IEC 61000-4-8 : 2.0
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-8: TESTING AND MEASUREMENT TECHNIQUES - POWER FREQUENCY MAGNETIC FIELD IMMUNITY TEST |
IEC TR 61000-2-6:1995
|
Electromagnetic compatibility (EMC) - Part 2: Environment - Section 6: Assessment of the emission levels in the power supply of industrial plants as regards low-frequency conducted disturbances |
IEC 61000-4-10 : 2.0
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-10: TESTING AND MEASUREMENT TECHNIQUES - DAMPED OSCILLATORY MAGNETIC FIELD IMMUNITY TEST |
ISO/IEC 14443-1:2016
|
Identification cards Contactless integrated circuit cards Proximity cards Part 1: Physical characteristics |
IEC 61000-4-19:2014
|
Electromagnetic compatibility (EMC) - Part 4-19: Testing and measurement techniques - Test for immunity to conducted, differential mode disturbances and signalling in the frequency range 2 kHz to 150 kHz at a.c. power ports |
IEC TR 61000-2-7:1998
|
Electromagnetic compatibility (EMC) - Part 2: Environment - Section 7: Low frequency magnetic fields in various environments |
EN 50160 : 2010 AMD 1 2015
|
VOLTAGE CHARACTERISTICS OF ELECTRICITY SUPPLIED BY PUBLIC ELECTRICITY NETWORKS |
IEC GUIDE 107:2014
|
Electromagnetic compatibility - Guide to the drafting of electromagnetic compatibility publications |
IEC 61000-2-10:1998
|
Electromagnetic compatibility (EMC) - Part 2-10: Environment - Description of HEMP environment - Conducted disturbance |
ISO/IEC 15693-2:2006
|
Identification cards Contactless integrated circuit cards Vicinity cards Part 2: Air interface and initialization |
IEC 61000-2-4:2002
|
Electromagnetic compatibility (EMC) - Part 2-4: Environment - Compatibility levels in industrial plants for low-frequency conducted disturbances |
IEC TR 61000-1-1:1992
|
Electromagnetic compatibility (EMC) - Part 1: General - Section 1: Application and interpretation of fundamental definitions and terms |
IEC 61000-4-4 : 3.0EN+(REDLINE+VERSION)
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST |
IEC 61000-2-12:2003
|
Electromagnetic compatibility (EMC) - Part 2-12: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public medium-voltage power supply systems |
IEC TS 62578:2015
|
Power electronics systems and equipment - Operation conditions and characteristics of active infeed converter (AIC) applications including design recommendations for their emission values below 150 kHz |
IEC 61000-2-11:1999
|
Electromagnetic compatibility (EMC) - Part 2-11: Environment - Classification of HEMP environments |
EN 301 091 : 1.1.1
|
ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM) - ROAD TRANSPORT AND TRAFFIC TELEMATICS (RTTT) - TECHNICAL CHARACTERISTICS AND TEST METHODS FOR RADAR EQUIPMENT OPERATING IN THE 76 GHZ TO 77 GHZ BAND |
IEC 60050-601:1985
|
International Electrotechnical Vocabulary (IEV) - Part 601: Generation, transmission and distribution of electricity - General |
ISO/IEC 18000-6:2013
|
Information technology Radio frequency identification for item management Part 6: Parameters for air interface communications at 860 MHz to 960 MHz General |
IEC 61000-4-11:2004+AMD1:2017 CSV
|
Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests |
IEC TR 61000-4-1:2016
|
Electromagnetic compatibility (EMC) - Part 4-1: Testing and measurement techniques - Overview of IEC 61000-4 series |
IEC 61000-6-1 : 3.0
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-1: GENERIC STANDARDS - IMMUNITY STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS |
IEC 61000-3-12:2011
|
Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and ≤ 75 A per phase |
ISO/IEC 15693-3:2009
|
Identification cards Contactless integrated circuit cards Vicinity cards Part 3: Anticollision and transmission protocol |
IEC 61000-4-12 : 3.0
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-12: TESTING AND MEASUREMENT TECHNIQUES - RING WAVE IMMUNITY TEST |
IEC 61000-4-39:2017
|
Electromagnetic compatibility (EMC) - Part 4-39: Testing and measurement techniques - Radiated fields in close proximity - Immunity test |
EN 50065-2-2:2003/A1:2005/corrigendum Oct. 2006
|
SIGNALING ON LOW-VOLTAGE ELECTRICAL INSTALLATIONS IN THE FREQUENCY RANGE 3 KHZ TO 148,5 KHZ - PART 2-2: IMMUNITY REQUIREMENTS FOR MAINS COMMUNICATIONS EQUIPMENT AND SYSTEMS OPERATING IN THE RANGE OF FREQUENCIES 95 KHZ TO 148,5 KHZ AND INTENDED FOR USE IN INDUSTRIAL ENVIRONMENTS |
ISO/IEC 18000-7:2014
|
Information technology Radio frequency identification for item management Part 7: Parameters for active air interface communications at 433 MHz |
IEC TR 61000-2-3:1992
|
Electromagnetic compatibility (EMC) - Part 2: Environment - Section 3: Description of the environment - Radiated and non-network-frequency-related conducted phenomena |
ISO/IEC 14443-4:2016
|
Identification cards Contactless integrated circuit cards Proximity cards Part 4: Transmission protocol |
CFR 47(PTS0-19) : OCT 2017
|
TELECOMMUNICATION - FEDERAL COMMUNICATIONS COMMISSION |
EN 50065-2-1 : 2003 AMD 1 2005
|
SIGNALLING ON LOW-VOLTAGE ELECTRICAL INSTALLATIONS IN THE FREQUENCY RANGE 3 KHZ TO 148,5 KHZ - PART 2-1: IMMUNITY REQUIREMENTS FOR MAINS COMMUNICATIONS EQUIPMENT AND SYSTEMS OPERATING IN THE RANGE OF FREQUENCIES 95 KHZ TO 148,5 KHZ AND INTENDED FOR USE IN RESIDENTIAL, COMMERCIAL AND LIGHT INDUSTRIAL ENVIRONMENTS |
IEC 60364-1:2005
|
Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions |
IEC 61000-4-6 : 4.0
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS |
CISPR TR 16-4-1:2009
|
Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-1: Uncertainties, statistics and limit modelling - Uncertainties in standardized EMC tests |
IEC 61000-4-9 : 2.0
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-9: TESTING AND MEASUREMENT TECHNIQUES - IMPULSE MAGNETIC FIELD IMMUNITY TEST |
IEC 61000-4-28:1999+AMD1:2001+AMD2:2009 CSV
|
Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques - Variation of power frequency, immunity test for equipment with input current not exceeding 16 A per phase |
IEC 61000-4-27:2000+AMD1:2009 CSV
|
Electromagnetic compatibility (EMC) - Part 4-27: Testing and measurement techniques - Unbalance, immunity test for equipment with input current not exceeding 16 A per phase |
IEC 62040-3:2011
|
Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements |
IEC 60050-603:1986
|
International Electrotechnical Vocabulary (IEV) - Part 603: Generation, transmission and distribution of electricity - Power systems planning and management |
IEC TR 61000-1-4:2005
|
Electromagnetic compatibility (EMC) - Part 1-4: General - Historical rationale for the limitation of power-frequency conducted harmonic current emissions from equipment, in the frequency range up to 2 kHz |
IEC TR 61000-2-14:2006
|
Electromagnetic compatibility (EMC) - Part 2-14: Environment - Overvoltages on public electricity distribution networks |
IEC 60364-4-44:2007+AMD1:2015 CSV
|
Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances |
IEC 61000-4-20:2010
|
Electromagnetic compatibility (EMC) - Part 4-20: Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides |
ISO/IEC 18000-2:2009
|
Information technology — Radio frequency identification for item management — Part 2: Parameters for air interface communications below 135 kHz |
ISO/IEC 18000-4:2015
|
Information technology Radio frequency identification for item management Part 4: Parameters for air interface communications at 2,45 GHz |
IEC 61000-4-2:2008
|
Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV
|
Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
IEC TS 61000-3-4:1998
|
Electromagnetic compatibility (EMC) - Part 3-4: Limits - Limitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 16 A |
IEC TR 61000-2-1:1990
|
Electromagnetic compatibility (EMC) - Part 2: Environment - Section 1: Description of the environment - Electromagnetic environment for low-frequency conducted disturbances and signalling in public power supply systems |
IEC 61000-2-2:2002+AMD1:2017 CSV
|
Electromagnetic compatibility (EMC) - Part 2-2: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems |
IEC 60533:2015
|
Electrical and electronic installations in ships - Electromagnetic compatibility (EMC) - Ships with a metallic hull |
IEC 62271-1:2017
|
High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear |
IEC 60050-121:1998
|
International Electrotechnical Vocabulary (IEV) - Part 121: Electromagnetism |
IEC 61000-4-14:1999+AMD1:2001+AMD2:2009 CSV
|
Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase |
IEC 61000-2-9:1996
|
Electromagnetic compatibility (EMC) - Part 2: Environment - Section 9: Description of HEMP environment - Radiated disturbance. Basic EMC publication |
CISPR TR 16-4-4:2007
|
Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-4: Uncertainties, statistics and limit modelling - Statistics of complaints and a model for the calculation of limits for the protection of radio services |
CISPR 11:2015 RLV
|
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement |
EN 50065-1:2011
|
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 1: General requirements, frequency bands and electromagnetic disturbances |
EN 50065-2-3 : 2003 AMD 1 2005
|
SIGNALLING ON LOW-VOLTAGE ELECTRICAL INSTALLATIONS IN THE FREQUENCY RANGE 3 KHZ TO 148.5 KHZ - PART 2-3: IMMUNITY REQUIREMENTS FOR MAINS COMMUNICATIONS EQUIPMENT AND SYSTEMS OPERATING IN THE RANGE OF FREQUENCIES 3 KHZ TO 95 KHZ AND INTENDED FOR USE BY ELECTRICITY SUPPLIERS AND DISTRIBUTORS |
IEC 60118-4:2014+AMD1:2017 CSV
|
Electroacoustics - Hearing aids - Part 4: Induction-loop systems for hearing aid purposes - System performance requirements |
ISO/IEC 14443-2:2016
|
Identification cards Contactless integrated circuit cards Proximity cards Part 2: Radio frequency power and signal interface |
IEC 60050-705:1995
|
International Electrotechnical Vocabulary (IEV) - Part 705: Radio wave propagation |
EN 300 330 : 1.2.2
|
SHORT RANGE DEVICES (SRD); RADIO EQUIPMENT IN THE FREQUENCY RANGE 9 KHZ TO 25 MHZ AND INDUCTIVE LOOP SYSTEMS IN THE FREQUENCY RANGE 9 KHZ TO 30 MHZ; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.2 OF DIRECTIVE 2014/53/EU |
ISO/IEC 14443-3:2016
|
Identification cards Contactless integrated circuit cards Proximity cards Part 3: Initialization and anticollision |
IEC TR 61000-2-8:2002
|
Electromagnetic compatibility (EMC) - Part 2-8: Environment - Voltage dips and short interruptions on public electric power supply systems with statistical measurement results |
IEC 61000-6-2 : 3.0:2016
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY STANDARD FOR INDUSTRIAL ENVIRONMENTS |
IEC 61000-2-13:2005
|
Electromagnetic compatibility (EMC) - Part 2-13: Environment - High-power electromagnetic (HPEM) environments - Radiated and conducted |
CFR 47(PTS80-END) : OCT 2017
|
TELECOMMUNICATION - FEDERAL COMMUNICATIONS COMMISSION |
IEC 61000-4-18:2006+AMD1:2010 CSV
|
Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test |
IEC 61000-4-21:2011
|
Electromagnetic compatibility (EMC) - Part 4-21: Testing and measurement techniques - Reverberation chamber test methods |
IEC 61000-4-13:2002+AMD1:2009+AMD2:2015 CSV
|
Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics includingmains signalling at a.c. power port, low frequency immunity tests |
IEC 61000-4-34:2005+AMD1:2009 CSV
|
Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase |
ISO/IEC 15693-1:2010
|
Identification cards Contactless integrated circuit cards Vicinity cards Part 1: Physical characteristics |
ISO/IEC 18000-3:2010
|
Information technology — Radio frequency identification for item management — Part 3: Parameters for air interface communications at 13,56 MHz |
IEC 60050-725:1994
|
International Electrotechnical Vocabulary (IEV) - Part 725: Space radiocommunications |
IEC 61000-3-2 : 4.0
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-2: LIMITS - LIMITS FOR HARMONIC CURRENT EMISSIONS (EQUIPMENT INPUT CURRENT <= 16 A PER PHASE) |
IEC 61000-4-16 : 2.0
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-16: TESTING AND MEASUREMENT TECHNIQUES - TEST FOR IMMUNITY TO CONDUCTED, COMMON MODE DISTURBANCES IN THE FREQUENCY RANGE 0 HZ TO 150 KHZ |