UNE-EN 15461:2008
|
Railway applications - Noise emission - Characterisation of the dynamic properties of track sections for pass by noise measurements |
BS ISO 16063-45:2017
|
Methods for the calibration of vibration and shock transducers In-situ calibration of transducers with built in calibration coil |
04/30065335 DC : DRAFT JAN 2004
|
BS ISO 16832 - ACOUSTICS - LOUDNESS SCALING BY MEANS OF CATEGORIES |
UNE-EN 16286-2:2014
|
Railway applications - Gangway systems between vehicles - Part 2: Acoustic measurements |
ISO 10302-1:2011
|
Acoustics — Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices — Part 1: Airborne noise measurement |
I.S. EN 1454:1998
|
PORTABLE, HAND-HELD, INTERNAL COMBUSTION CUTTING-OFF MACHINES - SAFETY |
10/30162951 DC : DRAFT MAY 2010
|
BS EN 61973 - HIGH VOLTAGE DIRECT CURRENT (HVDC) SUBSTATION AUDIBLE NOISE |
ISO 26101:2017
|
Acoustics Test methods for the qualification of free-field environments |
BS ISO 19924:2017
|
Space systems. Acoustic testing |
16/30341458 DC : 0
|
BS ISO 16063-45 - METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 45: IN-SITU CALIBRATION OF TRANSDUCERS WITH BUILT IN CALIBRATION COIL |
ISO 9568:1993
|
Cinematography — Background acoustic noise levels in theatres, review rooms and dubbing rooms |
BS ISO 10302-2:2011
|
Acoustics. Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices Structure-borne vibration measurements |
08/30182517 DC : DRAFT MAY 2008
|
BS ISO 16063-31 - METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 31: TESTING OF TRANSVERSE VIBRATION SENSITIVITY |
DIN ISO 2954 E : 2012
|
MECHANICAL VIBRATION OF ROTATING AND RECIPROCATING MACHINERY - REQUIREMENTS FOR INSTRUMENTS FOR MEASURING VIBRATION SEVERITY (ISO 2954:2012) |
PREN 15610 : DRAFT 2017
|
RAILWAY APPLICATIONS - ACOUSTICS - RAIL AND WHEEL ROUGHNESS MEASUREMENT RELATED TO ROLLING NOISE GENERATION |
CEI EN 60942 : 2004
|
ELECTROACOUSTICS SOUND CALIBRATORS |
I.S. EN 60952-1:2013
|
AIRCRAFT BATTERIES - PART 1: GENERAL TEST REQUIREMENTS AND PERFORMANCE LEVELS (IEC 60952-1:2013 (EQV)) |
BS ISO 10494:1993
|
Gas turbines and gas turbine sets. Measurement of emitted airborne noise. Engineering/survey method |
BS 848-2.6:2000
|
Fans for general purposes. Methods of noise testing Airborne noise emitted by small air-moving devices |
12/30257842 DC : 0
|
BS ISO 27327-2 - FANS - AIR CURTAIN UNITS - PART 2: LABORATORY METHODS OF TESTING FOR SOUND POWER |
BS EN 61252 : 1997
|
ELECTROACOUSTICS - SPECIFICATIONS FOR PERSONAL SOUND EXPOSURE METERS |
09/30191459 DC : 0
|
BS ISO 16063-41 - METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 41: CALIBRATION OF LASER VIBROMETERS |
ANSI S12.62 : 2012
|
ACOUSTICS - ATTENUATION OF SOUND DURING PROPAGATION OUTDOORS - PART 2: GENERAL METHOD OF CALCULATION |
ISO 3095:2013
|
Acoustics Railway applications Measurement of noise emitted by railbound vehicles |
05/30129922 DC : DRAFT FEB 2005
|
EN 15036-2 - HEATING BOILERS - TEST REGULATIONS FOR THE AIRBORNE NOISE EMISSIONS FROM HEAT GENERATORS - PART 2: FLUE GAS NOISE EMISSIONS AT THE OUTLET OF THE HEAT GENERATOR |
05/30128617 DC : DRAFT FEB 2005
|
IEC 60318-6 ED.1 - ELECTROACOUSTICS - SIMULATORS OF HUMAN HEAD AND EAR - PART 6: MECHANICAL COUPLER FOR THE MEASUREMENTS ON BONE VIBRATORS |
02/207105 DC : DRAFT JUN 2002
|
IEC 61606-1. ED.1 - AUDIO AND AUDIOVISUAL EQUIPMENT - DIGITAL AUDIO PARTS - BASIC MEASUREMENT METHODS OF AUDIO CHARACTERISTICS - PART 1: GENERAL |
04/30115861 DC : DRAFT JUL 2004
|
ISO 16063-15 - METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 15: PRIMARY ANGULAR VIBRATION CALIBRATION BY LASER INTERFEROMETRY |
BS EN 61096:1993
|
Methods of measuring the characteristics of reproducing equipment for digital audio compact discs |
BS ISO 226:2003
|
Acoustics. Normal equal-loudness-level contours |
BS ISO 13474:2009
|
Acoustics. Framework for calculating a distribution of sound exposure levels for impulsive sound events for the purposes of environmental noise assessment |
BS 848-2.2(2004) : 2004
|
INDUSTRIAL FANS - DETERMINATION OF FAN SOUND POWER LEVELS UNDER STANDARDIZED LABORATORY CONDITIONS - PART 2: REVERBERANT ROOM METHOD |
07/30166815 DC : 0
|
BS EN 60068-2-65 AMD1 - ENVIRONMENTAL TESTING - PART 2-65: METHODS OF TEST - TEST FG - VIBRATION, ACOUSTICALLY INDUCED |
BS EN ISO 389-9:2009
|
Acoustics. Reference zero for the calibration of audiometric equipment Preferred test conditions for the determination of reference hearing threshold levels |
BS EN 60645-1:2017
|
Electroacoustics. Audiometric equipment Equipment for pure-tone and speech audiometry |
15/30326444 DC : 0
|
BS EN 60942 - ELECTROACOUSTICS - SOUND CALIBRATORS |
95/213406 DC : DRAFT OCT 1995
|
|
BS 2497-7:1988
|
Standard reference zero for the calibration of pure tone air conduction audiometers Specification for a standard reference zero at frequencies intermediate between those given in Parts 5 and 6 of BS 2497 |
DD ISO/TS 13473-4:2008
|
Characterization of pavement texture by use of surface profiles Spectral analysis of texture profiles |
CEI EN 60318-6 : 2014
|
ELECTROACOUSTICS - SIMULATORS OF HUMAN HEAD AND EAR - PART 6: MECHANICAL COUPLER FOR THE MEASUREMENTS ON BONE VIBRATORS |
BS 848-2.1(2004) : 2004
|
INDUSTRIAL FANS - DETERMINATION OF FAN SOUND POWER LEVELS UNDER STANDARDIZED LABORATORY CONDITIONS - PART 1: GENERAL OVERVIEW |
IEC 60942 REDLINE : 4ED 2017
|
ELECTROACOUSTICS - SOUND CALIBRATORS |
I.S. EN ISO 3095:2013
|
ACOUSTICS - RAILWAY APPLICATIONS - MEASUREMENT OF NOISE EMITTED BY RAILBOUND VEHICLES (ISO 3095:2013) |
I.S. EN IEC 60942:2018
|
ELECTROACOUSTICS - SOUND CALIBRATORS |
ISO 8395:1995
|
Cinematography — Test films for the reproduction of 70 mm motion-picture release prints with magnetic stripes — Specifications |
ISO 2969:2015
|
Cinematography — B-chain electro-acoustic reponse of motion-picture control rooms and indoor theatres — Specifications and measurements |
UNI EN 15610 : 2009
|
RAILWAY APPLICATIONS - NOISE EMISSION - RAIL ROUGHNESS MEASUREMENT RELATED TO ROLLING NOISE GENERATION |
PD IEC/TS 61973:2012
|
High voltage direct current (HVDC) substation audible noise |
CEI EN 60952-1 : 2014
|
AIRCRAFT BATTERIES - PART 1: GENERAL TEST REQUIREMENTS AND PERFORMANCE LEVELS |
I.S. EN 61252:1996
|
ELECTROACOUSTICS - SPECIFICATIONS FOR PERSONAL SOUND EXPOSURE METERS |
I.S. EN 15461:2008
|
RAILWAY APPLICATIONS - NOISE EMISSION - CHARACTERISATION OF THE DYNAMIC PROPERTIES OF TRACK SECTIONS FOR PASS BY NOISE MEASUREMENTS |
I.S. EN 60068-2-81:2003
|
ENVIRONMENTAL TESTING - PART 2-81: TESTS - TEST EI: SHOCK - SHOCK RESPONSE SPECTRUM SYNTHESIS |
EN ISO 389-7:2005/A1:2016
|
ACOUSTICS - REFERENCE ZERO FOR THE CALIBRATION OF AUDIOMETRIC EQUIPMENT - PART 7: REFERENCE THRESHOLD OF HEARING UNDER FREE-FIELD AND DIFFUSE-FIELD LISTENING CONDITIONS (ISO 389-7:2005) |
BS EN ISO 8253-3:2012
|
Acoustics. Audiometric test methods Speech audiometry |
UNE-EN ISO 3381:2011
|
Railway applications - Acoustics - Measurement of noise inside railbound vehicles (ISO 3381:2005) |
BS EN ISO 10846-2:2008
|
Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements Direct method for determination of the dynamic stiffness of resilient supports for translatory motion |
BS EN ISO 7731:2008
|
Ergonomics. Danger signals for public and work areas. Auditory danger signals |
BS EN ISO 10846-4:2003
|
Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements Dynamic stiffness of elements other than resilient supports for translatory motion |
EN 60645-2:1997
|
Audiometers - Part 2: Equipment for speech audiometry |
DIN EN ISO 354:2003-12
|
ACOUSTICS - MEASUREMENT OF SOUND ABSORPTION IN A REVERBERATION ROOM |
EN 60068-2-81:2003
|
Environmental testing - Part 2-81: Tests - Test Ei: Shock - Shock response spectrum synthesis |
EN 61096:1993/A1:1996
|
METHODS OF MEASURING THE CHARACTERISTICS OF REPRODUCING EQUIPMENT FOR DIGITAL AUDIO COMPACT DISCS |
EN 60500:2017
|
Underwater acoustics - Hydrophones - Properties of hydrophones in the frequency range 1 Hz to 500 kHz |
EN 61669:2016
|
Electroacoustics - Measurement of real-ear acoustical performance characteristics of hearing aids |
EN ISO 16251-1:2014
|
Acoustics - Laboratory measurement of the reduction of transmitted impact noise by floor coverings on a small floor mock-up - Part 1: Heavyweight compact floor (ISO 16251-1:2014) |
BS EN ISO 354:2003
|
Acoustics. Measurement of sound absorption in a reverberation room |
I.S. EN ISO 10534-2:2001
|
ACOUSTICS - DETERMINATION OF SOUND ABSORPTION COEFFICIENT AND IMPEDANCE IN IMPEDANCES TUBES - PART 2: TRANSFER-FUNCTION METHOD |
10/30197204 DC : 0
|
BS ISO 26101 - ACOUSTICS - TEST METHODS FOR THE QUALIFICATION OF FREE-FIELD ENVIRONMENTS |
BS EN 60952-1:2013
|
Aircraft batteries General test requirements and performance levels |
BS EN 60318-6:2008
|
Electroacoustics. Simulators of human head and ear Mechanical coupler for the measurement of bone vibrators |
11/30229157 DC : 0
|
BS ISO 17497-2 - ACOUSTICS - SOUND-SCATTERING PROPERTIES OF SURFACES - PART 2: MEASUREMENT OF THE DIRECTIONAL DIFFUSION COEFFICIENT IN A FREE FIELD |
BS ISO 28961:2012
|
Acoustics. Statistical distribution of hearing thresholds of otologically normal persons in the age range from 18 years to 25 years under free-field listening conditions |
10/30213857 DC : 0
|
BS ISO 8253-3 - ACOUSTICS - AUDIOMETRIC TEST METHODS - PART 3: SPEECH AUDIOMETRY |
08/30177421 DC : DRAFT AUG 2008
|
BS ISO 10302-2 - ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED AND STRUCTURE-BORNE VIBRATION INDUCED BY SMALL AIR MOVING DEVICES - PART 2: STRUCTURE-BORNE VIBRATION MEASUREMENTS |
DIN EN 15461 E : 2011
|
RAILWAY APPLICATIONS - NOISE EMISSION - CHARACTERISATION OF THE DYNAMIC PROPERTIES OF TRACK SECTIONS FOR PASS BY NOISE MEASUREMENTS |
ISO/TS 13473-4:2008
|
Characterization of pavement texture by use of surface profiles — Part 4: Spectral analysis of surface profiles |
04/30095174 DC : DRAFT JUN 2004
|
ISO 389-7 - ACOUSTICS - REFERENCE ZERO FOR THE CALIBRATION OF AUDIOMETRIC EQUIPMENT - PART 7: REFERENCE THRESHOLD OF HEARING UNDER FREE-FIELD AND DIFFUSE-FIELD LISTENING CONDITIONS |
BS EN 60942:2003
|
Electroacoustics. Sound calibrators |
SAE ARP 1307 : 2013
|
MEASUREMENT OF EXTERIOR NOISE PRODUCED BY AIRCRAFT AUXILIARY POWER UNITS (APUS) AND ASSOCIATED EQUIPMENT DURING GROUND OPERATION |
BS 4196-4:1981
|
Sound power levels of noise sources Engineering methods for determination of sound power levels for sources in free-field conditions over a reflecting plane |
BS ISO 27327-2:2014
|
Fans. Air curtain units Laboratory methods of testing for sound power |
14/30313972 DC : 0
|
BS EN 60645-1 ED.4.0 - ELECTROACOUSTICS - AUDIOMETRIC EQUIPMENT - PART 1: EQUIPMENT FOR PURE-TONE AND SPEECH AUDIOMETRY |
ISO 17497-1:2004
|
Acoustics — Sound-scattering properties of surfaces — Part 1: Measurement of the random-incidence scattering coefficient in a reverberation room |
05/30064424 DC : DRAFT NOV 2005
|
ISO 10846-5 - ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 5: LOW FREQUENCY DYNAMIC STIFFNESS OF ELASTIC SUPPORTS FOR TRANSLATORY MOTION (DRIVING POINT METHOD) |
I.S. EN ISO 16251-1:2014
|
ACOUSTICS - LABORATORY MEASUREMENT OF THE REDUCTION OF TRANSMITTED IMPACT NOISE BY FLOOR COVERINGS ON A SMALL FLOOR MOCK-UP - PART 1: HEAVYWEIGHT COMPACT FLOOR (ISO 16251-1:2014) |
DIN ISO 2954:2012-10
|
Mechanical vibration of rotating and reciprocating machinery - Requirements for instruments for measuring vibration severity (ISO 2954:2012) |
BS 848-2.5(2003) : 2003
|
ACOUSTICS - DETERMINATION OF SOUND POWER RADIATED INTO A DUCT BY FANS AND OTHER AIR-MOVING DEVICES - IN-DUCT METHOD |
DD ENV 28041:1993
|
Human response to vibration. Measuring instrumentation |
BS EN ISO 16251-1:2014
|
Acoustics. Laboratory measurement of the reduction of transmitted impact noise by floor coverings on a small floor mock-up Heavyweight compact floor |
BS ISO 17497-1 : 2004
|
ACOUSTICS - SOUND-SCATTERING PROPERTIES OF SURFACES - PART 1: MEASUREMENT OF THE RANDOM-INCIDENCE SCATTERING COEFFICIENT IN A REVERBERATION ROOM |
BS ISO 16063-15:2006
|
Methods for the calibration of vibration and shock transducers Primary angular vibration calibration by laser interferometry |
UNI ISO 13347-1 : 2009
|
INDUSTRIAL FANS - DETERMINATION OF FAN SOUND POWER LEVELS UNDER STANDARDIZED LABORATORY CONDITIONS - PART 1: GENERAL OVERVIEW |
BS EN 60068-2-65:2013
|
Environmental testing Tests. Test Fg: Vibration. Acoustically induced method |
BS ISO/IEC 8613-9:1996
|
Information processing. Text and office systems. Office document architecture (ODA) and interchange format Audio content architectures |
BS EN 61606:1997
|
Audio and audiovisual equipment. Digital audio parts. Basic methods of measurement of audio characteristics |
I.S. EN 60942:2003
|
ELECTROACOUSTICS - SOUND CALIBRATORS |
CEI EN 60068-2-65 : 2013
|
ENVIRONMENTAL TESTING - PART 2-65: TESTS - TEST FG: VIBRATION - ACOUSTICALLY INDUCED METHOD |
BS EN 60068-2-81:2003
|
Environmental testing. Test methods Test Ei. Shock. Shock response spectrum synthesis |
17/30359986 DC : 0
|
BS EN ISO 7779 - ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED BY INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS EQUIPMENT |
02/207106 DC : DRAFT JUN 2002
|
IEC 61606-2. ED.1 - AUDIO AND AUDIOVISUAL EQUIPMENT - DIGITAL AUDIO PARTS - BASIC MEASUREMENT METHODS OF AUDIO CHARACTERISTICS - PART 2: CONSUMER USE |
ANSI S12.10:2002(R2007)
|
ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED BY INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS EQUIPMENT |
ISO 13347-2:2004
|
Industrial fans — Determination of fan sound power levels under standardized laboratory conditions — Part 2: Reverberant room method |
ISO 2954:2012
|
Mechanical vibration of rotating and reciprocating machinery — Requirements for instruments for measuring vibration severity |
IEEE/ANSI C63.19-2011 REDLINE
|
American National Standard Methods of Measurement of Compatibility between Wireless Communications Devices and Hearing Aids |
BS ISO 13347-1 : 2004
|
INDUSTRIAL FANS - DETERMINATION OF FAN SOUND POWER LEVELS UNDER STANDARDIZED LABORATORY CONDITIONS - PART 1: GENERAL OVERVIEW |
ISO 19924:2017
|
Space systems — Acoustic testing |
BS EN 15461 : 2008
|
RAILWAY APPLICATIONS - NOISE EMISSION - CHARACTERISATION OF THE DYNAMIC PROPERTIES OF TRACK SECTIONS FOR PASS BY NOISE MEASUREMENTS |
ISO 28961:2012
|
Acoustics — Statistical distribution of hearing thresholds of otologically normal persons in the age range from 18 years to 25 years under free-field listening conditions |
I.S. EN 15892:2011
|
RAILWAY APPLICATIONS - NOISE EMISSION - MEASUREMENT OF NOISE INSIDE DRIVER'S CABS |
CEI EN 60500 : 1ED 2017
|
UNDERWATER ACOUSTICS - HYDROPHONES - PROPERTIES OF HYDROPHONES IN THE FREQUENCY RANGE 1 HZ TO 500 KHZ |
ANSI S12.62 : 2012(R2017)
|
ACOUSTICS - ATTENUATION OF SOUND DURING PROPAGATION OUTDOORS - PART 2: GENERAL METHOD OF CALCULATION |
S.R. CEN/TR 16891:2016
|
RAILWAY APPLICATIONS - ACOUSTICS - MEASUREMENT METHOD FOR COMBINED ROUGHNESS, TRACK DECAY RATES AND TRANSFER FUNCTIONS |
UNI EN ISO 7779 : 2010
|
ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED BY INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS EQUIPMENT |
UNI EN ISO 389-9 : 2009
|
ACOUSTICS - REFERENCE ZERO FOR THE CALIBRATION OF AUDIOMETRIC EQUIPMENT - PART 9: PREFERRED TEST CONDITIONS FOR THE DETERMINATION OF REFERENCE HEARING THRESHOLD LEVELS |
EN 61260:1995/A1:2001
|
ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS |
IEC 60645-1:2017
|
Electroacoustics - Audiometric equipment - Part 1: Equipment for pure-tone and speech audiometry |
DIN EN ISO 8253-3 E : 2012
|
ACOUSTICS - AUDIOMETRIC TEST METHODS - PART 3: SPEECH AUDIOMETRY (ISO 8253-3:2012) |
ISO 5136:2003
|
Acoustics — Determination of sound power radiated into a duct by fans and other air-moving devices — In-duct method |
IEC 60645-2:1993
|
Audiometers - Part 2: Equipment for speech audiometry |
ISO 10846-3:2002
|
Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion |
IEC 61260:1995
|
Electroacoustics - Octave-band and fractional-octave-band filters |
DIN EN ISO 8253-3:2012-08
|
Acoustics - Audiometric test methods - Part 3: Speech audiometry (ISO 8253-3:2012) |
ECMA 275 : 3ED 2015
|
MEASUREMENT OF STRUCTURE-BORNE VIBRATION INDUCED BY SMALL AIR MOVING DEVICES |
I.S. EN ISO 3381:2011
|
RAILWAY APPLICATIONS - ACOUSTICS - MEASUREMENT OF NOISE INSIDE RAILBOUND VEHICLES |
I.S. EN ISO 8253-3:2012
|
ACOUSTICS - AUDIOMETRIC TEST METHODS - PART 3: SPEECH AUDIOMETRY (ISO 8253-3:2012) |
I.S. EN ISO 8253-2:2009
|
ACOUSTICS - AUDIOMETRIC TEST METHODS - PART 2: SOUND FILED AUDIOMETRY WITH PURE-TONE AND NARROW-BAND TEST SIGNALS |
I.S. EN ISO 5136:2009
|
ACOUSTICS - DETERMINATION OF SOUND POWER RADIATED INTO A DUCT BY FANS AND OTHER AIR-MOVING DEVICES - IN-DUCT METHOD |
DIN EN 15036-2:2006-12
|
Heating boilers - Test regulations for airborne noise emissions from heat generators - Part 2: Flue gas noise emissions at the outlet of the heat generator |
I.S. EN ISO 7731:2008
|
ERGONOMICS - DANGER SIGNALS FOR PUBLIC AND WORK AREAS - AUDITORY DANGER SIGNALS |
IEC 60942:2017 RLV
|
Electroacoustics - Sound calibrators |
DIN EN ISO 7779:2011-01
|
ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED BY INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS EQUIPMENT |
DIN ISO 226:2006-04
|
ACOUSTICS - NORMAL EQUAL-LOUDNESS-LEVEL CONTOURS |
I.S. EN ISO 10846-2:2008
|
ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBROACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 2: DIRECT METHOD FOR DETERMINATION OF THE DYNAMIC STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION |
BS 4196-1:1991
|
Sound power levels of noise sources Precision methods for determination of sound power levels for broad-band sources in reverberation rooms |
BS 4196-2:1991
|
Sound power levels of noise sources Precision methods for determination of sound power levels for discrete-frequency and narrow-band sources in reverberation rooms |
BS 6288-2(1990) : 1990 AMD 8299
|
MAGNETIC TAPE SOUND RECORDING AND REPRODUCING SYSTEMS - SPECIFICATION FOR CALIBRATION TAPES |
VDI 3766:2012-09
|
Ultrasound - Workplace - Measurement, assessment, judgement and reduction |
VDI 2057-1 : 2017 COR 1 2017
|
HUMAN EXPOSURE TO MECHANICAL VIBRATIONS - WHOLE-BODY VIBRATION |
VDI 3743 Blatt 1:2003-09
|
Characteristic noise emission values of technical sound sources - Pumps; Centrifugal pumps |
BS 3383:1988
|
Specification for normal equal-loudness level contours for pure tones under free-field listening conditions |
BS 848-9:2007
|
Fans for general purposes. Tolerances, methods of conversion and technical data presentation |
DIN EN 15892 E : 2011
|
RAILWAY APPLICATIONS - NOISE EMISSION - MEASUREMENT OF NOISE INSIDE DRIVER'S CABS |
BS 848-9:2006
|
Fans for general purposes Tolerances, methods of conversion and technical data presentation |
10/30214903 DC : 0
|
BS EN ISO 3095 - RAILWAY APPLICATIONS - ACOUSTICS - MEASUREMENT OF NOISE EMITTED BY RAILBOUND VEHICLES |
BS ISO 8395:1995
|
Cinematography. Test films for the reproduction of 70 mm motion-picture release prints with magnetic stripes. Specifications |
ISO 12611:2004
|
Cinematography — Audio head tones for use in international exchange of 35 mm analogue magnetic film masters — Specifications and location |
ISO 16832:2006
|
Acoustics Loudness scaling by means of categories |
AECTP-400 : 2006
|
MECHANICAL ENVIRONMENTAL TESTS |
DIN EN ISO 389-9:2009-12
|
Acoustics - Reference zero for the calibration of audiometric equipment - Part 9: Preferred test conditions for the determination of reference hearing threshold levels (ISO 389-9:2009) |
BS ISO 9568:1993
|
Cinematography. Background acoustic noise levels in the theatres, review rooms and dubbing rooms |
BS EN 60645-4:1995
|
Audiometers Equipment for extended high-frequency audiometry |
BS ISO 10302-1:2011
|
Acoustics. Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices Airborne noise measurement |
BS EN 60645-2:1997
|
Audiometers Equipment for speech audiometry |
BS EN 60500:2017
|
Underwater acoustics. Hydrophones. Properties of hydrophones in the frequency range 1 Hz to 500 kHz |
UNI ISO 28961 : 2012
|
ACOUSTICS - STATISTICAL DISTRIBUTION OF HEARING THRESHOLDS OF OTOLOGICALLY NORMAL PERSONS IN THE AGE RANGE FROM 18 YEARS TO 25 YEARS UNDER FREE-FIELD LISTENING CONDITIONS |
17/30333265 DC : 0
|
BS EN ISO 389-1 - ACOUSTICS - REFERENCE ZERO FOR THE CALIBRATION OF AUDIOMETRIC EQUIPMENT - PART 1: REFERENCE EQUIVALENT THRESHOLD SOUND PRESSURE LEVELS FOR PURE TONES AND SUPRA-AURAL EARPHONES |
13/30282677 DC : 0
|
BS EN 61669 ED.2 - ELECTROACOUSTICS - MEASUREMENT OF REAL-EAR ACOUSTICAL PERFORMANCE CHARACTERISTICS OF HEARING AIDS |
10/30214511 DC : 0
|
BS ISO 28961 - ACOUSTICS - STATISTICAL DISTRIBUTION OF NORMAL HEARING THRESHOLDS UNDER FREE-FIELD LISTENING CONDITIONS |
BS ISO 4834:1997
|
Cinematography. Magnetic sound test films excluding striped release prints. Basic technical characteristics |
BS ISO 2969:2015
|
Cinematography. B-chain electroacoustic reponse of motion-picture control rooms and indoor theatres. Specifications and measurements |
BS ISO 16832:2006
|
Acoustics. Loudness scaling by means of categories |
BS ISO 16063-12:2002
|
Methods for the calibration of vibration and shock transducers Primary vibration calibration by the reciprocity method |
15/30328565 DC : 0
|
BS EN 60645-1 ED4.0 - ELECTROACOUSTICS - AUDIOMETRIC EQUIPMENT - PART 1: EQUIPMENT FOR PURE-TONE AND SPEECH AUDIOMETRY |
BS ISO 7731 : 2003 AMD 16047
|
ERGONOMICS - DANGER SIGNALS FOR PUBLIC AND WORK AREAS - AUDITORY DANGER SIGNALS |
UNE-ISO 226:2013
|
Acoustics -- Normal equal-loudness-level contours |
BS ISO 12611:2004
|
Cinematography. Audio head tones for use in international exchange of 35 mm analogue magnetic film masters. Specifications and location |
BS 3549-2:1981
|
Methods of measuring and expressing the performance of television receivers Electrical and acoustic measurements at audio-frequencies |
UNE-EN ISO 16251-1:2015
|
Acoustics - Laboratory measurement of the reduction of transmitted impact noise by floor coverings on a small floor mock-up - Part 1: Heavyweight compact floor (ISO 16251-1:2014) |
BS 4196-5:1981
|
Sound power levels of noise sources Precision methods for determination of sound power levels for sources in anechoic and semi-anechoic rooms |
BS 7458-1:1991
|
Test code for the measurement of airborne noise emitted by rotating electrical machinery Engineering method for free-field conditions over a reflecting plane |
BS ISO 13347-2:2004
|
Industrial fans. Determination of fan sound power levels under standardized laboratory conditions Reverberant room method |
99/200338 DC : DRAFT JAN 1999
|
IEC 21/466/CD - AIRCRAFT BATTERIES - PART 1: GENERAL TEST REQUIREMENTS AND PERFORMANCE LEVELS |
DIN EN ISO 10846-5:2009-07
|
ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 5: DRIVING POINT METHOD FOR DETERMINATION OF THE LOW-FREQUENCY TRANSFER STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION |
IEC 60500:2017
|
Underwater acoustics - Hydrophones - Properties of hydrophones in the frequency range 1 Hz to 500 kHz |
ANSI S12.10 : 2002
|
ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED BY INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS EQUIPMENT |
ISO 9613-1:1993
|
Acoustics Attenuation of sound during propagation outdoors Part 1: Calculation of the absorption of sound by the atmosphere |
I.S. EN 60068-2-65:2013
|
ENVIRONMENTAL TESTING - PART 2-65: TESTS - TEST FG: VIBRATION - ACOUSTICALLY INDUCED METHOD (IEC 60068-2-65:2013 (EQV)) |
I.S. EN 60645-1:2017
|
ELECTROACOUSTICS - AUDIOMETRIC EQUIPMENT - PART 1: EQUIPMENT FOR PURE-TONE AND SPEECH AUDIOMETRY |
ISO 226:2003
|
Acoustics — Normal equal-loudness-level contours |
ISO 3742:1988
|
Acoustics — Determination of sound power levels of noise sources — Precision methods for discrete-frequency and narrow-band sources in reverberation rooms |
I.S. EN ISO 10846-5:2009
|
ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBROACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 5: DRIVING POINT METHOD FOR DETERMINATION OF THE LOW-FREQUENCY TRANSFER STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION |
ANSI S12.15 : 1992 : R2007
|
FOR ACOUSTICS - PORTABLE ELECTRIC POWER TOOLS, STATIONARY AND FIXED ELECTRIC POWER TOOLS, AND GARDENING APPLIANCES - MEASUREMENT OF SOUND EMITTED |
ANSI S12.11-2 : 2013
|
ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED AND STRUCTURE-BORNE VIBRATION INDUCED BY SMALL AIR-MOVING DEVICES - PART 2: STRUCTURE-BORNE VIBRATION MEASUREMENTS |
ANSI S12.11-1 : 2013
|
ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED AND STRUCTURE-BORNE VIBRATION INDUCED BY SMALL AIR-MOVING DEVICES - PART 1: AIRBORNE NOISE MEASUREMENT |
UNI EN 16286-2 : 2013
|
RAILWAY APPLICATIONS - GANGWAY SYSTEMS BETWEEN VEHICLES - PART 2: ACOUSTIC MEASUREMENTS |
BS EN ISO 7779:2010
|
Acoustics. Measurement of airborne noise emitted by information technology and telecommunications equipment |
IEC 60942:2017
|
Electroacoustics - Sound calibrators |
NF EN ISO 7779 : 2010
|
ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED BY INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS EQUIPMENT |
ISO 7779:2010
|
Acoustics Measurement of airborne noise emitted by information technology and telecommunications equipment |
IEC TS 61973:2012
|
High voltage direct current (HVDC) substation audible noise |
DIN EN ISO 389-7 E : 1998
|
ACOUSTICS - REFERENCE ZERO FOR THE CALIBRATION OF AUDIOMETRIC EQUIPMENT - PART 7: REFERENCE THRESHOLD OF HEARING UNDER FREE-FIELD AND DIFFUSE-FIELD LISTENING CONDITIONS |
BS EN ISO 10534-2:2001
|
Acoustics. Determination of sound absorption coefficient and impedance in impedance tubes Transfer-function method |
ISO 8253-2:2009
|
Acoustics Audiometric test methods Part 2: Sound field audiometry with pure-tone and narrow-band test signals |
UNE-EN ISO 8253-2:2010
|
Acoustics - Audiometric test methods - Part 2: Sound field audiometry with pure-tone and narrow-band test signals (ISO 8253-2:2009) |
UNE-EN ISO 5136:2010
|
Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method (ISO 5136:2003) |
IEC 60645-4:1994
|
Audiometers - Part 4: Equipment for extended high-frequency audiometry |
ISO 8297:1994
|
Acoustics — Determination of sound power levels of multisource industrial plants for evaluation of sound pressure levels in the environment — Engineering method |
IEC 61183:1994
|
Electroacoustics - Random-incidence and diffuse-field calibration of sound level meters |
IEC 60068-2-65:2013
|
Environmental testing - Part 2-65: Tests - Test Fg: Vibration - Acoustically induced method |
ISO 10846-2:2008
|
Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion |
BS EN ISO 8253-2:2009
|
Acoustics. Audiometric test methods Sound field audiometry with pure-tone and narrow-band test signals |
ANSI/ASA S12.10 PART 1:2010(R2020)
|
ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED BY INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS EQUIPMENT - PART 1: DETERMINATION OF SOUND POWER LEVEL AND EMISSION SOUND PRESSURE LEVEL |
EN 15036-2:2006
|
Heating boilers - Test regulations for airborne noise emissions from heat generators - Part 2: Flue gas noise emissions at the outlet of the heat generator |
UNI EN ISO 10846-5 : 2009
|
ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 5: DRIVING POINT METHOD FOR DETERMINATION OF THE LOW-FREQUENCY TRANSFER STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION |
UNI EN ISO 3095 : 2013
|
ACOUSTICS - RAILWAY APPLICATIONS - MEASUREMENT OF NOISE EMITTED BY RAILBOUND VEHICLES |
UNI EN ISO 7731 : 2009
|
ERGONOMICS - DANGER SIGNALS FOR PUBLIC AND WORK AREAS - AUDITORY DANGER SIGNALS |
UNI EN ISO 10846-2 : 2008
|
ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 2: DIRECT METHOD FOR DETERMINATION OF THE DYNAMIC STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION |
UNI EN ISO 5136 : 2009
|
ACOUSTICS - DETERMINATION OF SOUND POWER RADIATED INTO A DUCT BY FANS AND OTHER AIR-MOVING DEVICES - IN-DUCT METHOD |
UNI EN ISO 8253-2 : 2010
|
ACOUSTICS - AUDIOMETRIC TEST METHODS - PART 2: SOUND FIELD AUDIOMETRY WITH PURE-TONE AND NARROW-BAND TEST SIGNALS |
ONORM EN ISO 8253-3 : 2012
|
ACOUSTICS - AUDIOMETRIC TEST METHODS - PART 3: SPEECH AUDIOMETRY (ISO 8253-3:2012) |
ISO 16063-15:2006
|
Methods for the calibration of vibration and shock transducers Part 15: Primary angular vibration calibration by laser interferometry |
UNI EN 15892 : 2011
|
RAILWAY APPLICATIONS - NOISE EMISSION - MEASUREMENT OF NOISE INSIDE DRIVER'S CABS |
DIN EN ISO 16251-1 E : 2014
|
ACOUSTICS - LABORATORY MEASUREMENT OF THE REDUCTION OF TRANSMITTED IMPACT NOISE BY FLOOR COVERINGS ON A SMALL FLOOR MOCK-UP - PART 1: HEAVYWEIGHT COMPACT FLOOR (ISO 16251-1:2014) |
DIN EN 16286-2:2013-09
|
Railway applications - Gangway systems between vehicles - Part 2: Acoustic measurements |
UNI ISO 9613-2 : 2006
|
ACOUSTICS - ATTENUATION OF SOUND DURING PROPAGATION OUTDOORS - PART 2: GENERAL METHOD OF CALCULATION |
I.S. EN 60500:2017
|
UNDERWATER ACOUSTICS - HYDROPHONES - PROPERTIES OF HYDROPHONES IN THE FREQUENCY RANGE 1 HZ TO 500 KHZ |
BS EN ISO 10846-5:2009
|
Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion |
I.S. EN ISO 354:2003
|
ACOUSTICS - MEASUREMENT OF SOUND ABSORPTION IN A REVERBERATION ROOM |
BS ISO 8297:1994
|
Acoustics. Determination of sound power levels of multisource industrial plants for evaluation of sound pressure levels in the environment. Engineering method |
09/30192362 DC : 0
|
BS EN 15892 - RAILWAY APPLICATIONS - NOISE EMISSION - MEASUREMENT OF NOISE INSIDE DRIVER'S CABS |
08/30103108 DC : DRAFT FEB 2008
|
BS ISO 13474 - ACOUSTICS - FRAMEWORK FOR CALCULATING A DISTRIBUTION OF SOUND EXPOSURE LEVELS OF IMPULSIVE SOUND EVENTS FOR PURPOSES OF ENVIRONMENTAL NOISE ASSESSMENT |
08/30176438 DC : DRAFT JAN 2008
|
BS EN 60645-1 - ELECTRO ACOUSTICS - AUDIOMETRIC EQUIPMENT - PART 1: PURE-TONE AUDIOMETERS |
DD ISO/TS 13474:2003
|
Acoustics. Impulse sound propagation for environmental noise assessment |
BS EN 61183:1995
|
Electroacoustics. Random-incidence and diffuse-field calibration of sound level meters |
BS 5969:1981
|
Specification for sound level meters |
07/30098123 DC : 0
|
BS ISO 10302-1 - ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED AND STRUCTURE-BORNE VIBRATION INDUCED BY SMALL AIR-MOVING DEVICES - PART 1: AIRBORNE NOISE MEASUREMENT |
BS ISO 26101:2017
|
Acoustics. Test methods for the qualification of free-field environments |
I.S. EN ISO 7779:2010
|
ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED BY INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS EQUIPMENT |
DIN EN 15610:2009-08
|
Railway applications - Noise emission - Rail roughness measurement related to rolling noise generation |
BS ISO 17497-2:2012
|
Acoustics. Sound-scattering properties of surfaces Measurement of the directional diffusion coefficient in a free field |
07/30166205 DC : 0
|
BS ISO 389-9 - ACOUSTICS - REFERENCE ZERO FOR THE CALIBRATION OF AUDIOMETRIC EQUIPMENT - PART 9: PREFERRED TEST CONDITIONS FOR THE DETERMINATION OF REFERENCE HEARING THRESHOLD LEVELS |
I.S. EN 27917:1992
|
ACOUSTICS - MEASUREMENT AT THE OPERATOR'S POSITION OF AIRBORNE NOISE EMITTED BY BRUSH SAWS |
CEI EN 61012 : 1999
|
FILTERS FOR THE MEASUREMENT OF AUDIBLE SOUND IN THE PRESENCE OF ULTRASOUND |
17/30311287 DC : 0
|
BS ISO 19924 - SPACE SYSTEMS - ACOUSTIC TESTING |
BS EN 61260:1996
|
Electroacoustics. Octave-band and fractional-octave-band filters |
ISO 16063-31:2009
|
Methods for the calibration of vibration and shock transducers Part 31: Testing of transverse vibration sensitivity |
05/30103114 DC : DRAFT NOV 2005
|
ISO 10846-2 - ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 2: DYNAMIC STIFFNESS OF ELASTIC SUPPORTS FOR TRANSLATORY MOTION - DIRECT METHOD |
UNI EN 15461 : 2011
|
RAILWAY APPLICATIONS - NOISE EMISSION - CHARACTERISATION OF THE DYNAMIC PROPERTIES OF TRACK SECTIONS FOR PASS BY NOISE MEASUREMENTS |
ICAO 7300 ANNEX 16 VOL.1 : 2011
|
ANNEX 16 TO THE CONVENTION ON INTERNATIONAL CIVIL AVIATION (ICAO 7300) - ENVIRONMENTAL PROTECTION - VOLUME 1: AIRCRAFT NOISE |
I.S. EN 15610:2009
|
RAILWAY APPLICATIONS - NOISE EMISSION - RAIL ROUGHNESS MEASUREMENT RELATED TO ROLLING NOISE GENERATION |
I.S. EN ISO 389-9:2009
|
ACOUSTICS - REFERENCE ZERO FOR THE CALIBRATION OF AUDIOMETRIC EQUIPMENT - PART 9: PREFERRED TEST CONDITIONS FOR THE DETERMINATION OF REFERENCE HEARING THRESHOLD LEVELS |
ANSI S1.4 : 1983
|
SPECIFICATION FOR SOUND LEVEL METERS |
BS EN 15610:2009
|
Railway applications. Noise emission. Rail roughness measurement related to rolling noise generation |
DIN EN 15610 E : 2009
|
RAILWAY APPLICATIONS - NOISE EMISSION - RAIL ROUGHNESS MEASUREMENT RELATED TO ROLLING NOISE GENERATION |
BS EN ISO 389-7 : 2005
|
ACOUSTICS - REFERENCE ZERO FOR THE CALIBRATION OF AUDIOMETRIC EQUIPMENT - PART 7: REFERENCE THRESHOLD OF HEARING UNDER FREE-FIELD AND DIFFUSE-FIELD LISTENING CONDITIONS (ISO 389-7:2005) |
ISO 1680-1:1986
|
Acoustics Test code for the measurement of airborne noise emitted by rotating electrical machinery Part 1: Engineering method for free-field conditions over a reflecting plane |
EN 15610:2009
|
Railway applications - Noise emission - Rail roughness measurement related to noise generation |
ISO 16063-21:2003
|
Methods for the calibration of vibration and shock transducers Part 21: Vibration calibration by comparison to a reference transducer |
ISO 10302-2:2011
|
Acoustics — Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices — Part 2: Structure-borne vibration measurements |
IEC 60645-1 REDLINE : 4ED 2017
|
ELECTROACOUSTICS - AUDIOMETRIC EQUIPMENT - PART 1: EQUIPMENT FOR PURE-TONE AND SPEECH AUDIOMETRY |
IEC 60068-2-81:2003
|
Environmental testing - Part 2-81: Tests - Test Ei: Shock - Shock response spectrum synthesis |
ISO 354:2003
|
Acoustics — Measurement of sound absorption in a reverberation room |
EN ISO 3381:2011
|
Railway applications - Acoustics - Measurement of noise inside railbound vehicles (ISO 3381:2005) |
UNE-EN 60645-1:2015
|
Electroacoustics - Audiometric equipment - Part 1: Equipment for pure-tone audiometry |
DIN EN ISO 10846-4:2004-02
|
Acoustics and vibration - Laboratory measurement of the vibro-acoustic transfer properties of resilient elements - Part 4: Dynamic stiffness of elements other than elastic supports for translatory motion (ISO 10846-4:2003); German version EN ISO 10846-4:2003 |
IEC 60645-1:2017 RLV
|
Electroacoustics - Audiometric equipment - Part 1: Equipment for pure-tone and speech audiometry |
ISO 389-9:2009
|
Acoustics Reference zero for the calibration of audiometric equipment Part 9: Preferred test conditions for the determination of reference hearing threshold levels |
ISO 10846-5:2008
|
Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion |
BS EN ISO 5136:2009
|
Acoustics. Determination of sound power radiated into a duct by fans and other air-moving devices. In-duct method |
ISO 10534-1:1996
|
Acoustics Determination of sound absorption coefficient and impedance in impedance tubes Part 1: Method using standing wave ratio |
BS EN 15036-2:2006
|
Heating boilers. Test regulations for airborne noise emissions from heat generators Flue gas noise emissions at the outlet of the heat generator |
ISO 16251-1:2014
|
Acoustics Laboratory measurement of the reduction of transmitted impact noise by floor coverings on a small floor mock-up Part 1: Heavyweight compact floor |
IEC 60952-1:2013
|
Aircraft batteries - Part 1: General test requirements and performance levels |
ISO 3381:2005
|
Railway applications Acoustics Measurement of noise inside railbound vehicles |
ISO 7731:2003
|
Ergonomics Danger signals for public and work areas Auditory danger signals |
ISO 10846-4:2003
|
Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion |
IEC 61252:1993+AMD1:2000+AMD2:2017 CSV
|
Electroacoustics - Specifications for personal sound exposure meters |
UNE-EN ISO 3095:2014
|
Acoustics - Railway applications - Measurement of noise emitted by railbound vehicles (ISO 3095:2013) |
BS EN ISO 3381:2011
|
Railway applications. Acoustics. Measurement of noise inside railbound vehicles |
IEC 61606:1997
|
Audio and audiovisual equipment - Digital audio parts - Basic methods of measurement of audio characteristics |
ISO 8253-3:2012
|
Acoustics Audiometric test methods Part 3: Speech audiometry |
ISO 10534-2:1998
|
Acoustics — Determination of sound absorption coefficient and impedance in impedance tubes — Part 2: Transfer-function method |
EN 60318-6:2008
|
Electroacoustics - Simulators of human head and ear - Part 6: Mechanical coupler for the measurement of bone vibrators |
EN 61252:1995/A2:2017
|
ELECTROACOUSTICS - SPECIFICATIONS FOR PERSONAL SOUND EXPOSURE METERS (IEC 61252:1993/A2:2017) |
EN ISO 8253-2:2009
|
Acoustics - Audiometric test methods - Part 2: Sound field audiometry with pure-tone and narrow-band test signals (ISO 8253-2:2009) |
EN ISO 10846-3 : 2002
|
ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 3: INDIRECT METHOD FOR DETERMINATION OF THE DYNAMIC STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION |
EN ISO 10846-4 : 2003
|
ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 4: DYNAMIC STIFFNESS OF ELEMENTS OTHER THAN RESILIENT SUPPORTS FOR TRANSLATORY MOTION (ISO 10846-4:2003) |
EN ISO 10534-1:2001
|
Acoustics - Determination of sound absorption coefficient and impedance in impedances tubes - Part 1: Method using standing wave ratio (ISO 10534-1:1996) |
EN ISO 10846-5:2009
|
Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion (ISO 10846-5:2008) |
EN ISO 10846-2:2008
|
Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion (ISO 10846-2:2008) |
EN ISO 3095:2013
|
Acoustics - Railway applications - Measurement of noise emitted by railbound vehicles (ISO 3095:2013) |
EN ISO 10534-2:2001
|
Acoustics - Determination of sound absorption coefficient and impedance in impedances tubes - Part 2: Transfer-function method (ISO 10534-2:1998) |
EN ISO 389-9:2009
|
Acoustics - Reference zero for the calibration of audiometric equipment - Part 9: Preferred test conditions for the determination of reference hearing threshold levels (ISO 389-9:2009) |
EN 15892:2011
|
Railway applications - Noise Emission - Measurement of noise inside driver's cabs |
EN 16286-2:2013
|
Railway applications - Gangway systems between vehicles - Part 2: Acoustic measurements |
EN ISO 7731:2008
|
Ergonomics - Danger signals for public and work areas - Auditory danger signals (ISO 7731:2003) |
EN 2719917 : 1991
|
ACOUSTICS - MEASUREMENT AT THE OPERATOR'S POSITION OF AIRBORNE NOISE EMITTED BY BRUSH SAWS |
EN ISO 5136:2009
|
Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method (ISO 5136:2003) |
EN ISO 354:2003
|
Acoustics - Measurement of sound absorption in a reverberation room (ISO 354:2003) |
UNI EN ISO 8253-3 : 2012
|
ACOUSTICS - AUDIOMETRIC TEST METHODS - PART 3: SPEECH AUDIOMETRY |
EN 1454 : 1997
|
PORTABLE, HAND-HELD, INTERNAL COMBUSTION CUTTING-OFF MACHINES - SAFETY |
EN 25136 : 1993
|
ACOUSTICS - DETERMINATION OF SOUND POWER RADIATED INTO A DUCT BY FANS - IN-DUCT METHOD |
EN 15461:2008+A1:2010
|
Railway applications - Noise emission - Characterisation of the dynamic properties of track sections for pass by noise measurements |
IEEE DRAFT C63.19 : 2005
|
METHODS OF MEASUREMENT OF COMPATIBILITY BETWEEN WIRELESS COMMUNICATIONS DEVICES AND HEARING AIDS |
DIN EN 23742:1991-11
|
ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - PRECISION METHODS FOR DISCRETE-FREQUENCY AND NARROW-BAND SOURCES IN REVERBERATION ROOMS |
ISO 17497-2:2012
|
Acoustics — Sound-scattering properties of surfaces — Part 2: Measurement of the directional diffusion coefficient in a free field |
15/30274135 DC : 0
|
BS ISO 18405 - UNDERWATER ACOUSTICS - TERMINOLOGY |
UNE-EN 15892:2012
|
Railway applications - Noise Emission - Measurement of noise inside driver's cabs |
ISO 27327-2:2014
|
Fans Air curtain units Part 2: Laboratory methods of testing for sound power |
DIN EN ISO 16251-1:2014-11
|
ACOUSTICS - LABORATORY MEASUREMENT OF THE REDUCTION OF TRANSMITTED IMPACT NOISE BY FLOOR COVERINGS ON A SMALL FLOOR MOCK-UP - PART 1: HEAVYWEIGHT COMPACT FLOOR (ISO 16251-1:2014) |
DIN EN 23741:1991-11
|
ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - PRECISION METHODS FOR BROAD-BAND SOURCES IN REVERBERATION ROOMS |
EN IEC 60942:2018
|
Electroacoustics - Sound calibrators |
UNI ISO 9613-1 : 2006
|
Acoustics - Sound attenuation in outdoor propagation - Part 1: Calculation of atmospheric absorption |
UNI EN ISO 16251-1 : 2014
|
ACOUSTICS - LABORATORY MEASUREMENT OF THE REDUCTION OF TRANSMITTED IMPACT NOISE BY FLOOR COVERINGS ON A SMALL FLOOR MOCK-UP - PART 1: HEAVYWEIGHT COMPACT FLOOR |
BS ISO 16063-41:2011
|
Methods for the calibration of vibration and shock transducers Calibration of laser vibrometers |
ANSI/ASA S12.15 : 1992(R2016)
|
FOR ACOUSTICS - PORTABLE ELECTRIC POWER TOOLS, STATIONARY AND FIXED ELECTRIC POWER TOOLS, AND GARDENING APPLIANCES - MEASUREMENT OF SOUND EMITTED |
BS EN 16286-2:2013
|
Railway applications. Gangway systems between vehicles Acoustic measurements |
IEC 61669:2015
|
Electroacoustics - Measurement of real-ear acoustical performance characteristics of hearing aids |
ECMA 74 : 14ED 2017
|
MEASUREMENT OF AIRBORNE NOISE EMITTED BY INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS EQUIPMENT |
BS EN ISO 3095:2013
|
Acoustics. Railway applications. Measurement of noise emitted byrailbound vehicles |
IEC 60318-6:2007
|
Electroacoustics - Simulators of human head and ear - Part 6: Mechanical coupler for the measurement on bone vibrators |
ISO 16063-45:2017
|
Methods for the calibration of vibration and shock transducers — Part 45: In-situ calibration of transducers with built in calibration coil |
11/30241418 DC : 0
|
BS EN 16286-2 - RAILWAY APPLICATIONS - GANGWAY SYSTEMS BETWEEN VEHICLES - PART 2: ACOUSTIC MEASUREMENTS |
UNE-EN ISO 7779:2011
|
Acoustics - Measurement of airborne noise emitted by information technology and telecommunications equipment (ISO 7779:2010) |
PD CEN/TR 16891:2016
|
Railway applications. Acoustics. Measurement method for combined roughness, track decay rates and transfer functions |
DIN EN 15461:2011-01
|
Railway applications - Noise emission - Characterisation of the dynamic properties of track sections for pass by noise measurements (includes Amendment A1:2010) |
12/30239340 DC : 0
|
BS ISO 16251-1 - ACOUSTICS - LABORATORY MEASUREMENT OF THE REDUCTION OF TRANSMITTED IMPACT NOISE BY FLOOR COVERINGS ON A SMALL FLOOR MOCK-UP - PART 1: HEAVYWEIGHT FLOOR |
10/30217127 DC : 0
|
BS EN 60645-2 ED 2 - AUDIOMETRIC EQUIPMENT - PART 2: EQUIPMENT FOR SPEECH AUDIOMETRY |
BS ISO 2954:2012
|
Mechanical vibration of rotating and reciprocating machinery. Requirements for instruments for measuring vibration severity |
BS 4196-7:1988
|
Sound power levels of noise sources Survey method for determination of sound power levels of noise sources using a reference sound source |
BS EN 15892:2011
|
Railway applications. Noise emission. Measurement of noise inside driver\'s cabs |
ISO 13474:2009
|
Acoustics Framework for calculating a distribution of sound exposure levels for impulsive sound events for the purposes of environmental noise assessment |
BS ISO 16063-21 : 2003
|
METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 21: VIBRATION CALIBRATION BY COMPARISON TO A REFERENCE TRANSDUCER |
ONORM EN ISO 7779 : 2010
|
ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED BY INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS EQUIPMENT |
15/30299203 DC : 0
|
BS EN 60500 ED 2.0 - UNDERWATER ACOUSTICS - HYDROPHONES - PROPERTIES OF HYDROPHONES IN THE FREQUENCY RANGE 1 HZ TO 500 KHZ |
BS ISO 16063-11:1999
|
Methods for the calibration of vibration and shock transducers Primary vibration calibration by laser interferometry |
ISO 16063-41:2011
|
Methods for the calibration of vibration and shock transducers Part 41: Calibration of laser vibrometers |
BS ISO 16063-31:2009
|
Methods for the calibration of vibration and shock transducers Testing of transverse vibration sensitivity |
I.S. EN 61669:2016
|
ELECTROACOUSTICS - MEASUREMENT OF REAL-EAR ACOUSTICAL PERFORMANCE CHARACTERISTICS OF HEARING AIDS |
01/564696 DC : DRAFT NOV 2001
|
BS ISO 7731 - ERGONOMICS - DANGER SIGNALS FOR PUBLIC AND WORK AREAS - AUDITORY DANGER SIGNALS |
DIN EN ISO 3095:2014-07
|
ACOUSTICS - RAILWAY APPLICATIONS - MEASUREMENT OF NOISE EMITTED BY RAILBOUND VEHICLES (ISO 3095:2013) |
BS 4196-6:1981
|
Sound power levels of noise sources Survey method for determination of sound power levels of noise sources |
CEI EN 60645-2 : 1997
|
AUDIOMETERS - PART 2: EQUIPMENT FOR SPEECH AUDIOMETRY |
NF ISO 7183 : 1989
|
COMPRESSED AIR DRYERS - SPECIFICATIONS AND TESTS |
ISO/TS 13474:2003
|
Acoustics Impulse sound propagation for environmental noise assessment |
ISO 13348:2007
|
Industrial fans — Tolerances, methods of conversion and technical data presentation |
EN ISO 7779:2010
|
Acoustics - Measurement of airborne noise emitted by information technology and telecommunications equipment (ISO 7779:2010) |
I.S. EN 16286-2:2013
|
RAILWAY APPLICATIONS - GANGWAY SYSTEMS BETWEEN VEHICLES - PART 2: ACOUSTIC MEASUREMENTS |
ISO 4834:1997
|
Cinematography — Magnetic sound test films excluding striped release prints — Basic technical characteristics |
ISO 10302:1996
|
Acoustics Method for the measurement of airborne noise emitted by small air-moving devices |
I.S. EN 61096:1993
|
METHODS OF MEASURING THE CHARACTERISTICS OF REPRODUCING EQUIPMENT FOR DIGITAL AUDIO COMPACT DISCS |
UNE-EN 15610:2010
|
Railway applications - Noise emission - Rail roughness measurement related to rolling noise generation |
17/30304301 DC : 0
|
BS EN 15610 - RAILWAY APPLICATIONS - ACOUSTICS - RAIL AND WHEEL ROUGHNESS MEASUREMENT RELATED TO ROLLING NOISE GENERATION |
ANSI/ASA S12.10 PART 1 : 2010
|
ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED BY INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS EQUIPMENT - PART 1: DETERMINATION OF SOUND POWER LEVEL AND EMISSION SOUND PRESSURE LEVEL |
I.S. EN 60645-2:1999
|
AUDIOMETERS - PART 2: EQUIPMENT FOR SPEECH AUDIOMETRY |
ISO 16063-12:2002
|
Methods for the calibration of vibration and shock transducers — Part 12: Primary vibration calibration by the reciprocity method |
ISO 13347-1:2004
|
Industrial fans — Determination of fan sound power levels under standardized laboratory conditions — Part 1: General overview |
I.S. EN ISO 389-7:2005
|
ACOUSTICS - REFERENCE ZERO FOR THE CALIBRATION OF AUDIOMETRIC EQUIPMENT - PART 7: REFERENCE THRESHOLD OF HEARING UNDER FREE-FIELD AND DIFFUSE-FIELD LISTENING CONDITIONS |
ISO/IEC 8613-9:1996
|
Information technology Open Document Architecture (ODA) and interchange format: Audio content architectures |
I.S. EN 60318-6:2008
|
ELECTROACOUSTICS - SIMULATORS OF HUMAN HEAD AND EAR - PART 6: MECHANICAL COUPLER FOR THE MEASUREMENT OF BONE VIBRATORS |
DIN EN ISO 7731:2008-12
|
ERGONOMICS - DANGER SIGNALS FOR PUBLIC AND WORK AREAS - AUDITORY DANGER SIGNALS |
DIN EN ISO 354 E : 2003
|
ACOUSTICS - MEASUREMENT OF SOUND ABSORPTION IN A REVERBERATION ROOM |
DIN EN ISO 10846-2:2008-11
|
ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 2: DIRECT METHOD FOR DETERMINATION OF THE DYNAMIC STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION |
BS EN ISO 10534-1:2001
|
Acoustics. Determination of sound absorption coefficient and impedance in impedances tubes Method using standing wave ratio |
BS EN ISO 10846-3:2002
|
Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion |
BS EN 1454:1997
|
Portable, hand-held, internal combustion cutting-off machines. Safety |
BS EN 25136:1994
|
Acoustics. Determination of sound power radiated into a duct by fans. In-duct method |
ISO 389-7:2005
|
Acoustics Reference zero for the calibration of audiometric equipment Part 7: Reference threshold of hearing under free-field and diffuse-field listening conditions |
EN ISO 8253-3:2012
|
Acoustics - Audiometric test methods - Part 3: Speech audiometry (ISO 8253-3:2012) |
EN 61606 : 1997
|
AUDIO AND AUDIOVISUAL EQUIPMENT - DIGITAL AUDIO PARTS - BASIC METHODS OF MEASUREMENT OF AUDIO CHARACTERISTICS |
EN 60068-2-65:2013
|
Environmental testing - Part 2-65: Tests - Test Fg: Vibration - Acoustically induced method |
UNI EN ISO 3381 : 2011
|
RAILWAY APPLICATIONS - ACOUSTICS - MEASUREMENT OF NOISE INSIDE RAILBOUND VEHICLES |
DIN EN 457:1992-04
|
SAFETY OF MACHINERY - AUDITORY DANGER SIGNALS - GENERAL REQUIREMENTS, DESIGN AND TESTING |
CEN/TR 16891:2016
|
Railway applications - Acoustics - Measurement method for combined roughness, track decay rates and transfer functions |
DIN EN ISO 5136:2009-11
|
Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method (ISO 5136:2003) |
DIN EN 15892:2011-05
|
Railway applications - Noise Emission - Measurement of noise inside driver\'s cabs |
EN 60645-4:1995
|
Audiometers - Part 4: Equipment for extended high-frequency audiometry |
DIN EN ISO 389-7:1998-12
|
ACOUSTICS - REFERENCE ZERO FOR THE CALIBRATION OF AUDIOMETRIC EQUIPMENT - PART 7: REFERENCE THRESHOLD OF HEARING UNDER FREE-FIELD AND DIFFUSE-FIELD LISTENING CONDITIONS |
EN 60645-1:2017
|
Electroacoustics - Audiometric equipment - Part 1: Equipment for pure-tone and speech audiometry |
EN 60952-1:2013
|
AIRCRAFT BATTERIES - PART 1: GENERAL TEST REQUIREMENTS AND PERFORMANCE LEVELS (IEC 60952-1:2013) |
BS 6402(1994) : 1994 AMD 9323
|
ELECTROACOUSTICS - SPECIFICATIONS FOR PERSONAL SOUND EXPOSURE METERS |
BS 4196-3:1991
|
Sound power levels of noise sources Engineering methods for determination of sound power levels for sources in special reverberation test rooms |