07/30169818 DC : 0
|
BS EN 1013 - LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
UNE-EN ISO 19062-1:2016
|
Plastics - Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 19062-1:2015) |
11/30192000 DC : 0
|
BS EN ISO 7792-1 - PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
08/30191997 DC : 0
|
BS ISO 1043-1 - PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMERS AND THEIR SPECIAL CHARACTERISTICS |
PREN ISO 14910-1 : DRAFT 2010
|
PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
13/30240164 DC : 0
|
BS ISO 16365-1 - PLASTICS - THERMOPLASTIC POLYURETHANES FOR MOULDING AND EXTRUSION - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
I.S. EN ISO 1874-1:2010
|
PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATION |
BS ISO 4894-1:1990
|
Plastics. Styrene/acrylonitrile (SAN) copolymer moulding and extrusion materials Designation |
I.S. EN ISO 4894-1:1999
|
PLASTICS - STYRENE/ACRYLONITRILE (SAN) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
PREN ISO 1043-2 : DRAFT 2008
|
PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 2: FILLERS AND REINFORCING MATERIALS |
I.S. EN ISO 12086-1:2006
|
PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
UNE-EN ISO 19063-1:2016
|
Plastics - Impact-resistant polystyrene (PS-I) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 19063-1:2015) |
DIN EN ISO 20028-1 E : 2017
|
PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS (ISO 20028-1:2017) |
DIN EN ISO 19066-1 E : 2015
|
PLASTICS - METHYL METHACRYLATE-ACRYLONITRILE-BUTADIENE-STYRENE (MABS) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS (ISO 19066-1:2014) |
DIN EN 15345:2008-02
|
Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates |
BS EN 60455-1:1998
|
Resin based reactive compounds used for electrical insulation Definitions and general requirements |
08/30161535 DC : 0
|
BS EN ISO 1874-1 - PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION |
12/30240423 DC : 0
|
BS ISO 16396-1 - PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM, MARKING OF PRODUCTS AND BASIS FOR SPECIFICATIONS |
BS EN ISO 19063-1:2015
|
Plastics. Impact-resistant polystyrene (PS-I) moulding and extrusion materials Designation system and basis for specifications |
04/300394 DC : DRAFT JAN 2004
|
IEC 61906 ED.1 - PROCEDURE FOR DECLARATION OF MATERIALS IN PRODUCTS OF THE ELECTROTECHNICAL AND ELECTRONICS INDUSTRY (DIN 19220 |
09/30198888 DC : 0
|
BS EN ISO 1043-2 - PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 2: FILLERS AND REINFORCING MATERIALS |
ASTM D 1972 : 1997
|
Standard Practice for Generic Marking of Plastic Products |
I.S. EN 15345:2007
|
PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYPROPYLENE (PP) RECYCLATES |
I.S. EN ISO 19064-1:2015
|
PLASTICS - STYRENE/ACRYLONITRILE (SAN) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS (ISO 19064-1:2015) |
I.S. EN ISO 19069-1:2015
|
PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS (ISO 19069-1:2015) |
ISO 16365-1:2014
|
Plastics — Thermoplastic polyurethanes for moulding and extrusion — Part 1: Designation system and basis for specifications |
DIN EN ISO 20568-2:2015-07 (Draft)
|
PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20568-2:2017) |
UNE-EN ISO 19065-1:2015
|
Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 19065-1:2014) |
I.S. EN ISO 19066-1:2014
|
PLASTICS - METHYL METHACRYLATE-ACRYLONITRILE-BUTADIENE-STYRENE (MABS) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS (ISO 19066-1:2014) |
DIN EN 14598-1:2005-07
|
Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 1: Designation |
BS EN 15347:2007
|
Plastics. Recycled Plastics. Characterization of plastics waste |
DIN EN 15342 E : 2008
|
PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLYSTYRENE (PS) RECYCLATES |
BS EN ISO 7792-1:2012
|
Plastics. Thermoplastic polyester (TP) moulding and extrusion materials Designation system and basis for specifications |
BS EN ISO 15526-1:2004
|
Plastics. Polyketone (PK) moulding and extrusion materials Designation system and basis for specifications |
ISO 7792-1:2012
|
Plastics Thermoplastic polyester (TP) moulding and extrusion materials Part 1: Designation system and basis for specifications |
BS EN ISO 12086-1:2006
|
Plastics. Fluoropolymer dispersions and moulding and extrusion materials Designation system and basis for specifications |
BS EN ISO 15252-1:2000
|
Plastics. Epoxy powder moulding compounds (EP-PMCs) Designation system and basis for specifications |
BS EN ISO 14526-1:2000
|
Plastics. Phenolic powder moulding compounds (PF-PMCs) Designation system and basis for specifications |
DIN EN ISO 3672-1:2002-07
|
PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 1: DESIGNATION SYSTEM |
EN 175301-801:2006
|
Detail Specification: High density rectangular connectors, round removable crimp contacts |
CEN/TR 15353:2007
|
Plastics - Recycled plastics - Guidelines for the development of standards for recycled plastics |
EN 12676-2 : 2000
|
ANTI-GLARE SYSTEMS FOR ROADS - PART 2: TEST METHODS |
DIN EN ISO 12086-1:2006-05
|
PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
EN 1013:2012+A1:2014
|
LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
DIN EN ISO 2580-1:2003-02
|
PLASTICS - ACRYLONITRILE-BUTADIENE-STYRENE (ABS) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
EN 13473-1:2001
|
Reinforcement - Specifications for multi-axial multi-ply fabrics - Part 1: Designation |
EN 12676-1:2000/A1:2003
|
ANTI-GLARE SYSTEMS FOR ROADS - PART 1: PERFORMANCE AND CHARACTERISTICS |
EN 12971-1:1999
|
Reinforcements - Specification for textile glass chopped strands - Part 1: Designation |
DIN EN ISO 20568-2:2017-10
|
PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20568-2:2017) |
I.S. EN ISO 20028-1:2017
|
PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS (ISO 20028-1:2017) |
I.S. EN ISO 12086-2:2006
|
PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
DIN EN ISO 19064-1:2016-05
|
PLASTICS - STYRENE/ACRYLONITRILE (SAN) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS (ISO 19064-1:2015) |
I.S. EN ISO 1873-1:1996
|
PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
I.S. EN ISO 15103-1:2004
|
PLASTICS - POLY(PHENYLENE ETHER) (PPE) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
DIN EN ISO 19063-1 E : 2016
|
PLASTICS - IMPACT-RESISTANT POLYSTYRENE (PS-I) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS (ISO 19063-1:2015) |
BS ISO 2580-1:1990
|
Plastics. Acrylonitrile/butadiene/styrene (ABS) moulding and extrusion materials Designation |
12/30258334 DC : 0
|
BS EN 1013 - LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTIC SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
CEI EN 62474 : 2013
|
MATERIAL DECLARATION FOR PRODUCTS OF AND FOR THE ELECTROTECHNICAL INDUSTRY |
PREN ISO 7792-1 : DRAFT 2011
|
PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
DIN EN ISO 20568-2 E : 2017
|
PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20568-2:2017) |
ASTM D 1972 : 1997 : R2001
|
Standard Practice for Generic Marking of Plastic Products |
15/30304399 DC : 0
|
BS EN ISO 20028-1 - PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
UNI EN ISO 19065-1 : 2015
|
PLASTICS - ACRYLONITRILE-STYRENE-ACRYLATE (ASA), ACRYLONITRILE- (ETHYLENE-PROPYLENE-DIENE)-STYRENE (AEPDS) AND ACRYLONITRILE- (CHLORINATED POLYETHYLENE)-STYRENE (ACS) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
PREN ISO 1874-1 : DRAFT 2008
|
PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION |
17/30365666 DC : 0
|
BS EN 62474 - MATERIAL DECLARATION FOR PRODUCTS OF AND FOR THE ELECTROTECHNICAL INDUSTRY |
EN 14344:2004
|
Child use and care articles - Child seats for cycles - Safety requirements and test methods |
UNE-EN ISO 19064-1:2016
|
Plastics - Styrene/acrylonitrile (SAN) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 19064-1:2015) |
IEC TR 62392:2006
|
Suitability of typical electrical insulating material (EIM) for polymer recycling |
UNI EN 15345 : 2008
|
PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYPROPYLENE (PP) RECYCLATES |
IEC TR 62422:2007
|
Environmental characterization of solid insulating materials |
I.S. EN ISO 19063-1:2015
|
PLASTICS - IMPACT-RESISTANT POLYSTYRENE (PS-I) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS (ISO 19063-1:2015) |
EN ISO 1043-4:1999/A1:2016
|
PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 4: FLAME RETARDANTS (ISO 1043-4:1998/AMD 1:2016) |
ASTM D 5575 : 2007 : R2013
|
Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers |
ASTM D 1600 : 2018 : REDLINE
|
Standard Terminology for Abbreviated Terms Relating to Plastics |
ASTM D 5575 : 2007
|
Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers |
I.S. EN ISO 20568-2:2017
|
PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20568-2:2017) |
DIN EN ISO 3672-1 E : 2002
|
PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 1: DESIGNATION SYSTEM |
DIN EN 15347:2008-02
|
Plastics - Recycled Plastics - Characterisation of plastics wastes |
DIN EN 15347 E : 2008
|
PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF PLASTICS WASTES |
UNE-EN ISO 7792-1:2013
|
Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 7792-1:2012) |
DIN EN 12676-1 E : 2003
|
ANTI-GLARE SYSTEMS FOR ROADS - PART 1: PERFORMANCE AND CHARACTERISTICS |
DIN EN ISO 15023-1:2016-03 (Draft)
|
PLASTICS - POLY(VINYL ALCOHOL) (PVAL) MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS (ISO 15023-1:2017) |
BS EN ISO 15023-1:2017
|
Plastics. Poly(vinyl alcohol) (PVAL) materials Designation system and basis for specifications |
ISO 19065-1:2014
|
Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 1: Designation system and basis for specifications |
BS EN 13473-1:2001
|
Reinforcement. Specifications for multi-axial multi-ply fabrics Designation |
I.S. EN ISO 15023-1:2017
|
PLASTICS - POLY(VINYL ALCOHOL) (PVAL) MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS (ISO 15023-1:2017) |
DIN EN 14344:2004-11
|
Child use and care articles - Child seats for cycles - Safety requirements and test methods |
DIN EN ISO 15103-1:2004-10
|
PLASTICS - POLY(PHENYLENE ETHER) (PPE) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
I.S. EN ISO 11469:2016
|
PLASTICS - GENERIC IDENTIFICATION AND MARKING OF PLASTICS PRODUCTS (ISO 11469:2016) |
DIN EN ISO 15526-1:2004-10
|
PLASTICS - POLYKETONE (PK) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
I.S. EN ISO 15526-1:2004
|
PLASTICS - POLYKETONE (PK) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
VDE 0355-1 : 1999
|
RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - DEFINITIONS AND GENERAL REQUIREMENTS |
DIN EN 60455-1 : 1999
|
RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 1: DEFINITIONS AND GENERAL REQUIREMENTS |
BS 3502-3:1993
|
Symbols for plastics and rubber materials Schedule for symbols for compounding ingredients |
VDI/VDE 2616 Blatt 2:2014-07
|
Hardness testing of plastics and elastomers |
DIN EN ISO 19069-1:2015-06
|
PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS (ISO 19069-1:2015) |
09/30154135 DC : 0
|
BS EN 62474 - MATERIAL DECLARATION FOR ELECTRICAL AND ELECTRONIC EQUIPMENT |
ASTM D 1972 : 1997 : R2005
|
Standard Practice for Generic Marking of Plastic Products (Withdrawn 2014) |
PD CEN/TR 15438:2007
|
Plastics piping systems. Guidance for coding of products and their intended uses |
DIN EN ISO 16396-1:2015-05
|
Plastics - Polyamide (PA) moulding and extrusion materials - Part 1: Designation system, marking of products and basis for specifications (ISO 16396-1:2015) |
BS EN ISO 19069-1:2015
|
Plastics. Polypropylene (PP) moulding and extrusion materials Designation system and basis for specifications |
08/30165041 DC : DRAFT FEB 2008
|
BS ISO 28078-1 - PLASTICS - POLY(PHENYLENE SULFIDE) (PPS) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
DIN EN ISO 19066-1:2015-02
|
PLASTICS - METHYL METHACRYLATE-ACRYLONITRILE-BUTADIENE-STYRENE (MABS) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS (ISO 19066-1:2014) |
DIN EN 1013:2015-03
|
LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
I.S. EN ISO 7792-1:2012
|
PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS (ISO 7792-1:2012) |
DIN EN ISO 19069-1 E : 2015
|
PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS (ISO 19069-1:2015) |
BS EN 62474:2012
|
Material declaration for products of and for the electrotechnical industry |
14/30282909 DC : 0
|
BS EN ISO 19063-1 - PLASTICS - IMPACT-RESISTANT POLYSTYRENE (PS-I) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS (ISO 2897-1:1997) |
DIN EN ISO 19063-1:2016-05
|
PLASTICS - IMPACT-RESISTANT POLYSTYRENE (PS-I) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS (ISO 19063-1:2015) |
07/30161754 DC : 0
|
BS ISO 15270 - PLASTICS - GUIDELINES FOR THE RECOVERY AND RECYCLING OF PLASTICS WASTE |
UNI EN 15347 : 2008
|
PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF PLASTICS WASTES |
14/30282913 DC : 0
|
BS EN ISO 19064-1 - PLASTICS - STYRENE/ACRYLONITRILE (SAN) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS (ISO 4894-1:1997) |
07/30152072 DC : 0
|
BS ISO 25137-1 - PLASTICS - SULFONE PLASTICS (SP) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
16/30294727 DC : 0
|
BS EN ISO 15023-1 - PLASTICS - POLY(VINYL ALCOHOL) (PVAL) MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
BS ISO 11542-1:1994
|
Plastics. Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials Designation system and basis for specifications |
03/118817 DC : DRAFT DEC 2003
|
BS EN ISO 7391-1 - PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATION |
BS EN ISO 16396-1:2015
|
Plastics. Polyamide (PA) moulding and extrusion materials Designation system, marking of products and basis for specifications |
04/30117816 DC : DRAFT AUG 2004
|
ISO/DIS 9393-2 - THERMOPLASTICS VALVES FOR INDUSTRIAL APPLICATIONS - PRESSURE TEST METHODS AND REQUIREMENTS - PART 2: TEST CONDITIONS AND BASIC REQUIREMENTS |
BS EN 175301-801:2006
|
Detail specification. High density rectangular connectors, round removable crimp contacts |
DIN EN ISO 19062-1 E : 2016
|
PLASTICS - ACRYLONITRILE-BUTADIENE-STYRENE (ABS) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS (ISO 19062-1:2015) |
BS EN 1013 : 2012
|
LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
10/30196253 DC : 0
|
BS ISO 14910-1 - PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
SAE J 1344 : 1997(S2017)
|
MARKING OF PLASTIC PARTS |
SAE J 2332 : 2013
|
MARKING OF RUBBER PARTS |
UNI EN 15342 : 2008
|
PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLYSTYRENE (PS) RECYCLATES |
EN ISO 1043-1:2011/A1:2016
|
PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMER AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011/AMD 1:2016) |
DIN EN ISO 1043-4:2016-09
|
Plastics - Symbols and abbreviated terms - Part 4: Flame retardants (ISO 1043-4:1998 + Amd.1:2016); German version EN ISO 1043-4:1999 + A1:2016 |
DIN EN 15342:2008-02
|
Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates |
ISO 14526-1:1999
|
Plastics Phenolic powder moulding compounds (PF-PMCs) Part 1: Designation system and basis for specifications |
BS EN ISO 12086-2:2006
|
Plastics. Fluoropolymer dispersions and moulding and extrusion materials Preparation of test specimens and determination of properties |
ISO 15023-1:2017
|
Plastics — Poly(vinyl alcohol) (PVAL) materials — Part 1: Designation system and basis for specifications |
BS EN 12676-2:2000
|
Anti-glare systems for roads Test methods |
ISO 4894-1:1997
|
Plastics Styrene/acrylonitrile (SAN) moulding and extrusion materials Part 1: Designation system and basis for specifications |
ISO 15526-1:2000
|
Plastics Polyketone (PK) moulding and extrusion materials Part 1: Designation system and basis for specifications |
UNE-EN ISO 20028-1:2017
|
Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 20028-1:2017) |
EN ISO 14527-1 : 1999
|
Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) - Part 1: Designation system and basis for specifications (ISO 14527-1:1999) |
EN ISO 12086-1:2006/AC:2007
|
PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
BS 3502-1:1991
|
Symbols for plastics and rubber materials Schedule for symbols for plastics |
EN ISO 3672-1:2001
|
Plastics - Unsaturated-polyester resins (UP-R) - Part 1: Designation system (ISO 3672-1:2000) |
UNI EN ISO 1874-1 : 2011
|
PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATION |
ISO 19064-1:2015
|
Plastics — Styrene/acrylonitrile (SAN) moulding and extrusion materials — Part 1: Designation system and basis for specifications |
UNI EN ISO 7792-1 : 2013
|
PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
UNI EN ISO 12086-2 : 2006
|
PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
UNE-EN ISO 19066-1:2015
|
Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 19066-1:2014) |
DIN EN ISO 19062-1:2016-05
|
PLASTICS - ACRYLONITRILE-BUTADIENE-STYRENE (ABS) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS (ISO 19062-1:2015) |
BS EN 175301-803:2006
|
Detail specification: rectangular connectors. Flat contacts, 0,8 mm thickness, locking screw not detachable |
DIN EN ISO 19064-1 E : 2016
|
PLASTICS - STYRENE/ACRYLONITRILE (SAN) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS (ISO 19064-1:2015) |
BS EN ISO 19066-1:2014
|
Plastics. Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials Designation system and basis for specifications |
BS EN ISO 19064-1:2015
|
Plastics. Styrene/acrylonitrile (SAN) moulding and extrusion materials Designation system and basis for specifications |
BS EN 175201-804:2000
|
Harmonized system of quality assessment for electronic components Detail specification. Circular connectors. Round contacts, size diameter 1,6 mm, threaded coupling |
15/30302735 DC : 0
|
BS EN ISO 11469 - PLASTICS - GENERIC IDENTIFICATION AND MARKING OF PLASTICS PRODUCTS |
BS EN 15345:2007
|
Plastics. Recycled plastics. Characterization of polypropylene (PP) recyclates |
04/30091867 DC : DRAFT FEB 2004
|
BS EN ISO 12086-1 - PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
BS EN ISO 19062-1:2015
|
Plastics. Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials Designation system and basis for specifications |
14/30295469 DC : 0
|
BS EN ISO 19062-1 - PLASTICS - ACRYLONITRILE-BUTADIENE-STYRENE (ABS) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
15/30321222 DC : 0
|
BS EN ISO 20568-1 - PLASTICS - FLUOROPOLYMER DISPERSION AND MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
15/30321226 DC : 0
|
BS EN ISO 20568-2 - PLASTICS - FLUOROPOLYMER DISPERSION AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
DD IEC PAS 61906 : DRAFT DEC 2005
|
PROCEDURE FOR THE DECLARATION OF MATERIALS IN PRODUCTS OF THE ELECTROTECHNICAL AND ELECTRONIC INDUSTRY |
DIN EN 15345 E : 2008
|
PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYPROPYLENE (PP) RECYCLATES |
UNE-EN ISO 19069-1:2015
|
Plastics - Polypropylene (PP) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 19069-1:2015) |
BS EN ISO 19065-1:2014
|
Plastics. Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials Designation system and basis for specifications |
13/30283996 DC : 0
|
BS EN ISO 19069-1 - PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
DIN EN ISO 19065-1:2015-03
|
PLASTICS - ACRYLONITRILE-STYRENE-ACRYLATE (ASA), ACRYLONITRILE-(ETHYLENE-PROPYLENE-DIENE)-STYRENE (AEPDS) AND ACRYLONITRILE-(CHLORINATED POLYETHYLENE)-STYRENE (ACS) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS (ISO 19065-1:2014) |
13/30283992 DC : 0
|
BS EN ISO 19066-1 - PLASTICS - METHYL METHACRYLATE-ACRYLONITRILE-BUTADIENE-STYRENE (MABS) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
I.S. EN ISO 19062-1:2015
|
PLASTICS - ACRYLONITRILE-BUTADIENE-STYRENE (ABS) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS (ISO 19062-1:2015) |
07/30163279 DC : 0
|
BS EN ISO 28941-1 - PLASTICS - POLY(PHENYLENE ETHER) (PPE) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
BS ISO 12086-2 : 2001 AMD 10637
|
PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS |
ISO 15270:2008
|
Plastics — Guidelines for the recovery and recycling of plastics waste |
I.S. EN 60455-1:1999
|
RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 1: DEFINITIONS AND GENERAL REQUIREMENTS |
I.S. EN 1013:2012
|
LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
CEI EN 60455-1 : 1999
|
RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 1: DEFINITIONS AND GENERAL REQUIREMENTS |
DIN EN ISO 20028-1:2015-08 (Draft)
|
PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS (ISO 20028-1:2017) |
I.S. EN 62474:2012
|
MATERIAL DECLARATION FOR PRODUCTS OF AND FOR THE ELECTROTECHNICAL INDUSTRY (IEC 62474:2012 (EQV)) |
BS EN ISO 1043-4 : 1999
|
PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 4: FLAME RETARDANTS (ISO 1043-4:1998/AMD 1:2016) |
UNE-EN ISO 1043-1:2012
|
Plastics - Symbols and abbreviated terms - Part 1: Basic polymers and their special characteristics (ISO 1043-1:2011) |
DIN EN ISO 1043-1:2016-09
|
PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMERS AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011 + AMD.1:2016) |
BS EN ISO 11469:2016
|
Plastics. Generic identification and marking of plastics products |
ISO 19063-1:2015
|
Plastics — Impact-resistant polystyrene (PS-I) moulding and extrusion materials — Part 1: Designation system and basis for specifications |
BS EN 12676-1:2000
|
Anti-glare systems for roads Performance and characteristics |
BS EN ISO 1874-1:2001
|
Plastics. Polyamide (PA) moulding and extrusion materials Designation |
ISO 20568-2:2017
|
Plastics Fluoropolymer dispersions and moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
UNE-EN ISO 15023-1:2017
|
Plastics - Poly(vinyl alcohol) (PVAL) materials - Part 1: Designation system and basis for specifications (ISO 15023-1:2017) |
ISO 14530-1:1999
|
Plastics Unsaturated-polyester powder moulding compounds (UP-PMCs) Part 1: Designation system and basis for specifications |
ISO 15103-1:2000
|
Plastics Poly(phenylene ether) (PPE) moulding and extrusion materials Part 1: Designation system and basis for specifications |
ISO 1874-1:2010
|
Plastics Polyamide (PA) moulding and extrusion materials Part 1: Designation system and basis for specification |
ISO 14529-1:1999
|
Plastics Melamine/phenolic powder moulding compounds (MP-PMCs) Part 1: Designation system and basis for specifications |
BS EN ISO 14528-1:2000
|
Plastics. Melamine-formaldehyde powder moulding compounds (MF-PMCs) Designation system and basis for specifications |
ISO 16396-1:2015
|
Plastics — Polyamide (PA) moulding and extrusion materials — Part 1: Designation system, marking of products and basis for specifications |
ISO 12086-2:2006
|
Plastics Fluoropolymer dispersions and moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
IEC 62474:2012
|
Material declaration for products of and for the electrotechnical industry |
BS EN 14020-1:2002
|
Reinforcements. Specification for textile glass rovings Designation |
ISO 1043-4:1998
|
Plastics Symbols and abbreviated terms Part 4: Flame retardants |
ISO 19066-1:2014
|
Plastics — Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials — Part 1: Designation system and basis for specifications |
ISO 19069-1:2015
|
Plastics Polypropylene (PP) moulding and extrusion materials Part 1: Designation system and basis for specifications |
ISO 11469:2016
|
Plastics — Generic identification and marking of plastics products |
ISO 15252-1:1999
|
Plastics Epoxy powder moulding compounds (EP-PMCs) Part 1: Designation system and basis for specifications |
UNE-EN 1013:2013
|
Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings - Requirements and test methods |
ISO 14528-1:1999
|
Plastics Melamine-formaldehyde powder moulding compounds (MF-PMCs) Part 1: Designation system and basis for specifications |
ISO 12086-1:2006
|
Plastics Fluoropolymer dispersions and moulding and extrusion materials Part 1: Designation system and basis for specifications |
ISO 3672-1:2000
|
Plastics Unsaturated-polyester resins (UP-R) Part 1: Designation system |
BS EN 14344:2004
|
Child use and care articles. Child seats for cycles. Safety requirements and test methods |
BS EN ISO 15103-1:2004
|
Plastics. Poly(phenylene ether) (PPE) moulding and extrusion materials Designation system and basis for specifications |
UNE-EN ISO 11469:2017
|
Plastics - Generic identification and marking of plastics products (ISO 11469:2016) |
BS EN 13677-1:2003
|
Reinforced thermoplastic moulding compounds. Specification for GMT Designation |
BS EN 15342:2007
|
Plastics. Recycled plastics. Characterization of polystyrene (PS) recyclates |
UNE-CEN/TR 15438:2012 IN
|
Plastics piping systems - Guidance for coding of products and their intended uses |
BS EN ISO 3672-1:2001
|
Plastics. Unsaturated-polyester resins (UP-R) Designation system |
DIN EN 12676-1:2003-08
|
Anti-glare systems for roads - Part 1: Performance and characteristics (includes Amendment A1:2003); German version EN 12676-1:2000 + A1:2003 |
BS EN ISO 1873-1:1995
|
Plastics. Polypropylene (PP) moulding and extrusion materials Designation system and basis for specifications |
EN 175201-804:1999
|
Detail Specification: Circular connectors - Round contacts, size diameter 1,6 mm, threaded coupling |
EN 175301-803:2006
|
Detail Specification: Rectangular connectors - Flat contacts, 0,8 mm thickness, locking screw not detachable |
EN 15342:2007
|
Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates |
EN ISO 15252-1 : 1999
|
PLASTICS - EPOXY POWDER MOULDING COMPOUNDS (EP-PMCS) - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
EN ISO 1874-1:2010
|
Plastics - Polyamide (PA) moulding and extrusion materials - Part 1: Designation system and basis for specification (ISO 1874-1:2010) |
EN ISO 15103-1:2004
|
Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 15103-1:2000) |
EN 13677-1:2003
|
Reinforced thermoplastic moulding compounds - Specification for GMT - Part 1: Designation |
EN ISO 12086-2:2006/AC:2009
|
PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
EN 15347:2007
|
Plastics - Recycled Plastics - Characterisation of plastics wastes |
EN 15345:2007
|
Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates |
EN ISO 15023-1:2017
|
Plastics - Poly(vinyl alcohol) (PVAL) materials - Part 1: Designation system and basis for specifications (ISO 15023-1:2017) |
EN ISO 7792-1:2012
|
Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 7792-1:2012) |
EN ISO 19065-1:2014
|
Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 19065-1:2014) |
EN ISO 11469:2016
|
Plastics - Generic identification and marking of plastics products (ISO 11469:2016) |
EN ISO 20568-2:2017
|
Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 20568-2:2017) |
EN 14020-1:2002
|
Reinforcements - Specification for textile glass rovings - Part 1: Designation |
EN ISO 15526-1:2004
|
Plastics - Polyketone (PK) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 15526-1:2000) |
EN ISO 19064-1:2015
|
Plastics - Styrene/acrylonitrile (SAN) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 19064-1:2015) |
EN ISO 14528-1 : 1999
|
PLASTICS - MELAMINE-FORMALDEHYDE POWDER MOULDING COMPOUNDS (MF-PMCS) - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
EN ISO 4894-1 : 1999
|
PLASTICS - STYRENE/ACRYLONITRILE (SAN) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
EN ISO 20028-1:2017
|
Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 20028-1:2017) |
EN ISO 14526-1 : 1999
|
PLASTICS - PHENOLIC POWDER MOULDING COMPOUNDS (PF/PMCS) - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
EN ISO 19062-1 : 2015
|
PLASTICS - ACRYLONITRILE-BUTADIENE-STYRENE (ABS) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS (ISO 19062-1:2015) |
EN ISO 16396-1:2015
|
Plastics - Polyamide (PA) moulding and extrusion materials - Part 1: Designation system, marking of products and basis for specifications (ISO 16396-1:2015) |
EN ISO 19066-1:2014
|
Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 19066-1:2014) |
EN 14598-1:2005
|
Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 1: Designation |
EN ISO 19063-1 : 2015
|
PLASTICS - IMPACT-RESISTANT POLYSTYRENE (PS-I) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS (ISO 19063-1:2015) |
EN ISO 19069-1:2015
|
Plastics - Polypropylene (PP) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 19069-1:2015) |
DIN EN ISO 16396-1 E : 2015
|
PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM, MARKING OF PRODUCTS AND BASIS FOR SPECIFICATIONS (ISO 16396-1:2015) |
UNE-EN ISO 16396-1:2015
|
Plastics - Polyamide (PA) moulding and extrusion materials - Part 1: Designation system, marking of products and basis for specifications (ISO 16396-1:2015) |
04/30116868 DC : DRAFT JUL 2004
|
EN 175301-803 - DETAIL SPECIFICATION - RECTANGULAR CONNECTORS - FLAT CONTACTS, 0,8 MM THICKNESS, LOCKING SCREW NOT DETACHABLE |
UNE-EN ISO 20568-2:2017
|
Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 20568-2:2017) |
13/30283988 DC : 0
|
BS EN ISO 19065-1 - PLASTICS - ACRYLONITRILE-STYRENE-ACRYLATE (ASA), ACRYLONITRILE-(ETHYLENE-PROPYLENE-DIENE)-STYRENE (AEPDS) AND ACRYLONITRILE-(CHLORINATED POLYETHYLENE)-STYRENE (ACS) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
BS ISO 16365-1:2014
|
Plastics. Thermoplastic polyurethanes for moulding and extrusion Designation system and basis for specifications |
BS ISO 6402-1:1990
|
Plastics. Impact resistant acrylonitrile/styrene moulding and extrusion materials (ASA, AES, ACS), excluding butadiene-modified materials Designation |
UNI EN ISO 19066-1 : 2014
|
PLASTICS - METHYL METHACRYLATE-ACRYLONITRILE-BUTADIENE-STYRENE (MABS) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
NF EN 60455-1 : 1999
|
RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - DEFINITIONS AND GENERAL REQUIREMENTS |
BS ISO 12086-1 : 1995 AMD 10638
|
PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
DIN EN ISO 19065-1 E : 2015
|
PLASTICS - ACRYLONITRILE-STYRENE-ACRYLATE (ASA), ACRYLONITRILE-(ETHYLENE-PROPYLENE-DIENE)-STYRENE (AEPDS) AND ACRYLONITRILE-(CHLORINATED POLYETHYLENE)-STYRENE (ACS) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS (ISO 19065-1:2014) |
CEI EN 175301-803 : 2007
|
DETAIL SPECIFICATION: RECTANGULAR CONNECTORS - FLAT CONTACTS, 0,8 MM THICKNESS, LOCKING SCREW NOT DETACHABLE |
BS EN ISO 20568-2:2017
|
Plastics. Fluoropolymer dispersions and moulding and extrusion materials Preparation of test specimens and determination of properties |
04/30091870 DC : DRAFT FEB 2004
|
BS EN ISO 12086-2 - PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
UNI EN 1013 : 2015
|
LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
I.S. EN ISO 1043-1:2011
|
PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMERS AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011) |
IEC PAS 61906:2005
|
Procedure for the declaration of materials in products of the electrotechnical and electronic industry |
SAE J 2594 : 2016
|
RECOMMENDED PRACTICE TO DESIGN FOR RECYCLING PROTON EXCHANGE MEMBRANE (PEM) FUEL CELL SYSTEMS |
CEI EN 175301-801 : 2007
|
DETAIL SPECIFICATION: HIGH DENSITY RECTANGULAR CONNECTORS, ROUND REMOVABLE CRIMP CONTACTS |
I.S. EN 175301-801:2006
|
DETAIL SPECIFICATION: HIGH DENSITY RECTANGULAR CONNECTORS, ROUND REMOVABLE CRIMP CONTACTS |
S.R. CEN/TR 15353:2007
|
PLASTICS - RECYCLED PLASTICS - GUIDELINES FOR THE DEVELOPMENT OF STANDARDS FOR RECYCLED PLASTICS |
I.S. EN ISO 19065-1:2014
|
PLASTICS - ACRYLONITRILE-STYRENE-ACRYLATE (ASA), ACRYLONITRILE-(ETHYLENE-PROPYLENE-DIENE)-STYRENE (AEPDS) AND ACRYLONITRILE-(CHLORINATED POLYETHYLENE)-STYRENE (ACS) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS (ISO 19065-1:2014) |
I.S. EN ISO 16396-1:2015
|
PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM, MARKING OF PRODUCTS AND BASIS FOR SPECIFICATIONS (ISO 16396-1:2015) |
ISO 1043-1:2011
|
Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics |
BS EN ISO 20028-1:2017
|
Plastics. Thermoplastic polyester (TP) moulding and extrusion materials Designation system and basis for specifications |
I.S. EN ISO 1043-4:1999
|
PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 4: FLAME RETARDANTS (ISO 1043-4:1998) |
BS EN ISO 1043-1:2011
|
PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMERS AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011) |
DIN EN 14344 E : 2004
|
|
DIN EN ISO 7792-1:2013-03
|
PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS (ISO 7792-1:2012) |
BS EN ISO 4894-1:1999
|
Plastics. Styrene/acrylonitrile (SAN) copolymer moulding and extrusion materials Designation system and basis for specifications |
ISO 19062-1:2015
|
Plastics — Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials — Part 1: Designation system and basis for specifications |
ISO 20028-1:2017
|
Plastics Thermoplastic polyester (TP) moulding and extrusion materials Part 1: Designation system and basis for specifications |
BS EN 12971-1:1999
|
Reinforcements. Specification for textile glass chopped strands Designation |
03/314451 DC : DRAFT SEP 2003
|
IEC 62392 TR ED.1 - SUITABILITY OF TYPICAL ELECTRICAL INSULATING MATERIAL FOR POLYMER RECYCLING |
BS EN 14598-1:2005
|
Reinforced thermosetting moulding compounds. Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC) Designation |
ISO 14527-1:1999
|
Plastics Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) Part 1: Designation system and basis for specifications |
BS EN ISO 14530-1:2000
|
Plastics. Unsaturated-polyester powder moulding compounds (UP-PMCs) Designation system and basis for specifications |
EN 13473-2:2001
|
Reinforcement - Specifications for multi-axial multi-ply fabrics - Part 2: Methods of test and general requirements |
DIN EN ISO 12086-2:2006-05
|
PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
EN 62474:2012
|
Material declaration for products of and for the electrotechnical industry |
CEN/TR 15438:2007
|
Plastics piping systems - Guidance for coding of products and their intended uses |