DIN EN ISO 19712-2:2013-04
|
Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods (ISO 19712-2:2007) |
UNI EN ISO 15015 : 2011
|
PLASTICS - EXTRUDED SHEETS OF IMPACT-MODIFIED ACRYLONITRILE-STYRENE COPOLYMERS (ABS, AEPDS AND ASA) - REQUIREMENTS AND TEST METHODS |
DIN EN 16506 E : 2014
|
SYSTEMS FOR RENOVATION OF DRAINS AND SEWERS - LINING WITH A RIGIDLY ANCHORED PLASTICS INNER LAYER (RAPL) |
10/30211370 DC : DRAFT JUNE 2010
|
BS ISO 11833-1 - PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: SHEETS OF THICKNESS NOT LESS THAN 1 MM |
BS ISO 19712-3 : 2007
|
PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 3: DETERMINATION OF PROPERTIES - SOLID SURFACE SHAPES |
DIN EN ISO 19712-2 E : 2013
|
PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 2: DETERMINATION OF PROPERTIES - SHEET GOODS (ISO 19712-2:2007) |
BS ISO 20753 : 2008
|
PLASTICS - TEST SPECIMENS |
UNE-EN ISO 19712-2:2013
|
Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods (ISO 19712-2:2007) |
DIN EN 16506:2014-12
|
SYSTEMS FOR RENOVATION OF DRAINS AND SEWERS - LINING WITH A RIGIDLY ANCHORED PLASTICS INNER LAYER (RAPL) |
05/30137738 DC : DRAFT AUG 2005
|
ISO 9523 - TOURING SKI-BOOTS FOR ADULTS - INTERFACE WITH TOURING SKI-BINDINGS - REQUIREMENTS AND TEST METHODS |
I.S. EN 50131-2-8:2016
|
ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-8: INTRUSION DETECTORS - SHOCK DETECTORS |
DIN EN ISO 20753 E : 2014
|
PLASTICS - TEST SPECIMENS (ISO 20753:2008) |
DIN EN ISO 20753:2014-07
|
PLASTICS - TEST SPECIMENS (ISO 20753:2008) |
ASTM F 944 : 1997
|
Standard Specification for Properties of Adult Alpine Ski Boots (Withdrawn 2004) |
I.S. EN ISO 11833-1:2012
|
PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: SHEETS OF THICKNESS NOT LESS THAN 1 MM (ISO 11833-1:2012) |
DIN EN 14598-3:2005-07
|
Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements |
DIN EN ISO 8257-2 E : 2006
|
PLASTICS - POLY(METHYL METHACRYLATE) (PMMA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
DIN EN 14598-2:2005-07
|
Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 2: Methods of test and general requirements |
BS EN ISO 3167:2014
|
Plastics. Multipurpose test specimens |
ISO 15015:2011
|
Plastics Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) Requirements and test methods |
ONORM EN ISO 13000-2 : 2006
|
PLASTICS - POLYTETRAFLUOROETHYLENE (PTFE) SEMI-FINISHED PRODUCTS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
DIN ISO 5355:2006-05
|
ALPINE SKI-BOOTS - REQUIREMENTS AND TEST METHODS |
DIN EN 14879-4:2008-01
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 4: Linings on metallic components |
EN 12080:2017
|
Railway applications - Axleboxes - Rolling bearings |
DIN EN ISO 8257-2:2006-06
|
PLASTICS - POLY(METHYL METHACRYLATE) (PMMA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
EN 1337-2:2004
|
Structural bearings - Part 2: Sliding elements |
EN 50131-2-8:2016
|
Alarm systems - Intrusion and hold-up systems - Part 2-8: Intrusion detectors - Shock detectors |
EN 1337-5:2005
|
Structural bearings - Part 5: Pot bearings |
BS ISO 9523:2015
|
Touring ski-boots for adults. Interface with touring ski-bindings. Requirements and test methods |
05/30132990 DC : DRAFT APR 2005
|
ISO 20753 - PLASTICS - TEST SPECIMENS |
BS EN 50131-2-8:2016
|
Alarm systems. Intrusion and hold-up systems Intrusion detectors. Shock detectors |
BS ISO 19712-2 : 2007
|
PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 2: DETERMINATION OF PROPERTIES - SHEET GOODS |
06/30147348 DC : DRAFT MAR 2006
|
ISO 19712-3 - PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 3: DETERMINATION OF PROPERTIES - SOLID SURFACE SHAPES |
ISO 20753:2008
|
Plastics Test specimens |
BS ISO 8257-2:1990
|
Plastics. Poly(methyl methacrylate) (PMMA) moulding and extrusion materials Preparation of test specimens and determination of properties |
I.S. EN ISO 19712-2:2013
|
PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 2: DETERMINATION OF PROPERTIES - SHEET GOODS (ISO 19712-2:2007) |
UNI EN ISO 11833-1 : 2012
|
PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: SHEETS OF THICKNESS NOT LESS THAN 1 MM |
UNI EN ISO 19712-3 : 2013
|
PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 3: DETERMINATION OF PROPERTIES - SOLID SURFACE SHAPES |
IEC 62899-201:2016
|
Printed electronics - Part 201: Materials - Substrates |
DIN EN 14879-4 E : 2008
|
ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 4: LININGS ON METALLIC COMPONENTS |
DIN EN 12080:2015-06 (Draft)
|
RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS |
DIN EN ISO 14530-2:2000-08
|
Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14530-2:1999); German version EN ISO 14530-2:1999 |
DIN EN 1337-5:2005-07
|
Structural bearings - Part 5: Pot bearings |
BS EN ISO 14528-2:2000
|
Plastics. Melamine-formaldehyde powder moulding compounds (MF-PMCs) Preparation of test specimens and determination of properties |
BS EN 12080:2017
|
Railway applications. Axleboxes. Rolling bearings |
BS EN 1337-5:2005
|
Structural bearings Pot bearings |
BS EN 14598-2:2005
|
Reinforced thermosetting moulding compounds. Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC) Methods of test and general requirements |
BS EN 1337-2:2004
|
Structural bearings Sliding elements |
I.S. EN ISO 13000-2:2006
|
PLASTICS - POLYTETRAFLUOROETHYLENE (PTFE) SEMI-FINISHED PRODUCTS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
DIN ISO 9523:2016-05
|
TOURING SKI-BOOTS FOR ADULTS - INTERFACE WITH TOURING SKI-BINDINGS - REQUIREMENTS AND TEST METHODS (ISO 9523:2015) |
I.S. EN 12080:2017
|
RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS |
DIN EN ISO 11833-1:2012-11
|
PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: SHEETS OF THICKNESS NOT LESS THAN 1 MM (ISO 11833-1:2012) |
I.S. EN ISO 3167:2014
|
PLASTICS - MULTIPURPOSE TEST SPECIMENS (ISO 3167:2014) |
I.S. EN ISO 8257-2:2006
|
PLASTICS - POLY(METHYL METHACRYLATE) (PMMA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
ONORM ISO 5355 : 2006
|
ALPINE SKI-BOOTS - REQUIREMENTS AND TEST METHODS |
DIN EN 12080:2017-11
|
Railway applications - Axleboxes - Rolling bearings |
BS 3412:1992
|
Methods of specifying general purpose polyethylene materials for moulding and extrusion |
VDI/VDE 2616 Blatt 2:2014-07
|
Hardness testing of plastics and elastomers |
BS EN 16506:2014
|
Systems for renovation of drains and sewers. Lining with a rigidly anchored plastics inner layer (RAPL) |
BS EN ISO 19712-3:2013
|
Plastics. Decorative solid surfacing materials Determination of properties. Solid surface shapes |
PREN 16506 : DRAFT 2012
|
SYSTEMS FOR RENOVATION OF DRAINS AND SEWERS - LINING WITH A RIGIDLY ANCHORED PLASTICS INNER LAYER (RAPL) |
UNI EN 16506 : 2014
|
SYSTEMS FOR RENOVATION OF DRAINS AND SEWERS - LINING WITH A RIGIDLY ANCHORED PLASTICS INNER LAYER (RAPL) |
DIN ISO 5355 E : 2006
|
ALPINE SKI-BOOTS - REQUIREMENTS AND TEST METHODS |
BS EN ISO 15015:2011
|
Plastics. Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA). Requirements and test methods |
12/30274859 DC : 0
|
BS ISO 9523 - TOURING SKI-BOOTS FOR ADULTS - INTERFACE WITH TOURING SKI-BINDINGS - REQUIREMENTS AND TEST METHODS |
IEC TS 62989:2018
|
Primary optics for concentrator photovoltaic systems |
06/30137509 DC : DRAFT MAR 2006
|
ISO 19712-2 - PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 2: DETERMINATION OF PROPERTIES - SHEET GOODS |
04/30091878 DC : DRAFT FEB 2004
|
BS EN ISO 13000-2 - PLASTICS - POLYTETRAFLUOROETHYLENE (PTFE) SEMI-FINISHED PRODUCTS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
DIN EN ISO 15015:2011-07
|
Plastics - Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) - Requirements and test methods (ISO 15015:2011) |
I.S. EN ISO 20753:2014
|
PLASTICS - TEST SPECIMENS (ISO 20753:2008) |
I.S. EN ISO 19712-3:2013
|
PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 3: DETERMINATION OF PROPERTIES - SOLID SURFACE SHAPES (ISO 19712-3:2007) |
I.S. EN 60455-2:2015
|
RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST |
BS EN ISO 20753:2014
|
Plastics. Test specimens |
ISO 5355:2005
|
Alpine ski-boots Requirements and test methods |
ASTM D 5857 : 2017 : REDLINE
|
Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology |
ASTM D 5936 : 1996
|
Specification for Multipurpose Test Specimens (Withdrawn 1998) |
ISO 11833-1:2012
|
Plastics Unplasticized poly(vinyl chloride) sheets Types, dimensions and characteristics Part 1: Sheets of thickness not less than 1 mm |
DIN EN 1337-5 E : 2005
|
STRUCTURAL BEARINGS - PART 5: POT BEARINGS |
DIN EN 1337-2:2004-07
|
Structural bearings - Part 2: Sliding elements; German version EN 1337-2:2004 |
ISO 9523:2015
|
Touring ski-boots for adults — Interface with touring ski-bindings — Requirements and test methods |
UNE-EN ISO 11833-1:2012
|
Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 1: Sheets of thickness not less than 1 mm (ISO 11833-1:2012) |
EN 16506:2014
|
Systems for renovation of drains and sewers - Lining with a rigidly anchored plastics inner layer (RAPL) |
UNI EN ISO 3167 : 2014
|
PLASTICS - MULTIPURPOSE TEST SPECIMENS |
UNI EN 1337-2 : 2004
|
STRUCTURAL BEARINGS - PART 2: SLIDING ELEMENTS |
ONORM EN ISO 19712-3 : 2013
|
PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 3: DETERMINATION OF PROPERTIES - SOLID SURFACE SHAPES (ISO 19712-3:2007) |
BS EN ISO 19712-2:2013
|
Plastics. Decorative solid surfacing materials Determination of properties. Sheet goods |
12/30275810 DC : 0
|
BS EN 16506 - SYSTEMS FOR RENOVATION OF DRAINS AND SEWERS - LINING WITH A RIGIDLY ANCHORED PLASTICS INNER LAYER (RAPL) |
14/30304003 DC : 0
|
BS EN 62899-1 ED.1 - PRINTED ELECTRONICS - MATERIALS - PART 1: SUBSTRATES |
ONORM EN ISO 11833-1 : 2012
|
PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: SHEETS OF THICKNESS NOT LESS THAN 1 MM (ISO 11833-1:2012) |
07/30137506 DC : 0
|
BS ISO 19712-1 - PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 1: CLASSIFICATION AND SPECIFICATIONS |
BS EN 60455-2:2015
|
Resin based reactive compounds used for electrical insulation Methods of test |
BS 7825-3.3:1997
|
Calibration of rubber and plastics test equipment. Calibration schedules Mechanical properties of plastics |
UNE-EN 50131-2-8:2017
|
Alarm systems - Intrusion and hold-up systems - Part 2-8: Intrusion detectors - Shock detectors |
BS IEC 62899-201 : 2016
|
PRINTED ELECTRONICS - PART 201: MATERIALS - SUBSTRATES |
UNI EN ISO 20753 : 2014
|
PLASTICS - TEST SPECIMENS |
I.S. EN ISO 15015:2011
|
PLASTICS - EXTRUDED SHEETS OF IMPACT-MODIFIED ACRYLONITRILE-STYRENE COPOLYMERS (ABS, AEPDS AND ASA) - REQUIREMENTS AND TEST METHODS |
PREN ISO 11833-1 : DRAFT 2010
|
PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: SHEETS OF THICKNESS NOT LESS THAN 1 MM |
EN ISO 20753:2014
|
PLASTICS - TEST SPECIMENS (ISO 20753:2008) |
DIN EN 1337-2 E : 2004
|
STRUCTURAL BEARINGS - PART 2: SLIDING ELEMENTS |
DIN EN ISO 3167:2014-11
|
PLASTICS - MULTIPURPOSE TEST SPECIMENS (ISO 3167:2014) |
BS EN ISO 14529-2:2000
|
Plastics. Melamine/phenolic powder moulding compounds (MP-PMCs) Preparation of test specimens and determination of properties |
BS EN ISO 13000-2:2005
|
Plastics. Polytetrafluoroethylene (PTFE) semi-finished products Preparation of test specimens and determination of properties |
ISO 14528-2:1999
|
Plastics Melamine-formaldehyde powder moulding compounds (MF-PMCs) Part 2: Preparation of test specimens and determination of properties |
ISO 2039-2:1987
|
Plastics Determination of hardness Part 2: Rockwell hardness |
ISO 4613-2:1995
|
Plastics Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
BS EN 14879-4:2007
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Linings on metallic components |
ISO 14530-2:1999
|
Plastics Unsaturated-polyester powder moulding compounds (UP-PMCs) Part 2: Preparation of test specimens and determination of properties |
IEC 60455-2:2015
|
Resin based reactive compounds used for electrical insulation - Part 2: Methods of test |
ISO 8257-2:2001
|
Plastics Poly(methyl methacrylate) (PMMA) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
ISO 14529-2:1999
|
Plastics Melamine/phenolic powder moulding compounds (MP-PMCs) Part 2: Preparation of test specimens and determination of properties |
BS EN ISO 2039-2:2000
|
Determination of Rockwell hardness. Rockwell hardness Rockwell hardness |
BS EN ISO 14527-2:2000
|
Preparation of test specimens and determination of properties |
BS EN ISO 8257-2:2006
|
Plastics. Poly(methyl methacrylate) (PMMA) moulding and extrusion materials Preparation of test specimens and determination of properties |
BS EN 14598-3:2005
|
Reinforced thermosetting moulding compounds. Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC) Specific requirements |
BS EN ISO 11833-1:2012
|
Plastics. Unplasticized poly(vinyl chloride) sheets. Types, dimensions and characteristics Sheets of thickness not less than 1 mm |
ISO 13000-2:2005
|
Plastics Polytetrafluoroethylene (PTFE) semi-finished products Part 2: Preparation of test specimens and determination of properties |
ISO 3167:2014
|
Plastics Multipurpose test specimens |
ISO 19712-3:2007
|
Plastics Decorative solid surfacing materials Part 3: Determination of properties Solid surface shapes |
ISO 14526-2:1999
|
Plastics Phenolic powder moulding compounds (PF-PMCs) Part 2: Preparation of test specimens and determination of properties |
ISO 19712-2:2007
|
Plastics Decorative solid surfacing materials Part 2: Determination of properties Sheet goods |
UNE-EN ISO 3167:2014
|
Plastics - Multipurpose test specimens (ISO 3167:2014) |
BS EN ISO 14526-2:2000
|
Plastics. Phenolic powder moulding compounds (PF-PMCs) Preparation of test specimens and determination of properties |
EN ISO 8257-2:2006
|
Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 8257-2:2001) |
EN ISO 15252-2 : 1999
|
PLASTICS - EPOXY POWDER MOULDING COMPOUNDS (EP-PMCS) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
EN 14598-2:2005/AC:2006
|
REINFORCED THERMOSETTING MOULDING COMPOUNDS - SPECIFICATION FOR SHEET MOULDING COMPOUND (SMC) AND BULK MOULDING COMPOUND (BMC) - PART 2: METHODS OF TEST AND GENERAL REQUIREMENTS |
EN ISO 19712-2:2013
|
Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods (ISO 19712-2:2007) |
EN ISO 14529-2 : 1999
|
PLASTICS - MELAMINE/PHENOLIC POWDER MOULDING COMPOUNDS (MP-PMCS) - PART 2 - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
EN ISO 2039-2 : 1999
|
PLASTICS - DETERMINATION OF HARDNESS - PART 2 - ROCKWELL HARDNESS |
EN ISO 3167:2014
|
Plastics - Multipurpose test specimens (ISO 3167:2014) |
EN ISO 14530-2 : 1999
|
PLASTICS - UNSATURATED-POLYESTER POWDER MOULDING COMPOUNDS (UP-PMCS) - PART 2 - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
EN ISO 19712-3:2013
|
Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes (ISO 19712-3:2007) |
EN ISO 14528-2 : 1999
|
PLASTICS - MELAMINE/PHENOLIC POWDER MOULDING COMPOUNDS (MP-PMCS) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
EN ISO 11833-1:2012
|
Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 1: Sheets of thickness not less than 1 mm (ISO 11833-1:2012) |
EN 14598-3:2005
|
Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements |
EN ISO 15015:2011
|
Plastics - Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) - Requirements and test methods (ISO 15015:2011) |
EN 14879-4:2007
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 4: Linings on metallic components |
EN ISO 14527-2 : 1999
|
PLASTICS - UREA-FORMALDEHYDE AND UREA/MELAMINE-FORMALDEHYDE POWDER MOULDING COMPOUNDS (UF- AND UF/MF-PMCS) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
06/30130317 DC : DRAFT JULY 2006
|
ISO 11833-1 - PLASTICS - UNPLASTICIZED POLY (VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS |
UNI EN ISO 19712-2 : 2013
|
PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 2: DETERMINATION OF PROPERTIES - SHEET GOODS |
BS ISO 11833-1:1998
|
Plastics. Unplasticized poly(vinyl chloride) sheets. Tapes, dimensions and characteristics Sheets of thickness not less than 1 mm |
DIN EN ISO 19712-3:2013-09
|
PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 3: DETERMINATION OF PROPERTIES - SOLID SURFACE SHAPES (ISO 19712-3:2007) |
UNE-EN 16506:2015
|
Systems for renovation of drains and sewers - Lining with a rigidly anchored plastics inner layer (RAPL) |
UNE-EN ISO 19712-3:2013
|
Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes (ISO 19712-3:2007) |
I.S. EN 16506:2014
|
SYSTEMS FOR RENOVATION OF DRAINS AND SEWERS - LINING WITH A RIGIDLY ANCHORED PLASTICS INNER LAYER (RAPL) |
EN ISO 13000-2:2005
|
Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties (ISO 13000-2:2005) |
UNE-EN ISO 20753:2015
|
Plastics - Test specimens (ISO 20753:2008) |
BS EN 13199-3:2000
|
Packaging. Small load carrier systems Bond Stackable System (BSS) |
ISO 15252-2:1999
|
Plastics Epoxy powder moulding compounds (EP-PMCs) Part 2: Preparation of test specimens and determination of properties |
BS EN ISO 14631:1999
|
Extruded sheets of impact-modified polystyrene (PS-I). Requirements and test methods |
ISO 14527-2:1999
|
Plastics Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) Part 2: Preparation of test specimens and determination of properties |
BS EN ISO 14530-2:2000
|
Plastics. Unsaturated-polyester powder moulding compounds (UP-PMCs) Preparation of test specimens and determination of properties |
BS EN ISO 15252-2:2000
|
Plastics. Epoxy powder moulding compounds (EP-PMCs) Preparation of test specimens and determination of properties |
EN 13199-3:2000
|
Packaging - Small Load Carrier Systems - Part 3: Bond Stackable System (BSS) |
DIN EN ISO 13000-2:2006-02
|
Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties (ISO 13000-2:2005) |
EN 60455-2:2015
|
Resin based reactive compounds used for electrical insulation - Part 2: Methods of test |
BS 2782-3.365C(1992) : 1992 AMD 10694
|
PLASTICS - DETERMINATION OF HARDNESS - PART 2: ROCKWELL HARDNESS |