• IEC 62366:2007+AMD1:2014 CSV

    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

    Medical devices - Application of usability engineering to medical devices

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Superseded date:  12-09-2022

    Language(s):  English - French

    Published date:  28-01-2014

    Publisher:  International Electrotechnical Committee

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    FOREWORD
    INTRODUCTION
    INTRODUCTION TO THE AMENDMENT
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 Principles
    5 USABILITY ENGINEERING PROCESS
    6 ACCOMPANYING DOCUMENT
    7 Training and materials for training
    Annex A (informative) - General guidance and rationale
    Annex B (informative) - Categories of USER action
    Annex C (informative) - Examples of USE ERRORS, ABNORMAL USE and
            possible causes
    Annex D (informative) - Guidance on the USABILITY ENGINEERING
            PROCESS
    ANNEX E (informative) - Questions that can be used to identify
            MEDICAL DEVICE characteristics associated with USABILITY
            that could impact on SAFETY
    ANNEX F (informative) - Examples of possible USABILITY related
            HAZARDOUS SITUATIONS
    Annex G (informative) - USABILITY goals: Illustrative example
            for a home parenteral infusion pump
    ANNEX H (informative) - Sample USABILITY SPECIFICATION and its
            inputs
    Annex I (informative) - Recommended reading list
    Annex J (informative) - Reference to the essential principles
    Annex K (normative) - Evaluation of a USER INTERFACE OF
            UNKNOWN PROVENANCE (UOUP)
    Bibliography
    Index of defined terms

    Abstract - (Show below) - (Hide below)

    IEC 62366:2007+A1:2014 Specifies a process for a manufacturer to analyse, specify, design, verify and validate usability, as it relates to safety of a medical device. This usability engineering process assesses and mitigates risks caused by usability problems associated with correct use and use errors, i.e. normal use. It can be used to identify but does not assess or mitigate risks associated with abnormal use. If the usability engineering process detailed in this International Standard has been complied with and the acceptance criteria documented in the usability validation plan have been met, then the residual risks, as defined in ISO 14971, associated with usability of a medical device are presumed to be acceptable, unless there is objective evidence to the contrary. This International Standard does not apply to clinical decision-making relating to the use of a medical device. This consolidated version consists of the first edition (2007) and its amendment 1 (2014). Therefore, no need to order amendment in addition to this publication.

    General Product Information - (Show below) - (Hide below)

    Committee TC 62/SC 62A
    Development Note Stability Date: 2014. (01/2014) Superseded by IEC 62366-1, but remains current and will be withdrawn on publication of IEC 62366-2. (07/2015)
    Document Type Standard
    Publisher International Electrotechnical Committee
    Status Superseded
    Superseded By

    Standards Referenced By This Book - (Show below) - (Hide below)

    DIN EN ISO 10524-4:2008-09 PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 4: LOW-PRESSURE REGULATORS
    CSA C22.2 No. 60601-2-66 : 2015 MEDICAL ELECTRICAL EQUIPMENT - PART 2-66: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HEARING INSTRUMENTS AND HEARING INSTRUMENT SYSTEMS
    I.S. EN ISO 80369-1:2010 SMALL BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 1: GENERAL REQUIREMENTS
    NF EN ISO 80601-2-69 : 2014 MEDICAL ELECTRICAL EQUIPMENT - PART 2-69: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF OXYGEN CONCENTRATOR EQUIPMENT
    ISO 14708-1:2014 Implants for surgery — Active implantable medical devices — Part 1: General requirements for safety, marking and for information to be provided by the manufacturer
    CEI EN 60601-1-11 : 2016 MEDICAL ELECTRICAL EQUIPMENT - PART 1-11: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS USED IN THE HOME HEALTHCARE ENVIRONMENT
    CSA ISO 15197 : 2015 IN VITRO DIAGNOSTIC TEST SYSTEMS - REQUIREMENTS FOR BLOOD-GLUCOSE MONITORING SYSTEMS FOR SELF-TESTING IN MANAGING DIABETES MELLITUS
    CSA ISO 5361 : 2014 ANAESTHETIC AND RESPIRATORY EQUIPMENT - TRACHEAL TUBES AND CONNECTORS
    14/30270462 DC : 0 BS EN ISO 5840-1 - CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 1: GENERAL REQUIREMENTS
    ANSI/AAMI/ISO 80369-3:2016 SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 3: CONNECTORS FOR ENTERAL APPLICATIONS
    NF EN ISO 7494-1 : 2011 DENTISTRY - DENTAL UNITS - PART 1: GENERAL REQUIREMENTS AND TEST METHODS
    BS EN ISO 5840-2:2015 Cardiovascular implants. Cardiac valve prostheses Surgically implanted heart valve substitutes
    14/30298693 DC : 0 BS ISO 18250-8 - CONNECTORS FOR RESERVOIR DELIVERY SYSTEMS FOR HEALTHCARE APPLICATIONS - PART 8: CITRATE-BASED ANTICOAGULANT SOLUTION FOR APHERESIS APPLICATIONS
    UNI EN ISO 23908 : 2013 SHARPS INJURY PROTECTION - REQUIREMENTS AND TEST METHODS - SHARPS PROTECTION FEATURES FOR SINGLE-USE HYPODERMIC NEEDLES, INTRODUCERS FOR CATHETERS AND NEEDLES USED FOR BLOOD SAMPLING
    PD IEC/TR 62366-2:2016 Medical devices Guidance on the application of usability engineering to medical devices
    AAMI ISO 80369-1 : 2010 SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 1: GENERAL REQUIREMENTS
    PD ISO/TS 17518:2015 Medical laboratories. Reagents for staining biological material. Guidance for users
    UNI EN ISO 18113-5 : 2012 IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 5: IN VITRO DIAGNOSTIC INSTRUMENTS FOR SELF- TESTING
    09/30203808 DC : 0 BS EN ISO 80601-2-12 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS
    17/30303094 DC : 0 BS EN ISO 10524-3 - PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES
    13/30268585 DC : 0 BS EN ISO 10079-1 - MEDICAL SUCTION EQUIPMENT - PART 1: ELECTRICALLY POWERED SUCTION EQUIPMENT
    13/30242951 DC : 0 BS ISO 16571 - MEDICAL GAS SYSTEMS - SYSTEMS FOR EVACUATION OF PLUME GENERATED BY MEDICAL DEVICES
    DIN EN ISO 18113-3:2013-01 IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 3: IN VITRO DIAGNOSTIC INSTRUMENTS FOR PROFESSIONAL USE (ISO 18113-3:2009)
    I.S. EN 60601-1-10:2008 MEDICAL ELECTRICAL EQUIPMENT - PART 1-10: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR THE DEVELOPMENT OF PHYSIOLOGIC CLOSED-LOOP CONTROLLERS
    13/30245306 DC : 0 BS EN ISO 9680 - DENTISTRY - OPERATING LIGHTS
    DIN EN ISO 80601-2-69 E : 2014 MEDICAL ELECTRICAL EQUIPMENT - PART 2-69: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF OXYGEN CONCENTRATOR EQUIPMENT (ISO 80601-2-69:2014)
    10/30205392 DC : 0 BS ISO 7494-1 - DENTISTRY - DENTAL UNITS - PART 1: GENERAL REQUIREMENTS AND TEST METHODS
    09/30191860 DC : 0 BS EN 60601-1-6 - MEDICAL ELECTRICAL EQUIPMENT - PART 1-6: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD - USABILITY
    I.S. EN ISO 23908:2013 SHARPS INJURY PROTECTION - REQUIREMENTS AND TEST METHODS - SHARPS PROTECTION FEATURES FOR SINGLE-USE HYPODERMIC NEEDLES, INTRODUCERS FOR CATHETERS AND NEEDLES USED FOR BLOOD SAMPLING (ISO 23908:2011)
    UNE-EN ISO 18113-3:2012 In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 3: In vitro diagnostic instruments for professional use (ISO 18113-3:2009)
    BS EN 62083:2009 Medical electrical equipment. Requirements for the safety of radiotherapy treatment planning systems
    BS EN ISO 18113-3:2011 In vitro diagnostic medical devices. Information supplied by the manufacturer (labelling) In vitro diagnostic instruments for professional use
    CSA ISO 14971 : 2007 MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES
    BIS IS/ISO 15197 : 2013 IN VITRO DIAGNOSTIC TEST SYSTEMS - REQUIREMENTS FOR BLOOD-GLUCOSE MONITORING SYSTEM FOR SELF-TESTING IN MANAGING DIABETES MELLITUS
    DIN EN ISO 5840-3:2013-06 Cardiovascular implants - Cardiac valve prostheses - Part 3: Heart valve substitutes implanted by transcatheter techniques (ISO 5840-3:2013)
    UNE-EN ISO 80601-2-69:2015 Medical electrical equipment - Part 2-69: Particular requirements for basic safety and essential performance of oxygen concentrator equipment (ISO 80601-2-69:2014)
    CAN/CSA-C22.2 NO. 80601-2-72:17 Medical electrical equipment — Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients (Adopted ISO 80601-2-72:2015, first edition, 2015-09-01, with Canadian deviations)
    ONORM EN ISO 5840-3 : 2013 CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 3: HEART VALVE SUBSTITUTES IMPLANTED BY TRANSCATHETER TECHNIQUES (ISO 5840-3:2013)
    ANSI/AAMI/ISO 5840-3:2013 CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 3: HEART VALVE SUBSTITUTES IMPLANTED BY TRANSCATHETER TECHNIQUES
    AAMI HE75 : 2009(R2013) HUMAN FACTORS ENGINEERING - DESIGN OF MEDICAL DEVICES
    AAMI ISO 5361 : 2012 ANAESTHETIC AND RESPIRATORY EQUIPMENT - TRACHEAL TUBES AND CONNECTORS
    ISO 16571:2014 Systems for evacuation of plume generated by medical devices
    I.S. EN ISO 10524-4:2008 PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 4: LOWPRESSURE REGULATORS
    I.S. EN 60601-2-66:2015 MEDICAL ELECTRICAL EQUIPMENT - PART-2-66: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HEARING INSTRUMENTS AND HEARING INSTRUMENT SYSTEMS
    BS EN ISO 80601-2-12:2011 Medical electrical equipment Particular requirements for basic safety and essential performance of critical care ventilators
    BS EN 60601-1-6 : 2010 MEDICAL ELECTRICAL EQUIPMENT - PART 1-6: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: USABILITY
    ISO/TS 17137:2014 Cardiovascular implants and extracorporeal systems Cardiovascular absorbable implants
    UNI CEI EN ISO 80369-1 : 2011 SMALL BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 1: GENERAL REQUIREMENTS
    AAMI ISO 14971 : 2007 : INC : ERR 1 : 2007 MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES
    UNE-EN ISO 18113-5:2012 In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 5: In vitro diagnostic instruments for self-testing (ISO 18113-5:2009)
    CSA C22.2 No. 60601.2.1 : 2011 MEDICAL ELECTRICAL EQUIPMENT - PART 2-1: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF ELECTRON ACCELERATORS IN THE RANGE 1 MEV TO 50 MEV
    I.S. EN 1865-2:2010 PATIENT HANDLING EQUIPMENT USED IN ROAD AMBULANCES - PART 2: POWER ASSISTED STRETCHER
    PD ISO/TS 17137:2014 Cardiovascular implants and extracorporeal systems. Cardiovascular absorbable implants
    ASTM F 2761 : 2009 : R2013 Medical Devices and Medical Systems - Essential safety requirements for equipment comprising the patient-centric integrated clinical environment (ICE) - Part 1: General requirements and conceptual model
    EN 285:2015 Sterilization - Steam sterilizers - Large sterilizers
    DIN EN ISO 9680 E : 2015 DENTISTRY - OPERATING LIGHTS (ISO 9680:2014)
    BS EN 1782 : 1998 TRACHEAL TUBES AND CONNECTORS
    ISO 10524-4:2008 Pressure regulators for use with medical gases — Part 4: Low-pressure regulators
    BS EN 13718-1:2014 Medical vehicles and their equipment. Air ambulances Requirements for medical devices used in air ambulances
    ISO 7494-2:2015 Dentistry — Stationary dental units — Part 2: Air, water, suction and wastewater systems
    UNE-EN ISO 11608-1:2015 Needle-based injection systems for medical use - Requirements and test methods - Part 1: Needle-based injection systems (ISO 11608-1:2014)
    ISO/IEEE 11073-00103:2015 Health informatics Personal health device communication Part 00103: Overview
    ISO 80369-3:2016 Small-bore connectors for liquids and gases in healthcare applications — Part 3: Connectors for enteral applications
    BS EN 12342 : 1998 BREATHING TUBES INTENDED FOR USE WITH ANAESTHETIC APPARATUS AND VENTILATORS
    I.S. EN ISO 11608-1:2015 NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 1: NEEDLE-BASED INJECTION SYSTEMS (ISO 11608-1:2014)
    DIN EN 12342:1998-09 BREATHING TUBES INTENDED FOR USE WITH ANAESTHETIC APPARATUS AND VENTILATORS
    DIN EN 12342:2010-01 BREATHING TUBES INTENDED FOR USE WITH ANAESTHETIC APPARATUS AND VENTILATORS
    EN ISO 15002:2008 Flow-metering devices for connection to terminal units of medical gas pipeline systems (ISO 15002:2008)
    EN 60601-2-16:2015 Medical electrical equipment - Part 2-16: Particular requirements for the basic safety and essential performance of haemodialysis, haemodiafiltration and haemofiltration equipment
    EN ISO 9680:2014 Dentistry - Operating lights (ISO 9680:2014)
    EN 13544-1:2007+A1:2009 Respiratory therapy equipment - Part 1: Nebulizing systems and their components
    ONORM EN ISO 11608-5 : 2012 NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 5: AUTOMATED FUNCTIONS (ISO 11608-5:2012)
    BS EN ISO 15002:2008 Flow-metering devices for connection to terminal units of medical gas pipeline systems
    CAN/CSA-ISO 16571:16 SYSTEMS FOR EVACUATION OF PLUME GENERATED BY MEDICAL DEVICES
    UNE-EN ISO 80369-1:2011 Small bore connectors for liquids and gases in healthcare applications - Part 1: General requirements (ISO 80369-1:2010)
    09/30173644 DC : 0 BS EN ISO 80369-1 - SMALL BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 1: GENERAL REQUIREMENTS
    I.S. EN 285:2015 STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS
    BS EN ISO 5359 : 2014 ANAESTHETIC AND RESPIRATORY EQUIPMENT - LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES
    BS ISO/IEEE 11073-00103 : 2015 HEALTH INFORMATICS - PERSONAL HEALTH DEVICE COMMUNICATION - PART 00103: OVERVIEW
    UNE-EN ISO 11608-5:2013 Needle-based injection systems for medical use - Requirements and test methods - Part 5: Automated functions (ISO 11608-5:2012)
    15/30280196 DC : 0 BS ISO/IEC 25022 - SYSTEMS AND SOFTWARE ENGINEERING - SYSTEMS AND SOFTWARE QUALITY REQUIREMENTS AND EVALUATION (SQUARE) - MEASUREMENT OF QUALITY IN USE
    NF EN ISO 80369-1 : 2011 SMALL BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 1: GENERAL REQUIREMENTS
    08/30154605 DC : DRAFT APR 2008 BS ISO 15223-2 - MEDICAL DEVICES - SYMBOLS TO BE USED WITH MEDICAL DEVICE LABELS, LABELLING AND INFORMATION TO BE SUPPLIED - PART 2: SYMBOL DEVELOPMENT, SELECTION AND VALIDATION
    UNI EN ISO 5367 : 2015 ANAESTHETIC AND RESPIRATORY EQUIPMENT - BREATHING SETS AND CONNECTORS
    16/30216785 DC : 0 BS EN 62667 - MEDICAL ELECTRICAL EQUIPMENT - MEDICAL LIGHT ION BEAM EQUIPMENT - PERFORMANCE CHARACTERISTICS
    DIN EN ISO 11608-5:2013-01 Needle-based injection systems for medical use - Requirements and test methods - Part 5: Automated functions (ISO 11608-5:2012)
    I.S. EN 1865-3:2012 PATIENT HANDLING EQUIPMENT USED IN ROAD AMBULANCES - PART 3: HEAVY DUTY STRETCHER
    11/30206856 DC : 0 BS EN 60601-1-8:2007/A1 - MEDICAL ELECTRICAL EQUIPMENT - PART 1-8: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: GENERAL REQUIREMENTS, TESTS AND GUIDANCE FOR ALARM SYSTEMS IN MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS
    DIN EN ISO 80601-2-72:2016-04 Medical electrical equipment - Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients (ISO 80601-2-72:2015)
    AAMI IEC 80601-2-30 : 2009 MEDICAL ELECTRICAL EQUIPMENT - PART 2-30: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AUTOMATED NON-INVASIVE SPHYGMOMANOMETERS
    06/30146526 DC : 0 BS ISO 18113-5 - CLINICAL LABORATORY TESTING AND IN VITRO DIAGNOSTIC MEDICAL SYSTEMS - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 5: IN VITRO DIAGNOSTIC INSTRUMENTS FOR SELF-TESTING
    14/30315340 DC : 0 BS EN 60601-2-66 ED.2 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-66: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HEARING INSTRUMENTS AND HEARING INSTRUMENT SYSTEMS
    I.S. EN ISO 5840-3:2013 CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 3: HEART VALVE SUBSTITUTES IMPLANTED BY TRANSCATHETER TECHNIQUES (ISO 5840-3:2013)
    14/30290166 DC : 0 BS ISO 16142-1 - MEDICAL DEVICES - RECOGNIZED ESSENTIAL PRINCIPLES OF SAFETY AND PERFORMANCE OF MEDICAL DEVICES - PART 1: GENERAL ESSENTIAL PRINCIPLES AND ADDITIONAL SPECIFIC ESSENTIAL PRINCIPLES FOR ALL NON-IVD MEDICAL DEVICES AND GUIDANCE ON THE SELECTION OF STANDARDS
    BS EN ISO 80369-1:2010 Small bore connectors for liquids and gases in healthcare applications General requirements
    UNE-EN 60601-2-66:2016 Medical electrical equipment - Part 2-66: Particular requirements for the basic safety and essential performance of hearing instruments and hearing instrument systems
    14/30281560 DC : 0 BS EN ISO 5840-2 - CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 2: SURGICALLY IMPLANTED HEART VALVE SUBSTITUTES
    PD ISO/TS 19218-2:2012 Medical devices. Hierarchical coding structure for adverse events Evaluation codes
    DIN EN ISO 15002:2008-11 FLOW-METERING DEVICES FOR CONNECTION TO TERMINAL UNITS OF MEDICAL GAS PIPELINE SYSTEMS
    UNI EN ISO 80601-2-12 : 2011 MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS
    15/30280904 DC : 0 BS ISO 18190 - ANAESTHETIC AND RESPIRATORY EQUIPMENT - GENERAL REQUIREMENTS FOR AIRWAYS AND RELATED EQUIPMENT
    CAN/CSA-Z15002:12 (R2017) Flow-metering devices for connection to terminal units of medical gas pipeline systems (Adopted ISO 15002:2008, second edition, 2008-07-01, with Canadian deviations)
    BS EN 60601-2-66:2015 Medical electrical equipment Particular requirements for the basic safety and essential performance of hearing instruments and hearing instrument systems
    12/30271196 DC : 0 BS EN 60601-1-10:2007/A1 - MEDICAL ELECTRICAL EQUIPMENT - PART 1-10: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR THE DEVELOPMENT OF PHYSIOLOGIC CLOSED-LOOP CONTROLLERS
    14/30294895 DC : 0 BS EN ISO 8537 - STERILE SINGLE-USE SYRINGES, WITH OR WITHOUT NEEDLE, FOR INSULIN
    CSA Z1500:2012 FLOW-METERING DEVICES FOR CONNECTION TO TERMINAL UNITS OF MEDICAL GAS PIPELINE SYSTEMS
    CSA C22.2 No. 60601.1.8 : 2008 : R2014 MEDICAL ELECTRICAL EQUIPMENT - PART 1-8: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: GENERAL REQUIREMENTS, TESTS AND GUIDANCE FOR ALARM SYSTEMS IN MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS
    BS EN ISO 80369-3:2016 Small-bore connectors for liquids and gases in healthcare applications Connectors for enteral applications
    NF EN 60601-1-11 : 2015 MEDICAL ELECTRICAL EQUIPMENT - PART 1-11: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS USED IN THE HOME HEALTHCARE ENVIRONMENT
    PD IEC/TR 60601-4-3:2015 Medical electrical equipment Guidance and interpretation. Considerations of unaddressed safety aspects in the third edition of IEC 60601-1 and proposals for new requirements
    UNI EN ISO 5840-3 : 2013 CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 3: HEART VALVE SUBSTITUTES IMPLANTED BY TRANSCATHETER TECHNIQUES
    UNE-EN ISO 10079-1:2016 Medical suction equipment - Part 1: Electrically powered suction equipment (ISO 10079-1:2015)
    UNE-EN ISO 20072:2013 Aerosol drug delivery device design verification - Requirements and test methods (ISO 20072:2009)
    I.S. EN 60601-1-6:2010 MEDICAL ELECTRICAL EQUIPMENT - PART 1-6: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: USABILITY
    AAMI ISO 5367 : 2015 ANAESTHETIC AND RESPIRATORY EQUIPMENT - BREATHING SETS AND CONNECTORS
    BS EN 60601-1-8 : 2007 MEDICAL ELECTRICAL EQUIPMENT - PART 1-8: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: GENERAL REQUIREMENTS, TESTS AND GUIDANCE FOR ALARM SYSTEMS IN MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS (IEC 60601-1-8:2006)
    CSA ISO 10079-3:14 (R2019) Medical suction equipment - Part 3: Suction equipment powered from a vacuum or positive pressure gas source (Adopted ISO 10079-3:2014, third edition, 2014-05-01)
    UNE-EN ISO 7494-1:2012 Dentistry - Dental units - Part 1: General requirements and test methods (ISO 7494-1:2011)
    AAMI IEC 60601-2-16 : 2012 MEDICAL ELECTRICAL EQUIPMENT - PART 2-16: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HEMODIALYSIS, HEMODIAFILTRATION AND HEMOFILTRATION EQUIPMENT
    AAMI ISO TIR 17137 : 2014 CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - CARDIOVASCULAR ABSORBABLE IMPLANTS
    I.S. EN ISO 80369-3:2016 SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 3: CONNECTORS FOR ENTERAL APPLICATIONS (ISO/IEC/DIS 80369-3:2014)
    I.S. EN ISO 5840-1:2015 CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 1: GENERAL REQUIREMENTS (ISO 5840-1:2015)
    EN 60601-1-8:2007/A11:2017 MEDICAL ELECTRICAL EQUIPMENT - PART 1-8: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: GENERAL REQUIREMENTS, TESTS AND GUIDANCE FOR ALARM SYSTEMS IN MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS (IEC 60601-1-8:2006/A1:2012)
    CEI UNI EN ISO 80369-1 : 2011 SMALL BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 1: GENERAL REQUIREMENTS
    ISO 7494-1:2011 Dentistry Dental units Part 1: General requirements and test methods
    CSA C22.2 No. 60601.1.8 : 2008 MEDICAL ELECTRICAL EQUIPMENT - PART 1-8: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: GENERAL REQUIREMENTS, TESTS AND GUIDANCE FOR ALARM SYSTEMS IN MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS
    CAN/CSA-ISO 10079-1:16 Medical suction equipment - Part 1: Electrically powered suction equipment (Adopted ISO 10079-1:2015, third edition, 2015-11-01)
    CSA C22.2 No. 60601.2.49 : 2011 : R2016 MEDICAL ELECTRICAL EQUIPMENT - PART 2-49: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF MULTIFUNCTION PATIENT MONITORING EQUIPMENT
    CSA C22.2 No. 80601-2-69 : 2016 MEDICAL ELECTRICAL EQUIPMENT - PART 2-69: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF OXYGEN CONCENTRATOR EQUIPMENT
    CSA ISO 10079-2 : 2014 MEDICAL SUCTION EQUIPMENT - PART 2: MANUALLY POWERED SUCTION EQUIPMENT
    I.S. EN 60601-2-16:2015 MEDICAL ELECTRICAL EQUIPMENT - PART 2-16: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HAEMODIALYSIS, HAEMODIAFILTRATION AND HAEMOFILTRATION EQUIPMENT
    UNE-EN ISO 14457:2013 Dentistry - Handpieces and motors (ISO 14457:2012)
    BS EN ISO 5367:2014 Anaesthetic and respiratory equipment. Breathing sets and connectors
    UNE-EN ISO 5367:2015 Anaesthetic and respiratory equipment - Breathing sets and connectors (ISO 5367:2014)
    UNE-EN ISO 18113-1:2012 In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 1: Terms, definitions and general requirements (ISO 18113-1:2009)
    AAMI ISO 15223-2 : 2010 MEDICAL DEVICES - SYMBOLS TO BE USED WITH MEDICAL DEVICE LABELS, LABELING AND INFORMATION TO BE SUPPLIED - PART 2: SYMBOL DEVELOPMENT, SELECTION AND VALIDATION
    CSA C22.2 No. 80601-2-12 : 2012 MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS
    CSA C22.2 No. 60601-1-10 : 2009 : R2014 MEDICAL ELECTRICAL EQUIPMENT - PART 1-10: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR THE DEVELOPMENT OF PHYSIOLOGIC CLOSED-LOOP CONTROLLERS
    ISO 14971:2007 Medical devices Application of risk management to medical devices
    CEI UNI EN ISO 14971 : 2013 MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES
    IEC TR 61258:2008 Guidelines for the development and use of medical electrical equipment educational materials
    I.S. EN 62083:2009 MEDICAL ELECTRICAL EQUIPMENT - REQUIREMENTS FOR THE SAFETY OF RADIOTHERAPY TREATMENT PLANNING SYSTEMS
    ISO 5367:2014 Anaesthetic and respiratory equipment — Breathing sets and connectors
    I.S. EN ISO 14971:2012 MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES (ISO 14971:2007, CORRECTED VERSION 2007-10-01)
    DIN EN ISO 6875:2011-10 DENTISTRY - PATIENT CHAIR
    DIN EN 1782:2009-12 TRACHEAL TUBES AND CONNECTORS
    DIN EN ISO 7494-2:2015-08 Dentistry - Dental units - Part 2: Air, water, suction and wastewater systems (ISO 7494-2:2015)
    DIN EN ISO 14971:2013-04 MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES (ISO 14971:2007)
    DIN EN ISO 5840-2 E : 2016 CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 2: SURGICALLY IMPLANTED HEART VALVE SUBSTITUTES (ISO 5840-2:2015)
    BS EN ISO 7494-2:2015 Dentistry. Dental units Air, water, suction and wastewater systems
    BS EN 45502-1:2015 Implants for surgery. Active implantable medical devices General requirements for safety, marking and for information to be provided by the manufacturer
    BS EN ISO 10079-2:2014 Medical suction equipment Manually powered suction equipment
    14/30311240 DC : 0 BS EN 61010-1 ED 3 AMD 1 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
    DIN EN ISO 9680:2015-02 Dentistry - Operating lights (ISO 9680:2014)
    I.S. EN ISO 15197:2015 IN VITRO DIAGNOSTIC TEST SYSTEMS - REQUIREMENTS FOR BLOOD-GLUCOSE MONITORING SYSTEMS FOR SELF-TESTING IN MANAGING DIABETES MELLITUS (ISO 15197:2013)
    I.S. EN ISO 6875:2011 DENTISTRY - PATIENT CHAIR
    EN ISO 5840-2:2015 Cardiovascular implants - Cardiac valve prostheses - Part 2: Surgically implanted heart valve substitutes (ISO 5840-2:2015)
    I.S. EN ISO 10079-2:2014 MEDICAL SUCTION EQUIPMENT - PART 2: MANUALLY POWERED SUCTION EQUIPMENT (ISO 10079-2:2014)
    I.S. EN ISO 9680:2014 DENTISTRY - OPERATING LIGHTS (ISO 9680:2014)
    EN ISO 5840-1:2015 Cardiovascular implants - Cardiac valve prostheses - Part 1: General requirements (ISO 5840-1:2015)
    UNI EN 13718-1 : 2014 MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES
    I.S. EN ISO 7494-2:2015 DENTISTRY - DENTAL UNITS - PART 2: AIR, WATER, SUCTION AND WASTEWATER SYSTEMS (ISO 7494-2:2015)
    EN ISO 5840-3:2013 Cardiovascular implants - Cardiac valve prostheses - Part 3: Heart valve substitutes implanted by transcatheter techniques (ISO 5840-3:2013)
    I.S. EN 45502-1:2015 IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 1: GENERAL REQUIREMENTS FOR SAFETY, MARKING AND FOR INFORMATION TO BE PROVIDED BY THE MANUFACTURER
    I.S. EN ISO 10079-3:2014 MEDICAL SUCTION EQUIPMENT - PART 3: SUCTION EQUIPMENT POWERED FROM A VACUUM OR POSITIVE PRESSURE GAS SOURCE (ISO 10079-3:2014)
    VDI 5702 Blatt 1:2017-04 Medical device software - Medical SPICE Process assessment model
    UNE-EN ISO 5840-2:2016 Cardiovascular implants - Cardiac valve prostheses - Part 2: Surgically implanted heart valve substitutes (ISO 5840-2:2015)
    ISO 80601-2-61:2017 Medical electrical equipment Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment
    I.S. EN ISO 11073-00103:2017 HEALTH INFORMATICS - PERSONAL HEALTH DEVICE COMMUNICATION - PART 00103: OVERVIEW (ISO/IEEE 11073-00103:2015)
    11/30215841 DC : 0 BS EN ISO 14457 - DENTISTRY - HAND PIECES AND MOTORS
    14/30296572 DC : 0 BS EN 60601-1-11 - MEDICAL ELECTRICAL EQUIPMENT - PART 1-11: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS USED IN THE HOME HEALTHCARE ENVIRONMENT
    DIN EN 1865-2:2015-05 PATIENT HANDLING EQUIPMENT USED IN ROAD AMBULANCES - PART 2: POWER ASSISTED STRETCHER
    BS ISO 15223-2:2010 Medical devices. Symbols to be used with medical device labels, labelling, and information to be supplied Symbol development, selection and validation
    ANSI/AAMI/IEC TIR62348:2012 ASSESSMENT OF THE IMPACT OF THE MOST SIGNIFICANT CHANGES IN AMENDMENT 1 TO IEC 60601-1:2005 AND MAPPING OF THE CLAUSES OF IEC 60601-1:2005 TO THE PREVIOUS EDITION
    DIN EN ISO 80601-2-72 E : 2016 MEDICAL ELECTRICAL EQUIPMENT - PART 2-72: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HOME HEALTHCARE ENVIRONMENT VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS (ISO 80601-2-72:2015)
    ISO/TS 17518:2015 Medical laboratories — Reagents for staining biological material — Guidance for users
    UNI EN ISO 80601-2-69 : 2014 MEDICAL ELECTRICAL EQUIPMENT - PART 2-69: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF OXYGEN CONCENTRATOR EQUIPMENT
    13/30255929 DC : 0 BS EN ISO 7396-1 - MEDICAL GAS PIPELINE SYSTEMS - PART 1: PIPELINE SYSTEMS FOR COMPRESSED MEDICAL GASES AND VACUUM
    BS ISO 27427:2013 Anaesthetic and respiratory equipment. Nebulizing systems and components
    BS EN 60601-2-68:2015 Medical electrical equipment Particular requirements for the basic safety and essential performance of X-ray-based image-guided radiotherapy equipment for use with electron accelerators, light ion beam therapy equipment and radionuclide beam therapy equipment
    BS EN ISO 11608-5:2012 Needle-based injection systems for medical use. Requirements and test methods Automated functions
    I.S. EN ISO 18113-1:2011 IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 1: TERMS, DEFINITIONS AND GENERAL REQUIREMENTS (ISO 18113-1:2009)
    AAMI ISO TIR 19218-2 : 2012 MEDICAL DEVICES - HIERARCHICAL CODING STRUCTURE FOR ADVERSE EVENTS - PART 2: EVALUATION CODES
    14/30281833 DC : 0 BS EN ISO 17509 - DENTISTRY - TORQUE TRANSMITTER FOR HANDPIECES USED FOR IMPLANTATION
    12/30246621 DC : 0 BS EN 60601-2-68 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-68: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF X-RAY BASED IMAGE GUIDED RADIOTHERAPY EQUIPMENT FOR USE WITH ELECTRON ACCELERATORS, LIGHT ION BEAM THERAPY EQUIPMENT AND RADIONUCLIDE BEAM THERAPY EQUIPMENT
    10/30208977 DC : 0 BS EN ISO 11608-1 - NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 1: NEEDLE-BASED INJECTION SYSTEMS
    BS EN ISO 5840-1:2015 Cardiovascular implants. Cardiac valve prostheses General requirements
    UNI EN ISO 20072 : 2013 AEROSOL DRUG DELIVERY DEVICE DESIGN VERIFICATION - REQUIREMENTS AND TEST METHODS
    BS EN ISO 5840-3:2013 Cardiovascular implants. Cardiac valve prostheses Heart valve substitutes implanted by transcatheter techniques
    CSA Z10524-4 : 2012 PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 4: LOW-PRESSURE REGULATORS
    UNE-EN 60601-1-6:2010 Medical electrical equipment -- Part 1-6: General requirements for basic safety and essential performance - Collateral standard: Usability
    BS EN 60601-1-10 : 2008 MEDICAL ELECTRICAL EQUIPMENT - PART 1-10: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR THE DEVELOPMENT OF PHYSIOLOGIC CLOSED-LOOP CONTROLLERS
    UNE-EN ISO 5840-1:2016 Cardiovascular implants - Cardiac valve prostheses - Part 1: General requirements (ISO 5840-1:2015)
    CAN/CSA-C22.2 NO. 80601-2-67:17 Medical electrical equipment — Part 2-67: Particular requirements for basic safety and essential performance of oxygen conserving equipment (Adopted ISO 80601-2-67:2014, first edition, 2014-06-01, with Canadian deviations)
    DIN EN ISO 5840-2:2016-05 Cardiovascular implants - Cardiac valve prostheses - Part 2: Surgically implanted heart valve substitutes (ISO 5840-2:2015)
    UNI EN ISO 11608-5 : 2013 NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 5: AUTOMATED FUNCTIONS
    I.S. EN ISO 5361:2016 ANAESTHETIC AND RESPIRATORY EQUIPMENT - TRACHEAL TUBES AND CONNECTORS (ISO/DIS 5361:2014)
    IEC TR 80002-1:2009 Medical device software - Part 1: Guidance on the application of ISO 14971 to medical device software
    DIN EN ISO 5840-1:2015-12 Cardiovascular implants - Cardiac valve prostheses - Part 1: General requirements (ISO 5840-1:2015)
    BS EN 60601-2-49:2015 Medical electrical equipment Particular requirements for the basic safety and essential performance of multifunction patient monitoring equipment
    BS EN 1865-2 : 2010 PATIENT HANDLING EQUIPMENT USED IN ROAD AMBULANCES - PART 2: POWER ASSISTED STRETCHER
    PREN ISO 80369-1 : DRAFT 2009 SMALL BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 1: GENERAL REQUIREMENTS
    AAMI HE75 : 2009 HUMAN FACTORS ENGINEERING - DESIGN OF MEDICAL DEVICES
    I.S. EN ISO 5840-2:2015 CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 2: SURGICALLY IMPLANTED HEART VALVE SUBSTITUTES (ISO 5840-2:2015)
    I.S. EN 60601-1-8:2007 MEDICAL ELECTRICAL EQUIPMENT - PART 1-8: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: GENERAL REQUIREMENTS, TESTS AND GUIDANCE FOR ALARM SYSTEMS IN MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS
    ISO 10079-1:2015 Medical suction equipment Part 1: Electrically powered suction equipment
    I.S. EN 80601-2-30:2010 MEDICAL ELECTRICAL EQUIPMENT - PART 2-30: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AUTOMATED NON-INVASIVE SPHYGMOMANOMETERS
    AAMI ISO 5840-1 : 2016 CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 1: GENERAL REQUIREMENTS
    AAMI ISO 14708-5 : 2010 IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 5: CIRCULATORY SUPPORT DEVICES
    EN 60601-2-1:2015 Medical electrical equipment - Part 2-1: Particular requirements for the basic safety and essential performance of electron accelerators in the range 1 MeV to 50 MeV
    EN 60601-1-10:2008/A1:2015 MEDICAL ELECTRICAL EQUIPMENT - PART 1-10: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR THE DEVELOPMENT OF PHYSIOLOGIC CLOSED-LOOP CONTROLLERS (IEC 60601-1-10:2007)
    UNI EN ISO 5361 : 2013 ANAESTHETIC AND RESPIRATORY EQUIPMENT - TRACHEAL TUBES AND CONNECTORS
    ISO/IEC 25022:2016 Systems and software engineering Systems and software quality requirements and evaluation (SQuaRE) Measurement of quality in use
    ISO 11040-8:2016 Prefilled syringes — Part 8: Requirements and test methods for finished prefilled syringes
    CSA ISO 10079-3 : 2014 MEDICAL SUCTION EQUIPMENT - PART 3: SUCTION EQUIPMENT POWERED FROM A VACUUM OR POSITIVE PRESSURE GAS SOURCE
    ISO/TS 19218-2:2012 Medical devices Hierarchical coding structure for adverse events Part 2: Evaluation codes
    CSA C22.2 No. 60601-2-68 : 2015 MEDICAL ELECTRICAL EQUIPMENT - PART 2-68: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF X-RAY-BASED IMAGE-GUIDED RADIOTHERAPY EQUIPMENT FOR USE WITH ELECTRON ACCELERATORS, LIGHT ION BEAM THERAPY EQUIPMENT AND RADIONUCLIDE BEAM THERAPY EQUIPMENT
    CSA C22.2 No. 60601.2.1 : 2011 : INC : AMD 1 : 2015 : R2016 MEDICAL ELECTRICAL EQUIPMENT - PART 2-1: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF ELECTRON ACCELERATORS IN THE RANGE 1 MEV TO 50 MEV
    CSA C22.2 No. 60601-1-10:2009 MEDICAL ELECTRICAL EQUIPMENT - PART 1-10: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR THE DEVELOPMENT OF PHYSIOLOGIC CLOSED-LOOP CONTROLLERS
    EN ISO 80369-1:2010 Small bore connectors for liquids and gases in healthcare applications - Part 1: General requirements (ISO 80369-1:2010)
    BS EN ISO 14971:2012 Medical devices. Application of risk management to medical devices
    ISO 15002:2008 Flow-metering devices for connection to terminal units of medical gas pipeline systems
    IEC 60601-1-8:2006+AMD1:2012 CSV Medical electrical equipment - Part 1-8: General requirements forbasic safety and essential performance - Collateral Standard: General requirements, tests and guidance for alarm systems inmedical electrical equipment and medical electrical systems
    DIN EN 13544-1:2009-12 RESPIRATORY THERAPY EQUIPMENT - PART 1: NEBULIZING SYSTEMS AND THEIR COMPONENTS
    DIN EN 285:2016-05 Sterilization - Steam sterilizers - Large sterilizers
    DIN EN 13718-1:2014-12 MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES
    DIN EN ISO 10079-3:2014-09 Medical suction equipment - Part 3: Suction equipment powered from a vacuum or positive pressure gas source (ISO 10079-3:2014)
    DIN EN ISO 11608-1:2015-04 Needle-based injection systems for medical use - Requirements and test methods - Part 1: Needle-based injection systems (ISO 11608-1:2014)
    BS EN 60601-2-16:2015 Medical electrical equipment Particular requirements for the basic safety and essential performance of haemodialysis, haemodiafiltration and haemofiltration equipment
    ISO 15197:2013 In vitro diagnostic test systems — Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus
    IEC 60601-1-6:2010+AMD1:2013 CSV Medical electrical equipment - Part 1-6: General requirements for basic safety and essential performance - Collateral standard: Usability
    ISO 80601-2-69:2014 Medical electrical equipment Part 2-69: Particular requirements for basic safety and essential performance of oxygen concentrator equipment
    IEC 60601-2-66:2015 Medical electrical equipment - Part 2-66: Particular requirements for the basic safety and essential performance of hearing instruments and hearing instrument systems
    CSA Z8000 : 2011 : R2016 CANADIAN HEALTH CARE FACILITIES
    CSA Z8000 : 2011 CANADIAN HEALTH CARE FACILITIES
    CSA Z8000 : 2011 : INC : UPD 1 : 2013 CANADIAN HEALTH CARE FACILITIES
    EN ISO 80601-2-69:2014 Medical electrical equipment - Part 2-69: Particular requirements for basic safety and essential performance of oxygen concentrator equipment (ISO 80601-2-69:2014)
    I.S. EN 13544-1:2007 RESPIRATORY THERAPY EQUIPMENT - PART 1: NEBULIZING SYSTEMS AND THEIR COMPONENTS
    UNE-EN 1782:1998 TRACHEAL TUBES AND CONNECTORS.
    CSA C22.2 No. 80601-2-12 : 2012(R2017) MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS
    EN ISO 7494-2:2015 Dentistry - Dental units - Part 2: Air, water, suction and wastewater systems (ISO 7494-2:2015)
    EN 1782:1998+A1:2009 Tracheal tubes and connectors
    UNI EN ISO 6875 : 2011 DENTISTRY - PATIENT CHAIR
    EN 45502-1:2015 IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 1: GENERAL REQUIREMENTS FOR SAFETY, MARKING AND FOR INFORMATION TO BE PROVIDED BY THE MANUFACTURER
    UNI EN ISO 10079-3 : 2014 MEDICAL SUCTION EQUIPMENT - PART 3: SUCTION EQUIPMENT POWERED FROM A VACUUM OR POSITIVE PRESSURE GAS SOURCE
    ONORM EN ISO 10079-2 : 2014 MEDICAL SUCTION EQUIPMENT - PART 2: MANUALLY POWERED SUCTION EQUIPMENT (ISO 10079-2:2014)
    UNI EN ISO 10079-2 : 2014 MEDICAL SUCTION EQUIPMENT - PART 2: MANUALLY POWERED SUCTION EQUIPMENT
    UNI EN 13544-1 : 2009 RESPIRATORY THERAPY EQUIPMENT - PART 1: NEBULIZING SYSTEMS AND THEIR COMPONENTS
    UNI EN 12342 : 2009 BREATHING TUBES INTENDED FOR USE WITH ANAESTHETIC APPARATUS AND VENTILATORS
    ONORM EN ISO 10079-3 : 2014 MEDICAL SUCTION EQUIPMENT - PART 3: SUCTION EQUIPMENT POWERED FROM A VACUUM OR POSITIVE PRESSURE GAS SOURCE (ISO 10079-3:2014)
    UNI EN 1782 : 2009 TRACHEAL TUBES AND CONNECTORS
    UNE-EN ISO 5361:2017 Anaesthetic and respiratory equipment - Tracheal tubes and connectors (ISO 5361:2016)
    BS ISO 16571:2014 Systems for evacuation of plume generated by medical devices
    ANSI/AAMI HA60601-1-11:2015 MEDICAL ELECTRICAL EQUIPMENT - PART 1-11: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS USED IN THE HOME HEALTHCARE ENVIRONMENT
    CAN/CSA-C22.2 NO. 60601-1-8:08 (R2018) Medical electrical equipment - Part 1-8: General requirements for basic safety and essential performance - Collateral standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems (Adopted IEC 60601-1-8:2006, second edition, 2006-10) | Appareils électromédicaux - Partie 1-8: Exigences générales pour la sécurité de base et les performances essentielles - Norme collatérale: Exigences générales, essais et guide pour les systèmes d\'alarme des appareils et des systèmes électromédicaux (norme IEC 60601-1-8:2006 adoptée, deuxième édition, 2006-10)
    DIN EN ISO 20072:2013-10 AEROSOL DRUG DELIVERY DEVICE DESIGN VERIFICATION - REQUIREMENTS AND TEST METHODS (ISO 20072:2009)
    NF EN 1865-2 : 2011 + A1 2016 PATIENT HANDLING EQUIPMENT USED IN ROAD AMBULANCES - PART 2: POWER ASSISTED STRETCHERS
    14/30277509 DC : 0 BS ISO 18250-3 - CONNECTORS FOR RESERVOIR DELIVERY SYSTEMS - PART 2: ENTERNAL APPLICATIONS
    BS EN ISO 20072:2013 Aerosol drug delivery device design verification. Requirements and test methods
    EN ISO 5359:2014/A1:2017 ANAESTHETIC AND RESPIRATORY EQUIPMENT - LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES (ISO 5359:2014/AMD 1:2017)
    08/30192448 DC : DRAFT DEC 2008 BS ISO 14708-5 - IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 5: CIRCULATORY SUPPORT DEVICES
    BS EN ISO 80601-2-72:2015 Medical electrical equipment Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients
    AAMI/IEC TIR80002-1:2009 MEDICAL DEVICE SOFTWARE - PART 1: GUIDANCE ON THE APPLICATION OF ISO 14971 TO MEDICAL DEVICE SOFTWARE
    09/30186527 DC : 0 BS EN ISO 23908-1 - SHARPS INJURY PROTECTION - REQUIREMENTS AND TEST METHODS - PART 1: SHARPS PROTECTION FEATURES FOR SINGLE-USED HYPODERMIC NEEDLES, CATHETERS, INTRODUCERS FOR CATHETERS AND NEEDLES USED FOR BLOOD SAMPLING
    NF EN 60601-2-66 : 2016 MEDICAL ELECTRICAL EQUIPMENT - PART 2-66: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HEARING INSTRUMENTS AND HEARING INSTRUMENT SYSTEMS
    15/30304642 DC : 0 BS ISO 11040-8 - PREFILLED SYRINGES - PART 8: REQUIREMENTS AND TEST METHODS FOR FINISHED PRIFILLED SYRINGES
    13/30264413 DC : 0 BS EN ISO 80601-2-72 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-72: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HOME HEALTHCARE ENVIRONMENT VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS
    11/30208525 DC : 0 BS EN ISO 15197 - IN VITRO DIAGNOSTIC TEST SYSTEMS - REQUIREMENTS FOR BLOOD-GLUCOSE MONITORING SYSTEMS FOR SELF-TESTING IN MANAGING DIABETES MELLITUS
    14/30281859 DC : 0 BS ISO 5361 - ANAESTHETIC AND RESPIRATORY EQUIPMENT - TRACHEAL TUBES AND CONNECTORS
    09/30176675 DC : 0 BS EN ISO 15223-1 - MEDICAL DEVICES - SYMBOLS TO BE USED WITH MEDICAL DEVICE LABELS, LABELLING AND INFORMATION TO BE SUPPLIED - PART 1: GENERAL REQUIREMENTS
    BS EN ISO 80601-2-69:2014 Medical electrical equipment Particular requirements for basic safety and essential performance of oxygen concentrator equipment
    IEC 60601-2-68:2014 Medical electrical equipment - Part 2-68: Particular requirements for the basic safety and essential performance of X-ray-based image-guided radiotherapy equipment for use with electron accelerators, light ion beam therapy equipment and radionuclide beam therapy equipment
    13/30233325 DC : 0 BS EN 45502-1 - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 1: GENERAL REQUIREMENTS FOR SAFETY, MARKING AND INFORMATION TO BE PROVIDED BY THE MANUFACTURER
    CAN/CSA-C22.2 NO. 80601-2-70:17 Medical electrical equipment — Part 2-70: Particular requirements for basic safety and essential performance of sleep apnoea breathing therapy equipment (Adopted ISO 80601-2-70:2015, first edition, 2015-01 , with Canadian deviations)
    BS ISO 27500 : 2016 THE HUMAN-CENTRED ORGANIZATION - RATIONALE AND GENERAL PRINCIPLES
    11/30219211 DC : 0 BS EN ISO 5840-3 - CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 3: HEART VALVE SUBSTITUTES IMPLANTED BY MINIMALLY INVASIVE TECHNIQUES
    BS EN ISO 5361:2016 Anaesthetic and respiratory equipment. Tracheal tubes and connectors
    UNE-EN ISO 80369-3:2017 Small-bore connectors for liquids and gases in healthcare applications - Part 3: Connectors for enteral applications (ISO 80369-3:2016)
    09/30189968 DC : DRAFT JAN 2009 BS EN 13544-1 AMD1 - RESPIRATORY THERAPY EQUIPMENT - PART 1: NEBULIZING SYSTEMS AND THEIR COMPONENTS
    BS EN ISO 11073-00103:2017 Health informatics. Personal health device communication Overview
    BS EN ISO 18113-5:2011 In vitro diagnostic medical Devices. Information supplied by the manufacturer (labelling) In vitro diagnostic instruments for self-testing
    12/30244415 DC : DRAFT APR 2012 BS ISO 27427 - ANAESTHETIC AND RESPIRATORY EQUIPMENT - NEBULIZING SYSTEMS AND COMPONENTS
    06/30146511 DC : 0 BS ISO 18113-1 - CLINICAL LABORATORY TESTING AND IN VITRO DIAGNOSTIC MEDICAL SYSTEMS - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 1: TERMS, DEFINITIONS AND GENERAL REQUIREMENTS
    DIN EN 1865-3:2015-05 PATIENT HANDLING EQUIPMENT USED IN ROAD AMBULANCES - PART 3: HEAVY DUTY STRETCHER
    CEI EN 62083 : 2011 MEDICAL ELECTRICAL EQUIPMENT - REQUIREMENTS FOR THE SAFETY OF RADIOTHERAPY TREATMENT PLANNING SYSTEMS
    PD IEC/TR 80002-1:2009 Medical device software Guidance on the application of ISO 14971 to medical device software
    UNI CEI EN ISO 14971 : 2012 MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES
    10/30208681 DC : DRAFT SEP 2010 BS ISO/IEC GUIDE 63 - GUIDE TO THE DEVELOPMENT AND INCLUSION OF SAFETY ASPECTS IN INTERNATIONAL STANDARDS FOR MEDICAL DEVICES
    NF EN ISO 80601-2-12 : 2011 MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS
    CSA C22.2 No. 60601.2.49:2011 MEDICAL ELECTRICAL EQUIPMENT - PART 2-49: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF MULTIFUNCTION PATIENT MONITORING EQUIPMENT
    CSA ISO 27427 : 2014 ANAESTHETIC AND RESPIRATORY EQUIPMENT - NEBULIZING SYSTEMS AND COMPONENTS
    BS ISO/IEC 25022:2016 Systems and software engineering. Systems and software quality requirements and evaluation (SQuaRE). Measurement of quality in use
    I.S. EN ISO 11608-5:2012 NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 5: AUTOMATED FUNCTIONS (ISO 11608-5:2012)
    AAMI ISO 14971 : 2007 : R2010 MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES
    CSA C22.2 No. 60601.2.16 : 2014(R2019) MEDICAL ELECTRICAL EQUIPMENT - PART 2-16: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HAEMODIALYSIS, HAEMODIAFILTRATION AND HAEMOFILTRATION EQUIPMENT
    I.S. EN ISO 7494-1:2011 DENTISTRY - DENTAL UNITS - PART 1: GENERAL REQUIREMENTS AND TEST METHODS
    CEI EN 60601-2-16 : 2016 MEDICAL ELECTRICAL EQUIPMENT - PART 2-16: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HAEMODIALYSIS, HAEMODIAFILTRATION AND HAEMOFILTRATION EQUIPMENT
    I.S. EN 60601-2-49:2015 MEDICAL ELECTRICAL EQUIPMENT - PART 2-49: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF MULTIFUNCTION PATIENT MONITORING EQUIPMENT
    EN 60601-1-6:2010/A1:2015 MEDICAL ELECTRICAL EQUIPMENT - PART 1-6: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: USABILITY (IEC 60601-1-6:2010/A1:2013)
    EN 60601-2-68:2015 Medical electrical equipment - Part 2-68: Particular requirements for the basic safety and essential performance of X-ray-based image-guided radiotherapy equipment for use with electron accelerators, light ion beam therapy equipment and radionuclide beam therapy equipment
    ANSI/AAMI/ISO 14708-1:2014 IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 1: GENERAL REQUIREMENTS FOR SAFETY, MARKING AND FOR INFORMATION TO BE PROVIDED BY THE MANUFACTURER
    I.S. EN ISO 15002:2008 FLOW-METERING DEVICES FOR CONNECTION TO TERMINAL UNITS OF MEDICAL GAS PIPELINE SYSTEMS
    I.S. EN ISO 80601-2-72:2015 MEDICAL ELECTRICAL EQUIPMENT - PART 2-72: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HOME HEALTHCARE ENVIRONMENT VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS (ISO 80601-2-72:2015)
    ISO 5359:2014 Anaesthetic and respiratory equipment Low-pressure hose assemblies for use with medical gases
    ISO 14708-5:2010 Implants for surgery Active implantable medical devices Part 5: Circulatory support devices
    I.S. EN 60601-2-68:2015 MEDICAL ELECTRICAL EQUIPMENT - PART 2-68: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF X-RAY-BASED IMAGE-GUIDED RADIOTHERAPY EQUIPMENT FOR USE WITH ELECTRON ACCELERATORS, LIGHT ION BEAM THERAPY EQUIPMENT AND RADIONUCLIDE BEAM THERAPY EQUIPMENT
    ISO 80369-1:2010 Small-bore connectors for liquids and gases in healthcare applications Part 1: General requirements
    UNE-EN ISO 23908:2013 Sharps injury protection - Requirements and test methods - Sharps protection features for single-use hypodermic needles, introducers for catheters and needles used for blood sampling (ISO 23908:2011)
    DIN EN ISO 5367:2015-02 Anaesthetic and respiratory equipment - Breathing sets and connectors (ISO 5367:2014)
    I.S. EN 60601-1-11:2015 MEDICAL ELECTRICAL EQUIPMENT - PART 1-11: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS USED IN THE HOME HEALTHCARE ENVIRONMENT
    PREN ISO 7494-2 : DRAFT 2013 DENTISTRY - DENTAL UNITS - PART 2: MEDIA CHANNELS AND CONNECTIONS (ISO/DIS 7494-2:2013)
    DIN EN ISO 5359:2015-02 ANAESTHETIC AND RESPIRATORY EQUIPMENT - LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES (ISO 5359:2014)
    BS EN ISO 7494-1:2011 Dentistry. Dental units General requirements and test methods
    EN ISO 14971:2012 Medical devices - Application of risk management to medical devices (ISO 14971:2007, Corrected version 2007-10-01)
    ISO 80601-2-70:2015 Medical electrical equipment Part 2-70: Particular requirements for basic safety and essential performance of sleep apnoea breathing therapy equipment
    ISO 15223-2:2010 Medical devices — Symbols to be used with medical device labels, labelling, and information to be supplied — Part 2: Symbol development, selection and validation
    DIN EN ISO 80369-1:2015-09 (Draft) SMALL BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 1: GENERAL REQUIREMENTS
    I.S. EN ISO 80601-2-12:2011 MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS (ISO 80601-2-12:2011/COR 1:2011)
    I.S. EN 60601-2-1:2015 MEDICAL ELECTRICAL EQUIPMENT - PART 2-1: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF ELECTRON ACCELERATORS IN THE RANGE 1 MEV TO 50 MEV
    EN ISO 80601-2-12:2011/AC:2011 MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS (ISO 80601-2-12:2011/COR 1:2011)
    ISO 80601-2-12:2011 Medical electrical equipment Part 2-12: Particular requirements for basic safety and essential performance of critical care ventilators
    DIN EN ISO 15197:2015-12 IN VITRO DIAGNOSTIC TEST SYSTEMS - REQUIREMENTS FOR BLOOD-GLUCOSE MONITORING SYSTEMS FOR SELF-TESTING IN MANAGING DIABETES MELLITUS (ISO 15197:2013)
    UNE-EN ISO 6875:2012 Dentistry - Patient chair (ISO 6875:2011)
    DIN EN ISO 11608-1 E : 2015 NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 1: NEEDLE-BASED INJECTION SYSTEMS (ISO 11608-1:2014)
    DIN EN ISO 10079-1:2016-05 MEDICAL SUCTION EQUIPMENT - PART 1: ELECTRICALLY POWERED SUCTION EQUIPMENT (ISO 10079-1:2015)
    DIN EN ISO 10079-2:2014-09 Medical suction equipment - Part 2: Manually powered suction equipment (ISO 10079-2:2014); German version EN ISO 10079-2:2014
    UNE-EN ISO 10079-3:2014 Medical suction equipment - Part 3: Suction equipment powered from a vacuum or positive pressure gas source (ISO 10079-3:2014)
    BS EN 13544-1 : 2007 RESPIRATORY THERAPY EQUIPMENT - PART 1: NEBULIZING SYSTEMS AND THEIR COMPONENTS
    BS EN ISO 10079-3:2014 Medical suction equipment Suction equipment powered from a vacuum or positive pressure gas source
    ISO 80601-2-72:2015 Medical electrical equipment — Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients
    BS EN ISO 9680:2014 Dentistry. Operating lights
    ISO 20072:2009 Aerosol drug delivery device design verification Requirements and test methods
    EN 13718-1:2014 Medical vehicles and their equipment - Air ambulances - Part 1: Requirements for medical devices used in air ambulances
    UNE-EN 60601-2-49:2016 Medical electrical equipment - Part 2-49: Particular requirements for the basic safety and essential performance of multifunction patient monitoring equipment
    ISO 5840-3:2013 Cardiovascular implants Cardiac valve prostheses Part 3: Heart valve substitutes implanted by transcatheter techniques
    I.S. EN 13718-1:2014 MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES
    ISO 6875:2011 Dentistry Patient chair
    BS EN 285:2015 Sterilization. Steam sterilizers. Large sterilizers
    ISO 5361:2016 Anaesthetic and respiratory equipment — Tracheal tubes and connectors
    IEC 60601-2-1:2009+AMD1:2014 CSV Medical electrical equipment - Part 2-1: Particular requirements for the basic safety and essential performance of electron accelerators in the range 1 MeV to 50 MeV
    ISO 18113-1:2009 In vitro diagnostic medical devices — Information supplied by the manufacturer (labelling) — Part 1: Terms, definitions and general requirements
    BS EN ISO 6875:2011 Dentistry. Patient chair
    IEC 60601-1-10:2007+AMD1:2013 CSV Medical electrical equipment - Part 1-10: General requirements forbasic safety and essential performance - Collateral Standard: Requirements for the development of physiologic closed-loopcontrollers
    ISO 5840-2:2015 Cardiovascular implants Cardiac valve prostheses Part 2: Surgically implanted heart valve substitutes
    ISO 11608-1:2014 Needle-based injection systems for medical use Requirements and test methods Part 1: Needle-based injection systems
    UNE-EN ISO 10079-2:2014 Medical suction equipment - Part 2: Manually powered suction equipment (ISO 10079-2:2014)
    ISO 18113-3:2009 In vitro diagnostic medical devices — Information supplied by the manufacturer (labelling) — Part 3: In vitro diagnostic instruments for professional use
    UNE-EN 62083:2010 Medical electrical equipment - Requirements for the safety of radiotherapy treatment planning systems
    ISO 10079-3:2014 Medical suction equipment Part 3: Suction equipment powered from a vacuum or positive pressure gas source
    ISO 23908:2011 Sharps injury protection Requirements and test methods Sharps protection features for single-use hypodermic needles, introducers for catheters and needles used for blood sampling
    ISO 9680:2014 Dentistry Operating lights
    IEC 62083:2009 Medical electrical equipment - Requirements for the safety of radiotherapy treatment planning systems
    ISO 27500:2016 The human-centred organization Rationale and general principles
    BS EN ISO 15197:2015 In vitro diagnostic test systems. Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus
    EN ISO 11073-00103:2017 Health informatics - Personal health device communication - Part 00103: Overview (ISO/IEEE 11073-00103:2015)
    EN 1865-2:2010+A1:2015 (edition 2) Patient handling equipment used in road ambulances - Part 2: Power assisted stretcher
    EN ISO 80601-2-72:2015 Medical electrical equipment - Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients (ISO 80601-2-72:2015)
    EN ISO 18113-5:2011 In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 5: In vitro diagnostic instruments for self-testing (ISO 18113-5:2009)
    EN ISO 5361:2016 Anaesthetic and respiratory equipment - Tracheal tubes and connectors (ISO 5361:2016)
    UNI EN ISO 9680 : 2015 DENTISTRY - OPERATING LIGHTS
    EN ISO 15197:2015 In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus (ISO 15197:2013)
    EN 12342:1998+A1:2009 Breathing tubes intended for use with anaesthetic apparatus and ventilators
    EN ISO 10079-2:2014 Medical suction equipment - Part 2: Manually powered suction equipment (ISO 10079-2:2014)
    EN ISO 11608-5:2012 Needle-based injection systems for medical use - Requirements and test methods - Part 5: Automated functions (ISO 11608-5:2012)
    EN ISO 10079-3:2014 Medical suction equipment - Part 3: Suction equipment powered from a vacuum or positive pressure gas source (ISO 10079-3:2014)
    EN ISO 23908:2013 Sharps injury protection - Requirements and test methods - Sharps protection features for single-use hypodermic needles, introducers for catheters and needles used for blood sampling (ISO 23908:2011)
    EN 1865-3:2012+A1:2015 (edition 2) Patient handling equipment used in road ambulances - Part 3: Heavy duty stretcher
    EN ISO 80369-3:2016 Small-bore connectors for liquids and gases in healthcare applications - Part 3: Connectors for enteral applications (ISO 80369-3:2016)
    EN ISO 20072:2013 Aerosol drug delivery device design verification - Requirements and test methods (ISO 20072:2009)
    EN ISO 10524-4:2008 Pressure regulators for use with medical gases - Part 4: Low-pressure regulators (ISO 10524-4:2008)
    EN ISO 11608-1:2015 Needle-based injection systems for medical use - Requirements and test methods - Part 1: Needle-based injection systems (ISO 11608-1:2014)
    EN ISO 18113-1:2011 In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 1: Terms, definitions and general requirements (ISO 18113-1:2009)
    EN ISO 5367:2014 Anaesthetic and respiratory equipment - Breathing sets and connectors (ISO 5367:2014)
    EN ISO 6875:2011 Dentistry - Patient chair (ISO 6875:2011)
    BS EN 1865-3 : 2012 PATIENT HANDLING EQUIPMENT USED IN ROAD AMBULANCES - PART 3: HEAVY DUTY STRETCHER
    12/30210881 DC : DRAFT APR 2012 BS EN ISO 5367 - ANAESTHETIC AND RESPIRATORY EQUIPMENT - BREATHING SETS AND CONNECTORS
    BS EN 60601-1-11:2015 Medical electrical equipment General requirements for basic safety and essential performance. Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment
    DIN EN ISO 5840-1 E : 2015 CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 1: GENERAL REQUIREMENTS (ISO 58401:2015)
    PREN 45502-1 : DRAFT 2013 ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 1: GENERAL REQUIREMENTS FOR SAFETY, MARKING AND INFORMATION TO BE PROVIDED BY THE MANUFACTURER
    UNE-EN 60601-2-1:2017 Medical electrical equipment - Part 2-1: Particular requirements for the basic safety and essential performance of electron accelerators in the range 1 MeV to 50 MeV
    13/30263413 DC : 0 BS EN ISO 7494-2 - DENTISTRY - DENTAL UNITS - PART 2: MEDIA CHANNELS AND CONNECTIONS
    UNI EN ISO 10524-4 : 2008 PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 4: LOW-PRESSURE REGULATORS
    DIN EN ISO 18113-5:2013-01 IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 5: IN VITRO DIAGNOSTIC INSTRUMENTS FOR SELF-TESTING (ISO 18113-5:2009)
    UNE-EN ISO 5840-3:2013 Cardiovascular implants - Cardiac valve prostheses - Part 3: Heart valve substitutes implanted by transcatheter techniques (ISO 5840-3:2013)
    14/30273278 DC : 0 BS EN ISO 18397 - DENTISTRY - POWERED SCALER
    BS EN ISO 10524-4:2008 Pressure regulators for use with medical gases Low-pressure regulators
    DIN EN ISO 18113-1:2013-01 IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 1: TERMS, DEFINITIONS AND GENERAL REQUIREMENTS (ISO 18113-1:2009)
    BS EN ISO 18113-1:2011 In vitro diagnostic medical devices. Information supplied by the manufacturer (labelling) Terms, definitions and general requirements
    IEC TR 62348:2012 Assessment of the impact of the most significant changes in Amendment 1 to IEC 60601-1:2005 and mapping of the clauses of IEC 60601-1:2005 to the previous edition
    10/30213842 DC : 0 BS EN ISO 11608-5 - NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 5: AUTOMATED FUNCTIONS
    CSA C22.2 No. 60601-1-11 : 2015 MEDICAL ELECTRICAL EQUIPMENT - PART 1-11: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS USED IN THE HOME HEALTHCARE ENVIRONMENT
    16/30310949 DC : 0 BS ISO 5910 - CARDIOVASCULAR IMPLANTS AND EXTRACOPOREAL SYSTEMS - CARDIAC VALVE REPAIR DEVICES
    06/30146518 DC : 0 BS ISO 18113-3 - CLINICAL LABORATORY TESTING AND IN VITRO DIAGNOSTIC MEDICAL SYSTEMS - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 3: IN VITRO DIAGNOSTIC INSTRUMENTS FOR PROFESSIONAL USE
    BS EN 80601-2-30 : 2010 MEDICAL ELECTRICAL EQUIPMENT - PART 2-30: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AUTOMATED NON-INVASIVE SPHYGMOMANOMETERS
    16/30316718 DC : 0 BS EN ISO 80601-2-61 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-61: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT
    I.S. EN ISO 5367:2014 ANAESTHETIC AND RESPIRATORY EQUIPMENT - BREATHING SETS AND CONNECTORS (ISO 5367:2014)
    CAN/CSA-Z10524-4:12 (R2017) Pressure regulators for use with medical gases - Part 4: Low-pressure regulators (Adopted ISO 10524-4:2008, first edition, 2008-06-01, with Canadian deviations)
    UNI EN ISO 18113-3 : 2012 IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 3: IN VITRO DIAGNOSTIC INSTRUMENTS FOR PROFESSIONAL USE
    CSA ISO 14971 : 2007 : R2017 MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES
    CSA ISO 14971 : 2007 : R2012 MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES
    DIN EN ISO 80601-2-69:2014-12 Medical electrical equipment - Part 2-69: Particular requirements for basic safety and essential performance of oxygen concentrator equipment (ISO 80601-2-69:2014)
    DIN EN ISO 5367 E : 2015 ANAESTHETIC AND RESPIRATORY EQUIPMENT - BREATHING SETS AND CONNECTORS (ISO 5367:2014)
    PREN ISO 11608-1 : DRAFT 2010 NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 1: NEEDLE-BASED INJECTION SYSTEMS
    CSA C22.2 No. 60601-1-10 : 2009 : INC : AMD 1 : 2014 : R201400 MEDICAL ELECTRICAL EQUIPMENT - PART 1-10: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR THE DEVELOPMENT OF PHYSIOLOGIC CLOSED-LOOP CONTROLLERS
    EN 60601-1-11:2015 Medical electrical equipment - Part 1-11: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment
    IEEE 11073-00103-2012 Health informatics - Personal health device communication Part 00103: Overview
    I.S. EN ISO 18113-5:2011 IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 5: IN VITRO DIAGNOSTIC INSTRUMENTS FOR SELF-TESTING (ISO 18113-5:2009)
    ISO 80601-2-67:2014 Medical electrical equipment Part 2-67: Particular requirements for basic safety and essential performance of oxygen-conserving equipment
    I.S. EN ISO 18113-3:2011 IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 3: IN VITRO DIAGNOSTIC INSTRUMENTS FOR PROFESSIONAL USE (ISO 18113-3:2009)
    CSA Z5359 : 2016 ANAESTHETIC AND RESPIRATORY EQUIPMENT - LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES, MEDICAL VACUUM, MEDICAL SUPPORT GASES, AND ANAESTHETIC GAS SCAVENGING SYSTEMS
    BS EN ISO 10079-1:2015 Medical suction equipment Electrically powered suction equipment
    I.S. EN ISO 80601-2-69:2014 MEDICAL ELECTRICAL EQUIPMENT - PART 2-69: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF OXYGEN CONCENTRATOR EQUIPMENT (ISO 80601-2-69:2014)
    UNI EN ISO 7494-1 : 2011 DENTISTRY - DENTAL UNITS - PART 1: GENERAL REQUIREMENTS AND TEST METHODS
    BS EN ISO 23908:2013 Sharps injury protection. Requirements and test methods. Sharps protection features for single-use hypodermic needles, introducers for catheters and needles used for blood sampling
    ANSI/AAMI/IEC 60601-1-8:2006/A2:2021 MEDICAL ELECTRICAL EQUIPMENT - PART 1-8: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: GENERAL REQUIREMENTS, TESTS AND GUIDANCE FOR ALARM SYSTEMS IN MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS
    DIN EN ISO 23908:2013-10 SHARPS INJURY PROTECTION - REQUIREMENTS AND TEST METHODS - SHARPS PROTECTION FEATURES FOR SINGLE-USE HYPODERMIC NEEDLES, INTRODUCERS FOR CATHETERS AND NEEDLES USED FOR BLOOD SAMPLING (ISO 23908:2011)
    I.S. EN ISO 10079-1:2015 MEDICAL SUCTION EQUIPMENT - PART 1: ELECTRICALLY POWERED SUCTION EQUIPMENT (ISO 10079-1:2015)
    EN ISO 7494-1:2011 Dentistry - Dental units - Part 1: General requirements and test methods (ISO 7494-1:2011)
    NF EN 60601-2-68 : 2015 MEDICAL ELECTRICAL EQUIPMENT - PART 2-68: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF X-RAY-BASED IMAGE-GUIDED RADIOTHERAPY EQUIPMENT FOR USE WITH ELECTRON ACCELERATORS, LIGHT ION BEAM THERAPY EQUIPMENT AND RADIONUCLIDE BEAM THERAPY EQUIPMENT
    ONORM EN ISO 7494-1 : 2011 DENTISTRY - DENTAL UNITS - PART 1: GENERAL REQUIREMENTS AND TEST METHODS (ISO 7494-1:2011)
    UNI EN ISO 18113-1 : 2012 IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 1: TERMS, DEFINITIONS AND GENERAL REQUIREMENTS
    13/30254355 DC : 0 BS ISO 80601-2-70 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-70: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF SLEEP APNEOA BREATHING THERAPY EQUIPMENT
    UNE-EN 1865-2:2011 Patient handling equipment used in road ambulances - Part 2: Power assisted stretcher
    DIN EN ISO 7494-1:2011-11 DENTISTRY - DENTAL UNITS - PART 1: GENERAL REQUIREMENTS AND TEST METHODS (ISO 7494-1:2011)
    PREN ISO 15197 : DRAFT 2011 IN VITRO DIAGNOSTIC TEST SYSTEMS - REQUIREMENTS FOR BLOOD-GLUCOSE MONITORING SYSTEMS FOR SELF-TESTING IN MANAGING DIABETES MELLITUS
    UNI EN ISO 15002 : 2008 FLOW-METERING DEVICES FOR CONNECTION TO TERMINAL UNITS OF MEDICAL GAS PIPELINE SYSTEMS
    I.S. EN ISO 5359:2014 ANAESTHETIC AND RESPIRATORY EQUIPMENT - LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES (ISO 5359:2014)
    ISO/IEC Guide 63:2012 Guide to the development and inclusion of safety aspects in International Standards for medical devices
    I.S. EN ISO 20072:2013 AEROSOL DRUG DELIVERY DEVICE DESIGN VERIFICATION - REQUIREMENTS AND TEST METHODS (ISO 20072:2009)
    ISO 27427:2013 Anaesthetic and respiratory equipment — Nebulizing systems and components
    UNE-EN 285:2016 Sterilization - Steam sterilizers - Large sterilizers
    UNE-EN ISO 15197:2015 In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus (ISO 15197:2013)
    ISO 18113-5:2009 In vitro diagnostic medical devices — Information supplied by the manufacturer (labelling) — Part 5: In vitro diagnostic instruments for self-testing
    IEC 60601-2-49:2011 Medical electrical equipment - Part 2-49: Particular requirements for the basic safety and essential performance of multifunction patient monitoring equipment
    EN 60601-2-66:2015 Medical electrical equipment - Part 2-66: Particular requirements for the basic safety and essential performance of hearing instruments and hearing instrument systems
    ISO 11608-5:2012 Needle-based injection systems for medical use Requirements and test methods Part 5: Automated functions
    BS EN ISO 11608-1:2015 Needle-based injection systems for medical use. Requirements and test methods Needle-based injection systems
    IEC 61010-1:2010+AMD1:2016 CSV Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
    ISO 5840-1:2015 Cardiovascular implants Cardiac valve prostheses Part 1: General requirements
    ISO 10079-2:2014 Medical suction equipment Part 2: Manually powered suction equipment
    EN 45502-1 : 2015 IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 1: GENERAL REQUIREMENTS FOR SAFETY, MARKING AND FOR INFORMATION TO BE PROVIDED BY THE MANUFACTURER
    DIN EN ISO 10079-2:2000-03 MEDICAL SUCTION EQUIPMENT - PART 2: MANUALLY POWERED SUCTION EQUIPMENT (ISO 10079-2:2014)
    EN 62083:2009 MEDICAL ELECTRICAL EQUIPMENT - REQUIREMENTS FOR THE SAFETY OF RADIOTHERAPY TREATMENT PLANNING SYSTEMS
    EN 80601-2-30:2010/A1:2015 MEDICAL ELECTRICAL EQUIPMENT - PART 2-30: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AUTOMATED NON-INVASIVE SPHYGMOMANOMETERS (IEC 80601-2-30:2009/A1:2013)
    DIN EN ISO 10079-3:2000-03 MEDICAL SUCTION EQUIPMENT - PART 3: SUCTION EQUIPMENT POWERED FROM A VACUUM OR POSITIVE PRESSURE GAS SOURCE (ISO 10079-3:2014)
    EN 60601-2-49:2015 Medical electrical equipment - Part 2-49: Particular requirements for the basic safety and essential performance of multifunction patient monitoring equipment
    UNE-EN 1865-3:2012 Patient handling equipment used in road ambulances - Part 3: Heavy duty stretcher
    UNE-EN 13544-1:2007 Respiratory therapy equipment - Part 1: Nebulizing systems and their components
    ONORM EN ISO 5367 : 2015 ANAESTHETIC AND RESPIRATORY EQUIPMENT - BREATHING SETS AND CONNECTORS (ISO 5367:2014)

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 9241-11:1998 Ergonomic requirements for office work with visual display terminals (VDTs) Part 11: Guidance on usability
    AAMI HE48 : 1993 HUMAN FACTORS ENGINEERING GUIDELINES AND PREFERRED PRACTICES FOR THE DESIGN OF MEDICAL DEVICES
    IEC 60601-1:2005+AMD1:2012 CSV Medical electrical equipment - Part 1: General requirements for basic safety and essential performance
    ISO 13485:2016 Medical devices Quality management systems Requirements for regulatory purposes
    IEC 60601-1-8:2006+AMD1:2012 CSV Medical electrical equipment - Part 1-8: General requirements forbasic safety and essential performance - Collateral Standard: General requirements, tests and guidance for alarm systems inmedical electrical equipment and medical electrical systems
    EN 1041:2008+A1:2013 Information supplied by the manufacturer of medical devices
    ISO/IEC Guide 51:2014 Safety aspects Guidelines for their inclusion in standards
    ISO/TR 16142:2006 Medical devices Guidance on the selection of standards in support of recognized essential principles of safety and performance of medical devices
    ISO 9001:2015 Quality management systems — Requirements
    ISO 9000:2015 Quality management systems — Fundamentals and vocabulary
    ISO 14971:2007 Medical devices Application of risk management to medical devices
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective