Skip to content
Please enter a keyword to search

  • ISO 15493:2003

    Current The latest, up-to-date edition.

    Plastics piping systems for industrial applications Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) Specifications for components and the system Metric series

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s): 

    Published date:  16-04-2003

    Publisher:  International Organization for Standardization

    Add To Cart

    Abstract - (Show below) - (Hide below)

    ISO 15493:2003 specifies the characteristics and requirements for components such as pipes, fittings and valves made from one of the following materials:

    1. acrylonitrile-butadiene-styrene (ABS);
    2. unplasticized poly(vinyl chloride) (PVC-U);
    3. chlorinated poly(vinyl chloride) (PVC-C);

    intended to be used for thermoplastics piping systems in above-ground industrial applications.

    General Product Information - (Show below) - (Hide below)

    Development Note Supersedes ISO/FDIS 15493 (04/2003)
    Document Type Standard
    Publisher International Organization for Standardization
    Status Current

    Standards Referenced By This Book - (Show below) - (Hide below)

    UNI EN 15014 : 2008 PLASTICS PIPING SYSTEMS - BURIED AND ABOVE GROUND SYSTEMS FOR WATER AND OTHER FLUIDS UNDER PRESSURE - PERFORMANCE CHARACTERISTICS FOR PIPES, FITTINGS AND THEIR JOINTS
    DIN EN 15389 E : 2008 INDUSTRIAL VALVES - PERFORMANCE CHARACTERISTICS OF THERMOPLASTIC VALVES WHEN USED AS CONSTRUCTION PRODUCTS
    UNE-EN 13598-2:2017 Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for manholes and inspection chambers
    I.S. EN 13598-2:2016 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 2: SPECIFICATIONS FOR MANHOLES AND INSPECTION CHAMBERS
    I.S. EN ISO 16136:2006 INDUSTRIAL VALVES - BUTTERFLY VALVES OF THERMOPLASTICS MATERIALS
    I.S. EN ISO 21787:2006 INDUSTRIAL VALVES - GLOBE VALVES OF THERMOPLASTICS MATERIALS
    I.S. EN ISO 16138:2006 INDUSTRIAL VALVES - DIAPHRAGM VALVES OF THERMOPLASTICS MATERIALS
    I.S. EN ISO 16139:2006 INDUSTRIAL VALVES - GATE VALVES OF THERMOPLASTICS MATERIALS
    I.S. EN ISO 16135:2006 INDUSTRIAL VALVES - BALL VALVES OF THERMOPLASTICS MATERIALS
    ONORM EN ISO 16139 : 2008 INDUSTRIAL VALVES - GATE VALVES OF THERMOPLASTICS MATERIALS
    I.S. EN ISO 16137:2006 INDUSTRIAL VALVES - CHECK VALVES OF THERMOPLASTICS MATERIALS
    BS EN ISO 16135:2006 Industrial valves. Ball valves of thermoplastic materials
    UNE-EN 14814:2016 Adhesives for thermoplastic piping systems for fluids under pressure - Specifications
    BS EN ISO 16139:2006 Industrial valves. Gate valves of thermoplastic materials
    DD ISO/TS 26873:2010 Plastics pipes and fittings. Definition and construction procedures for reference lines
    14/30310792 DC : 0 BS EN 13598-2 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 2: SPECIFICATIONS FOR MANHOLES AND INSPECTION CHAMBERS IN TRAFFIC AREAS AND DEEP UNDERGROUND INSTALLATIONS
    15/30293506 DC : 0 BS EN 14814 - ADHESIVES FOR THERMOPLASTIC PIPING SYSTEMS FOR FLUIDS UNDER PRESSURE - SPECIFICATIONS
    PREN 14814 : DRAFT 2015 ADHESIVES FOR THERMOPLASTIC PIPING SYSTEMS FOR FLUIDS UNDER PRESSURE - SPECIFICATIONS
    ONORM EN ISO 16136 : 2008 INDUSTRIAL VALVES - BUTTERFLY VALVES OF THERMOPLASTICS MATERIALS
    ONORM EN ISO 16137 : 2008 INDUSTRIAL VALVES - CHECK VALVES OF THERMOPLASTICS MATERIALS
    DIN EN 14814:2008-03 ADHESIVES FOR THERMOPLASTIC PIPING SYSTEMS FOR FLUIDS UNDER PRESSURE - SPECIFICATIONS
    BS EN 14814:2016 Adhesives for thermoplastic piping systems for fluids under pressure. Specifications
    ISO 16136:2006 Industrial valves Butterfly valves of thermoplastics materials
    ISO 17885:2015 Plastics piping systems Mechanical fittings for pressure piping systems Specifications
    I.S. EN 14814:2016 ADHESIVES FOR THERMOPLASTIC PIPING SYSTEMS FOR FLUIDS UNDER PRESSURE - SPECIFICATIONS
    06/30124428 DC : 0 EN 13598-2 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY (VINYL CHLORIDE)(PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 2: SPECIFICATIONS FOR MANHOLES AND INSPECTION CHAMBERS IN TRAFFIC AREAS AND DEEP UNDERGROUND INSTALLATIONS
    04/30117816 DC : DRAFT AUG 2004 ISO/DIS 9393-2 - THERMOPLASTICS VALVES FOR INDUSTRIAL APPLICATIONS - PRESSURE TEST METHODS AND REQUIREMENTS - PART 2: TEST CONDITIONS AND BASIC REQUIREMENTS
    BS ISO 9393-1:2004 Thermoplastics valves for industrial applications. Pressure test methods and requirements General
    ONORM EN ISO 16138 : 2008 INDUSTRIAL VALVES - DIAPHRAGM VALVES OF THERMOPLASTICS MATERIALS
    DIN EN ISO 16135:2006-06 INDUSTRIAL VALVES - BALL VALVES OF THERMOPLASTICS MATERIALS
    BS EN ISO 16138:2006 Industrial valves. Diaphragm valves of thermoplastics materials
    ISO 16135:2006 Industrial valves Ball valves of thermoplastics materials
    EN ISO 21787:2006 Industrial valves - Globe valves of thermoplastics materials (ISO 21787:2006)
    PREN 13598-2 : DRAFT 2014 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 2: SPECIFICATIONS FOR MANHOLES AND INSPECTION CHAMBERS IN TRAFFIC AREAS AND DEEP UNDERGROUND INSTALLATIONS
    ISO 13272:2011 Plastics piping systems for non-pressure underground drainage and sewerage — Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP), polypropylene with mineral modifiers (PP-MD) and polyethylene (PE) — Specifications for manholes and inspection chambers in traffic areas and underground installations
    ONORM EN ISO 16135 : 2008 INDUSTRIAL VALVES - BALL VALVES OF THERMOPLASTICS MATERIALS
    DIN EN ISO 21787 E : 2006 INDUSTRIAL VALVES - GLOBE VALVES OF THERMOPLASTICS MATERIALS
    DIN EN 14814 E : 2016 ADHESIVES FOR THERMOPLASTIC PIPING SYSTEMS FOR FLUIDS UNDER PRESSURE - SPECIFICATIONS
    DIN EN ISO 16138:2006-06 INDUSTRIAL VALVES - DIAPHRAGM VALVES OF THERMOPLASTICS MATERIALS
    DIN EN ISO 16136:2006-06 INDUSTRIAL VALVES - BUTTERFLY VALVES OF THERMOPLASTICS MATERIALS
    DIN EN ISO 16137:2006-06 INDUSTRIAL VALVES - CHECK VALVES OF THERMOPLASTICS MATERIALS
    DIN EN ISO 16139:2006-06 INDUSTRIAL VALVES - GATE VALVES OF THERMOPLASTICS MATERIALS
    ISO 21787:2006 Industrial valves Globe valves of thermoplastics materials
    BS EN ISO 16137:2006 Industrial valves. Check valves of thermoplastic materials
    EN 13598-2:2016 Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for manholes and inspection chambers
    BS EN ISO 21787:2006 Industrial valves. Globe valves of thermoplastics materials
    ISO 16137:2006 Industrial valves Check valves of thermoplastics materials
    BS EN ISO 16136:2006 Industrial valves. Butterfly valves of thermoplastic materials
    ISO 16139:2006 Industrial valves Gate valves of thermoplastics materials
    DIN EN ISO 21787:2006-06 INDUSTRIAL VALVES - GLOBE VALVES OF THERMOPLASTICS MATERIALS
    ISO 10931:2005 Plastics piping systems for industrial applications Poly(vinylidene fluoride) (PVDF) Specifications for components and the system
    EN ISO 16139:2006 Industrial valves - Gate valves of thermoplastics materials (ISO 16139:2006)
    EN ISO 16135:2006 Industrial valves - Ball valves of thermoplastics materials (ISO 16135:2006)
    EN 14814:2016 Adhesives for thermoplastic piping systems for fluids under pressure - Specifications
    EN ISO 16136:2006 Industrial valves - Butterfly valves of thermoplastics materials (ISO 16136:2006)
    EN ISO 10931:2005/A1:2015 Plastics piping systems for industrial applications - Poly(vinylidene fluoride) (PVDF) - Specifications for components and the system (ISO 10931:2005/FDAM 1:2015)
    EN ISO 16138:2006 Industrial valves - Diaphragm valves of thermoplastics materials (ISO 16138:2006)
    EN ISO 16137:2006 Industrial valves - Check valves of thermoplastics materials (ISO 16137:2006)
    DIN EN 13598-2 E : 2016 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 2: SPECIFICATIONS FOR MANHOLES AND INSPECTION CHAMBERS
    DIN EN 13598-2:2016-09 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 2: SPECIFICATIONS FOR MANHOLES AND INSPECTION CHAMBERS
    ISO/TS 26873:2010 Plastics pipes and fittings — Definition and construction procedures for reference lines
    BS ISO 17885:2015 Plastics piping systems. Mechanical fittings for pressure piping systems. Specifications
    DIN EN 15389:2008-10 INDUSTRIAL VALVES - PERFORMANCE CHARACTERISTICS OF THERMOPLASTIC VALVES WHEN USED AS CONSTRUCTION PRODUCTS
    BS EN 13598-2:2009 Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Specifications for manholes and inspection chambers in traffic areas and deep underground installations
    ONORM EN ISO 21787 : 2008 INDUSTRIAL VALVES - GLOBE VALVES OF THERMOPLASTICS MATERIALS
    DIN EN ISO 10931:2015-11 PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLY(VINYLIDENE FLUORIDE) (PVDF) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM (ISO 10931:2005 + AMD 1:2015)
    BS EN ISO 10931 : 2005 PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLY(VINYLIDENE FLUORIDE) (PVDF) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM
    ISO 16138:2006 Industrial valves Diaphragm valves of thermoplastics materials
    DIN EN 14814:2016-09 ADHESIVES FOR THERMOPLASTIC PIPING SYSTEMS FOR FLUIDS UNDER PRESSURE - SPECIFICATIONS

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 16135:2006 Industrial valves Ball valves of thermoplastics materials
    ISO 580:2005 Plastics piping and ducting systems — Injection-moulded thermoplastics fittings — Methods for visually assessing the effects of heating
    EN ISO 12162:2009 Thermoplastics materials for pipes and fittings for pressure applications - Classification, designation and design coefficient (ISO 12162:2009)
    ISO/TR 10358:1993 Plastics pipes and fittings Combined chemical-resistance classification table
    ISO 10241:1992 International terminology standards Preparation and layout
    ISO 2507-2:1995 Thermoplastics pipes and fittings — Vicat softening temperature — Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes
    ISO 15494:2015 Plastics piping systems for industrial applications — Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) — Metric series for specifications for components and the system
    EN ISO 1158:1998 Plastics - Vinyl chloride homopolymers and copolymers - Determination of chlorine content (ISO 1158:1998)
    EN ISO 1043-1:2011/A1:2016 PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMER AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011/AMD 1:2016)
    ISO 265-1:1988 Pipes and fittings of plastics materials Fittings for domestic and industrial waste pipes Basic dimensions: Metric series Part 1: Unplasticized poly(vinyl chloride) (PVC-U)
    ISO 2507-1:1995 Thermoplastics pipes and fittings — Vicat softening temperature — Part 1: General test method
    ISO 3127:1994 Thermoplastics pipes — Determination of resistance to external blows — Round-the-clock method
    ISO 3:1973 Preferred numbers Series of preferred numbers
    EN 743 : 1994 PLASTICS PIPING AND DUCTING SYSTEMS - THERMOPLASTICS PIPES - DETERMINATION OF THE LONGITUDINAL REVERSION
    EN ISO 9080:2012 Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation (ISO 9080:2012)
    EN 802:1994 Plastics piping and ducting systems - Injection-moulded thermoplastics fittings for pressure piping systems - Test method for maximum deformation by crushing
    EN 763 : 1994 PLASTICS PIPING AND DUCTING SYSTEMS - INJECTION MOULDED THERMOPLASTICS FITTINGS - TEST METHOD FOR VISUALLY ASSESSING EFFECTS OF HEATING
    ISO 12162:2009 Thermoplastics materials for pipes and fittings for pressure applications Classification, designation and design coefficient
    EN 1778:1999 Characteristic values for welded thermoplastics constructions - Determination of allowable stresses and moduli for design of thermoplastics equipment
    EN ISO 228-1:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
    ISO 15853:1999 Thermoplastics materials Preparation of tubular test pieces for the determination of the hydrostatic strength of materials used for injection moulding
    ISO 3126:2005 Plastics piping systems Plastics components Determination of dimensions
    ISO 11922-1:1997 Thermoplastics pipes for the conveyance of fluids — Dimensions and tolerances — Part 1: Metric series
    ISO 7-1:1994 Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation
    EN 921:1994/AC:1995 PLASTICS PIPING SYSTEMS - THERMOPLASTICS PIPES - DETERMINATION OF RESISTANCE TO INTERNAL PRESSURE AT CONSTANT TEMPERATURE
    ISO 472:2013 Plastics Vocabulary
    ISO 9853:1991 Injection-moulded unplasticized poly(vinyl chloride) (PVC-U) fittings for pressure pipe systems — Crushing test
    EN 727:1994 Plastics piping and ducting systems - Thermoplastics pipes and fittings - Determination of Vicat softening temperature (VST)
    ISO 2505-1:1994 Thermoplastics pipes Longitudinal reversion Part 1: Determination methods
    ISO 1158:1998 Plastics — Vinyl chloride homopolymers and copolymers — Determination of chlorine content
    ISO 16138:2006 Industrial valves Diaphragm valves of thermoplastics materials
    ISO 1183-2:2004 Plastics Methods for determining the density of non-cellular plastics Part 2: Density gradient column method
    ISO 9311-1:2005 Adhesives for thermoplastic piping systems — Part 1: Determination of film properties
    EN 744:1995 Plastics piping and ducting systems - Thermoplastics pipes - Test method for resistance to external blows by the round-the-clock method
    ISO 16137:2006 Industrial valves Check valves of thermoplastics materials
    ISO 9001:2015 Quality management systems — Requirements
    EN 580:2003 Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for the resistance to dichloromethane at a specified temperature (DCMT)
    ISO 306:2013 Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST)
    ISO 4065:1996 Thermoplastics pipes Universal wall thickness table
    ISO 16136:2006 Industrial valves Butterfly valves of thermoplastics materials
    ISO 3514:1976 Chlorinated polyvinyl chloride (CPVC) pipes and fittings — Specification and determination of density
    ISO/TR 16913:1999 Plastics pipes and fittings — Definitions of types of test
    ISO 497:1973 Guide to the choice of series of preferred numbers and of series containing more rounded values of preferred numbers
    ISO 16139:2006 Industrial valves Gate valves of thermoplastics materials
    ISO 21787:2006 Industrial valves Globe valves of thermoplastics materials
    EN 12107 : 1997 PLASTICS PIPING SYSTEM - INJECTION MOULDED THERMOPLASTICS FITTINGS, VALVES AND ANCILLARY EQUIPMENT - DETERMINATION OF THE LONG-TERM HYDROSTATIC STRENGTH OF THERMOPLASTICS MATERIALS FOR INJECTION MOULDING OF PIPING COMPONENTS
    ISO 1043-1:2011 Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics
    EN ISO 306:2013 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2013)
    ISO/TR 9080:1992 Thermoplastics pipes for the transport of fluids — Methods of extrapolation of hydrostatic stress rupture data to determine the long-term hydrostatic strength of thermoplastics pipe materials
    EN ISO 472:2013 Plastics - Vocabulary (ISO 472:2013)
    ISO 228-1:2000 Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation
    ISO 9852:2007 Unplasticized poly(vinyl chloride) (PVC-U) pipes — Dichloromethane resistance at specified temperature (DCMT) — Test method
    1997/23/EC : 1997 DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT
    ISO 1167-1:2006 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids Determination of the resistance to internal pressure Part 1: General method
    ISO 727-1:2002 Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure — Part 1: Metric series
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective