• IEC 62471:2006

    Current The latest, up-to-date edition.

    Photobiological safety of lamps and lamp systems

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s):  English - French, Spanish, Castilian

    Published date:  26-07-2006

    Publisher:  International Electrotechnical Committee

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    FOREWORD
    INTRODUCTION
    1. SCOPE
    2. NORMATIVE REFERENCES
    3. DEFINITIONS, SYMBOLS AND ABBREVIATIONS
    4. EXPOSURE LIMITS (EL'S)
       4.1 General
       4.2 Specific factors involved in the determination
           and application of retinal exposure limits
           4.2.1 Pupil diameter
           4.2.2 Angular subtense of source and measurement
                 field-of-view
       4.3 Hazard exposure limits
           4.3.1 Actinic UV hazard exposure limit for the skin
                 and eye
           4.3.2 Near-UV hazard exposure limit for the eye
           4.3.3 Retinal blue light hazard exposure limit
           4.3.4 Retinal blue light hazard exposure limit - small
                 source
           4.3.5 Retinal thermal hazard exposure limit
           4.3.6 Retinal thermal hazard exposure limit - weak
                 visual stimulus
           4.3.7 Infrared radiation hazard exposure limits for
                 the eye
           4.3.8 Thermal hazard exposure limit for the skin
    5. MEASUREMENT OF LAMPS AND LAMP SYSTEMS
       5.1 Measurement conditions
           5.1.1 Lamp ageing (seasoning)
           5.1.2 Test environment
           5.1.3 Extraneous radiation
           5.1.4 Lamp operation
           5.1.5 Lamp system operation
       5.2 Measurement procedure
           5.2.1 Irradiance measurements
           5.2.2 Radiance measurements
           5.2.3 Measurement of source size
           5.2.4 Pulse width measurement for pulsed sources
       5.3 Analysis methods
           5.3.1 Weighting curve interpolations
           5.3.2 Calculations
           5.3.3 Measurement uncertainty
    6. LAMP CLASSIFICATION
       6.1 Continuous wave lamps
           6.1.1 Exempt group
           6.1.2 Risk Group 1 (Low-Risk)
           6.1.3 Risk Group 2 (Moderate-Risk)
           6.1.4 Risk Group 3 (High-Risk)
       6.2 Pulsed lamps
    ANNEX A (informative) SUMMARY OF BIOLOGICAL EFFECTS
       Bioeffect datasheet #1: Infrared cataract
       Bioeffect datasheet #2: Photokeratitis
       Bioeffect datasheet #3: Photoretinitis
       Bioeffect datasheet #4: Retinal thermal injury
       Bioeffect datasheet #5: Ultraviolet cataract
       Bioeffect datasheet #6: Ultraviolet erythema
    ANNEX B (informative) MEASUREMENT METHOD
       B.1 Instrumentation
           B.1.1 Double monochromator: Recommended instrument
           B.1.2 Broadband detectors
       B.2 Instrument limitations
           B.2.1 Noise equivalent irradiance
           B.2.2 Instrument spectral response
           B.2.3 Wavelength accuracy
           B.2.4 Stray radiant power
           B.2.5 Input optics for spectral irradiance
                 measurements: Recommendation
           B.2.6 Linearity
       B.3 Calibration sources
    ANNEX C (informative) UNCERTAINTY ANALYSIS
    ANNEX D (informative) GENERAL REFERENCES

    Abstract - (Show below) - (Hide below)

    Gives guidance for evaluating the photobiological safety of lamps and lamp systems including luminaires. Specifically it specifies the exposure limits, reference measurement technique and classification scheme for the evaluation and control of photobiological hazards from all electrically powered incoherent broadband sources of optical radiation, including LEDs but excluding lasers, in the wavelength range from 200 nm through 3000 nm. This standard was prepared as Standard CIE S 009:2002 by the International Commission on Illumination.

    General Product Information - (Show below) - (Hide below)

    Development Note Also numbered as CIE S 009 (07/2006) Stability Date: 2017. (09/2017)
    Document Type Standard
    Publisher International Electrotechnical Committee
    Status Current

    Standards Referenced By This Book - (Show below) - (Hide below)

    09/30207781 DC : 0 BS EN 62560 - SELF-BALLASTED LED-LAMPS FOR GENERAL LIGHTING SERVICES BY VOLTAGE > 50 V - SAFETY SPECIFICATIONS
    IEC TS 61496-4-2:2014 Safety of machinery - Electro-sensitive protective equipment - Part 4-2: Particular requirements for equipment using vision based protective devices (VBPD) - Additional requirements when using reference pattern techniques (VBPDPP)
    11/30257881 DC : 0 BS EN 61195:1999/AMD 1 - DOUBLE-CAPPED FLUORESCENT LAMPS - SAFETY SPECIFICATIONS
    I.S. EN 61029-2-9:2012 SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 2-9: PARTICULAR REQUIREMENTS FOR MITRE SAWS (IEC 61029-2-9:1995 (MOD))
    BS ISO 16142-2:2017 Medical devices. Recognized essential principles of safety and performance of medical devices General essential principles and additional specific essential principles for all IVD medical devices and guidance on the selection of standards
    15/30325838 DC : 0 BS EN 62943 ED. 1.0 - VISIBLE LIGHT BEACON SYSTEM FOR MULTIMEDIA APPLICATIONS
    18/30356172 DC BS EN 63109. Assessment of blue light hazard of light sources and luminaires
    15/30328959 DC : 0 BS ISO 16142-2 - MEDICAL DEVICES - RECOGNIZED ESSENTIAL PRINCIPLES OF SAFETY AND PERFORMANCE OF MEDICAL DEVICES - PART 2: GENERAL ESSENTIAL PRINCIPLES AND ADDITIONAL SPECIFIC ESSENTIAL PRINCIPLES FOR ALL IVD MEDICAL DEVICES AND GUIDANCE ON THE SELECTION OF STANDARDS
    BS EN 60968:2015 Self-ballasted fluorescent lamps for general lighting services. Safety requirements
    12/30258455 DC : 0 FPREN 60065:2011+FPRAA - AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS
    I.S. EN 62838:2016 LEDSI LAMPS FOR GENERAL LIGHTING SERVICES WITH SUPPLY VOLTAGES NOT EXCEEDING 50 V A.C. R.M.S. OR 120 V RIPPLE FREE D.C. - SAFETY SPECIFICATIONS
    BS EN 61228:1995 Method of measuring and specifying the UV radiation of ultraviolet lamps used for sun-tanning
    DIN SPEC 67600:2013-04 Biologically effective illumination - Design guidelines
    UNI EN ISO 80601-2-61 : 2011 MEDICAL ELECTRICAL EQUIPMENT - PART 2-61: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT
    BS EN 62471-5:2015 Photobiological safety of lamps and lamp systems Image projectors
    NF EN 62031 : 2008 AMD 2 2015 LED MODULES FOR GENERAL LIGHTING - SAFETY SPECIFICATIONS
    16/30346073 DC : 0 BS ISO 16142-2 - MEDICAL DEVICES - RECOGNIZED ESSENTIAL PRINCIPLES OF SAFETY AND PERFORMANCE OF MEDICAL DEVICES - PART 2: GENERAL ESSENTIAL PRINCIPLES AND ADDITIONAL SPECIFIC ESSENTIAL PRINCIPLES FOR ALL IVD MEDICAL DEVICES AND GUIDANCE ON THE SELECTION OF STANDARDS
    17/30353444 DC : DRAFT SEP 2017 BS EN 13272-2 - RAILWAY APPLICATIONS - ELECTRICAL LIGHTING FOR ROLLING STOCK IN PUBLIC TRANSPORT SYSTEMS - PART 2: URBAN RAIL SYSTEMS
    13/30245306 DC : 0 BS EN ISO 9680 - DENTISTRY - OPERATING LIGHTS
    12/30258880 DC : 0 BS EN 60825-1 ED.3 - SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS
    I.S. EN 16844:2017 AESTHETIC MEDICINE SERVICES - NON-SURGICAL MEDICAL PROCEDURES
    11/30212367 DC : 0 BS EN ISO 13482 - ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR NON-INDUSTRIAL ROBOTS - NON-MEDICAL PERSONAL CARE ROBOT
    12/30268348 DC : 0 BS EN 62504 - GENERAL LIGHTING - LIGHT EMITTING DIODE (LED) PRODUCTS AND RELATED EQUIPMENT - TERMS AND DEFINITIONS
    I.S. EN 62798:2014 INDUSTRIAL ELECTROHEATING EQUIPMENT - TEST METHODS FOR INFRARED EMITTERS
    I.S. EN 60432-3:2013 INCANDESCENT LAMPS - SAFETY SPECIFICATIONS - PART 3: TUNGSTENHALOGEN LAMPS (NON-VEHICLE) (IEC 60432-3:2012 (EQV))
    ISO/IEC 29794-6:2015 Information technology Biometric sample quality Part 6: Iris image data
    DIN EN ISO 13482:2014-11 ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR PERSONAL CARE ROBOTS (ISO 13482:2014)
    ISO 10650:2015 Dentistry Powered polymerization activators
    I.S. EN 61199:2011 SINGLE-CAPPED FLUORESCENT LAMPS - SAFETY SPECIFICATIONS
    BS EN 62504:2014 General lighting. Light emitting diode (LED) products and related equipment. Terms and definitions
    BS EN 62560:2012+A11:2019 Self-ballasted LED-lamps for general lighting services by voltage > 50 V. Safety specifications
    I.S. EN 62943:2017 VISIBLE LIGHT BEACON SYSTEM FOR MULTIMEDIA APPLICATIONS
    I.S. EN 61195:2003 DOUBLE-CAPPED FLUORESCENT LAMPS - SAFETY SPECIFICATIONS
    BS EN 60065 : 2014 AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014, MODIFIED)
    I.S. EN 62560:2012&A1:2015&A11:2019 SELF-BALLASTED LED-LAMPS FOR GENERAL LIGHTING SERVICES BY VOLTAGE > 50 V - SAFETY SPECIFICATIONS
    IEC 60335-2-40:2018 Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
    ISO 16142-2:2017 Medical devices — Recognized essential principles of safety and performance of medical devices — Part 2: General essential principles and additional specific essential principles for all IVD medical devices and guidance on the selection of standards
    I.S. EN 62841-1:2015 ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
    BS EN ISO 80601-2-61:2011 Medical electrical equipment Particular requirements for basic safety and essential performance of pulse oximeter equipment
    IEC 60968:2015 Self-ballasted fluorescent lamps for general lighting services - Safety requirements
    IEC 62931:2017 GX16t-5 capped tubular LED lamp - Safety specifications
    UNE-EN 60968:2015 Self-ballasted fluorescent lamps for general lighting services - Safety requirements
    CEI EN 62693 : 2014 INDUSTRIAL ELECTROHEATING INSTALLATIONS - TEST METHODS FOR INFRARED ELECTROHEATING INSTALLATIONS
    IEC 62031:2008+AMD1:2012+AMD2:2014 CSV LED MODULES FOR GENERAL LIGHTING - SAFETY SPECIFICATIONS
    IEC 61010-2-120:2016 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-120: Particular safety requirements for machinery aspects of equipment
    AAMI ES60601-1 : 2005 : INC : AMD 1 : 2012 : R201200 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD)
    AAMI ES60601-1 : 2005 : INC : AMD 2 : 2012 : R201200 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD)
    AAMI ES60601-1 : 2005 : R2012 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD)
    CSA C22.2 No. 62368-1 : 2014 AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
    UNE-EN 61029-2-9:2013 Safety of transportable motor-operated electric tools - Part 2-9: Particular requirements for mitre saws
    DIN EN ISO 9680 E : 2015 DENTISTRY - OPERATING LIGHTS (ISO 9680:2014)
    BS EN 60519-1:2015 Safety in installations for electroheating and electromagnetic processing General requirements
    UNE-EN ISO 11252:2013 Lasers and laser-related equipment - Laser device - Minimum requirements for documentation (ISO 11252:2013)
    IEC 60432-2:1999+AMD1:2005+AMD2:2012 CSV Incandescent lamps - Safety specifications - Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes
    EN 61228:2008 Fluorescent ultraviolet lamps used for tanning - Measurement and specification method
    IEC 60335-2-40:2018 RLV Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
    EN 62693:2013 Industrial electroheating installations - Test methods for infrared electroheating installations
    EN 61029-2-11:2012/A11:2013 SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 2-11: PARTICULAR REQUIREMENTS FOR COMBINED MITRE AND BENCH SAWS
    EN 61010-2-012:2016 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-012: Particular requirements for climatic and environmental testing and other temperature conditioning equipment
    EN 62838:2016/AC:2017-11 LEDSI LAMPS FOR GENERAL LIGHTING SERVICES WITH SUPPLY VOLTAGES NOT EXCEEDING 50 V A.C. R.M.S. OR 120 V RIPPLE FREE D.C. - SAFETY SPECIFICATIONS
    EN 62035:2014 Discharge lamps (excluding fluorescent lamps) - Safety specifications
    EN 60968:2015 Self-ballasted fluorescent lamps for general lighting services - Safety requirements
    EN 60519-1:2015 Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements
    EN 61199:2011/A2:2015 SINGLE-CAPPED FLUORESCENT LAMPS - SAFETY SPECIFICATIONS (IEC 61199:2011/A2:2014)
    EN ISO 9680:2014 Dentistry - Operating lights (ISO 9680:2014)
    NF EN 61228 : 2008 FLUORESCENT ULTRAVIOLET LAMPS USED FOR TANNING - MEASUREMENT AND SPECIFICATION METHOD
    EN 62776:2015 Double-capped LED lamps designed to retrofit linear fluorescent lamps - Safety specifications
    EN 60950-1:2006/A2:2013 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60950-1:2005/A2:2013, MODIFIED)
    EN 62798:2014/AC:2014 INDUSTRIAL ELECTROHEATING EQUIPMENT - TEST METHODS FOR INFRARED EMITTERS (IEC 62798:2014)
    CEI EN 62841-1 : 2016 ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
    DIN EN 16237:2013-04 Classification of non-electrical sources of incoherent optical radiation
    NF EN ISO 80601-2-61 : 2011 MEDICAL ELECTRICAL EQUIPMENT - PART 2-61: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT
    BS EN 62693:2013 Industrial electroheating installations. Test methods for infrared electroheating installations
    11/30187418 DC : 0 BS ISO 12609-1 - EYEWEAR FOR PROTECTION AGAINST INTENSE LIGHT SOURCES USED ON HUMANS AND ANIMALS FOR COSMETIC AND MEDICAL APPLICATIONS - PART 1: SPECIFICATION FOR PRODUCTS
    18/30373839 DC : 0 BS EN 60601-2-41 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-41: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF SURGICAL LUMINAIRES AND LUMINAIRES FOR DIAGNOSIS
    UNE-EN 62504:2015 General lighting - Light emitting diode (LED) products and related equipment - Terms and definitions
    I.S. EN ISO 15004-2:2007 OPHTHALMIC INSTRUMENTS - FUNDAMENTAL REQUIREMENTS AND TEST METHODS - PART 2: LIGHT HAZARD PROTECTION
    12/30258456 DC : 0 BS EN 60950-1:2006/FPRAE:2011 - INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
    I.S. EN 61167:2016 METAL HALIDE LAMPS - PERFORMANCE SPECIFICATION
    BS EN 61029-2-11 : 2012 SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 2-11: PARTICULAR REQUIREMENTS FOR COMBINED MITRE AND BENCH SAWS
    BS ISO/IEC 29794-6:2015 Information technology. Biometric sample quality Iris image data
    12/30265031 DC : 0 BS EN 60825-12 ED.2 - SAFETY OF LASER PRODUCTS - PART 12: SAFETY OF FREE SPACE OPTICAL COMMUNICATION SYSTEMS USED FOR TRANSMISSION OF INFORMATION
    CEI EN 62532 : 2012 FLUORESCENT INDUCTION LAMPS - SAFETY SPECIFICATIONS
    14/30284310 DC : 0 BS ISO 10650 - DENTISTRY - POWERED POLYMERIZATION ACTIVATORS
    BS EN 16237:2013 Classification of non-electrical sources of incoherent optical radiation
    PD IEC/TR 62471-2:2009 Photobiological safety of lamps and lamp systems Guidance on manufacturing requirements relating to non-laser optical radiation safety
    BS EN 60519-12:2013 Safety in electroheating installations Particular requirements for infrared electroheating installations
    BS EN 61496-2:2013 Safety of machinery. Electro-sensitive protective equipment Particular requirements for equipment using active opto-electronic protective devices (AOPDs)
    11/30193150 DC : 0 BS EN 60601-1:2006 AMD.1 - MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
    PD ISO/TR 20824:2007 Ophthalmic instruments. Background for light hazard specification in ophthalmic instrument standards
    ANSI/AAMI/ISO 16142-2:2017 MEDICAL DEVICES - RECOGNIZED ESSENTIAL PRINCIPLES OF SAFETY AND PERFORMANCE OF MEDICAL DEVICES - PART 2: GENERAL ESSENTIAL PRINCIPLES AND ADDITIONAL SPECIFIC ESSENTIAL PRINCIPLES FOR ALL IVD MEDICAL DEVICES AND GUIDANCE ON THE SELECTION OF STANDARDS
    BS EN 61010-2-040:2015 Safety requirements for electrical equipment for measurement, control, and laboratory use Particular requirements for sterilizers and washer-disinfectors used to treat medical materials
    09/30206024 DC : 0 BS EN 61199 - SINGLE-CAPPED FLUORESCENT LAMPS - SAFETY SPECIFICATIONS
    11/30238977 DC : 0 BS EN 61496-2 - SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 2: PARTICULAR REQUIREMENTS FOR EQUIPMENT USING ACTIVE OPTO-ELECTRONIC PROTECTIVE DEVICES (AOPDS)
    I.S. EN 80601-2-60:2015 MEDICAL ELECTRICAL EQUIPMENT - PART 2-60: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF DENTAL EQUIPMENT
    SAE ARP 6259 : 2016 LED REPLACEMENT FOR INCANDESCENT/HALOGEN BULBS OR FLUORESCENT LAMPS TRANSPORT CATEGORY AIRCRAFT AND ROTORCRAFT
    BS EN 61167:2011 Metal halide lamps. Performance specification
    CEI 34-141 : 2014 APPLICATION OF IEC 62471 FOR THE ASSESSMENT OF BLUE LIGHT HAZARD TO LIGHT SOURCES AND LUMINAIRES
    I.S. EN 62931:2017 GX16T-5 CAPPED TUBULAR LED LAMP - SAFETY SPECIFICATIONS
    I.S. EN 60601-2-57:2011 MEDICAL ELECTRICAL EQUIPMENT - PART 2-57: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF NON-LASER LIGHT SOURCE EQUIPMENT INTENDED FOR THERAPEUTIC, DIAGNOSTIC, MONITORING AND COSMETIC/AESTHETIC USE
    BS EN 61195 : 2000 DOUBLE-CAPPED FLUORESCENT LAMPS - SAFETY SPECIFICATIONS
    BS EN 60432-1 : 2000 INCANDESCENT LAMPS - SAFETY SPECIFICATIONS - PART 1: TUNGSTEN FILAMENT LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES
    UNE-EN 62532:2011 Fluorescent induction lamps - Safety specifications
    I.S. EN 60432-2:2004 INCANDESCENT LAMPS - SAFETY SPECIFICATIONS - PART 2: TUNGSTEN HALOGEN LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES (IEC 60432-2:1999 (MOD))
    UNE-EN 62035:2015 Discharge lamps (excluding fluorescent lamps) - Safety specifications
    CEI EN 60432-3 : 2013 INCANDESCENT LAMPS - SAFETY SPECIFICATIONS - PART 3: TUNGSTEN-HALOGEN LAMPS (NON-VEHICLE)
    IEC 60598-1:2014+AMD1:2017 CSV Luminaires - Part 1: General requirements and tests
    IEC 60335-2-40 REDLINE : 6.0 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-40: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEAT PUMPS, AIR-CONDITIONERS AND DEHUMIDIFIERS
    BS EN 60432-3:2013 Incandescent lamps. Safety specifications Tungsten-halogen lamps (non-vehicle)
    CSA C22.2 No. 80601-2-61 : 2014(R2019) MEDICAL ELECTRICAL EQUIPMENT - PART 2-61: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT
    IEC 62943:2017 Visible light beacon system for multimedia applications
    AAMI ES60601-1 : 2005 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD)
    IEC TR 62471-2:2009 Photobiological safety of lamps and lamp systems - Part 2: Guidance on manufacturing requirements relating to non-laser optical radiation safety
    EN 61010-2-040:2015 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-040 Particular requirements for sterilizers and washer-disinfectors used to treat medical materials
    IEC 62031:2008+AMD1:2012+AMD2:2014 CSV LED modules for general lighting - Safety specifications
    14/30311240 DC : 0 BS EN 61010-1 ED 3 AMD 1 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
    DIN EN ISO 9680:2015-02 Dentistry - Operating lights (ISO 9680:2014)
    EN 60065:2014/AC:2017-01 AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014/COR2:2016)
    DIN EN ISO 15004-2:2007-06 Ophthalmic instruments - Fundamental requirements and test methods - Part 2: Light hazard protection (ISO 15004-2:2007)
    I.S. EN ISO 11252:2013 LASERS AND LASER-RELATED EQUIPMENT - LASER DEVICE - MINIMUM REQUIREMENTS FOR DOCUMENTATION (ISO 11252:2013)
    I.S. EN ISO 9680:2014 DENTISTRY - OPERATING LIGHTS (ISO 9680:2014)
    BIS IS 13252-1 : 2010 AMD 1 2013 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
    ANSI/IES RP-27.1:2022 RISK GROUP CLASSIFICATION AND MINIMIZATION OF PHOTOBIOLOGICAL HAZARDS FROM ULTRAVIOLET LAMPS AND LAMP SYSTEM
    CEI EN 61496-2 : 2014 SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 2: PARTICULAR REQUIREMENTS FOR EQUIPMENT USING ACTIVE OPTO-ELECTRONIC PROTECTIVE DEVICES (AOPDS)
    BS EN 61029-2-9 : 2012 SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 2-9: PARTICULAR REQUIREMENTS FOR MITRE SAWS
    17/30347375 DC : 0 BS EN 62368-1 ED 3.0 - AUDIO/VIDEO; INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
    BS EN ISO 10650:2015 Dentistry. Powered polymerization activators
    12/30239877 DC : 0 BS EN 60065 ED 8.0 - AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS
    11/30247491 DC : 0 BS EN 60432-3:2000/AMD3 - INCANDESCENT LAMPS - SAFETY SPECIFICATIONS - PART 3: TUNGSTEN FILAMENT LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSE
    BS EN 60601-2-57:2011 Medical electrical equipment Particular requirements for the basic safety and essential performance of non-laser light source equipment intended for therapeutic, diagnostic, monitoring and cosmetic/aesthetic use
    I.S. EN 62031:2008 LED MODULES FOR GENERAL LIGHTING - SAFETY SPECIFICATIONS (IEC 62031:2008 (EQV))
    IEC TR 62778:2014 Application of IEC 62471 for the assessment of blue light hazard to light sources and luminaires
    PD IEC/TR 62778:2014 Application of IEC 62471 for the assessment of blue light hazard to light sources and luminaires
    BS EN 62943:2017 Visible light beacon system for multimedia applications
    BS EN 62798:2014 Industrial electroheating equipment. Test methods for infrared emitters
    09/30165797 DC : 0 BS EN 60601-2-57 ED.1 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-57: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF NON-LASER LIGHT SOURCE EQUIPMENT INTENDED FOR THERAPEUTIC, DIAGNOSTIC, MONITORING AND COSMETIC/AESTHETIC USE
    16/30338446 DC : 0 BS ISO 20498-2 - TRADITIONAL CHINESE MEDICINE - COMPUTERISED TONGUE IMAGE ANALYSIS SYSTEM - PART 2: LIGHT ENVIRONMENT
    BS ISO 16142-1:2016 Medical devices. Recognized essential principles of safety and performance of medical devices General essential principles and additional specific essential principles for all non-IVD medical devices and guidance on the selection of standards
    CEI 76-10 : 2011 PHOTOBIOLOGICAL SAFETY OF LAMPS AND LAMP SYSTEMS - PART 2: GUIDANCE ON MANUFACTURING REQUIREMENTS RELATING TO NON-LASER OPTICAL RADIATION SAFETY
    PD IEC/TS 61496-4-2:2014 Safety of machinery. Electro-sensitive protective equipment Particular requirements for equipment using vision based protective devices (VBPD). Additional requirements when using reference pattern techniques (VBPDPP)
    14/30254042 DC : 0 BS EN ISO 15004-2 - OPHTHALMIC INSTRUMENTS - FUNDAMENTAL REQUIREMENTS AND TEST METHODS - PART 2: LIGHT HAZARD PROTECTION
    13/30287162 DC : 0 BS EN 62471-5 ED.1.0 - PHOTOBIOLOGICAL SAFETY OF LAMP SYSTEMS FOR IMAGE PROJECTORS
    CSA C22.2 No. 62560 : 2016 SELF-BALLASTED LED-LAMPS FOR GENERAL LIGHTING SERVICES BY VOLTAGE > 50 V - SAFETY SPECIFICATIONS
    DIN SPEC 67600:2013-04 BIOLOGICALLY EFFECTIVE ILLUMINATION - DESIGN GUIDELINES
    CSA C22.2 No. 80601-2-60 : 2014 MEDICAL ELECTRICAL EQUIPMENT - PART 2-60: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF DENTAL EQUIPMENT
    ISO/TR 20824:2007 Ophthalmic instruments Background for light hazard specification in ophthalmic instrument standards
    I.S. EN 61228:2008 FLUORESCENT ULTRAVIOLET LAMPS USED FOR TANNING - MEASUREMENT AND SPECIFICATION METHOD
    I.S. EN 13032-2:2017 LIGHT AND LIGHTING - MEASUREMENT AND PRESENTATION OF PHOTOMETRIC DATA OF LAMPS AND LUMINAIRES - PART 2: PRESENTATION OF DATA FOR INDOOR AND OUTDOOR WORK PLACES
    DIN EN ISO 10650 E : 2016 DENTISTRY - POWERED POLYMERIZATION ACTIVATORS (ISO 10650:2015)
    I.S. EN 61029-2-11:2012 SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 2-11: PARTICULAR REQUIREMENTS FOR COMBINED MITRE AND BENCH SAWS (IEC 61029-2-11:2001 (MOD))
    I.S. EN 62776:2015 DOUBLE-CAPPED LED LAMPS DESIGNED TO RETROFIT LINEAR FLUORESCENT LAMPS - SAFETY SPECIFICATIONS
    I.S. EN 60601- 1:2006&A1:2013&AC:2014&A12:2014 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
    ISO 16142-1:2016 Medical devices — Recognized essential principles of safety and performance of medical devices — Part 1: General essential principles and additional specific essential principles for all non-IVD medical devices and guidance on the selection of standards
    I.S. EN 62504:2014 GENERAL LIGHTING - LIGHT EMITTING DIODE (LED) PRODUCTS AND RELATED EQUIPMENT - TERMS AND DEFINITIONS (IEC 62504:2014/A1:2018)
    UNE-EN 62471-5:2016 Photobiological safety of lamps and lamp systems - Part 5: Image projectors
    IEC 60335-2-27:2009+AMD1:2012+AMD2:2015 CSV Household and similar electrical appliances - Safety - Part 2-27: Particular requirements for appliances for skin exposure to optical radiation
    BS EN 60598-1:2015 Luminaires General requirements and tests
    IEC 62031:2018 RLV LED modules for general lighting - Safety specifications
    EN 62504:2014/A1:2018 GENERAL LIGHTING - LIGHT EMITTING DIODE (LED) PRODUCTS AND RELATED EQUIPMENT - TERMS AND DEFINITIONS
    I.S. EN 60950-1:2006 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60950-1:2005 (MOD))
    CSA C22.2 No. 60601-2-57:2011 MEDICAL ELECTRICAL EQUIPMENT - PART 2-57: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF NON-LASER LIGHT SOURCE EQUIPMENT INTENDED FOR THERAPEUTIC, DIAGNOSTIC, MONITORING AND COSMETIC/AESTHETIC USE
    PREN 12978 : DRAFT 2017 INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY DEVICES FOR POWER OPERATED DOORS AND GATES - REQUIREMENTS AND TEST METHODS
    IEC 62115:2017 Electric toys - Safety
    EN 62931:2017 GX16t-5 capped tubular led lamp - Safety specifications
    EN 16844:2017 Aesthetic medicine services - Non-surgical medical treatments
    IEC 62368-1:2014 Audio/video, information and communication technology equipment - Part 1: Safety requirements
    IEC 60601-2-75:2017 Medical electrical equipment - Part 2-75: Particular requirements for the basic safety and essential performance of photodynamic therapy and photodynamic diagnosis equipment
    DIN EN ISO 15004-2:2014-04 (Draft) OPHTHALMIC INSTRUMENTS - FUNDAMENTAL REQUIREMENTS AND TEST METHODS - PART 2: LIGHT HAZARD PROTECTION
    IEC 62504:2014 General lighting - Light emitting diode (LED) products and related equipment - Terms and definitions
    UNE-EN 62841-1:2016 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 1: General requirements
    CEI EN 60519-1 : 2016 SAFETY IN INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - PART 1: GENERAL REQUIREMENTS
    CSA C22.2 No. 60950-1 :2007 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
    CSA C22.2 No. 60950-1 : 2007 : INC : AMD 1 : 2011 : R2012 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
    UNE-EN 60950-1:2007 Information technology equipment - Safety - Part 1: General requirements
    EN 61496-2:2013 Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs)
    CSA C22.2 No. 60950-1 : 2007 : INC : AMD 2 : 2014 : R201200 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
    CSA C22.2 No. 60950-1 : 2007 : R2012 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
    CSA C22.2 No. 60950-1 : 2007 : INC : UPD 1 : 2011 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
    CSA C22.2 No. 60950-1 : 2007 : INC : AMD 2 : 2014 : R2016 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
    EN 61167:2016 Metal halide lamps - Performance specification
    UNI EN ISO 11252 : 2013 LASERS AND LASER-RELATED EQUIPMENT - LASER DEVICE - MINIMUM REQUIREMENTS FOR DOCUMENTATION
    UNI EN 16237 : 2013 CLASSIFICATION OF NON-ELECTRICAL SOURCES OF INCOHERENT OPTICAL RADIATION
    IES TM 16 : 2017 SOLID STATE LIGHTING SOURCES AND SYSTEMS
    IES HB 10 : 2011 THE LIGHTING HANDBOOK
    PD IEC/TR 60825-13:2011 Safety of laser products Measurements for classification of laser products
    BIS IS 16148 : 2014 METAL HALIDE LAMPS - PERFORMANCE SPECIFICATION
    SAE ARP 5029 : 2014 MEASUREMENT PROCEDURES FOR STROBE ANTICOLLISION LIGHTS
    13/30260433 DC : 0 BS ISO/IEC 29794-6 - INFORMATION TECHNOLOGY - BIOMETRIC SAMPLE QUALITY STANDARD - PART 6: IRIS IMAGE DATA
    09/30192488 DC : 0 BS EN 62595 ED.1 - MEASUREMENT METHODS OF LED BACKLIGHT UNIT FOR LIQUID CRYSTAL DISPLAYS
    12/30239867 DC : 0 BS EN 62368-1 - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
    11/30247487 DC : 0 BS EN 60432-2:2000/AMD2 - INCANDESCENT LAMPS - SAFETY SPECIFICATIONS - PART 2: TUNGSTEN-HALOGEN LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES
    BS EN 62031 : 2008 LED MODULES FOR GENERAL LIGHTING - SAFETY SPECIFICATIONS
    CEI EN 62471-5 : 2016 PHOTOBIOLOGICAL SAFETY OF LAMPS AND LAMP SYSTEMS - PART 5: IMAGE PROJECTORS
    07/30162194 DC : 0 BS 8497-1 - EYEWEAR FOR PROTECTION AGAINST INTENSE LIGHT SOURCES USED ON HUMANS AND ANIMALS FOR COSMETIC AND MEDICAL APPLICATIONS - PART 1: SPECIFICATION
    I.S. EN 62693:2013 INDUSTRIAL ELECTROHEATING INSTALLATIONS - TEST METHODS FOR INFRARED ELECTROHEATING INSTALLATIONS (IEC 62693:2013 (EQV))
    14/30297042 DC : 0 BS EN 60335-2-27/ED5/A2 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-27: PARTICULAR REQUIREMENTS FOR SKIN EXPOSURE TO ULTRAVIOLET AND INFRARED RADIATION
    16/30345783 DC : 0 BS EN 13032-2 - LIGHT AND LIGHTING - MEASUREMENT AND PRESENTATION OF PHOTOMETRIC DATA OF LAMPS AND LUMINAIRES - PART 2: PRESENTATION OF DATA FOR INDOOR AND OUTDOOR WORK PLACES
    BS EN 80601-2-60:2015 Medical electrical equipment Particular requirements for the basic safety and essential performance of dental equipment
    13/30277819 DC : 0 BS EN 62776 ED 1.0 - DOUBLE-CAPPED LED LAMPS FOR GENERAL LIGHTING SERVICES - SAFETY SPECIFICATIONS
    I.S. EN 61010-2-040:2015 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 2-040: PARTICULAR REQUIREMENTS FOR STERILIZERS AND WASHER-DISINFECTORS USED TO TREAT MEDICAL MATERIALS
    BS ISO 20498-2:2017 Traditional Chinese medicine. Computerized tongue image analysis system Light environment
    14/30290166 DC : 0 BS ISO 16142-1 - MEDICAL DEVICES - RECOGNIZED ESSENTIAL PRINCIPLES OF SAFETY AND PERFORMANCE OF MEDICAL DEVICES - PART 1: GENERAL ESSENTIAL PRINCIPLES AND ADDITIONAL SPECIFIC ESSENTIAL PRINCIPLES FOR ALL NON-IVD MEDICAL DEVICES AND GUIDANCE ON THE SELECTION OF STANDARDS
    12/30273415 DC : 0 BS EN 60968 - SELF-BALLASTED FLUORESCENT LAMPS FOR GENERAL LIGHTING SERVICES - SAFETY REQUIREMENTS
    UNE-EN 60065:2015 Audio, video and similar electronic apparatus - Safety requirements
    08/30175845 DC : DRAFT JAN 2008 BS IEC 62471-2 - PHOTO BIOLOGICAL SAFETY OF LAMPS AND LAMP SYSTEMS - PART 2: GUIDANCE ON MANUFACTURING REQUIREMENTS RELATING TO NON-LASER OPTICAL RADIATION SAFETY
    UNE-EN ISO 13482:2014 Robots and robotic devices - Safety requirements for personal care robots (ISO 13482:2014)
    14/30313143 DC : 0 BS EN 62931 - GX16T-5 CAPPED TUBULAR LED LAMP - SAFETY SPECIFICATIONS
    17/30352734 DC : 0 BS EN 60947-5-2 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-2: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - PROXIMITY SWITCHES
    PD IEC/TS 61496-4-3:2015 Safety of machinery. Electro-sensitive protective equipment Particular requirements for equipment using vision based protective devices (VBPD). Additional requirements when using stereo vision techniques (VBPDST)
    12/30259737 DC : 0 BS EN 62031:2008+A2 - LED MODULES FOR GENERAL LIGHTING - SAFETY SPECIFICATIONS
    BS EN ISO 13482:2014 Robots and robotic devices. Safety requirements for personal care robots
    12/30258453 DC : 0 BS EN 62368-1 AMD - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
    EN ISO 10650:2015 Dentistry - Powered polymerization activators (ISO 10650:2015)
    BS EN 61010-2-012:2016 Safety requirements for electrical equipment for measurement, control and laboratory use Particular requirements for climatic and environmental testing and other temperature conditioning equipment
    CSA E60598.1 : 2016 LUMINAIRES - PART 1: GENERAL REQUIREMENTS AND TESTS
    PREN 13032-2 : DRAFT 2016 LIGHT AND LIGHTING - MEASUREMENT AND PRESENTATION OF PHOTOMETRIC DATA OF LAMPS AND LUMINAIRES - PART 2: PRESENTATION OF DATA FOR INDOOR AND OUTDOOR WORK PLACES
    CSA C22.2 No. 60065 : 2016 AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS
    I.S. EN 60968:2015 SELF-BALLASTED FLUORESCENT LAMPS FOR GENERAL LIGHTING SERVICES - SAFETY REQUIREMENTS
    I.S. EN 16844:2017+A2:2019 Aesthetic medicine services - Non-surgical medical treatments
    I.S. EN 60598-1:2015 LUMINAIRES - PART 1: GENERAL REQUIREMENTS AND TESTS
    I.S. EN 60065:2014 AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS
    CEI EN 80601-2-60 : 2016 MEDICAL ELECTRICAL EQUIPMENT - PART 2-60: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF DENTAL EQUIPMENT
    BS EN 60432-2 : 2000 INCANDESCENT LAMPS - SAFETY SPECIFICATIONS - PART 2: TUNGSTEN HALOGEN LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES
    I.S. EN 61010-2-012:2016 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 2-012: PARTICULAR REQUIREMENTS FOR CLIMATIC AND ENVIRONMENTAL TESTING AND OTHER TEMPERATURE CONDITIONING EQUIPMENT
    I.S. EN 62532:2011 FLUORESCENT INDUCTION LAMPS - SAFETY SPECIFICATIONS
    I.S. EN 62368-1:2014 AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED)
    I.S. EN ISO 13482:2014 ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR PERSONAL CARE ROBOTS (ISO 13482:2014)
    I.S. EN 16237:2013 CLASSIFICATION OF NON-ELECTRICAL SOURCES OF INCOHERENT OPTICAL RADIATION
    I.S. EN 60519-1:2015 SAFETY IN INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - PART 1: GENERAL REQUIREMENTS
    CEI EN 61010-2-012 : 1ED 2017 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 2-012: PARTICULAR REQUIREMENTS FOR CLIMATIC AND ENVIRONMENTAL TESTING AND OTHER TEMPERATURE CONDITIONING EQUIPMENT
    CEI EN 60519-12 : 2014 SAFETY IN ELECTROHEATING INSTALLATIONS - PART 12: PARTICULAR REQUIREMENTS FOR INFRARED ELECTROHEATING INSTALLATIONS
    BS EN 61199 : 2011 SINGLE-CAPPED FLUORESCENT LAMPS - SAFETY SPECIFICATIONS
    17/30362673 DC : 0 BS EN 12978 - INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY DEVICES FOR POWER OPERATED DOORS AND GATES - REQUIREMENTS AND TEST METHODS
    EN 62368-1:2014/AC:2017-03 AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED)
    DIN EN ISO 10650:2016-02 DENTISTRY - POWERED POLYMERIZATION ACTIVATORS (ISO 10650:2015)
    EN 13032-2:2017 Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 2: Presentation of data for indoor and outdoor work places
    UNE-EN 60598-1:2015 Luminaires - Part 1: General requirements and tests
    SAE ARP 1283 : 2014 CARGO COMPARTMENT LIGHTING FOR TRANSPORT CATEGORY AIRCRAFT AND ROTORCRAFT
    EN ISO 80601-2-61:2011 Medical electrical equipment - Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment (ISO 80601-2-61:2011)
    IEC 62035:2014+AMD1:2016 CSV Discharge lamps (excluding fluorescent lamps) - Safety specifications
    IEC 60950-1:2005+AMD1:2009+AMD2:2013 CSV Information technology equipment - Safety - Part 1: General requirements
    IEC 62560:2011+AMD1:2015 CSV Self-ballasted LED-lamps for general lighting services by voltage >50 V - Safety specifications
    12/30272980 DC : 0 BS EN 6XXXX-1 - ELECTRIC MOTOR-OPERATED HAND-HELD, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
    PD IEC/TS 62850:2013 Safety requirements for electrical equipment for measurement, control, and laboratory use. General requirements for equipment intended to be used in educational establishments by children
    BS EN 60601-1 : 2006 MEDICAL ELECTRICAL EQUIPMENT PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
    IEC 60519-1:2015 Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements
    13/30277685 DC : 0 BS EN 60519-1 - SAFETY IN INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - PART 1: GENERAL REQUIREMENTS
    IEC 61199:2011+AMD1:2012+AMD2:2014 CSV Single-capped fluorescent lamps - Safety specifications
    BS EN 62838:2016 LEDsi lamps for general lighting services with supply voltages not exceeding 50 V a.c. r.m.s. or 120 V ripple free d.c. Safety specifications
    IEC TS 62850:2013 Safety requirements for electrical equipment for measurement, control, and laboratory use - General requirements for equipment intended to be used in educational establishments by children
    IEC 62532:2011+AMD1:2016 CSV Fluorescent induction lamps - Safety specifications
    IEC 60432-1:1999+AMD1:2005+AMD2:2011 CSV Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes
    IEC 80601-2-60:2012 Medical electrical equipment - Part 2-60: Particular requirements for the basic safety and essential performance of dental equipment
    IEC 61195:1999+AMD1:2012+AMD2:2014 CSV Double-capped fluorescent lamps - Safety specifications
    EN 62031:2008/A2:2015 LED MODULES FOR GENERAL LIGHTING - SAFETY SPECIFICATIONS (IEC 62031:2008/A2:2014)
    BS EN ISO 15004-2:2007 Ophthalmic instruments. Fundamental requirements and test methods Light hazard protection
    IEC 61010-2-040:2015 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials
    BS EN ISO 9680:2014 Dentistry. Operating lights
    UNE-EN 62838:2016 LEDsi lamps for general lighting services with supply voltages not exceeding 50 v a.c. r.m.s. or 120 v ripple free D.C. - Safety specifications
    ISO 13482:2014 Robots and robotic devices Safety requirements for personal care robots
    ISO 15004-2:2007 Ophthalmic instruments Fundamental requirements and test methods Part 2: Light hazard protection
    EN 80601-2-60:2015 Medical electrical equipment - Part 2-60: Particular requirements for the basic safety and essential performance of dental equipment
    CAN/CSA-C22.2 No. 62841-1 : 2015 ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
    IEC 62693:2013 Industrial electroheating installations - Test methods for infrared electroheating installations
    UNE-EN 60601-2-57:2012 Medical electrical equipment - Part 2-57: Particular requirements for the basic safety and essential performance of non-laser light source equipment intended for therapeutic, diagnostic, monitoring and cosmetic/aesthetic use
    ISO 11252:2013 Lasers and laser-related equipment — Laser device — Minimum requirements for documentation
    IEC 60601-2-57:2011 Medical electrical equipment - Part 2-57: Particular requirements for the basic safety and essential performance of non-laser light source equipment intended for therapeutic, diagnostic, monitoring and cosmetic/aesthetic use
    BS EN 60950-1 : 2006 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
    BS EN ISO 11252:2013 Lasers and laser-related equipment. Laser device. Minimum requirements for documentation
    ISO 9680:2014 Dentistry Operating lights
    12/30266672 DC : 0 BS EN 60598-1 ED 8.0 - LUMINAIRES - PART 1: GENERAL REQUIREMENTS AND TESTS
    IEC 61228:2008 Fluorescent ultraviolet lamps used for tanning - Measurement and specification method
    BS EN 62841-1:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety General requirements
    EN 16237:2013 Classification of non-electrical sources of incoherent optical radiation
    UNI EN ISO 9680 : 2015 DENTISTRY - OPERATING LIGHTS
    EN ISO 15004-2:2007 Ophthalmic instruments - Fundamental requirements and test methods - Part 2: Light hazard protection (ISO 15004-2:2007)
    EN ISO 13482:2014 Robots and robotic devices - Safety requirements for personal care robots (ISO 13482:2014)
    IEEE 1789-2015 IEEE Recommended Practices for Modulating Current in High-Brightness LEDs for Mitigating Health Risks to Viewers
    I.S. EN ISO 80601-2-61:2011 MEDICAL ELECTRICAL EQUIPMENT - PART 2-61: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT
    I.S. EN ISO 10650:2015 DENTISTRY - POWERED POLYMERIZATION ACTIVATORS (ISO 10650:2015)
    UNI EN ISO 13482 : 2014 ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR PERSONAL CARE ROBOTS
    11/30232867 DC : 0 BS EN 60519-12 - SAFETY IN ELECTRO HEATING INSTALLATIONS - PART 12: PARTICULAR REQUIREMENTS FOR INFRARED ELECTRO HEATING INSTALLATIONS
    BS 8497-1:2008 Eyewear for protection against intense light sources used on humans and animals for cosmetic and medical applications Specification for products
    11/30247483 DC : 0 BS EN 60432-1:2000/AMD2 - INCANDESCENT LAMPS - SAFETY SPECIFICATIONS - PART 1: TUNGSTEN FILAMENT LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES
    UNE-EN 61199:2012 Single-capped fluorescent lamps - Safety specifications
    13/30279160 DC : 0 BS EN 6101-2-0120 ED.1 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, LABORATORY USE - PART 2-0120: PARTICULAR SAFETY REQUIREMENTS FOR MACHINERY
    I.S. EN 62471-5:2015 PHOTOBIOLOGICAL SAFETY OF LAMPS AND LAMP SYSTEMS - PART 5: IMAGE PROJECTORS
    13/30277696 DC : 0 BS EN 60398 - INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - GENERAL TEST METHODS
    PD CEN/TS 17108:2017 Non-destructive testing. Lighting in penetrant and magnetic particle testing, good practice
    BS EN 62931:2017 GX16t-5 capped tubular led lamp. Safety specifications
    BS EN 62776:2015 Double-capped LED lamps designed to retrofit linear fluorescent lamps. Safety specifications
    I.S. EN 60432-1:2004 INCANDESCENT LAMPS - SAFETY SPECIFICATIONS - PART 1 - TUNGSTEN FILAMENT LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES (IEC 60432-1:1999 (MOD))
    CSA C22.2 No. 60601-2-57 : 2011 : R2016 MEDICAL ELECTRICAL EQUIPMENT - PART 2-57: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF NON-LASER LIGHT SOURCE EQUIPMENT INTENDED FOR THERAPEUTIC, DIAGNOSTIC, MONITORING AND COSMETIC/AESTHETIC USE
    13/30282399 DC : 0 BS EN 62868 ED 1.0 - ORGANIC LIGHT EMITTING DIODE (OLED) PANELS FOR GENERAL LIGHTING - SAFETY REQUIREMENTS
    IEC TR 60825-13:2011 Safety of laser products - Part 13: Measurements for classification of laser products
    I.S. EN 60519-12:2013 SAFETY IN ELECTROHEATING INSTALLATIONS - PART 12: PARTICULAR REQUIREMENTS FOR INFRARED ELECTROHEATING INSTALLATIONS (IEC 60519-12:2013 (EQV))
    CEI EN 62368-1 : 2016 AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
    BS EN 62532 : 2011 FLUORESCENT INDUCTION LAMPS - SAFETY SPECIFICATIONS
    IEEE 802.15.7-2011 IEEE Standard for Local and Metropolitan Area Networks--Part 15.7: Short-Range Wireless Optical Communication Using Visible Light
    UNE-EN 62776:2015 Double-capped LED lamps designed to retrofit linear fluorescent lamps - Safety specifications
    I.S. EN 61496-2:2013 SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 2: PARTICULAR REQUIREMENTS FOR EQUIPMENT USING ACTIVE OPTO-ELECTRONIC PROTECTIVE DEVICES (AOPDS)
    CSA C22.2 No. 61010.2.040 : 2016 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 2-040: PARTICULAR REQUIREMENTS FOR STERILIZERS AND WASHER-DISINFECTORS USED TO TREAT MEDICAL MATERIALS
    EN 60598-1:2015/A1:2018 LUMINAIRES - PART 1: GENERAL REQUIREMENTS AND TESTS
    I.S. EN 62035:2014 DISCHARGE LAMPS (EXCLUDING FLUORESCENT LAMPS) - SAFETY SPECIFICATIONS
    UNE-EN 60432-3:2013 Incandescent lamps - Safety specifications - Part 3: Tungsten-halogen lamps (non-vehicle)
    ISO 20498-2:2017 Traditional Chinese medicine — Computerized tongue image analysis system — Part 2: Light environment
    UNE-EN ISO 10650:2016 Dentistry - Powered polymerization activators (ISO 10650:2015)
    CSA C22.2 No. 60601.1 : 2014 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
    S.R. CEN/TR 17108:2017 NON-DESTRUCTIVE TESTING - LIGHTING IN PENETRANT AND MAGNETIC PARTICLE TESTING, GOOD PRACTICE
    NF EN 60065 : 2015 AMD 11 2018 AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS
    NF EN 60519-12 : 2013 SAFETY IN ELECTROHEATING INSTALLATIONS - PART 12: PARTICULAR REQUIREMENTS FOR INFRARED ELECTROHEATING INSTALLATIONS
    BS EN 16844 : 2017 AESTHETIC MEDICINE SERVICES - NON-SURGICAL MEDICAL TREATMENTS
    BS EN 62035:2014 Discharge lamps (excluding fluorescent lamps). Safety specifications
    IEC TS 61496-4-3:2015 Safety of machinery - Electro-sensitive protective equipment - Part 4-3: Particular requirements for equipment using vision based protective devices (VBPD) - Additional requirements when using stereo vision techniques (VBPDST)
    DIN EN ISO 11252:2014-02 LASERS AND LASER-RELATED EQUIPMENT - LASER DEVICE - MINIMUM REQUIREMENTS FOR DOCUMENTATION (ISO 11252:2013)
    IEC 62676-5:2018 Video surveillance systems for use in security applications - Part 5: Data specifications and image quality performance for camera devices
    07/30091745 DC : 0 BS IEC 62368 - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - SAFETY - REQUIREMENTS
    IEC 60432-3:2012 Incandescent lamps - Safety specifications - Part 3: Tungsten halogen lamps (non-vehicle)
    IEC 61496-2:2013 Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs)
    IEC 61010-1:2010+AMD1:2016 CSV Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
    IEC 60601-1:2005+AMD1:2012 CSV Medical electrical equipment - Part 1: General requirements for basic safety and essential performance
    EN 62532:2011/A1:2017 FLUORESCENT INDUCTION LAMPS - SAFETY SPECIFICATIONS
    CEN/TR 17108:2017 Non-destructive testing - Lighting in penetrant and magnetic particle testing, good practice
    EN 61195:1999/A2:2015 DOUBLE-CAPPED FLUORESCENT LAMPS - SAFETY SPECIFICATIONS (IEC 61195:1999/A2:2014)
    EN 61029-2-9:2012/A11:2013 SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 2-9: PARTICULAR REQUIREMENTS FOR MITRE SAWS (IEC 61029-2-9:1995, MODIFIED)
    EN 60432-2:2000/A2:2012 INCANDESCENT LAMPS - SAFETY SPECIFICATIONS - PART 2: TUNGSTEN HALOGEN LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES
    EN ISO 11252:2013 Lasers and laser-related equipment - Laser device - Minimum requirements for documentation (ISO 11252:2013)
    EN 62841-1:2015/AC:2015 ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
    EN 60432-1:2000/A2:2012 INCANDESCENT LAMPS - SAFETY SPECIFICATIONS - PART 1 - TUNGSTEN FILAMENT LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES (IEC 60432-1:1999/A2:2011)
    NF EN 60519-1 : 2015 SAFETY IN INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - PART 1: GENERAL REQUIREMENTS
    EN 62943:2017 Visible light beacon system for multimedia applications
    EN 62471-5:2015 Photobiological safety of lamps and lamp systems - Part 5: Image projectors
    EN 60601-2-57:2011 Medical electrical equipment - Part 2-57: Particular requirements for the basic safety and essential performance of non-laser light source equipment intended for therapeutic, diagnostic, monitoring and cosmetic/aesthetic use
    EN 60432-3:2013 Incandescent lamps - Safety specifications - Part 3: Tungsten-halogen lamps (non-vehicle)

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 17166:1999 Erythema reference action spectrum and standard erythema dose
    IEC TR 60825-9:1999 Safety of laser products - Part 9: Compilation of maximum permissible exposure to incoherent optical radiation
    AS/NZS 62676.5:2020 Video surveillance systems for use in security applications Data specifications and image quality performance for camera devices (IEC 62676-5:2018, MOD)
    AS/NZS 60335.2.27:2020 Household and similar electrical appliances - Safety Particular requirements for appliances for skin exposure to optical radiation (IEC 60335-2-27 Ed 6, MOD)
    AS/NZS 62838:2020 LEDsi lamps for general lighting services with supply voltages not exceeding 50 V a.c. r.m.s. or 120 V ripple free d.c. - Safety specifications (IEC 62838:2015 (ED.1.0)/COR1:2017, MOD)
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective