Skip to content
Please enter a keyword to search

  • ISO 11204:2010

    Current The latest, up-to-date edition.

    Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s):  English, French

    Published date:  06-05-2010

    Publisher:  International Organization for Standardization

    Add To Cart

    Abstract - (Show below) - (Hide below)

    ISO 11204:2010 specifies a method for determining the emission sound pressure levels of machinery or equipment, at a work station and at other specified positions nearby, in any environment which meets certain qualification requirements. A work station is occupied by an operator and may be located in open space, in the room where the source under test operates, in a cab fixed to the source under test, or in an enclosure remote from the source under test. One or more specified positions may be located in the vicinity of a work station, or in the vicinity of an attended or unattended machine. Such positions are sometimes referred to as bystander positions.

    Emission sound pressure levels are determined as A-weighted levels. Additionally, levels in frequency bands and C-weighted peak emission sound pressure levels can be determined in accordance with ISO 11204:2010, if required.

    A method is given for determining a local environmental correction (subject to a specified limiting maximum value) to be applied to the measured sound pressure levels to exclude the effects of reflections from reflecting surfaces other than the plane on which the source under test is placed. This correction is based upon the mean sound pressure level on a measurement surface, the sound pressure level measured at a specified position, and either an environmental correction or the equivalent absorption area of the test room.

    With the method specified in ISO 11204:2010 results of accuracy grade 2 (engineering grade) or accuracy grade 3 (survey grade) are obtained. Corrections are applied for background noise and, as described above, for the acoustic environment. Instructions are given for the mounting and operation of the source under test and for the choice of microphone positions for the work station and for other specified positions. One purpose of the measurements is to permit comparison of the performance of different units of a given family of machines, under defined environmental conditions and standardized mounting and operating conditions.

    The method specified in ISO 11204:2010 is suitable for all types of noise (steady, non-steady, fluctuating, isolated bursts of sound energy, etc.) defined in ISO 12001.

    The method specified in ISO 11204:2010 is applicable to all types and sizes of noise sources.

    The type of test environment influences the accuracy of the determination of emission sound pressure levels. ISO 11204:2010 is applicable to an indoor or outdoor environment with one or more reflecting planes present, meeting specified requirements. These requirements on the room are less strict than those of ISO 11201, in particular regarding the acoustical quality of the environment.

    ISO 11204:2010 is applicable to work stations and other specified positions where emission sound pressure levels are to be determined.

    Appropriate positions where measurements may be made include the following: a) work station located in the vicinity of the source under test; this is the case for many industrial machines and domestic appliances; b) work station within a cab which is an integral part of the source under test; this is the case for many industrial trucks and earth-moving machines; c) work station within a partial or total enclosure (or behind a screen) supplied by the manufacturer as an integral part of the source under test; d) work station partially or totally enclosed by the source under test this situation may be encountered with some large industrial machines; e) bystander positions occupied by individuals not responsible for the operation of the source under test, but who may be in its immediate vicinity, either occasionally or continuously; f) other specified positions, not necessarily work stations or bystander positions.

    The work station may also lie on a specified path along which an operator moves.

    General Product Information - (Show below) - (Hide below)

    Development Note Supersedes ISO/DIS 11204. (05/2010)
    Document Type Standard
    Product Note THIS STANDARD IS ALSO HAVE Corrected version (fr) : 2011-12
    Publisher International Organization for Standardization
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    PREN 14175-3 : DRAFT 2017 FUME CUPBOARDS - PART 3: TYPE TEST METHODS
    BS EN 16564:2014 Machines and plants for mining and tooling of natural stone. Safety. Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions
    DIN EN 15571:2015-03 Machines and plants for mining and tooling of natural stone - Safety - Requirements for surface finishing machines
    DIN EN 16252:2013-03 Machines for compacting waste materials or recyclable fractions - Horizontal baling presses - Safety requirements
    ISO/TR 18569:2004 Safety of machinery Guidelines for the understanding and use of safety of machinery standards
    DIN EN ISO 16093:2014-03 (Draft) MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL (ISO 16093:2017)
    I.S. EN 691-1:2012 SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS
    16/30337092 DC BS EN 13378. Pasta processing plant. Pasta presses. Safety and hygiene requirements
    DIN EN 16564 E : 2015 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES, INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS
    12/30253910 DC : DRAFT JULY 2012 BS EN 1807-2 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - LOG SAWING MACHINES
    PREN 1870-3 : DRAFT 2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 3: DOWN CUTTING CROSS-CUT SAWS AND DUAL PURPOSE DOWN CUTTING CROSS-CUT SAWS/CIRCULAR SAW BENCHES
    15/30329716 DC BS EN 13289. Pasta processing plants. Dryers and coolers. Safety and hygiene requirements
    DIN EN 16564:2015-04 Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions
    DIN EN 415-10:2014-07 SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
    I.S. EN ISO 11553-3:2013 SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 3: NOISE REDUCTION AND NOISE MEASUREMENT METHODS FOR LASER PROCESSING MACHINES AND HAND-HELD PROCESSING DEVICES AND ASSOCIATED AUXILIARY EQUIPMENT (ACCURACY GRADE 2) (ISO 11553-3:2013)
    EN ISO 11202:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010)
    I.S. EN 14070:2003 SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES
    11/30237569 DC : 0 BS EN 1870-19 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS
    BS EN 16252:2012 Machines for compacting waste materials or recyclable fractions. Horizontal baling presses. Safety requirements
    DIN EN 15166:2010-02 Food processing machinery - Automatic back splitting machines of butchery carcasses - Safety and hygiene requirements
    DIN EN ISO 11553-3:2013-07 SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 3: NOISE REDUCTION AND NOISE MEASUREMENT METHODS FOR LASER PROCESSING MACHINES AND HAND-HELD PROCESSING DEVICES AND ASSOCIATED AUXILIARY EQUIPMENT (ACCURACY GRADE 2) (ISO 11553-3:2013)
    05/30130669 DC : DRAFT MAR 2005 BS EN 15165 - FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    BS EN 15467:2014 Food processing machinery. Fish heading and filleting machines. Safety and hygiene requirements
    11/30249223 DC : 0 BS EN 50570 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC TUMBLE DRYERS
    I.S. EN 415-9:2009 SAFETY OF PACKAGING MACHINES - PART 9: NOISE MEASUREMENT METHODS FOR PACKAGING MACHINES, PACKAGING LINES AND ASSOCIATED EQUIPMENT, GRADE OF ACCURACY 2 AND 3
    09/30197984 DC : 0 BS EN 1807-2 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 2: LOG SAWING MACHINES
    PREN ISO 11200 : DRAFT 2012 ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS (ISO/DIS 11200:2012)
    BS EN 13035-11 : 2006 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 11: DRILLING MACHINES
    BS ISO 230-5:2000 Test code for machine tools Determination of the noise emission
    DIN EN 1807-1:2013-06 Safety of woodworking machines - Band sawing machines - Part 1: Table band saws and band re-saws
    DIN EN 15467:2015-03 FOOD PROCESSING MACHINERY - FISH HEADING AND FILLETING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    EEMUA 140 : 2014 NOISE PROCEDURE SPECIFICATION
    DIN EN 16486:2014-10 MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS
    I.S. EN 415-10:2014 SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
    I.S. EN ISO 18217:2015 SAFETY OF WOODWORKING MACHINES - EDGE-BANDING MACHINES FED BY CHAIN(S) (ISO 18217:2015)
    PREN 1870-12 : DRAFT 2011 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 12: PENDULUM CROSS-CUT SAWING MACHINES
    I.S. EN 1807-2:2013 SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 2: LOG SAWING MACHINES
    I.S. EN 16564:2014 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES, INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS
    I.S. EN 15571:2014 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES
    I.S. EN 16500:2014 MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS
    UNE-EN 14985:2012 Cranes - Slewing jib cranes
    UNI EN 15180 : 2014 FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS
    16/30322398 DC : 0 BS EN 1612 - PLASTICS AND RUBBER MACHINES - REACTION MOULDING MACHINES AND PLANTS - SAFETY REQUIREMENTS
    UNE-EN 16500:2015 Machines for compacting waste materials or recyclable fractions - Vertical baling presses - Safety requirements
    NF EN ISO 19085-1 : 2017 WOODWORKING MACHINES - SAFETY - PART 1: COMMON REQUIREMENTS
    UNE-EN ISO 19085-1:2018 Woodworking machines - Safety - Part 1: Common requirements (ISO 19085-1:2017)
    16/30314039 DC : 0 BS EN 12301 - PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS
    ANSI/ASA S12.56/ISO 3746 : 2011(R2016) ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - SURVEY METHOD USING AN ENVELOPING MEASUREMENT SURFACE OVER A REFLECTING PLANE
    EN ISO 4254-1:2015 Agricultural machinery - Safety - Part 1: General requirements (ISO 4254-1:2013)
    I.S. EN 1114-3:2001 RUBBER AND PLASTICS MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS
    DIN EN 12409:2011-12 Plastics and rubber machines - Thermoforming machines - Safety requirements
    DIN EN 13379:2016-06 (Draft) PASTA PROCESSING PLANTS - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR, STICK MAGAZINE - SAFETY AND HYGIENE REQUIREMENTS
    DIN EN 415-7:2009-12 Safety of packaging machines - Part 7: Group and secondary packaging machines (includes Amendment A1:2008)
    DIN EN 14985 E : 2012 CRANES - SLEWING JIB CRANES
    DIN EN 415-5:2010-04 Safety of packaging machines - Part 5: Wrapping machines (includes Amendment A1:2009)
    DIN EN ISO 9902-4 E : 2001 TEXTILE MACHINERY - NOISE TEST CODE - PART 4: YARN PROCESSING, CORDAGE AND ROPE MANUFACTURING MACHINERY (ISO 9902-4:2001 + AMD 1:2009 + AMD 2:2014)
    DIN EN 13525:2010-05 FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY
    DIN EN 13378:2016-05 (Draft) PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS
    DIN EN 1870-7:2013-01 Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading
    DIN EN 1870-12:2014-03 Safety of woodworking machines - Circular sawing machines - Part 12: Pendulum cross-cut sawing machines
    DIN EN 1870-16:2013-01 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V CUTTING
    DIN EN ISO 9902-1 E : 2001 TEXTILE MACHINERY - NOISE TEST CODE - PART 1: COMMON REQUIREMENTS (ISO 9902-1:2001 + AMD 1:2009 + AMD 2:2014)
    DIN EN 12012-3:2010-02 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 3: SAFETY REQUIREMENTS FOR SHREDDERS
    DIN EN ISO 11200:2014-10 ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS (ISO 11200:2014)
    DIN EN 1870-9:2013-01 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 9: DOUBLE BLADE CIRCULAR SAWING MACHINES FOR CROSS-CUTTING WITH INTEGRATED FEED AND WITH MANUAL LOADING AND/OR UNLOADING
    DIN EN 13418:2013-08 PLASTICS AND RUBBER MACHINES - WINDING MACHINES FOR FILM OR SHEET - SAFETY REQUIREMENTS
    DIN EN 1870-3:2015-02 Safety of woodworking machines - Circular sawing machines - Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches
    I.S. EN 861:2007 SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES
    BS EN 13035-3 : 2003 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 3: CUTTING MACHINES
    UNE-EN ISO 11200:2014 Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions (ISO 11200:2014)
    BS EN 13042-3 : 2007 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 3: IS MACHINES
    UNE-EN 1870-4:2012 Safety of woodworking machines - Circular sawing machines - Part 4: Multiblade rip sawing machines with manual loading and/or unloading
    ONORM EN 1218-1 : 2010 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 1: SINGLE END TENONING MACHINES WITH SLIDING TABLE
    UNE-EN 13977:2012 Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance
    BS EN 12855 : 2003 FOOD PROCESSING MACHINERY - ROTATING BOWL CUTTERS - SAFETY AND HYGIENE REQUIREMENTS
    BS EN 12111:2014 Tunnelling machines. Road headers and continuous miners. Safety requirements
    UNE-EN 1870-7:2013 Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading
    BS EN 859 : 2007 SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANING MACHINES
    ISO 3746:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane
    UNE-EN ISO 11205:2010 Acoustics - Noise emitted by machinery and equipment - Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity (ISO 11205:2003)
    PD ISO/TR 18569:2004 Safety of machinery. Guidelines for the understanding and use of safety of machinery standards.
    ISO 11203:1995 Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level
    BS EN 13418:2013 Plastics and rubber machines. Winding machines for film or sheet. Safety requirements
    ISO 11205:2003 Acoustics — Noise emitted by machinery and equipment — Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity
    BS EN 1870-9:2012 Safety of woodworking machines. Circular sawing machines Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading
    BS EN ISO 11201:2010 Acoustics. Noise emitted by machinery and equipment. Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
    BS EN 14462:2015 Surface treatment equipment. Noise test code for surface treatment equipment including its ancillary handling equipment. Accuracy grades 2 and 3
    BS EN 1870-15:2012 Safety of woodworking machines. Circular sawing machines Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading
    BS EN ISO 11690-2:1997 Acoustics. Recommended practice for the design of low-noise workplaces containing machinery Noise control measures
    ISO 9902-3:2001 Textile machinery — Noise test code — Part 3: Nonwoven machinery
    DIN EN 13042-1:2010-04 Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 1: Gob feeder (includes Amendment A1:2009)
    BS EN 12409 : 2008 PLASTICS AND RUBBER MACHINES - THERMOFORMING MACHINES - SAFETY REQUIREMENTS
    BS EN 13218 : 2002 MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES
    BS EN 1870-10:2013 Safety of woodworking machines. Circular sawing machines Single blade automatic and semi-automatic up-cutting cross-cut sawing machines
    BS EN 13378 : 2001 PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS
    BS EN ISO 9902-3 : 2001 TEXTILE MACHINERY - NOISE TEST CODE - PART 3: NONWOVEN MACHINERY
    14/30244780 DC : 0 BS ISO 19859 - GAS TURBINE APPLICATIONS - REQUIREMENTS FOR POWER GENERATION
    BS EN 13861:2011 Safety of machinery. Guidance for the application of ergonomics standards in the design of machinery
    BS EN 15067:2007 Plastics and rubber machines. Film converting machines for bags and sacks. Safety requirements
    BS EN ISO 4254-1:2015 Agricultural machinery. Safety General requirements
    I.S. EN 13871:2014 FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS
    UNI EN 1218-5 : 2010 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 5: ONE SIDE PROFILING MACHINES WITH FIXED TABLE AND FEED ROLLERS OR FEED CHAIN
    I.S. EN 13977:2011 RAILWAY APPLICATIONS - TRACK - SAFETY REQUIREMENTS FOR PORTABLE MACHINES AND TROLLEYS FOR CONSTRUCTION AND MAINTENANCE
    EN 12463:2014 Food processing machinery - Filling machines and auxiliary machines - Safety and hygiene requirements
    I.S. EN 1870-16:2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V-CUTTING
    I.S. EN 13289:2001 PASTA PROCESSING PLANTS - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS
    I.S. EN ISO 4871:2009 ACOUSTICS - DECLARATION AND VERIFICATION OF NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT
    EN 12545:2000+A1:2009 Footwear, leather and imitation leather goods manufacturing machines - Noise test code - Common requirements
    EN 1265:1999+A1:2008 Safety of machinery - Noise test code for foundry machines and equipment
    EN 13418:2013 Plastics and rubber machines - Winding machines for film or sheet - Safety requirements
    EN 1114-1:2011 Plastics and rubber machines - Extruders and extrusion lines - Part 1: Safety requirements for extruders
    EN 13023:2003+A1:2010 Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment - Accuracy grades 2 and 3
    DIN EN 15067:2008-03 Plastics and rubber machines - Film converting machines for bags and sacks - Safety requirements
    EN ISO 23125:2015 Machine tools - Safety - Turning machines (ISO 23125:2015, Corrected version 2016-03-15)
    EN 12012-4:2006+A1:2008 Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for agglomerators
    DIN EN 14070:2009-07 SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES
    EN 13379:2001+A1:2013 Pasta processing plants - Spreader, stripping and cutting machine, stick return conveyor, stick magazine - Safety and hygiene requirements
    DIN EN ISO 9902-1:2001-07 TEXTILE MACHINERY - NOISE TEST CODE - PART 1: COMMON REQUIREMENTS (ISO 9902-1:2001 + AMD 1:2009 + AMD 2:2014)
    DIN ISO 230-5:2006-03 Test code for machine tools - Part 5: Determination of the noise emission (ISO 230-5:2000)
    EN 13112:2002+A1:2009 Tannery machines - Splitting and bandknife shearing machines - Safety requirements
    DIN EN ISO 9902-2:2001-07 TEXTILE MACHINERY - NOISE TEST CODE - PART 2: SPINNING PREPARATORY AND SPINNING MACHINERY (ISO 9902-2:2001 + AMD 1:2009 + AMD 2:2014)
    DIN EN 1114-3:2010-01 PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS
    DIN EN 1114-2:2010-01 PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 2: SAFETY REQUIREMENTS FOR DIE FACE PELLETISERS
    EN 1218-3:2001+A1:2009 Safety of woodworking machines - Tenoning machines - Part 3: Hand fed tenoning machines with sliding table for cutting structural timbers
    EN 13534:2006+A1:2010 Food processing machinery - Curing injection machines - Safety and hygiene requirements
    EN 13035-7:2006+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 7: Cutting machines for laminated glass
    DIN EN ISO 21649:2010-01 Needle-free injectors for medical use - Requirements and test methods (ISO 21649:2006)
    EN 13378:2001+A1:2013 Pasta processing plants - Pasta presses - Safety and hygiene requirements
    EN 12267:2003+A1:2010 Food processing machinery - Circular saw machines - Safety and hygiene requirements
    EN 13114:2002+A1:2009 Tannery machines - Rotating process vessels - Safety requirements
    EN 12409:2008+A1:2011 Plastics and rubber machines - Thermoforming machines - Safety requirements
    EN 1807-1:2013 Safety of woodworking machines - Band sawing machines - Part 1: Table band saws and band re-saws
    EN 12268:2014 Food processing machinery - Band saw machines - Safety and hygiene requirements
    UNI EN 12463 : 2014 FOOD PROCESSING MACHINERY - FILLING MACHINES AND AUXILIARY MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    DIN EN ISO 4871:2009-11 Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)
    EN 13035-6:2006+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 6: Machines for break-out
    EN 1114-2:1998+A1:2008 Plastics and rubber machines - Extruders and extrusion lines - Part 2: Safety requirements for die face pelletisers
    EN 13113:2002+A1:2010 Tannery machines - Roller coating machines - Safety requirements
    EN 13289:2001+A1:2013 Pasta processing plants - Dryers and coolers - Safety and hygiene requirements
    EN 1218-4:2004+A2:2009 Safety of woodworking machines - Tenoning machines - Part 4: Edge banding machines fed by chain(s)
    EN 13035-9:2006+A1:2010 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 9: Washing installations
    EN 13042-1:2007+A1:2009 Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 1: Gob feeder
    EN 13042-3:2007+A1:2009 Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 3: IS machines
    EN 12012-3:2001+A1:2008 Plastics and rubber machines - Size reduction machines - Part 3: Safety requirements for shredders
    EN 12855:2003+A1:2010 Food processing machinery - Rotating bowl cutters - Safety and hygiene requirements
    EN 12012-2:2001+A2:2008 Plastics and rubber machines - Size reduction machines - Part 2: Safety requirements for strand pelletisers
    UNI EN 1218-1 : 2009 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 1: SINGLE END TENONING MACHINES WITH SLIDING TABLE
    NF EN ISO 21649 : 2009 NEEDLE-FREE INJECTORS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS
    15/30302620 DC : 0 BS EN ISO 19085-4 - WOODWORKING MACHINES - SAFETY - PART 4: VERTICAL PANEL CIRCULAR SAWING MACHINES
    I.S. EN 16252:2012 MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - HORIZONTAL BALING PRESSES - SAFETY REQUIREMENTS
    12/30265270 DC : 0 BS EN 1870-6 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIREWOOD AND DUAL PURPOSE CIRCULAR SAWING MACHINES FOR FIREWOOD/CIRCULAR SAW BENCHES, WITH MANUAL LOADING AND/OR UNLOADING
    11/30237566 DC : 0 BS EN 1870-18 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS
    11/30247811 DC : 0 BS EN 415-10 - SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
    BS EN 415-9:2009 Safety of packaging machines Noise measurement methods for packaging machines, packaging lines and associated equipment, grade of accuracy 2 and 3
    UNE-EN 1870-13:2008 Safety of woodworking machines - Circular sawing machines - Part 13: Horizontal beam panel sawing machines
    15/30326831 DC : 0 BS EN 1114-3 - PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS
    11/30249083 DC : 0 BS EN 60335-2-58:2005/FP - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-58: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC DISHWASHING MACHINES
    BS EN 1870-19:2013 Safety of woodworking machines. Circular sawing machines Circular saw benches (with and without sliding table) and building site saws
    UNE-EN ISO 16093:2017 Machine tools - Safety - Sawing machines for cold metal (ISO 16093:2017)
    UNI EN 1870-19 : 2014 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS
    UNI EN 16500 : 2014 MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS
    CSA M4254.1 : 2007 AGRICULTURAL MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
    12/30273148 DC : 0 BS EN 15467 - FOOD PROCESSING MACHINERY - FISH HEADING AND FILLETING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    EN 1218-5:2004+A1:2009 Safety of woodworking machines - Tenoning machines - Part 5: One side profiling machines with fixed table and feed rollers or feed chain
    DIN EN 16486 E : 2014 MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS
    12/30260942 DC : 0 BS EN 13871 - FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS
    PREN 1672-1 : DRAFT 2012 FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS
    04/30106849 DC : DRAFT MAY 2004 EN 1870-1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS
    UNI EN 13035-11 : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 11: DRILLING MACHINES
    DIN EN ISO 11201:2010-10 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010)
    BS 7140:1995 Airborne noise emitted by woodworking machine tools. Operating conditions for woodworking machines
    14/30274816 DC : 0 BS EN ISO 16089 - MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES
    DIN EN ISO 16089 E : 2016 MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES (ISO 16089:2015)
    BS EN 16500:2014 Machines for compacting waste materials or recyclable fractions. Vertical baling presses. Safety requirements
    PREN 1114-3 : DRAFT 2015 PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS
    11/30237557 DC : 0 BS EN 1870-11 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI-AUTOMATIC AND AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
    12/30232434 DC : 0 BS EN 1870-5:2002+A1:2009 AMD 2 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAWBENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES
    DIN EN 1807-2:2013-06 Safety of woodworking machines - Band sawing machines - Part 2: Log sawing machines; German version EN 1807-2:2013
    12/30259421 DC : 0 BS EN 1672-1 - FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS
    12/30255086 DC : 0 BS EN 289 - PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS
    BS EN ISO 8230-1:2008 Safety requirements for dry-cleaning machines Common safety requirements
    UNE-EN 691-1:2013 Safety of woodworking machines - Part 1: Common requirements
    PREN 1870-11 : DRAFT 2011 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI-AUTOMATIC AND AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
    UNI EN ISO 10821 : 2010 INDUSTRIAL SEWING MACHINES - SAFETY REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS
    12/30259995 DC : 0 BS EN 12463 - FOOD PROCESSING MACHINERY - FILLING MACHINES AND AUXILIARY MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    PREN 12012-1 : DRAFT 2015 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS AND SHREDDERS
    12/30270038 DC : 0 BS EN 16500 - MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS
    09/30181664 DC : 0 BS EN 13035-4:2003/A1 - MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 4: TILTING TABLES
    BS EN 16486:2014 Machines for compacting waste materials or recyclable fractions. Compactors. Safety requirements
    PREN 14462 : DRAFT 2012 SURFACE TREATMENT EQUIPMENT - NOISE TEST CODE FOR SURFACE TREATMENT EQUIPMENT INCLUDING ITS ANCILLARY HANDLING EQUIPMENT - ACCURACY GRADES 2 AND 3
    BS EN 13035-7 : 2006 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 7: CUTTING MACHINES FOR LAMINATED GLASS
    UNI EN 12012-4 : 2008 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 4: SAFETY REQUIREMENTS FOR AGGLOMERATORS
    04/301783 DC : DRAFT JAN 2004 EN 848-3 - SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 3: NUMERICALLY CONTROLLED (NC) BORING MACHINES AND ROUTING MACHINES
    BS EN 1672-1:2014 Food processing machinery. Basic concepts Safety requirements
    I.S. EN 16486:2014 MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS
    DIN EN 13035-7:2010-07 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 7: Cutting machines for laminated glass (includes Amendment A1:2009)
    UNI EN 16252 : 2013 MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - HORIZONTAL BALING PRESSES - SAFETY REQUIREMENTS
    UNI EN 16486 : 2014 MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS
    DIN EN ISO 18217 E : 2015 SAFETY OF WOODWORKING MACHINES - EDGEBANDING MACHINES FED BY CHAIN(S) (ISO 18217:2015)
    PREN 1870-6 : DRAFT 2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIREWOOD AND DUAL PURPOSE CIRCULAR SAWING MACHINES FOR FIREWOOD/CIRCULAR SAW BENCHES, WITH MANUAL LOADING AND/OR UNLOADING
    UNI EN 15165 : 2014 FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    I.S. EN ISO 3740:2000 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - GUIDELINES FOR THE USE OF BASIC STANDARDS
    I.S. EN 15163:2017 MACHINES AND INSTALLATIONS FOR THE EXPLOITATION AND PROCESSING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR DIAMOND WIRE SAWS
    I.S. EN 15180:2014 FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS
    BS EN 50416 : 2005 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC CONVEYOR DISHWASHING MACHINES
    EN 14175-3:2003 FUME CUPBOARDS - PART 3: TYPE TEST METHODS
    PREN 1974 : DRAFT 2016 FOOD PROCESSING MACHINERY - SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    ISO 230-5:2000 Test code for machine tools Part 5: Determination of the noise emission
    I.S. EN ISO 16093:2017 MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL (ISO 16093:2017)
    UNI EN 415-9 : 2010 SAFETY OF PACKAGING MACHINES - PART 9: NOISE MEASUREMENT METHODS FOR PACKAGING MACHINES, PACKAGING LINES AND ASSOCIATED EQUIPMENT, GRADE OF ACCURACY 2 AND 3
    EN ISO 16090-1:2018 Machine tools safety - Machining centres, Milling machines, Transfer machines - Part 1: Safety requirements (ISO 16090-1:2017)
    17/30354108 DC : 0 BS EN 17106-1 - ROAD OPERATION MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
    PREN 289 : DRAFT 2012 PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS
    UNI EN 12012-1 : 2008 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS
    EN ISO 3740:2000 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - GUIDELINES FOR THE USE OF BASIC STANDARDS
    EN 12013:2018 Plastics and rubber machines - Internal mixers - Safety requirements
    BS EN ISO 3740:2001 Acoustics. Determination of sound power levels of noise sources. Guidelines for the use of basic standards
    EN ISO 3746:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010)
    I.S. EN ISO 8230-1:2008 SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS
    ONORM EN 1218-5 : 2010 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 5: ONE SIDE PROFILING MACHINES WITH FIXED TABLE AND FEED ROLLERS OR FEED CHAIN
    DIN EN 12267:2011-02 Food processing machinery - Circular saw machines - Safety and hygiene requirements (includes Amendment A1:2010)
    DIN EN 12268:2015-01 FOOD PROCESSING MACHINERY - BAND SAW MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    DIN EN 13114:2010-03 Tannery machines - Rotating process vessels - Safety requirements (includes Amendment A1:2009)
    DIN EN 1807:2010-02 SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES
    DIN EN 1870-14:2012-06 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 14: VERTICAL PANEL SAWING MACHINES
    DIN EN 13112:2011-03 Tannery machines - Splitting and bandknife shearing machines - Safety requirements (includes Amendment A1:2009)
    DIN EN ISO 9902-7 E : 2001 TEXTILE MACHINERY - NOISE TEST CODE - PART 7: DYEING AND FINISHING MACHINERY (ISO 9902-7:2001 + AMD 1:2009 + AMD 2:2014)
    DIN EN 12463:2015-02 Food processing machinery - Filling machines and auxiliary machines - Safety and hygiene requirements
    DIN EN 12301:2015-12 (Draft) PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS
    DIN EN 12855:2011-02 Food processing machinery - Rotating bowl cutters - Safety and hygiene requirements (includes Amendment A1:2010)
    DIN EN 12331:2015-12 Food processing machinery - Mincing machines - Safety and hygiene requirements
    DIN EN 1547:2010-02 Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment (includes Amendment A1:2009)
    DIN EN ISO 4254-1:2016-09 Agricultural machinery - Safety - Part 1: General requirements (ISO 4254-1:2013)
    DIN EN 1417:2015-03 Plastics and rubber machines - Two roll mills - Safety requirements; German version EN 1417:2014
    DIN EN 1870-13:2013-07 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES
    DIN EN 1265:2009-07 SAFETY OF MACHINERY - NOISE TEST CODE FOR FOUNDRY MACHINES AND EQUIPMENT
    DIN EN 1870-10:2013-07 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES
    DIN EN 1870-8:2013-03 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 8: SINGLE BLADE EDGING CIRCULAR RIP SAWING MACHINES WITH POWER DRIVEN SAW UNIT AND MANUAL LOADING AND/OR UNLOADING
    DIN EN 1218-1:2010-02 Safety of woodworking machines - Tenoning machines - Part 1: Single end tenoning machines with sliding table (includes Amendment A1:2009)
    DIN EN ISO 9902-3 E : 2001 TEXTILE MACHINERY - NOISE TEST CODE - PART 3: NONWOVEN MACHINERY (ISO 9902-3:2001 + AMD 1:2009 + AMD 2:2014)
    DIN EN 14462 E : 2015 SURFACE TREATMENT EQUIPMENT - NOISE TEST CODE FOR SURFACE TREATMENT EQUIPMENT INCLUDING ITS ANCILLARY HANDLING EQUIPMENT - ACCURACY GRADES 2 AND 3
    DIN EN 12001:2012-11 CONVEYING, SPRAYING AND PLACING MACHINES FOR CONCRETE AND MORTAR - SAFETY REQUIREMENTS
    DIN EN 13042-1 E : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 1: GOB FEEDER
    DIN EN 13035-4:2010-07 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 4: Tilting tables (includes Amendment A1:2009)
    DIN EN 13042-5 E : 2009 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS -SAFETY REQUIREMENTS - PART 5: PRESSES
    DIN EN ISO 9902-5:2014-10 TEXTILE MACHINERY - NOISE TEST CODE - PART 5: WEAVING AND KNITTING PREPARATORY MACHINERY (ISO 9902-5:2001 + AMD 1:2009 + AMD 2:2014)
    DIN EN 13035-3:2010-02 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 3: CUTTING MACHINES
    DIN EN 13042-3:2010-05 Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 3: IS machines (includes Amendment A1:2009)
    DIN EN ISO 9902-3:2014-10 TEXTILE MACHINERY - NOISE TEST CODE - PART 3: NONWOVEN MACHINERY (ISO 9902-3:2001 + AMD 1:2009 + AMD 2:2014)
    DIN EN 15011:2014-09 Cranes - Bridge and gantry cranes (includes Amendment A1:2014)
    BS EN 1870-2:1999 Safety of woodworking machines. Circular sawing machines Horizontal beam panel saws and vertical panel saws
    UNE-EN 289:2014 Plastics and rubber machines - Compression moulding machines and transfer moulding machines - Safety requirements
    ISO 4871:1996 Acoustics — Declaration and verification of noise emission values of machinery and equipment
    BS EN 1870-7:2012 Safety of woodworking machines. Circular sawing machines Single blade log sawing machines with integrated feed table and manual loading and/or unloading
    BS EN ISO 9902-2 : 2001 TEXTILE MACHINERY - NOISE TEST CODE - PART 2: SPINNING PREPARATORY AND SPINNING MACHINERY
    UNE-EN 1870-10:2013 Safety of woodworking machines - Circular sawing machines - Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines
    BS EN 13379 : 2001 PASTA PROCESSING PLANTS - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR, STICK MAGAZINE - SAFETY AND HYGIENE REQUIREMENTS
    BS EN ISO 11546-1:1996 Acoustics. Determination of sound insulation performances of enclosures Measurements under laboratory conditions (for declaration purposes)
    ISO 11689:1996 Acoustics — Procedure for the comparison of noise-emission data for machinery and equipment
    ISO 19859:2016 Gas turbine applications Requirements for power generation
    BS EN 13534 : 2006 FOOD PROCESSING MACHINERY - CURING INJECTION MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    DIN EN 13042-2:2009-12 Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 2: Handling machines for feeding (includes Amendment A1:2009)
    UNE-EN 13418:2013 Plastics and rubber machines - Winding machines for film or sheet - Safety requirements
    I.S. EN 1870-8:2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 8: SINGLE BLADE EDGING CIRCULAR RIP SAWING MACHINES WITH POWER DRIVEN SAW UNIT AND MANUAL LOADING AND/OR UNLOADING
    I.S. EN 13114:2002 TANNERY MACHINES - ROTATING PROCESS VESSELS - SAFETY REQUIREMENTS
    DIN EN 1218-4:2009-12 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 4: EDGE BANDING MACHINES FED BY CHAIN(S)
    I.S. EN 289:2014 PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS
    I.S. EN 13042-2:2004 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 2: HANDLING MACHINES FOR FEEDING
    DIN EN 12012-2:2010-02 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 2: SAFETY REQUIREMENTS FOR STRAND PELLETISERS
    I.S. EN 13035-9:2006 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 9: WASHING INSTALLATIONS
    I.S. EN ISO 12001:2009 ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - RULES FOR THE DRAFTING AND PRESENTATION OF A NOISE TEST CODE
    I.S. EN ISO 21649:2009 NEEDLE-FREE INJECTORS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS
    I.S. EN 1870-10:2013 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES
    I.S. EN 13379:2001 PASTA PROCESSING PLANTS - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR, STICK MAGAZINE - SAFETY AND HYGIENE REQUIREMENTS
    I.S. EN 12331:2015 FOOD PROCESSING MACHINERY - MINCING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    I.S. EN 13042-5:2003 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 5: PRESSES
    I.S. EN 1218-2:2004 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 2: DOUBLE END TENONING AND/OR PROFILING MACHINES FED BY CHAIN OR CHAINS
    I.S. EN 13113:2002 TANNERY MACHINES - ROLLER COATING MACHINES - SAFETY REQUIREMENTS
    I.S. EN 1870-11:2013 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
    I.S. EN 12855:2003 FOOD PROCESSING MACHINERY - ROTATING BOWL CUTTERS - SAFETY AND HYGIENE REQUIREMENTS
    DIN EN ISO 11200:1996-07 ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS (ISO 11200:2014)
    DIN EN 1218-3:2009-12 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 3: HAND FED TENONING MACHINES WITH SLIDING TABLE FOR CUTTING STRUCTURAL TIMBERS
    I.S. EN 1870-12:2013 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 12: PENDULUM CROSS-CUT SAWING MACHINES
    ONORM EN 16564 : 2015 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES, INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS
    I.S. EN 1870-9:2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 9: DOUBLE BLADE CIRCULAR SAWING MACHINES FOR CROSSCUTTING WITH INTEGRATED FEED AND WITH MANUAL LOADING AND/OR UNLOADING
    I.S. EN 13042-1:2007 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 1: GOB FEEDER
    I.S. EN 1870-3:2014 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 3: DOWN CUTTING CROSS-CUT SAWS AND DUAL PURPOSE DOWN CUTTING CROSS-CUT SAWS/CIRCULAR SAW BENCHES
    I.S. EN 13861:2011 SAFETY OF MACHINERY - GUIDANCE FOR THE APPLICATION OF ERGONOMICS STANDARDS IN THE DESIGN OF MACHINERY
    DIN EN 1870-1:1999-07 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS
    I.S. EN 13378:2001 PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS
    DIN EN 13218:2010-09 MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES
    EN 16564:2014 Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions
    I.S. EN 13035-4:2003 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 4: TILTING TABLES
    I.S. EN 13534:2006 FOOD PROCESSING MACHINERY - CURING INJECTION MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    I.S. EN 12750:2013 SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES
    I.S. EN 1265:2000 SAFETY OF MACHINERY - NOISE TEST CODE FOR FOUNDRY MACHINES AND EQUIPMENT
    I.S. EN 12409:2008 PLASTICS AND RUBBER MACHINES - THERMOFORMING MACHINES - SAFETY REQUIREMENTS
    I.S. EN ISO 9902-4:2001 TEXTILE MACHINERY - NOISE TEST CODE - PART 4: YARN PROCESSING, CORDAGE AND ROPE MANUFACTURING MACHINERY (ISO 9902-4:2001)
    I.S. EN 12629-1:2000 MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 1: COMMON REQUIREMENTS
    I.S. EN 13035-3:2003 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 3: CUTTING MACHINES
    I.S. EN 12111:2014 TUNNELLING MACHINES - ROAD HEADERS AND CONTINUOUS MINERS - SAFETY REQUIREMENTS
    I.S. EN 1870-15:2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 15: MULTIBLADE CROSS-CUT SAWING MACHINES WITH INTEGRATED FEED OF THE WORKPIECE AND MANUAL LOADING AND/OR UNLOADING
    I.S. EN 1870-17:2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
    I.S. EN 13418:2013 PLASTICS AND RUBBER MACHINES - WINDING MACHINES FOR FILM OR SHEET - SAFETY REQUIREMENTS
    I.S. EN 1114-1:2011 PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 1: SAFETY REQUIREMENTS FOR EXTRUDERS
    ONORM EN 15571 : 2015 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES
    DIN EN 1807:1999-10 SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES
    EN ISO 11690-1 : 1996 ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE WORKPLACES CONTAINING MACHINERY - NOISE CONTROL STRATEGIES
    DIN EN 13218:2002-09 MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES
    I.S. EN 12268:2014 FOOD PROCESSING MACHINERY - BAND SAW MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    I.S. EN 1218-5:2004 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 5: ONE SIDE PROFILING MACHINES WITH FIXED TABLE AND FEED ROLLERS OR FEED CHAIN
    I.S. EN ISO 1680:2013 ACOUSTICS - TEST CODE FOR THE MEASUREMENT OF AIRBORNE NOISE EMITTED BY ROTATING ELECTRICAL MACHINES (ISO 1680:2013)
    I.S. EN 1218-3:2002 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 3: HAND FED TENONING MACHINES WITH SLIDING TABLE FOR CUTTING STRUCTURAL TIMBERS
    I.S. EN 1547:2001 Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment
    I.S. EN 1870-14:2007 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 14: VERTICAL PANEL SAWING MACHINES
    I.S. EN ISO 11546-1:2009 ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCES OF ENCLOSURES - PART 1: MEASUREMENTS UNDER LABORATORY CONDITIONS (FOR DECLARATION PURPOSES)
    I.S. EN ISO 11546-2:2009 ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCES OF ENCLOSURES - PART 2: MEASUREMENTS IN SITU (FOR ACCEPTANCE AND VERIFICATION PURPOSES)
    EN 15011:2011+A1:2014 Cranes - Bridge and gantry cranes
    I.S. EN 12545:2000 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - NOISE TEST CODE - COMMON REQUIREMENTS
    I.S. EN 12012-3:2001 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 3: SAFETY REQUIREMENTS FOR SHREDDERS
    I.S. EN 13042-3:2007 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 3: IS MACHINES
    DIN EN 13289:2013-05 PASTA PROCESSING PLANTS - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS
    EN 15571:2014 Machines and plants for mining and tooling of natural stone - Safety - Requirements for surface finishing machines
    I.S. EN 1218-1:2000 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 1: SINGLE END TENONING MACHINES WITH SLIDING TABLE
    I.S. EN 12012-2:2001 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 2: SAFETY REQUIREMENTS FOR STRAND PELLETISERS
    I.S. EN 415-5:2006 SAFETY OF PACKAGING MACHINES - PART 5: WRAPPING MACHINES
    I.S. EN 1417:2014 PLASTICS AND RUBBER MACHINES - TWO-ROLL MILLS - SAFETY REQUIREMENTS
    EN ISO 9902-6:2001/A2:2014 TEXTILE MACHINERY - NOISE TEST CODE - PART 6: FABRIC MANUFACTURING MACHINERY (ISO 9902-6:2001/AMD 2:2014)
    DIN EN ISO 10821:2013-02 INDUSTRIAL SEWING MACHINES - SAFETY REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS (ISO 10821:2005 + AMD 1:2009)
    I.S. EN 1114-2:1998 PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 2: SAFETY REQUIREMENTS FOR DIE FACE PELLETISERS
    I.S. EN ISO 4254-1:2015 AGRICULTURAL MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS (ISO 4254-1:2013)
    DIN EN 13378:2013-05 PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS
    I.S. EN ISO 11205:2009 ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - ENGINEERING METHOD FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS IN SITU AT THE WORK STATION AND AT OTHER SPECIFIED POSITIONS USING SOUND INTENSITY
    DIN EN 13379:2013-05 PASTA PROCESSING PLANTS - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR, STICK MAGAZINE - SAFETY AND HYGIENE REQUIREMENTS
    I.S. EN 13112:2002 TANNERY MACHINES - SPLITTING AND BANDKNIFE SHEARING MACHINES - SAFETY REQUIREMENTS
    DIN EN 12012-2:2004-03 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 2: SAFETY REQUIREMENTS FOR STRAND PELLETISERS
    I.S. EN 12001:2012 CONVEYING, SPRAYING AND PLACING MACHINES FOR CONCRETE AND MORTAR - SAFETY REQUIREMENTS
    I.S. EN 14462:2015 SURFACE TREATMENT EQUIPMENT - NOISE TEST CODE FOR SURFACE TREATMENT EQUIPMENT INCLUDING ITS ANCILLARY HANDLING EQUIPMENT - ACCURACY GRADES 2 AND 3
    I.S. EN 13023:2003 NOISE MEASUREMENT METHODS FOR PRINTING, PAPER CONVERTING, PAPER MAKING MACHINES AND AUXILIARY EQUIPMENT - ACCURACY GRADES 2 AND 3
    I.S. EN ISO 11202:2010 ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS APPLYING APPROXIMATE ENVIRONMENTAL CORRECTIONS
    I.S. EN ISO 11201:2010 ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS IN AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE WITH NEGLIGIBLE ENVIRONMENTAL CORRECTIONS
    I.S. EN 1870-5:2002 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAWBENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES
    I.S. EN ISO 3746:2010 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - SURVEY METHOD USING AN ENVELOPING MEASUREMENT SURFACE OVER A REFLECTING PLANE
    I.S. EN 1870-7:2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 7: SINGLE BLADE LOG SAWING MACHINES WITH INTEGRATED FEED TABLE AND MANUAL LOADING AND/OR UNLOADING
    I.S. EN 1870-4:2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTIBLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING
    I.S. EN 415-7:2006 SAFETY OF PACKAGING MACHINES - PART 7: GROUP AND SECONDARY PACKAGING MACHINES
    I.S. EN ISO 9902-6:2001 TEXTILE MACHINERY - NOISE TEST CODE - PART 6: FABRIC MANUFACTURING MACHINERY (ISO 9902-6:2001)
    DIN EN ISO 16093:2017-10 Machine tools - Safety - Sawing machines for cold metal (ISO 16093:2017)
    ONORM EN 16486 : 2014 MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS
    I.S. EN 12463:2014 FOOD PROCESSING MACHINERY - FILLING MACHINES AND AUXILIARY MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    I.S. EN 14985:2012 CRANES - SLEWING JIB CRANES
    UNI EN ISO 11689 : 1998 ACOUSTICS - PROCEDURE FOR THE COMPARISON OF NOISE-EMISSION DATA FOR MACHINERY AND EQUIPMENT
    VDI 3767:1997-10 Characteristic noise emission values of technical sound sources - Machines for the forming of concrete blocks
    DIN EN 16474 E : 2015 PLASTICS AND RUBBER MACHINES - TYRE CURING PRESSES - SAFETY REQUIREMENTS
    UNI EN 691-1 : 2012 SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS
    DIN EN 12012-1:2015-05 (Draft) PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS
    DIN EN 415-9:2010-02 Safety of packaging machines - Part 9: Noise measurement methods for packaging machines, packaging lines and associated equipment, grade of accuracy 2 and 3
    DIN EN 13035-7 E : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 7: CUTTING MACHINES FOR LAMINATED GLASS
    UNI EN 415-8 : 2008 SAFETY OF PACKAGING MACHINES - PART 8: STRAPPING MACHINES
    BS ISO 15664:2001 Acoustics. Noise control design procedures for open plant
    11/30237560 DC : 0 BS EN 1870-12 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 12: PENDULUM CROSS-CUT SAWING MACHINES
    I.S. EN 13788:2002 MACHINE TOOLS - SAFETY - MULTI-SPINDLE AUTOMATIC TURNING MACHINES
    I.S. EN 848-1:2007 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES
    DIN EN ISO 18217:2015-12 Safety of woodworking machines - Edge-banding machines fed by chain(s) (ISO 18217:2015)
    13/30286103 DC : 0 BS EN 12331 - FOOD PROCESSING MACHINERY - MINCING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    PREN 13871 : DRAFT 2012 FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS
    PREN 13379 : DRAFT 2016 PASTA PROCESSING PLANT - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS
    11/30231787 DC : 0 BS EN 1870-14:2007+A1:2009/FPRA2 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 14: VERTICAL PANEL SAWING MACHINES
    14/30302515 DC : 0 BS EN 14175-3 - FUME CUPBOARDS - PART 3: TYPE TEST METHODS
    16/30337802 DC : 0 BS EN 1974 - FOOD PROCESSING MACHINERY - SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    11/30248966 DC : 0 BS EN 50416: 2005/FPRAB - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC CONVEYOR DISHWASHING MACHINES
    14/30272245 DC : 0 BS EN ISO 16090-1 - MACHINE TOOLS SAFETY - MACHINING CENTRES, MILLING MACHINES, TRANSFER MACHINES - PART 1: SAFETY REQUIREMENTS
    10/30232428 DC : DRAFT DEC 2010 BS EN 1870-16 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V CUTTING
    BS EN 1870-18:2013 Safety of woodworking machines. Circular sawing machines Dimension saws
    DIN EN 15467 E : 2015 FOOD PROCESSING MACHINERY - FISH HEADING AND FILLETING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    EN 1218-1:1999+A1:2009 Safety of woodworking machines - Tenoning machines - Part 1: Single end tenoning machines with sliding table
    DIN EN 1870-19 E : 2014 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS
    12/30253907 DC : DRAFT JULY 2012 BS EN 1807-1 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - TABLE BAND SAWS AND BAND RE-SAWS
    10/30233212 DC : 0 BS EN 848-3 - SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOLS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES
    BS EN 1807-2:2013 Safety of woodworking machines. Band sawing machines Log sawing machines
    10/30232422 DC : DRAFT DEC 2010 BS EN 1870-9 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 9: DOUBLE BLADE CIRCULAR SAWING MACHINES FOR CROSS-CUTTING WITH INTEGRATED FEED AND WITH MANUAL LOADING AND/OR UNLOADING
    10/30232425 DC : DRAFT DEC 2010 BS EN 1870-15 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 15: MULTI-BLADE CROSS-CUT SAWING MACHINES WITH INTEGRATED FEED OF THE WORKPIECE AND MANUAL LOADING AND/OR UNLOADING
    10/30232431 DC : DRAFT DEC 2010 BS EN 1870-17 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (MANUAL RADIAL ARM SAWS)
    UNI EN ISO 8230-1 : 2009 SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS
    BS EN 415-8:2008 Safety of packaging machines Strapping machines
    09/30181679 DC : 0 BS EN 13042-1:2007/A1 - MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 1: GOB FEEDER
    05/30133339 DC : DRAFT MAY 2005 EN 861 - SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES
    DIN EN 15165:2015-01 FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    05/30130673 DC : DRAFT MAR 2005 BS EN 15166 - FOOD PROCESSING MACHINERY - AUTOMATIC BACK SPLITTING MACHINES OF BUTCHERY CARCASSES - SAFETY AND HYGIENE REQUIREMENTS
    07/30137110 DC : 0 ISO 9612 - ACOUSTICS - DETERMINATION OF OCCUPATIONAL NOISE EXPOSURE - ENGINEERING METHOD
    BS EN 15165:2014 Food processing machinery. Forming machines. Safety and hygiene requirements
    BS EN ISO 19085-1:2017 Woodworking machines. Safety Common requirements
    11/30249086 DC : 0 BS EN 60335-2-64:2000/FP - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-64: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC KITCHEN MACHINES
    04/30110326 DC : DRAFT APR 2004 EN 1870-17 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT CIRCULAR SAWING MACHINES WITH ONE SAW UNIT (MANUAL RADIAL ARM SAWS)
    11/30237563 DC : 0 BS EN 1870-10 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES
    05/30133728 DC : DRAFT MAY 2005 EN 71-1 - SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
    00/562811 DC : DRAFT JUN 2000 BS ISO 11205 - ACOUSTICS - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS IN SITU AT THE WORK STATION AND AT OTHER SPECIFIED POSITIONS USING SOUND INTENSITY
    BS EN ISO 11553-3:2013 Safety of machinery. Laser processing machines Noise reduction and noise measurement methods for laser processing machines and hand-held processing devices and associated auxiliary equipment (accuracy grade 2)
    06/30139190 DC : DRAFT MAR 2006 ISO 8124-1 AMD 2 - SAFETY OF TOYS - PART 1: SAFETY ASPECTS RELATED TO MECHANICAL AND PHYSICAL PROPERTIES
    UNE-EN 16564:2015 Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions
    UNE-EN 16474:2015 Plastics and rubber machines - Tyre curing machines - Safety requirements
    12/30260302 DC : 0 BS EN 12268 - FOOD PROCESSING MACHINERY - BAND SAW MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    05/30133333 DC : DRAFT MAY 2005 EN 860 - SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANING MACHINES
    ISO 16090-1:2017 Machine tools safety — Machining centres, Milling machines, Transfer machines — Part 1: Safety requirements
    09/30182215 DC : 0 BS EN 12001:2003/A1 - CONVEYING, SPRAYING AND PLACING MACHINES FOR CONCRETE AND MORTAR - SAFETY REQUIREMENTS
    DIN EN 16474:2015-08 PLASTICS AND RUBBER MACHINES - TYRE CURING PRESSES - SAFETY REQUIREMENTS
    05/30133297 DC : DRAFT MAY 2005 EN 859 - SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANING MACHINES
    04/301784 DC : DRAFT JAN 2004 EN 848-2 - SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HANDFED/INTEGRATED FED ROUNTING MACHINES
    UNE-EN 1807-1:2013 Safety of woodworking machines - Band sawing machines - Part 1: Table band saws and band re-saws
    DIN EN 13035-6 E : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 6: MACHINES FOR BREAK-OUT
    EN 16252:2012 Machines for compacting waste materials or recyclable fractions - Horizontal baling presses - Safety requirements
    I.S. EN 1672-1:2014 FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS
    PREN 50570 : DRAFT 2011 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC TUMBLE DRYERS
    UNE-EN 1870-6:2003 Safety of woodworking machines. Circular sawing machines. Part 6: Circular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular saw benches, with manual loading and/or unloading.
    S.R. CEN ISO/TR 22100-1:2017 SAFETY OF MACHINERY - RELATIONSHIP WITH ISO 12100 - PART 1: HOW ISO 12100 RELATES TO TYPE-B AND TYPE-C STANDARDS (ISO/TR 22100-1:2015)
    UNI EN 1807-2 : 2013 SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 2: LOG SAWING MACHINES
    I.S. EN 15572:2015 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES
    UNI EN 415-10 : 2014 SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
    I.S. EN 50416:2005 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC CONVEYOR DISHWASHING MACHINES
    16/30338566 DC : 2016-06 BS EN 13379 - PASTA PROCESSING PLANT - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS
    ISO 10843:1997 Acoustics — Methods for the description and physical measurement of single impulses or series of impulses
    ANSI/ASA S12.50/ISO 3740 : 2002(R2017) Acoustics – Determination of sound power levels of noise sources – Guidelines for the use of basic standards - Nationally Adopted International Standards
    BS EN 14175-3:2003 Fume cupboards Type test methods
    BS EN ISO 16089:2015 Machine tools. Safety. Stationary grinding machines
    UNE-EN ISO 23125:2015 Machine tools - Safety - Turning machines (ISO 23125:2015, Corrected version 2016-03-15)
    I.S. EN 12013:2018 PLASTICS AND RUBBER MACHINES - INTERNAL MIXERS - SAFETY REQUIREMENTS
    PREN 1870-10 : DRAFT 2011 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES
    UNE-EN 1870-14:2008 Safety of woodworking machines - Circular sawing machines - Part 14: Vertical panel sawing machines
    ASTM F 963 : 2017 : REDLINE Standard Consumer Safety Specification for Toy Safety
    PREN 1459-1 : DRAFT 2014 ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 1: VARIABLE-REACH TRUCKS
    PREN 12301 : DRAFT 2015 PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS
    PREN 50569 : DRAFT 2011 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC SPIN EXTRACTORS
    EN ISO 19085-1:2017/AC:2018 WOODWORKING MACHINES - SAFETY - PART 1: COMMON REQUIREMENTS (ISO 19085-1:2017)
    UNI EN 13035-7 : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 7: CUTTING MACHINES FOR LAMINATED GLASS
    ONORM EN 15011 : 2014 CRANES - BRIDGE AND GANTRY CRANES
    DIN EN 1870-11:2014-02 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
    DIN EN 12750:2013-05 Safety of woodworking machines - Four sided moulding machines
    DIN EN ISO 9902-2 E : 2001 TEXTILE MACHINERY - NOISE TEST CODE - PART 2: SPINNING PREPARATORY AND SPINNING MACHINERY (ISO 9902-2:2001 + AMD 1:2009 + AMD 2:2014)
    DIN EN 1870-17:2015-06 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
    DIN EN 1870-15:2013-01 Safety of woodworking machines - Circular sawing machines - Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading
    DIN EN ISO 9902-5 E : 2001 TEXTILE MACHINERY - NOISE TEST CODE - PART 5: WEAVING AND KNITTING PREPARATORY MACHINERY (ISO 9902-5:2001 + AMD 1:2009 + AMD 2:2014)
    DIN EN 12545:2010-07 Footwear, leather and imitation leather goods manufacturing machines - Noise test code - Common requirements (includes Amendment A1:2009)
    DIN EN 13023:2010-08 Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment - Accuracy grades 2 and 3 (includes Amendment A1:2010)
    DIN EN 13113:2011-05 Tannery machines - Roller coating machines - Safety requirements (includes Amendment A1:2010)
    DIN EN 13035-3 E : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 3: CUTTING MACHINES
    DIN EN 848-3:2013-01 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOLS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES
    DIN EN 13861:2012-01 Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery
    DIN EN 848-1:2013-01 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES
    DIN EN 13035-9 E : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 9: WASHING INSTALLATIONS
    DIN EN ISO 1680:2014-04 ACOUSTICS - TEST CODE FOR THE MEASUREMENT OF AIRBORNE NOISE EMITTED BY ROTATING ELECTRICAL MACHINES (ISO 1680:2013)
    DIN EN 12629-1:2011-01 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 1: Common requirements (includes Amendment A1:2010)
    DIN EN 848-2:2013-01 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES
    DIN EN 15067 E : 2008 PLASTICS AND RUBBER MACHINES - FILM CONVERTING MACHINES FOR BAGS AND SACKS - SAFETY REQUIREMENTS
    UNI EN ISO 11202 : 2010 ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORKSTATION AND AT OTHER SPECIFIED POSITIONS APPLYING APPROXIMATE ENVIRONMENTAL CORRECTIONS
    DIN EN 13035-9:2010-07 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 9: Washing installations (includes Amendment A1:2010)
    DIN EN 14462:2015-08 SURFACE TREATMENT EQUIPMENT - NOISE TEST CODE FOR SURFACE TREATMENT EQUIPMENT INCLUDING ITS ANCILLARY HANDLING EQUIPMENT - ACCURACY GRADES 2 AND 3
    DIN EN 13042-3 E : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 3: IS MACHINES
    BS EN 848-1 : 2007 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES
    ISO 11546-1:1995 Acoustics Determination of sound insulation performances of enclosures Part 1: Measurements under laboratory conditions (for declaration purposes)
    BS EN 12629-1 : 2001 MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 1: COMMON REQUIREMENTS
    BS EN 1417:2014 Plastics and rubber machines. Two-roll mills. Safety requirements
    BS EN 1218-2 : 2004 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 2: DOUBLE END TENONING AND/OR PROFILING MACHINES FED BY CHAIN OR CHAINS
    BS EN ISO 21649:2009 Needle-free injectors for medical use. Requirements and test methods
    BS EN 1114-2 : 1998 PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 2: SAFETY REQUIREMENTS FOR DIE FACE PELLETISERS
    BS EN 13898 : 2003 MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL
    UNE-EN ISO 11203:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995)
    UNE-EN 12331:2016 Food processing machinery - Mincing machines - Safety and hygiene requirements
    BS EN 861 : 2007 SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES
    BS EN 13525 : 2005 FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY
    UNE-EN 1870-8:2013 Safety of woodworking machines - Circular sawing machines - Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading
    BS EN 848-2 : 2007 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES
    DIN EN 13042-2 E : 2009 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 2: HANDLING MACHINES FOR FEEDING
    ISO 21649:2006 Needle-free injectors for medical use — Requirements and test methods
    ONORM EN 13525 : 2010 FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY
    UNE-EN 848-1:2008 Safety of woodworking machines - One side moulding machines with rotating tool - Part 1: Single spindle vertical moulding machines
    UNI EN 13525 : 2010 FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY
    UNE-EN 848-3:2013 Safety of woodworking machines - One side moulding machines with rotating tool - Part 3: Numerically controlled (NC) boring and routing machines
    EN ISO 11203:2009 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995)
    I.S. EN 848-2:2007 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES
    UNI EN ISO 11203 : 2009 ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS FROM THE SOUND POWER LEVEL
    I.S. EN ISO 11203:2009 ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS FROM THE SOUND POWER LEVEL
    EN 16486:2014 Machines for compacting waste materials or recyclable fractions - Compactors - Safety requirements
    EN 1870-15:2012 Safety of woodworking machines - Circular sawing machines - Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading
    EN ISO 16093:2017 Machine tools - Safety - Sawing machines for cold metal (ISO 16093:2017)
    UNI EN 13042-2 : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 2: HANDLING MACHINES FOR FEEDING
    UNI EN 12001 : 2012 CONVEYING, SPRAYING AND PLACING MACHINES FOR CONCRETE AND MORTAR - SAFETY REQUIREMENTS
    UNI EN 13035-9 : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 9: WASHING INSTALLATIONS
    UNI EN 1265 : 2009 SAFETY OF MACHINERY - NOISE TEST CODE FOR FOUNDRY MACHINES AND EQUIPMENT
    UNI EN 1870-13 : 2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES
    UNI EN 1870-8 : 2013 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 8: SINGLE BLADE EDGING CIRCULAR RIP SAWING MACHINES WITH POWER DRIVEN SAW UNIT AND MANUAL LOADING AND/OR UNLOADING
    UNI EN 13035-4 : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 4: TILTING TABLES
    UNI EN 13379 : 2013 PASTA PROCESSING PLANTS - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR, STICK MAGAZINE - SAFETY AND HYGIENE REQUIREMENTS
    UNI EN 13042-1 : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 1: GOB FEEDER
    UNI EN 13113 : 2010 TANNERY MACHINES - ROLLER COATING MACHINES - SAFETY REQUIREMENTS
    UNI EN 1114-3 : 2009 PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS
    UNI EN ISO 11205 : 2009 ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - ENGINEERING METHOD FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS IN SITU AT THE WORK STATION AND AT OTHER SPECIFIED POSITIONS USING SOUND INTENSITY
    UNI EN 12545 : 2009 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - NOISE TEST CODE - COMMON REQUIREMENTS
    UNI EN 1870-15 : 2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 15: MULTI-BLADE CROSS-CUT SAWING MACHINES WITH INTEGRATED FEED OF THE WORKPIECE AND MANUAL LOADING AND/OR UNLOADING
    UNI EN 1114-2 : 2008 PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 2: SAFETY REQUIREMENTS FOR DIE FACE PELLETISERS
    UNI EN 13977 : 2011 RAILWAY APPLICATIONS - TRACK - SAFETY REQUIREMENTS FOR PORTABLE MACHINES AND TROLLEYS FOR CONSTRUCTION AND MAINTENANCE
    UNI EN 848-3 : 2012 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES
    UNI EN 12750 : 2013 SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES
    UNI EN 1114-1 : 2011 PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 1: SAFETY REQUIREMENTS FOR EXTRUDERS
    UNI EN 15067 : 2008 PLASTICS AND RUBBER MACHINES - FILM CONVERTING MACHINES FOR BAGS AND SACKS - SAFETY REQUIREMENTS
    UNI EN ISO 12001 : 2009 ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - RULES FOR THE DRAFTING AND PRESENTATION OF A NOISE TEST CODE
    UNI EN 1870-16 : 2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V CUTTING
    UNI EN 860 : 2012 SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANNING MACHINES
    UNI EN 13035-3 : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 3: CUTTING MACHINES
    UNI EN ISO 9902-2 : 2014 TEXTILE MACHINERY - NOISE TEST CODE - PART 2: SPINNING PREPARATORY AND SPINNING MACHINERY
    UNI EN ISO 4871 : 2009 ACOUSTICS - DECLARATION AND VERIFICATION OF NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT
    UNI EN 13871 : 2014 FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS
    UNI EN 12855 : 2010 FOOD PROCESSING MACHINERY - ROTATING BOWL CUTTERS - SAFETY AND HYGIENE REQUIREMENTS
    UNI EN ISO 11201 : 2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
    UNI EN 13378 : 2013 PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS
    UNI EN 12012-3 : 2008 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 3: SAFETY REQUIREMENTS FOR SHREDDERS
    UNI EN 13418 : 2013 PLASTICS AND RUBBER MACHINES - WINDING MACHINES FOR FILM OR SHEET - SAFETY REQUIREMENTS
    UNI EN 859 : 2012 SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANING MACHINES
    UNI EN ISO 9902-7 : 2014 TEXTILE MACHINERY - NOISE TEST CODE - PART 7: DYEING AND FINISHING MACHINERY
    UNI EN 13112 : 2010 TANNERY MACHINES - SPLITTING AND BANDKNIFE SHEARING MACHINES - SAFETY REQUIREMENTS
    UNI EN 1218-4 : 2009 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 4: EDGE BANDING MACHINES FED BY CHAIN(S)
    UNI EN ISO 3746 : 2011 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - SURVEY METHOD USING AN ENVELOPING MEASUREMENT SURFACE OVER A REFLECTING PLANE
    UNI EN 848-1 : 2013 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES
    UNI EN ISO 9902-3 : 2014 TEXTILE MACHINERY - NOISE TEST CODE - PART 3: NONWOVEN MACHINERY
    UNI EN 12629-1 : 2010 MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 1: COMMON REQUIREMENTS
    UNI EN ISO 9902-5 : 2014 TEXTILE MACHINERY - NOISE TEST CODE - PART 5: WEAVING AND KNITTING PREPARATORY MACHINERY
    UNI EN 13861 : 2011 SAFETY OF MACHINERY - GUIDANCE FOR THE APPLICATION OF ERGONOMICS STANDARDS IN THE DESIGN OF MACHINERY
    UNI EN 13042-3 : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 3: IS MACHINES
    EN 1870-11:2013 Safety of woodworking machines - Circular sawing machines - Part 11: Semi automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws)
    UNI EN ISO 9902-1 : 2014 TEXTILE MACHINERY - NOISE TEST CODE - PART 1: COMMON REQUIREMENTS
    UNI EN 1870-9 : 2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 9: DOUBLE BLADE CIRCULAR SAWING MACHINES FOR CROSS-CUTTING WITH INTEGRATED FEED AND WITH MANUAL LOADING AND/OR UNLOADING
    UNI EN 1870-12 : 2014 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 12: PENDULUM CROSS-CUT SAWING MACHINES
    UNI EN 415-5 : 2010 SAFETY OF PACKAGING MACHINES - PART 5: WRAPPING MACHINES
    UNI EN 14985 : 2012 CRANES - SLEWING JIB CRANES
    UNI EN 1870-14 : 2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 14: VERTICAL PANEL SAWING MACHINES
    UNI EN 13534 : 2010 FOOD PROCESSING MACHINERY - CURING INJECTION MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    UNI EN 1870-10 : 2013 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES
    UNI EN 13898 : 2009 MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL
    UNI EN 1870-11 : 2013 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
    EN 860:2007+A2:2012 Safety of woodworking machines - One side thickness planing machines
    UNI EN 1870-4 : 2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTIBLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING
    UNI EN 1870-1 : 2009 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS
    UNI EN 12409 : 2011 PLASTICS AND RUBBER MACHINES - THERMOFORMING MACHINES - SAFETY REQUIREMENTS
    UNI EN 13023 : 2010 NOISE MEASUREMENT METHODS FOR PRINTING, PAPER CONVERTING, PAPER MAKING MACHINES AND AUXILIARY EQUIPMENT - ACCURACY GRADES 2 AND 3
    UNI EN 13218 : 2008 MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES
    UNI EN 13042-5 : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 5: PRESSES
    UNI EN 848-2 : 2013 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES
    UNI EN ISO 9902-4 : 2014 TEXTILE MACHINERY - NOISE TEST CODE - PART 4: YARN PROCESSING, CORDAGE AND ROPE MANUFACTURING MACHINERY
    UNI EN 14070 : 2009 SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES
    UNI EN 12111 : 2014 TUNNELLING MACHINES - ROAD HEADERS AND CONTINUOUS MINERS - SAFETY REQUIREMENTS
    UNI EN 13289 : 2013 PASTA PROCESSING PLANTS - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS
    UNI EN 861 : 2012 SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES
    UNI EN 12012-2 : 2008 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 2: SAFETY REQUIREMENTS FOR STRAND PELLETISERS
    UNI EN 1807 : 2010 SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES
    UNI EN 12268 : 2014 FOOD PROCESSING MACHINERY - BAND SAW MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    UNI EN ISO 11546-1 : 2009 ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCES OF ENCLOSURES - PART 1: MEASUREMENTS UNDER LABORATORY CONDITIONS (FOR DECLARATION PURPOSES)
    UNI EN 415-7 : 2008 SAFETY OF PACKAGING MACHINES - PART 7: GROUP AND SECONDARY PACKAGING MACHINES
    UNI EN 1218-3 : 2009 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 3: HAND FED TENONING MACHINES WITH SLIDING TABLE FOR CUTTING STRUCTURAL TIMBERS
    UNI EN 1870-5 : 2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAWBENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES
    UNI EN ISO 11546-2 : 2009 ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCES OF ENCLOSURES - PART 2: MEASUREMENTS IN SITU (FOR ACCEPTANCE AND VERIFICATION PURPOSES)
    UNI EN 289 : 2014 PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS
    UNI EN 1870-7:2012 Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading
    UNI EN ISO 1680 : 2014 ACOUSTICS - TEST CODE FOR THE MEASUREMENT OF AIRBORNE NOISE EMITTED BY ROTATING ELECTRICAL MACHINES
    UNI EN 1547 : 2009 INDUSTRIAL THERMOPROCESSING EQUIPMENT - NOISE TEST CODE FOR INDUSTRIAL THERMOPROCESSING EQUIPMENT INCLUDING ITS ANCILLARY HANDLING EQUIPMENT
    UNI EN 13114 : 2010 TANNERY MACHINES - ROTATING PROCESS VESSELS - SAFETY REQUIREMENTS
    UNI EN 1807-1 : 2013 SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS
    14/30293313 DC : 0 BS EN ISO 19085-2 - WOODWORKING MACHINES - SAFETY - PART 2: HORIZONTAL BEAM PANEL CIRCULAR SAWING MACHINES
    BS EN 15571:2014 Machines and plants for mining and tooling of natural stone. Safety. Requirements for surface finishing machines
    ONORM EN ISO 9902-6 : 2014 TEXTILE MACHINERY - NOISE TEST CODE - PART 6: FABRIC MANUFACTURING MACHINERY (ISO 9902-6:2001 + AMD 1:2009 + AMD 2:2014)
    DIN EN ISO 11202:2010-10 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010)
    18/30369931 DC : 0 BS EN ISO 9902-6 - TEXTILE MACHINERY - NOISE TEST CODE - PART 6: FABRIC MANUFACTURING MACHINERY
    04/30124330 DC : 0 EN 15067-1 - PLASTICS AND RUBBER MACHINES - WELDING MACHINES FOR PLASTICS - PART 1: SAFETY REQUIREMENTS FOR FILM CONVERTING MACHINES FOR BAGS AND SACKS
    UNI EN ISO 21649 : 2009 NEEDLE-FREE INJECTORS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS
    08/30182786 DC : DRAFT JULY 2008 BS EN 13977 - RAILWAY APPLICATIONS - TRACK - SAFETY REQUIREMENTS FOR PORTABLE MACHINES AND TROLLEYS FOR CONSTRUCTION AND MAINTENANCE
    I.S. EN 13035-11:2006 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 11: DRILLING MACHINES
    11/30249219 DC : 0 BS EN 50569 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC SPIN EXTRACTORS
    DIN EN 1870-19:2014-03 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS
    09/30198762 DC : 0 BS EN 1807-1 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS
    13/30255092 DC : 0 BS EN 1417 - PLASTICS AND RUBBER MACHINES - TWO ROLL MILLS - SAFETY REQUIREMENTS
    I.S. EN 848-3:2012 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES
    16/30318928 DC : 0 BS EN ISO 19085-7 - WOODWORKING MACHINES - SAFETY - PART 7: SURFACE PLANING THICKNESS PLANING COMBINED SURFACE/THICKNESS PLANING MACHINES
    PREN 848-3 : DRAFT 2010 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOLS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES
    DIN EN 15572:2015-12 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES
    BS EN 12012-1 : 2007 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS
    07/30166811 DC : 0 BS EN ISO 23125 - SAFETY OF MACHINE TOOLS - TURNING MACHINES
    14/30302140 DC : 0 BS EN 1459-1 - ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 1: VARIABLE-REACH TRUCKS
    10/30211872 DC : 0 BS EN 12001 - CONVEYING, SPRAYING AND PLACING MACHINES FOR CONCRETE AND MORTAR - SAFETY REQUIREMENTS
    12/30263881 DC : 0 BS EN 1870-3 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 3: DOWN CUTTING CROSS-CUT SAWS AND DUAL PURPOSE DOWN CUTTING CROSS-CUT SAWS/CIRCULAR SAW BENCHES
    I.S. EN ISO 16090-1:2018 MACHINE TOOLS SAFETY - MACHINING CENTRES, MILLING MACHINES, TRANSFER MACHINES - PART 1: SAFETY REQUIREMENTS (ISO 16090-1:2017)
    I.S. EN 1870-6:2017 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIRE WOOD
    07/30172338 DC : DRAFT DEC 2007 BS EN 1114-1 - PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 1: SAFETY REQUIREMENTS FOR EXTRUDERS
    BS EN 15572:2015 Machines and plants for mining and tooling of natural stone. Safety. Requirements for edge finishing machines
    14/30263884 DC : 0 BS EN ISO 16093 - MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL
    11/30231784 DC : 0 BS EN 1870-13:2007+A1:2009/FPRA2 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES
    BS EN 415-10:2014 Safety of packaging machines General Requirements
    BS EN 16474:2015 Plastics and rubber machines. Tyre curing machines. Safety requirements
    16/30335973 DC : 0 BS ISO 19085-9 - WOODWORKING MACHINES - SAFETY - PART 9: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE)
    14/30293310 DC : 0 BS EN ISO 19085-1 - WOODWORKING MACHINES - SAFETY - PART 1: COMMON REQUIREMENTS
    BS EN ISO 16093:2017 Machine tools. Safety. Sawing machines for cold metal
    DIN EN 15571 E : 2015 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES
    11/30232159 DC : 0 BS EN ISO 4254-1 - AGRICULTURAL MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
    08/30183218 DC : DRAFT MAY 2008 BS EN 50416 AMD1 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC CONVEYOR DISHWASHING MACHINES
    14/30297793 DC : 0 BS EN ISO 19085-3 - WOODWORKING MACHINES - SAFETY REQUIREMENTS - PART 3: NC BORING AND ROUTING MACHINES
    02/560773 DC : DRAFT FEB 2002 BS EN ISO 11205.2 - ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - ENGINEERING METHOD FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS IN SITU AT THE WORK STATION AND AT OTHER SPECIFIED POSITIONS USING SOUND INTENSITY
    12/30268301 DC : 0 BS EN 16486 - MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS
    DIN EN 1870-18:2013-08 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS
    BS EN 1807-1:2013 Safety of woodworking machines. Band sawing machines Table band saws and band re-saws
    00/706812 DC : DRAFT MAR 2000 BS EN 13871 - FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    PREN 15180 : DRAFT 2011 FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS
    DIN EN ISO 16093 E : 2017 MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL (ISO 16093:2017)
    09/30181661 DC : 0 BS EN 13035-3:2003/A1 - MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 3: CUTTING MACHINES
    08/30185056 DC : DRAFT SEP 2008 BS EN 15861 - FOOD PROCESSING MACHINERY - SMOKE FACILITIES - SAFETY AND HYGIENE REQUIREMENTS
    DIN EN 16500:2014-10 MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS
    12/30260299 DC : 0 BS EN 15165 - FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    BS EN ISO 23125:2015 Machine tools. Safety. Turning machines
    PREN 13525 : DRAFT 2016 FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY
    BS EN 15163:2017 Machines and installations for the exploitation and processing of natural stone. Safety. Requirements for diamond wire saws
    UNI ISO 230-5 : 2010 TEST CODE FOR MACHINE TOOLS - PART 5: DETERMINATION OF THE NOISE EMISSION
    BS EN 13035-6 : 2006 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 6: MACHINES FOR BREAK-OUT
    UNI EN 1870-18 : 2014 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS
    UNE-EN 1807-2:2013 Safety of woodworking machines - Band sawing machines - Part 2: Log sawing machines
    DIN EN 16500 E : 2014 MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS
    DIN EN 13035-6:2010-07 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 6: Machines for break-out (includes Amendment A1:2009)
    DIN EN ISO 8230-1:2009-05 SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS
    DIN EN 15166 E : 2010 FOOD PROCESSING MACHINERY - AUTOMATIC BACK SPLITTING MACHINES OF BUTCHERY CARCASSES - SAFETY AND HYGIENE REQUIREMENTS
    I.S. EN 1807-1:2013 SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS
    UNE-EN 1672-1:2015 Food processing machinery - Basic concepts - Part 1: Safety requirements
    ANSI S12.50 : 2002 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - GUIDELINES FOR THE USE OF BASIC STANDARDS
    ISO 16089:2015 Machine tools Safety Stationary grinding machines
    PREN 15467 : DRAFT 2012 FOOD PROCESSING MACHINERY - FISH HEADING AND FILLETING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    PREN 1459-7 : DRAFT 2017 ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 7: TEST METHOD AND DETERMINATION OF NOISE EMISSION
    PREN 13378 : DRAFT 2016 PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS
    I.S. EN 1870-19:2013 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS
    I.S. EN 15467:2014 FOOD PROCESSING MACHINERY - FISH HEADING AND FILLETING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    CEN ISO/TR 22100-1:2017 Safety of machinery - Relationship with ISO 12100 - Part 1: How ISO 12100 relates to type-B and type-C standards (ISO/TR 22100-1:2015)
    EN 12012-1:2007+A1:2008 Plastics and rubber machines - Size reduction machines - Part 1: Safety requirements for blade granulators
    BS EN 12013:2018 Plastics and rubber machines. Internal mixers. Safety requirements
    PD CEN ISO/TR 22100-1:2017 Safety of machinery. Relationship with ISO 12100 How ISO 12100 relates to type-B and type-C standards
    EN 15163:2017 Machines and installations for the exploitation and processing of natural stone - Safety - Requirements for diamond wire saws
    ISO/TR 22100-1:2015 Safety of machinery Relationship with ISO 12100 Part 1: How ISO 12100 relates to type-B and type-C standards
    BS EN 12301 : 2000 PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS
    I.S. EN 15011:2011 CRANES - BRIDGE AND GANTRY CRANES
    I.S. EN 13035-7:2006 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 7: CUTTING MACHINES FOR LAMINATED GLASS
    DIN EN 14985:2012-05 Cranes - Slewing jib cranes
    I.S. EN 15166:2008 FOOD PROCESSING MACHINERY - AUTOMATIC BACK SPLITTING MACHINES OF BUTCHERY CARCASSES - SAFETY AND HYGIENE REQUIREMENTS
    I.S. EN 12301:2000 PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS
    EN 13035-3:2003 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 3: Cutting machines
    EN ISO 11200:2014 Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions (ISO 11200:2014)
    I.S. EN ISO 11200:2014 ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS (ISO/DIS 11200:2012)
    ONORM EN 12301 : 2009 PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS
    DIN EN ISO 9902-6 E : 2001 TEXTILE MACHINERY - NOISE TEST CODE - PART 6: FABRIC MANUFACTURING MACHINERY (ISO 9902-6:2001 + AMD 1:2009 + AMD 2:2014)
    DIN EN ISO 21649 E : 2010 NEEDLE-FREE INJECTORS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS
    DIN EN 13977:2011-04 Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance
    DIN EN 861:2012-09 SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES
    DIN EN ISO 11689:1997-03 ACOUSTICS - PROCEDURE FOR THE COMPARISON OF NOISE EMISSION-DATA FOR MACHINERY AND EQUIPMENT
    DIN EN 859:2012-09 SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANING MACHINES
    DIN EN 1870-1:2009-08 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS
    DIN EN 1114-1:2012-01 Plastics and rubber machines - Extruders and extrusion lines - Part 1: Safety requirements for extruders
    DIN EN 1114-3:2015-12 (Draft) PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS
    DIN EN 860:2012-09 SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANING MACHINES
    BS EN 415-5 : 2006 SAFETY OF PACKAGING MACHINES - PART 5: WRAPPING MACHINES
    BS EN ISO 1680:2013 Acoustics. Test code for the measurement of airborne noise emitted by rotating electrical machines
    BS EN ISO 11689 : 1997 ACOUSTICS - PROCEDURE FOR THE COMPARISON OF NOISE-EMISSION DATA FOR MACHINERY AND EQUIPMENT
    ISO 8230-1:2008 Safety requirements for dry-cleaning machines Part 1: Common safety requirements
    BS EN ISO 10821 : 2005 INDUSTRIAL SEWING MACHINES - SAFETY REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS
    BS EN 1870-12:2013 Safety of woodworking machines. Circular sawing machines Pendulum cross-cut sawing machines
    DIN EN 12301:2010-02 PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS
    BS EN ISO 9902-7 : 2001 TEXTILE MACHINERY - NOISE TEST CODE - PART 7: DYEING AND FINISHING MACHINERY
    ISO 10821:2005 Industrial sewing machines Safety requirements for sewing machines, units and systems
    BS EN 1218-3 : 2001 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 3: HAND FED TENONING MACHINES WITH SLIDING TABLE FOR CUTTING STRUCTURAL TIMBERS
    BS EN 13871:2014 Food processing machinery. Cubes cutting machinery. Safety and hygiene requirements
    BS EN 13035-4 : 2003 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 4: TILTING TABLES
    BS EN 12267 : 2003 FOOD PROCESSING MACHINERY - CIRCULAR SAW MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    ISO 11553-3:2013 Safety of machinery — Laser processing machines — Part 3: Noise reduction and noise measurement methods for laser processing machines and hand-held processing devices and associated auxiliary equipment (accuracy grade 2)
    BS EN 12268:2014 Food processing machinery. Band saw machines. Safety and hygiene requirements
    BS EN 1547 : 2001 INDUSTRIAL THERMOPROCESSING EQUIPMENT - NOISE TEST CODE FOR INDUSTRIAL THERMOPROCESSING EQUIPMENT INCLUDING ITS ANCILLARY HANDLING EQUIPMENT
    DIN EN ISO 9902-6:2014-10 Textile machinery - Noise test code - Part 6: Fabric manufacturing machinery (ISO 9902-6:2001 + Amd 1:2009 + Amd 2:2014)
    BS EN 1870-1 : 2007 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS
    17/30357380 DC : 0 BS EN 15011 - CRANES - BRIDGE AND GANTRY CRANES
    ISO 11202:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections
    ISO 4254-1:2013 Agricultural machinery — Safety — Part 1: General requirements
    BS EN 1218-4 : 2004 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 4: EDGE BANDING MACHINES FED BY CHAIN(S)
    BS EN ISO 11690-1:1997 Acoustics. Recommended practice for the design of low-noise workplaces containing machinery Noise control strategies
    BS EN ISO 9902-5 : 2001 TEXTILE MACHINERY - NOISE TEST CODE - PART 5: WEAVING AND KNITTING PREPARATORY MACHINERY
    ISO 9902-5:2001 Textile machinery — Noise test code — Part 5: Weaving and knitting preparatory machinery
    BS EN 13289 : 2001 PASTA PROCESSING PLANTS - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS
    BS EN 13112 : 2002 TANNERY MACHINES - SPLITTING AND BANDKNIFE SHEARING MACHINES - SAFETY REQUIREMENTS
    EN 13525:2005+A2:2009 Forestry machinery - Wood chippers - Safety
    BS EN ISO 11546-2:2009 Acoustics. Determination of sound insulation performances of enclosures Measurements in situ (for acceptance and verification purposes)
    BS EN 13023 : 2003 NOISE MEASUREMENT METHODS FOR PRINTING, PAPER CONVERTING, PAPER MAKING MACHINES AND AUXILIARY EQUIPMENT - ACCURACY GRADES 2 AND 3
    BS EN 1553:2000 Agricultural machinery. Agricultural self-propelled mounted, semi-mounted and trailed machines. Common safety requirements
    BS EN 12012-3 : 2001 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 3: SAFETY REQUIREMENTS FOR SHREDDERS
    UNI EN ISO 11200 : 2014 ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS
    ISO 9902-1:2001 Textile machinery — Noise test code — Part 1: Common requirements
    BS EN 13042-1 : 2007 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 1: GOB FEEDER
    ISO 11200:2014 Acoustics Noise emitted by machinery and equipment Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions
    DIN EN ISO 9902-4:2014-10 TEXTILE MACHINERY - NOISE TEST CODE - PART 4: YARN PROCESSING, CORDAGE AND ROPE MANUFACTURING MACHINERY (ISO 9902-4:2001 + AMD 1:2009 + AMD 2:2014)
    BS EN 1746:1999 Safety of machinery. Guidance for the drafting of the noise clauses of safety standards
    BS EN 13977:2011 Railway applications. Track. Safety requirements for portable machines and trolleys for construction and maintenance
    UNE-EN 12001:2013 Conveying, spraying and placing machines for concrete and mortar - Safety requirements
    UNE-EN 1870-15:2013 Safety of woodworking machines - Circular sawing machines - Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading
    ISO 12001:1996 Acoustics Noise emitted by machinery and equipment Rules for the drafting and presentation of a noise test code
    UNE-EN 13114:2002 Tannery machines- Rotating process vessels - Safety requirements.
    BS EN 1807 : 1999 SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES
    BS EN 14985:2012 Cranes. Slewing jib cranes
    BS EN ISO 9902-1 : 2001 TEXTILE MACHINERY - NOISE TEST CODE - PART 1: COMMON REQUIREMENTS
    ISO 1680:2013 Acoustics — Test code for the measurement of airborne noise emitted by rotating electrical machines
    BS EN 415-7 : 2006 SAFETY OF PACKAGING MACHINES - PART 7: GROUP AND SECONDARY PACKAGING MACHINES
    BS EN 1870-3:2014 Safety of woodworking machines. Circular sawing machines Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches
    ISO 23125:2015 Machine tools Safety Turning machines
    BS EN ISO 9902-6 : 2001 TEXTILE MACHINERY - NOISE TEST CODE - PART 6: FABRIC MANUFACTURING MACHINERY
    BS EN 1265 : 1999 SAFETY OF MACHINERY - NOISE TEST CODE FOR FOUNDRY MACHINES AND EQUIPMENT
    ISO 9902-4:2001 Textile machinery — Noise test code — Part 4: Yarn processing, cordage and rope manufacturing machinery
    UNE-EN 12750:2013 Safety of woodworking machines - Four sided moulding machines
    BS EN 12545 : 2000 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - NOISE TEST CODE - COMMON REQUIREMENTS
    BS EN 1218-5 : 2004 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 5: ONE SIDE PROFILING MACHINES WITH FIXED TABLE AND FEED ROLLERS OR FEED CHAIN
    BS EN 12750:2013 Safety of woodworking machines. Four sided moulding machines
    BS EN 1870-11:2013 Safety of woodworking machines. Circular sawing machines Semi automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws)
    UNE-EN ISO 12001:2010 Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code (ISO 12001:1996)
    UNE-EN ISO 11546-2:2010 Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995)
    BS EN 1870-4:2012 Safety of woodworking machines. Circular sawing machines Multiblade rip sawing machines with manual loading and/or unloading
    ISO 9902-7:2001 Textile machinery — Noise test code — Part 7: Dyeing and finishing machinery
    BS EN 12331:2015 Food processing machinery. Mincing machines. Safety and hygiene requirements
    BS ISO 19859:2016 Gas turbine applications. Requirements for power generation
    UNI EN 12301 : 2008 PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS
    ISO 18217:2015 Safety of woodworking machines Edge-banding machines fed by chain(s)
    ISO 9902-2:2001 Textile machinery — Noise test code — Part 2: Spinning preparatory and spinning machinery
    BS EN 14070 : 2003 SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES
    UNE-EN 860:2007 Safety of woodworking machines - One side thickness planing machines
    BS EN 13035-9 : 2006 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 9: WASHING INSTALLATIONS
    ISO 16093:2017 Machine tools — Safety — Sawing machines for cold metal
    BS EN ISO 3746:2009 Acoustics. Determination of sound power levels of noise sources using sound pressure. Survey method using an enveloping measurement surface over a reflecting plane
    BS EN 1870-13 : 2007 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES
    BS EN 13788:2002 Machine tools. Safety. Multi-spindle automatic turning machines
    UNE-EN 13112:2002 Tannery machines - Splitting and bandknife shearing machines - Safety requirements.
    BS EN 15011 : 2011 CRANES - BRIDGE AND GANTRY CRANES
    UNE-EN 12409:2009 Plastics and rubber machines - Thermoforming machines - Safety requirements
    ISO 9902-6:2001 Textile machinery Noise test code Part 6: Fabric manufacturing machinery
    BS EN 13114 : 2002 TANNERY MACHINES - ROTATING PROCESS VESSELS - SAFETY REQUIREMENTS
    10/30218104 DC : 0 BS EN 15011 - CRANES - BRIDGE & GANTRY CRANES
    UNE-EN 13525:2005 Forestry machinery - Wood chippers - Safety
    UNE-EN 1870-9:2013 Safety of woodworking machines - Circular sawing machines - Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading
    BS EN 13042-5 : 2003 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 5: PRESSES
    BS EN 13113 : 2002 TANNERY MACHINES - ROLLER COATING MACHINES - SAFETY REQUIREMENTS
    BS EN ISO 11200:2014 Acoustics. Noise emitted by machinery and equipment. Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions
    I.S. EN 13525:2005 FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY
    BS EN 1114-3 : 2001 PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS
    UNE-EN 1870-16:2013 Safety of woodworking machines - Circular sawing machines - Part 16: Double mitre sawing machines for V cutting
    ISO 11546-2:1995 Acoustics Determination of sound insulation performances of enclosures Part 2: Measurements in situ (for acceptance and verification purposes)
    BS EN ISO 4871:2009 Acoustics. Declaration and verification of noise emission values of machinery and equipment
    UNE-EN 13871:2015 Food processing machinery - Cubes cutting machinery - Safety and hygiene requirements
    BS EN ISO 12001:2009 Acoustics. Noise emitted by machinery and equipment. Rules for the drafting and presentation of a noise test code
    UNE-EN 859:2008 Safety of woodworking machines - Hand fed surface planing machines
    BS EN 1870-5 : 2002 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAW BENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES
    BS EN 860 : 2007 SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANING MACHINES
    UNE-EN 13113:2002 Tannery machines - Roller coating machines - Safety requirements.
    UNE-EN ISO 4871:2010 Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)
    UNE-EN 1114-1:2012 Plastics and rubber machines - Extruders and extrusion lines - Part 1: Safety requirements for extruders
    DIN EN ISO 9902-1:2014-10 TEXTILE MACHINERY - NOISE TEST CODE - PART 1: COMMON REQUIREMENTS (ISO 9902-1:2001 + AMD 1:2009 + AMD 2:2014)
    DIN EN 13042-5:2009-12 Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 5: Presses (includes Amendment A1:2009)
    EN 1417:2014 Plastics and rubber machines - Two-roll mills - Safety requirements
    EN 691-1:2012 Safety of woodworking machines - Part 1: Common requirements
    EN ISO 9902-3:2001/A2:2014 TEXTILE MACHINERY - NOISE TEST CODE - PART 3: NONWOVEN MACHINERY (ISO 9902-3:2001/AMD 2:2014)
    EN 13788 : 2001 MACHINE TOOLS - SAFETY - MULTI-SPINDLE AUTOMATIC TURNING MACHINES
    EN 13898:2003+A1:2009/AC:2010 MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL
    EN 15467:2014 Food processing machinery - Fish heading and filleting machines - Safety and hygiene requirements
    EN 415-10:2014 Safety of packaging machines - Part 10: General Requirements
    EN 15067:2007 Plastics and rubber machines - Film converting machines for bags and sacks - Safety requirements
    ONORM EN 12750 : 2013 SAFETY OF WOODWORKING MACHINES - FOUR-SIDED MOULDING MACHINES
    EN 13861:2011 Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery
    EN ISO 21649:2009 Needle-free injectors for medical use - Requirements and test methods (ISO 21649:2006)
    EN 415-7:2006+A1:2008 Safety of packaging machines - Part 7: Group and secondary packaging machines
    EN 415-8:2008 Safety of packaging machines - Part 8: Strapping machines
    EN ISO 9902-2:2001/A2:2014 TEXTILE MACHINERY - NOISE TEST CODE - PART 2: SPINNING PREPARATORY AND SPINNING MACHINERY (ISO 9902-2:2001/AMD 2:2014)
    EN 14985:2012 Cranes - Slewing jib cranes
    EN 1672-1:2014 Food processing machinery - Basic concepts - Part 1: Safety requirements
    EN 1547:2001+A1:2009 Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment
    EN 13977:2011 Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance
    ONORM EN 1807-1 : 2013 SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS
    EN ISO 12001:2009 Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code (ISO 12001:1996)
    EN 1870-16:2012 Safety of woodworking machines - Circular sawing machines - Part 16: Double mitre sawing machines for V cutting
    EN 1870-13:2007+A2:2012 Safety of woodworking machines - Circular sawing machines - Part 13: Horizontal beam panel sawing machines
    EN ISO 11689:1996/AC:2009 Acoustics - Procedure for the comparison of noise-emission data for machinery and equipment (ISO 11689:1996/Cor 1:2007)
    EN ISO 10821:2005/A1:2009 Industrial sewing machines - Safety requirements for sewing machines, units and systems - Amendment 1 (ISO 10821:2005/Amd 1:2009, Corrected version 2009-08-01)
    EN 1807:1999+A1:2009 Safety of woodworking machines - Band sawing machines
    EN ISO 9902-1:2001/A2:2014 TEXTILE MACHINERY - NOISE TEST CODE - PART 1: COMMON REQUIREMENTS (ISO 9902-1:2001/AMD 2:2014)
    EN ISO 11201:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010)
    EN 15166:2008 Food processing machinery - Automatic back splitting machines of butchery carcasses - Safety and hygiene requirements
    EN 13218:2002+A1:2008/AC:2010 MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES
    EN 1870-2:1999/AC:2002 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 2: HORIZONTAL BEAM PANEL SAWS AND VERTICAL PANEL SAWS
    EN 1870-6:2017 Safety of woodworking machines - Circular sawing machines - Part 6: Circular sawing machines for fire wood
    EN 16500:2014 Machines for compacting waste materials or recyclable fractions - Vertical baling presses - Safety requirements
    EN ISO 11553-3:2013 Safety of machinery - Laser processing machines - Part 3: Noise reduction and noise measurement methods for laser processing machines and hand-held processing devices and associated auxiliary equipment (accuracy grade 2) (ISO 11553-3:2013)
    EN 1870-3:2014 Safety of woodworking machines - Circular sawing machines - Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches
    EN 1870-18:2013 Safety of woodworking machines - Circular sawing machines - Part 18: Dimension saws
    EN 1870-14:2007+A2:2012 Safety of woodworking machines - Circular sawing machines - Part 14: Vertical panel sawing machines
    EN 1807-2:2013 Safety of woodworking machines - Band sawing machines - Part 2: Log sawing machines
    EN 1870-1:2007+A1:2009 Safety of woodworking machines - Circular sawing machines - Part 1: Circular saw benches (with and without sliding table), dimension saws and building site saws
    EN 1870-5 : 2002 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAWBENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES
    EN 1870-7:2012 Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading
    EN ISO 1680:2013 Acoustics - Test code for the measurement of airborne noise emitted by rotating electrical machines (ISO 1680:2013)
    EN 13871:2014 Food processing machinery - Cubes cutting machinery - Safety and hygiene requirements
    EN 15165:2014 Food processing machinery - Forming machines - Safety and hygiene requirements
    EN 1870-19:2013 Safety of woodworking machines - Circular sawing machines - Part 19: Circular saw benches (with and without sliding table) and building site saws
    EN ISO 11546-1:2009 Acoustics - Determination of sound insulation performances of enclosures - Part 1: Measurements under laboratory conditions (for declaration purposes) (ISO 11546-1:1995)
    EN 1870-17:2012+A1:2015 Safety of woodworking machines - Circular sawing machines - Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (radial arm saws)
    EN 13035-4:2003+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 4: Tilting tables
    EN 859:2007+A2:2012 Safety of woodworking machines - Hand fed surface planing machines
    EN ISO 16089:2015 Machine tools - Safety - Stationary grinding machines (ISO 16089:2015)
    EN ISO 11546-2:2009 Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995)
    EN 14462:2015 Surface treatment equipment - Noise test code for surface treatment equipment including its ancillary handling equipment - Accuracy grades 2 and 3
    EN ISO 9902-7:2001/A2:2014 TEXTILE MACHINERY - NOISE TEST CODE - PART 7: DYEING AND FINISHING MACHINERY (ISO 9902-7:2001/AMD 2:2014)
    EN 848-2 : 2007 COR 2012 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES
    EN 13042-5:2003+A1:2009 Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 5: Presses
    EN 861:2007+A2:2012 Safety of woodworking machines - Surface planing and thicknessing machines
    EN 1870-8:2012 Safety of woodworking machines - Circular sawing machines - Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading
    EN 15572:2015 Machines and plants for mining and tooling of natural stone - Safety - Requirements for edge finishing machines
    EN 16474:2015 Plastics and rubber machines - Tyre curing machines - Safety requirements
    EN 1870-4:2012 Safety of woodworking machines - Circular sawing machines - Part 4: Multiblade rip sawing machines with manual loading and/or unloading
    EN 415-9:2009 Safety of packaging machines - Part 9: Noise measurement methods for packaging machines, packaging lines and associated equipment, grade of accuracy 2 and 3
    EN 15180:2014 Food processing machinery - Food depositors - Safety and hygiene requirements
    EN 289:2014 Plastics and rubber machines - Compression moulding machines and transfer moulding machines - Safety requirements
    EN 415-5:2006+A1:2009 Safety of packaging machines - Part 5: Wrapping machines
    EN ISO 4871:2009 Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)
    EN 848-3:2012 Safety of woodworking machines - One side moulding machines with rotating tool - Part 3: Numerically controlled (NC) boring and routing machines
    EN 1870-12:2013 Safety of woodworking machines - Circular sawing machines - Part 12: Pendulum cross-cut sawing machines
    EN ISO 9902-4:2001/A2:2014 Textile machinery - Noise test code - Part 4: Yarn processing, cordage and rope manufacturing machinery - Amendment 2 (ISO 9902-4:2001/Amd 2:2014)
    EN ISO 11205:2009 Acoustics - Noise emitted by machinery and equipment - Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity (ISO 11205:2003)
    EN 1870-10:2013 Safety of woodworking machines - Circular sawing machines - Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines
    EN 14070:2003+A1:2009/AC:2010 SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES
    EN 1870-9:2012 Safety of woodworking machines - Circular sawing machines - Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading
    EN ISO 9902-5:2001/A2:2014 TEXTILE MACHINERY - NOISE TEST CODE - PART 5: WEAVING AND KNITTING PREPARATORY MACHINERY (ISO 9902-5:2001/AMD 2:2014)
    EN ISO 8230-1:2008 Safety requirements for dry-cleaning machines - Part 1: Common safety requirements (ISO 8230-1:2008)
    DIN EN 15572 E : 2015 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES
    I.S. EN 12012-4:2006 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 4: SAFETY REQUIREMENTS FOR AGGLOMERATORS
    ISO 19085-1:2017 Woodworking machines Safety Part 1: Common requirements
    UNE-EN 15163:2018 Machines and installations for the exploitation and processing of natural stone - Safety - Requirements for diamond wire saws
    DIN EN 13035-11:2010-07 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 11: Drilling machines (includes Amendment A1:2010)
    BS EN 691-1:2012 Safety of woodworking machines Common requirements
    08/30178810 DC : DRAFT MAY 2008 BS EN 12750 - SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES
    DIN EN 691-1:2013-01 SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS
    09/30206358 DC : DRAFT SEP 2009 BS EN 1870-4 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTI-BLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING
    11/30232437 DC : 0 BS EN 1870-6:2002+A1:2009/FPRA2 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIREWOOD AND DUAL PURPOSE CIRCULAR SAWING MACHINES FOR FIREWOOD/CIRCULAR SAW BENCHES, WITH MANUAL LOADING AND/OR UNLOADING
    DIN EN 1672-1:2014-12 FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS
    12/30240135 DC : 0 BS ISO 11200 - ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS
    I.S. EN 1870-1:2007 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS
    12/30272422 DC : 0 BS EN 14462 - SURFACE TREATMENT EQUIPMENT - NOISE TEST CODE FOR SURFACE TREATMENT EQUIPMENT INCLUDING ITS ANCILLARY HANDLING EQUIPMENT - ACCURACY GRADES 2 AND 3
    03/301050 DC : DRAFT JAN 2003 ISO 4254-1 ED.3 - AGRICULTURAL MACHINERY - TECHNICAL MEANS FOR ENSURING SAFETY - PART 1: GENERAL
    16/30318924 DC : 0 BS EN ISO 19085-6 - WOODWORKING MACHINES - SAFETY - PART 6: SINGLE SPINDLE VERTICAL MOULDING MACHINES ('TOUPIES')
    I.S. EN 1870-13:2007 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES
    09/30181712 DC : 0 BS EN 12855:2003/A1 - FOOD PROCESSING MACHINERY - ROTATING BOWL CUTTERS - SAFETY AND HYGIENE REQUIREMENTS
    BS EN ISO 18217:2015 Safety of woodworking machines. Edge-banding machines fed by chain(s)
    16/30341470 DC : 0 BS EN ISO 19085-10 - WOODWORKING MACHINES - SAFETY - PART 10: BUILDING SITE SAWS (CONTRACTOR SAWS)
    BS EN 15166:2008 Food processing machinery. Automatic back splitting machines of butchery carcasses. Safety and hygiene requirements
    11/30251974 DC : 0 BS EN 15180 - FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS
    PREN 13289 : DRAFT 2015 PASTA PROCESSING PLANT - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS
    I.S. EN 15165:2014 FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    BS PD ISO/TR 22100-1 : 2015 SAFETY OF MACHINERY - RELATIONSHIP WITH ISO 12100 - PART 1: HOW ISO 12100 RELATES TO TYPE-B AND TYPE-C STANDARDS
    14/30276846 DC : 0 BS EN ISO 18217 - SAFETY OF WOODWORKING MACHINES - EDGE-BANDING MACHINES FED CHAIN(S)
    12/30260496 DC : 0 BS EN 12750 - SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES
    DIN EN ISO 11203:2010-01 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995)
    EN 1218-2:2004+A1:2009 Safety of woodworking machines - Tenoning machines - Part 2: Double end tenoning and/or profiling machines fed by chain or chains
    07/30161919 DC : 0 EN 940 - SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES
    15/30300474 DC : DRAFT FEB 2015 BS ISO 19085-5 - WOODWORKING MACHINES - SAFETY - PART 5: DIMENSION SAWS
    UNI EN ISO 9902-6 : 2014 TEXTILE MACHINERY - NOISE TEST CODE - PART 6: FABRIC MANUFACTURING MACHINERY
    DIN EN 15165 E : 2015 FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    09/30181670 DC : 0 BS EN 13035-7:2006/A1 - MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 7: CUTTING MACHINES FOR LAMINATED GLASS
    BS EN 1870-6:2017 Safety of woodworking machines. Circular sawing machines Circular sawing machines for fire wood
    UNE-EN 1870-18:2013 Safety of woodworking machines - Circular sawing machines - Part 18: Dimension saws
    UNE-EN 50416:2005 Household and similar electrical appliances - Safety - Particular requirements for commercial electric conveyor dishwashing machines
    DIN EN 15180:2015-01 FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS
    UNE-EN 15571:2015 Machines and plants for mining and tooling of natural stone - Safety - Requirements for surface finishing machines
    08/30183262 DC : DRAFT JUNE 2008 BS EN 60335-2-58 AMD - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-58: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC DISHWASHING MACHINES
    16/30331355 DC : 0 BS EN ISO 19085-8 - WOODWORKING MACHINES - SAFETY - PART 8: WIDE BELT CALIBRATING AND SANDING MACHINES
    DIN EN 415-8:2011-06 SAFETY OF PACKAGING MACHINES - PART 8: STRAPPING MACHINES
    UNI EN ISO 11553-3 : 2013 SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 3: NOISE REDUCTION AND NOISE MEASUREMENT METHODS FOR LASER PROCESSING MACHINES AND HAND-HELD PROCESSING DEVICES AND ASSOCIATED AUXILIARY EQUIPMENT (ACCURACY GRADE 2)
    02/123878 DC : DRAFT OCT 2002 BS EN 14175-3 - FUME CUPBOARDS - PART 3: TYPE TEST METHODS
    I.S. EN 16474:2015 PLASTICS AND RUBBER MACHINES - TYRE CURING MACHINES - SAFETY REQUIREMENTS
    UNE-EN 415-9:2010 Safety of packaging machines - Part 9: Noise measurement methods for packaging machines, packaging lines and associated equipment, grade of accuracy 2 and 3
    17/30365068 DC : 0 BS EN 14175-3 - FUME CUPBOARDS - PART 3: TYPE TEST METHODS
    BS EN 15180:2014 Food processing machinery. Food depositors. Safety and hygiene requirements
    DIN EN 15180 E : 2015 FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS
    UNE-EN ISO 18217:2016 Safety of woodworking machines - Edge-banding machines fed by chain(s) (ISO 18217:2015)
    09/30181667 DC : 0 BS EN 13035-6:2006/A1 - MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 6: MACHINES FOR BREAK-OUT
    02/705139 DC : DRAFT APR 2002 PREN 1870-16 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V-CUTTING
    08/30175655 DC : DRAFT APR 2008 BS EN 1265 AMD 1 - SAFETY OF MACHINERY - NOISE TEST CODE FOR FOUNDRY MACHINES AND EQUIPMENT
    DIN EN ISO 3746:2011-03 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010)
    UNE-EN 16252:2013 Machines for compacting waste materials or recyclable fractions - Horizontal baling presses - Safety requirements
    ISO 8124-1:2018 Safety of toys — Part 1: Safety aspects related to mechanical and physical properties
    I.S. EN 1870-18:2013 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS
    ISO 3740:2000 Acoustics Determination of sound power levels of noise sources Guidelines for the use of basic standards
    I.S. EN 415-8:2008 SAFETY OF PACKAGING MACHINES - PART 8: STRAPPING MACHINES
    I.S. EN ISO 19085-1:2017 WOODWORKING MACHINES - SAFETY - PART 1: COMMON REQUIREMENTS (ISO 19085-1:2017)
    EN 12331:2015 Food processing machinery - Mincing machines - Safety and hygiene requirements
    I.S. EN ISO 16089:2015 MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES (ISO/DIS 16089:2014)
    DIN EN ISO 16089:2016-06 MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES (ISO 16089:2015)
    EN ISO 18217:2015 Safety of woodworking machines - Edge-banding machines fed by chain(s) (ISO 18217:2015)
    16/30337481 DC : 0 BS EN 13525 - FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY
    ANSI S12.50 : 2002 : R2012 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - GUIDELINES FOR THE USE OF BASIC STANDARDS
    UNI EN 15166 : 2009 FOOD PROCESSING MACHINERY - AUTOMATIC BACK SPLITTING MACHINES OF BUTCHERY CARCASSES - SAFETY AND HYGIENE REQUIREMENTS
    17/30364315 DC : 0 BS EN 1459-7 - ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 7: TEST METHOD AND DETERMINATION OF NOISE EMISSION
    UNI EN 1672-1 : 2014 FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS
    UNI EN 13035-6 : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 6: MACHINES FOR BREAK-OUT
    ANSI S12.50 : 2002 : R2007 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - GUIDELINES FOR THE USE OF BASIC STANDARDS
    15/30314036 DC : 0 BS EN 12012-1 - PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS AND SHREDDERS
    ANSI S12.56 : 2011 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - SURVEY METHOD USING AN ENVELOPING MEASUREMENT SURFACE OVER A REFLECTING PLANE
    PREN 1417 : DRAFT 2013 PLASTICS AND RUBBER MACHINES - TWO ROLL MILLS - SAFETY REQUIREMENTS
    I.S. EN ISO 23125:2015 MACHINE TOOLS - SAFETY - TURNING MACHINES (ISO 23125:2015)
    EN 12301:2000+A1:2008 Plastics and rubber machines - Calenders - Safety requirements
    DIN EN 1870-4:2012-06 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTIBLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING
    I.S. EN 13035-6:2006 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 6: MACHINES FOR BREAK-OUT
    I.S. EN 12012-1:2007 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS
    ONORM EN 1114-3 : 2010 PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS
    UNE-EN 12463:2006 Food processing machinery - Filling machines and auxiliary machines - Safety and hygiene requirements
    UNE-EN ISO 11201:2010 Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Engineering method in an essentially free field over a reflecting plane (ISO 11201:1995, including Cor 1:1997)
    DIN EN ISO 11205:2009-12 Acoustics - Noise emitted by machinery and equipment - Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity (ISO 11205:2003)
    DIN EN 1218-2:2009-10 Safety of woodworking machines - Tenoning machines - Part 2: Double end tenoning and/or profiling machines fed by chain or chains (includes Amendment A1:2009)
    DIN EN 12012-4:2010-01 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 4: SAFETY REQUIREMENTS FOR AGGLOMERATORS
    DIN EN 1870-5:2013-01 Safety of woodworking machines - Circular sawing machines - Part 5: Circular saw benches/up-cutting cross-cut sawing machines (includes Amendment A2:2012)
    DIN EN 13289:2015-12 (Draft) Pasta processing plant - Dryers and coolers - Safety and hygiene requirements; German and English version prEN 13289:2015
    DIN EN 13534:2011-02 Food processing machinery - Curing injection machines - Safety and hygiene requirements (includes Amendment A1:2010)
    ONORM EN 1218-2 : 2009 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 2: DOUBLE END TENONING AND/OR PROFILING MACHINES FED BY CHAIN OR CHAINS
    DIN EN 1218-5:2010-02 Safety of woodworking machines - Tenoning machines - Part 5: One side profiling machines with fixed table and feed rollers or feed chain (includes Amendment A1:2009)
    DIN EN 13035-4 E : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 4: TILTING TABLES
    DIN EN 289:2014-09 PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS
    DIN EN 13871:2015-01 FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS
    BS EN ISO 11202:2010 Acoustics. Noise emitted by machinery and equipment. Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections
    BS EN 12012-4 : 2006 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 4: SAFETY REQUIREMENTS FOR AGGLOMERATORS
    ISO 11690-1:1996 Acoustics Recommended practice for the design of low-noise workplaces containing machinery Part 1: Noise control strategies
    BS EN 1870-8:2012 Safety of woodworking machines. Circular sawing machines Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading
    BS EN 1218-1 : 1999 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 1: SINGLE END TENONING MACHINES WITH SLIDING TABLE
    UNE-EN ISO 4254-1:2016 Agricultural machinery - Safety - Part 1: General requirements (ISO 4254-1:2013)
    BS EN 1870-16:2012 Safety of woodworking machines. Circular sawing machines Double mitre sawing machines for V cutting
    BS EN 12012-2 : 2001 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 2: SAFETY REQUIREMENTS FOR STRAND PELLETISERS
    BS EN 848-3:2012 Safety of woodworking machines. One side moulding machines with rotating tool Numerically controlled (NC) boring and routing machines
    BS EN 1114-1:2011 Plastics and rubber machines. Extruders and extrusion lines Safety requirements for extruders
    I.S. EN 859:2007 SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANNING MACHINES
    I.S. EN 860:2007 SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANING MACHINES
    BS EN 13042-2 : 2004 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 2: HANDLING MACHINES FOR FEEDING
    BS EN 12001:2012 Conveying, spraying and placing machines for concrete and mortar. Safety requirements
    BS EN ISO 9902-4 : 2001 TEXTILE MACHINERY - NOISE TEST CODE - PART 4: YARN PROCESSING, CORDAGE AND ROPE MANUFACTURING MACHINERY
    ISO 11201:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
    BS EN ISO 11205:2009 Acoustics. Noise emitted by machinery and equipment. Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity
    BS EN 1870-14 : 2007 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 14: VERTICAL PANEL SAWING MACHINES
    BS EN 1870-17 : 2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
    BS EN 12463:2014 Food processing machinery. Filling machines and auxiliary machines. Safety and hygiene requirements
    DIN EN ISO 9902-2:2014-10 TEXTILE MACHINERY - NOISE TEST CODE - PART 2: SPINNING PREPARATORY AND SPINNING MACHINERY (ISO 9902-2:2001 + AMD 1:2009 + AMD 2:2014)
    DIN EN ISO 9902-7:2014-10 Textile machinery - Noise test code - Part 7: Dyeing and finishing machinery (ISO 9902-7:2001 + Amd 1:2009 + Amd 2:2014)
    EN 1114-3:2001+A1:2008 Plastics and rubber machines - Extruders and extrusion lines - Part 3: Safety requirements for haul-offs
    DIN EN ISO 9902-6:2001-07 TEXTILE MACHINERY - NOISE TEST CODE - PART 6: FABRIC MANUFACTURING MACHINERY (ISO 9902-6:2001 + AMD 1:2009 + AMD 2:2014)
    DIN EN ISO 9902-3:2001-07 TEXTILE MACHINERY - NOISE TEST CODE - PART 3: NONWOVEN MACHINERY (ISO 9902-3:2001 + AMD 1:2009 + AMD 2:2014)
    DIN EN ISO 9902-7:2001-07 TEXTILE MACHINERY - NOISE TEST CODE - PART 7: DYEING AND FINISHING MACHINERY (ISO 9902-7:2001 + AMD 1:2009 + AMD 2:2014)
    EN 13042-2:2004+A1:2009 Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 2: Handling machines for feeding
    UNI EN 1218-2 : 2009 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 2: DOUBLE END TENONING AND/OR PROFILING MACHINES FED BY CHAIN OR CHAINS
    ONORM EN 12331 : 2015 FOOD PROCESSING MACHINERY - MINCING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    DIN EN ISO 12001:2010-01 Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code (ISO 12001:1996)
    EN 13035-11:2006+A1:2010 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 11: Drilling machines
    DIN EN ISO 9902-4:2001-07 TEXTILE MACHINERY - NOISE TEST CODE - PART 4: YARN PROCESSING, CORDAGE AND ROPE MANUFACTURING MACHINERY (ISO 9902-4:2001 + AMD 1:2009 + AMD 2:2014)
    DIN EN 1114-2:1998-06 PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 2: SAFETY REQUIREMENTS FOR DIE FACE PELLETISERS
    EN 12629-1:2000+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 1: Common requirements
    EN 12001:2012 Conveying, spraying and placing machines for concrete and mortar - Safety requirements
    EN 50416 : 2005 AMD 1 2015 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC CONVEYOR DISHWASHING MACHINES
    DIN EN 13898:2009-09 MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL
    DIN EN ISO 11546-2:2010-01 Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995)
    EN 12750:2013 Safety of woodworking machines - Four sided moulding machines
    DIN EN ISO 11546-1:2010-01 Acoustics - Determination of sound insulation performances of enclosures - Part 1: Measurements under laboratory conditions (for declaration purposes) (ISO 11546-1:1995)
    DIN EN ISO 9902-5:2001-07 TEXTILE MACHINERY - NOISE TEST CODE - PART 5: WEAVING AND KNITTING PREPARATORY MACHINERY (ISO 9902-5:2001 + AMD 1:2009 + AMD 2:2014)
    EN 12111:2014 Tunnelling machines - Road headers and continuous miners - Safety requirements
    DIN EN 12012-1:2010-02 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS
    UNI EN 15011 : 2014 CRANES - BRIDGE AND GANTRY CRANES
    UNE-EN 860:2007+A2:2012 Safety of woodworking machines - One side thickness planing machines
    UNE-EN 848-2:2007+A1:2010 Safety of woodworking machines - One side moulding machines with rotating tool - Part 2: Single spindle hand fed/integrated fed routing machines
    UNE-EN 848-2:2007 Safety of woodworking machines - One side moulding machines with rotating tool - Part 2: Single spindle hand fed/integrated fed routing machines
    UNE-EN 1870-17:2013 Safety of woodworking machines - Circular sawing machines - Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (radial arm saws)
    ONORM EN 1417 : 2015 PLASTICS AND RUBBER MACHINES - TWO ROLL MILLS - SAFETY REQUIREMENTS
    UNE-EN 15011:2011 Cranes - Bridge and gantry cranes
    UNE-EN ISO 11202:2010 V2 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010)
    UNE-EN 1870-5:2003 Safety of woodworking machines - Circular sawing machines - Part 5: Circular sawbenches/up-cutting cross-cut sawing machines.
    UNE-EN 859:2008+A2:2012 Safety of woodworking machines - Hand fed surface planing machines
    UNE-EN 415-5:2007 Safety of packaging machines - Part 5: Wrapping machines
    UNE-EN 12629-1:2001 MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FORM CONCRETE AND CALCIUM-SILICATE. SAFETY. PART 1: COMMON REQUIREMENTS
    UNE-EN 13023:2004 Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment - Accuracy grades 2 and 3

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 11202:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections
    ISO 11200:2014 Acoustics Noise emitted by machinery and equipment Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions
    ISO 4871:1996 Acoustics — Declaration and verification of noise emission values of machinery and equipment
    ISO 12001:1996 Acoustics Noise emitted by machinery and equipment Rules for the drafting and presentation of a noise test code
    AS 5337:2019 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane
    ISO 3744:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane
    ISO/TR 11690-3:1997 Acoustics Recommended practice for the design of low-noise workplaces containing machinery Part 3: Sound propagation and noise prediction in workrooms
    ISO 3743-2:1994 Acoustics Determination of sound power levels of noise sources using sound pressure Engineering methods for small, movable sources in reverberant fields Part 2: Methods for special reverberation test rooms
    ISO/TR 25417:2007 Acoustics Definitions of basic quantities and terms
    ISO 9614-1:1993 Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 1: Measurement at discrete points
    IEC 60942:2003 Electroacoustics - Sound calibrators
    ISO 3747:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering/survey methods for use in situ in a reverberant environment
    ISO 3740:2000 Acoustics Determination of sound power levels of noise sources Guidelines for the use of basic standards
    ISO 9614-2:1996 Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 2: Measurement by scanning
    ISO 7574-1:1985 Acoustics — Statistical methods for determining and verifying stated noise emission values of machinery and equipment — Part 1: General considerations and definitions
    ISO 11205:2003 Acoustics — Noise emitted by machinery and equipment — Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity
    ISO 3746:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane
    ISO 3534-2:2006 Statistics Vocabulary and symbols Part 2: Applied statistics
    AS/NZS ISO 8124.1:2019 Safety of toys Safety aspects related to mechanical and physical properties
    ISO 6926:2016 Acoustics Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels
    ISO 1996-1:2016 Acoustics Description, measurement and assessment of environmental noise Part 1: Basic quantities and assessment procedures
    ISO 9614-3:2002 Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 3: Precision method for measurement by scanning
    ISO 11203:1995 Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level
    ISO 3741:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Precision methods for reverberation test rooms
    ISO 3745:2012 Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for anechoic rooms and hemi-anechoic rooms
    IEC 61260:1995 Electroacoustics - Octave-band and fractional-octave-band filters
    ISO 11201:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
    ISO/IEC Guide 98-3:2008 Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995)
    ISO 3743-1:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for small movable sources in reverberant fields Part 1: Comparison method for a hard-walled test room
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective