ISO/IEC 17025:2005
|
General requirements for the competence of testing and calibration laboratories |
ISO 2977:1997
|
Petroleum products and hydrocarbon solvents Determination of aniline point and mixed aniline point |
ISO 80000-4:2006
|
Quantities and units Part 4: Mechanics |
ISO 7619-1:2010
|
Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 1: Durometer method (Shore hardness) |
ISO 15136-2:2006
|
Petroleum and natural gas industries — Progressing cavity pump systems for artificial lift — Part 2: Surface-drive systems |
ASTM E 446 : 2015 : REDLINE
|
Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness |
ASNT SNT TC 1A : 2016
|
TOPICAL OUTLINES FOR QUALIFICATION OF NONDESTRUCTIVE TESTING PERSONNEL |
ISO/TS 29001:2010
|
Petroleum, petrochemical and natural gas industries Sector-specific quality management systems Requirements for product and service supply organizations |
ASTM E 309 : 2016 : REDLINE
|
Standard Practice for Eddy Current Examination of Steel Tubular Products Using Magnetic Saturation |
ASTM D 429 : 2014 : REDLINE
|
Standard Test Methods for Rubber Property—Adhesion to Rigid Substrates |
ASME PV CODE 9 : 2017
|
BOILER AND PRESSURE VESSEL CODE - WELDING, BRAZING, AND FUSING QUALIFICATIONS - QUALIFICATION STANDARD FOR WELDING, BRAZING, AND FUSING PROCEDURES; WELDERS; BRAZERS; AND WELDING, BRAZING, AND FUSING OPERATORS |
ISO 9712:2012
|
Non-destructive testing Qualification and certification of NDT personnel |
ISO 4662:2017
|
Rubber, vulcanized or thermoplastic Determination of rebound resilience |
ISO 815-1:2014
|
Rubber, vulcanized or thermoplastic Determination of compression set Part 1: At ambient or elevated temperatures |
ASTM D 1414 : 2015 : REDLINE
|
Standard Test Methods for Rubber O-Rings |
ISO 4649:2017
|
Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using a rotating cylindrical drum device |
ASTM E 273 : 2015 : REDLINE
|
Standard Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing |
ISO 6892-1:2016
|
Metallic materials Tensile testing Part 1: Method of test at room temperature |
ASTM D 5790 : 1995
|
Standard Test Method for Measurement of Purgeable Organic Compounds in Water by Capillary Column Gas Chromatography/Mass Spectrometry |
ISO 9606-1:2012
|
Qualification testing of welders — Fusion welding — Part 1: Steels |
ASME B46.1 : 2009
|
SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY) |
MIL-STD-792 Revision F:2006
|
IDENTIFICATION MARKING REQUIREMENTS FOR SPECIAL PURPOSE COMPONENTS |
ISO 34-1:2015
|
Rubber, vulcanized or thermoplastic Determination of tear strength Part 1: Trouser, angle and crescent test pieces |
ASTM E 10 : 2017-05
|
TEST METHOD FOR BRINELL HARDNESS OF METALLIC MATERIALS |
NACE TM 01 92 : 2012
|
EVALUATING ELASTOMERIC MATERIALS IN CARBON DIOXIDE DECOMPRESSION ENVIRONMENTS |
API 11B : 2010
|
SPECIFICATION FOR SUCKER RODS, POLISHED RODS AND LINERS, COUPLINGS, SINKER BARS, POLISHED ROD CLAMPS, STUFFING BOXES, AND PUMPING TEES |
ISO 15612:2004
|
Specification and qualification of welding procedures for metallic materials Qualification by adoption of a standard welding procedure |
ISO 31-0:1992
|
Quantities and units Part 0: General principles |
ISO 15614-1:2017
|
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys |
ISO 1302:2002
|
Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation |
ISO 15611:2003
|
Specification and qualification of welding procedures for metallic materials — Qualification based on previous welding experience |
ASTM E 426 : 2016 : REDLINE
|
Standard Practice for Electromagnetic (Eddy Current) Examination of Seamless and Welded Tubular Products, Titanium, Austenitic Stainless Steel and Similar Alloys |
AWS B2.1/B2.1M : 2014
|
SPECIFICATION FOR WELDING PROCEDURE AND PERFORMANCE QUALIFICATION |
ISO 13665:1997
|
Seamless and welded steel tubes for pressure purposes Magnetic particle inspection of the tube body for the detection of surface imperfections |
ISO 7743:2017
|
Rubber, vulcanized or thermoplastic Determination of compression stress-strain properties |
ISO 9000:2015
|
Quality management systems — Fundamentals and vocabulary |
SAE AS 4059F : 2013
|
AEROSPACE FLUID POWER - CONTAMINATION CLASSIFICATION FOR HYDRAULIC FLUIDS |
BS 2M 54:1991
|
Specification for temperature control in the heat treatment of metals |
ISO 37:2017
|
Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties |
ASTM E 709 : 2015 : REDLINE
|
Standard Guide for Magnetic Particle Testing |
AWS D1.1/D1.1M : 2015
|
STRUCTURAL WELDING CODE-STEEL |
ISO 15613:2004
|
Specification and qualification of welding procedures for metallic materials Qualification based on pre-production welding test |
SAE AMS H 6875 : 2010
|
HEAT TREATMENT OF STEEL RAW MATERIALS |
ISO 15607:2003
|
Specification and qualification of welding procedures for metallic materials General rules |
API TR 5C3 : 2008
|
CALCULATING PERFORMANCE PROPERTIES OF PIPE USED AS CASING OR TUBING |
ASTM D 471 : 2016-02
|
TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS |
ISO 10428:1993
|
Petroleum and natural gas industries — Sucker rods (pony rods, polished rods, couplings and sub-couplings) — Specification |
ASTM D 638 : 2014 : REDLINE
|
Standard Test Method for Tensile Properties of Plastics |
ISO 18265:2013
|
Metallic materials — Conversion of hardness values |
ISO 11960:2014
|
Petroleum and natural gas industries Steel pipes for use as casing or tubing for wells |
ISO 1817:2015
|
Rubber, vulcanized or thermoplastic Determination of the effect of liquids |
ISO 12095:1994
|
Seamless and welded steel tubes for pressure purposes Liquid penetrant testing |
ASTM D 1418 : 2017 : REDLINE
|
Standard Practice for Rubber and Rubber Latices—Nomenclature |
ASTM E 92 : 2017 : REDLINE
|
Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials |