Skip to content
Please enter a keyword to search

  • IEC GUIDE 109:2012

    Current The latest, up-to-date edition.

    Environmental aspects - Inclusion in electrotechnical product standards

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s):  English - French

    Published date:  14-06-2012

    Publisher:  International Electrotechnical Committee

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    INTRODUCTION
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 Product standards and the environment
    5 Inputs and outputs to be considered in
      the development of product standards
    Annex A - Checklist for the consideration
              of environmental aspects in
              product standards
    Bibliography

    Abstract - (Show below) - (Hide below)

    IEC Guide 109:2012 is intended for standards writers and gives guidance on how to consider aspects relating to the impact on the environment of electrotechnical products when preparing standards for such products.

    General Product Information - (Show below) - (Hide below)

    Document Type Guide
    Publisher International Electrotechnical Committee
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    BS EN 50180-1:2015 Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers General requirements for bushings
    IEC 62933-1:2018 Electrical energy storage (EES) systems - Part 1: Vocabulary
    BS EN 61869-1:2009 Instrument transformers General requirements
    ECMA 341 : 4ED 2010 ENVIRONMENTAL DESIGN CONSIDERATIONS FOR ICT & CE PRODUCTS
    BS ISO 17422:2002 Plastics. Environmental aspects. General guidelines for their inclusion in standards
    I.S. EN 61121:2013 TUMBLE DRYERS FOR HOUSEHOLD USE - METHODS FOR MEASURING THE PERFORMANCE (IEC 61121:2012 (MOD))
    EN IEC/IEEE 65700 : 2018 BUSHINGS FOR DC APPLICATION (IEC/IEEE 65700-19-03:2014)
    I.S. EN 61753-111-7:2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 111-7: SEALED CLOSURES FOR CATEGORY A - AERIAL
    PREN 50598-3 : DRAFT 2013 ECODESIGN FOR POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS & THEIR DRIVEN APPLICATIONS - PART 3: QUANTITATIVE ECO DESIGN APPROACH THROUGH LIFE CYCLE ASSESSMENT INCLUDING PRODUCT CATEGORY RULES AND THE CONTENT OF ENVIRONMENTAL DECLARATIONS
    00/201724 DC : DRAFT APR 2000 IEC 61076-1 - CONNECTORS - PRODUCT REQUIREMENTS - PART 1: GENERIC SPECIFICATION
    CEI EN 60695-1-1 : 2000 FIRE HAZARD TESTING - PART 1-1: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS GENERAL GUIDELINES
    BS EN 61758-1:2008 Fibre optic interconnecting devices and passive components. Interface standard for closures General and guidance
    BS IEC/IEEE 65700-19-03 : 2014 BUSHINGS FOR DC APPLICATION
    11/30247685 DC : 0 BS EN 65700-19-03 - BUSHINGS FOR DC APPLICATION
    PD IEC GUIDE 118:2017 Inclusion of energy efficiency aspects in electrotechnical publications
    BS EN 50180:1999 Bushings above 1 kV up to 36 kV and from 250 A to 3,15 kA for liquid filled transformers
    BS EN 62430:2009 Environmentally conscious design for electrical and electronic products
    05/30139731 DC : DRAFT SEP 2005
    CEI EN 61753-101-3 : 2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 101-3: FIBRE MANAGEMENT SYSTEMS FOR CATEGORY U - UNCONTROLLED ENVIRONMENT
    PREN 50386 : DRAFT 2010 BUSHINGS UP TO 1 KV AND FROM 250 A TO 5 KA, FOR LIQUID FILLED TRANSFORMERS
    CEI EN 62040-4 : 2014 UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 4: ENVIRONMENTAL ASPECTS - REQUIREMENTS AND REPORTING
    I.S. EN 60456:2016 CLOTHES WASHING MACHINES FOR HOUSEHOLD USE - METHODS FOR MEASURING THE PERFORMANCE
    I.S. EN 60601-1-10:2008 MEDICAL ELECTRICAL EQUIPMENT - PART 1-10: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR THE DEVELOPMENT OF PHYSIOLOGIC CLOSED-LOOP CONTROLLERS
    I.S. EN 62430:2009 ENVIRONMENTALLY CONSCIOUS DESIGN FOR ELECTRICAL AND ELECTRONIC PRODUCTS
    I.S. EN 60352-5:2012-2015-10 SOLDERLESS CONNECTIONS - PART 5: PRESS-IN CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE (IEC 60352-5:2012 (EQV))
    I.S. EN 61076-3-120:2016 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-120: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR REWIRABLE POWER CONNECTORS WITH SNAP LOCKING FOR RATED VOLTAGE OF 250 V D.C. AND RATED CURRENT OF 30 A
    EN IEC 62933-1:2018 Electrical Energy Storage (EES) systems - Part 1: Vocabulary
    I.S. EN 60352-8:2011 SOLDERLESS CONNECTIONS - PART 8: COMPRESSION MOUNT CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE
    BS EN 61076-1:2006 Connectors for electronic equipment. Product requirements Generic specification
    I.S. EN 50181:2010 PLUG-IN TYPE BUSHINGS ABOVE 1 KV UP TO 52 KV AND FROM 250 A TO 2,50 KA FOR EQUIPMENT OTHER THAN LIQUID FILLED TRANSFORMERS
    IEC 60456:2010 Clothes washing machines for household use - Methods for measuring the performance
    EN 61758-1:2008 Fibre optic interconnecting devices and passive components - Interface standard for closures - Part 1: General and guidance
    EN 62040-4:2013 Uninterruptible power systems (UPS) - Part 4: Environmental aspects - Requirements and reporting
    EN 61753-131-3:2011 Fibre optic interconnecting devices and passive components - Performance standard - Part 131-3: Single-mode mechanical fibre splice for category U - Uncontrolled environment
    EN 61753-111-9:2010 Fibre optic interconnecting devices and passive components - Performance standard - Part 111-9: Sealed closures for category S - Subterranean
    EN 62542 : 2013 ENVIRONMENTAL STANDARDIZATION FOR ELECTRICAL AND ELECTRONIC PRODUCTS AND SYSTEMS - GLOSSARY OF TERMS (IEC 62542:2013)
    CEN Guide 4:2008 GUIDE FOR ADDRESSING ENVIRONMENTAL ISSUES IN PRODUCT STANDARDS
    EN 61557-15:2014 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 15: Functional safety requirements for insulation monitoring devices in IT systems and equipment for insulation fault location in IT systems
    EN 61753-101-3:2008 Fibre optic interconnecting devices and passive components performance standard - Part 101-3: Fibre management systems for Category U - Uncontrolled environment
    EN 61076-1:2006 Connectors for electronic equipment - Product requirements - Part 1: Generic specification
    EN 61076-4-113:2003 Connectors for electronic equipment - Printed board connectors - Part 4-113: Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications
    EN 60695-1-1:2000 Fire hazard testing - Part 1-1: Guidance for assessing the fire hazard of electrotechnical products - General guidelines
    EN 61753-111-7:2010 Fibre optic interconnecting devices and passive components - Performance standard - Part 111-7: Sealed closures for category A - Aerial
    CEI EN IEC 60352-6:2023 Solderless connections Part 6: Insulation piercing connections - General requirements, test methods and practical guidance
    CEN Guide 15:2012 Guidance document for the development of service standards
    17/30359001 DC : 0 BS ISO/IEC GUIDE 63 - GUIDE TO THE DEVELOPMENT AND INCLUSION OF ASPECTS OF SAFETY IN INTERNATIONAL STANDARDS FOR MEDICAL DEVICES
    03/311411 DC : 0 IEC 60695-1-11 ED.1 - FIRE HAZARD TESTING - PART 1-11: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - FIRE HAZARD ASSESSMENT
    BS EN 60695-1-1:2000 Fire hazard testing. Guidance for assessing fire hazard of electrotechnical products General guidelines
    BS EN 62075:2012 Audio/video, information and communication technology equipment. Environmentally conscious design
    11/30243718 DC : 0 BS EN 61121 ED 4.0 - TUMBLE DRYERS FOR HOUSEHOLD USE - METHODS FOR MEASURING THE PERFORMANCE
    NF EN 61869-1 : 2009 INSTRUMENT TRANSFORMERS - PART 1: GENERAL REQUIREMENTS
    BS EN 61753-111-7:2010 Fibre optic interconnecting devices and passive components performance standard Sealed closures for category A. Aerial
    09/30211744 DC : 0 BS EN 50181 - PLUG-IN TYPE BUSHINGS ABOVE 1 KV UP TO 52 KV AND FROM 250 A TO 2,50 KA FOR EQUIPMENT OTHER THAN LIQUID FILLED TRANSFORMERS
    BS EN 61753-101-3:2009 Fibre optic interconnecting devices and passive components performance standard Fibre management systems for category U. Uncontrolled environment
    BS EN 50386 : 2010 BUSHINGS UP TO 1 KV AND FROM 250 A TO 5 KA, FOR LIQUID FILLED TRANSFORMERS
    13/30240399 DC : 0 ISO/IEC GUIDE 51 - SAFETY ASPECTS - GUIDELINES FOR THEIR INCLUSION IN STANDARDS
    14/30313225 DC : 0 BS EN 61753-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARDS - PART 1: GENERAL AND GUIDANCE
    EN 61753-111-8:2010 Fibre optic interconnecting devices and passive components - Performance standard - Part 111-8: Sealed closures for category G - Ground
    BS EN 61076-3-118:2010 Connectors for electronic equipment. Product requirements Rectangular connectors. Detail specification for a 4 pole + PE power connector with push-pull coupling
    17/30352715 DC : 0 BS IEC 60086-6 ED 1.0 - PRIMARY BATTERIES - PART 6: GUIDANCE ON ENVIRONMENTAL ASPECTS
    ISO/IEC Guide 14:2018 Products and related services — Information for consumers
    PD CLC/TS 50594:2015 Tumble dryers for commercial use. Methods for measuring the performance
    15/30289940 DC : 0 BS EN 50180-1 - BUSHINGS ABOVE 1 KV UP TO 52 KV AND FROM 250 A TO 3,15 KA FOR LIQUID FILLED TRANSFORMERS - PART 1: GENERAL REQUIREMENTS FOR BUSHINGS
    11/30231694 DC : 0 BS EN 62040-4 - UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 4: ENVIRONMENTAL ASPECTS - REQUIREMENTS AND REPORTING
    BS EN 61076-4-113:2003 Connectors for electronic equipment Printed board connectors with assessed quality Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications
    CEI EN 61076-3-120 : 1ED 2017 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-120: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR REWIRABLE POWER CONNECTORS WITH SNAP LOCKING FOR RATED VOLTAGE OF 250 V D.C. AND RATED CURRENT OF 30 A
    I.S. EN 62146-1:2014 GRADING CAPACITORS FOR HIGH-VOLTAGE ALTERNATING CURRENT CIRCUIT-BREAKERS - PART 1: GENERAL
    ISO/IEC Guide 51:2014 Safety aspects Guidelines for their inclusion in standards
    BS EN 60137:2017 Insulated bushings for alternating voltages above 1000 V
    EN 60601-1-10:2008/A1:2015 MEDICAL ELECTRICAL EQUIPMENT - PART 1-10: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR THE DEVELOPMENT OF PHYSIOLOGIC CLOSED-LOOP CONTROLLERS (IEC 60601-1-10:2007)
    I.S. EN 61753-111-8:2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 111-8: SEALED CLOSURES FOR CATEGORY G - GROUND
    I.S. EN 61753-131-3:2011 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 131-3: SINGLE-MODE MECHANICAL FIBRE SPLICE FOR CATEGORY U - UNCONTROLLED ENVIRONMENT
    CEN/CLC Guide 32:2016 Guide for addressing climate change adaptation in standards
    IEC TR 62422:2007 Environmental characterization of solid insulating materials
    I.S. EN 61753-1:2007 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 1: GENERAL AND GUIDANCE FOR PERFORMANCE STANDARDS
    CSA C61869-1 : 2014 INSTRUMENT TRANSFORMERS - PART 1: GENERAL REQUIREMENTS
    CEI EN 61076-3-001 : 2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-001: RECTANGULAR CONNECTORS - BLANK DETAIL SPECIFICATION
    CISPR 16-2-3:2016 Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements
    CSA C22.2 No. 60601-1-10 : 2009 : R2014 MEDICAL ELECTRICAL EQUIPMENT - PART 1-10: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR THE DEVELOPMENT OF PHYSIOLOGIC CLOSED-LOOP CONTROLLERS
    NF EN 61076 4 113 : 2005 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRINTED BOARD CONNECTORS - PART 4-113: DETAIL SPECIFICATION FOR TWO-PART CONNECTORS HAVING 5 ROWS WITH A GRID OF 2,54 MM FOR PRINTED BOARDS AND BACKPLANES IN BUS APPLICATIONS
    CSA C22.2 No. 60601-1-10:2009 MEDICAL ELECTRICAL EQUIPMENT - PART 1-10: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR THE DEVELOPMENT OF PHYSIOLOGIC CLOSED-LOOP CONTROLLERS
    EN 62430:2009 Environmentally conscious design for electrical and electronic products
    IEC PAS 61076-3-126:2018 Connectors for electrical and electronic equipment - Product requirements - Part 3-126: Rectangular connectors - Detail specification for 5 pole power connector for industrial environments with push-pull locking
    IEC/IEEE 65700-19-03:2014 Bushings for DC application
    I.S. EN 50180:2010 BUSHINGS ABOVE 1 KV UP TO 52 KV AND FROM 250 A TO 3,15 KA FOR LIQUID FILLED TRANSFORMERS
    IEC 61121:2012 Tumble dryers for household use - Methods for measuring the performance
    IEC 60695-1-1:1999 Fire hazard testing - Part 1-1: Guidance for assessing the fire hazard of electrotechnical products - General guidelines
    IEC 60137:2017 RLV Insulated bushings for alternating voltages above 1000 V
    EN 60456:2016 Clothes washing machines for household use - Methods for measuring the performance
    DIN 820-12:2014-06 STANDARDIZATION - PART 12: GUIDELINES FOR THE INCLUSION OF SAFETY ASPECTS IN STANDARDS (ISO/IEC GUIDE 51:2014)
    BS 0-2:1997 A standard for standards Recommendations for committee procedures
    VDE 0471-1-1 : 2000 FIRE HAZARD TESTING - PART 1-1: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS; GENERAL GUIDELINES
    CEI EN IEC 62933-1:2022 Electrical Energy Storage (EES) systems Part 1: Vocabulary
    NF EN 61076 3 001 : 2009 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-001: RECTANGULAR CONNECTORS - BLANK DETAIL SPECIFICATION
    17/30351251 DC : 0 BS EN 62959 - ENVIRONMENTAL CONSCIOUS DESIGN (ECD) - PRINCIPLES, REQUIREMENTS AND GUIDANCE
    12/30239877 DC : 0 BS EN 60065 ED 8.0 - AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS
    I.S. EN 61076-3-118:2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-118: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR A 4 POLE + PE POWER CONNECTOR WITH PUSH-PULL COUPLING
    CLC/TS 50594:2015 Tumble dryers for commercial use - Methods for measuring the performance
    BS EN 60352-8:2011 Solderless connections Compression mount connections. General requirements, test methods and practical guidance
    CEI EN 60352-5 : 2013 SOLDERLESS CONNECTIONS - PART 5: PRESS-IN CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE
    CEI EN 61076-3-118 : 2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-118: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR A 4 POLE + PE POWER CONNECTOR WITH PUSH-PULL COUPLING
    IEC GUIDE 114:2005 Environmentally conscious design - Integrating environmental aspects into design and development of electrotechnical products
    UNE-EN 61121:2013 Tumble dryers for household use - Methods for measuring the performance
    17/30333280 DC : 0 BS ISO 17422 - PLASTICS - ENVIRONMENTAL ASPECTS - GENERAL GUIDELINES FOR THEIR INCLUSION IN STANDARDS
    12/30235047 DC : 0 BS EN 62146-1 ED.1 - GRADING CAPACITORS FOR HIGH-VOLTAGE ALTERNATING CURRENT CIRCUIT-BREAKERS
    BS EN 61753-131-3:2011 Fibre optic interconnecting devices and passive components. Performance standard Single-mode mechanical fibre splice for category U. Uncontrolled environment
    11/30249097 DC : 0 BS EN 60947-1:2007+A2 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES
    05/30133642 DC : DRAFT MAY 2005
    11/30246444 DC : 0 BS EN 62075 ED 2.0 - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - ENVIRONMENTALLY CONSCIOUS DESIGN
    UNE-EN 60137:2011 Insulated bushings for alternating voltages above 1 000 V
    08/30192173 DC : 0 BS EN 62542 ED1 - ENVIRONMENTAL STANDARDIZATION FOR ELECTRICAL AND ELECTRONIC PRODUCTS AND SYSTEMS - STANDARDIZATION OF ENVIRONMENTAL ASPECTS - GLOSSARY OF TERMS
    I.S. EN 61076-4-113:2003 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRINTED BOARD CONNECTORS - PART 4-113: DETAIL SPECIFICATION FOR TWO-PART CONNECTORS HAVING 5 ROWS WITH A GRID OF 2,54 MM FOR PRINTED BOARDS AND BACKPLANES IN BUS APPLICATIONS
    CEI EN 60352-8 : 2012 SOLDERLESS CONNECTIONS - PART 8: COMPRESSION MOUNT CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE
    09/30204447 DC : 0 BS EN 60352-5 - SOLDERLESS CONNECTIONS - PART 5: PRESS-IN CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE
    S.R. CLC/TR 62125:2008 ENVIRONMENTAL STATEMENT SPECIFIC TO TC 20 - ELECTRIC CABLES
    04/30125171 DC : DRAFT NOV 2004 IEC 61758-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - INTERFACE STANDARD FOR CLOSURES - PART 1: GENERAL AND GUIDANCE
    BS EN 60352-4:1995 Solderless connections Solderless non-accessible insulation displacement connections. General requirements, test methods and practical guidance
    15/30332712 DC : 0 BS EN 61076-3-123 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-123: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR HYBRID CONNECTORS FOR INDUSTRIAL ENVIRONMENTS, FOR POWER SUPPLY AND FIBRE OPTIC DATA TRANSMISSION, WITH PUSH-PULL LOCKING
    BS EN 61076-3-120:2016 Connectors for electronic equipment. Product requirements Rectangular connectors. Detail specification for rewirable power connectors with snap locking for rated voltage of 250 V d.c. and rated current of 30 A
    BS EN 60601-1-9 : 2008 MEDICAL ELECTRICAL EQUIPMENT - PART 1-9: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR ENVIRONMENTALLY CONSCIOUS DESIGN
    BS EN 60601-1-10 : 2008 MEDICAL ELECTRICAL EQUIPMENT - PART 1-10: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR THE DEVELOPMENT OF PHYSIOLOGIC CLOSED-LOOP CONTROLLERS
    IEC TS 62844:2016 Guidelines for quality and risk assessment for nano-enabled electrotechnical products
    IEC PAS 61076-2-114:2016 Connectors for electronic equipment - Product requirements - Part 2-114: Circular connectors - Detail specification for data and power connectors with M8 screw-locking
    BS EN 62146-1 : 2014 GRADING CAPACITORS FOR HIGH-VOLTAGE ALTERNATING CURRENT CIRCUIT-BREAKERS - PART 1: GENERAL (IEC 62146-1:2013)
    I.S. EN 61869-1:2009 INSTRUMENT TRANSFORMERS - PART 1: GENERAL REQUIREMENTS
    IEC PAS 63124:2017 Tumble dryers for commercial use - Methods for measuring the performance
    IEC 62430:2009 Environmentally conscious design for electrical and electronic products
    CEI EN 61753-111-8 : 2011 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 111-8: SEALED CLOSURES FOR CATEGORY G - GROUND
    BS EN 61753-1:2007 Fibre optic interconnecting devices and passive components performance standard General and guidance for performance standards
    CEI EN 61753-101-2 : 2007 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 101-2: FIBRE MANAGEMENT SYSTEMS FOR CATEGORY C - CONTROLLED ENVIRONMENT
    I.S. EN 61753-111-9:2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 111-9: SEALED CLOSURES FOR CATEGORY S - SUBTERRANEAN
    I.S. EN 62040-4:2013 UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 4: ENVIRONMENTAL ASPECTS - REQUIREMENTS AND REPORTING (IEC 62040-4:2013 (EQV))
    CEI EN 61758-1 : 2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - INTERFACE STANDARD FOR CLOSURES - PART 1: GENERAL AND GUIDANCE
    CSA ISO GUIDE 64 : 1998 GUIDE FOR THE INCLUSION OF ENVIRONMENTAL ASPECTS IN PRODUCT STANDARDS
    IEC PAS 62545:2008 Environmental information on Electrical and Electronic Equipment (EIEEE)
    IEC GUIDE 118:2017 Inclusion of energy efficiency aspects in electrotechnical publications
    IEC TR 62139:2004 Guidelines for the addition of environmental aspects in product standards specitif to TC 23
    NF EN 60352-4 : 2001 SOLDERLESS CONNECTIONS - PART 4: SOLDERLESS NON-ACCESSIBLE INSULATION DISPLACEMENT CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE
    IEC 61753-101-2:2006 Fibre optic interconnecting devices and passive components performance standard - Part 101-2: Fibre management systems for Category C - Controlled environment
    IEC 61076-4-113:2002 Connectors for electronic equipment - Printed board connectors - Part 4-113: Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications
    UNE-EN 61869-1:2010 Instrument transformers -- Part 1: General requirements
    EN 60352-4:1994/A1:2000 SOLDERLESS CONNECTIONS - PART 4: SOLDERLESS NON-ACCESSIBLE INSULATION DISPLACEMENT CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE
    EN 60601-1-9:2008/A1:2013 MEDICAL ELECTRICAL EQUIPMENT - PART 1-9: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR ENVIRONMENTALLY CONSCIOUS DESIGN (IEC 60601-1-9:2007/A1:2013)
    EN 50180:2010 Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers – Part 1: General requirements for bushings
    IEC GUIDE 111:2004 Electrical high-voltage equipment in high-voltage substations - Common recommendations for product standards
    UNE-EN 50180-1:2015 Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers - Part 1: General requirements for bushings
    CSA C22.2 No. 60601-1-9 : 2015 MEDICAL ELECTRICAL EQUIPMENT - PART 1-9: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR ENVIRONMENTALLY CONSCIOUS DESIGN
    10/30216488 DC : 0 BS EN 50386 - BUSHINGS UP TO 1 KV AND FROM 250 A TO 5 KA, FOR LIQUID FILLED TRANSFORMERS
    PD CLC/TR 62125:2008 Environmental statement specific to TC 20. Electric cables
    BS EN 60352-5:2012 Solderless connections Press-in connections. General requirements, test methods and practical guidance
    BS ISO 10987:2012 Earth-moving machinery. Sustainability. Terminology, sustainability factors and reporting
    14/30311585 DC : 0 BS EN 61076-3-120 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-120: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR REWIRABLE POWER CONNECTOR WITH SNAP LOCKING FOR 250 V D.C. AND RATED CURRENT OF 30A
    PREN 50181 : DRAFT 2009 PLUG-IN TYPE BUSHINGS ABOVE 1 KV UP TO 52 KV AND FROM 250 A TO 2,50 KA FOR EQUIPMENT OTHER THAN LIQUID FILLED TRANSFORMERS
    09/30214442 DC : 0 BS EN 50180 - BUSHINGS ABOVE 1 KV UP TO 52 KV AND FROM 250 A TO 3,15 KA FOR LIQUID FILLED TRANSFORMERS
    17/30356253 DC : 0 BS EN 62933-1 - ELECTRICAL ENERGY STORAGE (EES) SYSTEMS - PART 1: TERMINOLOGY
    08/30181397 DC : DRAFT APR 2008 BS EN 60456 - CLOTHES WASHING MACHINES FOR HOUSEHOLD USE - METHODS FOR MEASURING THE PERFORMANCE
    06/30147232 DC : DRAFT OCT 2006 IEC 60601-1-10 - MEDICAL ELECTRICAL EQUIPMENT - PART 1-10: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD - REQUIREMENTS FOR THE DEVELOPMENT OF PHYSIOLOGIC CLOSED-LOOP CONTROLLERS
    04/30116293 DC : DRAFT JUL 2004 IEC 61753-1-2 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - INTERFACE STANDARD FOR FIBRE MANAGEMENT SYSTEMS - PART 1: PERFORMANCE STANDARD FOR FIBRE MANAGEMENT SYSTEMS FOR CONTROLLED AND UNCONTROLLED ENVIRONMENT
    CEI EN 61753-1 : 2009 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 1: GENERAL AND GUIDANCE FOR PERFORMANCE STANDARDS
    I.S. EN 61753-101-3:2008 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 101-3: FIBRE MANAGEMENT SYSTEMS FOR CATEGORY U - UNCONTROLLED ENVIRONMENT
    BS EN 62040-4:2013 Uninterruptible power systems (UPS) Environmental aspects. Requirements and reporting
    CEI CLC/TR 62125 : 2011 ENVIRONMENTAL STATEMENT SPECIFIC TO TC 20 - ELECTRIC CABLES
    06/30154129 DC : DRAFT AUG 2006 EN 62430 - ENVIRONMENTAL CONSCIOUS DESIGN FOR ELECTRICAL AND ELECTRONIC PRODUCTS AND SYSTEMS
    07/30160635 DC : 0 BS EN 60352-8 - SOLDERLESS CONNECTIONS - PART 8: COMPRESSION MOUNT CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE
    EN IEC 61076-3-119:2018 Connectors for electrical and electronic equipment - Product requirements - Part 3-119: Rectangular connectors - Detail specification for shielded and unshielded, free and fixed 10-way connectors with push-pull coupling for industrial environments for data transmission with frequencies up to 100 MHz
    BS EN 62542:2013 Environmental standardization for electrical and electronic products and systems. Glossary of terms
    08/30179153 DC : DRAFT MAR 2008 BS EN 61076-3-118 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-118: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR A 4 POLES + PE POWER CONNECTOR WITH PUSH-PULL COUPLING
    I.S. EN 62542:2013 ENVIRONMENTAL STANDARDIZATION FOR ELECTRICAL AND ELECTRONIC PRODUCTS AND SYSTEMS - GLOSSARY OF TERMS (IEC 62542:2013 (EQV))
    16/30318517 DC : 0 BS EN 60137 ED. 7.0 - INSULATED BUSHINGS FOR ALTERNATING VOLTAGES ABOVE 1000 V
    DD IEC/PAS 62545:2008 Environmental information on electrical and electronic equipment (EIEEE)
    EN 60137:2017 Insulated bushings for alternating voltages above 1 000 V
    IEC TR 61592:2003 Household electrical appliances - Guidelines for consumer panel testing
    CEI EN 61076-1 : 2007 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 1: GENERIC SPECIFICATION
    IEC TR 62392:2006 Suitability of typical electrical insulating material (EIM) for polymer recycling
    I.S. EN IEC 62933-1:2018 ELECTRICAL ENERGY STORAGE (EES) SYSTEMS - PART 1: VOCABULARY
    I.S. EN 60695-1-1:2000 FIRE HAZARD TESTING - PART 1-1: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - GENERAL GUIDELINES
    I.S. EN 61076-1:2006&A1:2019 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 1: GENERIC SPECIFICATION
    PREN 50180 : DRAFT 2009 BUSHINGS ABOVE 1 KV UP TO 52 KV AND FROM 250 A TO 3,15 KA FOR LIQUID FILLED TRANSFORMERS
    BS EN 61121:2013 Tumble dryers for household use. Methods for measuring the performance
    CEI EN 61753-111-7 : 2011 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 111-7: SEALED CLOSURES FOR CATEGORY A - AERIA
    CEI EN 62430 : 2011 ENVIRONMENTALLY CONSCIOUS DESIGN FOR ELECTRICAL AND ELECTRONIC PRODUCTS
    IEC 60137 REDLINE : 7ED 2017 INSULATED BUSHINGS FOR ALTERNATING VOLTAGES ABOVE 1000 V
    ISO/IEC Guide 41:2003 Packaging Recommendations for addressing consumer needs
    I.S. EN 62075:2012 AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - ENVIRONMENTALLY CONSCIOUS DESIGN (IEC 62075:2012 (EQV))
    I.S. EN 60601-1-9:2008 MEDICAL ELECTRICAL EQUIPMENT - PART 1-9: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR ENVIRONMENTALLY CONSCIOUS DESIGN (IEC 60601-1-9:2007 (EQV))
    I.S. EN 50386:2010 BUSHINGS UP TO 1 KV AND FROM 250 A TO 5 KA, FOR LIQUID FILLED TRANSFORMERS
    IEC 61753-1:2007 Fibre optic interconnecting devices and passive components performance standard - Part 1: General and guidance for performance standards
    I.S. EN 61076-3-001:2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-001: RECTANGULAR CONNECTORS - BLANK DETAIL SPECIFICATION
    EN 60352-5:2012/AC:2014 SOLDERLESS CONNECTIONS - PART 5: PRESS-IN CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE (IEC 60352-5:2012)
    12/30228018 DC : 0 BS EN 61557-15 - ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 15: FUNCTIONAL SAFETY REQUIREMENTS FOR INSULATION MONITORING DEVICES AND FOR EQUIPMENT FOR INSULATION FAULT LOCATION IN IT SYSTEMS
    IEC 62542:2013 Environmental standardization for electrical and electronic products and systems - Glossary of terms
    UNE-EN 60456:2016 Clothes washing machines for household use - Methods for measuring the performance
    IEC 61557-15:2014 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 15: Functional safety requirements for insulation monitoring devices in IT systems and equipment for insulation fault location in IT systems
    IEC 62040-4:2013 Uninterruptible power systems (UPS) - Part 4: Environmental aspects - Requirements and reporting
    IEC 61753-111-9:2009 Fibre optic interconnecting devices and passive components performance standard - Part 111-9: Sealed closures for category S - Subterranean
    IEC 60352-8:2011 Solderless connections - Part 8: Compression mount connections - General requirements, test methods and practical guidance
    IEC 61753-111-8:2009 Fibre optic interconnecting devices and passive components performance standard - Part 111-8: Sealed closures for category G - Ground
    IEC 62075:2012 Audio/video, information and communication technology equipment - Environmentally conscious design
    IEC 60601-1-9:2007+AMD1:2013 CSV Medical electrical equipment - Part 1-9: General requirements forbasic safety and essential performance - Collateral Standard: Requirements for environmentally conscious design
    IEC 61076-3-118:2010 Connectors for electronic equipment - Product requirements - Part 3-118: Rectangular connectors - Detail specification for a 4 pole plus PE power connector with push-pull coupling
    IEC 60601-1-10:2007+AMD1:2013 CSV Medical electrical equipment - Part 1-10: General requirements forbasic safety and essential performance - Collateral Standard: Requirements for the development of physiologic closed-loopcontrollers
    IEC 62146-1:2013+AMD1:2016 CSV Grading capacitors for high-voltage alternating current circuit-breakers - Part 1: General
    IEC 61753-131-3:2010 Fibre optic interconnecting devices and passive components - Performance standard - Part 131-3: Single-mode mechanical fibre splice for category U - Uncontrolled environment
    IEC 61753-111-7:2009 Fibre optic interconnecting devices and passive components performance standard - Part 111-7: Sealed closures for category A - Aerial
    IEC 61076-3-120:2016 Connectors for electronic equipment - Product requirements - Part 3-120: Rectangular connectors - Detail specification for rewirable power connectors with snap locking for rated voltage of 250 V d.c. and rated current of 30 A
    IEC 61758-1:2008 Fibre optic interconnecting devices and passive components - Interface standard for closures - Part 1: General and guidance
    IEC 61076-1:2006 Connectors for electronic equipment - Product requirements - Part 1: Generic specification
    IEC 60352-5:2012 Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance
    BS EN 50181:2010 Plug-in type bushings above 1 kV up to 52 kV and from 250 A to 2,50 kA for equipment other than liquid filled transformers
    UNE-EN 62075:2013 Audio/video, information and communication technology equipment - Environmentally conscious design
    04/30116255 DC : DRAFT JULY 2004 IEC 60695-1-12 - FIRE HAZARD TESTING - PART 1-12: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - FIRE SAFETY ENGINEERING
    17/30340059 DC : 0 BS EN 61076-3-119 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-119: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR UNSHIELDED, FREE AND FIXED 10 WAY CONNECTORS WITH PUSH-PULL COUPLING FOR INDUSTRIAL ENVIRONMENTS WITH FREQUENCIES UP TO 100 MHZ
    CEI EN 61753-111-9 : 2011 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 111-9: SEALED CLOSURES FOR CATEGORY S - SUBTERRANEAN
    PD IEC/PAS 61076-2-114:2016 Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for data and power connectors with M8 screw-locking
    BS EN 61753-101-2:2006 Fibre optic interconnecting devices and passive components performance standard Fibre management systems for category C. Controlled environment
    13/30280190 DC : 0 BS EN 50598-3 - ECODESIGN FOR POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS & THEIR DRIVEN APPLICATIONS - PART 3: QUANTITATIVE ECO DESIGN APPROACH THROUGH LIFE CYCLE ASSESSMENT INCLUDING PRODUCT CATEGORY RULES AND THE CONTENT OF ENVIRONMENTAL DECLARATIONS
    I.S. EN 50180-1:2015 BUSHINGS ABOVE 1 KV UP TO 52 KV AND FROM 250 A TO 3,15 KA FOR LIQUID FILLED TRANSFORMERS - PART 1: GENERAL REQUIREMENTS FOR BUSHINGS
    07/30156704 DC : DRAFT DEC 2007 BS ISO GUIDE 64 - GUIDE FOR ADDRESSING ENVIRONMENTAL ISSUES IN PRODUCT STANDARDS
    05/30135949 DC : DRAFT JUL 2005 IEC 60695-1-30 ED 2 - FIRE HAZARD TESTING - PART 1-30: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - USE OF PRESELECTION TESTING PROCEDURES
    01/205488 DC : DRAFT AUG 2001 IEC 61318 ED.2 - LIVE WORKING - QUALITY ASSURANCE PLANS APPLICABLE TO TOOLS, DEVICES AND EQUIPMENT
    BS EN 61753-111-9:2010 Fibre optic interconnecting devices and passive components performance standard Sealed closures for category S. Subterranean
    BS EN 61753-111-8:2010 Fibre optic interconnecting devices and passive components performance standard Sealed closures for category G. Ground
    PD ISO/IEC GUIDE 51:2014 Safety aspects. Guidelines for their inclusion in standards
    IEC 60137:2017 Insulated bushings for alternating voltages above 1000 V
    ISO Guide 64:2008 Guide for addressing environmental issues in product standards
    BS EN 61076-3-001:2000 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Rectangular connectors Blank detail specification
    CEI EN 62075 : 2013 AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - ENVIRONMENTALLY CONSCIOUS DESIGN
    DIN EN 60695-1-1 : 2000 FIRE HAZARD TESTING - PART 1-1: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS; GENERAL GUIDELINES
    CEI EN 61869-1 : 2010 INSTRUMENT TRANSFORMERS - PART 1: GENERAL REQUIREMENTS
    CSA C22.2 No. 60601-1-10 : 2009 : INC : AMD 1 : 2014 : R201400 MEDICAL ELECTRICAL EQUIPMENT - PART 1-10: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR THE DEVELOPMENT OF PHYSIOLOGIC CLOSED-LOOP CONTROLLERS
    I.S. EN 61758-1:2008 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - INTERFACE STANDARD FOR CLOSURES - PART 1: GENERAL AND GUIDANCE
    I.S. EN 61753-101-2:2006 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 101-2: FIBRE MANAGEMENT SYSTEMS FOR CATEGORY C - CONTROLLED ENVIRONMENT
    I.S. EN IEC 61076-3-119:2018 CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-119: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR SHIELDED AND UNSHIELDED, FREE AND FIXED 10-WAY CONNECTORS WITH PUSH-PULL COUPLING FOR INDUSTRIAL ENVIRONMENTS FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 100 MHZ
    I.S. EN 60137:2017 INSULATED BUSHINGS FOR ALTERNATING VOLTAGES ABOVE 1000 V
    I.S. EN 61557-15:2014 ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 15: FUNCTIONAL SAFETY REQUIREMENTS FOR INSULATION MONITORING DEVICES IN IT SYSTEMS AND EQUIPMENT FOR INSULATION FAULT LOCATION IN IT SYSTEMS
    I.S. EN IEC/IEEE 65700:2018 BUSHINGS FOR DC APPLICATION
    CEI EN 60137 : 2009 INSULATED BUSHINGS FOR ALTERNATING VOLTAGES ABOVE 1000 V
    S.R. CLC/TS 50594:2015 TUMBLE DRYERS FOR COMMERCIAL USE - METHODS FOR MEASURING THE PERFORMANCE
    UTE TR 62125 : 2008 ENVIRONMENTAL STATEMENT SPECIFIC TO CENELEC TC 20 - ELECTRIC CABLES
    ISO 17422:2002 Plastics Environmental aspects General guidelines for their inclusion in standards
    BS EN 60456:2016 Clothes washing machines for household use. Methods for measuring the performance
    ISO 10987:2012 Earth-moving machinery — Sustainability — Terminology, sustainability factors and reporting
    IEC TR 62125:2007 Environmental statement specific to IEC TC 20 - Electric cables
    IEC 61869-1:2007 Instrument transformers - Part 1: General requirements
    IEC 61753-101-3:2006 Fibre optic interconnecting devices and passive components performance standard - Part 101-3: Fibre management systems for Category U - Uncontrolled environment
    IEC 61076-3-001:2008 Connectors for electronic equipment - Product requirements - Part 3-001: Rectangular connectors - Blank detail specification
    03/314451 DC : DRAFT SEP 2003 IEC 62392 TR ED.1 - SUITABILITY OF TYPICAL ELECTRICAL INSULATING MATERIAL FOR POLYMER RECYCLING
    BS EN 61557-15:2014 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measures Functional safety requirements for insulation monitoring devices in IT systems and equipment for insulation fault location in IT systems
    EN 61121:2013 Tumble dryers for household use - Methods for measuring the performance
    EN 62075:2012/AC:2013 AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - ENVIRONMENTALLY CONSCIOUS DESIGN (IEC 62075:2012)
    EN 61076-3-001:2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-001: RECTANGULAR CONNECTORS - BLANK DETAIL SPECIFICATION
    EN 62146-1:2014/A1:2016 GRADING CAPACITORS FOR HIGH-VOLTAGE ALTERNATING CURRENT CIRCUIT-BREAKERS - PART 1: GENERAL (IEC 62146-1:2013/A1:2016)
    EN 61869-1:2009 Instrument transformers - Part 1: General requirements
    EN 50386:2010/A1:2013 BUSHINGS UP TO 1 KV AND FROM 250 A TO 5 KA, FOR LIQUID FILLED TRANSFORMERS
    EN 50180-1:2015 Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers - Part 1: General requirements for bushings
    EN 61753-101-2 : 2006 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 101-2: FIBRE MANAGEMENT SYSTEMS FOR CATEGORY C - CONTROLLED ENVIRONMENT
    EN 61753-1:2007 Fibre optic interconnecting devices and passive components performance standard - Part 1: General and guidance for performance standards
    CLC/TR 62125:2008 Environmental statement specific to TC 20 - Electric cables
    EN 60352-8:2011 Solderless connections - Part 8: Compression mount connections - General requirements, test methods and practical guidance
    EN 50181:2010 Plug-in type bushings above 1 kV up to 52 kV and from 250 A to 2,50 kA for equipment other than liquid filled transformers
    EN 61076-3-120 : 2016 Connectors for electronic equipment - Product requirements - Part 3-120: Rectangular connectors - Detail specification for rewirable power connectors with snap locking for rated voltage of 250 V d.c. and rated current of 30 A
    EN 61076-3-118 : 2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-118: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR A 4 POLE + PE POWER CONNECTOR WITH PUSH-PULL COUPLING

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 15270:2008 Plastics — Guidelines for the recovery and recycling of plastics waste
    IEC 62075:2012 Audio/video, information and communication technology equipment - Environmentally conscious design
    IEC 62430:2009 Environmentally conscious design for electrical and electronic products
    ISO 14001:2015 Environmental management systems — Requirements with guidance for use
    ISO/IEC Guide 2:2004 Standardization and related activities General vocabulary
    ISO Guide 64:2008 Guide for addressing environmental issues in product standards
    ISO 14040:2006 Environmental management Life cycle assessment Principles and framework
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective