTEMS AND CLOSURES
    12/30259968 DC : 0 BS EN 61300-2-42 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST MEASUREMENT PROCEDURES - PART 2-42: TESTS - STATIC SIDE LOAD FOR STRAIN RELIEF
    16/30325971 DC : 0 BS ISO/IEC 11801-1 - INFORMATION TECHNOLOGY - GENERIC CABLING FOR CUSTOMER PREMISES - PART 1: GENERAL REQUIREMENTS
    05/30127690 DC : DRAFT JAN 2005 IEC 61300-3-15 ED 2.0 - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-15: MEASUREMENTS - ECCENTRICITY OF A CONVEX POLISHED FERRULE ENDFACE
    BS EN 61300-3-4:2013 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Examinations and measurements. Attenuation
    07/30168187 DC : 0 BS EN 61300-2-5 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-5: TESTS - TORSION/TWIST
    BS EN 61300-2-12:2009 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Tests. Impact
    BS EN 61300-3-3:2009 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Examinations and measurements. Active monitoring of changes in attenuation and return loss
    BS EN 61300-3-43:2009 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Examinations and measurements. Mode transfer function measurement for fibre optic sources
    NF EN 61753-121-3 : 2011 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARDS - PART 121-3: SIMPLEX AND DUPLEX CORDS WITH SINGLE-MODE FIBRE AND CYLINDRICAL FERRULE CONNECTORS FOR CATEGORY U - UNCONTROLLED ENVIRONMENT
    IEC 61300-3-44:2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-44: Examinations and measurements - Fibre optic trancsceiver receptacle endface visual and automated inspection
    16/30256046 DC : 0 BS EN 62005-9-4 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - RELIABILITY - PART 9-4: HIGH POWER QUALIFICATION OF PASSIVE OPTICAL COMPONENTS FOR ENVIRONMENTAL CATEGORY C
    CEI EN 61753-058-2 : 2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 058-2: SINGLE MODE FIBRE PIGTAILED STYLE OPTICAL POWER LIMITER FOR CATEGORY C - CONTROLLED ENVIRONMENT
    CEI EN 61300-3-50 : 2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-50: EXAMINATIONS AND MEASUREMENTS - CROSSTALK FOR OPTICAL SPATIAL SWITCHES
    I.S. EN 61300-3-38:2012 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-38: EXAMINATIONS AND MEASUREMENTS - GROUP DELAY, CHROMATIC DISPERSION AND PHASE RIPPLE (IEC 61300-3-38:2012 (EQV))
    I.S. EN 50516-2-1:2011 INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-1: TYPE ODVA PC INDUSTRIAL TERMINATED ON EN 60793-2-10 CATEGORY A1A AND A1B MULTIMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY I (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN EN 50173-1 AND IEC 61753-1-3
    I.S. EN 61300-2-52:2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-52: TESTS - BENDING TEST FOR CORDS (IEC 61300-2-52:2013 (EQV))
    CEI EN 61753-022-2 : 2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 022-2: FIBRE OPTIC CONNECTORS TERMINATED ON MULTIMODE FIBRE FOR CATEGORY C - CONTROLLED ENVIRONMENT
    I.S. EN 61753-057-2:2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 057-2: SINGLE MODE FIBRE PLUG-RECEPTACLE STYLE OPTICAL FUSE FOR CATEGORY C - CONTROLLED ENVIRONMENT (IEC 61753-057-2:2012 (EQV))
    I.S. EN 61300-2-55:2017 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-55: TESTS - STRENGTH OF MOUNTED ADAPTOR
    I.S. EN 61300-3-6:2009 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-6: EXAMINATIONS AND MEASUREMENTS - RETURN LOSS
    I.S. EN 61300-3-33:2012 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-33: EXAMINATIONS AND MEASUREMENTS - WITHDRAWAL FORCE FROM A RESILIENT ALIGNMENT SLEEVE USING GAUGE PINS (IEC 61300-3-33:2012 (EQV))
    NF EN 61300-3-49 : 2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-49: EXAMINATIONS AND MEASUREMENTS - GUIDE PIN RETENTION FORCE FOR RECTANGULAR FERRULE MULTI-FIBRE CONNECTORS
    I.S. EN 62343-1-2:2015 DYNAMIC MODULES - PART 1-2: PERFORMANCE STANDARDS - TUNEABLE CHROMATIC DISPERSION COMPENSATOR (NON-CONNECTORIZED)
    I.S. EN 61753-059-2:2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 059-2: SINGLE-MODE FIBRE PLUG-RECEPTACLE STYLE OPTICAL LIMITER FOR CATEGORY C - CONTROLLED ENVIRONMENT (IEC 61753-059-2:2013 (EQV))
    I.S. EN 61753-042-2:2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 042-2: PLUG-PIGTAIL-STYLE AND PLUG-RECEPTACLE-STYLE OTDR REFLECTING DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENTS
    CEI EN 62496-2-1 : 2012 OPTICAL CIRCUIT BOARDS - PART 2-1: MEASUREMENTS - OPTICAL ATTENUATION AND ISOLATION
    BS EN 61300-2-42:2014 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Tests. Static side load for strain relief
    CEI EN 61753-111-7 : 2011 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 111-7: SEALED CLOSURES FOR CATEGORY A - AERIA
    CEI EN 61300-3-34 : 2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-34: EXAMINATIONS AND MEASUREMENTS - ATTENUATION OF RANDOM MATED CONNECTORS
    CEI EN 50411-3-2 : 2012 FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-2: SINGLEMODE MECHANICAL FIBRE SPLICE
    CEI EN 61300-2-11 : 2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-11: TESTS - AXIAL COMPRESSION
    I.S. EN 61300-2-51:2007 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-51: TESTS - FIBRE OPTIC CONNECTOR TEST FOR TRANSMISSION WITH APPLIED TENSILE LOAD - SINGLEMODE AND MULTIMODE
    I.S. EN 61300-2-33:2012 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-33: TESTS - ASSEMBLY AND DISASSEMBLY OF FIBRE OPTIC MECHANICAL SPLICES, FIBRE MANAGEMENT SYSTEMS AND CLOSURES (IEC 61300-2-33:2012 (EQV))
    I.S. EN 61753-121-2:2017 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARDS - PART 121-2: SIMPLEX AND DUPLEX CORDS WITH SINGLE-MODE FIBRE AND CYLINDRICAL FERRULE CONNECTORS FOR CATEGORY C - CONTROLLED ENVIRONMENT
    I.S. EN 61753-131-3:2011 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 131-3: SINGLE-MODE MECHANICAL FIBRE SPLICE FOR CATEGORY U - UNCONTROLLED ENVIRONMENT
    I.S. EN 61300-2-38:2006 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-38: TESTS - SEALING FOR PRESSURIZED FIBRE OPTIC CLOSURES
    I.S. EN 61300-3-28:2012 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-28: EXAMINATIONS AND MEASUREMENTS - TRANSIENT LOSS (IEC 61300-3-28:2012 (EQV))
    I.S. EN 61300-2-50:2007 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-50: TESTS - FIBRE OPTIC CONNECTOR PROOF TEST WITH STATIC LOAD - SINGLEMODE AND MULTIMODE
    I.S. EN 61300-2-28:2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-28: TESTS - INDUSTRIAL ATMOSPHERE (SULPHUR DIOXIDE) (IEC 61300-2-28:2013 (EQV))
    IEC 61300-2-1:2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-1: Tests - Vibration (sinusoidal)
    NF EN 61300-3-14 : 2007 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-14: EXAMINATIONS AND MEASUREMENTS - ACCURACY AND REPEATABILITY OF THE ATTENUATION SETTINGS OF A VARIABLE ATTENUATOR
    IEC 61300-3-15:2006 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-15: Examinations and measurements - Dome eccentricity of a convex polished ferrule endface
    IEC 61300-3-43:2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-43: Examinations and measurements - Mode transfer function measurement for fibre optic sources
    IEC 61300-2-34:2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-34: Tests - Resistance to solvents and contaminating fluids of interconnecting components and closures
    IEC 61753-101-2:2006 Fibre optic interconnecting devices and passive components performance standard - Part 101-2: Fibre management systems for Category C - Controlled environment
    IEC 61300-2-42:2014 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-42: Tests - Static side load for strain relief
    IEC 61753-382-2:2015 Fibre optic interconnecting devices and passive components - Performance standard - Part 382-2: Non-connectorized single-mode bidirectional G-PON-NGA WWDM devices for category C - Controlled environment
    IEC 61300-2-6:2010 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-6: Tests - Tensile strength of coupling mechanism
    IEC 61300-2-28:2013 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-28: Tests - Corrosive atmosphere (sulphur dioxide)
    IEC 60869-1:2012 Fibre optic interconnecting devices and passive components - Fibre optic passive power control devices - Part 1: Generic specification
    IEC 61300-3-45:2011 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-45: Examinations and measurements - Attenuation of random mated multi-fibre connectors
    IEC 61300-2-10:2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-10: Tests - Crush resistance
    IEC 62005-1:2001 Reliability of fibre optic interconnecting devices and passive components - Part 1: Introductory guide and definitions
    UNE-EN 61300-2-42:2015 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-42: Tests - Static side load for strain relief
    UNE-EN 61300-2-50:2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-50: Tests - Fibre optic connector proof test with static load - Singlemode and multimode
    IEC 61300-2-44:2013 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices
    UNE-EN 61300-2-6:2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-6: Tests - Tensile strength of coupling mechanism
    UNE-EN 61300-2-44:2013 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices
    IEC 61300-3-42:2007 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-42: Examinations and measurements - Attenuation of single mode alignment sleeves and or adaptors with resilient alignment sleeves
    IEC 61300-2-52:2013 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-52: Tests - Bending test for cords
    IEC 61300-2-39:1997 Fibre optic interconnecting devices and passive components - Basictest and measurement procedures - Part 2-39: Tests - Susceptibilityto external magnetic fields
    IEC 61300-3-14:2014 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-14: Examinations and measurements - Error and repeatability of the attenuation settings of a variable optical attenuator
    IEC 61300-2-51:2007 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-51: Tests - Fibre optic connector test for transmission with applied tensile load - Singlemode and multimode
    IEC 61753-056-2:2012 Fibre optic interconnecting devices and passive components - Performance standard - Part 056-2: Single mode fibre pigtailed style optical fuse for category C - Controlled environment
    IEC 60875-1:2015 Fibre optic interconnecting devices and passive components - Non-wavelength-selective fibre optic branching devices - Part 1: Generic specification
    UNE-EN 61300-2-5:2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-5: Tests - Torsion
    IEC 61753-058-2:2013 Fibre optic interconnecting devices and passive components - Performance standard - Part 058-2: Single mode fibre pigtailed style optical power limiter for category C - Controlled environment
    IEC 61753-111-9:2009 Fibre optic interconnecting devices and passive components performance standard - Part 111-9: Sealed closures for category S - Subterranean
    IEC 61300-2-17:2010 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-17: Tests - Cold
    IEC 61300-3-28:2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-28: Examinations and measurements - Transient loss
    IEC 62343-1-2:2015 Dynamic modules - Part 1-2: Performance standards - Tuneable chromatic dispersion compensator (non-connectorized)
    IEC 61300-3-1:2005 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-1: Examinations and measurements - Visual examination
    IEC 61753-022-2:2012 Fibre optic interconnecting devices and passive components - Performance standard - Part 022-2: Fibre optic connectors terminated on multimode fibre for category C - Controlled environment
    IEC 61300-3-49:2013 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-49: Examinations and measurements - Guide pin retention force for rectangular ferrule multi-fibre connectors
    IEC 61300-3-38:2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-38: Examinations and measurements - Group delay, chromatic dispersion and phase ripple
    IEC 61753-111-8:2009 Fibre optic interconnecting devices and passive components performance standard - Part 111-8: Sealed closures for category G - Ground
    IEC 61300-3-34:2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-34: Examinations and measurements - Attenuation of random mated connectors
    IEC 61300-3-39:2011 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-39: Examinations and measurements - Physical contact (PC) optical connector reference plug selection for return loss measurements
    IEC 61753-2-3:2001 Fibre optic interconnecting devices and passive components performance standard - Part 2-3: Non-connectorised single-mode 1xN and 2xN non-wavelength-selective branching devices for Category U - Uncontrolled environment
    IEC 61300-3-33:2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-33: Examinations and measurements - Withdrawal force from a resilient alignment sleeve using gauge pins
    IEC 61300-2-49:2007 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-49: Tests - Connector installation test
    IEC 62496-2-1:2011 Optical circuit boards - Part 2-1: Measurements - Optical attenuation and isolation
    IEC 61300-3-3:2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-3: Examinations and measurements - Active monitoring of changes in attenuation and return loss
    IEC 61300-2-37:2016 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-37: Tests - Cable bending for fibre optic closures
    IEC 61300-3-21:2014 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-21: Examinations and measurements - Switching time
    IEC 61753-057-2:2012 Fibre optic interconnecting devices and passive components - Performance standard - Part 057-2: Single mode fibre plug-receptacle style optical fuse for category C - Controlled environment
    IEC 61300-2-18:2005 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-18: Tests - Dry heat - High temperature endurance
    IEC 61300-2-23:2010 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-23: Tests - Sealing for non-pressurized closures of fibre optic devices
    IEC 61753-131-3:2010 Fibre optic interconnecting devices and passive components - Performance standard - Part 131-3: Single-mode mechanical fibre splice for category U - Uncontrolled environment
    UNE-EN 61300-2-23:2011 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-23: Tests - Sealing for non-pressurized closures of fibre optic devices
    IEC 61300-3-31:2003 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-31: Examinations and measurements - Coupled power ratio measurement for fibre optic sources
    IEC 61300-2-26:2006 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-26: Tests - Salt mist
    IEC 61753-041-2:2014 Fibre optic interconnecting devices and passive components - Performance standard - Part 041-2: Non-connectorized single-mode OTDR reflecting device for category C - Controlled environment
    IEC 61300-2-16:2006 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-16: Tests - Mould growth
    IEC 61300-2-48:2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-48: Tests - Temperature-humidity cycling
    UNE-EN 61300-3-4:2014 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-4: Examinations and measurements - Attenuation
    IEC 61300-3-5:2000 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-5: Examinations and measurements - Wavelength dependence of attenuation
    IEC 61753-111-7:2009 Fibre optic interconnecting devices and passive components performance standard - Part 111-7: Sealed closures for category A - Aerial
    UNE-EN 61300-2-17:2011 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-17: Tests - Cold
    IEC 61300-3-35:2015 RLV Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-35: Examinations and measurements - Visual inspection of fibre optic connectors and fibre-stub transceivers
    IEC 61300-2-43:2014 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-43: Tests - Screen testing of return loss of single-mode PC optical fibre connectors
    IEC 61300-2-21:2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-21: Tests - Composite temperature/humidity cyclic test
    UNE-EN 61300-2-11:2013 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-11: Tests - Axial compression
    EN 61300-3-49:2013 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-49: Examinations and measurements - Guide pin retention force for rectangular ferrule multi-fibre connectors
    EN 61300-2-34:2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-34: Tests - Resistance to solvents and contaminating fluids of interconnecting components and closures
    EN 61300-2-50:2007/AC:2015 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-50: TESTS - FIBRE OPTIC CONNECTOR PROOF TEST WITH STATIC LOAD - SINGLEMODE AND MULTIMODE (IEC 61300-2-50:2007)
    CEI EN 61300-3-15 : 2007 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-15: EXAMINATIONS AND MEASUREMENTS - DOME ECCENTRICITY OF A CONVEX POLISHED FERRULE ENDFACE
    CEI EN 61753-111-9 : 2011 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 111-9: SEALED CLOSURES FOR CATEGORY S - SUBTERRANEAN
    BS EN 61300-3-53:2015 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Examinations and measurements. Encircled angular flux (EAF) measurement method based on two-dimensional far field data from step index multimode waveguide (including fibre)
    CEI EN 61300-3-38 : 2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-38: EXAMINATIONS AND MEASUREMENTS - GROUP DELAY, CHROMATIC DISPERSION AND PHASE RIPPLE
    11/30248703 DC : 0 BS EN 61753-1-3 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 1-3: GENERAL AND GUIDANCE FOR SINGLE-MODE FIBRE OPTIC CONNECTOR AND ASSEMBLY FOR HARSH INDUSTRIAL ENVIRONMENT, CATEGORY I
    I.S. EN 50377-17-2:2015 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 17-2: TYPE FPFT (FACTORY POLISHED FIELD TERMINATED) SIMPLEX CONNECTOR FACTORY TERMINATED WITH EN 60793-2-50 CATEGORY B1.3 FIBRE AND FIELD MOUNTED ONTO REINFORCED CABLE CONTAINING IEC 60793-2-50 CATEGORY B1.3 OR B6A1 OR B6A2 SINGLEMODE FIBRE
    BS EN 61300-2-4:1997 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests Fibre/cable retention
    CEI EN 61300-2-28 : 2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-28: TESTS - INDUSTRIAL ATMOSPHERE (SULPHUR DIOXIDE)
    10/30217980 DC : 0 BS EN 61753-122-2 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARDS - PART 122-2: SIMPLEX AND DUPLEX CORDS WITH MULTIMODE FIBRE AND CYLINDRICAL FERRULE CONNECTORS FOR CATEGORY C - CONTROLLED ENVIRONMENT
    09/30204275 DC : DRAFT MAY 2009 BS EN 61300-2-17 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-17: TESTS - COLD
    BS EN 61300-2-44:2013 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Tests. Flexing of the strain relief of fibre optic devices
    10/30218225 DC : 0 BS EN 60874-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - CONNECTORS FOR OPTICAL FIBRES AND CABLES - PART 1: GENERIC SPECIFICATION
    04/30118838 DC : DRAFT AUG 2004 IEC 61300-3-42 - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-42: EXAMINATIONS AND MEASUREMENTS - ATTENUATION OF SINGLE MODE ALIGNMENT SLEEVES/ADAPTORS
    BS EN 61300-2-28:2013 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Tests. Corrosive atmosphere (sulphur dioxide)
    11/30247511 DC : 0 BS EN 61753-124-2 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PART 124-2: SIMPLEX AND DUPLEX REFERENCE CORDS WITH MULTIMODE FIBRE AND CYLINDRICAL FERRULE CONNECTORS FOR CATEGORY C - CONTROLLED ENVIRONMENT
    BS EN 61073-1:2009 Fibre optic interconnecting devices and Passive components. Mechanical splices and fusion splice protectors for optical fibres and cables Generic specification
    09/30212946 DC : 0 BS EN 61300-2-10 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENT - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-10: TESTS - CRUSH RESISTANCE
    10/30218213 DC : 0 BS EN 61274-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - ADAPTORS FOR FIBRE OPTIC CONNECTORS - PART 1: GENERIC SPECIFICATION
    08/30193706 DC : 0 BS EN 61300-2-47 ED.3.0 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-47: TESTS - THERMAL SHOCKS
    BS EN 61753-111-8:2010 Fibre optic interconnecting devices and passive components performance standard Sealed closures for category G. Ground
    BS EN 61300-2-37:2007 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Tests. Cable bending for fibre optic closures
    BS EN 61300-3-33:2012 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Examinations and measurements. Withdrawal force from a resilient alignment sleeve using gauge pins
    10/30227056 DC : 0 BS EN 61753-022-2 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 022-2: FIBRE OPTIC CONNECTORS TERMINATED ON MULTIMODE FIBRE FOR CATEGORY C - CONTROLLED ENVIRONMENT
    10/30228868 DC : 0 BS EN 61300-2-28 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-28: TESTS - INDUSTRIAL ATMOSPHERE (SULPHUR DIOXIDE)
    07/30172543 DC : 0 BS EN 61300-2-12 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-12: TESTS - IMPACT
    07/30147214 DC : 0 EN 61300-3-43 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-43: EXAMINATIONS AND MEASUREMENTS - MODAL DISTRIBUTION MEASUREMENT FOR FIBRE OPTIC SOURCES
    CEI EN 61300-2-37 : 2007 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-37: TESTS - CABLE BENDING FOR FIBRE OPTIC CLOSURES
    17/30315248 DC : 0 BS EN 62496-2 ED 1.0 - OPTICAL CIRCUIT BOARDS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2: GENERAL GUIDANCE FOR DEFINITION OF MEASUREMENT CONDITIONS FOR OPTICAL CHARACTERISTICS OF OPTICAL CIRCUIT BOARDS
    BS EN 61300-2-11:2013 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Tests. Axial compression
    07/30168596 DC : 0 BS EN 61753-131-3 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 131-3: SINGLE MODE MECHANICAL FIBRE SPLICE FOR CATEGORY U - UNCONTROLLED ENVIRONMENT
    BS EN 61753-121-3:2010 Fibre optic interconnecting devices and passive components. Performance standard Simplex and duplex cords with single-mode fibre and cylindrical ferrule connectors for category U. Uncontrolled environment
    12/30272492 DC : 0 BS EN 61300-2-43 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-43: TESTS - SCREEN TESTING OF RETURN LOSS OF SINGLE MODE PC OPTION FIBRE CONNECTORS
    07/30172547 DC : 0 BS EN 62074-1 - FIBRE OPTIC WDM DEVICES - PART 1: GENERIC SPECIFICATION
    BS EN 61300-2-17:2003 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests Cold
    04/30125584 DC : DRAFT NOV 2004 IEC 61274-1 ED 2 - ADAPTORS FOR OPTICAL FIBRES AND CABLES - PART 2: GENERIC SPECIFICATION
    CEI EN 61300-2-31 : 1997 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-31: TESTS - NUCLEAR RADIATION
    BS EN 61300-3-42:2008 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Examinations and measurements. Attenuation of single mode alignment sleeves and or adaptors with resilient alignment sleeves
    I.S. EN 61300-2-21:2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-21: TESTS - COMPOSITE TEMPERATURE/HUMIDITY CYCLIC TEST
    BS EN 61300-2-2:2008 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Tests. Mating durability
    01/205318 DC : DRAFT AUG 2001 IEC 61300-3-37 - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-37: EXAMINATIONS AND MEASUREMENTS - ENDFACE ANGLE OF ANGLE-POLISHED OPTICAL FIBRES
    04/30110880 DC : DRAFT MAR 2004 IEC 61300-2-50 ED 1.0 - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-50: TESTS - FIBRE OPTIC CONNECTOR PROOF TEST - SINGLEMODE AND MULTIMODE
    BS EN 61300-3-1:2005 Fire optic interconnecting devices and passive components. Basic test and measurement procedures Examinations and measurements - Visual examination
    CEI EN 50377-17-1 : 2013 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 17-1: TYPE FPFT (FACTORY POLISHED FIELD TERMINATED) SIMPLEX CONNECTOR FACTORY TERMINATED WITH EN 60793-2-50 CATEGORY B1.3 FIBRE AND FIELD MOUNTED ONTO IEC 60793-2-50 CATEGORY B1.3 OR B6A1 OR B6A2 SINGLEMODE FIBRE, CATEGORY C
    07/30172987 DC : 0 BS EN 61300-3-6 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-6: EXAMINATIONS AND MEASUREMENTS - RETURN LOSS
    I.S. EN 61300-2-43:2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-43: TESTS - SCREEN TESTING OF RETURN LOSS OF SINGLE-MODE PC OPTICAL FIBRE CONNECTORS
    IEC 61753-121-2:2017 Fibre optic interconnecting devices and passive components - Performance standard - Part 121-2: Simplex and duplex cords with single-mode fibre and cylindrical ferrule connectors for category C - Controlled environment
    CEI EN 61300-3-3 : 2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-3: EXAMINATIONS AND MEASUREMENTS - ACTIVE MONITORING OF CHANGES IN ATTENUATION AND RETURN LOSS
    I.S. EN 61300-2-23:2011 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-23: TESTS - SEALING FOR NON-PRESSURIZED CLOSURES OF FIBRE OPTIC DEVICES
    I.S. EN 61300-2-18:2005 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-18: TESTS - DRY HEAT - HIGH TEMPERATURE ENDURANCE
    I.S. EN 61300-2-37:2016 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-37: TESTS - CABLE BENDING FOR FIBRE OPTIC CLOSURES
    I.S. EN 61300-3-50:2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-50: EXAMINATIONS AND MEASUREMENTS - CROSSTALK FOR OPTICAL SPATIAL SWITCHES (IEC 61300-3-50:2013 (EQV))
    I.S. EN 61753-101-2:2006 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 101-2: FIBRE MANAGEMENT SYSTEMS FOR CATEGORY C - CONTROLLED ENVIRONMENT
    I.S. EN 61300-3-21:2015 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-21: EXAMINATIONS AND MEASUREMENTS - SWITCHING TIME
    I.S. EN 50377-17-1:2013 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 17-1: TYPE FPFT (FACTORY POLISHED FIELD TERMINATED) SIMPLEX CONNECTOR FACTORY TERMINATED WITH EN 60793-2-50 CATEGORY B1.3 FIBRE AND FIELD MOUNTED ONTO IEC 60793-2-50 CATEGORY B1.3 OR B6A1 OR B6A2 SINGLEMODE FIBRE, CATEGORY C
    CEI EN 61300-2-49 : 2008 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-49: TESTS - CONNECTOR INSTALLATION TEST
    I.S. EN 61300-3-3:2009 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-3: EXAMINATIONS AND MEASUREMENTS - ACTIVE MONITORING OF CHANGES IN ATTENUATION AND RETURN LOSS
    I.S. EN 61300-2-34:2009 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-34: TESTS - RESISTANCE TO SOLVENTS AND CONTAMINATING FLUIDS OF INTERCONNECTING COMPONENTS AND CLOSURES
    CEI EN 61300-2-42 : 2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-42: TESTS - STATIC SIDE LOAD FOR STRAIN RELIEF
    I.S. EN 61300-2-48:2009 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-48: TESTS - TEMPERATURE-HUMIDITY CYCLING
    I.S. EN 61300-3-15:2007 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-15: EXAMINATIONS AND MEASUREMENTS - DOME ECCENTRICITY OF A CONVEX POLISHED FERRULE ENDFACE
    I.S. EN 61300-3-34:2009 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-34: EXAMINATIONS AND MEASUREMENTS - ATTENUATION OF RANDOM MATED CONNECTORS
    I.S. EN 61300-3-35:2015 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-35: EXAMINATIONS AND MEASUREMENTS - VISUAL INSPECTION OF FIBRE OPTIC CONNECTORS AND FIBRE-STUB TRANSCEIVERS
    CEI EN 61753-059-2 : 2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 059-2: SINGLE-MODE FIBRE PLUG-RECEPTACLE STYLE OPTICAL LIMITER FOR CATEGORY C - CONTROLLED ENVIRONMENT
    I.S. EN 61753-382-2:2016 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 382-2: NON-CONNECTORIZED SINGLE-MODE BIDIRECTIONAL G-PON-NGA WWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT
    I.S. EN 61300-3-14:2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-14: EXAMINATIONS AND MEASUREMENTS - ERROR AND REPEATABILITY OF THE ATTENUATION SETTINGS OF A VARIABLE OPTICAL ATTENUATOR
    ISO/IEC 11801-1:2017 Information technology — Generic cabling for customer premises — Part 1: General requirements
    BS EN 61300-3-14:2014 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Examinations and measurements. Error and repeatability of the attenuation settings of a variable optical attenuator
    I.S. EN 61300-3-1:2006 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-1: EXAMINATIONS AND MEASUREMENTS - VISUAL EXAMINATION
    CEI EN 61300-3-43 : 2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-43: EXAMINATIONS AND MEASUREMENTS - MODE TRANSFER FUNCTION MEASUREMENT FOR FIBRE OPTIC SOURCES
    CEI EN 62343-1-2 : 2016 DYNAMIC MODULES - PART 1-2: PERFORMANCE STANDARDS - TUNEABLE CHROMATIC DISPERSION COMPENSATOR (NON-CONNECTORIZED)
    CEI EN 61300-2-5 : 2012 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-5: TESTS - TORSION
    I.S. EN 61300-2-14:2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-14: TESTS - HIGH OPTICAL POWER (IEC 61300-2-14:2012 (EQV))
    I.S. EN 61300-2-11:2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-11: TESTS - AXIAL COMPRESSION (IEC 61300-2-11:2012 (EQV))
    I.S. EN 61300-2-12:2009 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-12: TESTS - IMPACT
    I.S. EN 61300-2-26:2007 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-26: TESTS - SALT MIST
    EN 61300-3-50:2013/AC:2015 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-50: EXAMINATIONS AND MEASUREMENTS - CROSSTALK FOR OPTICAL SPATIAL SWITCHES (IEC 61300-3-50:2013)
    EN 50516-1-1:2011/AC:2012 INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 1-1: TYPE SC-RJ PC INDUSTRIAL TERMINATED ON EN 60793-2-10 CATEGORY A1A AND A1B MULTIMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY I (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN IEC 61753-1-3
    IEC 61300-2-33:2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-33: Tests - Assembly and disassembly of fibre optic mechanical splices, fibre management systems and closures
    IEC 61073-1:2009 Fibre optic interconnecting devices and passive components - Mechanical splices and fusion splice protectors for optical fibres and cables - Part 1: Generic specification
    IEC 61753-101-3:2006 Fibre optic interconnecting devices and passive components performance standard - Part 101-3: Fibre management systems for Category U - Uncontrolled environment
    IEC 61300-2-5:2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-5: Tests - Torsion
    IEC 61300-2-9:2017 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-9: Tests - Shock
    IEC 61300-3-26:2002 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-26: Examinations and measurements - Measurement of the angular misalignment between fibre and ferrule axes
    IEC 61753-059-2:2013 Fibre optic interconnecting devices and passive components - Performance standard - Part 059-2: Single-mode fibre plug-receptacle style optical limiter for category C - Controlled environment
    IEC 61753-121-3:2010 Fibre optic interconnecting devices and passive components - Performance standard - Part 121-3: Simplex and duplex cords with single-mode fibre and cylindrical ferrule connectors for category U - Uncontrolled environment
    IEC 61300-2-14:2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-14: Tests - High optical power
    EN 61300-2-43:2014 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-43: Tests - Screen testing of return loss of single-mode PC optical fibre connectors
    EN 61753-121-3 : 2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 121-3: SIMPLEX AND DUPLEX CORDS WITH SINGLE-MODE FIBRE AND CYLINDRICAL FERRULE CONNECTORS FOR CATEGORY U - UNCONTROLLED ENVIRONMENT
    EN 61300-2-16 : 2006 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-16: TESTS - MOULD GROWTH
    EN 61300-2-23:2011 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-23: Tests - Sealing for non-pressurized closures of fibre optic devices
    EN 61300-2-14:2013 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-14: Tests - High optical power
    EN 61978-1:2014 Fibre optic interconnecting devices and passive components - Fibre optic passive chromatic dispersion compensators - Part 1: Generic specification
    EN 60875-1:2015 Fibre optic interconnecting devices and passive components - Non-wavelength-selective fibre optic branching devices - Part 1: Generic specification
    EN 61300-3-26:2002 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-26: Examinations and measurements - Measurement of the angular misalignment between fibre and ferrule axes
    NF EN 61300-2-4 : 1997 FIBER OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-4: TESTS - FIBER/CABLE RETENTION
    EN 61300-3-35:2015 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-35: Examinations and measurements - Visual inspection of fibre optic connectors and fibre-stub transceivers
    EN 61300-2-21:2010 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-21: Tests - Composite temperature/humidity cyclic test
    EN 62496-2-1:2011 Optical circuit boards - Part 2-1: Measurements - Optical attenuation and isolation
    EN 61300-2-37:2016 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-37: Tests - Cable bending for fibre optic closures
    EN 61300-2-42:2014 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-42: Tests - Static side load for strain relief
    EN 61300-2-17:2011 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-17: Tests - Cold
    EN 61300-2-51:2007/AC:2015 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-51: TESTS - FIBRE OPTIC CONNECTOR TEST FOR TRANSMISSION WITH APPLIED TENSILE LOAD - SINGLEMODE AND MULTIMODE
    EN 61753-101-2 : 2006 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 101-2: FIBRE MANAGEMENT SYSTEMS FOR CATEGORY C - CONTROLLED ENVIRONMENT
    EN 61300-3-33:2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-33: Examinations and measurements - Withdrawal force from a resilient alignment sleeve using gauge pins
    EN 61300-3-21:2015 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-21: Examinations and measurements - Switching time
    EN 60869-1:2013 Fibre optic interconnecting devices and passive components - Fibre optic passive power control devices - Part 1: Generic specification
    EN 61300-2-44:2013 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices
    EN 61300-2-28:2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-28: TESTS - INDUSTRIAL ATMOSPHERE (SULPHUR DIOXIDE)
    EN 61300-3-6:2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-6: Examinations and measurements - Return loss
    EN 61300-3-34:2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-34: Examinations and measurements - Attenuation of random mated connectors
    EN 50377-17-1 : 2013 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 17-1: TYPE FPFT (FACTORY POLISHED FIELD TERMINATED) SIMPLEX CONNECTOR FACTORY TERMINATED WITH EN 60793-2-50 CATEGORY B1.3 FIBRE AND FIELD MOUNTED ONTO IEC 60793-2-50 CATEGORY B1.3 OR B6A1 OR B6A2 SINGLEMODE FIBRE, CATEGORY C
    EN 61753-1-1:2001 Fibre optic interconnecting devices and passive components performance standard - Part 1-1: General and guidance - Interconnecting devices (connectors)
    EN 62005-1:2001 Reliability of fibre optic interconnecting devices and passive components - Part 1: Introductory guide and definitions
    EN 61753-058-2:2013 Fibre optic interconnecting devices and passive components - Performance standard - Part 058-2: Single mode fibre pigtailed style optical power limiter for category C - Controlled environment
    EN 61300-2-12:2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-12: Tests - Impact
    EN 61300-2-48:2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-48: Tests - Temperature-humidity cycling
    EN 61073-1:2009 Fibre optic interconnecting devices and passive components - Mechanical splices and fusion splice protectors for optical fibres and cables - Part 1: Generic specification
    EN 50411-3-3 : 2011 FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-3: SINGLEMODE OPTICAL FIBRE FUSION SPLICE PROTECTORS
    EN 61300-3-42:2008 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-42: Examinations and measurements - Attenuation of single mode alignment sleeves and or adaptors with resilient alignment sleeves
    EN 61300-2-5:2011 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-5: Tests - Torsion
    EN 61753-041-2:2014 Fibre optic interconnecting devices and passive components - Performance standard - Part 041-2: Non-connectorized single-mode OTDR reflecting device for category C - Controlled environment
    EN 61300-2-52:2013 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-52: Tests - Bending test for cords
    EN 61300-3-3:2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-3: Examinations and measurements - Active monitoring of changes in attenuation and return loss

    Standards Referencing This Book - (Show below) - (Hide below)

    IEC 60825-2:2004+AMD1:2006+AMD2:2010 CSV Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS)
    IEC TR 62614-2:2015 Fibre optics - Multimode launch conditions - Part 2: Determination of launch condition requirements for measuring multimode attenuation
    IEC 60050-731:1991 International Electrotechnical Vocabulary (IEV) - Part 731: Optical fibre communication
    IEC 60793-2-10:2017 Optical fibres - Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres
    IEC 60793-2-30:2015 Optical fibres - Part 2-30: Product specifications - Sectional specification for category A3 multimode fibres
    IEC 60793-2-40:2015 Optical fibres - Part 2-40: Product specifications - Sectional specification for category A4 multimode fibres
    IEC 60825-1:2014 Safety of laser products - Part 1: Equipment classification and requirements
    IEC 61280-4-1:2009 Fibre-optic communication subsystem test procedures - Part 4-1: Installed cable plant - Multimode attenuation measurement
    IEC 61300-3-35:2015 RLV Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-35: Examinations and measurements - Visual inspection of fibre optic connectors and fibre-stub transceivers
    IEC 61315:2005 Calibration of fibre-optic power meters
    IEC 60068-2-1:2007 Environmental testing - Part 2-1: Tests - Test A: Cold
    IEC 62614:2010 Fibre optics - Launch condition requirements for measuring multimode attenuation
    IEC 61300-3-1:2005 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-1: Examinations and measurements - Visual examination
    IEC 61280-1-4:2009 Fibre optic communication subsystem test procedures - Part 1-4: General communication subsystems - Light source encircled flux measurement method
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective