Skip to content
Please enter a keyword to search

  • IEC 61753-1:2007

    View superseded by
    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
    View superseded by

    Fibre optic interconnecting devices and passive components performance standard - Part 1: General and guidance for performance standards

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Superseded date:  31-12-2021

    Language(s):  English, English - French

    Published date:  13-03-2007

    Publisher:  International Electrotechnical Committee

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    FOREWORD
    INTRODUCTION
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 Preparation of a performance standard
      4.1 Performance standard title
      4.2 Tests
      4.3 Details
      4.4 Requirements
      4.5 Sample size
      4.6 Sample definition
      4.7 Groupings/sequences
      4.8 Pass/fail criteria
      4.9 Reference product definition
      4.10 Performance standard test report
      4.11 Environmental aspects
    Annex A (normative) Tests and severities for
            performance standards
    Annex B (informative) Test sequencing for
            category O
    Annex C (informative) Mixing of products with
            different performance category
    Annex D (informative) Performance standard
            numbering
    Annex E (informative) Minimum temperature
            value in Finland
    Bibliography

    Abstract - (Show below) - (Hide below)

    IEC 61753-1 deals with performance standards for all passive fibre optic products, including connectors, passive optical components, fibre management systems and closures. It defines those tests and severities which form the performance categories or general operating service environments and identifies those tests which are considered to be product specific.

    General Product Information - (Show below) - (Hide below)

    Committee TC 86/SC 86B
    Development Note Supersedes IEC 61753-1-1. (03/2007) A Bilingual edition has been published. (03/2008) Stability Date: 2017. (09/2017)
    Document Type Standard
    Publisher International Electrotechnical Committee
    Status Superseded
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    08/30171597 DC : DRAFT JUNE 2008 BS EN 61753-111-7 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 111-7: SEALED CLOSURES FOR CATEGORY A - AERIAL
    I.S. EN 62343-2:2014 DYNAMIC MODULES - PART 2: RELIABILITY QUALIFICATION
    I.S. EN 62149-5:2011 FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 5: ATM-PON TRANSCEIVERS WITH LD DRIVER AND CDR ICS
    BS EN 61753-071-2:2014 Fibre optic interconnecting devices and passive components. Performance standard Non-connectorised single-mode fibre optic 1 x 2 and 2 x 2 spatial switches for category C. Controlled environments
    CEI EN 61754-24-21 : 2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 24-21: TYPE SC-RJ CONNECTORS WITH PROTECTIVE HOUSINGS BASED ON IEC 61076-3-106, VARIANT 06
    CEI EN 50377-8-8 : 2009 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-8: LSH-APC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U
    CEI EN 50378-3-1 : 2008 PASSIVE COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: TYPE: 100/200 GHZ DWDM MODULE TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLE MODE FIBRE
    CEI EN 50377-8-3 : 2008 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-3: LSH-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, COMPOSITE FERRULE CATEGORY C
    CEI EN 62496-3-1 : 2011 OPTICAL CIRCUIT BOARDS - PERFORMANCE STANDARD - PART 3-1: FLEXIBLE OPTICAL CIRCUIT BOARDS USING UNCONNECTORIZED OPTICAL GLASS FIBRES
    CEI EN 61755-3-2 : 2010 FIBRE OPTIC CONNECTOR OPTICAL INTERFACES - PART 3-2: OPTICAL INTERFACE, 2.5 MM AND 1.25 MM DIAMETER CYLINDRICAL FULL ZIRCONIA FERRULES FOR 8 DEGREES ANGLED-PC SINGLE MODE FIBRES
    CEI EN 50377-8-13 : 2012 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-13: TYPE LSH-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY U
    11/30247515 DC : 0 BS EN 61753-021-3 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 021-3: SINGLE-MODE FIBRE OPTIC CONNECTORS FOR CATEGORY U - UNCONTROLLED ENVIRONMENT
    BS EN 50411-2-9:2010 Fibre organisers and closures to be used in optical fibre communications systems. Product specifications Non-sealed closures for air blown fibre microduct cable, for category S & A
    08/30171606 DC : DRAFT JUNE 2008 BS EN 61753-111-8 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 111-8: SEALED CLOSURES FOR CATEGORY G - GROUND
    CEI EN 61300-2-44 : 2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-44: TESTS - FLEXING OF THE STRAIN RELIEF OF FIBRE OPTIC DEVICES
    CEI EN 61753-021-2 : 2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 021-2: GRADE C/3 SINGLE-MODE FIBRE OPTIC CONNECTORS FOR CATEGORY C - CONTROLLED ENVIRONMENT
    BS EN 50377-9-2:2004 Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type MT-RJ terminated on IEC 60793-2 category B1.1 singlemode fibre
    15/30272336 DC : 0 BS EN 50411-3-4 - FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-4: FIBRE MANAGEMENT SYSTEM, MODULAR SPLICE AND CONNECTOR WALL BOX, FOR CATEGORY C & A
    12/30218817 DC : 0 BS EN 62005-9-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - RELIABILITY - PART 9-1: QUALIFICATION OF PASSIVE OPTICAL COMPONENTS
    I.S. EN 61753-053-2:2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 053-2: NON-CONNECTORIZED SINGLE-MODE FIBRE, ELECTRICALLY CONTROLLED, VARIABLE OPTICAL ATTENUATOR FOR CATEGORY C - CONTROLLED ENVIRONMENTS
    05/30128969 DC : 0 EN 50377-4-4 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 4-4: TYPE SC-PC SIMPLEX TERMINATED ON IEC 60793-2 CATEGORY B1.1 SINGLEMODE FIBRE
    BS EN 61753-053-2:2014 Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode fibre, electrically controlled, variable optical attenuator for category C. Controlled environments
    BS EN 50377-8-10:2010 Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category C
    I.S. EN 62343-3-1:2016 DYNAMIC MODULES - PART 3-1: PERFORMANCE SPECIFICATION TEMPLATES - DYNAMIC CHANNEL EQUALIZERS
    BS EN 61753-088-2:2013 Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode fibre optic LAN WDM devices with channel spacing of 800 GHz for category C. Controlled environments
    12/30272508 DC : DRAFT SEP 2012 BS EN 61755-3-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. FIBRE OPTIC CONNECTOR OPTICAL INTERFACES - CONNECTORS WITH 2,5 MM AND 1,25 MM DIAMETER CYLINDRICAL FULL ZIRCONIA FERRULE, NON-ANGLED SINGLE MODE NON-DISPERSION SHIFTED FIBRES
    BS EN 60794-2-51:2014 Optical fibre cables Indoor cables. Detail specification for simplex and duplex cables for use in cords for controlled environment
    BS EN 61753-381-2:2016 Fibre optic interconnecting devices and passive components. Performance standard Cyclic arrayed waveguide grating. Category C (controlled environment)
    BS EN 50377-16-1:2011 Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type LF3 APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category C
    UNE-EN 50377-4-2:2015 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 4-2: Type SC/APC simplex 8° terminated on IEC 60793-2-50 of types B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U
    CEI EN 50377-14-1 : 2012 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 14-1: CORDS WITH IEC 60793-2-50 SINGLEMODE CATEGORY B1.1 AND B1.3 FIBRE FOR CATEGORY C
    CEI EN 61753-021-3 : 2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 021-3: SINGLE-MODE FIBRE OPTIC CONNECTORS FOR CATEGORY U - UNCONTROLLED ENVIRONMENT
    13/30277630 DC : 0 BS EN 50411-2-10 - FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-10: SEALED FIBRE SPLICE CLOSURES TYPE 2, CATEGORY G, FOR FTTH OPTICAL DISTRIBUTION NETWORKS
    17/30347862 DC : 0 BS EN 50377-14-1 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 14-1: SIMPLEX AND DUPLEX CORDS MADE FROM SIMPLEX PLUGS WITH CYLINDRICAL FERRULES, USING EN 60793-2-50 SINGLEMODE B1 OR B6 FIBRE FOR CATEGORY C ACCORDING TO EN 61753-1
    CEI EN 61754-24-11 : 2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 24-11: TYPE SC-RJ CONNECTORS WITH PROTECTIVE HOUSINGS BASED ON IEC 61076-3-117
    I.S. EN 61753-111-7:2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 111-7: SEALED CLOSURES FOR CATEGORY A - AERIAL
    BS EN 50377-9-1:2003 Connectors sets and interconnect components to be used in optical fibre communication systems. Product specifications Type MT-RJ terminated on IEC 60793-2 category A1a and A1b multimode fibre
    BS EN 61753-061-2:2012 Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode fibre optic pigtailed isolators for category C. Controlled environment
    BS EN 61755-1:2006 Fibre optic connector optical interfaces Optical interfaces for single mode non-dispersion shifted fibres. General and guidance
    08/30189758 DC : DRAFT SEP 2008 BS EN 50377-13-3 - CONNECTORS SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 13-3: TYPE LX.5-APC DUPLEX TERMINATED ON EN 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U
    BS EN 61754-24-21:2009 Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces Type SC-RJ connectors with protective housings based on IEC 61076-3-106, variant 06
    I.S. EN 61753-031-3:2015 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 031-3: NON-CONNECTORIZED SINGLEMODE 1N AND 2N NON-WAVELENGTH-SELECTIVE BRANCHING DEVICES FOR CATEGORY U - UNCONTROLLED ENVIRONMENT
    06/30156182 DC : DRAFT SEP 2006 BS EN 61753-022-2 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 022-2: FIBRE OPTIC CONNECTORS TERMINATED ON MULTIMODE FIBRE FOR CATEGORY C - CONTROLLED ENVIRONMENT
    CEI EN 50411-2-8 : 2010 FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-8: MICRODUCT CONNECTORS, FOR AIR BLOWN OPTICAL FIBRES, TYPE 1
    10/30228173 DC : 0 BS EN 61755-3-31 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR OPTICAL INTERFACES - PART 3-31: OPTICAL INTERFACE, 8 DEGREES ANGLED PC, PLOYHENYLENE SULPHIDE RECTANGULAR FERRULE, SINGLE MODE FIBRES
    CEI EN 61753-021-6 : 2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 021-6: GRADE B/2 SINGLE-MODE FIBRE OPTIC CONNECTORS FOR CATEGORY O - UNCONTROLLED ENVIRONMENT
    BS EN 50377-14-1:2011 Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Cords with IEC 60793-2-50 singlemode category B1.1 and B1.3 fibre for category C
    BS EN 61758-1:2008 Fibre optic interconnecting devices and passive components. Interface standard for closures General and guidance
    PREN 50411-3-8 : DRAFT 2014 FIBRE ORGANIZERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-8: FIBRE MANAGEMENT SYSTEM, TERMINAL EQUIPMENT BOX TYPE 1 FOR CATEGORY C
    NF EN 50377-15-1 : 2011 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 15-1: TYPE MPO WITH 12-FIBRE PPS FERRULES TERMINATED ON IEC 60793-2 CATEGORY A1A MULTIMODE FIBRE FOR 50/125 MICRON MULTIMODE FIBRE
    10/30235313 DC : DRAFT SEP 2010 BS EN 50411-6-1 - FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 6-1: UNPROTECTED MICRODUCT FOR CATEGORY S AND A
    11/30257677 DC : 0 BS EN 62343-1-3 - DYNAMIC MODULES - PART 1-3: PERFORMANCE STANDARDS - DYNAMIC GAIN TILT EQUALIZER (NON-CONNECTORIZED)
    BS EN 50411-2-5:2009 Fibre organisers and closures to be used in optical fibre communication systems. Product specifications Sealed closures for air blown fibre microduct, type 1, for category S & A
    07/30163785 DC : 0 BS EN 50377-3-1 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: TYPE SG TERMINATED ON IEC 60793-2-10 CATEGORY A1A, A1B OR EQUIVALENT MULTIMODE FIBRE FOR CATEGORY C
    DD IEC PAS 61755-3-32 : DRAFT DEC 2007 FIBRE OPTIC CONNECTOR OPTICAL INTERFACES - PART 3-32: OPTICAL INTERFACE - 8 DEGREES ANGLED-PC END-FACE THERMOSET RECTANGULAR FERRULE, SINGLE MODE FIBRES
    08/30178192 DC : DRAFT FEB 2008 BS EN 61753-121-2 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - TERMINATED CABLE ASSEMBLIES - PART 121-2: PERFORMANCE STANDARD FOR SIMPLEX AND DUPLEX CORDS WITH SINGLE MODE FIBRE AND CYLINDRICAL FERRULE CONNECTORS FOR CATEGORY C - CONTROLLED ENVIRONMENT
    08/30195624 DC : 0 BS EN 50377-8-11 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-11: TYPE LSH-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLE MODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY C
    09/30201674 DC : 0 BS EN 60794-2-51 - OPTICAL FIBRE CABLES - PART 2-51: INDOOR OPTICAL FIBRE CABLES PRODUCT SPECIFICATION FOR SIMPLEX AND DUPLEX CABLES FOR USE IN PATCHCORDS FOR CONTROLLED ENVIRONMENT
    08/30195627 DC : 0 BS EN 50377-8-12 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-12: TYPE LSH-APC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLE MODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY U
    BS EN 61753-021-6:2008 Fibre optic interconnecting devices and passive components performance standard Grade B/2 single-mode fibre optic connectors for category O. Uncontrolled environment
    CEI EN 61753-101-3 : 2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 101-3: FIBRE MANAGEMENT SYSTEMS FOR CATEGORY U - UNCONTROLLED ENVIRONMENT
    I.S. EN 61300-2-35:2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-35: TESTS - CABLE NUTATION
    06/30156214 DC : DRAFT SEP 2006 BS EN 50377-8-9 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-9: LSH-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U
    08/30186708 DC : DRAFT JULY 2008 BS EN 62496-3-1 - OPTICAL CIRCUIT BOARDS - PERFORMANCE STANDARD - PART 3-1: FLEXIBLE OPTICAL CIRCUIT BOARDS USING UNCONNECTORIZED OPTICAL GLASS FIBRES
    IEC TR 62343-6-1:2011 Dynamic modules - Part 6-1: Dynamic channel equalizers
    BS EN 61300-2-35:2014 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Tests. Cable nutation
    08/30195621 DC : 0 BS EN 50377-8-10 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-10: TYPE LSH-APC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLE MODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY C
    NF EN 61753-088-2 : 2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 088-2: NON-CONNECTORIZED SINGLE-MODE FIBRE OPTIC LAN WDM DEVICES WITH CHANNEL SPACING OF 800 GHZ FOR CATEGORY C - CONTROLLED ENVIRONMENTS
    CEI EN 50377-13-3 : 2012 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 13-3: TYPE LX.5-APC DUPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U
    I.S. EN 61754-24-11:2009 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 24-11: TYPE SC-RJ CONNECTORS WITH PROTECTIVE HOUSINGS BASED ON IEC 61076-3-117
    IEC TR 62343-6-4:2017 Dynamic modules - Part 6-4: Design guides - Reconfigurable optical add/drop multiplexer
    I.S. EN 62343-1-3:2013 DYNAMIC MODULES - PART 1-3: PERFORMANCE STANDARDS - DYNAMIC GAIN TILT EQUALIZER (NON-CONNECTORIZED) (IEC 62343-1-3:2012 (EQV))
    I.S. EN 61280-4-2:2014 FIBRE-OPTIC COMMUNICATION SUBSYSTEM TEST PROCEDURES - PART 4-2: INSTALLED CABLE PLANT - SINGLE-MODE ATTENUATION AND OPTICAL RETURN LOSS MEASUREMENT
    I.S. EN 61753-141-2:2011 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 141-2: FIBRE OPTIC PASSIVE CHROMATIC DISPERSION COMPENSATOR USING SINGLE-MODE DISPERSION COMPENSATING FIBRE FOR CATEGORY C - CONTROLLED ENVIRONMENTS
    I.S. EN 61753-031-2:2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 031-2: NON-CONNECTORIZED SINGLE-MODE 1XN AND 2XN NON-WAVELENGTH-SELECTIVE BRANCHING DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT
    I.S. EN 50377-8-3:2007 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-3: LSH-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, COMPOSITE FERRULE CATEGORY C
    I.S. EN 61753-022-2:2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 022-2: FIBRE OPTIC CONNECTORS TERMINATED ON MULTIMODE FIBRE FOR CATEGORY C - CONTROLLED ENVIRONMENT (IEC 61753-022-2:2012 (EQV))
    I.S. EN 50377-8-5:2007 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-5: LSH-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, COMPOSITE FERRULE CATEGORY U
    I.S. EN 61755-3-31:2015 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - CONNECTOR OPTICAL INTERFACES - PART 3-31: CONNECTOR PARAMETERS OF NON-DISPERSION SHIFTED SINGLE MODE PHYSICALLY CONTACTING FIBRES - ANGLED POLYPHENYLENE SULPHIDE RECTANGULAR FERRULES
    CEI EN 50377-3-1 : 2009 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: TYPE SG TERMINATED ON IEC 60793-2-10 CATEGORY A1A, A1B OR EQUIVALENT MULTIMODE FIBRE FOR CATEGORY C
    I.S. EN 61755-3-32:2016 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - CONNECTOR OPTICAL INTERFACES - PART 3-32: CONNECTOR PARAMETERS OF NON-DISPERSION SHIFTED SINGLE MODE PHYSICALLY CONTACTING FIBRES - ANGLED THERMOSET EPOXY RECTANGULAR FERRULES
    I.S. EN 61753-031-6:2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 031-6: NON-CONNECTORIZED SINGLE-MODE 1XN AND 2XN NON-WAVELENGTHSELECTIVE BRANCHING DEVICES FOR CATEGORY O - UNCONTROLLED ENVIRONMENT
    BS EN 50377-3-1:2008 Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type SG terminated on IEC 60793-2-10 category A1a, A1b or equivalent multimode fibre for category C
    CEI EN 62343-1-3 : 2014 DYNAMIC MODULES - PART 1-3: PERFORMANCE STANDARDS - DYNAMIC GAIN TILT EQUALIZER (NON-CONNECTORIZED)
    I.S. EN 61753-091-2:2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 091-2: NON-CONNECTORIZED SINGLE-MODE FIBRE OPTIC PIGTAILED CIRCULATORS FOR CATEGORY C - CONTROLLED ENVIRONMENT (IEC 61753-091-2:2012 (EQV))
    IEC PAS 62005-9-2:2003 Fibre optic interconnecting devices and passive components - Reliability of fibre optic interconnecting devices and passive optical components - Part 9-2: Reliability qualification for fibre optic connectors
    NF EN 61753-111-8 : 2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 111-8: SEALED CLOSURES FOR CATEGORY G - GROUND
    NF EN 61753-111-9 : 2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 111-9: CLOSURES FOR CATEGORY S - SUBTERRANEAN
    UNE-EN 62005-9-1:2016 Fibre optic interconnecting devices and passive components - Reliability - Part 9-1: Qualification of passive optical components
    IEC 61753-042-2:2014 Fibre optic interconnecting devices and passive components - Performance standard - Part 042-2: Plug-pigtail-style and plug-receptacle-style of OTDR reflecting devices for category C - Controlled environments
    IEC 61753-087-6:2012 Fibre optic interconnecting devices and passive components - Performance standard - Part 087-6: Non-connectorised single-mode bidirectional 1 310 nm upstream and 1 490 nm downstream WWDM devices for category O - Uncontrolled environment
    IEC 61755-3-5:2006 Fibre optic connector optical interfaces - Part 3-5: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre
    EN 50377-13-2:2011 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 13-2: Type LX.5-PC DUPLEX terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U
    EN 61755-3-1:2009 Fibre optic connector optical interfaces - Part 3-1: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia PC ferrule, single mode fibre
    EN 50411-3-5:2015 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 3-5: Wall outlet
    EN 50377-17-2:2015 Connector sets and Interconnect components to be used in optical fibre communication systems - Product specifications - Part 17-2: Type FPFT (factory polished field terminated) simplex connector factory terminated with EN 60793-2-50 category B1.3 fibre and field mounted onto reinforced cable containing IEC 60793-2-50 category B1.3 or B6a1 or B6a 2 singlemode fibre (with restricted MFD), category C
    EN 61280-4-2:2014 Fibre-optic communication subsystem test procedures - Part 4-2: Installed cable plant - Single-mode attenuation and optical return loss measurement
    EN 61758-1:2008 Fibre optic interconnecting devices and passive components - Interface standard for closures - Part 1: General and guidance
    EN 61754-24-21 : 2009 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 24-21: TYPE SC-RJ CONNECTORS WITH PROTECTIVE HOUSINGS BASED ON IEC 61076-3-106, VARIANT 06
    EN 61753-021-2:2008 Fibre optic interconnecting devices and passive components performance standard - Part 021-2: Grade C/3 single-mode fibre optic connectors for category C - Controlled environment
    EN 50377-9-2:2004 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 9-2: Type MT-RJ terminated on IEC 60793-2 category B1.1 singlemode fibre
    EN 50377-2-2 : 2009 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 2-2: FC/APC 8 terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule, category C
    EN 50377-8-4:2007 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-4: LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, composite ferrule category U
    EN 61755-3-32:2016 Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 3-32: Connector parameters of non-dispersion shifted single mode physically contacting fibres - Angled thermoset epoxy rectangular ferrules
    EN 61300-2-35:2014 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-35: Tests - Cable nutation
    EN 62134-1:2009 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CLOSURES - PART 1: GENERIC SPECIFICATION
    EN 61753-143-2:2013 Fibre optic interconnecting devices and passive components - Performance standard - Part 143-2: Optical passive VIPA-based dispersion compensator of single-mode fibre transmission for category C - Controlled environment
    EN 62343-3-3:2014 Dynamic modules - Part 3-3: Performance specification templates - Wavelength selective switches
    EN 61753-087-6:2012 Fibre optic interconnecting devices and passive components - Performance standard - Part 087-6: Non-connectorised single-mode bidirectional 1310 nm upstream and 1490 nm downstream WWDM devices for category O - Uncontrolled environment
    EN 61755-3-8:2009 Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces - Part 3-8: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-APC composite ferrule using titanium as fibre surrounding material, single mode fibre
    EN 50377-8-10:2010 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-10: Type LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category C
    EN 50377-4-2:2011 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 4-2: Type SC/APC simplex 8° terminated on IEC 60793-2-50 of types B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U
    EN 61753-031-3:2015 Fibre optic interconnecting devices and passive components - Performance standard - Part 031-3: Non-connectorized single-mode 1×N and 2×N non-wavelength-selective branching devices for Category U - Uncontrolled environment
    EN 61300-2-55:2017 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-55: Tests - Strength of mounted adaptor
    EN 61753-141-2:2011 Fibre optic interconnecting devices and passive components - Performance standard - Part 141-2: Fibre optic passive chromatic dispersion compensator using single-mode dispersion compensating fibre for category C - Controlled environments
    EN 61300-2-6:2011 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-6: Tests - Tensile strength of coupling mechanism
    EN 61753-131-3:2011 Fibre optic interconnecting devices and passive components - Performance standard - Part 131-3: Single-mode mechanical fibre splice for category U - Uncontrolled environment
    EN 50377-8-9:2007 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-9: LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U
    EN 61755-3-10:2017 Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 3-10: Connector parameters of non-dispersion shifted single mode physically contacting fibres - Non-angled, ferrule-less, bore alignment connectors
    EN 50411-3-8:2016 Fibre organizers and closures to be used in optical fibre communication systems - Product specifications - Part 3-8: Fibre management system, terminal equipment box type 1 for category C
    EN 61300-2-33:2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-33: Tests - Assembly and disassembly of fibre optic mechanical splices, fibre management systems and closures
    EN 61753-111-9:2010 Fibre optic interconnecting devices and passive components - Performance standard - Part 111-9: Sealed closures for category S - Subterranean
    EN 61755-3-7:2009 Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces - Part 3-7: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical PC composite ferrule using titanium as fibre surrounding material, single mode fibre
    EN 61753-121-2:2017 Fibre optic interconnecting devices and passive components - Performance standard - Part 121-2: Simplex and duplex cords with single-mode fibre and cylindrical ferrule connectors for category C - Controlled environment
    EN 50516-2-1 : 2011 INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-1: TYPE ODVA PC INDUSTRIAL TERMINATED ON EN 60793-2-10 CATEGORY A1A AND A1B MULTIMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY 1 (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN EN 50173-1 AND IEC 61753-1-3
    EN 50377-11-1:2008 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 11-1: Type MF terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre for category C
    EN 61753-021-3:2013 Fibre optic interconnecting devices and passive components - Performance standard - Part 021-3: Single-mode fibre optic connectors for category U - Uncontrolled environment
    EN 60874-1:2012 Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1: Generic specification
    EN 50411-3-6:2013 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 3-6: Multimode mechanical fibre splice for use in an outdoor protected environment (Cat U)
    EN 61300-2-47:2016 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-47: Tests - Thermal shocks
    EN 61753-031-2:2014 Fibre optic interconnecting devices and passive components - Performance standard - Part 031-2: Non-connectorized single-mode 1×N and 2×N non-wavelength-selective branching devices for Category C - Controlled environment
    EN 62496-3-1:2010 Optical circuit boards - Performance standard - Part 3-1: Flexible optical circuit boards using unconnectorized optical glass fibres
    EN 61753-382-2:2016 Fibre optic interconnecting devices and passive components - Performance standard - Part 382-2: Non-connectorized single-mode bidirectional G-PON-NGA WWDM devices for category C - Controlled environment
    EN 62496-3:2011 Optical circuit boards - Part 3: Performance standards - General and guidance
    EN 61753-084-2:2008 Fibre optic interconnecting devices and passive components performance standard - Part 084-2: Non connectorised single-mode 980/1550 nm WWDM devices for category C - Controlled environment
    EN 50377-13-3:2011 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 13-3: Type LX.5-APC DUPLEX terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U
    EN 61753-031-6:2014 Fibre optic interconnecting devices and passive components - Performance standard - Part 031-6: Non-connectorized single-mode 1xN and 2xN non-wavelength-selective branching devices for Category O - Uncontrolled environment
    EN 61753-091-2:2013 Fibre optic interconnecting devices and passive components - Performance standard - Part 091-2: Non-connectorized single-mode fibre optic pigtailed circulators for category C - Controlled environment
    EN 61753-101-3:2008 Fibre optic interconnecting devices and passive components performance standard - Part 101-3: Fibre management systems for Category U - Uncontrolled environment
    EN 61753-022-2:2013 Fibre optic interconnecting devices and passive components - Performance standard - Part 022-2: Fibre optic connectors terminated on multimode fibre for category C - Controlled environment
    EN 61753-086-2:2009 Fibre optic interconnecting devices and passive components performance standard - Part 086-2: Non-connectorised single-mode bidirectional 1490 / 1550 nm downstream 1310 nm upstream WWDM devices for category C - Controlled environment
    EN 50411-2-9:2010 Fibre organisers and closures to be used in optical fibre communications systems - Product specifications - Part 2-9: Non-sealed closures for air blown fibre microduct cable, for category S & A
    EN 60794-2-22:2017 Optical fibre cables - Part 2-22: Indoor cables - Detail specification for multi-simplex breakout optical cables to be terminated with connectors
    EN 50411-3-2:2011 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 3-2: Singlemode mechanical fibre splice
    EN 50377-15-1:2011 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 15-1: Type MPO with 12-fibre PPS ferrules terminated on IEC 60793-2 category A1a multimode fibre for 50/125 micron multimode fibre
    EN 62343-1-3:2013 Dynamic modules - Part 1-3: Performance standards - Dynamic gain tilt equalizer (non-connectorized)
    EN 61753-111-7:2010 Fibre optic interconnecting devices and passive components - Performance standard - Part 111-7: Sealed closures for category A - Aerial
    NF EN 61755-1 : 2006 FIBRE OPTIC CONNECTOR OPTICAL INTERFACES - PART 1: OPTICAL INTERFACES FOR SINGLE MODE NON-DISPERSION SHIFTED FIBRES - GENERAL AND GUIDANCE
    I.S. EN 50411-2-9:2010 FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATIONS SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-9: NON-SEALED CLOSURES FOR AIR BLOWN FIBRE MICRODUCT CABLE, FOR CATEGORY S & A
    I.S. EN 61753-086-2:2009 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 086-2: NON-CONNECTORISED SINGLE-MODE BIDIRECTIONAL 1490/1550 NM DOWNSTREAM 1310 NM UPSTREAM WWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT
    CEI EN 50377-8-9 : 2009 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-9: LSH-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U
    12/30272496 DC BS EN 61755-1. Fibre optic interconnecting devices and passive components. Fibre optic connector optical interfaces. Optical interfaces for single mode non-dispersion shifted fibres. General and guidance
    CEI EN 61755-3-1 : 2010 FIBRE OPTIC CONNECTOR OPTICAL INTERFACES - PART 3-1: OPTICAL INTERFACE, 2.5 MM AND 1.25 MM DIAMETER CYLINDRICAL FULL ZIRCONIA PC FERRULE, SINGLE MODE FIBRE
    08/30190093 DC : DRAFT SEP 2008 BS EN 50377-7-4 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 7-4: LC-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLE MODE FIBRE WITH FULL ZIRCONIA FERRULE FOR CATEGORY C
    BS EN 61753-381-6:2016 Fibre optic interconnecting devices and passive components. Performance standard Cyclic arrayed waveguide grating. Category O (uncontrolled environment)
    BS EN 61755-3-1:2009 Fibre optic connector optical interfaces Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia PC ferrule, single mode fibre
    BS EN 50377-17-1:2013 Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type FPFT (factory polished field terminated) simplex connector factory terminated with EN 60793-2-50 category B1.3 fibre and field mounted onto IEC 60793-2-50 category B1.3 or B6a_1 or B6a_2 singlemode fibre, category C
    10/30212969 DC : 0 BS EN 62343 - DYNAMIC MODULES - GENERAL AND GUIDANCE
    BS EN 62496-3-1:2010 Optical circuit boards. Performance standard Flexible optical circuit boards using unconnectorized optical glass fibres
    17/30352108 DC : 0 BS EN 62343-3-4 - DYNAMIC MODULES - PART 3-4: PERFORMANCE SPECIFICATION TEMPLATES - MULTICAST OPTICAL SWITCHES
    I.S. EN 50377-10-1:2007 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 10-1: TYPE MU-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY C
    BS EN 61753-021-2:2008 Fibre optic interconnecting devices and passive components performance standard Grade C/3 single-mode fibre optic connectors for category C. Controlled environment
    I.S. EN 61753-088-2:2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 088-2: NON-CONNECTORIZED SINGLE-MODE FIBRE OPTIC LAN WDM DEVICES WITH CHANNEL SPACING OF 800 GHZ FOR CATEGORY C - CONTROLLED ENVIRONMENTS (IEC 61753-088-2:2013 (EQV))
    I.S. EN 50411-3-2:2011 FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-2: SINGLEMODE MECHANICAL FIBRE SPLICE
    02/210340 DC : DRAFT JAN 2003 EN 50377-9-2 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 9-2: TYPE MT-RJ TERMINATED ON IEC 60793-2 CATEGORY B1.1 SINGLEMODE FIBRE
    14/30295213 DC : 0 BS EN 61753-382-2 1.0 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 382-2: NON-CONNECTORISED SINGLE-MODE BIDIRECTIONAL G-PON-NGA WWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT
    NF EN 61753-111-7 : 2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 111-7: SEALED CLOSURES FOR CATEGORY A - AERIAL
    BS EN 50411-3-3:2011 Fibre organisers and closures to be used in optical fibre communication systems. Product specifications Singlemode optical fibre fusion splice protectors
    BS EN 62005-9-1:2015 Fibre optic interconnecting devices and passive components. Reliability Qualification of passive optical components
    10/30216926 DC : 0 BS EN 50411-3-3 - FIRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATION - PART 3-3: SINGLEMODE OPTICAL FIBRE FUSION SPLICE PROTECTORS
    11/30248951 DC : 0 BS EN 50411-2-2 - FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-2: SEALED PAN FIBRE SPLICE CLOSURES TYPE 1, FOR CATEGORY S & A
    BS EN 50411-3-8:2016 Fibre organizers and closures to be used in optical fibre communication systems. Product specifications Fibre management system, terminal equipment box type 1 for category C
    10/30235439 DC : 0 BS EN 61755-1-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR OPTICAL INTERFACES - PART 1-1: OPTICAL INTERFACES FOR 50.0 UM MULTIMODE FIBRE - GENERAL AND GUIDANCE
    BS EN 60794-2-22:2017 Optical fibre cables Indoor cables. Detail specification for multi-simplex breakout optical cables to be terminated with connectors
    I.S. EN 50377-16-1:2011 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 16-1: TYPE LF3 APC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY C
    BS EN 50377-8-12:2010 Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category U
    11/30248954 DC : 0 BS EN 50411-2-3 - FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-3: SEALED IN LINE FIBRE SPLICE CLOSURES TYPE 1, FOR CATEGORY S & A
    06/30156187 DC : DRAFT SEP 2006 BS EN 61753-121-2 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - TERMINATED CABLE ASSEMBLIES PART - PART 121-2: PERFORMANCE STANDARD FOR SIMPLEX AND DUPLEX CORDS WITH SINGLEMODE FIBRE OPTIC CYLINDRICAL FERRULE CONNECTORS FOR CATEGORY C - CONTROLLED ENVIRONMENT
    BS EN 61753-382-2:2016 Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode bidirectional G-PON-NGA WWDM devices for category C. Controlled environment
    BS EN 61753-111-7:2010 Fibre optic interconnecting devices and passive components performance standard Sealed closures for category A. Aerial
    IEC 62005-9-2:2007 Reliability of fibre optic interconnecting devices and passive optical components - Part 9-2: Reliability qualification for single fibre optic connector sets - Single mode
    PD IEC/TR 61292-1:2009 Optical amplifiers Parameters of amplifier components
    BS EN 61753-101-3:2009 Fibre optic interconnecting devices and passive components performance standard Fibre management systems for category U. Uncontrolled environment
    BS EN 50411-3-2:2011 Fibre organisers and closures to be used in optical fibre communication systems. Product specifications Singlemode mechanical fibre splice
    BS EN 50377-8-8:2007 Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U
    BS EN 61753-041-2:2014 Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode OTDR reflecting device for category C. Controlled environment
    BS EN 50411-2-8:2009 Fibre organisers and closures to be used in optical fibre communication systems. Product specifications Microduct connectors, for air blown optical fibres, Type 1
    14/30262209 DC : 0 BS EN 50411-3-8 - FIBRE ORGANIZERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-8: FIBRE MANAGEMENT SYSTEM, TERMINAL EQUIPMENT BOX TYPE 1 FOR CATEGORY C
    15/30326437 DC : 0 BS EN 62343-3-1 - DYNAMIC MODULES - PART 3-1: PERFORMANCE SPECIFICATION TEMPLATES - DYNAMIC CHANNEL EQUALIZERS
    PD IEC/TR 62343-6-1:2011 Dynamic modules Dynamic channel equalizers
    CEI EN 62343-2 : 2015 DYNAMIC MODULES - PART 2: RELIABILITY QUALIFICATION
    CEI EN 50411-3-3 : 2012 FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-3: SINGLEMODE OPTICAL FIBRE FUSION SPLICE PROTECTORS
    04/30126747 DC : DRAFT DEC 2004 IEC 60874-1 ED.5 - CONNECTORS FOR OPTICAL FIBRES AND CABLES - PART 1: GENERIC SPECIFICATION
    BS EN 62343-3-3:2014 Dynamic modules Performance specification templates. Wavelength selective switches
    11/30244755 DC : 0 BS EN 61753-041-2 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 041-2: NON-CONNECTORISED SINGLE-MODE FTTX REFLECTOR DEVICE FOR CATEGORY C - CONTROLLED ENVIRONMENT
    CEI EN 61300-2-33 : 2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-33: TESTS - ASSEMBLY AND DISASSEMBLY OF FIBRE OPTIC MECHANICAL SPLICES, FIBRE MANAGEMENT SYSTEMS AND CLOSURES
    I.S. EN 61300-2-6:2011 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-6: TESTS - TENSILE STRENGTH OF COUPLING MECHANISM
    NF EN 62496-3 : 2011 OPTICAL CIRCUIT BOARDS - PART 3: PERFORMANCE STANDARDS - GENERAL AND GUIDANCE
    EN 61753-111-8:2010 Fibre optic interconnecting devices and passive components - Performance standard - Part 111-8: Sealed closures for category G - Ground
    BS EN 61753-031-2:2014 Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode 1xN and 2xN non-wavelength-selective branching devices for Category C. Controlled environment
    BS EN 61753-089-2:2013 Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode bidirectional OTDR monitoring WWDM devices for category C. Controlled environment
    BS EN 50377-11-1:2008 Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type MF terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre for category C
    BS EN 50377-4-4:2011 Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type SC-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U
    15/30298191 DC : 0 BS EN 61300-2-47 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-47: TESTS - THERMAL SHOCKS
    11/30222624 DC : 0 BS EN 61753-059-2 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 059-2: SINGLE MODE FIBRE PLUG-RECEPTACLE-RECEPTACLE STYLE OPTICAL POWER LIMITER FOR CATEGORY C - CONTROLLED ENVIRONMENT
    BS EN 50377-4-2:2011 Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type SC/APC simplex 8° terminated on IEC 60793-2-50 of types B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U
    BS EN 50377-8-9:2007 Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U
    10/30218221 DC : 0 BS EN 61314-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC FAN-OUTS - PART 1: GENERIC SPECIFICATION
    BS EN 50377-10-1:2007 Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type MU-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category C
    BS EN 62149-5:2011 Fibre optic active components and devices. Performance standards ATM-PON transceivers with LD driver and CDR ICs
    09/30214398 DC : 0 BS EN 61753-057-2 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 057-2: SINGLE MODE FIBRE PLUG STYLE OPTICAL FUSE FOR CATEGORY C CONTROLLED ENVIRONMENT
    10/30238266 DC : 0 BS EN 61753-031-6 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 031-6: NON-CONNECTORISED SINGLE-MODE 1XN AND 2XN NON-WAVELENGTH-SELECTIVE BRANCHING DEVICES FOR CATEGORY O - UNCONTROLLED ENVIRONMENT
    BS EN 50411-2:2008 Fibre organisers and closures to be used in optical fibre communication systems. Product specifications General and guidance for optical fibre cable joint closures, protected microduct closures, and microduct connectors
    BS EN 61753-031-3:2015 Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode 1×N and 2×N non-wavelength-selective branching devices for Category U. Uncontrolled environment
    CEI EN 50551-2 : 2014 SIMPLEX AND DUPLEX CABLES TO BE USED FOR CORDS - PART 2: DETAILED SPECIFICATION AND MINIMUM REQUIREMENTS FOR A 3,0 MM SIMPLEX RUGGEDISED SINGLE MODE FIBRE CABLE TO BE USED FOR PATCHCORDS/CORDS CATEGORY U
    PREN 50411-2-3 : DRAFT 2011 FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-3: SEALED INLINE FIBRE SPLICE CLOSURES TYPE 1, FOR CATEGORY S & A
    CEI EN 61753-087-2 : 2012 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 087-2: NON-CONNECTORISED SINGLE-MODE BIDIRECTIONAL 1310 NM UPSTREAM AND 1490 NM DOWNSTREAM WWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT
    CEI CLC/TR 50378-2-2 : 2011 PASSIVE COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-2: SC(SC2)-APC CONNECTOR-TYPE FIXED OPTICAL ATTENUATORS USING IEC 60793-2 CATEGORY B1.1 SINGLEMODE FIBRE
    08/30189753 DC : DRAFT SEP 2008 BS EN 50377-13-2 - CONNECTORS SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 13-2: TYPE LX.5-PC DUPLEX TERMINATED ON EN 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U
    CEI EN 61753-086-6 : 2012 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 086-6: NON-CONNECTORISED SINGLE-MODE BIDIRECTIONAL 1490/1550 NM DOWNSTREAM AND 1310 NM UPSTREAM WWDM DEVICES FOR CATEGORY O - UNCONTROLLED ENVIRONMENT
    CEI EN 61753-131-3 : 2012 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 131-3: SINGLEMODE MECHANICAL FIBRE SPLICE FOR CATEGORY U - UNCONTROLLED ENVIRONMENT
    CEI EN 61755-3-7 : 2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR OPTICAL INTERFACES - PART 3-7: OPTICAL INTERFACE, 2.5 MM AND 1.25 MM DIAMETER CYLINDRICAL PC COMPOSITE FERRULE USING TITANIUM AS FIBRE SURROUNDING MATERIAL, SINGLE MODE FIBRE
    IEC PAS 61755-3-32:2007 Fibre optic connector optical interfaces - Part 3-32: Optical interface - 8 degrees angled-PC end-face thermoset rectangular ferrule, single mode fibres
    CEI EN 61753-091-2 : 2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 091-2: NON-CONNECTORISED SINGLE-MODE FIBRE OPTIC PIGTAILED CIRCULATORS FOR CATEGORY C - CONTROLLED ENVIRONMENT
    CEI EN 50377-2-2 : 2010 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-2: FC/APC 8 TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE, CATEGORY C
    CEI EN 50411-2-2 : 2013 FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-2: SEALED PAN FIBRE SPLICE CLOSURES TYPE 1, FOR CATEGORY S & A
    I.S. EN 62134-1:2009 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CLOSURES - PART 1: GENERIC SPECIFICATION
    I.S. EN 50411-3-5:2015 FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-5: WALL OUTLET
    I.S. EN 61300-2-47:2016 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-47: TESTS - THERMAL SHOCKS
    I.S. EN 62005-9-1:2015 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - RELIABILITY - PART 9-1: QUALIFICATION OF PASSIVE OPTICAL COMPONENTS
    BS EN 61755-3-6 : 2006 FIBRE OPTIC CONNECTOR OPTICAL INTERFACES - PART 3-6: OPTICAL INTERFACE - 2,5 MM AND 1,25 MM DIAMETER CYLINDRICAL 8 DEGREES ANGLED-PC COMPOSITE FERRULE USING CU-NI-ALLOY AS FIBRE SURROUNDING MATERIAL, SINGLE MODE FIBRE
    I.S. EN 61754-24-21:2009 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 24-21: TYPE SC-RJ CONNECTORS WITH PROTECTIVE HOUSINGS BASED ON IEC 61076-3-106, VARIANT 06
    S.R. CLC/TR 50378-2-1:2008 PASSIVE COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-1: SC(SC2)-PC CONNECTOR-TYPE FIXED OPTICAL ATTENUATORS USING IEC 60793-2 CATEGORY B1.1 SINGLEMODE FIBRE
    I.S. EN 61753-111-8:2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 111-8: SEALED CLOSURES FOR CATEGORY G - GROUND
    I.S. EN 61753-071-2:2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 071-2: NON-CONNECTORIZED SINGLE-MODE FIBRE OPTIC 1 X 2 AND 2 X 2 SPATIAL SWITCHES FOR CATEGORY C - CONTROLLED ENVIRONMENTS
    I.S. EN 61753-021-6:2008 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 021-6: GRADE B/2 SINGLE-MODE FIBRE OPTIC CONNECTORS FOR CATEGORY O - UNCONTROLLED ENVIRONMENT
    I.S. EN 50411-2-3:2012 FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-3: SEALED INLINE FIBRE SPLICE CLOSURES TYPE 1, FOR CATEGORY S & A
    CEI EN 50377-8-4 : 2008 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-4: LSH-APC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, COMPOSITE FERRULE CATEGORY U
    I.S. EN 61753-087-6:2012 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 087-6: NON-CONNECTORISED SINGLE-MODE BIDIRECTIONAL 1310 NM UPSTREAM AND 1490 NM DOWNSTREAM WWDM DEVICES FOR CATEGORY O - UNCONTROLLED ENVIRONMENT (IEC 61753-087-6:2012 (EQV))
    I.S. EN 50377-14-1:2011 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 14-1: CORDS WITH IEC 60793-2-50 SINGLEMODE CATEGORY B1.1 AND B1.3 FIBRE FOR CATEGORY C
    TS 100 671 : 1.3.1 TRANSMISSION AND MULTIPLEXING (TM); PASSIVE OPTICAL COMPONENTS; OPTICAL FIBRE CONNECTORS FOR SINGLE MODE OPTICAL FIBRE COMMUNICATION SYSTEMS; COMMON REQUIREMENTS AND CONFORMANCE TESTING
    CEI EN 61753-143-2 : 2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 143-2: OPTICAL PASSIVE VIPA-BASED DISPERSION COMPENSATOR OF SINGLE-MODE FIBRE TRANSMISSION FOR CATEGORY C - CONTROLLED ENVIRONMENTS
    CEI EN 50377-8-6 : 2009 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-6: LSH-HR SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY C
    IEC TR 60825-17:2015 Safety of laser products - Part 17: Safety aspects for use of passive optical components and optical cables in high power optical fibre communication systems
    I.S. EN 50411-2-2:2012 FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-2: SEALED PAN FIBRE SPLICE CLOSURES TYPE 1, FOR CATEGORY S & A
    IEC 62343-3-1:2016 Dynamic modules - Part 3-1: Performance specification templates - Dynamic channel equalizers
    BS EN 61300-2-55:2017 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Tests. Strength of mounted adaptor
    CEI EN 61753-121-3 : 2012 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARDS - PART 121-3: SIMPLEX AND DUPLEX CORDS WITH SINGLEMODE FIBRE AND CYLINDRICAL FERRULE CONNECTORS FOR CATEGORY U - UNCONTROLLED ENVIRONMENT
    CEI EN 50411-3-6 : 2014 FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-6: MULTIMODE MECHANICAL FIBRE SPLICE FOR USE IN AN OUTDOOR PROTECTED ENVIRONMENT (CAT U)
    I.S. EN 61753-041-2:2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 041-2: NON-CONNECTORIZED SINGLE-MODE OTDR REFLECTING DEVICE FOR CATEGORY C - CONTROLLED ENVIRONMENT
    08/30195630 DC : 0 BS EN 50377-8-13 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-13: TYPE LSH-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLE MODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY U
    BS EN 62343-3-1:2010 Dynamic modules Performance specification templates. Dynamic channel equalizers
    08/30171613 DC : DRAFT JUNE 2008 BS EN 61753-111-9 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 111-9: CLOSURES FOR CATEGORY S - SUBTERRANEAN
    NF EN 62149-5 : 2011 FIBER OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 5: ATM-PON TRANSCEIVERS WITH LD DRIVER AND CDR ICS
    BS EN 50516-1-1:2011 Industrial connector sets and interconnect components to be used in optical fibre control and communication systems. Product specifications Type SC-RJ PC industrial terminated on EN 60793-2-10 category A1a and A1b multimode fibre to meet the requirements of category I (industrial environments) as specified in IEC 61753-1-3
    BS EN 50377-8-3:2007 Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, composite ferrule category C
    I.S. EN 62496-3:2011 OPTICAL CIRCUIT BOARDS - PART 3: PERFORMANCE STANDARDS - GENERAL AND GUIDANCE
    BS EN 61753-086-2:2009 Fibre optic interconnecting devices and passive components performance standard Non-connectorised single-mode bidirectional 1490 / 1550 nm downstream 1310 nm upstream WWDM devices for category C. Controlled environment
    CEI EN 50377-16-1 : 2012 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 16-1: TYPE LF3 APC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLE MODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY C
    CEI EN 50516-1-1 : 2012 INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 1-1: TYPE SC-RJ PC INDUSTRIAL TERMINATED ON EN 60793-2-10 CATEGORY A1A AND A1B MULTIMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY I (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN IEC 61753-1-3
    DD IEC PAS 61753-1-3 : DRAFT 2009 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 1-3: GENERAL AND GUIDANCE FOR PERFORMANCE STANDARDS - SINGLE-MODE FIBRE OPTIC CONNECTOR PERFORMANCE FOR HARSH INDUSTRIAL OPERATING CONDITIONS
    15/30257284 DC : 0 BS EN 61753-052-6 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 052-6: SINGLE MODE FIBRE PIGTAIL STYLE FIXED ATTENUATOR FOR CATEGORY O - OUTSIDE PLANT ENVIRONMENT
    CEI EN 61300-2-12 : 2011 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-12: TESTS - IMPACT
    BS EN 50378-3-1:2007 Passive components to be used in optical fibre communication systems. Product specifications Type 100/200 GHz DWDM module terminated on IEC 60793-2-50 category B1.1 and B1.3 single mode fibre
    DD IEC PAS 61753-088-2 : DRAFT JULY 2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 088-2: NON-CONNECTORISED SINGLE-MODE FIBRE OPTIC LAN WDM DEVICES WITH CHANNEL SPACING OF 800 GHZ FOR CATEGORY C - CONTROLLED ENVIRONMENTS
    BS EN 61753-1-3:2014 Fibre optic interconnecting devices and passive components. Performance standard General and guidance for single-mode fibre optic connector and cable assembly for industrial environment, Category I
    IEC 61753-085-2:2008 Fibre optic interconnecting devices and passive components performance standard - Part 085-2: Non-connectorized single-mode pigtailed CWDM devices for category C - Controlled environment
    09/30191277 DC : DRAFT MAY 2009 BS EN 61753-087-2 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 087-2: NON-CONNECTORISED SINGLE-MODE BIDIRECTIONAL 1310 NM UPSTREAM AND 1490 NM DOWNSTREAM WWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT
    BS EN 61753-143-2:2013 Fibre optic interconnecting devices and passive components. Performance standard Optical passive VIPA-based dispersion compensator of single-mode fibre transmission for category C. Controlled environment
    BS EN 50377-13-3:2011 Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type LX.5-APC DUPLEX terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U
    06/30156211 DC : DRAFT SEP 2006 BS EN 50377-10-1 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 10-1: TYPE MU-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY C
    NF EN 61753-084-2 : 2008 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 084-2: NON CONNECTORISED SINGLEMODE 980/1550 NM WWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT
    BS EN 50411-3-1:2012 Fibre organisers and closures to be used in optical fibre communication systems. Product specifications Fibre management system, splice wall box, for category C & G
    07/30164787 DC : 0 EN 62134-1 - FIBRE OPTIC CLOSURES - PART 1: GENERIC SPECIFICATION
    NF EN 50377-11-1 : 2008 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 11-1: TYPE MF TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE FOR CATEGORY C
    14/30285749 DC : 0 BS EN 50377-17-2 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 17-2: TYPE FPFT (FACTORY POLISHED FIELD TERMINATED) SIMPLEX CONNECTOR FACTORY TERMINATED WITH EN 60793-2-50 CATEGORY B1.3 FIBRE AND FIELD MOUNTED ONTO TIGHT JACKET CABLE CONTAINING IEC 60793-2-50 CATEGORY B1.3 OR B6A1 OR B6A 2 SIN
    CEI EN 61753-121-2 : 2012 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARDS - PART 121-2: SIMPLEX AND DUPLEX CORDS WITH SINGLEMODE FIBRE AND CYLINDRICAL FERRULE CONNECTORS FOR CATEGORY C - CONTROLLED ENVIRONMENT
    I.S. EN 50377-9-1:2003 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 9-1: TYPE MT-RJ TERMINATED ON IEC 60793-2 CATEGORY A1A AND A1B MULTIMODE FIBRE
    I.S. EN 50377-2-2:2009 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-2: FC/APC 8 TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE, CATEGORY C
    11/30245080 DC : 0 BS EN 61753-031-2 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARDS - PART 031-2: NON-CONNECTORISED SINGLE-MODE 1XN AND 2XN NON-WAVELENGTH-SELECTIVE BRANCHING DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT
    13/30271356 DC : 0 BS EN 50411-3-5 - FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-5 WALL OUTLET
    13/30277252 DC : 0 BS EN 61753-053-2 ED 1.0 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 053-2: NON-CONNECTORISED SINGLE-MODE FIBRE ELECTRICALLY CONTROLLED VARIABLE OPTICAL ATTENUATOR FOR CATEGORY C - CONTROLLED ENVIRONMENTS
    BS EN 61753-121-3:2010 Fibre optic interconnecting devices and passive components. Performance standard Simplex and duplex cords with single-mode fibre and cylindrical ferrule connectors for category U. Uncontrolled environment
    BS EN 50377-8-11:2010 Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category C
    06/30156201 DC : 0 BS EN 50411-2-3 - FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-3: SEALED INLINE FIBRE SPLICE CLOSURES TYPE 1, FOR CATEGORY S AND A
    BS EN 50411-2-2:2012 Fibre organisers and closures to be used in optical fibre communication systems. Product specifications Sealed pan fibre splice closures Type 1, for category S & A
    09/30214402 DC : 0 BS EN 61753-058-2 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 058-2: SINGLE MODE FIBRE PIGTAILED STYLE OPTICAL POWER LIMITER FOR CATEGORY C CONTROLLED ENVIRONMENT
    BS EN 61755-3-31:2015 Fibre optic interconnecting devices and passive components. Connector optical interfaces Connector parameters of non-dispersion shifted single mode physically contacting fibres. Angled polyphenylene sulphide rectangular ferrules
    13/30282261 DC : 0 BS EN 61300-2-37 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-37: TESTS - CABLE BENDING FOR FIBRE OPTIC CLOSURES
    CEI EN 61300-2-6 : 2012 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-6: TESTS - TENSILE STRENGTH OF COUPLING MECHANISM
    17/30353664 DC : 0 BS EN 50377-18-1 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 18-1: TYPE 4+4X10.3125 GB/S MPO (QFSP) TRANSCEIVER MATED WITH AN MPO CONNECTOR EQUIPPED WITH 12 FIBRE PPS FERRULES TERMINATED ON EN 60793-2-10 CATEGORY A1A.3A OR A1A.3B 50/125 MICRON MULTIMODE FIBRE
    CEI EN 50411-2-9 : 2011 FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATIONS SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-9: NON-SEALED CLOSURES FOR AIR BLOWN FIBRE MICRODUCT CABLE, FOR CATEGORY S & A
    BS EN 61753-031-6:2014 Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode 1xN and 2xN non-wavelength-selective branching devices for Category O. Uncontrolled environment
    I.S. EN 61753-121-3:2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 121-3: SIMPLEX AND DUPLEX CORDS WITH SINGLE-MODE FIBRE AND CYLINDRICAL FERRULE CONNECTORS FOR CATEGORY U - UNCONTROLLED ENVIRONMENT
    CEI EN 50377-8-11 : 2012 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-11: TYPE LSH-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY C
    08/30185105 DC : DRAFT JULY 2008 BS EN 50377-15-1 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 15-1: TYPE MPO WITH PPS FERRULES TERMINATED ON IEC 60793-2 CATEGORY A1A MULTIMODE FIBRE FOR 50/125 MICRON MULTIMODE FIBRE
    I.S. EN 60874-1:2012 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - CONNECTORS FOR OPTICAL FIBRES AND CABLES - PART 1: GENERIC SPECIFICATION (IEC 60874-1:2011 (EQV))
    12/30262212 DC : 0 BS EN 50516-3-1 - INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: TYPE ODVA APC TERMINATED ON EN 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY 1 (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN EN 50173-1 AND IEC 61753-1-3
    02/210347 DC : DRAFT DEC 2002 IEC PAS 62005-9-2 ED.1 - RELIABILITY OF FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE OPTICAL COMPONENTS - PART 9-2: RELIABILITY QUALIFICATION FOR FIBRE OPTIC CONNECTORS
    16/30335717 DC : 0 BS EN 61300-2-55 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-55: TESTS - STRENGTH OF MOUNTED ADAPTOR
    11/30243242 DC : 0 BS EN 62005-9-2 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - RELIABILITY - PART 9-2: RELIABILITY QUALIFICATION FOR SINGLE FIBRE OPTIC CONNECTOR SETS - SINGLE MODE
    06/30061348 DC : DRAFT SEP 2006 ISO 13473-4 - CHARACTERISTICS OF PAVEMENT TEXTURE BY USING SURFACE PROFILES - PART 4: SPECTRAL ANALYSIS OF TEXTURE PROFILES
    BS EN 50377-13-2:2011 Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type LX.5-PC DUPLEX terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U
    BS EN 61753-021-3:2013 Fibre optic interconnecting devices and passive components. Performance standard Single-mode fibre optic connectors for category U. Uncontrolled environment
    11/30248710 DC : 0 BS EN 61753-061-2 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 061-2: NON-CONNECTORISED SINGLE-MODE FIBRE OPTIC PIGTAILED ISOLATORS FOR CATEGORY C - CONTROLLED ENVIRONMENTS
    PD IEC/TR 60825-17:2015 Safety of laser products Safety aspects for use of passive optical components and optical cables in high power optical fibre communication systems
    17/30347865 DC : 0 BS EN 50411-3-4 - FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-4: FIBRE MANAGEMENT SYSTEMS, WALL BOX FOR SPLICE TO PATCHCORD CONNECTIONS, FOR CATEGORY C AND A
    CEI EN 50411-2 : 2010 FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2: GENERAL AND GUIDANCE FOR OPTICAL FIBRE CABLE JOINT CLOSURES, PROTECTED MICRODUCT CLOSURES, AND MICRODUCT CONNECTORS
    CEI EN 61280-4-2 : 2015 FIBRE-OPTIC COMMUNICATION SUBSYSTEM TEST PROCEDURES - PART 4-2: INSTALLED CABLE PLANT - SINGLE-MODE ATTENUATION AND OPTICAL RETURN LOSS MEASUREMENT
    CEI EN 61753-087-6 : 2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 087-6: NON-CONNECTORISED SINGLE-MODE BIDIRECTIONAL 1310 NM UPSTREAM AND 1490 NM DOWNSTREAM WWDM DEVICES FOR CATEGORY O - UNCONTROLLED ENVIRONMENT
    I.S. EN 61300-2-37:2016 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-37: TESTS - CABLE BENDING FOR FIBRE OPTIC CLOSURES
    BS EN 50516-3-1:2014 Industrial connector sets and interconnect components to be used in optical fibre control and communication systems. Product specifications Type ODVA APC terminated on EN 60793-2-50 category B1.1 and B1.3 singlemode fibre to meet the requirements of category I (industrial environments) as specified in EN 50173-1 and IEC 61753-1-3
    08/30193101 DC : 0 BS EN 50377-4-2 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 4-2: TYPE SC/APC SIMPLEX 8 DEGREE TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U
    IEC 61754-24-21:2009 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 24-21: Type SC-RJ connectors with protective housings based on IEC 61076-3-106, variant 06
    14/30311375 DC : 0 BS EN 61753-121-2 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 121-2: SIMPLEX AND DUPLEX CORDS WITH SINGLE-MODE FIBRE AND CYLINDRICAL FERRULE CONNECTORS FOR CATEGORY C - CONTROLLED ENVIRONMENT
    NF EN 61753-053-2 : 2015 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 053-2: NON-CONNECTORIZED SINGLE-MODE FIBRE, ELECTRICALLY CONTROLLED, VARIABLE OPTICAL ATTENUATOR FOR CATEGORY C - CONTROLLED ENVIRONMENTS
    CEI EN 50377-13-2 : 2012 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 13-2: TYPE LX.5-PC DUPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U
    CEI EN 50377-8-12 : 2012 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-12: TYPE LSH-APC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY U
    I.S. EN 50551-2:2013 SIMPLEX AND DUPLEX CABLES TO BE USED FOR CORDS - PART 2: DETAILED SPECIFICATION AND MINIMUM REQUIREMENTS FOR A 3,0 MM SIMPLEX RUGGEDISED SINGLE MODE FIBRE CABLE TO BE USED FOR PATCHCORDS/CORDS CATEGORY U
    IEC 61300-2-12:2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-12: Tests - Impact
    NF EN 61753-086-6 : 2011 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 086-6: NON-CONNECTORISED SINGLE-MODE BIDIRECTIONAL 1490/1550 NM DOWNSTREAM AND 1310 NM UPSTREAM WWDM DEVICES FOR CATEGORY O - UNCONTROLLED ENVIRONMENT
    NF EN 50377-4-4 : 2011 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 4-4: TYPE SC-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U
    I.S. EN 50377-8-10:2010 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-10: TYPE LSH-APC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY C
    CEI EN 50516-2-1 : 2012 INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-1: TYPE ODVA PC INDUSTRIAL TERMINATED ON EN 60793-2-10 CATEGORY A1A AND A1B MULTIMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY 1 (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN EN 50173-1 AND IEC 61753-1-3
    PREN 50411-4-1 : DRAFT 2017 FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 4-1: PASSIVE OPTICAL STREET CABINET FOR CATEGORY A
    I.S. EN 61755-3-7:2009 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR OPTICAL INTERFACES - PART 3-7: OPTICAL INTERFACE, 2,5 MM AND 1,25 MM DIAMETER CYLINDRICAL PC COMPOSITE FERRULE USING TITANIUM AS FIBRE SURROUNDING MATERIAL, SINGLE MODE FIBRE
    I.S. EN 61753-131-3:2011 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 131-3: SINGLE-MODE MECHANICAL FIBRE SPLICE FOR CATEGORY U - UNCONTROLLED ENVIRONMENT
    CEI EN 61753-141-2 : 2012 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 141-2: FIBRE OPTIC PASSIVE CHROMATIC DISPERSION COMPENSATOR USING SINGLE-MODE DISPERSION COMPENSATING FIBRE FOR CATEGORY C - CONTROLLED ENVIRONMENTS
    I.S. EN 61753-086-6:2011 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 086-6: NON-CONNECTORIZED SINGLE-MODE BIDIRECTIONAL 1490/1550 NM DOWNSTREAM AND 1310 NM UPSTREAM WWDM DEVICES FOR CATEGORY O - UNCONTROLLED ENVIRONMENT
    I.S. EN 61753-381-6:2016 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 381-6: CYCLIC ARRAYED WAVEGUIDE GRATING - CATEGORY O (UNCONTROLLED ENVIRONMENT)
    CEI EN 50411-3-1 : 2013 FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: FIBRE MANAGEMENT SYSTEM, SPLICE WALL BOX, FOR CATEGORY C & G
    CEI EN 61753-111-8 : 2011 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 111-8: SEALED CLOSURES FOR CATEGORY G - GROUND
    IEC PAS 61753-1-3:2009 Fibre optic interconnecting devices and passive components performance standard - Part 1-3: General and guidance for performance standards - Single-mode fibre optic connector performance for harsh industrial operating conditions
    BS EN 61300-2-47:2010 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Tests. Thermal shocks
    CEI EN 61753-101-2 : 2007 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 101-2: FIBRE MANAGEMENT SYSTEMS FOR CATEGORY C - CONTROLLED ENVIRONMENT
    CEI EN 62496-3 : 2012 OPTICAL CIRCUIT BOARDS - PART 3: PERFORMANCE STANDARDS - GENERAL AND GUIDANCE
    I.S. EN 61753-111-9:2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 111-9: SEALED CLOSURES FOR CATEGORY S - SUBTERRANEAN
    CEI EN 50411-2-3 : 2013 FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-3: SEALED INLINE FIBRE SPLICE CLOSURES TYPE 1, FOR CATEGORY S & A
    CEI EN 61758-1 : 2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - INTERFACE STANDARD FOR CLOSURES - PART 1: GENERAL AND GUIDANCE
    I.S. EN 50516-1-1:2011 INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 1-1: TYPE SC-RJ PC INDUSTRIAL TERMINATED ON EN 60793-2-10 CATEGORY A1A AND A1B MULTIMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY I (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN IEC 61753-1-3
    ASTM F 3079 : 2014 Standard Practice for Use of Distributed Optical Fiber Sensing Systems for Monitoring the Impact of Ground Movements During Tunnel and Utility Construction on Existing Underground Utilities
    NF EN 62134-1 : 2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CLOSURES - PART 1: GENERIC SPECIFICATION
    I.S. EN 61300-2-44:2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-44: TESTS - FLEXING OF THE STRAIN RELIEF OF FIBRE OPTIC DEVICES (IEC 61300-2-44:2013 (EQV))
    EN 61755-1:2006/corrigendum:2006 FIBRE OPTIC CONNECTOR OPTICAL INTERFACES - PART 1: OPTICAL INTERFACES FOR SINGLE MODE NON-DISPERSION SHIFTED FIBRES - GENERAL AND GUIDANCE
    IEC 61755-3-8:2009 Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces- Part 3-8: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-APC composite ferrule using titanium as fibre surrounding material, single mode fibre
    IEC 61753-031-6:2014 Fibre optic interconnecting devices and passive components - Performance standard - Part 031-6: Non-connectorized single-mode 1×N and 2×N non-wavelength-selective branching devices for Category O - Uncontrolled environment
    IEC 61753-1-3:2014 Fibre optic interconnecting devices and passive components - Performance standard - Part 1-3: General and guidance for single-mode fibre optic connector and cable assembly for industrial environment, Category I
    IEC 61755-1:2005 Fibre optic connector optical interfaces - Part 1: Optical interfaces for single mode non-dispersion shifted fibres - General and guidance
    IEC 61753-053-2:2014 Fibre optic interconnecting devices and passive components - Performance standard - Part 053-2: Non-connectorized single-mode fibre, electrically controlled, variable optical attenuator for category C - Controlled environments
    IEC 60794-2-22:2016 Optical fibre cables - Part 2-22: Indoor cables - Detail specification for multi-simplex breakout optical cables to be terminated with connectors
    IEC 61753-061-2:2012 Fibre optic interconnecting devices and passive components - Performance standard - Part 061-2: Non-connectorized single-mode fibre optic pigtailed isolators for category C - Controlled environments
    EN 62149-5:2011 Fibre optic active components and devices - Performance standards - Part 5: ATM-PON transceivers with LD driver and CDR ICs
    EN 61753-061-2:2012 Fibre optic interconnecting devices and passive components - Performance standard - Part 061-2: Non-connectorized single-mode fibre optic pigtailed isolators for category C - Controlled environment
    EN 61753-071-2:2014 Fibre optic interconnecting devices and passive components - Performance standard - Part 071-2: Non-connectorized single-mode fibre optic 1 × 2 and 2 × 2 spatial switches for category C - Controlled environments
    EN 50378-3-1:2007 Passive components to be used in optical fibre communication systems - Product specifications - Part 3-1: Type: 100/200 GHz DWDM module terminated on IEC 60793-2-50 category B1.1 and B1.3 single mode fibre
    EN 61753-042-2:2014 Fibre optic interconnecting devices and passive components - Performance standard - Part 042-2: Plug-pigtail-style and plug-receptacle-style OTDR reflecting devices for category C - Controlled environments
    EN 50377-9-1:2003 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 9-1: Type MT-RJ terminated on IEC 60793-2 category A1a and A1b multimode fibre
    IEC 61755-3-6:2006+AMD1:2012 CSV Fibre optic connector optical interfaces - Part 3-6: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre
    08/30180426 DC : DRAFT MAR 2008 BS EN 62343-3-1 - DYNAMIC MODULES - PERFORMANCE SPECIFICATION TEMPLATES - PART 3-1: DYNAMIC CHANNEL EQUALIZERS
    I.S. EN 50377-6-2:2007 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 6-2: SC-RJ SINGLE MODE TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, CATEGORY U
    BS EN 50377-7-4:2011 Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications LC-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with full zirconia ferrule for category C
    BS EN 50516-2-1:2011 Industrial connector sets and interconnect components to be used in optical fibre control and communication systems. Product specifications Type ODVA PC industrial terminated on EN 60793-2-10 category A1a and A1b multimode fibre to meet the requirements of category I (industrial environments) as specified in EN 50173-1 and IEC 61753-1-3
    10/30240050 DC : DRAFT DEC 2010 BS EN 61280-4-2 - FIBRE-OPTIC COMMUNICATION SUBSYSTEM TEST PROCEDURES - PART 4-2: INSTALLED CABLE PLANT - SINGLEMODE ATTENUATION AND OPTICAL RETURN LOSS MEASUREMENT
    I.S. EN 62496-3-1:2010 OPTICAL CIRCUIT BOARDS - PERFORMANCE STANDARD - PART 3-1: FLEXIBLE OPTICAL CIRCUIT BOARDS USING UNCONNECTORIZED OPTICAL GLASS FIBRES
    I.S. EN 50411-3-6:2013 FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-6: MULTIMODE MECHANICAL FIBRE SPLICE FOR USE IN AN OUTDOOR PROTECTED ENVIRONMENT (CAT U)
    BS EN 61300-2-33:2012 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Tests. Assembly and disassembly of fibre optic mechanical splices, fibre management systems and closures
    CEI EN 50377-8-7 : 2009 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-7: LSH-PC TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY C
    CEI EN 50411-2-5 : 2010 FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-5: SEALED CLOSURES FOR AIR BLOWN FIBRE MICRODUCT, TYPE 1, FOR CATEGORY S & A
    I.S. EN 50377-8-11:2010 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-11: TYPE LSH-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY C
    I.S. EN 50377-8-2:2007 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-2: TYPE LSH-APC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, COMPOSITE FERRULE CATEGORY C
    I.S. EN 50377-7-4:2011 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 7-4: LC-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE WITH FULL ZIRCONIA FERRULE FOR CATEGORY C
    I.S. EN 50377-9-2:2004 CONNECTORS SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS; PART 9-2: TYPE MT-RJ TERMINATED ON IEC 60793-2 CATEGORY B1.1 SINGLEMODE FIBRE
    PREN 50411-2-10 : DRAFT 2013 FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-10: SEALED FIBRE SPLICE CLOSURES TYPE 2, CATEGORY G, FOR FTTH OPTICAL DISTRIBUTION NETWORKS
    10/30240333 DC : 0 BS EN 50411-3-6 - FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-6: MULTIMODE MECHANICAL FIBRE SPLICE
    BS EN 50377-8-4:2007 Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, composite ferrule category U
    NF EN 61753-087-2 : 2011 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 087-2: NON-CONNECTORISED SINGLE-MODE BIDIRECTIONAL 1310 NM UPSTREAM AND 1490 NM DOWNSTREAM WWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT
    NF EN 61753-071-2 : 2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 071-2: NON-CONNECTORIZED SINGLE-MODE FIBRE OPTIC 1 X 2 AND 2 X 2 SPATIAL SWITCHES FOR CATEGORY C - CONTROLLED ENVIRONMENTS
    11/30248302 DC : 0 BS EN 61300-2-35 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-35: TESTS - CABLE NUTATION
    11/30244353 DC : 0 BS EN 61753-123-2 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 123-2: SIMPLEX AND DUPLEX REFERENCE CORDS WITH SINGLE-MODE FIBRE AND CYLINDRICAL FERRULE CONNECTORS
    NF EN 61753-1-3 : 2016 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 1-3: GENERAL AND GUIDANCE FOR SINGLE-MODE FIBRE OPTIC CONNECTOR AND CABLE ASSEMBLY FOR INDUSTRIAL ENVIRONMENT, CATEGORY 1
    BS EN 61753-084-2:2008 Fibre optic interconnecting devices and passive components performance standard Non connectorised single-mode 980/1550 nm WWDM devices for category C. Controlled environment
    11/30248957 DC : 0 BS EN 50411-2-4 - FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-4: SEALED DOME FIBRE SPLICE CLOSURES TYPE 1, FOR CATEGORY S & A
    BS EN 62496-3:2011 Optical circuit boards Performance standards. General and guidance
    BS EN 50411-2-4:2012 Fibre organisers and closures to be used in optical fibre communication systems. Product specifications Sealed dome fibre splice closures Type 1, for category S & A
    BS EN 61280-4-2:2014 Fibre-optic communication subsystem test procedures Installed cable plant. Single-mode attenuation and optical return loss measurement
    CEI EN 61753-086-2 : 2011 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 086-2: NON-CONNECTORISED SINGLE-MODE BIDIRECTIONAL 1490 / 1550 NM DOWNSTREAM 1310 NM UPSTREAM WWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT
    CEI EN 61755-3-5 : 2007 FIBRE OPTIC CONNECTOR OPTICAL INTERFACES - PART 3-5: OPTICAL INTERFACE - 2.5 MM AND 1.25 MM DIAMETER CYLINDRICAL PC COMPOSITE FERRULE USING CU-NI-ALLOY AS FIBRE SURROUNDING MATERIAL, SINGLE MODE FIBRE
    BS EN 50377-17-2:2015 Connector sets and Interconnect components to be used in optical fibre communication systems. Product specifications Type FPFT (factory polished field terminated) simplex connector factory terminated with EN 60793-2-50 category B1.3 fibre and field mounted onto reinforced cable containing IEC 60793-2-50 category B1.3 or B6a1 or B6a 2 singlemode fibre (with restricted MFD), category C
    BS EN 50377-8-5:2007 Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, composite ferrule category U
    BS EN 61755-3-7:2009 Fibre optic interconnecting devices and passive components. Fibre optic connector optical interfaces Optical interface, 2,5 mm and 1,25 mm diameter cylindrical PC composite ferrule using titanium as fibre surrounding material, single mode fibre
    BS EN 61755-3-10:2017 Fibre optic interconnecting devices and passive components. Connector optical interfaces Connector parameters of non-dispersion shifted single mode physically contacting fibres. Non-angled, ferrule-less, bore alignment connectors
    CEI EN 50377-8-10 : 2012 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-10: TYPE LSH-APC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY C
    I.S. EN 50377-11-1:2008 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 11-1: TYPE MF TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE FOR CATEGORY C
    BS EN 50377-15-1:2011 Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type MPO with 12-fibre PPS ferrules terminated on IEC 60793-2 category A1a multimode fibre for 50/125 micron multimode fibre
    10/30228493 DC : 0 BS EN 61753-031-3 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 31-3: NON-CONNECTORISED SINGLE-MODE 1XN AND 2XN NON-WAVELENGTH WAVELENGTH-SELECTIVE BRANCHING DEVICES FOR CATEGORY U - UNCONTROLLED ENVIRONMENT
    BS EN 61753-121-2:2017 Fibre optic interconnecting devices and passive components. Performance standard Simplex and duplex cords with single-mode fibre and cylindrical ferrule connectors for category C. Controlled environment
    BS EN 50411-2-3:2012 Fibre organisers and closures to be used in optical fibre communication systems. Product specifications Sealed inline fibre splice closures Type 1, for category S & A
    BS EN 61753-111-9:2010 Fibre optic interconnecting devices and passive components performance standard Sealed closures for category S. Subterranean
    NF EN 61753-101-3 : 2008 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 101-3: FIBRE MANAGEMENT SYSTEMS FOR CATEGORY U - UNCONTROLLED ENVIRONMENT
    BS EN 61755-3-8:2009 Fibre optic interconnecting devices and passive components. Fibre optic connector optical interfaces Optical interface, 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-APC composite ferrule using titanium as fibre surrounding material, single mode fibre
    07/30170352 DC : DRAFT AUG 2007 BS EN 50411-2 - FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2: GENERAL AND GUIDANCE FOR OPTICAL FIBRE CABLE JOINT CLOSURES, PROTECTED MICRODUCT CLOSURES AND MICRODUCT CONNECTORS
    CEI EN 61274-1 : 2012 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - ADAPTORS FOR FIBRE OPTIC CONNECTORS - PART 1: GENERIC SPECIFICATION
    09/30191285 DC : DRAFT MAY 2009 BS EN 61753-086-6 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 086-6: NON-CONNECTORISED SINGLE-MODE BI-DIRECTIONAL 1490/1550 NM DOWNSTREAM AND 1310 NM UPSTREAM WWDM DEVICES FOR CATEGORY O - CONTROLLED ENVIRONMENT
    CEI CLC/TR 50378-2-1 : 2012 PASSIVE COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-1: SC(SC2)-PC CONNECTOR-TYPE FIXED OPTICAL ATTENUATORS USING IEC 60793-2 CATEGORY B1.1 SINGLEMODE FIBRE
    13/30287871 DC : 0 BS EN 61300-2-4 ED 2.0 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-4: TESTS - FIBRE/CABLE RETENTION
    BS EN 61300-2-6:2011 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Tests. Tensile strength of coupling mechanism
    10/30228177 DC : 0 BS EN 61755-3-32 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR OPTICAL INTERFACES - PART 3-32: OPTICAL INTERFACE, 8 DEGREES ANGLED PC, THERMOSET EPOXY RECTANGULAR FERRULE, SINGLE MODE FIBRES
    PD CLC/TR 50378-2-2:2008 Passive components to be used in optical fibre communication systems. Product specifications SC(SC2)-APC connector-type fixed optical attenuators using IEC 60793-2 Category B1.1 singlemode fibre
    CEI EN 50377-8-5 : 2008 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-5: LSH-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, COMPOSITE FERRULE CATEGORY U
    CEI EN 50377-15-1 : 2012 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 15-1: TYPE MPO WITH 12-FIBRE PPS FERRULES TERMINATED ON IEC 60793-2 CATEGORY A1A MULTIMODE FIBRE FOR 50/125 MICRON MULTIMODE FIBRE
    PREN 50377-14-1 : DRAFT 2017 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 14-1: SIMPLEX AND DUPLEX CORDS MADE FROM SIMPLEX PLUGS WITH CYLINDRICAL FERRULES, USING EN 60793-2-50 SINGLEMODE B1 OR B6 FIBRE FOR CATEGORY C ACCORDING TO EN 61753-1
    CEI EN 61300-2-16 : 2007 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-16: TESTS - MOULD GROWTH
    BS EN 50377-8-2:2007 Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, composite ferrule category C
    BS EN 50411-2-10:2015 Fibre organisers and closures to be used in optical fibre communication systems. Product specifications Sealed fibre splice closures type 2, category G, for FTTH optical distribution networks
    BS EN 50377-6-2:2007 Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications SC-RJ single mode terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, category U
    CEI EN 62005-9-1 : 2016 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - RELIABILITY - PART 9-1: QUALIFICATION OF PASSIVE OPTICAL COMPONENTS
    CEI EN 61753-061-2 : 2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 061-2: NON-CONNECTORIZED SINGLE-MODE FIBRE OPTIC PIGTAILED ISOLATORS FOR CATEGORY C - CONTROLLED ENVIRONMENT
    BS EN 61753-022-2:2013 Fibre optic interconnecting devices and passive components. Performance standard Fibre optic connectors terminated on multimode fibre for category C. Controlled environment
    10/30240271 DC : 0 BS EN 61300-2-33 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-33: TESTS - ASSEMBLY AND DISASSEMBLY OF FIBRE OPTIC MECHANICAL SPLICES, FIBRE MANAGEMENT SYSTEMS AND CLOSURES
    10/30227070 DC : 0 BS EN 61753-087-6 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 087-6: NON-CONNECTORISED SINGLE-MODE BIDIRECTIONAL 1310 NM UPSTREAM AND 1490 NM DOWNSTREAM WWDM DEVICES FOR CATEGORY O - UNCONTROLLED ENVIRONMENT
    BS EN 61754-24-11:2009 Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces Type SC-RJ connectors with protective housings based on IEC 61076-3-117
    06/30156204 DC : DRAFT SEP 2006 BS EN 50378-3-1 - PASSIVE COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: TYPE: 100/200 GHZ DWDM MODULE TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLE MODE FIBRE
    CEI EN 50411-2-4 : 2013 FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-4: SEALED DOME FIBRE SPLICE CLOSURES TYPE 1, FOR CATEGORY S & A
    CEI EN 61753-084-2 : 2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 084-2: NON CONNECTORISED SINGLE-MODE 980/1550 NM WWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT
    09/30214394 DC : 0 BS EN 61753-056-2 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 056-2: SINGLE MODE FIBRE PIGTAILED STYLE OPTICAL FUSE FOR CATEGORY C CONTROLLED ENVIRONMENT
    BS EN 61300-2-12:2009 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Tests. Impact
    08/30193326 DC : DRAFT NOV 2008 BS EN 50377-14-1 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 14-1: PATCH CORDS WITH EN 60793-2-50 SINGLE MODE CATEGORY B1.1 AND B1.3 FIBRE FOR CATEGORY C
    NF EN 61753-121-3 : 2011 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARDS - PART 121-3: SIMPLEX AND DUPLEX CORDS WITH SINGLE-MODE FIBRE AND CYLINDRICAL FERRULE CONNECTORS FOR CATEGORY U - UNCONTROLLED ENVIRONMENT
    I.S. EN 50377-17-1:2013 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 17-1: TYPE FPFT (FACTORY POLISHED FIELD TERMINATED) SIMPLEX CONNECTOR FACTORY TERMINATED WITH EN 60793-2-50 CATEGORY B1.3 FIBRE AND FIELD MOUNTED ONTO IEC 60793-2-50 CATEGORY B1.3 OR B6A1 OR B6A2 SINGLEMODE FIBRE, CATEGORY C
    16/30256046 DC : 0 BS EN 62005-9-4 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - RELIABILITY - PART 9-4: HIGH POWER QUALIFICATION OF PASSIVE OPTICAL COMPONENTS FOR ENVIRONMENTAL CATEGORY C
    I.S. EN 61753-381-2:2016 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 381-2: CYCLIC ARRAYED WAVEGUIDE GRATING - CATEGORY C (CONTROLLED ENVIRONMENT)
    CEI EN 50377-4-2 : 2012 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 4-2: TYPE SC/APC SIMPLEX 8 DEGREES TERMINATED ON IEC 60793-2-50 OF TYPES B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U
    CEI EN 50516-3-1 : 2014 INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: TYPE ODVA APC TERMINATED ON EN 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY 1 (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN EN 50173-1 AND IEC 61753-1-3
    I.S. EN 50516-2-1:2011 INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-1: TYPE ODVA PC INDUSTRIAL TERMINATED ON EN 60793-2-10 CATEGORY A1A AND A1B MULTIMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY I (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN EN 50173-1 AND IEC 61753-1-3
    I.S. EN 50377-13-2:2011 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 13-2: TYPE LX.5-PC DUPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U
    I.S. EN 50377-13-3:2011 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 13-3: TYPE LX.5-APC DUPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U
    I.S. EN 50411-2-10:2015 FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-10: SEALED FIBRE SPLICE CLOSURES TYPE 2, CATEGORY G, FOR FTTH OPTICAL DISTRIBUTION NETWORKS
    NF EN 61753-041-2 : 2018 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 041-2: NON-CONNECTORIZED SINGLE-MODE OTDR REFLECTING DEVICE FOR CATEGORY C - CONTROLLED ENVIRONMENT
    I.S. EN 50516-3-1:2014 INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: TYPE ODVA APC TERMINATED ON EN 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY 1 (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN EN 50173-1 AND IEC 61753-1-3
    CEI EN 61753-022-2 : 2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 022-2: FIBRE OPTIC CONNECTORS TERMINATED ON MULTIMODE FIBRE FOR CATEGORY C - CONTROLLED ENVIRONMENT
    ISO/IEC 11801-1:2017 Information technology — Generic cabling for customer premises — Part 1: General requirements
    I.S. EN 60794-2-22:2017 OPTICAL FIBRE CABLES - PART 2-22: INDOOR CABLES - DETAIL SPECIFICATION FOR MULTI-SIMPLEX BREAKOUT OPTICAL CABLES TO BE TERMINATED WITH CONNECTORS
    I.S. EN 61300-2-55:2017 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-55: TESTS - STRENGTH OF MOUNTED ADAPTOR
    I.S. EN 61755-3-10:2017 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - CONNECTOR OPTICAL INTERFACES - PART 3-10: CONNECTOR PARAMETERS OF NON-DISPERSION SHIFTED SINGLE MODE PHYSICALLY CONTACTING FIBRES - NON-ANGLED, FERRULE-LESS, BORE ALIGNMENT CONNECTORS
    I.S. EN 50377-17-2:2015 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 17-2: TYPE FPFT (FACTORY POLISHED FIELD TERMINATED) SIMPLEX CONNECTOR FACTORY TERMINATED WITH EN 60793-2-50 CATEGORY B1.3 FIBRE AND FIELD MOUNTED ONTO REINFORCED CABLE CONTAINING IEC 60793-2-50 CATEGORY B1.3 OR B6A1 OR B6A2 SINGLEMODE FIBRE
    I.S. EN 61753-042-2:2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 042-2: PLUG-PIGTAIL-STYLE AND PLUG-RECEPTACLE-STYLE OTDR REFLECTING DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENTS
    CEI EN 50377-8-2 : 2008 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-2: TYPE LSH-APC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, COMPOSITE FERRULE CATEGORY C
    I.S. EN 61753-021-3:2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 021-3: SINGLE-MODE FIBRE OPTIC CONNECTORS FOR CATEGORY U - UNCONTROLLED ENVIRONMENT (IEC 61753-021-3:2012 (EQV))
    I.S. EN 61753-1-3:2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 1-3: GENERAL AND GUIDANCE FOR SINGLE-MODE FIBRE OPTIC CONNECTOR AND CABLE ASSEMBLY FOR INDUSTRIAL ENVIRONMENT, CATEGORY 1
    IEEE 802.3-2012 IEEE Standard for Ethernet
    IEC TR 61292-1:1998 Fibre optics - Parameters of amplifier components
    CEI EN 61753-111-7 : 2011 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 111-7: SEALED CLOSURES FOR CATEGORY A - AERIA
    CEI EN 50411-3-2 : 2012 FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-2: SINGLEMODE MECHANICAL FIBRE SPLICE
    PREN 50411-2-4 : DRAFT 2011 FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-4: SEALED DOME FIBRE SPLICE CLOSURES TYPE 1, FOR CATEGORY S & A
    CEI EN 50377-4-4 : 2012 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 4-4: TYPE SC-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U
    CEI EN 61755-1 : 2006 FIBRE OPTIC CONNECTOR OPTICAL INTERFACES - PART 1: OPTICAL INTERFACES FOR SINGLE MODE NON-DISPERSION SHIFTED FIBRES - GENERAL AND GUIDANCE
    I.S. EN 61300-2-33:2012 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-33: TESTS - ASSEMBLY AND DISASSEMBLY OF FIBRE OPTIC MECHANICAL SPLICES, FIBRE MANAGEMENT SYSTEMS AND CLOSURES (IEC 61300-2-33:2012 (EQV))
    I.S. EN 61753-121-2:2017 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARDS - PART 121-2: SIMPLEX AND DUPLEX CORDS WITH SINGLE-MODE FIBRE AND CYLINDRICAL FERRULE CONNECTORS FOR CATEGORY C - CONTROLLED ENVIRONMENT
    I.S. EN 50377-8-12:2010 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-12: TYPE LSH-APC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY U
    I.S. EN 50411-2:2008 FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2: GENERAL AND GUIDANCE FOR OPTICAL FIBRE CABLE JOINT CLOSURES, PROTECTED MICRODUCT CLOSURES, AND MICRODUCT CONNECTORS
    IEC 62134-1:2009 Fibre optic interconnecting devices and passive components - Fibre optic closures - Part 1: Generic specification
    IEC 61755-3-2:2006 Fibre optic connector optical interfaces - Part 3-2: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrules for 8 degrees angled-PC single mode fibres
    I.S. EN 61755-3-1:2009 FIBRE OPTIC CONNECTOR OPTICAL INTERFACES - PART 3-1: OPTICAL INTERFACE, 2,5 MM AND 1,25 MM DIAMETER CYLINDRICAL FULL ZIRCONIA PC FERRULE, SINGLE MODE FIBRE
    UNE-EN 61300-2-47:2011 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-47: Tests - Thermal shocks
    IEC 60794-2-51:2014 Optical fibre cables - Part 2-51: Indoor cables - Detail specification for simplex and duplex cables for use in cords for controlled environment
    IEC 61753-101-2:2006 Fibre optic interconnecting devices and passive components performance standard - Part 101-2: Fibre management systems for Category C - Controlled environment
    IEC 61753-382-2:2015 Fibre optic interconnecting devices and passive components - Performance standard - Part 382-2: Non-connectorized single-mode bidirectional G-PON-NGA WWDM devices for category C - Controlled environment
    IEC 61300-2-6:2010 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-6: Tests - Tensile strength of coupling mechanism
    IEC 61753-087-2:2010 Fibre optic interconnecting devices and passive components - Performance standard - Part 087-2: Non-connectorized single-mode bidirectional 1 310 nm upstream and 1 490 nm downstream WWDM devices for category C - Controlled environment
    IEC 61753-086-2:2009 Fibre optic interconnecting devices and passive components performance standard - Part 086-2: Non-connectorized single-mode bidirectional 1490 / 1550 nm downstream 1310 nm upstream WWDM devices for category C - Controlled environment
    IEC 61753-143-2:2012 Fibre optic interconnecting devices and passive components - Performance standard - Part 143-2: Optical passive VIPA-based dispersion compensator of single-mode fibre transmission for category C - Controlled environment
    IEC 61753-088-2:2013 Fibre optic interconnecting devices and passive components - Performance standard - Part 088-2: Non-connectorized single-mode fibre optic LAN WDM devices with channel spacing of 800 GHz for category C - Controlled environments
    IEC 60874-1:2011 Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1: Generic specification
    IEC 62149-5:2009 Fibre optic active components and devices - Performance standards - Part 5: ATM-PON transceivers with LD driver and CDR ICs
    IEC 61300-2-44:2013 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices
    UNE-EN 61300-2-6:2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-6: Tests - Tensile strength of coupling mechanism
    UNE-EN 61300-2-44:2013 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices
    IEC 61753-022-2:2012 Fibre optic interconnecting devices and passive components - Performance standard - Part 022-2: Fibre optic connectors terminated on multimode fibre for category C - Controlled environment
    IEC 61753-086-6:2010 Fibre optic interconnecting devices and passive components - Performance standard - Part 086-6: Non-connectorized single-mode bidirectional 1 490 / 1 550 nm downstream and 1 310 nm upstream WWDM devices for category O - Uncontrolled environment
    IEC 61753-021-3:2012 Fibre optic interconnecting devices and passive components - Performance standard - Part 021-3: Single-mode fibre optic connectors for category U - Uncontrolled environment
    IEC 62343-1-3:2012 Dynamic modules - Part 1-3: Performance standards - Dynamic gain tilt equalizer (non-connectorized)
    IEC 61753-111-9:2009 Fibre optic interconnecting devices and passive components performance standard - Part 111-9: Sealed closures for category S - Subterranean
    IEC 61754-24-11:2009 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 24-11: Type SC-RJ connectors with protective housings based on IEC 61076-3-117
    IEC 61274-1:2011 Fibre optic interconnecting devices and passive components - Adaptors for fibre optic connectors - Part 1: Generic specification
    IEC 61753-111-8:2009 Fibre optic interconnecting devices and passive components performance standard - Part 111-8: Sealed closures for category G - Ground
    IEC 61755-3-10:2016 Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 3-10: Connector parameters of non-dispersion shifted single mode physically contacting fibres - non-angled, ferrule-less, bore alignment connectors
    IEC 61753-031-3:2014 Fibre optic interconnecting devices and passive components - Performance standard - Part 031-3: Non-connectorized single-mode 1×N and 2×N non-wavelength-selective branching devices for Category U - Uncontrolled environment
    IEC 61753-381-2:2016 Fibre optic interconnecting devices and passive components - Performance standard - Part 381-2: Cyclic arrayed waveguide grating - Category C (controlled environment)
    IEC 61300-2-37:2016 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-37: Tests - Cable bending for fibre optic closures
    IEC 61753-021-2:2007 Fibre optic interconnecting devices and passive components performance standard - Part 021-2: Grade C/3 single-mode fibre optic connectors for category C - Controlled environment
    IEC 61753-071-2:2014 Fibre optic interconnecting devices and passive components - Performance standard - Part 071-2: Non-connectorized single-mode fibre optic 1 × 2 and 2 × 2 spatial switches for category C - Controlled environments
    IEC 61753-131-3:2010 Fibre optic interconnecting devices and passive components - Performance standard - Part 131-3: Single-mode mechanical fibre splice for category U - Uncontrolled environment
    IEC 61280-4-2:2014 Fibre-optic communication subsystem test procedures - Part 4-2: Installed cable plant - Single-mode attenuation and optical return loss measurement
    IEC 61753-041-2:2014 Fibre optic interconnecting devices and passive components - Performance standard - Part 041-2: Non-connectorized single-mode OTDR reflecting device for category C - Controlled environment
    IEC 61753-111-7:2009 Fibre optic interconnecting devices and passive components performance standard - Part 111-7: Sealed closures for category A - Aerial
    IEC 61753-089-2:2013 Fibre optic interconnecting devices and passive components - Performance standard - Part 089-2: Non-connectorized single-mode bidirectional OTDR monitoring WWDM devices for category C - Controlled environment
    IEC 61300-2-47:2016 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-47: Tests - Thermal shocks
    IEC 61300-2-16:2006 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-16: Tests - Mould growth
    IEC 61755-3-7:2009 Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces - Part 3-7: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical PC composite ferrule using titanium as fibre surrounding material, single mode fibre
    IEC 62496-3:2011 Optical circuit boards - Part 3: Performance standards - General and guidance
    IEC 61753-031-2:2014 Fibre optic interconnecting devices and passive components - Performance standard - Part 031-2: Non-connectorized single-mode 1 × N and 2 × N non-wavelength-selective branching devices for Category C - Controlled environment
    IEC 61300-2-35:2014 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-35: Tests - Cable nutation
    IEC 61755-3-31:2015 Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 3-31: Connector parameters of non-dispersion shifted single mode physically contacting fibres - Angled polyphenylene sulphide rectangular ferrules
    IEC 61753-141-2:2011 Fibre optic interconnecting devices and passive components - Performance standard - Part 141-2: Fibre optic passive chromatic dispersion compensator using single-mode dispersion compensating fibre for category C - Controlled environments
    EN 50411-2-3:2012 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-3: Sealed inline fibre splice closures Type 1, for category S & A
    EN 50411-3-1:2012 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 3-1: Fibre management system, splice wall box, for category C & G
    EN 50377-8-12:2010 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-12: Type LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category U
    EN 61753-086-6 : 2011 Fibre optic interconnecting devices and passive components - Performance standard - Part 086-6: Non-connectorized single-mode bidirectional 1 490 / 1 550 nm downstream and 1 310 nm upstream WWDM devices for category O - Uncontrolled environment
    I.S. EN 50377-8-4:2007 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-4: LSH-APC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, COMPOSITE FERRULE CATEGORY U
    BS EN 62134-1:2009 Fibre optic interconnecting devices and passive components. Fibre optic closures Generic specification
    BS EN 61753-087-2:2011 Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode bidirectional 1310 nm upstream and 1490 nm downstream WWDM devices for category C. Controlled environment
    I.S. EN 50378-3-1:2007 PASSIVE COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: TYPE: 100/200 GHZ DWDM MODULE TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLE MODE FIBRE
    BS EN 61274-1:2012 Fibre optic interconnecting devices and passive components. Adaptors for fibre optic connectors Generic specification
    11/30248703 DC : 0 BS EN 61753-1-3 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 1-3: GENERAL AND GUIDANCE FOR SINGLE-MODE FIBRE OPTIC CONNECTOR AND ASSEMBLY FOR HARSH INDUSTRIAL ENVIRONMENT, CATEGORY I
    BS EN 50377-8-13:2010 Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category U
    BS EN 62343-1-3:2013 Dynamic modules Performance standards. Dynamic gain tilt equalizer (non-connectorized)
    BS EN 50551-2:2013 Simplex and duplex cables to be used for cords Detailed specification and minimum requirements for a 3,0 mm simplex ruggedised single mode fibre cable to be used for patchcords/cords category U
    I.S. EN 61753-089-2:2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 089-2: NON-CONNECTORIZED SINGLE-MODE BIDIRECTIONAL OTDR MONITORING WWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT (IEC 61753-089-2:2013 (EQV))
    I.S. EN 50377-8-13:2010 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-13: TYPE LSH-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY U
    13/30277930 DC : 0 BS EN 62343-3-3 ED 1.0 - DYNAMIC MODULES - PERFORMANCE SPECIFICATION TEMPLATES - PART 3-3: WAVELENGTH SELECTIVE SWITCHES
    10/30217980 DC : 0 BS EN 61753-122-2 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARDS - PART 122-2: SIMPLEX AND DUPLEX CORDS WITH MULTIMODE FIBRE AND CYLINDRICAL FERRULE CONNECTORS FOR CATEGORY C - CONTROLLED ENVIRONMENT
    17/30347868 DC : 0 BS EN 50411-4-1 - FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 4-1: PASSIVE OPTICAL STREET CABINET FOR CATEGORY A
    CEI EN 50377-7-4 : 2012 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 7-4: LC-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE WITH FULL ZIRCONIA FERRULE FOR CATEGORY C
    CEI EN 50411-6-1 : 2012 FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 6-1: UNPROTECTED MICRODUCT FOR CATEGORY S AND A
    11/30219060 DC : 0 BS EN 61753-071-2 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 071-2: NON-CONNECTORISED SINGLE-MODE FIBRE OPTIC 1 X 2 AND 2 X 2 SPATIAL SWITCHES FOR CATEGORY C - CONTROLLED ENVIRONMENTS
    BS EN 61753-141-2:2011 Fibre optic interconnecting devices and passive components. Performance standard Fibre optic passive chromatic dispersion compensator using single-mode dispersion compensating fibre for category C. Controlled environments
    BS EN 61753-131-3:2011 Fibre optic interconnecting devices and passive components. Performance standard Single-mode mechanical fibre splice for category U. Uncontrolled environment
    CEI EN 61755-3-10 : 1ED 2017 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - CONNECTOR OPTICAL INTERFACES - PART 3-10: CONNECTOR PARAMETERS OF NON-DISPERSION SHIFTED SINGLE MODE PHYSICALLY CONTACTING FIBRES - NON-ANGLED, FERRULE-LESS, BORE ALIGNMENT CONNECTORS
    11/30248714 DC : 0 BS EN 61753-091-2 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 091-2: NON-CONNECTORISED SINGLE-MODE FIBRE OPTIC PIGTAILED CIRCULATORS FOR CATEGORY C - CONTROLLED ENVIRONMENTS
    BS EN 61300-2-44:2013 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Tests. Flexing of the strain relief of fibre optic devices
    BS EN 50377-2-2:2009 Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications FC/APC 8 terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule, category C
    BS EN 61753-101-2:2006 Fibre optic interconnecting devices and passive components performance standard Fibre management systems for category C. Controlled environment
    IEC 61755-3-1:2006 Fibre optic connector optical interfaces - Part 3-1: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia PC ferrule, single mode fibre
    BS EN 61753-086-6:2011 Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode bidirectional 1490 / 1550 nm downstream and 1310 nm upstream WWDM devices for category O. Uncontrolled environment
    08/30178196 DC : DRAFT FEB 2008 BS EN 61753-121-3 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - TERMINATED CABLE ASSEMBLIES - PART 121-3: PERFORMANCE STANDARD FOR SIMPLEX AND DUPLEX CORDS WITH SINGLE MODE FIBRE AND CYLINDRICAL FERRULE CONNECTORS FOR CATEGORY U - UNCONTROLLED ENVIRONMENT
    10/30218225 DC : 0 BS EN 60874-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - CONNECTORS FOR OPTICAL FIBRES AND CABLES - PART 1: GENERIC SPECIFICATION
    I.S. EN 50411-3-3:2011 FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-3: SINGLEMODE OPTICAL FIBRE FUSION SPLICE PROTECTORS
    I.S. EN 61753-101-3:2008 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 101-3: FIBRE MANAGEMENT SYSTEMS FOR CATEGORY U - UNCONTROLLED ENVIRONMENT
    BS EN 61753-091-2:2013 Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode fibre optic pigtailed circulators for category C. Controlled environment
    BS EN 50411-3-6:2013 Fibre organisers and closures to be used in optical fibre communication systems. Product specifications Multimode mechanical fibre splice for use in an outdoor protected environment (Cat U)
    11/30247511 DC : 0 BS EN 61753-124-2 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PART 124-2: SIMPLEX AND DUPLEX REFERENCE CORDS WITH MULTIMODE FIBRE AND CYLINDRICAL FERRULE CONNECTORS FOR CATEGORY C - CONTROLLED ENVIRONMENT
    BS EN 61753-087-6:2012 Fibre optic interconnecting devices and passive components. Performance standard Non-connectorised single-mode bidirectional 1310 nm upstream and 1490 nm downstream WWDM devices for category O. Uncontrolled environment
    BS EN 61755-3-2:2009 Fibre optic connector optical interfaces Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrules for 8 degrees angled-PC single mode fibres
    BS EN 50411-3-5:2015 Fibre organisers and closures to be used in optical fibre communication systems. Product specifications Wall outlet
    BS EN 62343-2:2014 Dynamic modules Reliability qualification
    I.S. EN 50411-2-8:2009 FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-8: MICRODUCT CONNECTORS, FOR AIR BLOWN OPTICAL FIBRES, TYPE 1
    13/30280815 DC : 0 BS EN 62343-2 - DYNAMIC MODULES - PART 2: RELIABILITY QUALIFICATION
    10/30218213 DC : 0 BS EN 61274-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - ADAPTORS FOR FIBRE OPTIC CONNECTORS - PART 1: GENERIC SPECIFICATION
    BS EN 61300-2-37:2007 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Tests. Cable bending for fibre optic closures
    BS EN 61753-111-8:2010 Fibre optic interconnecting devices and passive components performance standard Sealed closures for category G. Ground
    BS EN 61753-042-2:2014 Fibre optic interconnecting devices and passive components. Performance standard Plug-pigtail-style and plug-receptacle-style OTDR reflecting devices for category C. Controlled environments
    I.S. EN 61753-021-2:2008 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 021-2: GRADE C/3 SINGLE-MODE FIBRE OPTIC CONNECTORS FOR CATEGORY C - CONTROLLED ENVIRONMENT
    BS EN 50411-6-1:2011 Fibre organisers and closures to be used in optical fibre communication systems. Product specifications Unprotected microduct for category S and A
    IEC PAS 61753-088-2:2010 Fibre optic interconnecting devices and passive components performance standard - Part 088-2: Non-connectorised single-mode fibre optic LAN WDM devices with channel spacing of 800 GHz for category C - Controlled environments
    PD IEC/TR 62343-6-4:2017 Dynamic modules Design guides. Reconfigurable optical add/drop multiplexer
    07/30168596 DC : 0 BS EN 61753-131-3 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 131-3: SINGLE MODE MECHANICAL FIBRE SPLICE FOR CATEGORY U - UNCONTROLLED ENVIRONMENT
    PREN 50411-2-2 : DRAFT 2011 FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-2: SEALED PAN FIBRE SPLICE CLOSURES TYPE 1, FOR CATEGORY S & A
    CEI EN 50377-11-1 : 2009 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 11-1: TYPE MF TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE FOR CATEGORY C
    CEI EN 61755-3-8 : 2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR OPTICAL INTERFACES - PART 3-8: OPTICAL INTERFACE, 2.5 MM AND 1.25 MM DIAMETER CYLINDRICAL 8 DEGREES ANGLED-APC COMPOSITE FERRULE USING TITANIUM AS FIBRE SURROUNDING MATERIAL, SINGLE MODE FIBRE
    BS EN 60874-1:2012 Fibre optic interconnecting devices and passive components. Connectors for optical fibres and cables Generic specification
    PD CLC/TR 50378-2-1:2009 Passive components to be used in optical fibre communication systems. Product specifications SC(SC2)-PC connector-type fixed optical attenuators using IEC 60793-2 Category B1.1 singlemode fibre
    CEI EN 50377-17-1 : 2013 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 17-1: TYPE FPFT (FACTORY POLISHED FIELD TERMINATED) SIMPLEX CONNECTOR FACTORY TERMINATED WITH EN 60793-2-50 CATEGORY B1.3 FIBRE AND FIELD MOUNTED ONTO IEC 60793-2-50 CATEGORY B1.3 OR B6A1 OR B6A2 SINGLEMODE FIBRE, CATEGORY C
    IEC 61753-121-2:2017 Fibre optic interconnecting devices and passive components - Performance standard - Part 121-2: Simplex and duplex cords with single-mode fibre and cylindrical ferrule connectors for category C - Controlled environment
    NF EN 61753-021-6 : 2008 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 021-6: GRADE B/2 SINGLE-MODE FIBRE OPTIC CONNECTORS FOR CATEGORY O - UNCONTROLLED ENVIRONMENT
    CEI EN 61753-089-2 : 2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 089-2: NON-CONNECTORISED SINGLE-MODE BIDIRECTIONAL OTDR MONITORING WWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT
    CEI EN 62149-5 : 2012 FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 5: ATM-PON TRANSCEIVERS WITH LD DRIVER AND CDR ICS
    I.S. EN 50411-2-5:2009 FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-5: SEALED CLOSURES FOR AIR BLOWN FIBRE MICRODUCT, TYPE 1, FOR CATEGORY S & A
    I.S. EN 61758-1:2008 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - INTERFACE STANDARD FOR CLOSURES - PART 1: GENERAL AND GUIDANCE
    I.S. EN 61753-101-2:2006 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 101-2: FIBRE MANAGEMENT SYSTEMS FOR CATEGORY C - CONTROLLED ENVIRONMENT
    NF EN 61753-089-2 : 2016 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 089-2: NON-CONNECTORIZED SINGLE-MODE BIDIRECTIONAL OTDR MONITORING WWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT
    I.S. EN 61753-084-2:2008 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 084-2: NON CONNECTORISED SINGLE-MODE 980/1550 NM WWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT
    I.S. EN 50377-8-8:2007 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-8: LSH-APC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U
    I.S. EN 50411-3-1:2012 FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: FIBRE MANAGEMENT SYSTEM, SPLICE WALL BOX, FOR CATEGORY C & G
    CEI EN 62134-1 : 2011 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CLOSURES - PART 1: GENERIC SPECIFICATION
    CEI EN 61753-088-2 : 2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 088-2: NON CONNECTORISED SINGLE-MODE FIBRE OPTIC LAN WDM DEVICES WITH CHANNEL SPACING OF 800 GHZ FOR CATEGORY C - CONTROLLED ENVIRONMENT
    I.S. EN 62343-3-3:2014 DYNAMIC MODULES - PART 3-3: PERFORMANCE SPECIFICATION TEMPLATES - WAVELENGTH SELECTIVE SWITCHES
    I.S. EN 61753-143-2:2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 143-2: OPTICAL PASSIVE VIPA-BASED DISPERSION COMPENSATOR OF SINGLE-MODE FIBRE TRANSMISSION FOR CATEGORY C - CONTROLLED ENVIRONMENT (IEC 61753-143-2:2012 (EQV))
    I.S. EN 61753-382-2:2016 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 382-2: NON-CONNECTORIZED SINGLE-MODE BIDIRECTIONAL G-PON-NGA WWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT
    I.S. EN 50377-15-1:2011 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 15-1: TYPE MPO WITH 12-FIBRE PPS FERRULES TERMINATED ON IEC 60793-2 CATEGORY A1A MULTIMODE FIBRE FOR 50/125 MICRON MULTIMODE FIBRE
    I.S. EN 50377-8-9:2007 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-9: LSH-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U
    I.S. EN 61274-1:2012 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - ADAPTORS FOR FIBRE OPTIC CONNECTORS - PART 1: GENERIC SPECIFICATION (IEC 61274-1:2011 (EQV))
    I.S. EN 61753-087-2:2011 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 087-2: NON-CONNECTORIZED SINGLE-MODE BIDIRECTIONAL 1310 NM UPSTREAM AND 1490 NM DOWNSTREAM WWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT
    I.S. EN 50411-3-8:2016 FIBRE ORGANIZERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-8: FIBRE MANAGEMENT SYSTEM, TERMINAL EQUIPMENT BOX TYPE 1 FOR CATEGORY C
    I.S. EN 60794-2-51:2014 OPTICAL FIBRE CABLES - PART 2-51: INDOOR CABLES - DETAIL SPECIFICATION FOR SIMPLEX AND DUPLEX CABLES FOR USE IN CORDS FOR CONTROLLED ENVIRONMENT
    I.S. EN 50411-2-4:2012 FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-4: SEALED DOME FIBRE SPLICE CLOSURES TYPE 1, FOR CATEGORY S & A
    I.S. EN 61755-3-8:2009 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR OPTICAL INTERFACES - PART 3-8: OPTICAL INTERFACE, 2,5 MM AND 1,25 MM DIAMETER CYLINDRICAL 8 DEGREES ANGLED-APC COMPOSITE FERRULE USING TITANIUM AS FIBRE SURROUNDING MATERIAL, SINGLE MODE FIBRE
    I.S. EN 50377-4-2:2011 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 4-2: TYPE SC/APC SIMPLEX 8 DEGREES TERMINATED ON IEC 60793-2-50 OF TYPES B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U
    I.S. EN 61755-3-2:2009 FIBRE OPTIC CONNECTOR OPTICAL INTERFACES - PART 3-2: OPTICAL INTERFACE, 2,5 MM AND 1,25 MM DIAMETER CYLINDRICAL FULL ZIRCONIA FERRULES FOR 8 DEGREES ANGLED-PC SINGLE MODE FIBRES
    NF EN 50411-3-3 : 2016 FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-3: SINGLEMODE OPTICAL FIBRE FUSION SPLICE PROTECTORS
    I.S. EN 61753-061-2:2012 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 061-2: NON-CONNECTORIZED SINGLE-MODE FIBRE OPTIC PIGTAILED ISOLATORS FOR CATEGORY C - CONTROLLED ENVIRONMENT (IEC 61753-061-2:2012 (EQV))
    CEI EN 61300-2-35 : 2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-35: TESTS - CABLE NUTATION
    I.S. EN 50377-4-4:2011 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 4-4: TYPE SC-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U
    I.S. EN 61300-2-12:2009 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-12: TESTS - IMPACT
    ISO/IEC/IEEE 8802-3:2017 Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Specific requirements Part 3: Standard for Ethernet
    I.S. EN 50377-3-1:2008 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: TYPE SG TERMINATED ON IEC 60793-2-10 CATEGORY A1A, A1B OR EQUIVALENT MULTIMODE FIBRE FOR CATEGORY C
    I.S. EN 50411-6-1:2011 FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 6-1: UNPROTECTED MICRODUCT FOR CATEGORY S AND A
    EN 61755-3-6:2006/A1:2012 Fibre optic connector optical interfaces - Part 3-6: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre
    EN 50516-1-1:2011/AC:2012 INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 1-1: TYPE SC-RJ PC INDUSTRIAL TERMINATED ON EN 60793-2-10 CATEGORY A1A AND A1B MULTIMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY I (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN IEC 61753-1-3
    IEC 61300-2-33:2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-33: Tests - Assembly and disassembly of fibre optic mechanical splices, fibre management systems and closures
    IEC 61753-084-2:2007 Fibre optic interconnecting devices and passive components performance standard - Part 084-2: Non connectorised single-mode 980/1550 nm WWDM devices for category C - Controlled environment
    IEC 61753-101-3:2006 Fibre optic interconnecting devices and passive components performance standard - Part 101-3: Fibre management systems for Category U - Uncontrolled environment
    IEC 61753-091-2:2012 Fibre optic interconnecting devices and passive components - Performance standard - Part 091-2: Non-connectorized single-mode fibre optic pigtailed circulators for category C - Controlled environments
    IEC 62496-3-1:2009 Optical circuit boards - Part 3-1: Performance standards - Flexible optical circuit boards using unconnectorized optical glass fibres
    IEC 61753-381-6:2016 Fibre optic interconnecting devices and passive components - Performance standard - Part 381-6: Cyclic arrayed waveguide grating - Category O (uncontrolled environment)
    IEC 62343-2:2014 Dynamic modules - Part 2: Reliability qualification
    IEC 61753-121-3:2010 Fibre optic interconnecting devices and passive components - Performance standard - Part 121-3: Simplex and duplex cords with single-mode fibre and cylindrical ferrule connectors for category U - Uncontrolled environment
    IEC 61753-021-6:2007 Fibre optic interconnecting devices and passive componentsperformance standard - Part 021-6: Grade B/2 single-mode fibre optic connectors for category O - Uncontrolled environment
    IEC 62005-9-1:2015 Fibre optic interconnecting devices and passive components - Reliability - Part 9-1: Qualification of passive optical components
    IEC 61755-3-32:2015 Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 3-32: Connector parameters of non-dispersion shifted single mode physically contacting fibres - Angled thermoset epoxy rectangular ferrules
    EN 61753-088-2:2013 Fibre optic interconnecting devices and passive components -Performance standard - Part 088-2: Non-connectorized single-mode fibre optic LAN WDM devices with channel spacing of 800 GHz for category C - Controlled environments
    EN 50377-8-3:2007 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-3: LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, composite ferrule category C
    EN 61753-121-3 : 2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 121-3: SIMPLEX AND DUPLEX CORDS WITH SINGLE-MODE FIBRE AND CYLINDRICAL FERRULE CONNECTORS FOR CATEGORY U - UNCONTROLLED ENVIRONMENT
    EN 50411-2-8:2009 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-8: Microduct connectors, for air blown optical fibres, Type 1
    EN 50377-14-1:2011 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 14-1: Cords with IEC 60793-2-50 singlemode category B1.1 and B1.3 fibre for category C
    EN 50377-16-1:2011 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 16-1: Type LF3 APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category C
    EN 50377-6-2:2007 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 6-2: SC-RJ single mode terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, category U
    EN 61753-381-6:2016 Fibre optic interconnecting devices and passive components - Performance standard - Part 381-6: Cyclic arrayed waveguide grating - Category O (uncontrolled environment)
    EN 61754-24-11:2009 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 24-11: Type SC-RJ connectors with protective housings based on IEC 61076-3-117
    EN 61753-053-2:2014 Fibre optic interconnecting devices and passive components - Performance standard - Part 053-2: Non-connectorized single-mode fibre, electrically controlled, variable optical attenuator for category C - Controlled environments
    EN 50411-2:2008 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2: General and guidance for optical fibre cable joint closures, protected microduct closures, and microduct connectors
    EN 50411-6-1:2011 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 6-1: Unprotected microduct for category S and A
    EN 61300-2-37:2016 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-37: Tests - Cable bending for fibre optic closures
    EN 62343-3-1:2016 Dynamic modules - Part 3-1: Performance specification templates - Dynamic channel equalizers
    EN 61753-089-2:2013 Fibre optic interconnecting devices and passive components - Performance standard - Part 089-2: Non-connectorized single-mode bidirectional OTDR monitoring WWDM devices for category C - Controlled environment
    EN 61753-101-2 : 2006 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 101-2: FIBRE MANAGEMENT SYSTEMS FOR CATEGORY C - CONTROLLED ENVIRONMENT
    EN 62343-2:2014 Dynamic modules - Part 2: Reliability qualification
    EN 50377-8-11:2010 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-11: Type LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category C
    EN 50377-7-4:2011 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 7-4: LC-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with full zirconia ferrule for category C
    EN 61300-2-44:2013 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices
    EN 50551-2:2013 Simplex and duplex cables to be used for cords - Part 2: Detailed specification and minimum requirements for a 3,0 mm simplex ruggedised single mode fibre cable to be used for patchcords/cords category U
    EN 61274-1:2012 Fibre optic interconnecting devices and passive components - Adaptors for fibre optic connectors - Part 1: Generic specification
    EN 62005-9-1:2015 Fibre optic interconnecting devices and passive components - Reliability - Part 9-1: Qualification of passive optical components
    EN 61753-381-2:2016 Fibre optic interconnecting devices and passive components - Performance standard - Part 381-2: Cyclic arrayed waveguide grating - Category C (controlled environment)
    EN 50411-2-10:2015 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-10: Sealed fibre splice closures type 2, category G, for FTTH optical distribution networks
    EN 50377-4-4:2011 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 4-4: Type SC-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U
    EN 61753-021-6:2008 Fibre optic interconnecting devices and passive components performance standard - Part 021-6: Grade B/2 single-mode fibre optic connectors for category O - Uncontrolled environment
    EN 50377-3-1:2008 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 3-1: Type SG terminated on IEC 60793-2-10 category A1a, A1b or equivalent multimode fibre for category C
    EN 61753-087-2:2011 Fibre optic interconnecting devices and passive components - Performance standard - Part 087-2: Non-connectorized single-mode bidirectional 1310 nm upstream and 1490 nm downstream WWDM devices for category C - Controlled environment
    CLC/TR 50378-2-2:2008 Passive components to be used in optical fibre communication systems - Product specifications - Part 2-2: SC(SC2)-APC connector-type fixed optical attenuators using IEC 60793-2 Category B1.1 singlemode fibre
    EN 50377-8-2:2007 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-2: Type LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, composite ferrule category C
    EN 50377-17-1 : 2013 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 17-1: TYPE FPFT (FACTORY POLISHED FIELD TERMINATED) SIMPLEX CONNECTOR FACTORY TERMINATED WITH EN 60793-2-50 CATEGORY B1.3 FIBRE AND FIELD MOUNTED ONTO IEC 60793-2-50 CATEGORY B1.3 OR B6A1 OR B6A2 SINGLEMODE FIBRE, CATEGORY C
    EN 50377-8-13:2010 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-13: Type LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category U
    CLC/TR 50378-2-1 : 2008 PASSIVE COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-1: SC(SC2)-PC CONNECTOR-TYPE FIXED OPTICAL ATTENUATORS USING IEC 60793-2 CATEGORY B1.1 SINGLEMODE FIBRE
    EN 61755-3-2:2009 Fibre optic connector optical interfaces - Part 3-2: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrules for 8 degrees angled-PC single mode fibres
    EN 50516-3-1:2014 Industrial connector sets and interconnect components to be used in optical fibre control and communication systems - Product specifications - Part 3-1: Type ODVA APC terminated on EN 60793-2-50 category B1.1 and B1.3 singlemode fibre to meet the requirements of category I (industrial environments) as specified in EN 50173-1 and IEC 61753-1-3
    EN 50377-10-1:2007 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 10-1: Type MU-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category C
    EN 61300-2-12:2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-12: Tests - Impact
    EN 61755-3-31:2015 Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 3-31: Connector parameters of non-dispersion shifted single mode physically contacting fibres - Angled polyphenylene sulphide rectangular ferrules
    EN 50377-8-5:2007 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-5: LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, composite ferrule category U
    EN 50411-3-3 : 2011 FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-3: SINGLEMODE OPTICAL FIBRE FUSION SPLICE PROTECTORS
    EN 50411-2-5:2009 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-5: Sealed closures for air blown fibre microduct, type 1, for category S & A
    EN 61753-1-3:2014 Fibre optic interconnecting devices and passive components - Performance standard - Part 1-3: General and guidance for single-mode fibre optic connector and cable assembly for industrial environment, Category I
    EN 61753-041-2:2014 Fibre optic interconnecting devices and passive components - Performance standard - Part 041-2: Non-connectorized single-mode OTDR reflecting device for category C - Controlled environment
    EN 50411-2-2:2012 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-2: Sealed pan fibre splice closures Type 1, for category S & A
    EN 60794-2-51:2014 Optical fibre cables - Part 2-51: Indoor cables - Detail specification for simplex and duplex cables for use in cords for controlled environment
    EN 50411-2-4:2012 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-4: Sealed dome fibre splice closures Type 1, for category S & A
    EN 50377-8-8:2007 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-8: LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U

    Standards Referencing This Book - (Show below) - (Hide below)

    IEC GUIDE 109:2012 Environmental aspects - Inclusion in electrotechnical product standards
    IEC 61300-2-45:1999 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-45: Tests - Durability test by water immersion
    IEC 61300-3-28:2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-28: Examinations and measurements - Transient loss
    IEC 60068-1:2013 Environmental testing - Part 1: General and guidance
    IEC 61300-2-50:2007 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-50: Tests - Fibre optic connector proof test with static load - Singlemode and multimode
    IEC 60590:1977 Determination of the aromatic hydrocarbon content of new mineral insulating oils
    IEC 61300-2-37:2016 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-37: Tests - Cable bending for fibre optic closures
    IEC 61300-2-48:2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-48: Tests - Temperature-humidity cycling
    IEC 61300-3-3:2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-3: Examinations and measurements - Active monitoring of changes in attenuation and return loss
    IEC 61300-2-1:2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-1: Tests - Vibration (sinusoidal)
    IEC 61300-2-12:2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-12: Tests - Impact
    IEC 61300-2-51:2007 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-51: Tests - Fibre optic connector test for transmission with applied tensile load - Singlemode and multimode
    IEC 61300-2-23:2010 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-23: Tests - Sealing for non-pressurized closures of fibre optic devices
    IEC 61300-2-11:2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-11: Tests - Axial compression
    IEC 61300-2-9:2017 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-9: Tests - Shock
    IEC 61300-2-49:2007 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-49: Tests - Connector installation test
    IEC 61300-2-21:2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-21: Tests - Composite temperature/humidity cyclic test
    IEC 61300-2-17:2010 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-17: Tests - Cold
    IEC 61300-2-46:2006 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-46: Tests - Damp heat, cyclic
    IEC 61300-2-5:2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-5: Tests - Torsion
    IEC 61300-3-34:2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-34: Examinations and measurements - Attenuation of random mated connectors
    IEC 61300-2-26:2006 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-26: Tests - Salt mist
    IEC 61300-2-38:2006 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-38: Tests - Sealing for pressurized fibre optic closures
    IEC 61300-2-18:2005 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-18: Tests - Dry heat - High temperature endurance
    IEC 61300-2-22:2007 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-22: Tests - Change of temperature
    IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
    IEC 61300-3-6:2008 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-6: Examinations and measurements - Return loss
    IEC 61300-2-7:2013 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-7: Tests - Bending moment
    IEC 61300-3-4:2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-4: Examinations and measurements - Attenuation
    IEC 61300-2-34:2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-34: Tests - Resistance to solvents and contaminating fluids of interconnecting components and closures
    IEC 61300-2-42:2014 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-42: Tests - Static side load for strain relief
    IEC 61300-2-33:2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-33: Tests - Assembly and disassembly of fibre optic mechanical splices, fibre management systems and closures
    IEC 61300-2-44:2013 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices
    IEC 61300-2-2:2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-2: Tests - Mating durability
    IEC 61300-2-4:1995 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre/cable retention
    IEC 61300-2-19:2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-19: Tests - Damp heat (steady state)
    IEC 61300-2-6:2010 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-6: Tests - Tensile strength of coupling mechanism
    IEC 61300-2-10:2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-10: Tests - Crush resistance
    IEC 61300-2-27:1995 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-27: Tests - Dust - Laminar flow
    IEC 61300-2-28:2013 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-28: Tests - Corrosive atmosphere (sulphur dioxide)
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective