IEC 61025:2006
|
Fault tree analysis (FTA) |
IEC 60480:2004
|
Guidelines for the checking and treatment of sulfur hexafluoride (SF6) taken from electrical equipment and specification for its re-use |
IEC 62271-100:2008+AMD1:2012+AMD2:2017 CSV
|
High-voltage switchgear and controlgear - Part 100: Alternating-current circuit-breakers |
IEEE C37.14-2015 REDLINE
|
IEEE Standard for DC (3200 V and below) Power Circuit Breakers Used in Enclosures |
NFPA 921 : 2017
|
GUIDE FOR FIRE AND EXPLOSION INVESTIGATIONS |
IEC 62271-200:2011
|
High-voltage switchgear and controlgear - Part 200: AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV |
IEEE C37.013-1997
|
IEEE Standard for AC High-Voltage Generator Circuit Breakers Rated on a Symmetrical Current Basis |
IEC 62271-110:2017
|
High-voltage switchgear and controlgear - Part 110: Inductive load switching |
IEEE C37.13-2008 REDLINE
|
IEEE Standard for Low-Voltage AC Power Circuit Breakers Used in Enclosures |
IEC 62271-202:2014
|
High-voltage switchgear and controlgear - Part 202: High-voltage/ low-voltage prefabricated substation |
IEEE C37.20.6-2015
|
IEEE Standard for 4.76 kV to 38 kV Rated Ground and Test Devices Used in Enclosures |
IEEE C37.100.1-2007
|
IEEE Standard of Common Requirements for High Voltage Power Switchgear Rated Above 1000 V |
IEC 62271-201:2014
|
High-voltage switchgear and controlgear - Part 201: AC solid-insulation enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV |
IEC 60812:2006
|
Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA) |
IEC 60422:2013
|
Mineral insulating oils in electrical equipment - Supervision and maintenance guidance |
IEC 60050-441:1984
|
International Electrotechnical Vocabulary (IEV) - Part 441: Switchgear, controlgear and fuses |
IEEE C37.012-2005
|
IEEE Application Guide for Capacitance Current Switching for AC High-Voltage Circuit Breakers |
IEEE C37.20.2-2015
|
IEEE Standard for Metal-Clad Switchgear |
IEC TR 62271-300:2006
|
High-voltage switchgear and controlgear - Part 300: Seismic qualification of alternating current circuit-breakers |
IEC 60056:1987
|
High-voltage alternating-current circuit-breakers |
IEEE 493 : 2007
|
DESIGN OF RELIABLE INDUSTRIAL AND COMMERCIAL POWER SYSTEMS |
IEC 60376:2005
|
Specification of technical grade sulfur hexafluoride (SF6) for use in electrical equipment |
NFPA 907M : 1988
|
MANUAL FOR THE DETERMINATION OF ELECTRICAL FIRE CAUSES |
IEEE C37.59-2007
|
IEEE Standard Requirements for Conversion of Power Switchgear Equipment |
IEC TS 62271-304:2008
|
High-voltage switchgear and controlgear - Part 304: Design classes for indoor enclosed switchgear and controlgear for rated voltages above 1 kV up to and includuing 52 kV to be used in severe climatic conditions |
IEC 62271-3:2015
|
High-voltage switchgear and controlgear - Part 3: Digital interfaces based on IEC 61850 |
ANSI C37.6 : 1971
|
SCHEDULE OF PREFERRED RATINGS FOR AC HIGH-VOLTAGE CIRCUIT BREAKERS RATED ON A TOTAL CURRENT BASIS |
IEC 61958:2000
|
High-voltage prefabricated switchgear and controlgear assemblies - Voltage presence indicating systems |
IEC TR 62063:1999
|
High-voltage switchgear and controlgear - The use of electronic and associated technologies in auxiliary equipment of switchgear and controlgear |
IEEE C37.11-1997
|
IEEE Standard Requirements for Electrical Control for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis |
IEEE C37.010-1999
|
IEEE Application Guide for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis |
IEEE C37.13-2015 REDLINE
|
IEEE Standard for Low-Voltage AC Power Circuit Breakers Used in Enclosures |
IEEE C37.11-2014
|
IEEE Standard Requirements for Electrical Control for AC High-Voltage (>1000 V) Circuit Breakers |
IEEE C2-2017
|
NATIONAL ELECTRICAL SAFETY CODE (NESC)(R) |
CSA Q634 : M91
|
RISK ANALYSIS REQUIREMENTS & GUIDELINES |
NFPA 70E : 2018
|
ELECTRICAL SAFETY IN THE WORKPLACE |
IEEE C37.011-2011 REDLINE
|
IEEE Guide for the Application of Transient Recovery Voltage for AC High-Voltage Circuit Breakers |
ANSI C37.7 : 1960
|
INTERRUPTING RATING FACTORS FOR RECLOSING SERVICE |
IEEE C37.09-1999
|
IEEE Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis |
IEC 60056-4A:1974
|
Supplement A - High-voltage alternating-current circuit-breakers - Part 4: Type tests and routine tests - Appendix E: Methods of determining prospective transient recovery voltage waves |
IEEE C37.012-2014
|
IEEE Guide for the Application of Capacitance Current Switching for AC High-Voltage Circuit Breakers Above 1000 V |
IEEE C37.20.7-2007 REDLINE
|
IEEE Guide for Testing Metal-Enclosed Switchgear Rated Up to 38 kV for Internal Arcing Faults |
IEC 62271-1:2017
|
High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear |
IEEE C57.117-1986
|
IEEE Guide for Reporting Failure Data for Power Transformers and Shunt Reactors on Electric Utility Power Systems |
IEEE C57.125-2015
|
IEEE Guide for Failure Investigation, Documentation, Analysis, and Reporting for Power Transformers and Shunt Reactors |
IEEE C37.015-2009
|
IEEE Guide for the Application of Shunt Reactor Switching |
IEC TR 62271-303:2008
|
High-voltage switchgear and controlgear - Part 303: Use and handling of sulphur hexafluoride (SF6) |
IEC TR 62271-305:2009
|
High-voltage switchgear and controlgear - Part 305: Capacitive current switching capability of air-insulated disconnectors for rated voltages above 52 kV |
IEC TR 62271-310:2008
|
High-voltage switchgear and controlgear - Part 310: Electrical endurance testing for circuit-breakers above a rated voltage of 52 kV |
IEEE 1584-2002
|
IEEE Guide for Performing Arc Flash Hazard Calculations |
IEEE C37.12-2008 REDLINE
|
IEEE Guide for Specifications of High-Voltage Circuit Breakers (over 1000 Volts) |
IEEE/ANSI C37.06.1-2000
|
American National Standard Guide for High-Voltage Circuit Breakers Rated on Symmetrical Current Basis Designated - Definite Purpose for Fast Transient Recovery Voltage Rise Times |
ANSI C37.9 : A70
|
TEST CD/AC HI-VOLTAGE CB RATED TOTAL CURRENT BASIS |
IEEE C37.14-2002
|
IEEE Standard for Low-Voltage DC Power Circuit Breakers Used in Enclosures |
IEEE 1332-2012
|
IEEE Standard Reliability Program for the Development and Production of Electronic Products |
IEEE C37.04-1999
|
IEEE Standard Rating Structure for AC High-Voltage Circuit Breakers |
IEEE C37.016-2006
|
IEEE Standard for AC High Voltage Circuit Switchers rated 15.5kV through 245kV |
IEEE C37.06-2009
|
IEEE Standard for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis--Preferred Ratings and Related Required Capabilities for Voltages Above 1000 V |
IEEE C37.101-2006 REDLINE
|
IEEE Guide for Generator Ground Protection |
IEEE C37.100-1992
|
IEEE Standard Definitions for Power Switchgear |
NFPA 422M : 1989
|
AIRCRAFT FIRE AND EXPLOSION INVESTIGATORS |