BS EN ISO 12625-15:2015
|
Tissue paper and tissue products Determination of optical properties. Measurement of brightness and colour with C/2° (indoor daylight) illuminant |
DIN ISO 16260:2016-10 (Draft)
|
PAPER AND BOARD - DETERMINATION OF INTERNAL BOND STRENGTH (ISO 16260:2016) |
NF ISO 2493-1 : 2011
|
PAPER AND BOARD - DETERMINATION OF BENDING RESISTANCE - PART 1: CONSTANT RATE OF DEFLECTION |
DIN ISO 9961:1994-03
|
DRAUGHTING MEDIA FOR TECHNICAL DRAWINGS - NATURAL TRACING PAPER |
ISO 9895:2008
|
Paper and board — Compressive strength — Short-span test |
I.S. EN ISO 12625-12:2010
|
TISSUE PAPER AND TISSUE PRODUCTS - PART 12: DETERMINATION OF TENSILE STRENGTH OF PERFORATED LINES - CALCULATION OF PERFORATION EFFICIENCY |
BS ISO 20494:2017
|
Paper. Requirements for stability for general graphic applications |
03/309374 DC : DRAFT JUNE 2003
|
ISO 12625-4 - TISSUE PAPER AND TISSUE PRODUCTS - PART 4: DETERMINATION OF TENSILE STRENGTH, STRETCH AT BREAK AND TENSILE ENERGY ABSORPTION |
DIN EN ISO 12625-16 E : 2015
|
TISSUE PAPER AND TISSUE PRODUCTS - PART 16: DETERMINATION OF OPTICAL PROPERTIES - OPACITY (PAPER BACKING) - DIFFUSE REFLECTANCE METHOD (ISO 12625-16:2015) |
15/30302582 DC : 0
|
BS ISO 5631-1 - PAPER AND BOARD - DETERMINATION OF COLOUR BY DIFFUSE REFLECTANCE - PART 1: INDOOR DAYLIGHT CONDITIONS (C/2 DEGREES) |
16/30325728 DC : 0
|
BS ISO 9416 - PAPER - DETERMINATION OF LIGHT SCATTERING AND ABSORPTION COEFFICIENTS (USING KUBELKA-MUNK THEORY) |
09/30201918 DC : 0
|
BS EN 15947-4 - PYROTECHNIC ARTICLES - FIREWORKS, CATEGORIES 1, 2 AND 3 - PART 4: TEST METHODS |
14/30287209 DC : 0
|
BS ISO 11476 - PAPER AND BOARD - DETERMINATION OF CIE-WHITENESS, C/2 DEGREES (INDOOR ILLUMINATION CONDITIONS) |
NF ISO 16532-3 : 2010
|
PAPER AND BOARD - DETERMINATION OF GREASE RESISTANCE - PART 3: TURPENTINE TEST FOR VOIDS IN GLASSINE AND GREASEPROOF PAPERS |
NF ISO 20369 : 2010
|
MATERIAL USED FOR PRODUCING WRAPPINGS FOR CIGARETTE FILTERS, CIGARETTES AND OTHER TOBACCO PRODUCTS - DETERMINATION OF CITRATE CONTENT |
15/30325867 DC : 0
|
BS EN 868-3 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 3: PAPER FOR USE IN THE MANUFACTURE OF PAPER BAGS (SPECIFIED IN EN 868-4) AND IN THE MANUFACTURE OF POUCHES AND REELS (SPECIFIED IN EN 868-5) - REQUIREMENTS AND TEST METHODS |
07/30164326 DC : 0
|
BS ISO 16532-1 - PAPER AND BOARD - DETERMINATION OF GREASE RESISTANCE - PART 1: GREASE PERMEABILITY METHOD |
11/30247446 DC : 0
|
BS EN ISO 12625-11 - TISSUE PAPER AND TISSUE PRODUCTS - PART 11: DETERMINATION OF WET BALL BURST STRENGTH |
EN 12130:1998
|
FEATHER AND DOWN - TEST METHODS - DETERMINATION OF THE FILLING POWER (MASSIC VOLUME) |
09/30210529 DC : 0
|
BS ISO 12625-13 - TISSUE PAPER AND TISSUE PRODUCTS - PART 13: DETERMINATION OF THE SPECTRAL REFLECTANCE FACTOR (BRIGHTNESS) AT THE WAVELENGTH R 457 NM WITH AND WITHOUT UV STIMULUS AND OPACITY |
CSA ISO/IEC 15457-3 : 2009 : R2014
|
IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
ISO 2493:1992
|
Paper and board Determination of resistance to bending |
ISO 11605:1995
|
Paper and board Calibration of variable-area flowmeters |
ISO 13821:2002
|
Corrugated fibreboard Determination of edgewise crush resistance Waxed edge method |
DIN 53113:1990-06
|
DETERMINING THE BURSTING STRENGTH OF PAPER |
NF EN 60332-1-3 : 2005 AMD 1 2015
|
TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 1-3: TEST FOR VERTICAL FLAME PROPAGATION FOR A SINGLE INSULATED WIRE OR CABLE - PROCEDURE FOR DETERMINATION OF FLAMING DROPLETS/PARTICLES |
ISO 5269-3:2008
|
Pulps — Preparation of laboratory sheets for physical testing — Part 3: Conventional and Rapid-Köthen sheet formers using a closed water system |
ISO 5629:2017
|
Paper and board — Determination of bending stiffness — Resonance method |
BS ISO 3781:2011
|
Paper and board. Determination of tensile strength after immersion in water |
ISO 12192:2011
|
Paper and board — Determination of compressive strength — Ring crush method |
BS ISO 16260:2016
|
Paper and board. Determination of internal bond strength |
DIN EN ISO 12625-12 E : 2010
|
TISSUE PAPER AND TISSUE PRODUCTS - PART 12: DETERMINATION OF TENSILE STRENGTH OF PERFORATED LINES - CALCULATION OF PERFORATION EFFICIENCY |
ISO 16532-3:2010
|
Paper and board — Determination of grease resistance — Part 3: Turpentine test for voids in glassine and greaseproof papers |
UNI ISO 11108 : 2011
|
INFORMATION AND DOCUMENTATION - ARCHIVAL PAPER - REQUIREMENTS FOR PERMANENCE AND DURABILITY |
DIN ISO 16260 E : 2017
|
PAPER AND BOARD - DETERMINATION OF INTERNAL BOND STRENGTH (ISO 16260:2016) |
BS ISO 11556:2005
|
Paper and board. Determination of curl using a single vertically suspended test piece |
00/562030 DC : DRAFT MAY 2000
|
ISO 17190-6 - POLYMER-BASED ABSORBENT MATERIALS - MEASUREMENT OF CHARACTERISTICS - PART 6: GRAVIMETRIC DETERMINATION OF FLUID RETENTION CAPACITY IN SALINE AFTER CENTRIFUGATION |
DIN ISO 11476:2017-10
|
PAPER AND BOARD - DETERMINATION OF CIE WHITENESS, C/2 DEGREES (INDOOR ILLUMINATION CONDITIONS) (ISO 11476:2016) |
ISO 2834-3:2008
|
Graphic technology Laboratory preparation of test prints Part 3: Screen printing inks |
DIN ISO 15592-2:2005-05
|
Fine-cut tobacco and smoking articles made from it - Methods of sampling, conditioning and analysis - Part 2: Atmosphere for conditioning and testing (ISO 15592-2:2001) |
06/30159593 DC : 0
|
BS ISO/IEC 15457-3 - IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
BS ISO 2470-2:2008
|
Paper, board and pulps. Measurement of diffuse blue reflectance factor Outdoor daylight conditions (D65 brightness) |
ISO 8791-3:2017
|
Paper and board — Determination of roughness/smoothness (air leak methods) — Part 3: Sheffield method |
16/30325457 DC : 0
|
BS ISO 8791-3 - PAPER AND BOARD - DETERMINATION OF ROUGHNESS/SMOOTHNESS (AIR LEAK METHODS) - PART 3: SHEFFIELD METHOD |
BS ISO 5269-1 : 1998 AMD 13456
|
PULPS - PREPARATION OF LABORATORY SHEETS FOR PHYSICAL TESTING - CONVENTIONAL SHEET-FORMER METHOD |
BS ISO 3783:2006
|
Paper and board. Determination of resistance to picking. Accelerated speed method using the IGT-type tester (electric model) |
DIN ISO 3039:2011-06
|
Corrugated fibreboard - Determination of grammage of the component papers after separation (ISO 3039:2010) |
12/30242237 DC : 0
|
BS ISO 8791-2 - PAPER AND BOARD - DETERMINATION OF ROUGHNESS/SMOOTHNESS (AIR LEAK METHODS) - PART 2: BENDTSEN METHOD |
BS ISO 16945:2014
|
Corrugating medium. Determination of the edge crush resistance after laboratory fluting |
07/30162477 DC : 0
|
BS ISO 5269-3 - PULPS - PREPARATION OF LABORATORY SHEETS FOR PHYSICAL TESTING - PART 3: CONVENTIONAL AND RAPID-KOETHEN SHEET FORMERS USING A CLOSED WATER SYSTEM |
DIN ISO 1924-3:2007-06
|
Paper and board - Determination of tensile properties - Part 3: Constant rate of elongation method (100 mm/min) (ISO 1924-3:2005) |
10/30202469 DC : 0
|
BS ISO 12192 - PAPER AND BOARD - DETERMINATION OF COMPRESSIVE STRENGTH - RING CRUSH METHOD |
13/30230645 DC : 0
|
BS ISO 16260 - PAPER AND BOARD - DETERMINATION OF INTERNAL BOND STRENGTH |
DD ENV 12625-2:1999
|
Tissue paper and tissue products Procedures for sampling and conditioning |
AAMI ISO 11140-4 : 2007
|
STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 4: CLASS 2 INDICATORS AS AN ALTERNATIVE TO THE BOWIE AND DICK-TYPE TEST FOR DETECTION OF STEAM PENETRATION |
BS ISO 15592-2:2001
|
Fine-cut tobacco and smoking articles made from it. Methods of sampling, conditioning and analysis Atmosphere for conditioning and testing |
UNI ISO 5636-5 : 2014
|
PAPER AND BOARD - DETERMINATION OF AIR PERMEANCE (MEDIUM RANGE) - PART 5: GURLEY METHOD |
BS ISO 14968:1999
|
Paper and board. Cut-size office paper. Measurement of curl in a pack of sheets |
09/30173892 DC : 0
|
BS ISO 16532-3 - PAPER AND BOARD - DETERMINATION OF GREASE RESISTANCE - PART 3: TURPENTINE TEST FOR VOIDS IN GLASSINE AND GREASEPROOF PAPERS |
CAN/CSA-Z5100-17
|
Cellulose nanomaterials - Test methods for characterization |
ISO 5636-3:2013
|
Paper and board — Determination of air permeance (medium range) — Part 3: Bendtsen method |
ISO/TS 17958:2013
|
Paper and board — Determination of fracture toughness — Constant rate of elongation method (1,7 mm/s) |
BS EN 12131:1998
|
Feather and down. Test methods. Determination of the quantitive composition of feather and down (manual method) |
ISO 22414:2004
|
Paper — Cut-size office paper — Measurement of edge quality |
I.S. EN ISO 1974:2012
|
PAPER - DETERMINATION OF TEARING RESISTANCE - ELMENDORF METHOD (ISO 1974:2012) |
I.S. EN ISO 217:2013
|
PAPER - UNTRIMMED SIZES - DESIGNATION AND TOLERANCES FOR PRIMARY AND SUPPLEMENTARY RANGES, AND INDICATION OF MACHINE DIRECTION (ISO 217:2013) |
I.S. EN ISO 3035:2011
|
CORRUGATED FIBREBOARD - DETERMINATION OF FLAT CRUSH RESISTANCE (ISO 3035:2011) |
ISO 2528:2017
|
Sheet materials — Determination of water vapour transmission rate (WVTR) — Gravimetric (dish) method |
DIN EN ISO 12625-11:2013-04
|
TISSUE PAPER AND TISSUE PRODUCTS - PART 11: DETERMINATION OF WET BALL BURST STRENGTH (ISO 12625-11:2012) |
ISO 11476:2016
|
Paper and board Determination of CIE whiteness, C/2 (indoor illumination conditions) |
ISO 19594:2017
|
Graphic technology Test method for the determination of the binding strength for perfect-bound products Page-pull test working upwards |
ISO 11140-5:2007
|
Sterilization of health care products — Chemical indicators — Part 5: Class 2 indicators for Bowie and Dick-type air removal tests |
ISO 14968:1999
|
Paper and board Cut-size office paper Measurement of curl in a pack of sheets |
UNE-EN ISO 12625-16:2015
|
Tissue paper and tissue products - Part 16: Determination of optical properties - Opacity (paper backing) - Diffuse reflectance method (ISO 12625-16:2015) |
ISO 3039:2010
|
Corrugated fibreboard Determination of grammage of the component papers after separation |
UNE-ISO 8787:2012
|
Paper and board. Determination of capillary rise. Klemm method |
ISO 2493-2:2011
|
Paper and board Determination of bending resistance Part 2: Taber-type tester |
ISO 3037:2013
|
Corrugated fibreboard — Determination of edgewise crush resistance (unwaxed edge method) |
ISO 12625-7:2014
|
Tissue paper and tissue products Part 7: Determination of optical properties Measurement of brightness and colour with D65/10 (outdoor daylight) |
EN ISO 12625-7:2014
|
Tissue paper and tissue products - Part 7: Determination of optical properties - Measurement of brightness and colour with D65/10° (outdoor daylight) (ISO 12625-7:2014) |
DIN EN ISO 8254-1 E : 2009
|
PAPER AND BOARD - MEASUREMENT OF SPECULAR GLOSS - PART 1: 75 DEGREE GLOSS WITH A CONVERGING BEAM, TAPPI METHOD |
DIN EN ISO 11140-4:2007-07
|
Sterilization of health care products - Chemical indicators - Part 4: Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration (ISO 11140-4:2007) |
DIN EN ISO 11140-3:2009-09
|
STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 3: CLASS 2 INDICATOR SYSTEMS FOR USE IN THE BOWIE AND DICK-TYPE STEAM PENETRATION TEST |
UNE-EN 868-7:2017
|
Packaging for terminally sterilized medical devices - Part 7: Adhesive coated paper for low temperature sterilization processes - Requirements and test methods |
BS EN 867-5:2001
|
Non-biological systems for use in sterilizers Specification for indicator systems and process challenge devices for use in performance testing for small sterilizers Type B and Type S |
ISO 2759:2014
|
Board — Determination of bursting strength |
BS EN ISO 5270:2012
|
Pulps. Laboratory sheets. Determination of physical properties |
UNE-EN 868-2:2017
|
Packaging for terminally sterilized medical devices - Part 2: Sterilization wrap - Requirements and test methods |
BS EN ISO 8254-1:2009
|
Paper and board. Measurement of specular gloss 75 degree gloss with a converging beam, TAPPI method |
UNE-EN ISO 12625-7:2015
|
Tissue paper and tissue products - Part 7: Determination of optical properties - Measurement of brightness and colour with D65/10° (outdoor daylight) (ISO 12625-7:2014) |
BS EN 868-3:2017
|
Packaging for terminally sterilized medical devices Paper for use in the manufacture of paper bags (specified in EN 868-4) and in the manufacture of pouches and reels (specified in EN 868-5). Requirements and test methods |
BS EN ISO 8254-2:2003
|
Paper and board. Measurement of specular gloss 75° gloss with a parallel beam, DIN method |
UNE-EN 868-6:2017
|
Packaging for terminally sterilized medical devices - Part 6: Paper for low temperature sterilization processes - Requirements and test methods |
BS EN 1164:1999
|
Feather and down. Test methods. Determination of the turbidity of an aqueous extract |
BS EN ISO 12625-4:2016
|
Tissue paper and tissue products Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption |
BS EN 12132-2:1999
|
Feather and down. Methods of testing the down-proof properties of fabrics Impact test |
BS EN ISO 2759:2014
|
Board. Determination of bursting strength |
I.S. EN ISO 12625-9:2015
|
TISSUE PAPER AND TISSUE PRODUCTS - PART 9: DETERMINATION OF BALL BURST STRENGTH (ISO 12625-9:2015) |
EN 12281:2002
|
Printing and business paper - Requirements for copy paper for dry toner imaging processes |
DIN EN 868-2:2017-05
|
PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: STERILIZATION WRAP - REQUIREMENTS AND TEST METHODS |
ONORM EN ISO 12625-7 : 2014
|
TISSUE PAPER AND TISSUE PRODUCTS - PART 7: DETERMINATION OF OPTICAL PROPERTIES - MEASUREMENT OF BRIGHTNESS AND COLOUR WITH D65/10 DEGREE (OUTDOOR DAYLIGHT) (ISO 12625-7:2014) |
DIN ISO 5630-5:2017-03
|
Paper and board - Accelerated ageing - Part 5: Exposure to elevated temperature at 100 ?C (ISO 5630-5:2008) |
EN ISO 12625-5:2016
|
Tissue paper and tissue products - Part 5: Determination of wet tensile strength (ISO 12625-5:2016) |
EN 12956:1999/A1:2001
|
WALLCOVERINGS IN ROLL FORM - DETERMINATION OF DIMENSIONS, STRAIGHTNESS, SPONGEABILITY AND WASHABILITY |
DIN EN ISO 217:2013-12
|
PAPER - UNTRIMMED SIZES - DESIGNATION AND TOLERANCES FOR PRIMARY AND SUPPLEMENTARY RANGES, AND INDICATION OF MACHINE DIRECTION (ISO 217:2013) |
EN 12283:2002
|
Printing and business paper - Determination of toner adhesion |
EN 1163:1996
|
Feather and down - Test methods - Determination of the oil and fat content |
EN 13543:2001
|
Manufactured articles filled with feather and down - Measurement of water absorption of filling material |
EN ISO 12625-6:2016
|
Tissue paper and tissue products - Part 6: Determination of grammage (ISO 12625-6:2016) |
EN 1167:1996
|
Feather and down - Method of test for measuring the sizes of quilts filled with feather and/or down |
DIN EN ISO 534:2012-02
|
Paper and board - Determination of thickness, density and specific volume (ISO 534:2011) |
EN 13186:2004
|
Feather and down - Specification for feather and down filled bedding articles |
EN ISO 12625-4:2016
|
Tissue paper and tissue products - Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption (ISO 12625-4:2016) |
EN 1165:1996
|
Feather and down - Test methods - Determination of water-soluble chlorides |
EN 12149:1997
|
Wallcoverings in roll form - Determination of migration of heavy metals and certain other elements, of vinyl chloride monomer and of formaldehyde release |
EN 13542:2001
|
Manufactured articles filled with feather and down - Method for determining the compressibility index of clothing |
BS EN ISO 291:2008
|
Plastics. Standard atmospheres for conditioning and testing |
NF EN ISO 216 : 2007
|
WRITING PAPER AND CERTAIN CLASSES OF PRINTED MATTER - TRIMMED SIZES - A AND B SERIES, AND INDICATION OF MACHINE DIRECTION |
ONORM EN ISO 12625-12 : 2010
|
TISSUE PAPER AND TISSUE PRODUCTS - PART 12: DETERMINATION OF TENSILE STRENGTH OF PERFORATED LINES - CALCULATION OF PERFORATION EFFICIENCY |
ONORM EN ISO 535 : 2014
|
PAPER AND BOARD - DETERMINATION OF WATER ABSORPTIVENESS - COBB METHOD (ISO 535:2014) |
ONORM EN ISO 3037 : 2013
|
CORRUGATED FIBREBOARD - DETERMINATION OF EDGEWISE CRUSH RESISTANCE (UNWAXED EDGE METHOD) (ISO 3037:2013) |
UNE-EN ISO 217:2013
|
Paper - Untrimmed sizes - Designation and tolerances for primary and supplementary ranges, and indication of machine direction (ISO 217:2013) |
DIN ISO 3034 E : 2016
|
CORRUGATED FIBREBOARD - DETERMINATION OF SINGLE SHEET THICKNESS (ISO 3034:2011) |
13/30272957 DC : 0
|
BS EN ISO 12625-3 - TISSUE PAPER AND TISSUE PRODUCTS - PART 3: DETERMINATION OF THICKNESS, BULKING THICKNESS AND APPARENT BULK DENSITY |
BS ISO 8791-3:2017
|
Paper and board. Determination of roughness/smoothness (air leak methods) Sheffield method |
07/30130569 DC : 0
|
BS ISO 22754 - PULP AND PAPER - DETERMINATION OF THE EFFECTIVE RESIDUAL INK CONCENTRATION (ERIC NUMBER) BY INFRARED REFLECTANCE MEASUREMENT |
ISO 3783:2006
|
Paper and board — Determination of resistance to picking — Accelerated speed method using the IGT-type tester (electric model) |
ISO 17190-8:2001
|
Urine-absorbing aids for incontinence Test methods for characterizing polymer-based absorbent materials Part 8: Gravimetric determination of flowrate |
BS EN ISO 217:2013
|
Paper. Untrimmed sizes. Designation and tolerances for primary and supplementary ranges, and indication of machine direction |
BS ISO 13821:2001
|
Corrugated fibreboard. Determination of edgewise crush resistance. Waxed edge method |
ISO 1924-3:2005
|
Paper and board Determination of tensile properties Part 3: Constant rate of elongation method (100 mm/min) |
15/30274545 DC : 0
|
BS ISO 18522 - PAPER AND BOARD - AUTOMATED OFF-LINE TESTING OF PHYSICAL PROPERTIES FOR CD (CROSS DIRECTION) PROFILES |
DIN ISO 5630-4 E : 2017
|
PAPER AND BOARD - ACCELERATED AGEING - PART 4: DRY HEAT TREATMENT AT 120 OR 150 DEGREES C (ISO 5630-4:1986) |
12/30196194 DC : 0
|
BS ISO 5636-5 - PAPER AND BOARD - DETERMINATION OF AIR PERMEANCE AND AIR RESISTANCE (MEDIUM RANGE) - PART 5: GURLEY METHOD |
BS ISO 5626:1993
|
Paper. Determination of folding endurance |
ISO 16945:2014
|
Corrugating medium Determination of the edge crush resistance after laboratory fluting |
UNE-ISO 2965:2011
|
Materials used as cigarette papers, filter plug wrap and filter joining paper, including materials having an oriented permeable zone -- Determination of air permeability |
15/30323949 DC : 0
|
BS EN ISO 12625-4 - TISSUE PAPER AND TISSUE PRODUCTS - PART 4: DETERMINATION OF TENSILE STRENGTH, STRETCH AT MAXIMUM FORCE AND TENSILE ENERGY ABSORPTION |
15/30323953 DC : 0
|
BS EN ISO 12625-5 - TISSUE PAPER AND TISSUE PRODUCTS - PART 5: DETERMINATION OF WET TENSILE STRENGTH |
BS ISO 16532-3:2010
|
Paper and board. Determination of grease resistance Turpentine test for voids in glassine and greaseproof papers |
DIN EN ISO 3035:2012-02
|
Corrugated fibreboard - Determination of flat crush resistance (ISO 3035:2011) |
I.S. EN 11140-4:2007
|
STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 4: CLASS 2 INDICATORS AS AN ALTERNATIVE TO THE BOWIE AND DICK-TYPE TEST FOR DETECTION OF STEAM PENETRATION |
BS ISO 15361:2000
|
Pulps. Determination of zero-span tensile strength, wet or dry |
NF EN ISO 12625-12 : 2010
|
TISSUE PAPER AND TISSUE PRODUCTS - PART 12: DETERMINATION OF TENSILE STRENGTH OF PERFORATED LINES - CALCULATION OF PERFORATION EFFICIENCY |
ISO 5630-5:2008
|
Paper and board — Accelerated ageing — Part 5: Exposure to elevated temperature at 100 degrees C |
07/30166924 DC : DRAFT AUG 2007
|
BS EN 868-2 - PACKAGING MATERIALS FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: STERILIZATION WRAP - REQUIREMENTS AND TEST METHODS |
BS EN ISO 1974:2012
|
Paper. Determination of tearing resistance. Elmendorf method |
BS ISO 11108:1996
|
Information and documentation. Archival paper. Requirements for permanence and durability |
PREN 868-7 : DRAFT 2015
|
PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 7: ADHESIVE COATED PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS |
BS EN ISO 12625-12:2010
|
Tissue paper and tissue products Determination of tensile strength of perforated lines. Calculation of perforation efficiency |
BS EN ISO 12625-16:2015
|
Tissue paper and tissue products Determination of optical properties. Opacity (paper backing). Diffuse reflectance method |
BS ISO 16762:2016
|
Graphic technology. Post-press. General requirements for transfer, handling and storage |
I.S. EN ISO 535:2014
|
PAPER AND BOARD - DETERMINATION OF WATER ABSORPTIVENESS - COBB METHOD (ISO 535:2014) |
DIN ISO 2965:2012-07
|
Materials used as cigarette papers, filter plug wrap and filter joining paper, including materials having a discrete or oriented permeable zone and materials with bands of differing permeability - Determination of air permeability (ISO 2965:2009) |
UNE-ISO 15754:2012
|
Paper and board - Determination of z-directional tensile strength |
UNE-ISO 12192:2017
|
Paper and board. Determination of compressive strength. Ring crush method |
BS ISO 11476:2010
|
Paper and board. Determination of CIE whiteness, C/2° (indoor illumination conditions) |
10/30202472 DC : 0
|
BS ISO 3035 - CORRUGATED FIBREBOARD - DETERMINATION OF FLAT CRUSH RESISTANCE |
00/562033 DC : DRAFT MAY 2000
|
ISO 17190-9 - POLYMER-BASED ABSORBENT MATERIALS - MEASUREMENT OF CHARACTERISTICS - PART 9: GRAVIMETRIC DETERMINATION OF DENSITY |
16/30309800 DC : 0
|
BS ISO 12647-7 - GRAPHIC TECHNOLOGY - PROCESS CONTROL FOR THE PRODUCTION OF HALF-TONE COLOUR SEPARATIONS, PROOF AND PRODUCTION PRINTS - PART 7: PROOFING PROCESSES WORKING DIRECTLY FROM DIGITAL DATA |
08/30182464 DC : DRAFT JUNE 2008
|
BS ISO 20370 - MATERIAL USED FOR PRODUCING WRAPPINGS FOR CIGARETTE FILTERS, CIGARETTES AND OTHER TOBACCO PRODUCTS - DETERMINATION OF ACETATE CONTENT |
BS ISO 12192:2011
|
Paper and board. Determination of compressive strength. Ring crush method |
BS ISO 5636-4:2013
|
Paper and board. Determination of air permeance (medium range) Sheffield method |
BS ISO 16532-2:2007
|
Paper and board. Determination of grease resistance Surface repellency test |
DIN EN ISO 535:2014-06
|
Paper and board - Determination of water absorptiveness - Cobb method (ISO 535:2014) |
NF ISO 2493-2 : 2011
|
PAPER AND BOARD - DETERMINATION OF BENDING RESISTANCE - PART 2: TABER-TYPE TESTER |
BS ISO 5636-3:2013
|
Paper and board. Determination of air permeance (medium range) Bendtsen method |
05/30094664 DC : DRAFT JAN 2005
|
ISO 216 - WRITING PAPER AND CERTAIN CLASSES OF PRINTED MATTER - TRIMMED SIZES - A AND B SERIES |
CAN/CSA-ISO 11140-3:18
|
Sterilization of health care products — Chemical indicators — Part 3: Class 2 indicator systems for use in the Bowie and Dick-type steam penetration test (Adopted ISO 11140-3:2007, second edition, 2007-03-15, including technical corrigendum 1:2007) |
00/562035 DC : DRAFT MAY 2000
|
ISO 17190-11 - POLYMER-BASED ABSORBENT MATERIALS - MEASUREMENT OF CHARACTERISATION - PART 11: DETERMINATION OF CONTENT OF RESPIRABLE PARTICLES |
09/30181245 DC : 0
|
BS ISO 3039 - CORRUGATED FIBREBOARD - DETERMINATION OF GRAMMAGE OF THE COMPONENT PAPERS AFTER SEPARATION |
12/30252903 DC : 0
|
BS ISO 15397 - GRAPHIC TECHNOLOGY - COMMUNICATION OF GRAPHIC PAPER PROPERTIES |
ISO 15359:1999
|
Paper and board Determination of the static and kinetic coefficients of friction Horizontal plane method |
AAMI ISO 11140-5 : 2007
|
STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 5: CLASS 2 INDICATORS FOR BOWIE AND DICK-TYPE AIR REMOVAL TESTS |
03/316095 DC : DRAFT OCT 2003
|
BS ISO 1924-3 - PAPER AND BOARD - TENSILE STRENGTH, STRAIN AT BREAK, TENSILE ENERGY ABSORPTION AND TENSILE STIFFNESS - PART 3: CONSTANT RATE OF ELONGATION METHOD (100 MM/MIN) |
03/310719 DC : DRAFT JUNE 2003
|
ISO 12625-5 - TISSUE PAPER AND TISSUE PRODUCTS - PART 5: DETERMINATION OF WET TENSILE STRENGTH |
ISO 8791-4:2007
|
Paper and board Determination of roughness/smoothness (air leak methods) Part 4: Print-surf method |
ISO 1924-1:1992
|
Paper and board Determination of tensile properties Part 1: Constant rate of loading method |
03/305959 DC : DRAFT MAY 2003
|
EN 60332-1-3 ED. 1 - TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 1-3: TEST FOR VERTICAL FLAME PROPAGATION FOR A SINGLE INSULATED WIRE OR CABLE - PROCEDURE FOR DETERMINATION OF FLAMING DROPLETS/ PARTICLES |
06/30144858 DC : DRAFT JAN 2006
|
ISO 2965 - MATERIALS USED AS CIGARETTE PAPERS, FILTER PLUG WRAP AND FILTER JOINING PAPER, INCLUDING MATERIALS HAVING AN ORIENTED PERMEABLE ZONE - DETERMINATION OF AIR PERMEABILITY |
AAMI ISO 11140-4 : 2007 : R2012
|
STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 4: CLASS 2 INDICATORS AS AN ALTERNATIVE TO THE BOWIE AND DICK-TYPE TEST FOR DETECTION OF STEAM PENETRATION |
I.S. EN ISO 7263:2011
|
CORRUGATING MEDIUM - DETERMINATION OF THE FLAT CRUSH RESISTANCE AFTER LABORATORY FLUTING |
ISO 17190-1:2001
|
Urine-absorbing aids for incontinence Test methods for characterizing polymer-based absorbent materials Part 1: Determination of pH |
UNI CEN/TS 15968 : 2010
|
Determination of extractable perfluoro octane sulfonate (PFOS) in solid, coated and impregnated articles, in liquids and fire-fighting foams - Method for sampling, extraction and analysis by means of LC-qMS or LC-MS |
ISO 9416:2017
|
Paper — Determination of light scattering and absorption coefficients (using Kubelka-Munk theory) |
UNE-ISO 5636-3:2015
|
Paper and board. Determination of air permeance (medium range). Part 3: Bendtsen method |
BS 1248-3:1990
|
Wallcoverings in roll form Specification for wallcoverings for subsequent decoration |
BS ISO 5628:2012
|
Paper and board. Determination of bending stiffness. General principles for two-point, three-point and four-point methods |
I.S. EN ISO 12625-16:2015
|
TISSUE PAPER AND TISSUE PRODUCTS - PART 16: DETERMINATION OF OPTICAL PROPERTIES - OPACITY (PAPER BACKING) - DIFFUSE REFLECTANCE METHOD (ISO 12625-16:2015) |
ISO 5631-3:2015
|
Paper and board — Determination of colour by diffuse reflectance — Part 3: Indoor illumination conditions (D50/2 degrees) |
ISO 2493-1:2010
|
Paper and board Determination of bending resistance Part 1: Constant rate of deflection |
ISO 16260:2016
|
Paper and board — Determination of internal bond strength |
UNI EN ISO 12625-11 : 2013
|
TISSUE PAPER AND TISSUE PRODUCTS - PART 11: DETERMINATION OF WET BALL BURST STRENGTH |
PREN 868-3 : DRAFT 2015
|
PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 3: PAPER FOR USE IN THE MANUFACTURE OF PAPER BAGS (SPECIFIED IN EN 868-4) AND IN THE MANUFACTURE OF POUCHES AND REELS (SPECIFIED IN EN 868-5) - REQUIREMENTS AND TEST METHODS |
EN ISO 12625-11:2012
|
Tissue paper and tissue products - Part 11: Determination of wet ball burst strength (ISO 12625-11:2012) |
EN 13088:2001
|
MANUFACTURED ARTICLES FILLED WITH FEATHER AND DOWN - METHOD FOR THE DETERMINATION OF A FILLED PRODUCT'S TOTAL MASS AND OF THE MASS OF THE FILLING |
ISO 12625-3:2014
|
Tissue paper and tissue products Part 3: Determination of thickness, bulking thickness and apparent bulk density and bulk |
DIN EN 13186:2005-02
|
Feather and down - Specification for feather and down filled bedding articles; German version EN 13186:2004 |
DIN EN ISO 534 E : 2012
|
PAPER AND BOARD - DETERMINATION OF THICKNESS, DENSITY AND SPECIFIC VOLUME (ISO 534:2011) |
DIN EN ISO 9706 E : 2010
|
INFORMATION AND DOCUMENTATION - PAPER FOR DOCUMENTS - REQUIREMENTS FOR PERMANENCE |
UNE-EN ISO 3037:2013
|
Corrugated fibreboard - Determination of edgewise crush resistance (unwaxed edge method) (ISO 3037:2013) |
UNE-EN ISO 536:2013
|
Paper and board - Determination of grammage (ISO 536:2012) |
BS EN 13855-1:2003
|
Manufactured articles solely filled with feathers and down. Measurement of thickness and compressibility of cushions Test method by rotation |
BS EN ISO 12625-5:2016
|
Tissue paper and tissue products Determination of wet tensile strength |
BS EN ISO 2758:2014
|
Paper. Determination of bursting strength |
BS EN 868-7:2017
|
Packaging for terminally sterilized medical devices Adhesive coated paper for low temperature sterilization processes. Requirements and test methods |
UNE-EN ISO 5270:2013
|
Pulps - Laboratory sheets - Determination of physical properties (ISO 5270:2012) |
DIN EN 14035-24:2004-11
|
FIREWORKS - PART 24: NOVELTY MATCHES - SPECIFICATION AND TEST METHODS |
I.S. EN ISO 12625-3:2014
|
TISSUE PAPER AND TISSUE PRODUCTS - PART 3: DETERMINATION OF THICKNESS, BULKING THICKNESS AND APPARENT BULK DENSITY AND BULK (ISO 12625-3:2014) |
DIN EN 14035-25:2006-01
|
FIREWORKS - PART 25: PARTY POPPERS - SPECIFICATION AND TEST METHODS |
I.S. EN ISO 12625-7:2014
|
TISSUE PAPER AND TISSUE PRODUCTS - PART 7: DETERMINATION OF OPTICAL PROPERTIES - MEASUREMENT OF BRIGHTNESS AND COLOUR WITH D65/10 DEGREE (OUTDOOR DAYLIGHT) (ISO 12625-7:2014) |
I.S. EN 868-3:2017
|
PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 3: PAPER FOR USE IN THE MANUFACTURE OF PAPER BAGS (SPECIFIED IN EN 868-4) AND IN THE MANUFACTURE OF POUCHES AND REELS (SPECIFIED IN EN 868-5) - REQUIREMENTS AND TEST METHODS |
I.S. EN ISO 11140-3:2009
|
STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 3: CLASS 2 INDICATOR SYSTEMS FOR USE IN THE BOWIE AND DICK-TYPE STEAM PENETRATION TEST |
I.S. EN 868-7:2017
|
PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 7: ADHESIVE COATED PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS |
I.S. EN ISO 291:2008
|
PLASTICS - STANDARD ATMOSPHERES FOR CONDITIONING AND TESTING |
I.S. EN ISO 5269-2:2005
|
PULPS - PREPARATION OF LABORATORY SHEETS FOR PHYSICAL TESTING - PART 2: RAPID-KOTHEN METHOD |
DIN EN 14035-8:2004-11
|
FIREWORKS - PART 8: BENGAL STICKS - SPECIFICATION AND TEST METHODS |
DIN EN 14035-7:2004-11
|
FIREWORKS - PART 7: BENGAL MATCHES - SPECIFICATION AND TEST METHODS |
I.S. EN ISO 12625-5:2016
|
TISSUE PAPER AND TISSUE PRODUCTS - PART 5: DETERMINATION OF WET TENSILE STRENGTH (ISO 12625-5:2016) |
DIN 53107:1982-05
|
DETERMINING THE SMOOTHNESS OF PAPER AND BOARD BY THE BEKK METHOD |
DIN 55468-1:1999-03
|
CORRUGATED FIBREBOARD - PART 1: REQUIREMENTS AND TESTING |
I.S. EN ISO 12625-8:2010
|
TISSUE PAPER AND TISSUE PRODUCTS - PART 8: WATER-ABSORPTION TIME AND WATER-ABSORPTION CAPACITY, BASKET-IMMERSION TEST METHOD |
I.S. EN ISO 1924-2:2009
|
PAPER AND BOARD - DETERMINATION OF TENSILE PROPERTIES - PART 2: CONSTANT RATE OF ELONGATION METHOD (20 MM/MIN) |
I.S. EN 868-6:2017
|
PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 6: PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS |
I.S. EN ISO 3037:2013
|
CORRUGATED FIBREBOARD - DETERMINATION OF EDGEWISE CRUSH RESISTANCE (UNWAXED EDGE METHOD) (ISO 3037:2013) |
I.S. EN ISO 8254-2:2016
|
PAPER AND BOARD - MEASUREMENT OF SPECULAR GLOSS - PART 2: 75 DEGREE GLOSS WITH A PARALLEL BEAM, DIN METHOD (ISO 8254-2:2016) |
I.S. EN ISO 12625-6:2016
|
TISSUE PAPER AND TISSUE PRODUCTS - PART 6: DETERMINATION OF GRAMMGE |
I.S. EN ISO 2758:2014
|
PAPER - DETERMINATION OF BURSTING STRENGTH (ISO 2758:2014) |
I.S. EN ISO 2759:2014
|
BOARD - DETERMINATION OF BURSTING STRENGTH (ISO 2759:2014) |
DIN EN 14035-29:2004-11
|
FIREWORKS - PART 29: SERPENTS - SPECIFICATION AND TEST METHODS |
I.S. EN ISO 5270:2012
|
PULPS - LABORATORY SHEETS - DETERMINATION OF PHYSICAL PROPERTIES (ISO 5270:2012) |
I.S. EN ISO 5269-1:2005
|
PULPS - PREPARATION OF LABORATORY SHEETS FOR PHYSICAL TESTING - PART 1: CONVENTIONAL SHEET-FORMER METHOD |
I.S. EN ISO 216:2007
|
WRITING PAPER AND CERTAIN CLASSES OF PRINTED MATTER - TRIMMED SIZES - A AND B SERIES, AND INDICATION OF MACHINE DIRECTION |
I.S. EN ISO 8254-1:2009
|
PAPER AND BOARD - MEASUREMENT OF SPECULAR GLOSS - PART 1: 75 DEGREE GLOSS WITH A CONVERGING BEAM, TAPPI METHOD |
I.S. EN ISO 534:2011
|
PAPER AND BOARD - DETERMINATION OF THICKNESS, DENSITY AND SPECIFIC VOLUME (ISO 534:2011) |
I.S. EN ISO 12625-4:2016
|
TISSUE PAPER AND TISSUE PRODUCTS - PART 4: DETERMINATION OF TENSILE STRENGTH, STRETCH AT BREAK AND TENSILE ENERGY ABSORPTION |
UNI ISO 16532-1 : 2009
|
PAPER AND BOARD - DETERMINATION OF GREASE RESISTANCE - PART 1: PERMEABILITY TEST |
ONORM EN ISO 5270 : 2013
|
PULPS - LABORATORY SHEETS - DETERMINATION OF PHYSICAL PROPERTIES (ISO 5270:2012) |
BS 3631:1984
|
Method for determination of ash of paper and board |
ONORM EN ISO 12625-15 : 2015
|
TISSUE PAPER AND TISSUE PRODUCTS - PART 15: DETERMINATION OF OPTICAL PROPERTIES - MEASUREMENT OF BRIGHTNESS AND COLOUR WITH C/2 DEGREES (INDOOR DAYLIGHT) ILLUMINANT (ISO 12625-15:2015) |
BS 5743:2000
|
Tobacco and tobacco products. Atmosphere for conditioning and testing |
ISO 15754:2009
|
Paper and board Determination of z-directional tensile strength |
BS ISO 5636-5:2013
|
Paper and board. Determination of air permeance (medium range) Gurley method |
DIN EN ISO 535 E : 2014
|
PAPER AND BOARD - DETERMINATION OF WATER ABSORPTIVENESS - COBB METHOD (ISO 535:2014) |
NF ISO 20370 : 2009
|
MATERIAL USED FOR PRODUCING WRAPPINGS FOR CIGARETTE FILTERS, CIGARETTES AND OTHER TOBACCO PRODUCTS - DETERMINATION OF ACETATE CONTENT |
ISO 8254-3:2016
|
Paper and board Measurement of specular gloss Part 3: 20 degree gloss with a converging beam, TAPPI method |
06/30159524 DC : 0
|
BS EN ISO 12625-10 - TISSUE PAPER AND TISSUE PRODUCTS - PART 10: DETERMINATION OF DEMAND WATER ABSORPTION RATE AND CAPACITY, UNDER CONTROLLED HYDRAULIC PRESSURE |
DIN EN ISO 1974:2012-09
|
Paper - Determination of tearing resistance - Elmendorf method (ISO 1974:2012) |
UNI ISO 2471 : 2009
|
PAPER AND BOARD - DETERMINATION OF OPACITY (PAPER BACKING) - DIFFUSE REFLECTANCE METHOD |
I.S. EN 14035-25:2005
|
FIREWORKS - PART 25: PARTY POPPERS - SPECIFICATION AND TEST METHODS |
16/30330102 DC : 0
|
BS ISO 16762 - GRAPHIC TECHNOLOGY - POST PRESS - GENERAL REQUIREMENTS FOR TRANSFER, HANDLING AND STORAGE |
I.S. EN ISO 12625-11:2012
|
TISSUE PAPER AND TISSUE PRODUCTS - PART 11: DETERMINATION OF WET BALL BURST STRENGTH (ISO 12625-11:2012) |
BS ISO 5636-6:2015
|
Paper and board. Determination of air permeance (medium range) Oken method |
14/30294441 DC : 0
|
BS ISO 2834-2 - GRAPHIC TECHNOLOGY - LABORATORY PREPARATION TEST PRINTS - PART 2: LIQUID PRINTING INKS |
BS ISO 2759 : 2001 AMD 14673
|
BOARD - DETERMINATION OF BURSTING STRENGTH |
00/562025 DC : DRAFT MAY 2000
|
ISO 17190-1 - POLYMER-BASED ABSORBENT MATERIALS - MEASUREMENT OF CHARACTERISTICS - PART 1: DETERMINATION OF PH |
BS 4415-2:1986
|
Determination of the tensile properties of paper and board Constant rate of elongation method |
ISO 16532-2:2007
|
Paper and board Determination of grease resistance Part 2: Surface repellency test |
ISO 2471:2008
|
Paper and board — Determination of opacity (paper backing) — Diffuse reflectance method |
11/30216364 DC : 0
|
BS EN ISO 1974 - PAPER - DETERMINATION OF TEARING RESISTANCE (ELMENDORF METHOD) |
BS 6388-3:1987
|
Accelerated ageing of paper and board Method for moist heat treatment at 80°C and 65% relative humidity |
BS ISO 9416:2017
|
Paper. Determination of light scattering and absorption coefficients (using Kubelka-Munk theory) |
BS ISO 11093-2:1994
|
Paper and board. Testing of cores Co-ordinating of test samples |
PD ISO/TS 17958:2013
|
Paper and board. Determination of fracture toughness. Constant rate of elongation method (1,7 mm/s) |
UNI EN ISO 12625-12 : 2010
|
TISSUE PAPER AND TISSUE PRODUCTS - PART 12: DETERMINATION OF TENSILE STRENGTH OF PERFORATED LINES - CALCULATION OF PERFORATION EFFICIENCY |
ISO 8787:1986
|
Paper and board — Determination of capillary rise — Klemm method |
NF ISO 3034 : 2011
|
CORRUGATED FIBREBOARD - DETERMINATION OF SINGLE SHEET THICKNESS |
BS ISO 5631-2:2015
|
Paper and board. Determination of colour by diffuse reflectance Outdoor daylight conditions (D65/10°) |
BS ISO 11605:1995
|
Paper and board. Calibration of variable-area flowmeters |
08/30130536 DC : DRAFT MAR 2008
|
BS ISO 2470-1 - PAPER, BOARD AND PULPS - MEASUREMENT OF DIFFUSE BLUE REFLECTANCE FACTOR - PART 1: INDOOR DAYLIGHT CONDITIONS (ISO BRIGHTNESS) |
10/30204991 DC : 0
|
BS ISO 534 - PAPER AND BOARD - DETERMINATION OF THICKNESS, DENSITY AND SPECIFIC VOLUME |
15/30323163 DC : 0
|
BS ISO 8254-3 - PAPER AND BOARD - MEASUREMENT OF SPECULAR GLOSS - PART 3: 20 DEGREE GLOSS WITH A CONVERGING BEAM, TAPPI METHOD |
BS ISO 15359:1999
|
Paper and board. Determination of the static and kinetic coefficients of friction. Horizontal plane method |
DIN ISO 11476 E : 2017
|
PAPER AND BOARD - DETERMINATION OF CIE WHITENESS, C/2 DEGREES (INDOOR ILLUMINATION CONDITIONS) (ISO 11476:2016) |
15/30323957 DC : 0
|
BS EN ISO 12625-6 - TISSUE PAPER AND TISSUE PRODUCTS - PART 6: DETERMINATION OF GRAMMAGE |
BS ISO 2493-2:2011
|
Paper and board. Determination of bending resistance Taber-type tester |
12/30213199 DC : 0
|
BS ISO 5636-3 - PAPER AND BOARD - DETERMINATION OF AIR PERMEANCE (MEDIUM RANGE) - PART 3: BENDTSEN METHOD |
09/30190545 DC : 0
|
BS ISO 2493-1 - PAPER AND BOARD - DETERMINATION OF BENDING RESISTANCE - PART 1: CONSTANT RATE OF DEFLECTION |
DIN ISO 20370:2012-10
|
Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products - Determination of acetate content (ISO 20370:2009) |
00/562031 DC : DRAFT MAY 2000
|
ISO 17190-7 - POLYMER-BASED ABSORBENT MATERIALS - MEASUREMENT OF CHARACTERISTICS - PART 7: GRAVIMETRIC DETERMINATION OF ABSORPTION UNDER PRESSURE |
08/30182461 DC : DRAFT JUNE 2008
|
BS ISO 20369 - MATERIAL USED FOR PRODUCING WRAPPINGS FOR CIGARETTE FILTERS, CIGARETTES AND OTHER TOBACCO PRODUCTS - DETERMINATION OF CITRATE CONTENT |
BS ISO 15397:2014
|
Graphic technology. Communication of graphic paper properties |
03/309339 DC : DRAFT JUNE 2003
|
ISO 5636-4 - PAPER AND BOARD - DETERMINATION OF AIR PERMEANCE (MEDIUM RANGE) - PART 4: SHEFFIELD METHOD |
BS ISO 4046-5:2016
|
Paper, board, pulps and related terms. Vocabulary Properties of pulp, paper and board |
DIN ISO 5630-6:2016-10 (Draft)
|
PAPER AND BOARD - ACCELERATED AGEING - PART 6: EXPOSURE TO ATMOSPHERIC POLLUTION (NITROGEN DIOXIDE) (ISO 5630-6:2009) |
08/30183287 DC : DRAFT JUNE 2008
|
BS ISO 12625-12 - TISSUE PAPER AND TISSUE PRODUCTS - PART 12: DETERMINATION OF TENSILE STRENGTH OF PERFORATED LINES - CALCULATION OF PERFORATION EFFICIENCY |
UNE-EN ISO 3035:2012
|
Corrugated fibreboard - Determination of flat crush resistance (ISO 3035:2011) |
07/30130545 DC : 0
|
BS ISO 8254-1 - PAPER AND BOARD - MEASUREMENT OF SPECULAR GLOSS - PART 1: 75 GLOSS WITH A CONVERGING BEAM, TAPPI METHOD |
BS ISO 20369:2009
|
Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products. Determination of citrate content |
BS ISO 12634:2017
|
Graphic technology. Determination of tack of paste inks and vehicles by a rotary tackmeter |
BS ISO 11140-5:2007
|
Sterilization of health care products. Chemical indicators Class 2 indicators for Bowie and Dick-type air removal tests |
BS ISO 19594:2017
|
Graphic technology. Test method for the determination of the binding strength for perfect-bound products. Page-pull test working upwards |
BS ISO 5630-7:2014
|
Paper and board. Accelerated ageing Exposure to light |
10/30196197 DC : 0
|
BS ISO 2493-2 - PAPER AND BOARD - DETERMINATION OF RESISTANCE TO BENDING - PART 2:TABER-TYPE TESTER |
ISO 13820:2014
|
Paper, board and corrugated fibreboard Description and calibration of compression-testing equipment |
BS ISO 3039:2010
|
Corrugated fibreboard. Determination of grammage of the component papers after separation |
BS ISO 22414:2004
|
Paper. Cut-size office paper. Measurement of edge quality |
UNE-ISO 5631-2:2015
|
Paper and board. Determination of colour by diffuse relfectance. Part 2: Outdoor daylight conditions (D65/10º) |
UNE-ISO 3039:2013
|
Corrugated fibreboard. Determination of the grammage of the component papers after separation |
AAMI ISO 11140-5 : 2007 : R2012
|
STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 5: CLASS 2 INDICATORS FOR BOWIE AND DICK-TYPE AIR REMOVAL TESTS |
ISO 11556:2005
|
Paper and board — Determination of curl using a single vertically suspended test piece |
PREN ISO 3037 : DRAFT 2013
|
CORRUGATED FIBREBOARD - DETERMINATION OF EDGEWISE CRUSH RESISTANCE (UNWAXED EDGE METHOD) (ISO/FDIS 3037:2013) |
ASTM D 7680 : 2010
|
Standard Practice for Preparing Prints of Paste Printing Inks by a Motor-Driven Printability Tester |
DIN ISO 15754:2010-04
|
Paper and board - Determination of z-directional tensile strength (ISO 15754:2009) |
ISO 5630-7:2014
|
Paper and board — Accelerated ageing — Part 7: Exposure to light |
ISO 8791-2:2013
|
Paper and board — Determination of roughness/smoothness (air leak methods) — Part 2: Bendtsen method |
UNI EN ISO 1974 : 2012
|
PAPER - DETERMINATION OF TEARING RESISTANCE - ELMENDORF METHOD |
ISO 17190-5:2001
|
Urine-absorbing aids for incontinence Test methods for characterizing polymer-based absorbent materials Part 5: Gravimetric determination of free swell capacity in saline solution |
ONORM EN ISO 12625-11 : 2013
|
TISSUE PAPER AND TISSUE PRODUCTS - PART 11: DETERMINATION OF WET BALL BURST STRENGTH (ISO 12625-11:2012) |
ISO 5636-4:2013
|
Paper and board — Determination of air permeance (medium range) — Part 4: Sheffield method |
ISO 15397:2014
|
Graphic technology Communication of graphic paper properties |
ISO/TS 20460:2015
|
Paper and board — Automated on-line testing — Metrological comparability between standardized measurements and output of on-line gauges |
BS ISO 2470-1:2016
|
Paper, board and pulps. Measurement of diffuse blue reflectance factor Indoor daylight conditions (ISO brightness) |
BS EN 12130:1998
|
Feather and down. Test methods. Determination of the filling power (massic volume) |
UNI EN ISO 535 : 2014
|
PAPER AND BOARD - DETERMINATION OF WATER ABSORPTIVENESS - COBB METHOD |
BS ISO 8254-3:2016
|
Paper and board. Measurement of specular gloss 20° gloss with a converging beam, TAPPI method |
ISO 16532-1:2008
|
Paper and board — Determination of grease resistance — Part 1: Permeability test |
ISO 17190-6:2001
|
Urine-absorbing aids for incontinence Test methods for characterizing polymer-based absorbent materials Part 6: Gravimetric determination of fluid retention capacity in saline solution after centrifugation |
BS 6427-1:1983
|
Conditioning of sacks for testing. Method for conditioning paper sacks |
PREN 868-2 : DRAFT 2015
|
PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: STERILIZATION WRAP - REQUIREMENTS AND TEST METHODS |
UNI ISO 2470-2 : 2010
|
PAPER, BOARD AND PULPS - MEASUREMENT OF DIFFUSE BLUE REFLECTANCE FACTOR - PART 2: OUTDOOR DAYLIGHT CONDITIONS (D65 BRIGHTNESS) |
NF EN ISO 3035 : 2011
|
CORRUGATED FIBREBOARD - DETERMINATION OF FLAT CRUSH RESISTANCE |
ISO 5631-1:2015
|
Paper and board — Determination of colour by diffuse reflectance — Part 1: Indoor daylight conditions (C/2 degrees) |
ISO 2470-1:2016
|
Paper, board and pulps Measurement of diffuse blue reflectance factor Part 1: Indoor daylight conditions (ISO brightness) |
ISO 7263:2011
|
Corrugating medium Determination of the flat crush resistance after laboratory fluting |
DIN EN ISO 536:2012-11
|
PAPER AND BOARD - DETERMINATION OF GRAMMAGE (ISO 536:2012) |
DIN EN ISO 7263:2011-05
|
CORRUGATING MEDIUM - DETERMINATION OF THE FLAT CRUSH RESISTANCE AFTER LABORATORY FLUTING |
DIN EN ISO 216 E : 2007
|
WRITING PAPER AND CERTAIN CLASSES OF PRINTED MATTER - TRIMMED SIZES - A AND B SERIES, AND INDICATION OF MACHINE DIRECTION |
DIN EN ISO 9706:2010-02
|
Information and documentation - Paper for documents - Requirements for permanence (ISO 9706:1994) |
BS EN 14035-25:2005
|
Fireworks Party poppers. Specification and test methods |
UNE-EN ISO 8254-2:2016
|
Paper and board - Measurement of specular gloss - Part 2: 75 degree gloss with a parallel beam, DIN method (ISO 8254-2:2016) |
ISO 11140-3:2007
|
Sterilization of health care products — Chemical indicators — Part 3: Class 2 indicator systems for use in the Bowie and Dick-type steam penetration test |
BS EN 259:1997
|
Wallcoverings in roll form. Specification for heavy duty wallcoverings |
BS EN 20534:1993
|
Method for determination of thickness and apparent bulk density or apparent sheet density of paper and board |
BS EN 13542:2001
|
Manufactured articles filled with feather and down. Method for determining the compressibility index of clothing |
BS EN ISO 12625-8:2010
|
Tissue paper and tissue products Water-absorption time and water-absorption capacity, basket-immersion test method |
BS EN 12149:1998
|
Wallcoverings in roll form. Determination of migration of heavy metals and certain other elements, of vinyl chloride monomer and of formaldehyde release |
BS EN 14035-7:2004
|
Fireworks Bengal matches. Specification and test methods |
BS EN 12956:1999
|
Wallcoverings in roll form. Determination of dimensions, straightness, spongeability and washability |
BS EN ISO 5269-2:2004
|
Pulps. Preparation of laboratory sheets for physical testing Rapid-Koethen method |
BS EN 13186:2004
|
Feather and down. Specification feather and down filled bedding articles |
BS EN 12281:2002
|
Printing and business paper. Requirements for copy paper for dry toner imaging processes |
UNE-EN 60332-1-3:2005
|
Tests on electric and optical fibre cables under fire conditions -- Part 1-3: Test for vertical flame propagation for a single insulated wire or cable - Procedure for determination of flaming droplets/particles |
UNE-EN ISO 12625-8:2011
|
Tissue paper and tissue products - Part 8: Water-absorption time and water-absorption capacity, basket-immersion test method (ISO 12625-8:2010) |
DIN EN ISO 536 E : 2012
|
PAPER AND BOARD - DETERMINATION OF GRAMMAGE (ISO 536:2012) |
EN 868-7:2017
|
Packaging for terminally sterilized medical devices - Part 7: Adhesive coated paper for low temperature sterilization processes - Requirements and test methods |
EN ISO 8254-2:2016
|
Paper and board - Measurement of specular gloss - Part 2: 75 degree gloss with a parallel beam, DIN method (ISO 8254-2:2016) |
ENV 12625-2 : DRAFT 1999
|
TISSUE PAPER AND TISSUE PRODUCTS - PART 2: PROCEDURES FOR SAMPLING AND CONDITIONING |
UNI EN ISO 7263 : 2011
|
CORRUGATING MEDIUM - DETERMINATION OF THE FLAT CRUSH RESISTANCE AFTER LABORATORY FLUTING |
UNI EN ISO 5270 : 2012
|
PULPS - LABORATORY SHEETS - DETERMINATION OF PHYSICAL PROPERTIES |
UNI EN ISO 11140-3 : 2009
|
STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 3: CLASS 2 INDICATOR SYSTEMS FOR USE IN THE BOWIE AND DICK-TYPE STEAM PENETRATION TEST |
UNI EN ISO 12625-8 : 2011
|
TISSUE PAPER AND TISSUE PRODUCTS - PART 8: WATER-ABSORPTION TIME AND WATER- ABSORPTION CAPACITY, BASKET-IMMERSION TEST METHOD |
BS 5381-4:1998
|
Methods for determination of physical properties of tobacco and tobacco products Determination of air permeability of materials used as cigarette papers, filter plug wrap and filter joining paper |
UNI EN ISO 12625-7 : 2014
|
TISSUE PAPER AND TISSUE PRODUCTS - PART 7: DETERMINATION OF OPTICAL PROPERTIES - MEASUREMENT OF BRIGHTNESS AND COLOUR WITH D65/10 DEGREES (OUTDOOR DAYLIGHT) |
UNI EN ISO 1924-2 : 2009
|
PAPER AND BOARD - DETERMINATION OF TENSILE PROPERTIES - PART 2: CONSTANT RATE OF ELONGATION METHOD (20 MM/MIN) |
UNI EN ISO 2758 : 2014
|
PAPER - DETERMINATION OF BURSTING STRENGTH |
UNI EN ISO 8254-1 : 2009
|
PAPER AND BOARD - MEASUREMENT OF SPECULAR GLOSS - PART 1: 75 DEGREE GLOSS WITH A CONVERGING BEAM, TAPPI METHOD |
UNI EN ISO 534 : 2012
|
PAPER AND BOARD - DETERMINATION OF THICKNESS, DENSITY AND SPECIFIC VOLUME |
UNI EN ISO 291 : 2008
|
PLASTICS - STANDARD ATMOSPHERES FOR CONDITIONING AND TESTING |
UNI EN ISO 3037 : 2013
|
CORRUGATED FIBREBOARD - DETERMINATION OF EDGEWISE CRUSH RESISTANCE (UNWAXED EDGE METHOD) |
UNI EN ISO 2759 : 2014
|
BOARD - DETERMINATION OF BURSTING STRENGTH |
UNI EN ISO 12625-3 : 2014
|
TISSUE PAPER AND TISSUE PRODUCTS - PART 3: DETERMINATION OF THICKNESS, BULKING THICKNESS AND APPARENT BULK DENSITY AND BULK |
03/309373 DC : DRAFT JUNE 2003
|
ISO 12625-3 - TISSUE PAPER AND TISSUE PRODUCTS - PART 3: DETERMINATION OF THICKNESS, BULKING THICKNESS AND APPARENT BULK DENSITY |
UNE-ISO 9416:2011
|
Paper - Determination of light scattering and absorption coefficients (using Kubelka-Munk theory) |
DIN EN ISO 12625-15:2015-05
|
TISSUE PAPER AND TISSUE PRODUCTS - PART 15: DETERMINATION OF OPTICAL PROPERTIES - MEASUREMENT OF BRIGHTNESS AND COLOUR WITH C/2 (INDOOR DAYLIGHT) ILLUMINANT (ISO 12625-15:2015) |
UNI ISO 5636-4 : 2014
|
PAPER AND BOARD - DETERMINATION OF AIR PERMEANCE (MEDIUM RANGE) - PART 4: SHEFFIELD METHOD |
11/30240486 DC : 0
|
BS EN 16256-5 - PYROTECHNIC ARTICLES - THEATRICAL PYROTECHNIC ARTICLES - PART 5: TEST METHODS |
BS ISO 2493-1:2010
|
Paper and board. Determination of bending resistance Constant rate of deflection |
15/30325855 DC : 0
|
BS EN 868-2 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: STERILIZATION WRAP - REQUIREMENTS AND TEST METHODS |
DIN ISO 3781:2012-07
|
Paper and board - Determination of tensile strength after immersion in water (ISO 3781:2011) |
ISO 12634:2017
|
Graphic technology — Determination of tack of paste inks and vehicles by a rotary tackmeter |
00/562029 DC : DRAFT MAY 2000
|
ISO 17190-5 - POLYMER-BASED ABSORBENT MATERIALS - MEASUREMENT OF CHARACTERISTICS - PART 5: GRAVIMETRIC DETERMINATION OF FREE SWELL CAPACITY IN SALINE |
07/30128549 DC : 0
|
BS ISO 2834-3 - GRAPHIC TECHNOLOGY - LABORATORY PREPARATION TEST PRINTS - PART 3: SCREEN PRINTING INKS |
PD ISO/TR 12705:2011
|
Graphic technology. Laboratory test method for chemical ghosting in lithography |
CAN/CSA-ISO 11140-4:18
|
CAN/CSA-ISO 11140-4:18 - Sterilization of health care products — Chemical indicators — Part 4: Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration (Adopted ISO 11140-4:2007, second edition, 2007-03-15) |
PD 6577:1995
|
The influence of environmental conditions on the testing of textile materials |
03/319401 DC : DRAFT NOV 2003
|
BS EN 14035-25 - FIREWORKS - PART 25: PARTY POPPERS - SPECIFICATION AND TEST METHODS |
ISO 3034:2011
|
Corrugated fibreboard — Determination of single sheet thickness |
BS ISO 20370:2009
|
Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products. Determination of acetate content |
PD CEN/TS 15968:2010
|
Determination of extractable perfluorooctanesulphonate (PFOS) in coated and impregnated solid articles, liquids and fire fighting foams. Method for sampling, extraction and analysis by LCqMS or LC-tandem/MS |
DIN EN ISO 217 E : 2013
|
PAPER - UNTRIMMED SIZES - DESIGNATION AND TOLERANCES FOR PRIMARY AND SUPPLEMENTARY RANGES, AND INDICATION OF MACHINE DIRECTION (ISO 217:2013) |
06/30145155 DC : DRAFT JAN 2006
|
ISO 16532-2 - PAPER AND BOARD - DETERMINATION OF GREASE RESISTANCE - PART 2: SURFACE REPELLENCY TEST |
BS ISO 2758 : 2001 AMD 14672
|
PAPER - DETERMINATION OF BURSTING STRENGTH |
13/30277424 DC : 0
|
BS EN ISO 3037 - CORRUGATED FIBREBOARD - DETERMINATION OF EDGEWISE CRUSH RESISTANCE (UNWAXED EDGE METHOD) |
07/30140460 DC : 0
|
BS ISO 9416 - PAPER - DETERMINATION OF LIGHT SCATTERING AND ABSORPTION COEFFICIENTS (USING KUBELKA-MUNK THEORY) |
UNI ISO 5636-3 : 2014
|
PAPER AND BOARD - DETERMINATION OF AIR PERMEANCE (MEDIUM RANGE) - PART 3: BENDTSEN METHOD |
00/562032 DC : DRAFT MAY 2000
|
ISO 17190-8 - POLYMER-BASED ABSORBENT MATERIALS - MEASUREMENT OF CHARACTERISTICS - PART 8: GRAVIMETRIC DETERMINATION OF FLOWRATE |
11/30239244 DC : 0
|
BS EN ISO 12625-7 - TISSUE PAPER AND TISSUE PRODUCTS - PART 7: DETERMINATION OF OPTICAL PROPERTIES - MEASUREMENT OF BRIGHTNESS AND COLOUR |
04/30118282 DC : DRAFT AUG 2004
|
EN ISO 12625-8 - TISSUE PAPER AND TISSUE PRODUCTS - PART 8: WATER ABSORPTION TIME AND RESIDUAL WATER ABSORPTION CAPACITY, MANUAL AND AUTOMATED BASKET IMMERSION TEST METHOD |
UNE-ISO 5636-5:2015
|
Paper and board. Determination of air permeance (medium range). Part 5: Gurley method |
BS ISO 15754:2009
|
Paper and board. Determination of z-directional tensile strength |
BS ISO 5630-5:2008
|
Paper and board. Accelerated ageing Exposure to elevated temperature at 100 °C |
BS ISO 8791-2:2013
|
Paper and board. Determination of roughness/smoothness (air leak methods) Bendtsen method |
07/30165293 DC : 0
|
BS EN ISO 7263 - CORRUGATING MEDIUM - DETERMINATION OF THE FLAT CRUSH RESISTANCE AFTER LABORATORY FLUTING |
04/30089096 DC : DRAFT APR 2004
|
BS EN ISO 291 - PLASTICS - STANDARD ATMOSPHERES FOR CONDITIONING AND TESTING |
10/30205404 DC : 0
|
BS ISO 5628 - PAPER AND BOARD - DETERMINATION OF BENDING STIFFNESS - GENERAL PRINCIPLES FOR TWO-POINT, THREE-POINT AND FOUR-POINT METHODS |
DIN ISO 5630-5:2016-10 (Draft)
|
PAPER AND BOARD - ACCELERATED AGEING - PART 5: EXPOSURE TO ELEVATED TEMPERATURE AT 100 DEGREES C (ISO 5630-5:2008) |
15/30294424 DC : 0
|
BS ISO 12634 - GRAPHIC TECHNOLOGY - DETERMINATION OF TACK OF PASTE INKS AND VEHICLES BY A ROTARY TACKMETER |
BS ISO 5631-1:2015
|
Paper and board. Determination of colour by diffuse reflectance Indoor daylight conditions (C/2°) |
13/30283973 DC : 0
|
BS EN ISO 12625-15 - TISSUE PAPER AND TISSUE PRODUCTS - PART 15: DETERMINATION OF OPTICAL PROPERTIES - MEASUREMENT OF BRIGHTNESS AND COLOUR WITH C/2 DEGREES (INDOOR DAYLIGHT) ILLUMINANT |
BS ISO 5269-3:2008
|
Pulps. Preparation of laboratory sheets for physical testing Conventional and Rapid-Köthen sheet formers using a closed water system |
06/30158432 DC : 0
|
BS ISO 2834-2 - GRAPHIC TECHNOLOGY - LABORATORY PREPARATION TEST PRINTS - PART 2: LIQUID PRINTING INKS |
DIN ISO 5630-6 E : 2017
|
PAPER AND BOARD - ACCELERATED AGEING - PART 6: EXPOSURE TO ATMOSPHERIC POLLUTION (NITROGEN DIOXIDE) (ISO 5630-6:2009) |
03/310721 DC : DRAFT JUNE 2003
|
ISO 12625-9 - TISSUE PAPER AND TISSUE PRODUCTS - PART 9: DETERMINATION OF BALL BURST STRENGTH |
15/30311310 DC : 0
|
BS ISO 5631-3 - PAPER AND BOARD - DETERMINATION OF COLOUR BY DIFFUSE REFLECTANCE - PART 3: INDOOR ILLUMINATION CONDITIONS (D50/2 DEGREES) |
15/30311307 DC : 0
|
BS ISO 5631-2 - PAPER AND BOARD - DETERMINATION OF COLOUR BY DIFFUSE REFLECTANCE - PART 2: OUTDOOR DAYLIGHT CONDITIONS (D65/10 DEGREES) |
DIN ISO 5630-4:2016-10 (Draft)
|
PAPER AND BOARD - ACCELERATED AGEING - PART 4: DRY HEAT TREATMENT AT 120 OR 150 DEGREES C (ISO 5630-4:1986) |
12/30196191 DC : 0
|
BS ISO 5636-4 - PAPER AND BOARD - DETERMINATION OF AIR PERMEANCE (MEDIUM RANGE) - PART 4: SHEFFIELD METHOD |
16/30328581 DC : 0
|
BS ISO 19594 - GRAPHIC TECHNOLOGY - TEST METHODS FOR THE DETERMINATION OF THE BINDING STRENGTH FOR PERFECT BOUND PRODUCTS - PAGE PULL TEST WORKING UPWARDS |
DIN EN ISO 12625-15 E : 2015
|
TISSUE PAPER AND TISSUE PRODUCTS - PART 15: DETERMINATION OF OPTICAL PROPERTIES - MEASUREMENT OF BRIGHTNESS AND COLOUR WITH C/2 DEGREES (INDOOR DAYLIGHT) ILLUMINANT (ISO 12625-15:2015) |
01/121198 DC : DRAFT MAR 2001
|
BS ISO 8254-3 - PAPER AND BOARD - MEASUREMENT OF SPECULAR GLOSS - PART 3: 20 DEGREES GLOSS |
PREN 868-6 : DRAFT 2015
|
PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 6: PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS |
BS ISO/IEC 15457-3:2008
|
Identification cards. Thin flexible cards Test methods |
BS ISO 5631-3:2015
|
Paper and board. Determination of colour by diffuse reflectance Indoor illumination conditions (D50/2°) |
BS ISO 12647-7:2016
|
Graphic technology. Process control for the production of halftone colour separations, proof and production prints Proofing processes working directly from digital data |
13/30286354 DC : 0
|
BS EN ISO 12625-9 - TISSUE PAPER AND TISSUE PRODUCTS - PART 9: DETERMINATION OF BALL BURST STRENGTH |
ISO 20494:2017
|
Paper — Requirements for stability for general graphic applications |
03/306710 DC : DRAFT APR 2003
|
ISO 8791-3 - PAPER AND BOARD - DETERMINATION OF ROUGHNESS/SMOOTHNESS (AIR LEAK METHODS) - PART 3: SHEFFIELD METHOD |
07/30166936 DC : DRAFT AUG 2007
|
BS EN 868-6 - PACKAGING MATERIALS FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 6: PAPER FOR THE MANUFACTURE OF STERILE BARRIER SYSTEMS INTENDED FOR STERILIZATION BY LOW TEMPERATURE STERILIZATION PROCESSES OR IRRADIATION - REQUIREMENTS AND TEST METHODS |
UNE-ISO 2493-2:2014
|
Paper and board. Determination of resistance to bending. Part 2: Taber-type tester |
NF ISO 5628 : 2012
|
PAPER AND BOARD - DETERMINATION OF BENDING STIFFNESS - GENERAL PRINCIPLES FOR TWO-POINT, THREE-POINT AND FOUR-POINT METHODS |
BS ISO 5270:1998
|
Pulps. Laboratory sheets. Determination of physical properties |
AAMI ISO 11140-3 : 2007
|
STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 3: CLASS 2 INDICATOR SYSTEMS FOR USE IN THE BOWIE AND DICK-TYPE STEAM PENETRATION TEST |
BS ISO 13820:2014
|
Paper, board and corrugated fibreboard. Description and calibration of compression-testing equipment |
BS ISO 5269-2 : 1998 AMD 13429
|
PULPS - PREPARATION OF LABORATORY SHEETS FOR PHYSICAL TESTING - RAPID-KOETHEN METHOD |
UNE-ISO 16945:2015
|
Corrugating medium. Determination of the edge crush resistance after laboratory fluting |
UNE-EN ISO 12625-11:2013
|
Tissue paper and tissue products - Part 11: Determination of wet ball burst strength (ISO 12625-11:2012) |
ISO 11093-2:1994
|
Paper and board — Testing of cores — Part 2: Conditioning of test samples |
ISO 5631-2:2015
|
Paper and board — Determination of colour by diffuse reflectance — Part 2: Outdoor daylight conditions (D65/10 degrees) |
INCITS/ISO/IEC 15457-3 : 2002 : R2007
|
IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
AAMI ISO 11140-3 : 2007 : R2012
|
STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 3: CLASS 2 INDICATOR SYSTEMS FOR USE IN THE BOWIE AND DICK-TYPE STEAM PENETRATION TEST |
DIN ISO 5630-7:2016-10 (Draft)
|
PAPER AND BOARD - ACCELERATED AGEING - PART 7: EXPOSURE TO LIGHT (ISO 5630-7:2014) |
ISO 5630-6:2009
|
Paper and board Accelerated ageing Part 6: Exposure to atmospheric pollution (nitrogen dioxide) |
ISO 17190-2:2001
|
Urine-absorbing aids for incontinence Test methods for characterizing polymer-based absorbent materials Part 2: Determination of amount of residual monomers |
UNE-ISO 15592-2:2012
|
Fine-cut tobacco and smoking articles made from it -- Methods of sampling, conditioning and analysis -- Part 2: Atmosphere for conditioning and testing |
DIN ISO 20369:2012-10
|
Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products - Determination of citrate content (ISO 20369:2009) |
03/309336 DC : DRAFT JUNE 2003
|
ISO 22414 - PAPER - CUT-SIZE OFFICE PAPER - MEASUREMENT OF EDGE QUALITY |
BS ISO 5629:2017
|
Paper and board. Determination of bending stiffness. Resonance method |
INCITS/ISO/IEC 15457-3 : 2002
|
IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
UNI EN ISO 217 : 2013
|
PAPER - UNTRIMMED SIZES - DESIGNATION AND TOLERANCES FOR PRIMARY AND SUPPLEMENTARY RANGES, AND INDICATION OF MACHINE DIRECTION |
ISO 2470-2:2008
|
Paper, board and pulps — Measurement of diffuse blue reflectance factor — Part 2: Outdoor daylight conditions (D65 brightness) |
BS 1248-1:1990
|
Wallcoverings in roll form Terms and symbols |
ASTM D 685 : 2017 : REDLINE
|
Standard Practice for Conditioning Paper and Paper Products for Testing |
ISO 4046-5:2002
|
Paper, board, pulps and related terms Vocabulary Part 5: Properties of pulp, paper and board |
S.R. CEN/TS 15968:2010
|
DETERMINATION OF EXTRACTABLE PERFLUOROOCTANESULPHONATE (PFOS) IN COATED AND IMPREGNATED SOLID ARTICLES, LIQUIDS AND FIRE FIGHTING FOAMS - METHOD FOR SAMPLING, EXTRACTION AND ANALYSIS BY LC-QMS OR LC-TANDEM/MS |
PD EN 14035-18:2004
|
Fireworks Hand-held fountains. Specification and test methods |
ISO 12647-7:2016
|
Graphic technology Process control for the production of halftone colour separations, proof and production prints Part 7: Proofing processes working directly from digital data |
ISO 16762:2016
|
Graphic technology Post-press General requirements for transfer, handling and storage |
ISO 5636-6:2015
|
Paper and board Determination of air permeance (medium range) Part 6: Oken method |
ISO 10549:2000
|
Micrographics A6 size aperture cards |
ISO 17190-9:2001
|
Urine-absorbing aids for incontinence Test methods for characterizing polymer-based absorbent materials Part 9: Gravimetric determination of density |
ISO/IEC 15457-3:2008
|
Identification cards — Thin flexible cards — Part 3: Test methods |
EN 234:1989/AC:1997
|
WALLCOVERINGS IN ROLL FORM - SPECIFICATION FOR WALLCOVERINGS FOR SUBSEQUENT DECORATION |
EN ISO 536:2012
|
Paper and board - Determination of grammage (ISO 536:2012) |
DIN EN ISO 12625-9:2015-05
|
TISSUE PAPER AND TISSUE PRODUCTS - PART 9: DETERMINATION OF BALL BURST STRENGTH (ISO 12625-9:2015) |
DIN EN ISO 291 E : 2008
|
PLASTICS - STANDARD ATMOSPHERES FOR CONDITIONING AND TESTING |
DIN EN ISO 3037:2013-12
|
Corrugated fibreboard - Determination of edgewise crush resistance (unwaxed edge method) (ISO 3037:2013) |
DIN EN ISO 5270:2013-02
|
Pulps - Laboratory sheets - Determination of physical properties (ISO 5270:2012) |
DIN EN 868-6:2015-08 (Draft)
|
PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 6: PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS |
DIN EN ISO 2759:2014-10
|
Board - Determination of bursting strength (ISO 2759:2014) |
DIN EN ISO 12625-8:2011-04
|
Tissue paper and tissue products - Part 8: Water-absorption time and water-absorption capacity, basket-immersion test method (ISO 12625-8:2010) |
DIN EN ISO 12625-3:2014-09
|
Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness, apparent bulk density and bulk (ISO 12625-3:2014) |
DIN EN ISO 2758:2014-12
|
PAPER - DETERMINATION OF BURSTING STRENGTH (ISO 2758:2014) |
DIN EN ISO 12625-7:2014-08
|
Tissue paper and tissue products - Part 7: Determination of optical properties - Measurement of brightness and colour with D65/10? (outdoor daylight) (ISO 12625-7:2014) |
ISO 1924-2:2008
|
Paper and board — Determination of tensile properties — Part 2: Constant rate of elongation method (20 mm/min) |
UNE-EN ISO 12625-4:2017
|
Tissue paper and tissue products - Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption (ISO 12625-4:2016) |
BS EN ISO 11140-4:2007
|
Sterilization of health care products. Chemical indicators Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration |
BS EN ISO 3037:2013
|
Corrugated fibreboard. Determination of edgewise crush resistance (unwaxed edge method) |
BS EN 868-2:2017
|
Packaging for terminally sterilized medical devices Sterilization wrap. Requirements and test methods |
BS EN ISO 12625-3:2014
|
Tissue paper and tissue products Determination of thickness, bulking thickness and apparent bulk density and bulk |
BS EN ISO 536:2012
|
Paper and board. Determination of grammage |
ISO 535:2014
|
Paper and board — Determination of water absorptiveness — Cobb method |
BS EN 14035-29:2004
|
Fireworks Serpents. Specification and test methods |
ISO 12625-12:2010
|
Tissue paper and tissue products — Part 12: Determination of tensile strength of perforated lines — Calculation of perforation efficiency |
BS EN ISO 12625-9:2005
|
Tissue paper and tissue products Determination of ball burst strength |
ISO 12625-8:2010
|
Tissue paper and tissue products Part 8: Water-absorption time and water-absorption capacity, basket-immersion test method |
ISO 1974:2012
|
Paper — Determination of tearing resistance — Elmendorf method |
UNI EN ISO 536 : 2012
|
PAPER AND BOARD - DETERMINATION OF GRAMMAGE |
UNE-ISO 2493-1:2014
|
Paper and board - Determination of bending resistance - Part 1: Constant rate of deflection |
BS EN ISO 534:2011
|
Paper and board. Determination of thickness, density and specific volume |
BS EN ISO 5269-1:2005
|
Pulps. Preparation of laboratory sheets for physical testing Conventional sheet-former method |
BS EN 867-4:2001
|
Non-biological systems for use in sterilizers Specification for indicators as an alternative to the Bowie and Dick test for the detection of steam penetration |
BS EN ISO 12625-6:2016
|
Tissue paper and tissue products Determination of grammage |
BS EN 14086:2003
|
Paper and board. Measurement of specular gloss. 45° gloss with a parallel beam, DIN method |
BS EN ISO 9706:2000
|
Information and documentation. Paper for documents. Requirements for permanence |
UNE-EN ISO 12625-5:2017
|
Tissue paper and tissue products - Part 5: Determination of wet tensile strength (ISO 12625-5:2016) |
ISO 291:2008
|
Plastics Standard atmospheres for conditioning and testing |
ISO 11140-4:2007
|
Sterilization of health care products — Chemical indicators — Part 4: Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration |
BS EN ISO 216:2001
|
Writing paper and certain classes of printed matter. Trimmed sizes. A and B series |
ISO 9706:1994
|
Information and documentation — Paper for documents — Requirements for permanence |
ISO 12625-16:2015
|
Tissue paper and tissue products Part 16: Determination of optical properties Opacity (paper backing) Diffuse reflectance method |
DIN EN ISO 216:2007-12
|
WRITING PAPER AND CERTAIN CLASSES OF PRINTED MATTER - TRIMMED SIZES - A AND B SERIES, AND INDICATION OF MACHINE DIRECTION |
BS EN 14035-34:2003
|
Fireworks Table bombs. Specification and test methods |
BS EN 14035-19:2003
|
Fireworks Hand-held sparklers. Specification and test methods |
BS EN 13855-2:2003
|
Manufactured articles solely filled with feathers and down. Measurement of thickness and compressibility of cushions Test method by oscillation |
BS EN ISO 7263:2011
|
Corrugating medium. Determination of the flat crush resistance after laboratory fluting |
ISO 5269-2:2004
|
Pulps Preparation of laboratory sheets for physical testing Part 2: Rapid-Kthen method |
ISO 8254-1:2009
|
Paper and board Measurement of specular gloss Part 1: 75 degree gloss with a converging beam, TAPPI method |
UNE-EN ISO 534:2012
|
Paper and board - Determination of thickness, density and specific volume (ISO 534:2011) |
UNE-EN ISO 12625-3:2015
|
Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness and apparent bulk density and bulk (ISO 12625-3:2014) |
UNE-EN ISO 12625-9:2015
|
Tissue paper and tissue products - Part 9: Determination of ball burst strength (ISO 12625-9:2015) |
BS EN 14035-24:2004
|
Fireworks Novelty matches. Specification and test methods |
BS EN 14035-23:2003
|
Fireworks Non-hand-held sparklers. Specification and test methods |
ISO 5269-1:2005
|
Pulps Preparation of laboratory sheets for physical testing Part 1: Conventional sheet-former method |
ISO 5270:2012
|
Pulps — Laboratory sheets — Determination of physical properties |
BS EN ISO 12625-7:2014
|
Tissue paper and tissue products Determination of optical properties. Measurement of brightness and colour with D65/10° (outdoor daylight) |
ISO 8254-2:2016
|
Paper and board Measurement of specular gloss Part 2: 75 degree gloss with a parallel beam, DIN method |
ISO 216:2007
|
Writing paper and certain classes of printed matter Trimmed sizes A and B series, and indication of machine direction |
UNE-EN ISO 2758:2014
|
Paper - Determination of bursting strength (ISO 2758:2014) |
ISO 2758:2014
|
Paper Determination of bursting strength |
BS EN ISO 1924-2:2008
|
Paper and board. Determination of tensile properties Constant rate of elongation method (20 mm/min) |
ISO 536:2012
|
Paper and board Determination of grammage |
ISO 12625-9:2015
|
Tissue paper and tissue products Part 9: Determination of ball burst strength |
UNE-EN ISO 12625-6:2017
|
Tissue paper and tissue products - Part 6: Determination of grammage (ISO 12625-6:2016) |
ISO 217:2013
|
Paper Untrimmed sizes Designation and tolerances for primary and supplementary ranges, and indication of machine direction |
UNE-EN ISO 2759:2014
|
Board - Determination of bursting strength (ISO 2759:2014) |
BS EN 14035-15:2003
|
Fireworks Fountains. Specification and test methods |
UNE-ISO 3781:2015
|
Paper and board - Determination of tensile strength after inmersion in water |
ISO 12625-4:2016
|
Tissue paper and tissue products — Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption |
ONORM EN ISO 536 : 2013
|
PAPER AND BOARD - DETERMINATION OF GRAMMAGE (ISO 536:2012) |
BS EN 868-6:2017
|
Packaging for terminally sterilized medical devices Paper for low temperature sterilization processes. Requirements and test methods |
ISO 6599-1:1983
|
Packaging — Sacks — Conditioning for testing — Part 1: Paper sacks |
EN 14035-29 : 2004
|
FIREWORKS - PART 29: SERPENTS - SPECIFICATION AND TEST METHODS |
EN ISO 5269-2:2004
|
Pulps - Preparation of laboratory sheets for physical testing - Part 2: Rapid-Köthen method (ISO 5269-2:2004) |
EN ISO 217:2013
|
Paper - Untrimmed sizes - Designation and tolerances for primary and supplementary ranges, and indication of machine direction (ISO 217:2013) |
EN ISO 535:2014
|
Paper and board - Determination of water absorptiveness - Cobb method (ISO 535:2014) |
EN 868-2:2017
|
Packaging for terminally sterilized medical devices - Part 2: Sterilization wrap - Requirements and test methods |
EN 14035-7 : 2004
|
FIREWORKS - PART 7: BENGAL MATCHES - SPECIFICATION AND TEST METHODS |
EN ISO 291:2008
|
Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008) |
EN ISO 1974:2012
|
Paper - Determination of tearing resistance - Elmendorf method (ISO 1974:2012) |
EN ISO 12625-16:2015
|
Tissue paper and tissue products - Part 16: Determination of optical properties - Opacity (paper backing) - Diffuse reflectance method (ISO 12625-16:2015) |
EN ISO 534:2011
|
Paper and board - Determination of thickness, density and specific volume (ISO 534:2011) |
EN 14035-25 : 2005
|
FIREWORKS - PART 25: PARTY POPPERS - SPECIFICATION AND TEST METHODS |
EN ISO 11140-4:2007
|
Sterilization of health care products - Chemical indicators - Part 4: Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration (ISO 11140-4:2007) |
EN 14035-34:2003/AC:2005
|
FIREWORKS - PART 34: TABLE BOMBS - SPECIFICATION AND TEST METHODS |
EN 14035-24 : 2004
|
FIREWORKS - PART 24: NOVELTY MATCHES - SPECIFICATION AND TEST METHODS |
EN ISO 11140-3:2009
|
Sterilization of health care products - Chemical indicators - Part 3: Class 2 indicator systems for use in the Bowie and Dick-type steam penetration test (ISO 11140-3:2007, including Cor 1:2007) |
EN ISO 3035:2011
|
Corrugated fibreboard - Determination of flat crush resistance (ISO 3035:2011) |
EN ISO 2759:2014
|
Board - Determination of bursting strength (ISO 2759:2014) |
EN 14086:2003
|
Paper and board - Measurement of specular gloss - 45° gloss with a parallel beam, DIN method |
EN 26599-1 : 1992
|
PACKAGING - SACKS - CONDITIONING FOR TESTING - PAPER SACKS (ISO 6599-1:1983) |
EN 14035-15:2003/AC:2005
|
FIREWORKS - PART 15: FOUNTAINS - SPECIFICATION AND TEST METHODS |
EN ISO 12625-8:2010
|
Tissue paper and tissue products - Part 8: Water-absorption time and water-absorption capacity, basket-immersion test method (ISO 12625-8:2010) |
EN 14035-19:2003/AC:2006
|
FIREWORKS - PART 19: HAND-HELD SPARKLERS - SPECIFICATION AND TEST METHODS |
EN ISO 12625-9:2015
|
Tissue paper and tissue products - Part 9: Determination of ball burst strength (ISO 12625-9:2015) |
EN ISO 12625-12:2010
|
Tissue paper and tissue products - Part 12: Determination of tensile strength of perforated lines - Calculation of perforation efficiency (ISO 12625-12:2010) |
EN ISO 7263:2011
|
Corrugating medium - Determination of the flat crush resistance after laboratory fluting (ISO 7263:2011) |
EN ISO 12625-15:2015
|
Tissue paper and tissue products - Part 15: Determination of optical properties - Measurement of brightness and colour with C/2° (indoor daylight) illuminant (ISO 12625-15:2015) |
EN ISO 5270:2012
|
Pulps - Laboratory sheets - Determination of physical properties (ISO 5270:2012) |
EN ISO 1924-2:2008
|
Paper and board - Determination of tensile properties - Part 2: Constant rate of elongation method (20 mm/min) (ISO 1924-2:2008) |
EN 14035-23:2003/AC:2005
|
FIREWORKS - PART 23: NON-HAND-HELD SPARKLERS - SPECIFICATION AND TEST METHODS |
EN ISO 3037:2013
|
Corrugated fibreboard - Determination of edgewise crush resistance (unwaxed edge method) (ISO 3037:2013) |
EN 13855-1:2003
|
Manufactured articles solely filled with feathers and down - Measurement of thickness and compressibility of cushions - Part 1: Test method by rotation |
EN 259:1991/AC:1997
|
WALL COVERINGS IN ROLL FORM - SPECIFICATION FOR HEAVY DUTY WALL COVERINGS |
EN ISO 9706:1998
|
Information and documentation - Paper for documents - Requirements for permanence (ISO 9706:1994) |
EN 14035-18 : 2004
|
FIREWORKS - PART 18: HAND-HELD FOUNTAINS - SPECIFICATION AND TEST METHODS |
EN ISO 8254-1:2009
|
Paper and board - Measurement of specular gloss - Part 1: 75 degree gloss with a converging beam, TAPPI method (ISO 8254-1:2009) |
EN ISO 2758:2014
|
Paper - Determination of bursting strength (ISO 2758:2014) |
EN 868-6:2017
|
Packaging for terminally sterilized medical devices - Part 6: Paper for low temperature sterilization processes - Requirements and test methods |
EN 868-3:2017
|
Packaging for terminally sterilized medical devices - Part 3: Paper for use in the manufacture of paper bags (specified in EN 868-4) and in the manufacture of pouches and reels (specified in EN 868-5) - Requirements and test methods |
EN ISO 5269-1:2005
|
Pulps - Preparation of laboratory sheets for physical testing - Part 1: Conventional sheet-former method (ISO 5269-1:2005) |
BS ISO 9895:2008
|
Paper and board. Compressive strength. Short-span test |
BS ISO 2834-2:2015
|
Graphic technology. Laboratory preparation test prints Liquid printing inks |
UNE-EN ISO 12625-12:2010
|
Tissue paper and tissue products - Part 12: Determination of tensile strength of perforated lines - Calculation of perforation efficiency (ISO 12625-12:2010) |
13/30247449 DC : 0
|
BS ISO 16945 - CORRUGATING MEDIUM - DETERMINATION OF THE EDGE CRUSH RESISTANCE AFTER LABORATORY FLUTING |
UNE-ISO 2470-1:2012
|
Paper, board and pulps - Measurement of diffuse blue reflectance factor - Part 1: Indoor daylight conditions (ISO brightness) |
03/310720 DC : DRAFT JUNE 2003
|
ISO 12625-6 - TISSUE PAPER AND TISSUE PRODUCTS - PART 6: DETERMINATION OF GRAMMAGE |
BS ISO 18522:2016
|
Paper and board. Automated off-line testing of physical properties for CD (cross direction) profiles |
ISO 17190-7:2001
|
Urine-absorbing aids for incontinence Test methods for characterizing polymer-based absorbent materials Part 7: Gravimetric determination of absorption under pressure |
03/319402 DC : DRAFT NOV 2003
|
BS EN 14035-26 - FIREWORKS - PART 26: PERCUSSION CAPS - SPECIFICATION AND TEST METHODS |
BS ISO 3034:2011
|
Corrugated fibreboard. Determination of single sheet thickness |
17/30323191 DC : DRAFT JAN 2017
|
BS ISO 20494 - PAPER - REQUIREMENTS FOR STABILITY FOR GENERAL, GRAPHIC APPLICATIONS |
NF ISO 12192 : 2011
|
PAPER AND BOARD - DETERMINATION OF COMPRESSIVE STRENGTH - RING CRUSH METHOD |
07/30140452 DC : 0
|
BS ISO 5631-2 - PAPER AND BOARD - DETERMINATION OF COLOUR BY DIFFUSE REFLECTANCE - PART 2: OUTDOOR DAYLIGHT CONDITIONS (D65/10 DEGREES) |
I.S. EN 14035-18:2005
|
FIREWORKS - PART 18: HAND-HELD FOUNTAINS - SPECIFICATION AND TEST METHODS |
DIN EN ISO 12625-16:2015-05
|
Tissue paper and tissue products - Part 16: Determination of optical properties - Opacity (paper backing) - Diffuse reflectance method (ISO 12625-16:2015) |
14/30219261 DC : 0
|
BS ISO 5636-6 - PAPER AND BOARD - DETERMINATION OF AIR PERMEANCE AND AIR RESISTANCE (MEDIUM RANGE) - PART 6: OKEN METHOD |
00/562026 DC : DRAFT MAY 2000
|
ISO 17190-2 - POLYMER-BASED ABSORBENT MATERIALS - MEASUREMENT OF CHARACTERISTICS - PART 2: DETERMINATION OF AMOUNT OF RESIDUAL MONOMER |
PD ISO/TS 20460:2015
|
Paper and board. Automated on-line testing. Metrological comparability between standardized measurements and output of on-line gauges |
DIN ISO 5630-5 E : 2017
|
PAPER AND BOARD - ACCELERATED AGEING - PART 5: EXPOSURE TO ELEVATED TEMPERATURE AT 100 DEGREES C (ISO 5630-5:2008) |
13/30283977 DC : 0
|
BS EN ISO 12625-16 - TISSUE PAPER AND TISSUE PRODUCTS - PART 16: DETERMINATION OF OPTICAL PROPERTIES - OPACITY (PAPER BACKING) - DIFFUSE REFLECTANCE FACTOR |
BS ISO 1924-3:2005
|
Paper and board. Determination of tensile properties Constant rate of elongation method (100 mm/min) |
DIN EN ISO 12625-12:2010-05
|
Tissue paper and tissue products - Part 12: Determination of tensile strength of perforated lines - Calculation of perforation efficiency (ISO 12625-12:2010) |
07/30140456 DC : 0
|
BS ISO 5631-3 - PAPER AND BOARD - DETERMINATION OF COLOUR BY DIFFUSE REFLECTANCE - PART 3: INDOOR ILLUMINATION CONDITIONS (D50/2 ) |
11/30241890 DC : 0
|
BS EN 16261-3 - PYROTECHNIC ARTICLES - FIREWORKS, CATEGORY 4 - PART 3: TEST METHODS |
DIN ISO 3034:2016-08
|
CORRUGATED FIBREBOARD - DETERMINATION OF SINGLE SHEET THICKNESS (ISO 3034:2011) |
ISO/TR 12705:2011
|
Graphic technology Laboratory test method for chemical ghosting in lithography |
DIN ISO 5630-7 E : 2017
|
PAPER AND BOARD - ACCELERATED AGEING - PART 7: EXPOSURE TO LIGHT (ISO 5630-7:2014) |
15/30325864 DC : 0
|
BS EN 868-7 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 7: ADHESIVE COATED PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS |
BS ISO 2834-3:2008
|
Graphic technology. Laboratory preparation of test prints Screen printing inks |
PREN ISO 12625-3 : DRAFT 2013
|
TISSUE PAPER AND TISSUE PRODUCTS - PART 3: DETERMINATION OF THICKNESS, BULKING THICKNESS AND APPARENT BULK DENSITY (ISO/DIS 12625-3:2013) |
BS ISO 16532-1:2008
|
Paper and board. Determination of grease resistance Permeability test |
ISO 17190-10:2001
|
Urine-absorbing aids for incontinence Test methods for characterizing polymer-based absorbent materials Part 10: Determination of extractable polymer content by potentiometric titration |
BS ISO 5630-6:2009
|
Paper and board. Accelerated ageing Exposure to atmospheric pollution (nitrogen dioxide) |
UNI EN ISO 3035 : 2012
|
CORRUGATED FIBREBOARD - DETERMINATION OF FLAT CRUSH RESISTANCE |
BS EN ISO 535:2014
|
Paper and board. Determination of water absorptiveness. Cobb method |
BS ISO 2471:1998
|
Paper and board. Determination of opacity (paper backing). Diffuse reflectance method |
BS ISO 8791-4:2007
|
Paper and board. Determination of roughness/smoothness (air leak methods) Print-surf method |
00/562034 DC : DRAFT MAY 2000
|
ISO 17190-10 - POLYMER-BASED ABSORBENT MATERIALS - MEASUREMENT OF CHARACTERISTICS - PART 10: DETERMINATION OF EXTRACTABLE POLYMER CONTENT BY POTENTIOMETRIC TITRATION |
UNE-ISO 15359:2014
|
Paper and board. Determination of the static and kinetic coefficients of friction. Horizontal plane method |
15/30325858 DC : 0
|
BS EN 868-6 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 6: PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS |
15/30302564 DC : 0
|
BS ISO 8254-3 - PAPER AND BOARD - MEASUREMENT OF SPECULAR GLOSS - PART 3: 20 DEGREE GLOSS WITH A CONVERGING BEAM, TAPPI METHOD |
BS EN ISO 12625-11:2012
|
Tissue paper and tissue products Determination of wet ball burst strength |
07/30166927 DC : DRAFT AUG 2007
|
BS EN 868-3 - PACKAGING MATERIALS FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 3: PAPER FOR USE IN THE MANUFACTURE OF PAPER BAGS (SPECIFIED IN EN 868-4) AND IN THE MANUFACTURE OF POUCHES AND REELS (SPECIFIED IN EN 868-5) - REQUIREMENTS AND TEST METHODS |
DIN EN 868-7:2015-08 (Draft)
|
PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 7: ADHESIVE COATED PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS |
03/310738 DC : DRAFT JULY 2003
|
EN 12625-1 - TISSUE PAPER AND TISSUE PRODUCTS - PART 1: GENERAL GUIDANCE ON TERMS |
UNI ISO 8791-2 : 2014
|
PAPER AND BOARD - DETERMINATION OF ROUGHNESS/SMOOTHNESS (AIR LEAK METHODS) - PART 2: BENDTSEN METHOD |
NF ISO 2965 : 2009
|
MATERIALS USED AS CIGARETTE PAPERS, FILTER PLUG WRAP AND FILTER JOINING PAPER, INCLUDING MATERIALS HAVING A DISCRETE OR ORIENTED PERMEABLE ZONE AND MATERIALS WITH BANDS OF DIFFERING PERMEABILITY - DETERMINATION OF AIR PERMEABILITY |
BS ISO 2528:2017
|
Sheet materials. Determination of water vapour transmission rate (WVTR). Gravimetric (dish) method |
08/30181295 DC : DRAFT APR 2008
|
BS ISO 5631-1 - PAPER AND BOARD - DETERMINATION OF COLOUR BY DIFFUSE REFLECTANCE - PART 1: INDOOR DAYLIGHT CONDITIONS (C/2 DEGREES) |
BS ISO 9706 : 94 AMD 10518
|
INFORMATION AND DOCUMENTATION - PAPER FOR DOCUMENTS - REQUIREMENTS FOR PERMANENCE |
07/30122297 DC : 0
|
BS ISO 15754 - PAPER AND BOARD - DETERMINATION OF Z-DIRECTIONAL TENSILE STRENGTH |
BS EN ISO 3035:2011
|
Corrugated fibreboard. Determination of flat crush resistance |
BS ISO 8254-1 : 99 AMD 14259
|
PAPER AND BOARD - MEASUREMENT OF SPECULAR GLOSS - PART 1 - 75 DEGREE GLOSS WITH A CONVERGING BEAM, TAPPI METHOD |
BS ISO 536 : 1995 AMD 9309
|
PAPER AND BOARD - DETERMINATION OF GRAMMAGE |
01/648266 DC : DRAFT MAY 2001
|
ISO/IEC FCD 15457-3 - IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
09/30193349 DC : DRAFT FEB 2009
|
BS ISO 11476 - PAPER AND BOARD - DETERMINATION OF CIE-WHITENESS, C/2 DEGREE (INDOOR ILLUMINATION CONDITIONS) |
CSA ISO/IEC 15457-3 : 2009
|
IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
CSA Z5100/Z5200 PACKAGE : 2017
|
CONSISTS OF Z5100-17, CELLULOSE NANOMATERIALS - TEST METHODS FOR CHARACTERIZATION AND Z5200-17, CELLULOSE NANOMATERIALS - BLANK DETAIL SPECIFICATION |
ISO 17190-11:2001
|
Urine-absorbing aids for incontinence — Test methods for characterizing polymer-based absorbent materials — Part 11: Determination of content of respirable particles |
UNE-ISO 3036:2013
|
Board. Determination of puncture resistance. |
TAPPI/ANSI T 402 sp:2013
|
STANDARD CONDITIONING AND TESTING ATMOSPHERES FOR PAPER, BOARD, PULP HANDSHEETS, AND RELATED PRODUCTS |
UNE-EN ISO 1974:2013
|
Paper - Determination of tearing resistance - Elmendorf method (ISO 1974:2012) |
I.S. EN ISO 12625-15:2015
|
TISSUE PAPER AND TISSUE PRODUCTS - PART 15: DETERMINATION OF OPTICAL PROPERTIES - MEASUREMENT OF BRIGHTNESS AND COLOUR WITH C/2 DEGREES (INDOOR DAYLIGHT) ILLUMINANT (ISO 12625-15:2015) |
UNI ISO 9895 : 2009
|
PAPER AND BOARD - COMPRESSIVE STRENGTH - SHORT-SPAN TEST |
ISO 5636-5:2013
|
Paper and board — Determination of air permeance (medium range) — Part 5: Gurley method |
ONORM EN ISO 7263 : 2011
|
CORRUGATING MEDIUM - DETERMINATION OF THE FLAT CRUSH RESISTANCE AFTER LABORATORY FLUTING |
UNE-ISO 11093-2:2015
|
Paper and board. Testing of cores. Part 2: Conditioning of test samples |
ISO 2965:2009
|
Materials used as cigarette papers, filter plug wrap and filter joining paper, including materials having a discrete or oriented permeable zone and materials with bands of differing permeability Determination of air permeability |
ISO 20370:2009
|
Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products Determination of acetate content |
ISO 11108:1996
|
Information and documentation — Archival paper — Requirements for permanence and durability |
NF EN 14225-3 : 2005
|
DIVING SUITS - PART 3: ACTIVELY HEATED OR COOLED SUIT (SYSTEMS) - REQUIREMENTS AND TEST METHODS |
ISO 2834-2:2015
|
Graphic technology — Laboratory preparation test prints — Part 2: Liquid printing inks |
UNE-ISO 5631-1:2015
|
Paper and board. Determination of colour by diffuse reflectance. Part 1: Indoor daylight conditions (C/2º) |
UNE-ISO 16532-3:2017
|
Paper and board. Determination of grease resistance. Part 3: Turpentine test for voids in glassine and greaseproof papers |
BS ISO 2965:2009
|
Materials used as cigarette papers, filter plug wrap and filter joining paper, including materials having a discrete or oriented permeable zone and materials with bands of differing permeability. Determination of air permeability |
UNE-EN ISO 12625-15:2015
|
Tissue paper and tissue products - Part 15: Determination of optical properties - Measurement of brightness and colour with C/2° (indoor daylight) illuminant (ISO 12625-15:2015) |
NF ISO 5630-6 : 2009
|
PAPER AND BOARD - ACCELERATED AGEING - PART 6: EXPOSURE TO ATMOSPHERIC POLLUTION (NITROGEN DIOXIDE) |
UNE-ISO 2834-3:2013
|
Graphic technology -- Laboratory preparation of test prints -- Part 3: Screen printing inks |
ISO 8226-1:1994
|
Paper and board Measurement of hygroexpansivity Part 1: Hygroexpansivity up to a maximum relative humidity of 68 % |
I.S. ENV 12625-2:1999
|
TISSUE PAPER AND TISSUE PRODUCTS - PART 2: PROCEDURES FOR SAMPLING AND CONDITIONING |
ISO 20369:2009
|
Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products Determination of citrate content |
I.S. EN 13088:2001
|
MANUFACTURED ARTICLES FILLED WITH FEATHER AND DOWN - METHOD FOR THE DETERMINATION OF A FILLED PRODUCT'S TOTAL MASS AND OF THE MASS OF THE FILLING |
ISO 15361:2000
|
Pulps Determination of zero-span tensile strength, wet or dry |
I.S. EN ISO 536:2012
|
PAPER AND BOARD - DETERMINATION OF GRAMMAGE (ISO 536:2012) |
DIN EN ISO 1924-2:2009-05
|
PAPER AND BOARD - DETERMINATION OF TENSILE PROPERTIES - PART 2: CONSTANT RATE OF ELONGATION METHOD (20 MM/MIN) |
DIN EN 868-3:2015-08 (Draft)
|
PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 3: PAPER FOR USE IN THE MANUFACTURE OF PAPER BAGS (SPECIFIED IN EN 868-4) AND IN THE MANUFACTURE OF POUCHES AND REELS (SPECIFIED IN EN 868-5) - REQUIREMENTS AND TEST METHODS |
DIN EN 868-2:2015-08 (Draft)
|
PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: STERILIZATION WRAP - REQUIREMENTS AND TEST METHODS |
BS EN 13543:2001
|
Manufactured articles filled with feather and down. Measurement of water absorption of filling material |
BS EN ISO 11140-3:2009
|
Sterilization of health care products. Chemical indicators Class 2 indicator systems for use in the Bowie and Dick-type steam penetration test |
UNE-EN 868-3:2017
|
Packaging for terminally sterilized medical devices - Part 3: Paper for use in the manufacture of paper bags (specified in EN 868-4) and in the manufacture of pouches and reels (specified in EN 868-5) - Requirements and test methods |
BS EN 20535:1994
|
Paper and board. Determination of water absorptiveness. Cobb method |
BS EN 12283:2002
|
Printing and business paper. Determination of toner adhesion |
ISO 12625-6:2016
|
Tissue paper and tissue products Part 6: Determination of grammage |
ISO 12625-5:2016
|
Tissue paper and tissue products — Part 5: Determination of wet tensile strength |
BS EN 12858:1999
|
Paper. Printing and business paper. Requirements for continuous stationery |
BS EN 868-1:1997
|
Packaging materials and systems for medical devices which are to be sterilized General requirements and test methods |
BS EN 644:1999
|
Paper. Untrimmed sizes. Primary range and supplementary range designation and tolerances, expression of direction of manufacture |
BS EN 753-3:1999
|
Identification card systems. Intersector thin flexible cards Test methods |
BS EN 12132-1:1999
|
Feather and down. Methods of testing the down-proof properties of fabrics Rubbing test |
ISO 534:2011
|
Paper and board — Determination of thickness, density and specific volume |
ISO 12625-15:2015
|
Tissue paper and tissue products — Part 15: Determination of optical properties — Measurement of brightness and colour with C/2° (indoor daylight) illuminant |
ISO 3035:2011
|
Corrugated fibreboard — Determination of flat crush resistance |
EN 1162:1996
|
Feather and down - Test methods - Determination of the oxygen index number |
DIN EN 868-3:2017-05
|
PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 3: PAPER FOR USE IN THE MANUFACTURE OF PAPER BAGS (SPECIFIED IN EN 868-4) AND IN THE MANUFACTURE OF POUCHES AND REELS (SPECIFIED IN EN 868-5) - REQUIREMENTS AND TEST METHODS |
DIN ISO 5630-4:2017-03
|
PAPER AND BOARD - ACCELERATED AGEING - PART 4: DRY HEAT TREATMENT AT 120 OR 150 DEGREES C (ISO 5630-4:1986) |
CEN/TS 15968:2010
|
Determination of extractable perfluorooctanesulphonate (PFOS) in coated and impregnated solid articles, liquids and fire fighting foams - Method for sampling, extraction and analysis by LC-qMS or LC-tandem/MS |
EN ISO 216:2007
|
Writing paper and certain classes of printed matter - Trimmed sizes - A and B series, and indication of machine direction (ISO 216:2007) |
DIN ISO 5630-6:2017-03
|
Paper and board - Accelerated ageing - Part 6: Exposure to atmospheric pollution (nitrogen dioxide) (ISO 5630-6:2009) |
DIN EN ISO 8254-1:2009-09
|
PAPER AND BOARD - MEASUREMENT OF SPECULAR GLOSS - PART 1: 75 DEGREE GLOSS WITH A CONVERGING BEAM, TAPPI METHOD |
EN 1164:1998
|
Feather and down - Test methods - Determination of the turbidity of an aqueous extract |
DIN EN ISO 2759:2003-11
|
BOARD - DETERMINATION OF BURSTING STRENGTH (ISO 2759:2014) |
EN ISO 12625-3:2014
|
Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness and apparent bulk density and bulk (ISO 12625-3:2014) |
EN 12132-2:1998/A1:2003
|
FEATHER AND DOWN - METHODS OF TESTING THE DOWN-PROOF PROPERTIES OF FABRICS - PART 2: IMPACT TEST |
DIN EN 868-6:2017-05
|
PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 6: PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS |
DIN EN ISO 5269-2:2005-03
|
Pulps - Preparation of laboratory sheets for physical testing - Part 2: Rapid-Koethen method (ISO 5269-2:2004) |
DIN EN ISO 5269-1:2005-05
|
Pulps - Preparation of laboratory sheets for physical testing - Part 1: Conventional sheet-former method (ISO 5269-1:2005) |
DIN ISO 8791-4:2008-05
|
Paper and board - Determination of roughness/smoothness (air leak methods) - Part 4: Print-surf method (ISO 8791-4:2007) |
DIN ISO 5630-7:2017-03
|
Paper and board - Accelerated ageing - Part 7: Exposure to light (ISO 5630-7:2014) |
DIN EN ISO 291:2008-08
|
PLASTICS - STANDARD ATMOSPHERES FOR CONDITIONING AND TESTING |
BS 6036(1995) : 1995 AMD 9160
|
CORRUGATED FIBREBOARD - DETERMINATION OF EDGEWISE CRUSH RESISTANCE (UNWAXED EDGE METHOD) |
BS 4419:1980
|
Methods for determination of folding endurance of paper |
BS 3983(1989) : AMD 7810
|
METHOD FOR DETERMINATION OF THICKNESS AND APPARENT BULK DENSITY OR APPARENT SHEET DENSITY OF PAPER AND BOARD |
BS 4468(1990) : 90 AMD 8176
|
METHOD FOR DETERMINATION OF THE INTERNAL TEARING RESISTANCE OF PAPER |
BS 2644(1991) : AMD 8174
|
METHOD FOR DETERMINATION OF WATER ABSORPTIVENESS OF PAPER AND BOARD (COBB METHOD) |
BS 3432:1980
|
Method for determination of grammage of paper and board |