• IEEE C57.12.01 : 2015

    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

    GENERAL REQUIREMENTS FOR DRY-TYPE DISTRIBUTION AND POWER TRANSFORMERS

    Available format(s):  Hardcopy, PDF

    Superseded date:  19-04-2021

    Language(s):  English

    Published date:  27-02-2015

    Publisher:  Institute of Electrical & Electronics Engineers

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    1 Overview
    2 Normative references
    3 Definitions
    4 Service conditions
    5 Rating data
    6 Construction
    7 Short-circuit characteristics
    8 Testing and calculations
    9 Tolerances
    10 Connection of transformers for shipment
    Annex A (informative) - Bibliography
    Annex B (informative) - Insulation at high
            altitude

    Abstract - (Show below) - (Hide below)

    Defines electrical and mechanical requirements of single and polyphase ventilated, nonventilated, and sealed dry-type distribution and power transformers or autotransformers, with a voltage of 601 V or higher in the highest voltage winding.

    General Product Information - (Show below) - (Hide below)

    Development Note Supersedes IEEE DRAFT C57.12.01. (05/2006)
    Document Type Standard
    Publisher Institute of Electrical & Electronics Engineers
    Status Superseded
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    IEEE C57.94-1982 RECOMMENDED PRACTICE FOR INSTALLATION, APPLICATION, OPERATION, AND MAINTENANCE OF DRY-TYPE DISTRIBUTION AND POWER TRANSFORMERS
    IEEE DRAFT C57.123 : D1.7 OCT 2000 DRAFT GUIDE FOR TRANSFORMER LOSS MEASUREMENT
    IEEE 1653.2 : 2009 UNCONTROLLED TRACTION POWER RECTIFIERS FOR SUBSTATION APPLICATIONS UP TO 1500 V DC NOMINAL OUTPUT
    IEEE DRAFT C62.22 : D8 2005 GUIDE FOR THE APPLICATION OF METAL-OXIDE SURGE ARRESTERS FOR ALTERNATING-CURRENT SYSTEMS
    IEEE C57.32 : 2015 REQUIREMENTS, TERMINOLOGY, AND TEST PROCEDURES FOR NEUTRAL GROUNDING DEVICES
    IEEE C57.123 : 2010 IEEE GUIDE FOR TRANSFORMER LOSS MEASUREMENT
    IEEE C57.12.51 : 2008 VENTILATED DRY-TYPE POWER TRANSFORMERS, 501 KVA AND LARGER, THREE-PHASE, WITH HIGH-VOLTAGE 601 V TO 34 500 V; LOW-VOLTAGE 208Y/120 V TO 4160 V - GENERAL REQUIREMENTS
    IEEE 1566 : 2015 PERFORMANCE OF ADJUSTABLE-SPEED AC DRIVES RATED 375 KW AND LARGER
    IEEE C57.110 : 2008 ESTABLISHING LIQUID-FILLED AND DRY-TYPE POWER AND DISTRIBUTION TRANSFORMER CAPABILITY WHEN SUPPLYING NONSINUSOIDAL LOAD CURRENTS
    IEEE DRAFT C57.12.60 : OCT 97 DRAFT GUIDE FOR TEST PROCEDURES FOR THERMAL EVALUATION OF INSULATION SYSTEMS FOR SOLID-CAST AND RESIN-ENCAPSULATED POWER AND DISTRIBUTION TRANSFORMERS
    IEEE DRAFT C57.110 : D7 FEB 98 DRAFT RECOMMENDED PRACTICE FOR ESTABLISHING TRANSFORMER CAPABILITY WHEN SUPPLYING NONSINUSOIDAL LOAD CURRENTS
    IEEE C57.98:2011 GUIDE FOR TRANSFORMER IMPULSE TESTS
    IEEE C57.96 : 2013 GUIDE FOR LOADING DRY-TYPE DISTRIBUTION AND POWER TRANSFORMERS
    ANSI C57.12.52 : 2012 Sealed Dry-Type Power Transformers, 501 kVA and Higher, Three-Phase, with High-Voltage 601 to 34500 Volts, Low-Voltage 208Y/120 to 4160 Volts—General Requirements
    IEEE C37.302 : 2015 FAULT CURRENT LIMITER (FCL) TESTING OF FCLS RATED ABOVE 1000 V AC
    UFC 3-550-01 : CHANGE 1 UNIFIED FACILITIES CRITERIA - EXTERIOR ELECTRICAL POWER DISTRIBUTION
    IEEE C57.116 : 2014 GUIDE FOR TRANSFORMERS DIRECTLY CONNECTED TO GENERATORS
    IEEE C57.12.11 : 1980 GUIDE FOR INSTALLATION OF OIL-IMMERSED TRANSFORMERS (10 MVA AND LARGER, 69-287 KV RATING)
    IEEE DRAFT C37.91 : D7.0 2006 PROTECTING POWER TRANSFORMERS
    IEEE 421.3-1997 HIGH-POTENTIAL TEST REQUIREMENTS FOR EXCITATION SYSTEMS FOR SYNCHRONOUS MACHINES
    IEEE 638 : 2013 QUALIFICATION OF CLASS 1E TRANSFORMERS FOR NUCLEAR POWER GENERATING STATIONS
    IEEE DRAFT C57.18.10 : D12 APR 97 DRAFT PRACTICES AND REQUIREMENTS FOR SEMICONDUCTOR POWER RECTIFIER TRANSFORMER
    IEEE C57.12.60 : 2009 TEST PROCEDURE FOR THERMAL EVALUATION OF INSULATION SYSTEMS FOR DRY-TYPE POWER AND DISTRIBUTION TRANSFORMERS, INCLUDING OPEN-WOUND, SOLID-CAST, AND RESIN-ENCAPSULATED TRANSFORMERS
    API 540 : 1999 : R2006 ELECTRICAL INSTALLATIONS IN PETROLEUM PROCESSING PLANTS
    IEEE 3001.5 : 2013 RECOMMENDED PRACTICE FOR THE APPLICATION OF POWER DISTRIBUTION APPARATUS IN INDUSTRIAL AND COMMERCIAL POWER SYSTEMS
    IEEE 1531 : 2003 GUIDE FOR APPLICATION AND SPECIFICATION OF HARMONIC FILTERS
    IEEE C57.134:2013 IEEE GUIDE FOR DETERMINATION OF HOTTEST-SPOT TEMPERATURE IN DRY-TYPE TRANSFORMERS
    IEEE DRAFT C57.96 : D4.0 JAN 99 DRAFT GUIDE FOR LOADING DRY-TYPE DISTRIBUTION AND POWER TRANSFORMERS
    IEEE DRAFT 1313.2 : D6 DEC 98 DRAFT GUIDE FOR THE APPLICATION OF INSULATED COORDINATION
    ANSI C57.12.57 : 1987 AMERICAN NATIONAL STANDARD FOR TRANSFORMERS - VENTILATED DRY-TYPE NETWORK TRANSFORMERS 2500 KVA AND BELOW, THREE-PHASE, WITH HIGH-VOLTAGE 34500 VOLTS AND BELOW, LOW-VOLTAGE 216Y/125 AND 480Y/227 VOLTS - REQUIREMENTS
    IEEE C57.159:2016 IEEE GUIDE ON TRANSFORMERS FOR APPLICATION IN DISTRIBUTED PHOTOVOLTAIC (DPV) POWER GENERATION SYSTEMS
    IEEE C57.12.59-2015 DRY-TYPE TRANSFORMER THROUGH-FAULT CURRENT DURATION
    IEEE C37.121 : 2012 GUIDE FOR SWITCHGEAR - UNIT SUBSTATION - REQUIREMENTS
    IEEE C57.12.52:2012 SEALED DRY-TYPE POWER TRANSFORMERS, 501 KVA AND HIGHER, THREE-PHASE, WITH HIGH-VOLTAGE 601 TO 34500 VOLTS, LOW-VOLTAGE 208Y/120 TO 4160 VOLTS - GENERAL REQUIREMENTS
    IEEE C57.12.91 : 2011 DRY-TYPE DISTRIBUTION AND POWER TRANSFORMERS
    IEEE DRAFT 1531 : D2 OCT 2000 DRAFT GUIDE FOR APPLICATION FOR SPECIFICATION OF HARMONIC FILTERS
    API 540:1999 ELECTRICAL INSTALLATIONS IN PETROLEUM PROCESSING PLANTS
    IEEE 1147 : 2005 GUIDE FOR THE REHABILITATION OF HYDROELECTRIC POWER PLANTS
    IEEE C57.12.70-2011 STANDARD TERMINAL MARKINGS AND CONNECTIONS FOR DISTRIBUTION AND POWER TRANSFORMERS
    IEEE DRAFT 1313.1 : D11 MAY 95 INSULATION COORDINATION - DEFINITIONS, PRINCIPLES AND RULES
    IEEE 1653.1:2016 TRACTION POWER RECTIFIER TRANSFORMERS FOR SUBSTATION APPLICATIONS UP TO 1500 V DC NOMINAL OUTPUT
    C9-17 Dry-type transformers
    IEEE 1313.1 : 1996 INSULATION COORDINATION - DEFINITIONS, PRINCIPLES AND RULES (REVISION AND REDESIGNATION OF IEEE STD 1313-1993)
    ANSI C37.121 : 2012 AMERICAN NATIONAL STANDARD FOR SWITCHGEAR - UNIT SUBSTATIONS - REQUIREMENTS
    ASHRAE 90.4 : 2016 ENERGY STANDARD FOR DATA CENTERS

    Standards Referencing This Book - (Show below) - (Hide below)

    IEEE C57.12.60 : 2009 TEST PROCEDURE FOR THERMAL EVALUATION OF INSULATION SYSTEMS FOR DRY-TYPE POWER AND DISTRIBUTION TRANSFORMERS, INCLUDING OPEN-WOUND, SOLID-CAST, AND RESIN-ENCAPSULATED TRANSFORMERS
    IEEE C57.96 : 2013 GUIDE FOR LOADING DRY-TYPE DISTRIBUTION AND POWER TRANSFORMERS
    IEEE C57.12.70-2011 STANDARD TERMINAL MARKINGS AND CONNECTIONS FOR DISTRIBUTION AND POWER TRANSFORMERS
    IEEE C57.12.91 : 2011 DRY-TYPE DISTRIBUTION AND POWER TRANSFORMERS
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective