BS ISO 2017-1:2005
|
Mechanical vibration and shock. Resilient mounting systems Technical information to be exchanged for the application of isolation systems |
DIN EN 13146-9:2011-12
|
RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 9: DETERMINATION OF STIFFNESS |
BS ISO 18312-2:2012
|
Mechanical vibration and shock. Measurement of vibration power flow from machines into connected support structures Indirect method |
MIL-DTL-17508 Revision G:2017
|
Mounts, Resilient: Types 6E100, 6E150, 7E450, 6E900, 6E2000, 5E3500, 6E100BB, 6E150BB, 7E450BB, and 6E900BB |
UNE-EN 13146-9:2011
|
Railway applications - Track - Test methods for fastening systems - Part 9: Determination of stiffness |
ISO 18437-5:2011
|
Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 5: Poisson ratio based on comparison between measurements and finite element analysis |
ISO 18437-2:2005
|
Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 2: Resonance method |
ANSI/ASA S2.9 : 2008(R2018)
|
PARAMETERS FOR SPECIFYING DAMPING PROPERTIES OF MATERIALS AND SYSTEM DAMPING |
UNI EN 13146-9 : 2011
|
RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 9: DETERMINATION OF STIFFNESS |
BS EN ISO 10846-2:2008
|
Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements Direct method for determination of the dynamic stiffness of resilient supports for translatory motion |
BS EN ISO 10846-4:2003
|
Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements Dynamic stiffness of elements other than resilient supports for translatory motion |
EN 12354-5:2009/AC:2010
|
BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDING FROM THE PERFORMANCE OF ELEMENTS - PART 5: SOUNDS LEVELS DUE TO THE SERVICE EQUIPMENT |
ONORM EN 12354-5 : 2011
|
BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDING FROM THE PERFORMANCE OF ELEMENTS - PART 5: SOUNDS LEVELS DUE TO THE SERVICE EQUIPMENT |
I.S. EN 12354-5:2009
|
BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDING FROM THE PERFORMANCE OF ELEMENTS - PART 5: SOUNDS LEVELS DUE TO THE SERVICE EQUIPMENT |
15/30293881 DC : 0
|
BS ISO 2017-3 - MECHANICAL VIBRATION AND SHOCK - RESILIENT MOUNTING SYSTEMS - PART 3: TECHNICAL INFORMATION TO BE EXCHANGED FOR APPLICATION OF VIBRATION ISOLATION TO NEW BUILDINGS |
11/30131826 DC : 0
|
BS ISO 18312-2 - MECHANICAL VIBRATION AND SHOCK - MEASUREMENT OF VIBRATION POWER FLOW FROM MACHINES INTO CONNECTED SUPPORT STRUCTURES - PART 2: INDIRECT METHOD |
MIL-PRF-32407 Revision A:2016
|
MOUNTS, RESILIENT (SURFACE SHIP APPLICATION) |
05/30064424 DC : DRAFT NOV 2005
|
ISO 10846-5 - ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 5: LOW FREQUENCY DYNAMIC STIFFNESS OF ELASTIC SUPPORTS FOR TRANSLATORY MOTION (DRIVING POINT METHOD) |
BS ISO 2017-3:2015
|
Mechanical vibration and shock. Resilient mounting systems Technical information to be exchanged for application of vibration isolation to new buildings |
ISO 18312-2:2012
|
Mechanical vibration and shock — Measurement of vibration power flow from machines into connected support structures — Part 2: Indirect method |
BS ISO 18437-3 : 2005
|
MECHANICAL VIBRATION AND SHOCK - CHARACTERIZATION OF THE DYNAMIC MECHANICAL PROPERTIES OF VISCO-ELASTIC MATERIALS - PART 3: CANTILEVER SHEAR BEAM METHOD |
BS ISO 18437-2 : 2005
|
MECHANICAL VIBRATION AND SHOCK - CHARACTERIZATION OF THE DYNAMIC MECHANICAL PROPERTIES OF VISCO-ELASTIC MATERIALS - PART 2: RESONANCE METHOD |
ANSI S2.9:2008
|
PARAMETERS FOR SPECIFYING DAMPING PROPERTIES OF MATERIALS AND SYSTEM DAMPING |
ANSI S2.9 : 2008 : R2013
|
PARAMETERS FOR SPECIFYING DAMPING PROPERTIES OF MATERIALS AND SYSTEM DAMPING |
DIN EN 12354-5:2009-10
|
Building acoustics - Estimation of acoustic performance of building from the performance of elements - Part 5: Sounds levels due to the service equipment |
ISO 10846-3:2002
|
Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion |
I.S. EN ISO 10846-2:2008
|
ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBROACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 2: DIRECT METHOD FOR DETERMINATION OF THE DYNAMIC STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION |
BS ISO 18437-4:2008
|
Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials Dynamic stiffness method |
DD ENV 13481-6:2002
|
Railway applications. Track. Performance requirements for fastening systems Special fastening systems for attenuation of vibration |
MIL-DTL-19863 Revision E:2018
|
Mount, Resilient: Type 5B5,000H |
DIN EN ISO 10846-5:2009-07
|
ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 5: DRIVING POINT METHOD FOR DETERMINATION OF THE LOW-FREQUENCY TRANSFER STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION |
ISO 2017-3:2015
|
Mechanical vibration and shock — Resilient mounting systems — Part 3: Technical information to be exchanged for application of vibration isolation to new buildings |
I.S. EN ISO 10846-5:2009
|
ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBROACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 5: DRIVING POINT METHOD FOR DETERMINATION OF THE LOW-FREQUENCY TRANSFER STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION |
ISO 18437-4:2008
|
Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 4: Dynamic stiffness method |
ISO 2017-1:2005
|
Mechanical vibration and shock — Resilient mounting systems — Part 1: Technical information to be exchanged for the application of isolation systems |
ISO 10846-2:2008
|
Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion |
ENV 13481-6 : DRAFT 2002 COR 04
|
RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 6: SPECIAL FASTENING SYSTEMS FOR ATTENUATION OF VIBRATION |
UNI EN ISO 10846-5 : 2009
|
ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 5: DRIVING POINT METHOD FOR DETERMINATION OF THE LOW-FREQUENCY TRANSFER STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION |
UNI EN ISO 10846-2 : 2008
|
ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 2: DIRECT METHOD FOR DETERMINATION OF THE DYNAMIC STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION |
UNI EN 12354-5 : 2009
|
BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDING FROM THE PERFORMANCE OF ELEMENTS - PART 5: SOUNDS LEVELS DUE TO THE SERVICE EQUIPMENT |
BS EN ISO 10846-5:2009
|
Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion |
03/306100 DC : DRAFT APR 2003
|
ISO 18437-3 - MECHANICAL VIBRATION AND SHOCK - CHARACTERIZATION OF THE DYNAMIC MECHANICAL PROPERTIES OF RESILIENT MATERIALS - PART 3: SINGLE CANTILEVER BEAM METHOD |
BS ISO 18437-5:2011
|
Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials Poisson ratio based on comparison between measurements and finite element analysis |
03/305847 DC : DRAFT APR 2003
|
ISO 18437-2 - MECHANICAL VIBRATION AND SHOCK - CHARACTERISATION OF THE DYNAMIC MECHANICAL PROPERTIES OF RESILIENT MATERIALS - PART 2: RESONANCE METHOD |
BS EN 16730:2016
|
Railway applications. Track. Concrete sleepers and bearers with under sleeper pads |
DIN EN 16730:2016-09
|
RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS WITH UNDER SLEEPER PADS |
BS EN 13146-9 : 2009
|
RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 9: DETERMINATION OF STIFFNESS |
MIL-DTL-21649 Revision D:2017
|
MOUNT, RESILIENT, TYPE 5M10,000-H |
07/30147100 DC : 0
|
ISO 18437-4 - MECHANICAL VIBRATION AND SHOCK - CHARACTERIZATION OF THE DYNAMIC MECHANICAL PROPERTIES OF VISCO-ELASTIC MATERIALS - PART 4: DYNAMIC STIFFNESS METHOD |
05/30103114 DC : DRAFT NOV 2005
|
ISO 10846-2 - ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 2: DYNAMIC STIFFNESS OF ELASTIC SUPPORTS FOR TRANSLATORY MOTION - DIRECT METHOD |
ISO 18437-3:2005
|
Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 3: Cantilever shear beam method |
I.S. EN 13146-9:2009
|
RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 9: DETERMINATION OF STIFFNESS |
DIN EN ISO 10846-4:2004-02
|
Acoustics and vibration - Laboratory measurement of the vibro-acoustic transfer properties of resilient elements - Part 4: Dynamic stiffness of elements other than elastic supports for translatory motion (ISO 10846-4:2003); German version EN ISO 10846-4:2003 |
ISO 10846-5:2008
|
Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion |
ISO 10846-4:2003
|
Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion |
BS EN 12354-5:2009
|
Building acoustics. Estimation of acoustic performance of building from the performance of elements Sounds levels due to the service equipment |
ISO 9241-6:1999
|
Ergonomic requirements for office work with visual display terminals (VDTs) Part 6: Guidance on the work environment |
EN 13146-9:2009+A1:2011
|
Railway applications - Track - Test methods for fastening systems - Part 9: Determination of stiffness |
EN ISO 10846-3 : 2002
|
ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 3: INDIRECT METHOD FOR DETERMINATION OF THE DYNAMIC STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION |
EN ISO 10846-4 : 2003
|
ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 4: DYNAMIC STIFFNESS OF ELEMENTS OTHER THAN RESILIENT SUPPORTS FOR TRANSLATORY MOTION (ISO 10846-4:2003) |
EN ISO 9241-6:1999
|
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 6: Guidance on the work environment (ISO 9241-6:1999) |
EN ISO 10846-5:2009
|
Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion (ISO 10846-5:2008) |
EN ISO 10846-2:2008
|
Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion (ISO 10846-2:2008) |
EN 16730:2016
|
Railway applications - Track - Concrete sleepers and bearers with under sleeper pads |
UNE-EN 16730:2017
|
Railway applications - Track - Concrete sleepers and bearers with under sleeper pads |
DIN EN 16730 E : 2016
|
RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS WITH UNDER SLEEPER PADS |
I.S. EN 16730:2016
|
RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS WITH UNDER SLEEPER PADS |
I.S. ENV 13481-6:2002
|
RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 6: SPECIAL FASTENING SYSTEMS FOR ATTENUATION OF VIBRATION |
DIN EN ISO 10846-2:2008-11
|
ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 2: DIRECT METHOD FOR DETERMINATION OF THE DYNAMIC STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION |
BS EN ISO 10846-3:2002
|
Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion |