• IEC 61709 : 3.0

    Current The latest, up-to-date edition.

    ELECTRIC COMPONENTS - RELIABILITY - REFERENCE CONDITIONS FOR FAILURE RATES AND STRESS MODELS FOR CONVERSION

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s):  English - French

    Published date:  17-02-2017

    Publisher:  International Electrotechnical Committee

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    FOREWORD
    INTRODUCTION
    1 Scope
    2 Normative references
    3 Terms, definitions and symbols
    4 Context and conditions
    5 Generic reference conditions and stress models
    6 Integrated semiconductor circuits
    7 Discrete semiconductors
    8 Optoelectronic components
    9 Capacitors
    10 Resistors and resistor networks
    11 Inductors, transformers and coils
    12 Microwave devices
    13 Other passive components
    14 Electrical connections
    15 Connectors and sockets
    16 Relays
    17 Switches and push-buttons
    18 Signal and pilot lamps
    19 Printed circuit boards (PCB)
    20 Hybrid circuits
    Annex A (normative) - Failure modes of components
    Annex B (informative) - Thermal model for
            semiconductors
    Annex C (informative) - Failure rate prediction
    Annex D (informative) - Considerations on mission
            profile
    Annex E (informative) - Useful life models
    Annex F (informative) - Physics of failure
    Annex G (informative) - Considerations for the design
            of a data base on failure rates
    Annex H (informative) - Potential sources of failure
            rate data and methods of selection
    Annex I (informative) - Overview of component
            classification
    Annex J (informative) - Presentation of component
            reliability data
    Annex K (informative) - Examples
    Bibliography

    Abstract - (Show below) - (Hide below)

    Provides guidance on the use of failure rate data for reliability prediction of electric components used in equipment.

    General Product Information - (Show below) - (Hide below)

    Committee TC 56
    Development Note Supersedes IEC 60863. (06/2004) Supersedes and incorporates IEC TR 62380. Stability Date: 2020. (02/2017) NEW CHILD COR 1 IS NOW ADDED
    Document Type Standard
    Product Note NEW CHILD COR 1 IS NOW ADDED
    Publisher International Electrotechnical Committee
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    BS IEC 61163-2:1998 RELIABILITY STRESS SCREENING - ELECTRONIC COMPONENTS
    15/30324519 DC : 0 BS EN ISO 14224 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COLLECTION AND EXCHANGE OF RELIABILITY AND MAINTENANCE DATA FOR EQUIPMENT
    13/30279642 DC : 0 BS EN 61811-1 - ELECTROMECHANICAL ALL-OR-NOTHING TELECOM RELAYS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION AND BLANK DETAIL SPECIFICATION
    I.S. EN 62506:2013 METHODS FOR PRODUCT ACCELERATED TESTING (IEC 62506:2013 (EQV))
    BS EN 50090-2-3:2005 HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 2-3: SYSTEM OVERVIEW - GENERAL FUNCTIONAL SAFETY REQUIREMENTS FOR PRODUCTS INTENDED TO BE INTEGRATED IN HBES
    02/209130 DC : DRAFT JAN 2003 IEC 61811-10 ED.1 - ELECTROMECHANICAL ELEMENTARY RELAYS OF ASSESSED QUALITY - PART 10: SECTIONAL SPECIFICATION - RELAYS FOR INDUSTRIAL APPLICATION
    15/30299852 DC : 0 BS EN 62550 - SPARE PARTS PROVISIONING
    IEC 62550:2017 Spare parts provisioning
    CEI EN 60300-3-2 : 2006 DEPENDABILITY MANAGEMENT - PART 3-2: APPLICATION GUIDE - COLLECTION OF DEPENDABILITY DATA FROM THE FIELD
    CEI EN 50495 : 2011 SAFETY DEVICES REQUIRED FOR THE SAFE FUNCTIONING OF EQUIPMENT WITH RESPECT TO EXPLOSION RISKS
    I.S. EN 61811-51:2002 ELECTROMECHANICAL ALL-OR-NOTHING RELAYS - PART 51: BLANK DETAIL SPECIFICATION - ELECTROMECHANICAL ALL-OR-NOTHING TELECOM RELAYS OF ASSESSED QUALITY - NON-STANDARDIZED TYPES AND CONSTRUCTION
    CEI EN 62308 : 2010 EQUIPMENT RELIABILITY - RELIABILITY ASSESSMENT METHODS
    EN 50126-1:2017 Railway Applications - The Specification and Demonstration of Reliability, Availability, Maintainability and Safety (RAMS) - Part 1: Generic RAMS Process
    NF EN 62059-41 : 2006 ELECTRICITY METERING EQUIPMENT - DEPENDABILITY - PART 41: RELIABILITY PREDICTION
    I.S. EN 60300-3-15:2009 DEPENDABILITY MANAGEMENT - PART 3-15: APPLICATION GUIDE - ENGINEERING OF SYSTEM DEPENDABILITY
    IEC 61069-5:2016 Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 5: Assessment of system dependability
    EN 61811-51 : 2002 ELECTROMECHANICAL ALL-OR-NOTHING RELAYS - PART 51: BLANK DETAIL SPECIFICATION - ELECTROMECHANICAL ALL-OR-NOTHING TELECOM RELAYS OF ASSESSED QUALITY - NON-STANDARDIZED TYPES AND CONSTRUCTION
    EN 61811-10 : 2003 ELECTROMECHANICAL ELEMENTARY RELAYS OF ASSESSED QUALITY - PART 10: SECTIONAL SPECIFICATION - RELAYS FOR INDUSTRIAL APPLICATION
    EN 62506 : 2013 METHODS FOR PRODUCT ACCELERATED TESTING (IEC 62506:2013)
    EN 60300-3-15 : 2009 DEPENDABILITY MANAGEMENT - PART 3-15: APPLICATION GUIDE - ENGINEERING OF SYSTEM DEPENDABILITY
    EN 60300-3-2 : 2005 Dependability management - Part 3-2: Application guide - Collection of dependability data from the field
    EN 60300-3-4 : 2008 DEPENDABILITY MANAGEMENT - PART 3-4: APPLICATION GUIDE - GUIDE TO THE SPECIFICATION OF DEPENDABILITY REQUIREMENTS
    EN 61811-54 : 2002 ELECTROMECHANICAL ALL-OR-NOTHING RELAYS - PART 54: BLANK DETAIL SPECIFICATION - ELECTROMECHANICAL ALL-OR-NOTHING TELECOM RELAYS OF ASSESSED QUALITY - TWO CHANGE-OVER CONTACTS, 15 MM X 7,5 MM BASE
    EN 61557-15 : 2014 ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 15: FUNCTIONAL SAFETY REQUIREMENTS FOR INSULATION MONITORING DEVICES IN IT SYSTEMS AND EQUIPMENT FOR INSULATION FAULT LOCATION IN IT SYSTEMS (IEC 61557-15:2014)
    EN 62308 : 2006 EQUIPMENT RELIABILITY - RELIABILITY ASSESSMENT METHODS
    EN 50495 : 2010 SAFETY DEVICES REQUIRED FOR THE SAFE FUNCTIONING OF EQUIPMENT WITH RESPECT TO EXPLOSION RISKS
    I.S. EN 62676-1-2:2014 VIDEO SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 1-2: SYSTEM REQUIREMENTS - PERFORMANCE REQUIREMENTS FOR VIDEO TRANSMISSION
    I.S. EN 62550:2017 SPARE PARTS PROVISIONING
    BS IEC 60300-3-1 : 2003 AMD 15370 DEPENDABILITY MANAGEMENT - APPLICATION GUIDE - ANALYSIS TECHNIQUES FOR DEPENDABILITY - GUIDE ON METHODOLOGY
    UNE-EN 60300-3-15:2013 Dependability management -- Part 3-15: Application guide - Engineering of system dependability
    ISO 26262-10:2012 Road vehicles Functional safety Part 10: Guideline on ISO 26262
    BS EN 61069-5:2016 Industrial-process measurement, control and automation. Evaluation of system properties for the purpose of system assessment Assessment of system dependability
    BS EN 61811-10:2003 ELECTROMECHANICAL ELEMENTARY RELAYS OF ASSESSED QUALITY - PART 10: SECTIONAL SPECIFICATION - RELAYS FOR INDUSTRIAL APPLICATION
    CEI EN 60300-3-11 : 2011 DEPENDABILITY MANAGEMENT - PART 3-11: APPLICATION GUIDE - RELIABILITY CENTRED MAINTENANCE
    BS EN 62308:2006 EQUIPMENT RELIABILITY - RELIABILITY ASSESSMENT METHODS
    UNE-EN 62059-31-1:2010 Electricity metering equipment - Dependability -- Part 31-1: Accelerated reliability testing - Elevated temperature and humidity
    SAE ARP 5890 : 2011 GUIDELINES FOR PREPARING RELIABILITY ASSESSMENT PLANS FOR ELECTRONIC ENGINE CONTROLS
    I.S. EN 60300-3-11:2009 DEPENDABILITY MANAGEMENT - PART 3-11: APPLICATION GUIDE - RELIABILITY CENTRED MAINTENANCE
    I.S. EN 60300-3-2:2005 DEPENDABILITY MANAGEMENT - PART 3-2: APPLICATION GUIDE - COLLECTION OF DEPENDABILITY DATA FROM THE FIELD
    UNE-EN 60300-3-11:2013 Dependability management -- Part 3-11: Application guide - Reliability centred maintenance
    I.S. EN 61811-50:2002 ELECTROMECHANICAL ALL-OR-NOTHING RELAYS - PART 50: SECTIONAL SPECIFICATION - ELECTROMECHANICAL ALL-OR-NOTHING TELECOM RELAYS OF ASSESSED QUALITY
    IEC PAS 61811-55:2000 Electromechanical all-or-nothing relays - Part 55: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 11 mm x 7,5 mm (max.) base
    I.S. EN ISO 14224:2016 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COLLECTION AND EXCHANGE OF RELIABILITY AND MAINTENANCE DATA FOR EQUIPMENT (ISO 14224:2016)
    BS EN 61811-52:2002 ELECTROMECHANICAL ALL-OR-NOTHING RELAYS - PART 52: BLANK DETAIL SPECIFICATION - ELECTROMECHANICAL ALL-OR-NOTHING TELECOM RELAYS OF ASSESSED QUALITY - TWO CHANGE-OVER CONTACTS, 20 MM X 10 MM BASE
    BS EN 62506:2013 Methods for product accelerated testing
    CEI EN 61069-5 : 1996 INDUSTRIAL-PROCESS MEASUREMENT, CONTROL AND AUTOMATION - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 5: ASSESSMENT OF SYSTEM DEPENDABILITY
    PD ISO/PAS 19451-1:2016 Application of ISO 26262:2011-2012 to semiconductors Application of concepts
    12/30187831 DC : 0 BS EN 50126-1 - RAILWAY APPLICATIONS - THE SPECIFICATION AND DEMONSTRATION OF RELIABILITY, AVAILABILITY, MAINTAINABILITY AND SAFETY (RAMS) - PART 1: GENERIC RAMS PROCESS
    BS EN 61811-53:2002 ELECTROMECHANICAL ALL-OR-NOTHING RELAYS - PART 53: BLANK DETAIL SPECIFICATION - ELECTROMECHANICAL ALL-OR-NOTHING TELECOM RELAYS OF ASSESSED QUALITY - TWO CHANGE-OVER CONTACTS, 14 MM X 9 MM BASE
    BS EN 62676-1-2:2014 VIDEO SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 1-2: SYSTEM REQUIREMENTS - PERFORMANCE REQUIREMENTS FOR VIDEO TRANSMISSION
    CEI EN 62059-31-1 : 2009 ELECTRICITY METERING EQUIPMENT - DEPENDABILITY - PART 31-1: ACCELERATED RELIABILITY TESTING - ELEVATED TEMPERATURE AND HUMIDITY
    16/30320037 DC : 0 BS ISO 26262-5 - ROAD VEHICLES - FUNCTIONAL SAFETY - PART 5: PRODUCT DEVELOPMENT AT THE HARDWARE LEVEL
    BS EN 61811-55:2002 ELECTROMECHANICAL ALL-OR-NOTHING RELAYS - PART 55: BLANK DETAIL SPECIFICATION - ELECTROMECHANICAL ALL-OR-NOTHING TELECOM RELAYS OF ASSESSED QUALITY - TWO CHANGE-OVER CONTACTS, 11 MM X 7,5 MM (MAX.) BASE
    BS EN 60300-3-15:2009 DEPENDABILITY MANAGEMENT - PART 3-15: APPLICATION GUIDE - ENGINEERING OF SYSTEM DEPENDABILITY
    BS EN 61811-54:2002 ELECTROMECHANICAL ALL-OR-NOTHING RELAYS - PART 54: BLANK DETAIL SPECIFICATION - ELECTROMECHANICAL ALL-OR-NOTHING TELECOM RELAYS OF ASSESSED QUALITY - TWO CHANGE-OVER CONTACTS, 15 MM X 7,5 MM BASE
    IEC 60300-3-11:2009 Dependability management - Part 3-11: Application guide - Reliability centred maintenance
    I.S. EN 50491-4-1:2012 GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 4-1: GENERAL FUNCTIONAL SAFETY REQUIREMENTS FOR PRODUCTS INTENDED TO BE INTEGRATED IN BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS)
    BS ISO 26262-10:2012 ROAD VEHICLES - FUNCTIONAL SAFETY - PART 10: GUIDELINE ON ISO 26262
    EN 62550 : 2017 SPARE PARTS PROVISIONING (IEC 62550:2017)
    ISO 26262-5:2011 Road vehicles Functional safety Part 5: Product development at the hardware level
    IEC 60300-3-15:2009 Dependability management - Part 3-15: Application guide - Engineering of system dependability
    ISO 14224:2016 Petroleum, petrochemical and natural gas industries Collection and exchange of reliability and maintenance data for equipment
    IEC 61811-1:2015 Electromechanical telecom elementary relays of assessed quality - Part 1: Generic specification and blank detail specification
    CEI EN 62059-41 : 2007 ELECTRICITY METERING EQUIPMENT - DEPENDABILITY - PART 41: RELIABILITY PREDICTION
    BS EN 62059-41:2006 ELECTRICITY METERING EQUIPMENT - DEPENDABILITY - PART 41: RELIABILITY PREDICTION
    PREN 50126-1 : DRAFT 2015 RAILWAY APPLICATIONS - THE SPECIFICATION AND DEMONSTRATION OF RELIABILITY, AVAILABILITY, MAINTAINABILITY AND SAFETY (RAMS) - PART 1: GENERIC RAMS PROCESS
    CEI 23-98 : 2007 GUIDANCE FOR THE CORRECT USE OF RESIDUAL CURRENT-OPERATED DEVICES (RCDS) FOR HOUSEHOLD AND SIMILAR USE
    CEI EN 62506 : 2014 METHODS FOR PRODUCT ACCELERATED TESTING
    07/30144128 DC : 0 BS EN 60300-3-15 - DEPENDABILITY MANAGEMENT - PART 3-15: GUIDANCE TO ENGINEERING OF SYSTEM DEPENDABILITY
    16/30335990 DC : 0 BS ISO 26262-11 - ROAD VEHICLES - FUNCTIONAL SAFETY - PART 11: GUIDELINE ON APPLICATION OF ISO 26262 TO SEMICONDUCTORS
    CEI EN 60300-3-15 : 2011 DEPENDABILITY MANAGEMENT - PART 3-15: APPLICATION GUIDE - ENGINEERING OF SYSTEM DEPENDABILITY
    CEI EN 60300-3-4 : 2010 DEPENDABILITY MANAGEMENT - PART 3-4: APPLICATION GUIDE - GUIDE TO THE SPECIFICATION OF DEPENDABILITY REQUIREMENTS
    BS EN 50495 : 2010 SAFETY DEVICES REQUIRED FOR THE SAFE FUNCTIONING OF EQUIPMENT WITH RESPECT TO EXPLOSION RISKS
    02/645215 DC : DRAFT OCT 2002 EN 50090-2-3:2002 - HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 2-3: SYSTEM OVERVIEW - GENERAL FUNCTIONAL SAFETY REQUIREMENTS FOR PRODUCTS INTENDED TO BE INTEGRATED IN HBES
    I.S. EN 50090-2-3:2005 HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 2-3: SYSTEM OVERVIEW - GENERAL FUNCTIONAL SAFETY REQUIREMENTS FOR PRODUCTS INTENDED TO BE INTEGRATED IN HBES
    BS EN 60300-3-2:2005 DEPENDABILITY MANAGEMENT - PART 3-2: APPLICATION GUIDE - COLLECTION OF DEPENDABILITY DATA FROM THE FIELD
    BS EN 61811-50:2002 ELECTROMECHANICAL ALL-OR-NOTHING RELAYS - PART 50: SECTIONAL SPECIFICATION - ELECTROMECHANICAL ALL-OR-NOTHING TELECOM RELAYS OF ASSESSED QUALITY
    BS EN 60300-3-1:2004 DEPENDABILITY MANAGEMENT - PART 3-1: APPLICATION GUIDE - ANALYSIS TECHNIQUES FOR DEPENDABILITY - GUIDE ON METHODOLOGY
    I.S. EN 61069-5:2016 INDUSTRIAL-PROCESS MEASUREMENT, CONTROL AND AUTOMATION - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 5: ASSESSMENT OF SYSTEM DEPENDABILITY
    I.S. EN 61069-2:2016 INDUSTRIAL-PROCESS MEASUREMENT, CONTROL AND AUTOMATION - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 2: ASSESSMENT METHODOLOGY
    I.S. EN 62059-41:2006 ELECTRICITY METERING EQUIPMENT - DEPENDABILITY - PART 41: RELIABILITY PREDICTION
    ISO/PAS 19451-1:2016 Application of ISO 26262:2011-2012 to semiconductors Part 1: Application of concepts
    IEC 61163-2:1998 Reliability stress screening - Part 2: Electronic components
    I.S. EN 62308:2006 EQUIPMENT RELIABILITY - RELIABILITY ASSESSMENT METHODS
    IEC 61069-2:2016 Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 2: Assessment methodology
    12/30228018 DC : 0 BS EN 61557-15 - ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 15: FUNCTIONAL SAFETY REQUIREMENTS FOR INSULATION MONITORING DEVICES AND FOR EQUIPMENT FOR INSULATION FAULT LOCATION IN IT SYSTEMS
    IEC 60300-3-2:2004 Dependability management - Part 3-2: Application guide - Collection of dependability data from the field
    IEC 61811-53:2002 Electromechanical all-or-nothing relays - Part 53: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 14 mm x 9 mm base
    IEC 61557-15:2014 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 15: Functional safety requirements for insulation monitoring devices in IT systems and equipment for insulation fault location in IT systems
    IEC 62676-1-2:2013 Video surveillance systems for use in security applications - Part 1-2: System requirements - Performance requirements for video transmission
    IEC 60300-3-1:2003 Dependability management - Part 3-1: Application guide - Analysis techniques for dependability - Guide on methodology
    IEC 61811-51:2002 Electromechanical all-or-nothing relays - Part 51: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Non-standardized types and construction
    IEC 61811-55:2002 Electromechanical all-or-nothing relays - Part 55: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 11 mm x 7,5 mm (max.) base
    IEC 61811-52:2002 Electromechanical all-or-nothing relays - Part 52: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 20 mm x 10 mm base
    IEC 61811-10:2002 Electromechanical elementary relays of assessed quality - Part 10: Sectional specification - Relays for industrial application
    IEC 61811-54:2002 Electromechanical all-or-nothing relays - Part 54: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 15 mm x 7,5 mm base
    IEC 61811-50:2002 Electromechanical all-or-nothing relays - Part 50: Sectional specification - Electromechanical all-or-nothing telecom relays of assessed quality
    IEC 62059-41:2006 Electricity metering equipment - Dependability - Part 41: Reliability prediction
    IEC 62506:2013 Methods for product accelerated testing
    EN 61811-1:2015 ELECTROMECHANICAL TELECOM ELEMENTARY RELAYS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION AND BLANK DETAIL SPECIFICATION (IEC 61811-1:2015)
    EN 61811-52 : 2002 ELECTROMECHANICAL ALL-OR-NOTHING RELAYS - PART 52: BLANK DETAIL SPECIFICATION - ELECTROMECHANICAL ALL-OR-NOTHING TELECOM RELAYS OF ASSESSED QUALITY - TWO CHANGE-OVER CONTACTS, 20 MM X 10 MM BASE
    I.S. EN 50126-1:2017 RAILWAY APPLICATIONS - THE SPECIFICATION AND DEMONSTRATION OF RELIABILITY, AVAILABILITY, MAINTAINABILITY AND SAFETY (RAMS) - PART 1: GENERIC RAMS PROCESS
    BS EN 61811-1:2015 Electromechanical telecom elementary relays of assessed quality Generic specification and blank detail specification
    UNE-EN 60300-3-4:2011 Dependability management -- Part 3-4: Application guide - Guide to the specification of dependability requirements
    I.S. EN 61811-10:2003 ELECTROMECHANICAL ELEMENTARY RELAYS OF ASSESSED QUALITY - PART 10: SECTIONAL SPECIFICATION - RELAYS FOR INDUSTRIAL APPLICATION
    CEI EN 60300-3-1 : 2005 DEPENDABILITY MANAGEMENT - PART 3-1: APPLICATION GUIDE - ANALYSIS TECHNIQUES FOR DEPENDABILITY - GUIDE ON METHODOLOGY
    BS EN 62550:2017 SPARE PARTS PROVISIONING
    CSA ISO/IEC 14762 : 2010 INFORMATION TECHNOLOGY - FUNCTIONAL SAFETY REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES)
    BS EN 62059-31-1:2008 (published 2009-03) Electricity metering equipment. Dependability Accelerated reliability testing. Elevated temperature and humidity
    BS EN 61811-51:2002 ELECTROMECHANICAL ALL-OR-NOTHING RELAYS - PART 51: BLANK DETAIL SPECIFICATION - ELECTROMECHANICAL ALL-OR-NOTHING TELECOM RELAYS OF ASSESSED QUALITY - NON-STANDARDIZED TYPES AND CONSTRUCTION
    BS EN 50491-4-1:2012 GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 4-1: GENERAL FUNCTIONAL SAFETY REQUIREMENTS FOR PRODUCTS INTENDED TO BE INTEGRATED IN BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS)
    17/30310522 DC : 0 BS EN 60812 ED 3.0 - FAILURE MODE AND EFFECTS ANALYSIS (FMEA)
    BS ISO 26262-5:2011 ROAD VEHICLES - FUNCTIONAL SAFETY - PART 5: PRODUCT DEVELOPMENT AT THE HARDWARE LEVEL
    BS EN 60300-3-11:2009 DEPENDABILITY MANAGEMENT - PART 3-11: APPLICATION GUIDE - RELIABILITY CENTRED MAINTENANCE
    14/30298031 DC : 0 BS EN 61069-5 ED 2.0 - INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 5: ASSESSMENT OF SYSTEM DEPENDABILITY
    03/108624 DC : DRAFT JULY 2003 IEC 60300-3-2 - DEPENDABILITY MANAGEMENT - PART 3-2: APPLICATION GUIDE - COLLECTION OF DEPENDABILITY DATA FROM THE FIELD
    15/30330403 DC : 0 BS EN 50126-1 - RAILWAY APPLICATIONS - THE SPECIFICATION AND DEMONSTRATION OF RELIABILITY, AVAILABILITY, MAINTAINABILITY AND SAFETY (RAMS) - PART 1: GENERIC RAMS PROCESS
    BS EN 60300-3-4:2008 Dependability management Application guide. Guide to the specification of dependability requirements
    CEI 56-36 : 2000 RELIABILITY STRESS SCREENING - PART 2: ELECTRONIC COMPONENTS
    I.S. EN 61811-54:2002 ELECTROMECHANICAL ALL-OR-NOTHING RELAYS - PART 54: BLANK DETAIL SPECIFICATION - ELECTROMECHANICAL ALL-OR-NOTHING TELECOM RELAYS OF ASSESSED QUALITY - TWO CHANGE-OVER CONTACTS, 15 MM X 7,5 MM BASE
    I.S. EN 61811-53:2002 ELECTROMECHANICAL ALL-OR-NOTHING RELAYS - PART 53: BLANK DETAIL SPECIFICATION - ELECTROMECHANICAL ALL-OR-NOTHING TELECOM RELAYS OF ASSESSED QUALITY - TWO CHANGE-OVER CONTACTS, 14 MM X 9 MM BASE
    I.S. EN 62059-31-1:2008 ELECTRICITY METERING EQUIPMENT - DEPENDABILITY - PART 31-1: ACCELERATED RELIABILITY TESTING - ELEVATED TEMPERATURE AND HUMIDITY
    I.S. EN 61557-15:2014 ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 15: FUNCTIONAL SAFETY REQUIREMENTS FOR INSULATION MONITORING DEVICES IN IT SYSTEMS AND EQUIPMENT FOR INSULATION FAULT LOCATION IN IT SYSTEMS
    CEI EN 50491-4-1 : 2014 GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 4-1: GENERAL FUNCTIONAL SAFETY REQUIREMENTS FOR PRODUCTS INTENDED TO BE INTEGRATED IN BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS)
    I.S. EN 60300-3-4:2008 DEPENDABILITY MANAGEMENT - PART 3-4: APPLICATION GUIDE - GUIDE TO THE SPECIFICATION OF DEPENDABILITY REQUIREMENTS
    I.S. EN 50495:2010 SAFETY DEVICES REQUIRED FOR THE SAFE FUNCTIONING OF EQUIPMENT WITH RESPECT TO EXPLOSION RISKS
    ISO/IEC 14762:2009 Information technology Functional safety requirements for Home and Building Electronic Systems (HBES)
    I.S. EN 61811-1:2015 ELECTROMECHANICAL TELECOM ELEMENTARY RELAYS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION AND BLANK DETAIL SPECIFICATION
    UNE-EN 50491-4-1:2013 General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 4-1: General functional safety requirements for products intended to be integrated in Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS)
    I.S. EN 60300-3-1:2004 DEPENDABILITY MANAGEMENT - PART 3-1: APPLICATION GUIDE - ANALYSIS TECHNIQUES FOR DEPENDABILITY - GUIDE ON METHODOLOGY
    I.S. EN 61811-52:2002 ELECTROMECHANICAL ALL-OR-NOTHING RELAYS - PART 52: BLANK DETAIL SPECIFICATION - ELECTROMECHANICAL ALL-OR-NOTHING TELECOM RELAYS OF ASSESSED QUALITY - TWO CHANGE-OVER CONTACTS, 20 MM X 10 MM BASE
    I.S. EN 61811-55:2002 ELECTROMECHANICAL ALL-OR-NOTHING RELAYS - PART 55: BLANK DETAIL SPECIFICATION - ELECTROMECHANICAL ALL-OR-NOTHING TELECOM RELAYS OF ASSESSED QUALITY - TWO CHANGE-OVER CONTACTS, 11 MM X 7,5 MM (MAX.) BASE
    IEC 62308:2006 Equipment reliability - Reliability assessment methods
    BS EN ISO 14224:2016 Petroleum, petrochemical and natural gas industries. Collection and exchange of reliability and maintenance data for equipment
    BS EN 61557-15:2014 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measures Functional safety requirements for insulation monitoring devices in IT systems and equipment for insulation fault location in IT systems
    IEC 60300-3-4:2007 Dependability management - Part 3-4: Application guide - Guide to the specification of dependability requirements
    EN 61069-5:2016 INDUSTRIAL-PROCESS MEASUREMENT, CONTROL AND AUTOMATION - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 5: ASSESSMENT OF SYSTEM DEPENDABILITY
    EN 61811-55 : 2002 ELECTROMECHANICAL ALL-OR-NOTHING RELAYS - PART 55: BLANK DETAIL SPECIFICATION - ELECTROMECHANICAL ALL-OR-NOTHING TELECOM RELAYS OF ASSESSED QUALITY - TWO CHANGE-OVER CONTACTS, 11 MM X 7,5 MM (MAX.) BASE
    EN 62676-1-2:2014/AC:2015 VIDEO SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 1-2: SYSTEM REQUIREMENTS - PERFORMANCE REQUIREMENTS FOR VIDEO TRANSMISSION (IEC 62676-1-2:2013)
    EN 61811-53 : 2002 ELECTROMECHANICAL ALL-OR-NOTHING RELAYS - PART 53: BLANK DETAIL SPECIFICATION - ELECTROMECHANICAL ALL-OR-NOTHING TELECOM RELAYS OF ASSESSED QUALITY - TWO CHANGE-OVER CONTACTS, 14 MM X 9 MM BASE
    EN 60300-3-11 : 2009 DEPENDABILITY MANAGEMENT - PART 3-11: APPLICATION GUIDE - RELIABILITY CENTRED MAINTENANCE
    EN 60300-3-1 : 2004 DEPENDABILITY MANAGEMENT - PART 3-1: APPLICATION GUIDE - ANALYSIS TECHNIQUES FOR DEPENDABILITY - GUIDE ON METHODOLOGY
    EN 61069-2:2016 INDUSTRIAL-PROCESS MEASUREMENT, CONTROL AND AUTOMATION - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 2: ASSESSMENT METHODOLOGY (IEC 61069-2:2016)
    EN 62059-31-1 : 2008 ELECTRICITY METERING EQUIPMENT - DEPENDABILITY - PART 31-1: ACCELERATED RELIABILITY TESTING - ELEVATED TEMPERATURE AND HUMIDITY
    EN 62059-41 : 2006 ELECTRICITY METERING EQUIPMENT - DEPENDABILITY - PART 41: RELIABILITY PREDICTION
    EN 50491-4-1:2012 GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 4-1: GENERAL FUNCTIONAL SAFETY REQUIREMENTS FOR PRODUCTS INTENDED TO BE INTEGRATED IN BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS)
    EN 61811-50 : 2002 ELECTROMECHANICAL ALL-OR-NOTHING RELAYS - PART 50: SECTIONAL SPECIFICATION - ELECTROMECHANICAL ALL-OR-NOTHING TELECOM RELAYS OF ASSESSED QUALITY
    EN 50090-2-3 : 2005 HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 2-3: SYSTEM OVERVIEW - GENERAL FUNCTIONAL SAFETY REQUIREMENTS FOR PRODUCTS INTENDED TO BE INTEGRATED IN HBES

    Standards Referencing This Book - (Show below) - (Hide below)

    IEC 62308:2006 Equipment reliability - Reliability assessment methods
    IEC 61812-1:2011 Time relays for industrial and residential use - Part 1: Requirements and tests
    EN 300 019-1-5 : 2.1.4 ENVIRONMENTAL ENGINEERING (EE); ENVIRONMENTAL CONDITIONS AND ENVIRONMENTAL TESTS FOR TELECOMMUNICATIONS EQUIPMENT; PART 1-5: CLASSIFICATION OF ENVIRONMENTAL CONDITIONS; GROUND VEHICLE INSTALLATIONS
    IEC 60319:1999 Presentation and specification of reliability data for electronic components
    IEC 60300-3-3:2017 Dependability management - Part 3-3: Application guide - Life cycle costing
    IEC 61649:2008 Weibull analysis
    IEC 62741:2015 Demonstration of dependability requirements - The dependability case
    IEC 61014:2003 Programmes for reliability growth
    IEC 60050-151:2001 International Electrotechnical Vocabulary (IEV) - Part 151: Electrical and magnetic devices
    IEC 61360-4:2005 Standard data element types with associated classification scheme for electric components - Part 4: IEC reference collection of standard data element types and component classes
    IEC 60605-6:2007 Equipment reliability testing - Part 6: Tests for the validity and estimation of the constant failure rate and constant failure intensity
    ETS 300 200019-1-4 : 20001 EQUIPMENT ENGINEERING (EE); ENVIRONMENTAL CONDITIONS AND ENVIRONMENTAL TESTS FOR TELECOMMUNICATIONS EQUIPMENT - CLASSIFICATION OF ENVIRONMENTAL CONDITIONS - STATIONARY USE AT NON-WEATHERPROTECTED LOCATIONS
    VITA 51.2 : 2016 PHYSICS OF FAILURE RELIABILITY PREDICTIONS
    IEC 60721-3-7:1995+AMD1:1996 CSV Classification of environmental conditions - Part 3-7: Classification of groups of environmental parameters and their severities - Portable and non-stationary use
    IEC 60721-3-5:1997 Classification of environmental conditions - Part 3: Classificationof groups of environmental parameters and their severities -Section 5: Ground vehicle installations
    EN 300 019-1-7 : 2.1.4 ENVIRONMENTAL ENGINEERING (EE); ENVIRONMENTAL CONDITIONS AND ENVIRONMENTAL TESTS FOR TELECOMMUNICATIONS EQUIPMENT; PART 1-7: CLASSIFICATION OF ENVIRONMENTAL CONDITIONS; PORTABLE AND NON-STATIONARY USE
    ISO 10303-31:1994 Industrial automation systems and integration Product data representation and exchange Part 31: Conformance testing methodology and framework: General concepts
    IEC TR 62380:2004 Reliability data handbook - Universal model for reliability prediction of electronics components, PCBs and equipment
    IEC 61360-1:2017 Standard data element types with associated classification scheme - Part 1: Definitions - Principles and methods
    IEC 60650:1979 Analogue counting ratemeters. Characteristics and test methods
    ISO 10303-11:2004 Industrial automation systems and integration Product data representation and exchange Part 11: Description methods: The EXPRESS language reference manual
    IEC 61810-2:2017 Electromechanical elementary relays - Part 2: Reliability
    IEC 61163-2:1998 Reliability stress screening - Part 2: Electronic components
    DEFSTAN 00-42(PT3)/4(2011) : 2011 RELIABILITY AND MAINTAINABILITY ASSURANCE GUIDE - PART 3: R&M CASE
    IEC 60300-3-2:2004 Dependability management - Part 3-2: Application guide - Collection of dependability data from the field
    IEC 61810-2-1:2017 Electromechanical elementary relays - Part 2-1: Reliability - Procedure for the verification of B10 values
    IEC 60747-12-2:1995 Semiconductor devices - Part 12: Optoelectronic devices - Section 2: Blank detail specification for laser diode modules with pigtail for fibre optic systems and sub-systems
    IEC 61703:2016 Mathematical expressions for reliability, availability, maintainability and maintenance support terms
    IEC TR 60943:1998+AMD1:2008 CSV Guidance concerning the permissible temperature rise for parts of electrical equipment, in particular for terminals
    IEC 60747-1:2006+AMD1:2010 CSV Semiconductor devices - Part 1: General
    AS/NZS IEC 62550:2019 Spare Parts Provisioning
    MIL C 18312 : G CAPACITOR, FIXED, METALLIZED (PAPER-PLASTIC, OR PLASTIC FILM) DIELECTRIC, DIRECT CURRENT (HERMETICALLY SEALED IN METAL CASES), GENERAL SPECIFICATION FOR
    IEC 60721-3-3:1994+AMD1:1995+AMD2:1996 CSV Classification of environmental conditions - Part 3-3: Classification of groups of environmental parameters and their severities - Stationary use at weatherprotected locations
    AS/NZS IEC 60812:2020 Failure modes and effects analysis (FMEA and FMECA)
    EN 300 019-1-8 : 2.1.4 ENVIRONMENTAL ENGINEERING (EE); ENVIRONMENTAL CONDITIONS AND ENVIRONMENTAL TESTS FOR TELECOMMUNICATIONS EQUIPMENT; PART 1-8: CLASSIFICATION OF ENVIRONMENTAL CONDITIONS; STATIONARY USE AT UNDERGROUND LOCATIONS
    IEC 60050-521:2002 International Electrotechnical Vocabulary (IEV) - Part 521: Semiconductor devices and integrated circuits
    IEC 61710:2013 Power law model - Goodness-of-fit tests and estimation methods
    ETS 300 200019-1-3 : 20001 EQUIPMENT ENGINEERING (EE); ENVIRONMENTAL CONDITIONS AND ENVIRONMENTAL TESTS FOR TELECOMMUNICATIONS EQUIPMENT - CLASSIFICATION OF ENVIRONMENTAL CONDITIONS - STATIONARY USE AT WEATHERPROTECTED LOCATIONS
    IEC 60300-3-5:2001 Dependability management - Part 3-5: Application guide - Reliability test conditions and statistical test principles
    AS/NZS 62676.1.2:2020 Video surveillance systems for use in security applications System requirements - Performance requirements for video transmission (IEC 62676-1-2:2013, MOD)
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective