ISO 2818:1994

Withdrawn

Withdrawn A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

View superseded by

Plastics — Preparation of test specimens by machining

Available format(s): Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

Withdrawn date: 15-12-2018

Language(s):

Published date: 18-08-1994

Publisher: International Organization for Standardization

Abstract - (Show below) - (Hide below)

Cancels and replaces the second edition (1980). Establishes the general principles and procedures to be followed when machining and notching test specimens from compression-moulded and injection-moulded plastics, extruded sheets, plates and partially finished or wholly finished products.

General Product Information - (Show below) - (Hide below)

Development Note	DRAFT ISO/DIS 2818 is also available for this standard. (12/2015)
Document Type	Standard
ISBN
Pages
Published
Publisher	International Organization for Standardization
Status	Withdrawn
Superseded By	ISO 2818:2018
Supersedes	ISO 2818:1980

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
DIN EN ISO 2818:1997-06	Identical
JIS K 7144:1999	Identical
NS EN ISO 2818 : 1ED 1997	Identical
I.S. EN ISO 2818:1997	Identical
UNI EN ISO 2818 : 1998	Identical
PN EN ISO 2818 : 2001	Identical
NF EN ISO 2818 : 1997	Identical
BS EN ISO 2818 : 1997	Identical
SN EN ISO 2818 : 1997	Identical
EN ISO 2818:1996	Identical
NEN EN ISO 2818 : 1997	Identical
UNE-EN ISO 2818:1997	Identical
NEN ISO 2818 : 1994	Identical
ONORM EN ISO 2818 : 1997	Identical
NBN EN ISO 2818 : 1997	Identical
BS 2782-9.930A(1996) : 1996 AMD 9487	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

DIN EN ISO 22088-5:2009-10	Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 5: Constant tensile deformation method (ISO 22088-5:2006)
NF EN ISO 178 : 2011 AMD 1 2013	PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES
ISO 178:2010	Plastics Determination of flexural properties
BS ISO 15850:2014	Plastics. Determination of tension-tension fatigue crack propagation. Linear elastic fracture mechanics (LEFM) approach
PREN ISO 7792-2 : DRAFT 2011	PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN ISO 877:1997
UNI EN ISO 15015 : 2011	PLASTICS - EXTRUDED SHEETS OF IMPACT-MODIFIED ACRYLONITRILE-STYRENE COPOLYMERS (ABS, AEPDS AND ASA) - REQUIREMENTS AND TEST METHODS
97/713393 DC : DRAFT AUG 1997	PREN 4364 - AEROSPACE STANDARD - CAST (PMMA) ACRYLIC - PROPERTIES
06/30144978 DC : DRAFT JAN 2006	EN ISO 15014 - PLASTICS - EXTRUDED SHEETS OF POLY(VINYLIDENE FLUORIDE) (PVDF) - REQUIREMENTS AND TEST METHODS
10/30211370 DC : DRAFT JUNE 2010	BS ISO 11833-1 - PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: SHEETS OF THICKNESS NOT LESS THAN 1 MM
16/30334902 DC : 0	BS EN ISO 10350-1 - PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 1: MOULDING MATERIALS
97/713395 DC : DRAFT AUG 1997	PREN 4366 - AEROSPACE STANDARD - HEAT AND CRAZING RESISTANT ACRYLIC - CAST, CROSSLINKED AND MULTI-AXIALLY STRETCHED - LOW MOISTURE ABSORPTION - PROPERTIES
DIN ISO 175:1989-04	PLASTICS - DETERMINATION OF THE EFFECTS OF LIQUID CHEMICALS, INCLUDING WATER
BS 2782-5 Method 552A:1981	Methods of testing plastics. Optical and colour properties, weathering Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or artificial light
DIN EN ISO 877-1:2016-09 (Draft)	PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 1: GENERAL GUIDANCE
16/30340793 DC : 0	BS ISO 17281 - PLASTICS - DETERMINATION OF FRACTURE TOUGHNESS (GIC AND KIC) AT MODERATELY HIGH LOADING RATES (1 M/S)
BS ISO 20753 : 2008	PLASTICS - TEST SPECIMENS
11/30192003 DC : 0	BS EN ISO 7792-2 - PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
08/30188330 DC : DRAFT AUG 2008	BS EN ISO 178 - PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES
UNE-EN ISO 19069-2:2016	Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19069-2:2016)
04/30078983 DC : DRAFT OCT 2004	ISO 22088-4 - PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - PART 4: BALL OR PIN IMPRESSION METHOD
I.S. EN ISO 22088-5:2009	PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - PART 5: CONSTANT TENSILE DEFORMATION METHOD
DIN EN ISO 15015:2011-07	Plastics - Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) - Requirements and test methods (ISO 15015:2011)
DIN EN ISO 17855-2:2016-06	PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 17855-2:2016)
BS ISO 15166-1:1998	Adhesives. Methods of preparing bulk specimens Two-part systems
DIN EN 15860 E : 2012	PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS
04/30115317 DC : 0	BS EN ISO 10350-1 - PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 1: MOULDING MATERIALS
BS ISO 1268-4 : 2005	FIBRE-REINFORCED PLASTICS - METHODS OF PRODUCING TEST PLATES - PART 4: MOULDING OF PREPREGS
04/30078976 DC : DRAFT OCT 2004	ISO 22088-3 - PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - PART 3: BENT STRIP METHOD
DIN ISO 306:1990-09	PLASTICS - THERMOPLASTIC MATERIALS - DETERMINATION OF VICAT SOFTENING TEMPERATURE
ONORM EN ISO 11963 : 2013	PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS (ISO 11963:2012)
12/30237820 DC : 0	BS EN ISO 306 - PLASTICS - THERMOPLASTIC MATERIALS - DETERMINATION OF VICAT SOFTENING TEMPERATURE (VST) (ISO/DIS 306:2012)
BS ISO 13586 : 2000	PLASTICS - DETERMINATION OF FRACTURE TOUGHNESS (G[IC] AND K[IC]) - LINEAR ELASTIC FRACTURE MECHANICS (LEFM) APPROACH
UNE-EN ISO 877-1:2011	Plastics - Methods of exposure to solar radiation - Part 1: General guidance (ISO 877-1:2009)
BIS IS 13360-5-4 : 2013	PLASTICS - METHODS OF TESTING - PART 5: MECHANICAL PROPERTIES - SECTION 4: DETERMINATION OF IZOD IMPACT STRENGTH
12/30192217 DC	BS ISO 12856. Plastic railway sleepers (railroad ties)
07/30155372 DC : 0	BS ISO 877-1 - PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 1: GENERAL GUIDANCE
BS 2782-4.430A.D(1983) : 1983	METHODS OF TESTING PLASTICS - CHEMICAL PROPERTIES - DETERMINATION OF WATER AND BOILING WATER ABSORPTION AT 23 DEGREES C. DETERMINATION OF WATER AND BOILING WATER WITH ALLOWANCE OF WATER-SOLUBLE MATTER
PREN 4366 : 200P1	AEROSPACE SERIES - HEAT AND CRAZING RESISTANT CAST ACRYLIC, CROSSLINKED, MULTI-AXIALLY STRETCHED, AND LOW MOISTURE ABSORPTION - PROPERTIES
UNE-EN ISO 17855-2:2016	Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 17855-2:2016)
ISO 4582:2017	Plastics — Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources
PREN 4243 : 200P1	AEROSPACE SERIES - CAST ACRYLIC SHEETS - TECHNICAL SPECIFICATION
PREN 4364 : 200P1	AEROSPACE SERIES - CAST ACRYLIC - PROPERTIES
UNI EN ISO 6721-1 : 2011	PLASTICS - DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES - PART 1: GENERAL PRINCIPLES
ONORM EN ISO 20753 : 2014	PLASTICS - TEST SPECIMENS (ISO 20753:2008)
DIN EN ISO 20753 E : 2014	PLASTICS - TEST SPECIMENS (ISO 20753:2008)
UNE-EN ISO 22007-4:2017	Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method (ISO 22007-4:2017)
UNI EN 15860 : 2010	PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS
NF EN ISO 6721-1 : 2011	PLASTICS - DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES - PART 1: GENERAL PRINCIPLES
BS EN ISO 6721-1:2011	Plastics. Determination of dynamic mechanical properties General principles
ASTM D 5945 : 1996	Test Method for Determination of Temperature of Deflection Under Load for Plastics and Ebonite (Withdrawn 1998)
ONORM EN ISO 6721-1 : 2011	PLASTICS - DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES - PART 1: GENERAL PRINCIPLES
BIS IS 13360-6-18 : 2013	PLASTICS - METHODS OF TESTING - PART 6: THERMAL PROPERTIES - SECTION 18: DETERMINATION OF TEMPERATURE OF DEFLECTION UNDER LOAD - HIGH-STRENGTH THERMOSETTING LAMINATES AND LONG-FIBRE-REINFORCED PLASTICS
EN ISO 178:2010/A1:2013	PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010/AMD 1:2013)
ASTM D 5935 : 1996	Practice for Acquisition and Presentation of Comparable Single-Point Data (Withdrawn 1998)
ISO 16241:2005	Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe and fitting products (PENT)
DIN EN ISO 20753:2014-07	PLASTICS - TEST SPECIMENS (ISO 20753:2008)
ASTM D 5941 : 1996	Standard Test Method for Determination of Izod Impact Strength (Withdrawn 1998)
ASTM D 7436 : 2017 : REDLINE	Standard Classification System for Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and Methodology
I.S. EN ISO 180:2001	PLASTICS - DETERMINATION OF IZOD IMPACT STRENGTH (ISO 180:2000)
I.S. EN ISO 11963:2012	PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS (ISO 11963:2012)
I.S. EN ISO 11833-1:2012	PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: SHEETS OF THICKNESS NOT LESS THAN 1 MM (ISO 11833-1:2012)
EN ISO 527-2:2012	Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012)
DIN EN ISO 11403-1 E : 2003	PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 1: MECHANICAL PROPERTIES (ISO 11403-1:2014)
DIN EN ISO 75-2:2013-08	PLASTICS - DETERMINATION OF TEMPERATURE OF DEFLECTION UNDER LOAD - PART 2: PLASTICS AND EBONITE (ISO 75-2:2013)
DIN EN ISO 4613-2:2004-12	PLASTICS - ETHYLENE/VINYL ACETATE (E/VAC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 3673-2 E : 2012	PLASTICS - EPOXY RESINS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES OF CROSSLINKED EPOXY RESINS (ISO 3673-2:2012)
DIN EN 14598-3:2005-07	Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements
DIN EN 13421:2006-05	Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites
DIN EN 14598-2:2005-07	Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 2: Methods of test and general requirements
DIN EN ISO 11403-3 E : 2002	PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 3: ENVIRONMENTAL INFLUENCES ON PROPERTIES (ISO 11403-3:2014)
BS EN ISO 23667:2007	Packaging. Transport packaging for dangerous goods. Rigid plastics and plastics composite IBCs. Compatibility testing
BS EN ISO 527-5:2009	Plastics. Determination of tensile properties Test conditions for unidirectional fibre-reinforced plastic composites
ISO 18489:2015	Polyethylene (PE) materials for piping systems — Determination of resistance to slow crack growth under cyclic loading — Cracked Round Bar test method
BS EN ISO 11833-2:2006	Plastics. Unplasticized poly(vinyl chloride) sheets. Types, dimensions and characteristics Sheets of thickness less than 1 mm
BS EN ISO 1622-2:1999	Plastics. Polystrene (PS) moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN ISO 11542-2 : 1999	PLASTICS - ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE (PE-UHMW) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
UNE-EN ISO 175:2011	Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:2010)
UNE-EN ISO 6259-1:2015	Thermoplastics pipes - Determination of tensile properties - Part 1: General test method (ISO 6259-1:2015)
BS EN ISO 6252:1998	Plastics. Determination of environmental stress cracking (ESC). Constant-tensile-stress method
ISO 75-3:2004	Plastics — Determination of temperature of deflection under load — Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
BS EN ISO 604:2003	Plastics. Determination of compressive properties
BS EN ISO 3167:2014	Plastics. Multipurpose test specimens
ISO 15015:2011	Plastics Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) Requirements and test methods
BS EN ISO 15252-2:2000	Plastics. Epoxy powder moulding compounds (EP-PMCs) Preparation of test specimens and determination of properties
BS EN ISO 11403-3:2014	Plastics. Acquisition and presentation of comparable multipoint data Environmental influences on properties
BS EN ISO 2580-2:2003	Plastics. Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials Preparation of test specimens and determination of properties
I.S. EN ISO 62:2008	PLASTICS - DETERMINATION OF WATER ABSORPTION
DIN EN ISO 1872-2:2000-12	PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN ISO 7823-1:2003	PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: CAST SHEETS
I.S. EN ISO 2580-2:2004	PLASTICS - ACRYLONITRILE/BUTADIENE/STYRENE (ABS) MOULDING AND EXTRUSION MATERIALS - PART 2 - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN ISO 11403-2:2012	PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 2: THERMAL AND PROCESSING PROPERTIES (ISO 11403-2:2012)
EN ISO 16871:2003	Plastics piping and ducting systems - Plastics pipes and fittings - Method for exposure to direct (natural) weathering (ISO 16871:2003)
DIN EN ISO 178:2013-09	PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010 + AMD.1:2013)
EN ISO 23667:2007	Packaging - Transport packaging for dangerous goods - Rigid plastics and plastics composite IBCs - Compatibility testing (ISO 23667:2007)
DIN EN ISO 175:2011-03	Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:2010)
DIN EN ISO 306:2014-03	Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2013)
DIN EN ISO 4611:2011-04	Plastics - Determination of the effects of exposure to damp heat, water spray and salt mist (ISO 4611:2010)
DIN EN ISO 3672-2:2002-07	PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN 1056 : 1996	METHODS OF TESTING PLASTICS - THERMOPLASTICS PIPES, FITTINGS AND VALVES - PLASTICS PIPING AND DUCTING SYSTEMS - PLASTICS PIPES AND FITTINGS - METHOD FOR EXPOSURE TO DIRECT (NATURAL) WEATHERING
EN 12814-1:1999/AC:2003	TESTING OF WELDED JOINTS OF THERMOPLASTICS SEMI-FINISHED PRODUCTS - PART 1: BEND TEST
EN 1013-3:1997	Light transmitting profiled plastic sheeting for single skin roofing - Part 3: Specific requirements and test methods for sheets of polyvinyl chloride (PVC)
ONORM EN ISO 179-1 : 2010	PLASTICS - DETERMINATION OF CHARPY IMPACT PROPERTIES - PART 1: NON-INSTRUMENTED IMPACT TEST
ONORM EN ISO 306 : 2014	PLASTICS - THERMOPLASTICS MATERIALS - DETERMINATION OF VICAT SOFTENING TEMPERATURE (VST) (ISO 306:2013)
NF EN ISO 179-1 : 2010	PLASTICS - DETERMINATION OF CHARPY IMPACT PROPERTIES - PART 1: NON-INSTRUMENTED IMPACT TEST
ONORM EN ISO 11542-2 : 2009	PLASTICS - ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE (PE-UHMW) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
14/30304058 DC : 0	BS EN ISO 17855-2 - PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN ISO 4600:1998	PLASTICS - DETERMINATION OF ENVIRONMENTAL STRESS CRACKING (ESC) - BALL OR PIN IMPRESSION METHOD
16/30340787 DC : 0	BS ISO 13586 - PLASTICS - DETERMINATION OF FRACTURE TOUGHNESS (GIC AND KIC) - LINEAR ELASTIC FRACTURE MECHANICS (LEFM) APPROACH
97/713394 DC : DRAFT AUG 1997	PREN 4365 - AEROSPACE STANDARD - HEAT AND CRAZING RESISTANT ACRYLIC - CAST AND CROSS LINKED - LOW MOISTURE ABSORPTION - PROPERTIES
07/30165210 DC : 0	BS EN ISO 10350-2 - PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 2: LONG-FIBRE-REINFORCED PLASTICS
BS 771-1:1980	Phenolic moulding materials Specification for physical properties (excluding type L2 material)
DIN EN ISO 178 E : 2013	PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010 + AMD.1:2013)
07/30175034 DC : DRAFT DEC 2007	BS ISO 18352 - CARBON-FIBRE-REINFORCED PLASTICS - DETERMINATION OF COMPRESSION-AFTER-IMPACT PROPERTIES AT A SPECIFIED IMPACT ENERGY LEVEL
17/30342172 DC : 0	BS ISO 20975-2 - CARBON-FIBRE-REINFORCED PLASTICS - METHODS FOR MEASUREMENT OF THROUGH-THICKNESS LAMINATE PROPERTIES - PART 2: CONSIDERING SIZE EFFECTS BY FLEXURAL TEST
BS 2782-5.550B(1996) : 1996 AMD 9494
17/30349217 DC : 0	BS EN ISO 21970-2 - PLASTICS - POLYKETONE (PK) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
05/30132990 DC : DRAFT APR 2005	ISO 20753 - PLASTICS - TEST SPECIMENS
BS EN ISO 22007-4:2017	Plastics. Determination of thermal conductivity and thermal diffusivity Laser flash method
BS ISO 15166-2:2000	Adhesives. Methods of preparing bulk specimens Elevated-temperature-curing one-part systems
11/30196210 DC : 0	BS ISO 12815 - FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF PLAIN-PIN BEARING STRENGTH
BS ISO 11833-2 : 1998 AMD 16032	PLASTICS - UNPLASTICIZED POLY (VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - SHEETS OF THICKNESS LESS THAN 1 MM
PREN ISO 4611 : DRAFT 2010	PLASTICS - DETERMINATION OF THE EFFECTS OF EXPOSURE TO DAMP HEAT, WATER SPRAY AND SALT MIST
14/30253068 DC : 0	BS EN ISO 4892-1 - PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE
05/30102804 DC : DRAFT MAY 2005	ISO 18872 - PLASTICS - DETERMINATION OF TENSILE PROPERTIES AT HIGH STRAIN RATES
UNI EN ISO 877-1 : 2011	PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 1: GENERAL GUIDANCE
12/30237823 DC : 0	BS EN ISO 75-2 - PLASTICS - DETERMINATION OF TEMPERATURE OF DEFLECTION UNDER LOAD - PART 2: PLASTICS AND EBONITE
BS ISO 17281:2002	Plastics. Determination of fracture toughness (G_ic and K_ic) at moderately high loading rates (1 m/s)
PREN ISO 11403-1 : DRAFT 2012	PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 1: MECHANICAL PROPERTIES (ISO/DIS 11403-1:2012)
08/30192288 DC : 0	BS EN ISO 179-1 - PLASTICS - DETERMINATION OF CHARPY IMPACT PROPERTIES - PART 1: NON-INSTRUMENTED IMPACT TEST
11/30196213 DC : 0	BS ISO 12817 - FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF OPENHOLE COMPRESSION STRENGTH
DIN EN ISO 19069-2:2016-07	PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 19069-2:2016)
I.S. EN ISO 13274:2013	PACKAGING - TRANSPORT PACKAGING FOR DANGEROUS GOODS - PLASTICS COMPATIBILITY TESTING FOR PACKAGING AND IBCS (ISO 13274:2013)
97/713392 DC : DRAFT AUG 1997	PREN 4243 - AEROSPACE SERIES - ACRYLIC (PMMA) SHEETS - TECHNICAL SPECIFICATION
BS ISO 2897-2 : 1994 AMD 10661	PLASTICS - IMPACT-RESISTANT POLYSTYRENE (PS-I) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS 2782-1 Method 121A and 121B:1991	Methods of testing plastics. Thermal properties Determination of temperature of deflection of plastics under a bending stress
BS ISO 7391-2 : 1996 AMD 10746	PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
04/30081681 DC : DRAFT OCT 2004	ISO 22088-6 - PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - PART 6: SLOW STRAIN RATE METHOD
BS ISO 4894-2 : AMD 10662	PLASTICS - STYRENE/ACRYLONITRILE (SAN) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
04/30078973 DC : DRAFT OCT 2004	ISO 22088-2 - PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - PART 2: CONSTANT TENSILE STRESS METHOD
BS ISO 14910-2 : 1997 AMD 16024	PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
PREN 4365 : 200P1	AEROSPACE SERIES - HEAT AND CRAZING RESISTANT CAST ACRYLIC, CROSSLINKED, AND LOW MOISTURE ABSORPTION - PROPERTIES
DIN EN ISO 17855-2 E : 2016	PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 17855-2:2016)
EN ISO 11403-1:2014	Plastics - Acquisition and presentation of comparable multipoint data - Part 1: Mechanical properties (ISO 11403-1:2014)
EN ISO 11403-3:2014	Plastics - Acquisition and presentation of comparable multipoint data - Part 3: Environmental influences on properties (ISO 11403-3:2014)
PREN 15860 : DRAFT 2016	PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS
ISO 12856-1:2014	Plastics Plastic railway sleepers for railway applications (railroad ties) Part 1: Material characteristics
I.S. EN ISO 178:2010	PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010)
I.S. EN ISO 7391-2:2006	PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN ISO 22007-4:2017	PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 4: LASER FLASH METHOD (ISO 22007-4:2017)
I.S. EN ISO 20753:2014	PLASTICS - TEST SPECIMENS (ISO 20753:2008)
ISO 2557-1:1989	Plastics Amorphous thermoplastics Preparation of test specimens with a specified maximum reversion Part 1: Bars
UNE-ISO 1268-11:2012	Fibre-reinforced plastics. Methods of producing test plates. Part 11: Injection moulding of BMC and other long-fibre moulding compounds. Small plates
ONORM EN ISO 7391-2 : 2006	PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
UNI EN ISO 11833-1 : 2012	PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: SHEETS OF THICKNESS NOT LESS THAN 1 MM
ISO 18872:2007	Plastics Determination of tensile properties at high strain rates
PREN ISO 306 : DRAFT 2012	PLASTICS - THERMOPLASTIC MATERIALS - DETERMINATION OF VICAT SOFTENING TEMPERATURE (VST)(ISO/DIS 306:2012)
EN ISO 6721-1:2011	Plastics - Determination of dynamic mechanical properties - Part 1: General principles (ISO 6721-1:2011)
ISO 7823-2:2003	Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 2: Extruded sheets
UNE-EN ISO 25137-2:2017	Plastics - Sulfone polymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 25137-2:2009)
ASTM D 5857 : 2017 : REDLINE	Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology
ISO 1268-11:2005	Fibre-reinforced plastics — Methods of producing test plates — Part 11: Injection moulding of BMC and other long-fibre moulding compounds — Small plates
DIN EN ISO 22088-2:2006-11	Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 2: Constant tensile load method (ISO 22088-2:2006)
DIN EN ISO 8986-2 E : 2010	PLASTICS - POLYBUTENE-1 (PB-1) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 10350-2:2011-06	PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 2: LONG-FIBRE-REINFORCED PLASTICS
DIN EN ISO 22088-3:2006-11	Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 3: Bent strip method (ISO 22088-3:2006)
DIN EN ISO 75-3:2004-09	Plastics - Determination of temperature of deflection under load - Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics (ISO 75-3:2004)
DIN EN ISO 23667:2007-10	PACKAGING - TRANSPORT PACKAGING FOR DANGEROUS GOODS - RIGID PLASTICS AND PLASTICS COMPOSITE IBCS - COMPATIBILITY TESTING
DIN EN ISO 22088-1:2006-11	Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 1: General guidance (ISO 22088-1:2006)
DIN EN ISO 62:2008-05	PLASTICS - DETERMINATION OF WATER ABSORPTION
DIN EN ISO 295:2004-05	Plastics - Compression moulding of test specimens of thermosetting materials (ISO 295:2004)
DIN EN ISO 14530-2:2000-08	Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14530-2:1999); German version EN ISO 14530-2:1999
BS EN ISO 180 : 2001	PLASTICS - DETERMINATION OF IZOD IMPACT STRENGTH
BS EN ISO 4894-2:1999	Plastics. Styrene/acrylonitrile (SAN) copolymer moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN ISO 4613-2:1995	Plastics. Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN ISO 15526-2:2004	Plastics. Polyketone (PK) moulding and extrusion materials Preparation of test specimens and determination of properties
DIN EN ISO 2580-2:2004-05	PLASTICS - ACRYLONITRILE-BUTADIENE-STYRENE (ABS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 4589-2:2016-03 (Draft)	PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 2: AMBIENT-TEMPERATURE TEST (ISO 4589-2:2017)
ISO 7823-3:2007	Plastics Poly(methyl methacrylate) sheets Types, dimensions and characteristics Part 3: Continuous cast sheets
UNE-EN ISO 11403-1:2014	Plastics - Acquisition and presentation of comparable multipoint data - Part 1: Mechanical properties (ISO 11403-1:2014)
BS EN ISO 14528-2:2000	Plastics. Melamine-formaldehyde powder moulding compounds (MF-PMCs) Preparation of test specimens and determination of properties
BS EN ISO 7823-3:2007	Plastics. Poly(methacrylate) sheets. Types, dimensions and characteristics Continuous cast sheets
ISO 527-5:2009	Plastics Determination of tensile properties Part 5: Test conditions for unidirectional fibre-reinforced plastic composites
DIN EN ISO 6603-1:2000-10	PLASTICS - DETERMINATION OF PUNCTURE IMPACT BEHAVIOUR OF RIGID PLASTICS - PART 1: NON-INSTRUMENTED IMPACT TESTING
ISO 19069-2:2016	Plastics — Polypropylene (PP) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
BS EN ISO 1872-2:2007	Plastics. Polyethylene (PE) moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN 14598-2:2005	Reinforced thermosetting moulding compounds. Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC) Methods of test and general requirements
BS EN ISO 14125 : 1998	FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF FLEXURAL PROPERTIES
BS EN ISO 14129:1998	Fibre-reinforced plastic composites. Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength by the ± 45° tension test method
ISO 15310:1999	Fibre-reinforced plastic composites Determination of the in-plane shear modulus by the plate twist method
DIN EN ISO 6259-1:2002-02	THERMOPLASTICS PIPES - DETERMINATION OF TENSILE PROPERTIES - PART 1: GENERAL TEST METHOD
I.S. EN ISO 15526-2:2004	PLASTICS - POLYKETONE (PK) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 7391-2:2006-06	PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 11833-1:2012-11	PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: SHEETS OF THICKNESS NOT LESS THAN 1 MM (ISO 11833-1:2012)
I.S. EN ISO 3167:2014	PLASTICS - MULTIPURPOSE TEST SPECIMENS (ISO 3167:2014)
I.S. EN ISO 11403-1:2014	PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 1: MECHANICAL PROPERTIES (ISO 11403-1:2014)
I.S. EN ISO 75-3:2004	PLASTICS - DETERMINATION OF TEMPERATURE OF DEFLECTION UNDER LOAD - PART 3: HIGH-STRENGTH THERMOSETTING LAMINATES AND LONG-FIBRE-REINFORCED PLASTICS
I.S. EN ISO 4611:2010	PLASTICS - DETERMINATION OF THE EFFECTS OF EXPOSURE TO DAMP HEAT, WATER SPRAY AND SALT MIST
I.S. EN ISO 527-2:2012	PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 2: TEST CONDITIONS FOR MOULDING AND EXTRUSION PLASTICS (ISO 527-2:2012)
NF EN ISO 11542-2 : 1999	PLASTICS - ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE (PE-UHMW) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN ISO 15013:2007	PLASTICS - EXTRUDED SHEETS OF POLYPROPYLENE (PP) - REQUIREMENTS AND TEST METHODS
I.S. EN ISO 14663-2:2006	PLASTICS - ETHYLENE/VINYL ALCOHOL (EVOH) COPOLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN ISO 179-1:2010	PLASTICS - DETERMINATION OF CHARPY IMPACT PROPERTIES - PART 1: NON-INSTRUMENTED IMPACT TEST
EN ISO 11963:2012	Plastics - Polycarbonate sheets - Types, dimensions and characteristics (ISO 11963:2012)
I.S. EN ISO 2898-2:2008	PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN ISO 4589-2:2017	PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 2: AMBIENT-TEMPERATURE TEST (ISO 4589-2:2017)
I.S. EN ISO 527-5:2009	PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 5: TEST CONDITIONS FOR UNIDIRECTIONAL FIBRE-REINFORCED PLASTIC COMPOSITES
I.S. EN ISO 4894-2:1999	PLASTICS - STYRENE/ACRYLONITRILE (SAN) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 11833-2:2006-06	Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 2: Sheets of thickness less than 1 mm (ISO 11833-2:1998)
I.S. EN ISO 8256:2004	PLASTICS - DETERMINATION OF TENSILE-IMPACT STRENGTH
I.S. EN ISO 4892-1:2016	PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 4892-1:2016)
I.S. EN ISO 75-2:2013	PLASTICS - DETERMINATION OF TEMPERATURE OF DEFLECTION UNDER LOAD - PART 2: PLASTICS AND EBONITE (ISO 75-2:2013)
I.S. EN ISO 11403-3:2014	PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 3: ENVIRONMENTAL INFLUENCES ON PROPERTIES (ISO 11403-3:2014)
I.S. EN ISO 306:2013	PLASTICS - THERMOPLASTIC MATERIALS - DETERMINATION OF VICAT SOFTENING TEMPERATURE (VST) (ISO 306:2013)
I.S. EN ISO 3673-2:2012	PLASTICS - EPOXY RESINS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES OF CROSSLINKED EPOXY RESINS (ISO 3673-2:2012)
I.S. EN ISO 11542-2:1999	PLASTICS - ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE (PE-UHMW) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 11963:2013-03	PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS (ISO 11963:2012)
I.S. EN ISO 6259-1:2015	THERMOPLASTICS PIPES - DETERMINATION OF TENSILE PROPERTIES - PART 1: GENERAL TEST METHOD (ISO 6259-1:2015)
DIN EN ISO 1873-2:2000-12	PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN ISO 604:2003	PLASTICS - DETERMINATION OF COMPRESSIVE PROPERTIES
DIN EN ISO 877-1:2011-03	Plastics - Methods of exposure to solar radiation - Part 1: General guidance (ISO 877-1:2009)
DIN EN ISO 15526-2:2004-10	PLASTICS - POLYKETONE (PK) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN ISO 12017:1997	PLASTICS - POLY(METHYL METHACRYLATE) DOUBLE- AND TRIPLE-SKIN SHEETS - TEST METHODS
DIN ISO 7148-2:2001-03	PLAIN BEARINGS - TESTING OF THE TRIBOLOGICAL BEHAVIOUR OF BEARING MATERIALS - PART 2: TESTING OF POLYMER-BASED PLAIN BEARING MATERIALS (ISO 7148-2:2012)
EN ISO 11542-2:1998/AC:2008	PLASTICS - ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE (PE-UHMW) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN ISO 175:2010	PLASTICS - METHODS OF TEST FOR THE DETERMINATION OF THE EFFECTS OF IMMERSION IN LIQUID CHEMICALS
I.S. EN ISO 10366-2:2004	PLASTICS - METHYL METHACRYLATE-ACRYLONITRILE-BUTADIENE-STYRENE (MABS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN ISO 7823-3:2007	PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 3: CONTINUOUS CAST SHEETS
BS 771:1992	Specification for phenolic moulding materials
BS 2782-5:Method 552A:1999	Methods of testing plastics. Optical and colour properties, weathering Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources
BS 3412:1992	Methods of specifying general purpose polyethylene materials for moulding and extrusion
BS 2782-5.540D(1999) : 1999 AMD 13148	METHODS OF TESTING PLASTICS - OPTICAL AND COLOUR PROPERTIES, WEATHERING - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - GENERAL GUIDANCE
BS 1322:1992	Specification for aminoplastic moulding materials
BS 2782-8.830A(1999) : 1999 AMD 13097	METHODS OF TESTING PLASTICS - OTHER PROPERTIES - METHODS OF TEST FOR THE DETERMINATION OF THE EFFECTS OF IMMERSION IN LIQUID CHEMICALS
ONORM EN ISO 11403-2 : 2012	PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 2: THERMAL AND PROCESSING PROPERTIES (ISO 11403-2:2012)
02/121542 DC : DRAFT MAR 2002	ISO/DIS 11403-2 - PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 2: THERMAL AND PROCESSING PROPERTIES
DIN EN ISO 22007-4:2016-10 (Draft)	PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 4: LASER FLASH METHOD (ISO 22007-4:2017)
BS EN ISO 25137-2:2017	Plastics. Sulfone polymer moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN ISO 178 : 2010	PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES
I.S. EN ISO 2897-2:2004	PLASTICS - IMPACT-RESISTANT POLYSTYRENE (PS-I) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN ISO 16871:2003	PLASTICS PIPING AND DUCTING SYSTEMS - PLASTICS PIPES AND FITTINGS - METHOD FOR EXPOSURE TO DIRECT (NATURAL) WEATHERING
11/30211349 DC : 0	BS ISO 13636 - PLASTICS - FILM AND SHEETING - NON-ORIENTED POLY(ETHYLENE TEREPHTHALATE) (PET) SHEETS
14/30304062 DC : 0	BS EN ISO 19069-2 - PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
10/30206257 DC : 0	BS EN ISO 4611 - PLASTICS - DETERMINATION OF THE EFFECTS OF EXPOSURE TO DAMP HEAT, WATER SPRAY AND SALT MIST
I.S. EN ISO 22088-2:2007	PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - PART 2: CONSTANT TENSILE LOAD METHOD
I.S. EN ISO 22088-4:2007	PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - PART 4: BALL OR PIN IMPRESSION METHOD
I.S. EN ISO 16101:2004	PACKAGING - TRANSPORT PACKAGING FOR DANGEROUS GOODS - PLASTICS COMPATIBILITY TESTING
I.S. EN ISO 22088-3:2007	PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - PART 3: BENT STRIP METHOD
11/30242905 DC : 0	BS EN ISO 3673-2 - PLASTICS - EPOXY RESINS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 306 E : 2014	PLASTICS - THERMOPLASTIC MATERIALS - DETERMINATION OF VICAT SOFTENING TEMPERATURE (VST) (ISO 306:2013)
DIN 7708-8:1992-02	PLASTICS - POURABLE THERMOSETTING MOULDING MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN ISO 7148-2:2014-07	PLAIN BEARINGS - TESTING OF THE TRIBOLOGICAL BEHAVIOUR OF BEARING MATERIALS - PART 2: TESTING OF POLYMER-BASED PLAIN BEARING MATERIALS (ISO 7148-2:2012)
17/30368428 DC : 0	BS ISO 15314 - PLASTICS - METHODS FOR MARINE EXPOSURE
11/30237918 DC : 0	BS EN ISO 13274 - PACKAGING - TRANSPORT PACKAGING FOR DANGEROUS GOODS - PLASTICS COMPATIBILITY TESTING FOR PACKAGING AND IBCS
BS EN ISO 17855-2:2016	Plastics. Polyethylene (PE) moulding and extrusion materials Preparation of test specimens and determination of properties
DIN EN ISO 13274:2014-06	PACKAGING - TRANSPORT PACKAGING FOR DANGEROUS GOODS - PLASTICS COMPATIBILITY TESTING FOR PACKAGING AND IBCS (ISO 13274:2013 + COR. 1:2014)
BS ISO 11403-2 : 95 AMD 10691	PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - THERMAL AND PROCESSING PROPERTIES
UNI EN ISO 22088-5 : 2009	PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - PART 5: CONSTANT TENSILE DEFORMATION METHOD
BS ISO 15314:2004	Plastics. Methods for marine exposure
BS EN ISO 15015:2011	Plastics. Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA). Requirements and test methods
08/30170332 DC : DRAFT JAN 2008	BS EN ISO 8986-2 - PLASTICS - POLYBUTENE-1 (PB-1) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS EN ISO 13274:2013	Packaging. Transport packaging for dangerous goods. Plastics compatibility testing for packaging and IBCs
BS 2782-11.1107A(1996) : 1996	PLASTICS PIPING AND DUCTING SYSTEMS - PLASTICS PIPES AND FITTINGS - METHOD FOR EXPOSURE TO DIRECT (NATURAL) WEATHERING
BS 2782-1.121D(1994) : 1994 AMD 8645	METHODS OF TESTING PLASTICS - THERMAL PROPERTIES - DETERMINATION OF TEMPERATURE OF DEFLECTION UNDER LOAD AT HIGH-STRENGTH THERMOSETTING LAMINATES AND LONG-FIBRE-REINFORCED PLASTICS
11/30211730 DC : 0	BS ISO 9352 - PLASTICS - DETERMINATION OF RESISTANCE TO WEAR BY ABRASIVE WHEELS
BS 2782-3 Method 359:1984	Methods of testing plastics. Mechanical properties Determination of Charpy impact strength of rigid materials (Charpy impact flexural test)
BS ISO 4589-2 : 1996 AMD 10627	PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - AMBIENT-TEMPERATURE TEST
BS 2782-1 Method 141:1986	Methods of testing plastics. Thermal properties Determination of flammability by oxygen index
ISO 13636:2012	Plastics — Film and sheeting — Non-oriented poly(ethylene terephthalate) (PET) sheets
BS ISO 1268-11:2005	Fibre-reinforced plastics. Methods of producing test plates Injection moulding of BMC and other long-fibre moulding compounds. Small plates
BS 2782-3.354A&B(1991) : 1991 AMD 8635	METHODS OF TESTING PLASTICS - MECHANICAL PROPERTIES - DETERMINATION OF TENSILE-IMPACT STRENGTH
BS ISO 15310 : 1999 AMD 15944	REINFORCED PLASTICS - DETERMINATION OF THE IN-PLANE SHEAR MODULUS BY THE PLATE TWIST METHOD
BS ISO 18872:2007	Plastics. Determination of tensile properties at high strain rates
BS ISO 3672-2 : 2000 AMD 13326	PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS ISO 2580-2 : 94 AMD 10660	PLASTICS - ACRYLONITRILE/BUTADIENE/STYRENE (ABS) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS ISO 1163-2 : 1995 AMD 10744	PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) MOULDING AND EXTRUSION MATERIALS
BS ISO 2898-2 : 1997 AMD 10727	PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
03/102086 DC : DRAFT JAN 2003	BS ISO 16241 - NOTCH TENSILE TEST TO MEASURE THE RESISTANCE TO SLOW CRACK GROWTH OF POLYETHYLENE MATERIALS FOR PIPES AND FITTING PRODUCTS (PENT)
02/120706 DC : DRAFT FEB 2002	BS EN ISO 8256 - PLASTICS - DETERMINATION OF TENSILE-IMPACT STRENGTH
BS ISO 1622-2 : 1995 AMD 10649	PLASTICS - POLYSTYRENE (PS) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
NF EN ISO 22088-5 : 2009	PLASTICS - DETERMINATION OF RESISTANCE TO STRESS CRACKING (ESC) - PART 5: CONSTANT TENSILE DEFORMATION METHOD
I.S. EN ISO 877-1:2010	PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 1: GENERAL GUIDANCE
ISO 20753:2008	Plastics Test specimens
BIS IS 13360-2-5 : 2013	PLASTICS - METHODS OF TESTING - PART 2: SAMPLING AND PREPARATION OF TEST SPECIMENS - SECTION 5: MULTIPURPOSE TEST SPECIMENS
I.S. EN ISO 17855-2:2016	PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 17855-2:2016)
BS 2782-5 Method 550A:1981	Methods of testing plastics. Optical and colour properties, weathering Methods of exposure to natural weathering
I.S. EN ISO 25137-2:2017	PLASTICS - SULFONE POLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 25137-2:2009)
ISO 12815:2013	Fibre-reinforced plastic composites — Determination of plain-pin bearing strength
UNI EN ISO 178 : 2013	PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES
ISO 7148-2:2012	Plain bearings — Testing of the tribological behaviour of bearing materials — Part 2: Testing of polymer-based bearing materials
BS EN ISO 20753:2014	Plastics. Test specimens
ASTM D 5936 : 1996	Specification for Multipurpose Test Specimens (Withdrawn 1998)
ISO 11833-1:2012	Plastics Unplasticized poly(vinyl chloride) sheets Types, dimensions and characteristics Part 1: Sheets of thickness not less than 1 mm
EN ISO 7391-2:2006	Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7391-2:2006)
I.S. EN ISO 8986-2:2009	PLASTICS - POLYBUTENE-1 (PB-1) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
UNI EN ISO 11403-1 : 2014	PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 1: MECHANICAL PROPERTIES
ISO 15166-1:1998	Adhesives Methods of preparing bulk specimens Part 1: Two-part systems
UNE-EN 15860:2011	Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
EN ISO 14125:1998/A1:2011	FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF FLEXURAL PROPERTIES
ISO 15166-2:2000	Adhesives Methods of preparing bulk specimens Part 2: Elevated-temperature-curing one-part systems
DIN EN ISO 22088-4:2006-11	Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 4: Ball or pin impression method (ISO 22088-4:2006)
DIN EN ISO 3672-2 E : 2002	PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 4589-2 E : 2017	PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 2: AMBIENT-TEMPERATURE TEST (ISO 4589-2:2017)
DIN EN ISO 527-4:1997-07	Determination of tensile properties of plastics - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites (ISO 527-4:1997)
DIN EN ISO 16101:2004-12	PACKAGING - TRANSPORT PACKAGING FOR DANGEROUS GOODS - PLASTICS COMPATIBILITY TESTING
DIN EN ISO 295 E : 2004	PLASTICS - COMPRESSION MOULDING TEST SPECIMENS OF THERMOSETTING MATERIALS
DIN EN ISO 8256:2005-05	Plastics - Determination of tensile-impact strength (ISO 8256:2004); German version EN ISO 8256:2004
DIN EN ISO 6402-2:2004-05	PLASTICS - ACRYLONITRILE-STYRENE-ACRYLATE (ASA), ACRYLONITRILE-(ETHYLENE-PROPYLENE-DIENE)-STYRENE (AEPDS) AND ACRYLONITRILE-(CHLORINATED POLYETHYLENE)-STYRENE (ACS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 2897-2:2004-05	PLASTICS - IMPACT-RESISTANT POLYSTYRENE (PS-I) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 11403-3:2014-09	Plastics - Acquisition and presentation of comparable multipoint data - Part 3: Environmental influences on properties (ISO 11403-3:2014)
DIN EN ISO 11403-1:2014-09	Plastics - Acquisition and presentation of comparable multipoint data - Part 1: Mechanical properties (ISO 11403-1:2014)
UNE-EN ISO 306:2015	Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2013)
ISO 13274:2013	Packaging — Transport packaging for dangerous goods — Plastics compatibility testing for packaging and IBCs
BS EN ISO 6603-1:2000	Plastics. Determination of multi-axial impact behaviour of rigid plastics Non-instrumented impact testing
BS EN ISO 3673-2:2012	Plastics. Epoxy resins Preparation of test specimens and determination of properties of crosslinked epoxy resins
DIN EN ISO 180:2013-08	PLASTICS - DETERMINATION OF IZOD IMPACT STRENGTH (ISO 180:2000 + AMD.1:2006 + AMD.2:2013)
BS EN ISO 8256:2004	Plastics. Determination of tensile-impact strength
ISO 17855-2:2016	Plastics Polyethylene (PE) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
ISO 527-4:1997	Plastics Determination of tensile properties Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
ISO 14125:1998	Fibre-reinforced plastic composites Determination of flexural properties
BS EN 13421:2006	Plastics. Thermoset moulding compounds. Composites and reinforcement fibres. Preparation of specimens for determining the anisotropy of the properties of compression moulding composites
ISO 1163-2:1995	Plastics Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
UNE-EN ISO 11403-2:2012	Plastics - Acquisition and presentation of comparable multipoint data - Part 2: Thermal and processing properties (ISO 11403-2:2012)
BS EN ISO 11403-2:2012	Plastics. Acquisition and presentation of comparable multipoint data Thermal and processing properties
ISO 2898-2:2008	Plastics Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
ISO 877:1994	Plastics Methods of exposure to direct weathering, to weathering using glass-filtered daylight, and to intensified weathering by daylight using Fresnel mirrors
DIN EN ISO 3673-2:2012-10	Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins (ISO 3673-2:2012)
BS EN 12814-1:2000	Testing of welded joints of thermoplastics semi-finished products Bend test
UNE-EN ISO 11833-1:2012	Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 1: Sheets of thickness not less than 1 mm (ISO 11833-1:2012)
ISO 75-2:2013	Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite
BS EN ISO 10350-2:2011	Plastics. Acquisition and presentation of comparable single-point data Long-fibre-reinforced plastics
UNI EN ISO 180 : 2013	PLASTICS - DETERMINATION OF IZOD IMPACT STRENGTH
EN ISO 10350-2:2011	Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long-fibre-reinforced plastics (ISO 10350-2:2011)
I.S. EN ISO 294-3:2003	PLASTICS - INJECTION MOULDING OF TEST SPECIMENS OF THERMOPLASTIC MATERIALS - SMALL PLATES
UNI EN ISO 10350-2 : 2011	PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 2: LONG-FIBRE-REINFORCED PLASTICS
UNE-EN ISO 11963:2013	Plastics - Polycarbonate sheets - Types, dimensions and characteristics (ISO 11963:2012)
ONORM EN ISO 10350-2 : 2011	PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 2: LONG-FIBRE-REINFORCED PLASTICS
EN ISO 14663-2:2006	Plastics - Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 14663-2:1999)
EN ISO 294-3 : 2003	PLASTICS - INJECTION MOULDING OF TEST SPECIMENS OF THERMOPLASTIC MATERIALS - PART 3: SMALL PLATES
I.S. EN ISO 10350-2:2011	PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 2: LONG-FIBRE-REINFORCED PLASTICS
EN ISO 22007-4:2017	Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method (ISO 22007-4:2017)
UNI EN ISO 3167 : 2014	PLASTICS - MULTIPURPOSE TEST SPECIMENS
UNI EN ISO 14125 : 2011	FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF FLEXURAL PROPERTIES
UNI EN ISO 3673-2 : 2012	PLASTICS - EPOXY RESINS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES OF CROSSLINKED EPOXY RESINS
UNI EN ISO 4611 : 2011	PLASTICS - DETERMINATION OF THE EFFECTS OF EXPOSURE TO DAMP HEAT, WATER SPRAY AND SALT MIST
UNI EN ISO 11403-2 : 2012	PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 2: THERMAL AND PROCESSING PROPERTIES
UNI EN ISO 11963 : 2013	PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS
UNI EN ISO 62 : 2008	PLASTICS - DETERMINATION OF WATER ABSORPTION
EN ISO 4611:2010	Plastics - Determination of the effects of exposure to damp heat, water spray and salt mist (ISO 4611:2010)
UNI EN ISO 2898-2 : 2009	PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN ISO 14125:1998	FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF FLEXURAL PROPERTIES
UNI EN ISO 75-2 : 2013	PLASTICS - DETERMINATION OF TEMPERATURE OF DEFLECTION UNDER LOAD - PART 2: PLASTICS AND EBONITE
BS 2782-3.335A(1993) : AMD 8638	METHODS OF TESTING PLASTICS - MECHANICAL PROPERTIES - DETERMINATION OF FLEXURAL PROPERTIES
UNI EN ISO 604 : 2008	PLASTICS - DETERMINATION OF COMPRESSIVE PROPERTIES
UNI EN ISO 175 : 2010	PLASTICS - METHODS OF TEST FOR THE DETERMINATION OF THE EFFECTS OF IMMERSION IN LIQUID CHEMICALS
UNI EN ISO 306 : 2014	PLASTICS - THERMOPLASTIC MATERIALS - DETERMINATION OF VICAT SOFTENING TEMPERATURE (VST)
UNI EN ISO 527-2 : 2012	PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 2: TEST CONDITIONS FOR MOULDING AND EXTRUSION PLASTICS
ONORM EN ISO 527-5 : 2009	PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 5: TEST CONDITIONS FOR UNIDIRECTIONAL FIBRE-REINFORCED PLASTIC COMPOSITES
UNI EN ISO 8986-2 : 2010	PLASTICS - POLYBUTENE-1 (PB-1) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
UNI EN ISO 179-1 : 2010	PLASTICS - DETERMINATION OF CHARPY IMPACT PROPERTIES - PART 1: NON-INSTRUMENTED IMPACT TEST
BS 2782-8.832A(1991) : 1991 AMD 9463	METHODS OF TESTING PLASTICS - OTHER PROPERTIES - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) BY THE BENT STRIP METHOD
BS 2782-9 Method 941:1990	Methods of testing plastics. Sampling and test specimen preparation Determination of maximum reversion of amorphous thermoplastics moulding materials
I.S. EN ISO 10350-1:2017	PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 1: MOULDING MATERIALS (ISO 10350-1:2017)
16/30319043 DC : 0	BS EN ISO 4589-2 - PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 2: AMBIENT-TEMPERATURE TEST
I.S. EN ISO 6402-2:2004	PLASTICS - ACRYLONITRILE-STYRENE-ACRYLATE (ASA), ACRYLONITRILE - (ETHYLENE-PROPYLENE-DIENE) - STYRENE (AEPDS) AND ACRYLONITRILE-(CHLORINATED POLYETHYLENE)-STYRENE (ACS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN ISO 23667:2007	PACKAGING - TRANSPORT PACKAGING FOR DANGEROUS GOODS - RIGID PLASTICS AND PLASTICS COMPOSITE IBCS - COMPATIBILITY TESTING
12/30255180 DC : 0	BS EN ISO 11403-1 - PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 1: MECHANICAL PROPERTIES
BS ISO 7792-2 : 1997 AMD 15252	PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
02/121868 DC : DRAFT APR 2002	BS ISO 15314 - PLASTICS - METHODS FOR MARINE EXPOSURE
16/30315531 DC : 0	BS ISO 4582 - PLASTICS - DETERMINATION OF CHANGES IN COLOUR AND VARIATIONS IN PROPERTIES AFTER EXPOSURE TO DAYLIGHT UNDER GLASS, NATURAL WEATHERING OR LABORATORY LIGHT SOURCES
I.S. EN ISO 1873-2:2007	PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
11/30236286 DC : 0	BS EN ISO 11963 - PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS
04/30092689 DC : DRAFT OCT 2004	ISO 22088-5 - PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - PART 5: CONSTANT TENSILE DEFORMATION METHOD
BS EN ISO 22088-5:2009	Plastics. Determination of resistance to environmental stress cracking (ESC) Constant tensile deformation method
I.S. EN ISO 1872-2:2007	PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
ONORM EN ISO 11833-1 : 2012	PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: SHEETS OF THICKNESS NOT LESS THAN 1 MM (ISO 11833-1:2012)
BS ISO 15014:2007	Plastics. Extruded sheets of poly(vinylidene fluoride) (PVDF). Requirements and test methods
BS ISO 13636:2012	Plastics. Film and sheeting. Non-oriented poly(ethylene terephthalate) (PET) sheets
BS ISO 12817:2013	Fibre-reinforced plastic composites. Determination of open-hole compression strength
BS 2782-3.326G(1997) : 1997	PLASTICS - DETERMINATION OF TENSILE PROPERTIES - TEST CONDITIONS FOR UNIDIRECTIONAL FIBRE-REINFORCED PLASTIC COMPOSITES
ISO 11963:2012	Plastics Polycarbonate sheets Types, dimensions and characteristics
UNE-EN ISO 22088-5:2010	Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 5: Constant tensile deformation method (ISO 22088-5:2006)
16/30317348 DC : 0	BS EN 15860 - PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS
BS ISO 9352:2012	Plastics. Determination of resistance to wear by abrasive wheels
BS ISO 12815:2013	Fibre-reinforced plastic composites. Determination of plain-pin bearingstrength
BS 2782-1.120A,B,D,E(1990) : LATEST	METHODS OF TESTING PLASTICS - THERMAL PROPERTIES - METHODS 120A, B, D AND E - DETERMINATION OF VICAT SOFTENING TEMPERATURE OF THERMOPLASTICS
06/30130317 DC : DRAFT JULY 2006	ISO 11833-1 - PLASTICS - UNPLASTICIZED POLY (VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS
BS ISO 13003:2003	Fibre-reinforced plastics. Determination of fatigue properties under cyclic loading conditions
DIN ISO 15014 E : 2015	PLASTICS - EXTRUDED SHEETS OF POLY(VINYLIDENE FLUORIDE) (PVDF) - REQUIREMENTS AND TEST METHODS (ISO 15014:2007)
BS EN ISO 877-1:2010	Plastics. Methods of exposure to solar radiation General guidance
BS ISO 14663-2 : 1999 AMD 16029	PLASTICS - ETHYLENE/VINYL ALCOHOL (EVOH) COPOLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
11/30234454 DC : 0	BS EN ISO 6721-1 - PLASTICS - DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES - PART 1: GENERAL PRINCIPLES
BS ISO 7148-2:2012	Plain bearings. Testing of the tribological behaviour of bearing materials Testing of polymer-based bearing materials
DIN EN ISO 19069-2 E : 2016	PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 19069-2:2016)
03/118818 DC : DRAFT DEC 2003	BS EN ISO 7391-2 - PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS EN ISO 19069-2:2016	Plastics. Polypropylene (PP) moulding and extrusion materials Preparation of test specimens and determination of properties
17/30335677 DC : 0	BS EN ISO 178 - PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES
BS ISO 10366-2 : 94 AMD 10665	PLASTICS - METHYL METHYLACRYLATE/ACRYLONITRILE/BUTADIENE/STYRENE (MABS) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN ISO 14632:1999	EXTRUDED SHEETS OF POLYETHYLENE (PE-HD) - REQUIREMENTS AND TEST METHODS
04/30078970 DC : DRAFT OCT 2004	ISO 22088-1 - PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - PART 1: GENERAL GUIDANCE
BS 2782-3.326F(1997) : 1997	PLASTICS - DETERMINATION OF TENSILE PROPERTIES - TEST CONDITIONS FOR ISOTROPIC AND ORTHOTROPIC FIBRE-REINFORCED PLASTIC COMPOSITES
ISO 13586:2000	Plastics Determination of fracture toughness (GIC and KIC) Linear elastic fracture mechanics (LEFM) approach
UNI EN ISO 20753 : 2014	PLASTICS - TEST SPECIMENS
NF EN ISO 877-1 : 2011	PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 1: GENERAL GUIDANCE
I.S. EN ISO 15015:2011	PLASTICS - EXTRUDED SHEETS OF IMPACT-MODIFIED ACRYLONITRILE-STYRENE COPOLYMERS (ABS, AEPDS AND ASA) - REQUIREMENTS AND TEST METHODS
PREN ISO 11833-1 : DRAFT 2010	PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: SHEETS OF THICKNESS NOT LESS THAN 1 MM
ISO 15850:2014	Plastics Determination of tension-tension fatigue crack propagation Linear elastic fracture mechanics (LEFM) approach
DIN EN 15860:2016-07 (Draft)	PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS
DIN EN ISO 6721-1:2011-08	PLASTICS - DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES - PART 1: GENERAL PRINCIPLES
PREN ISO 75-2 : DRAFT 2011	PLASTICS - DETERMINATION OF TEMPERATURE OF DEFLECTION UNDER LOAD - PART 2: PLASTICS AND EBONITE (ISO/DIS 75-2:2011)
EN ISO 20753:2014	PLASTICS - TEST SPECIMENS (ISO 20753:2008)
ISO 6721-1:2011	Plastics Determination of dynamic mechanical properties Part 1: General principles
EN ISO 180:2000/A2:2013	PLASTICS - DETERMINATION OF IZOD IMPACT STRENGTH (ISO 180:2000/AMD 2:2013)
ISO 16770:2004	Plastics Determination of environmental stress cracking (ESC) of polyethylene Full-notch creep test (FNCT)
UNI EN ISO 11403-3 : 2014	PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 3: ENVIRONMENTAL INFLUENCES ON PROPERTIES
ISO 17281:2002	Plastics Determination of fracture toughness (GIC and KIC) at moderately high loading rates (1 m/s)
DIN EN ISO 14125:2011-05	Fibre-reinforced plastic composites - Determination of flexural properties (ISO 14125:1998 + Cor 1:2001 + Amd 1:2011)
DIN EN ISO 14130:1998-02	FIBRE REINFORCED PLASTIC COMPOSITES - DETERMINATION OF APPARENT INTERLAMINAR SHEAR STRENGTH BY SHORT-BEAM METHOD
DIN EN ISO 4892-1:2016-10	PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 4892-1:2016)
DIN EN ISO 7823-3:2007-08	Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 3: Continuous cast sheets (ISO 7823-3:2007)
DIN EN ISO 11542-2:2010-01	Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 11542-2:1998 + Cor. 1:2007) (includes Corrigendum AC:2008)
DIN EN ISO 175 E : 2011	PLASTICS - METHODS OF TEST FOR THE DETERMINATION OF THE EFFECTS OF IMMERSION IN LIQUID CHEMICALS
DIN EN ISO 3167:2014-11	PLASTICS - MULTIPURPOSE TEST SPECIMENS (ISO 3167:2014)
DIN EN ISO 7823-2:2003-12	PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 2: EXTRUDED SHEETS
DIN EN ISO 604 E : 2003	PLASTICS - DETERMINATION OF COMPRESSIVE PROPERTIES
BS EN ISO 16101:2004	Packaging. Transport packaging for dangerous goods. Plastics compatibility testing
ISO 4892-1:2016	Plastics Methods of exposure to laboratory light sources Part 1: General guidance
BS EN ISO 14529-2:2000	Plastics. Melamine/phenolic powder moulding compounds (MP-PMCs) Preparation of test specimens and determination of properties
UNE-EN ISO 179-1:2011	Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010)
BS EN ISO 12017:1996	Plastics. Poly(methyl methacrylate) double- and triple-skin sheets. Test methods
BS EN ISO 22088-4:2006	Plastics. Determination of resistance to environmental stress cracking (ESC) Ball or pin impression method
ISO 1873-2:2007	Plastics Polypropylene (PP) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
ISO 2897-2:2003	Plastics Impact-resistant polystyrene (PS-I) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
ONORM EN ISO 180 : 2013	PLASTICS - DETERMINATION OF IZOD IMPACT STRENGTH (ISO 180:2000 + AMD. 1:2006 + AMD. 2:2013)
BS EN ISO 1873-2:2007	Plastics. Polypropylene (PP) moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN ISO 4589-2:2017	Plastics. Determination of burning behaviour by oxygen index Ambient-temperature test
ISO 6252:1992	Plastics Determination of environmental stress cracking (ESC) Constant-tensile-stress method
DIN EN ISO 604:2003-12	PLASTICS - DETERMINATION OF COMPRESSIVE PROPERTIES
ISO 23667:2007	Packaging Transport packaging for dangerous goods Rigid plastics and plastics composite IBCs Compatibility testing
BS EN ISO 10724-2:2001	Plastics. Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) Small plates
ISO 14528-2:1999	Plastics Melamine-formaldehyde powder moulding compounds (MF-PMCs) Part 2: Preparation of test specimens and determination of properties
ISO 11403-3:2014	Plastics Acquisition and presentation of comparable multipoint data Part 3: Environmental influences on properties
BS EN ISO 527-4:1997	Plastics. Determination of tensile properties Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
ISO 179:1993	Plastics Determination of Charpy impact strength
ISO 4613-2:1995	Plastics Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
BS EN ISO 294-3:2003	Plastics. Injection moulding of test specimens of thermoplastic materials Small plates
BS EN ISO 3672-2:2001	Plastics. Unsaturated-polyester resins (UP-R) Preparation of test specimens and determination of properties
BS EN ISO 62:1999	Plastics. Determination of water absorption
BS EN ISO 75-2:2013	Plastics. Determination of temperature of deflection under load Plastics and ebonite
BS EN ISO 4892-1:2016	Plastics. Methods of exposure to laboratory light sources General guidance
BS EN ISO 295:2004	Plastics. Compression moulding of test specimens of thermosetting materials
ISO 14530-2:1999	Plastics Unsaturated-polyester powder moulding compounds (UP-PMCs) Part 2: Preparation of test specimens and determination of properties
ISO 14129:1997	Fibre-reinforced plastic composites — Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the plus or minus 45 degree tension test method
ISO 175:2010	Plastics Methods of test for the determination of the effects of immersion in liquid chemicals
UNE-EN ISO 4589-2:2017	Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test (ISO 4589-2:2017)
ISO 11833-2:1998	Plastics — Unplasticized poly(vinyl chloride) sheets — Types, dimensions and characteristics — Part 2: Sheets of thickness less than 1 mm
BS EN ISO 10366-2:2003	Plastics. Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials Preparation of test specimens and determination of properties
ISO 2580-2:2003	Plastics Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
BS EN ISO 22088-1:2006	Plastics. Determination of resistance to environmental stress cracking (ESC) General guidance
ISO 877-1:2009	Plastics — Methods of exposure to solar radiation — Part 1: General guidance
BS EN ISO 7823-2:2003	Plastics. Poly(methyl methacrylate) sheets. Types, dimensions and characteristics Extruded sheets
ISO 4600:1992	Plastics Determination of environmental stress cracking (ESC) Ball or pin impression method
ISO 4611:2010	Plastics Determination of the effects of exposure to damp heat, water spray and salt mist
ISO 16101:2004	Packaging Transport packaging for dangerous goods Plastics compatibility testing
ISO 22088-1:2006	Plastics Determination of resistance to environmental stress cracking (ESC) Part 1: General guidance
ISO 10724-2:1998	Plastics — Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) — Part 2: Small plates
BS EN ISO 15013:1999	Extruded sheets of polypropylene (PP). Requirements and test methods
ISO 4894-2:1995	Plastics Styrene/acrylonitrile (SAN) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
ISO 14529-2:1999	Plastics Melamine/phenolic powder moulding compounds (MP-PMCs) Part 2: Preparation of test specimens and determination of properties
ISO 11403-2:2012	Plastics — Acquisition and presentation of comparable multipoint data — Part 2: Thermal and processing properties
ISO 6259-1:2015	Thermoplastics pipes Determination of tensile properties Part 1: General test method
ISO 16871:2003	Plastics piping and ducting systems — Plastics pipes and fittings — Method for exposure to direct (natural) weathering
UNE-EN ISO 10350-2:2011	Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long-fibre-reinforced plastics (ISO 10350-2:2011)
BS EN ISO 306:2013	Plastics. Thermoplastic materials. Determination of Vicat softening temperature (VST)
ISO 10350:1993	Plastics Acquisition and presentation of comparable single-point data
ISO 3672-2:2000	Plastics — Unsaturated-polyester resins (UP-R) — Part 2: Preparation of test specimens and determination of properties
ISO 306:2013	Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST)
ISO 7823-1:2003	Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 1: Cast sheets
ISO 22088-3:2006	Plastics Determination of resistance to environmental stress cracking (ESC) Part 3: Bent strip method
BS EN ISO 75-3:2004	Plastics. Determination of temperature of deflection under load High-strength thermosetting laminates and long-fibre-reinforced plastics
BS EN ISO 14527-2:2000	Preparation of test specimens and determination of properties
ISO 22088-2:2006	Plastics Determination of resistance to environmental stress cracking (ESC) Part 2: Constant tensile load method
ISO 294-3:2002	Plastics Injection moulding of test specimens of thermoplastic materials Part 3: Small plates
ISO 11403-1:2014	Plastics Acquisition and presentation of comparable multipoint data Part 1: Mechanical properties
ISO 14130:1997	Fibre-reinforced plastic composites — Determination of apparent interlaminar shear strength by short-beam method
BS EN ISO 7823-1:2003	Plastics. Poly(methyl methacrylate) sheets. Types, dimensions and characteristics Cast sheets
ISO 6603-1:2000	Plastics Determination of puncture impact behaviour of rigid plastics Part 1: Non-instrumented impact testing
BS EN 14598-3:2005	Reinforced thermosetting moulding compounds. Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC) Specific requirements
ISO 1622-2:1995	Plastics Polystyrene (PS) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
BS EN ISO 6259-1:2015	Thermoplastics pipes. Determination of tensile properties General test method
BS EN ISO 22088-3:2006	Plastics. Determination of resistance to environmental stress cracking (ESC) Bent strip method
ISO 12017:1995	Plastics Poly(methyl methacrylate) double- and triple-skin sheets Test methods
ISO 6402-2:2003	Plastics Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
BS EN ISO 11833-1:2012	Plastics. Unplasticized poly(vinyl chloride) sheets. Types, dimensions and characteristics Sheets of thickness not less than 1 mm
UNE-EN ISO 13274:2014	Packaging - Transport packaging for dangerous goods - Plastics compatibility testing for packaging and IBCs (ISO 13274:2013)
UNE-EN ISO 14125:1999	FIBRE-REINFORCED PLASTICS COMPOSITES. DETERMINATION OF FLEXURAL PROPERTIES (ISO 14125:1998)
ISO 295:2004	Plastics — Compression moulding of test specimens of thermosetting materials
ISO 8256:2004	Plastics — Determination of tensile-impact strength
ISO 11542-2:1998	Plastics Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
ISO 25137-2:2009	Plastics Sulfone polymer moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
ISO 3167:2014	Plastics Multipurpose test specimens
ISO 180:2000	Plastics Determination of Izod impact strength
ISO 14526-2:1999	Plastics Phenolic powder moulding compounds (PF-PMCs) Part 2: Preparation of test specimens and determination of properties
ISO 10366-2:2003	Plastics Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
ISO 8986-2:2009	Plastics Polybutene-1 (PB-1) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
ISO 4599:1986	Plastics Determination of resistance to environmental stress cracking (ESC) Bent strip method
BS EN ISO 179-1:2010	Plastics. Determination of Charpy impact properties Non-instrumented impact test
ISO 3673-2:2012	Plastics — Epoxy resins — Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins
UNE-EN ISO 11403-3:2014	Plastics - Acquisition and presentation of comparable multipoint data - Part 3: Environmental influences on properties (ISO 11403-3:2014)
UNE-EN ISO 75-2:2013	Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2013)
UNE-EN ISO 3167:2014	Plastics - Multipurpose test specimens (ISO 3167:2014)
BS EN ISO 6402-2:2003	Plastics. Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN ISO 14663-2:2006	Plastics. Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN ISO 4600:1998	Plastics. Determination of environmental stress cracking (ESC). Ball or pin impression method
BS EN ISO 2897-2:2003	Plastics. Impact-resistant polystyrene (PS-I) moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN ISO 11403-1:2014	Plastics. Acquisition and presentation of comparable multipoint data Mechanical properties
BS EN ISO 14526-2:2000	Plastics. Phenolic powder moulding compounds (PF-PMCs) Preparation of test specimens and determination of properties
UNE-EN ISO 4892-1:2017	Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 4892-1:2016)
ISO 22088-4:2006	Plastics Determination of resistance to environmental stress cracking (ESC) Part 4: Ball or pin impression method
EN ISO 4892-1:2016	Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 4892-1:2016)
EN ISO 11403-2:2012	Plastics - Acquisition and presentation of comparable multipoint data - Part 2: Thermal and processing properties (ISO 11403-2:2012)
EN ISO 2898-2:2008	Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2898-2:2008)
EN ISO 1163-2 : 1999	PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 15252-2 : 1999	PLASTICS - EPOXY POWDER MOULDING COMPOUNDS (EP-PMCS) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 10366-2 : 2003	PLASTICS - METHYL METHACRYLATE-ACRYLONITRILE-BUTADIENE-STYRENE (MABS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 8986-2:2009	Plastics - Polybutene-1 (PB-1) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 8986-2:2009)
EN ISO 19069-2:2016	Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19069-2:2016)
EN ISO 6252 : 1997	PLASTICS - DETERMINATION OF ENVIRONMENTAL STRESS CRACKING (ESC) - CONSTANT-TENSILE-STRESS METHOD
EN ISO 4599 : 1996	PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - BENT STRIP METHOD
EN 14598-2:2005/AC:2006	REINFORCED THERMOSETTING MOULDING COMPOUNDS - SPECIFICATION FOR SHEET MOULDING COMPOUND (SMC) AND BULK MOULDING COMPOUND (BMC) - PART 2: METHODS OF TEST AND GENERAL REQUIREMENTS
EN ISO 1873-2:2007	Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1873-2:2007)
EN ISO 14529-2 : 1999	PLASTICS - MELAMINE/PHENOLIC POWDER MOULDING COMPOUNDS (MP-PMCS) - PART 2 - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 15310:2005	Fibre-reinforced plastic composites - Determination of the in-plane shear modulus by the plate twist method (ISO 15310:1999)
EN ISO 4613-2:1995/A1:2004	PLASTICS - ETHYLENE/VINYL ACETATE (E/VAC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 15526-2:2004	Plastics - Polyketone (PK) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 15526-2:2000)
EN ISO 3167:2014	Plastics - Multipurpose test specimens (ISO 3167:2014)
EN ISO 877 : 1996
EN ISO 14130 : 1997	FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF APPARENT INTERLAMINAR SHEAR STRENGTH BY SHORT-BEAM METHOD
EN ISO 10350-1:2017	Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials (ISO 10350-1:2017)
EN ISO 3672-2 : 2001	PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 22088-4:2006	Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 4: Ball or pin impression method (ISO 22088-4:2006)
EN ISO 179-1:2010	Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010)
EN ISO 2580-2 : 2003	PLASTICS - ACRYLONITRILE-BUTADIENE-STYRENE (ABS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 10724-2 : 2000	PLASTICS - INJECTION MOULDING OF TEST SPECIMENS OF THERMOSETTING POWDER MOULDING COMPOUNDS (PMCS) - PART 2: SMALL PLATES
EN ISO 11833-2:2006	Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 2: Sheets of thickness less than 1 mm (ISO 11833-2:1998)
EN ISO 877-1:2010	Plastics - Methods of exposure to solar radiation - Part 1: General guidance (ISO 877-1:2009)
EN ISO 14530-2 : 1999	PLASTICS - UNSATURATED-POLYESTER POWDER MOULDING COMPOUNDS (UP-PMCS) - PART 2 - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 15013:2007	Plastics - Extruded sheets of polypropylene (PP) - Requirements and test methods (ISO 15013:2007)
EN ISO 22088-5:2009	Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 5: Constant tensile deformation method (ISO 22088-5:2006)
EN ISO 22088-2:2006	Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 2: Constant tensile load method (ISO 22088-2:2006)
EN ISO 604 : 2003	PLASTICS - DETERMINATION OF COMPRESSIVE PROPERTIES (ISO 604:2002)
EN ISO 7823-1:2003	Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 1: Cast sheets (ISO 7823-1:2003)
EN ISO 8256:2004	Plastics - Determination of tensile-impact strength (ISO 8256:2004)
EN ISO 17855-2:2016	Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 17855-2:2016)
EN ISO 1622-2 : 1999	PLASTICS - POLYSTYRENE (PS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 6259-1:2015	Thermoplastics pipes - Determination of tensile properties - Part 1: General test method (ISO 6259-1:2015)
EN ISO 306:2013	Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2013)
EN ISO 4894-2 : 1999	PLASTICS - STYRENE/ACRYLONITRILE (SAN) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 14528-2 : 1999	PLASTICS - MELAMINE/PHENOLIC POWDER MOULDING COMPOUNDS (MP-PMCS) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 62:2008	Plastics - Determination of water absorption (ISO 62:2008)
EN ISO 1872-2:2007	Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1872-2:2007)
EN ISO 4600 : 1997	PLASTICS - DETERMINATION OF ENVIRONMENTAL STRESS CRACKING (ESC) - BALL OR PIN IMPRESSION METHOD
EN ISO 3673-2:2012	Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins (ISO 3673-2:2012)
EN ISO 75-3:2004/AC:2006	Plastics - Determination of temperature of deflection under load - Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics (ISO 75-3:2004)
EN ISO 6603-1 : 2000	PLASTICS - DETERMINATION OF PUNCTURE IMPACT BEHAVIOUR OF RIGID PLASTICS - PART 1: NON-INSTRUMENTED IMPACT TESTING
EN ISO 4589-2:2017	Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test (ISO 4589-2:2017)
EN ISO 75-2:2013	Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2013)
EN ISO 11833-1:2012	Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 1: Sheets of thickness not less than 1 mm (ISO 11833-1:2012)
EN ISO 7823-2 : 2003	PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 2: EXTRUDED SHEETS
EN 14598-3:2005	Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements
EN ISO 14129 : 1997	FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF THE IN-PLANE SHEAR STRESS/SHEAR STRAIN RESPONSE, INCLUDING THE IN-PLANE SHEAR MODULUS AND STRENGTH, BY THE +/- 45 DEGREES TENSION TEST METHOD (ISO 14129:1997)
EN ISO 295 : 2004	PLASTICS - COMPRESSION MOULDING OF TEST SPECIMENS OF THERMOSETTING MATERIALS
EN ISO 175:2010	Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:2010)
EN ISO 22088-1:2006	Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 1: General guidance (ISO 22088-1:2006)
EN ISO 15015:2011	Plastics - Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) - Requirements and test methods (ISO 15015:2011)
EN ISO 6402-2 : 2003	PLASTICS - ACRYLONITRILE-STYRENE-ACRYLATE (ASA), ACRYLONITRILE-(ETHYLENE-PROPYLENE-DIENE)-STYRENE (AEPDS) AND ACRYLONITRILE-(CHLORINATED POLYETHYLENE)-STYRENE (ACS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 14527-2 : 1999	PLASTICS - UREA-FORMALDEHYDE AND UREA/MELAMINE-FORMALDEHYDE POWDER MOULDING COMPOUNDS (UF- AND UF/MF-PMCS) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 2897-2 : 2003	PLASTICS - IMPACT-RESISTANT POLYSTYRENE (PS-I) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 22088-3:2006	Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 3: Bent strip method (ISO 22088-3:2006)
EN ISO 25137-2:2017	Plastics - Sulfone polymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 25137-2:2009)
PREN ISO 6721-1 : DRAFT 2011	PLASTICS - DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES - PART 1: GENERAL PRINCIPLES
DIN EN ISO 25137-2 E : 2017	PLASTICS - SULFONE POLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 25137-2:2009)
BS EN 15860:2010	Plastics. Thermoplastic semi-finished products for machining. Requirements and test methods
I.S. EN 1013-3:1998	LIGHT TRANSMITTING PROFILED PLASTIC SHEETING FOR SINGLE SKIN ROOFING - PART 3: SPECIFIC REQUIREMENTS AND TEST METHODS FOR SHEETS OF POLYVINYL CHLORIDE (PVC)
10/30227822 DC : DRAFT DEC 2010	BS ISO 7148-2 - PLAIN BEARINGS - TESTING OF THE TRIBOLOGICAL BEHAVIOUR OF BEARING MATERIALS - PART 2: TESTING OF POLYMER-BASED BEARING MATERIALS
BS ISO 6402-2 : 94 AMD 10652
I.S. EN ISO 4599:1997	PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - BENT STRIP METHOD
BS ISO 11403-1 : AMD 10683	PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - MECHANICAL PROPERTIES
BS ISO 25137-2 : 2009	PLASTICS - SULFONE POLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS 2782-3 Method 370:1990	Methods of testing plastics. Mechanical properties Determination of resistance to wear by abrasive wheels
ISO 1268-4:2005	Fibre-reinforced plastics Methods of producing test plates Part 4: Moulding of prepregs
BS 2782-5:Method 540D:1995	Methods of testing plastics. Optical and colour properties, weathering Methods of exposure to laboratory light sources. General guidance
UNE-ISO 1268-4:2012	Fibre-reinforced plastics -- Methods of producing test plates -- Part 4: Moulding of prepregs
BS ISO 18489:2015	Polyethylene (PE) materials for piping systems. Determination of resistance to slow crack growth under cyclic loading. Cracked Round Bar test method
ISO 12817:2013	Fibre-reinforced plastic composites — Determination of open-hole compression strength
BS 1214:1977	Specification for hessian sandbags and rot-proofed hessian sandbags
13/30274532 DC : 0	BS EN ISO 6259-1 - THERMOPLASTICS PIPES - DETERMINATION OF TENSILE PROPERTIES - PART 1: GENERAL TEST METHOD
BIS IS 13360-5-8 : 2013	PLASTICS - METHODS OF TESTING - PART 5: MECHANICAL PROPERTIES - SECTION 8: DETERMINATION OF COMPRESSIVE PROPERTIES
EN ISO 14632 : 1998	EXTRUDED SHEETS OF POLYETHYLENE (PE-HD) - REQUIREMENTS AND TEST METHODS
UNE-ISO 4582:2014	Plastics. Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources
ISO 13003:2003	Fibre-reinforced plastics Determination of fatigue properties under cyclic loading conditions
14/30292918 DC : 0	BS ISO 18489 - POLYETHYLENE (PE) MATERIALS - DETERMINATION OF RESISTANCE TO SLOW CRACK GROWTH UNDER CYCLIC LOADING - CRACKED ROUND BAR TEST METHOD
I.S. EN ISO 19069-2:2016	PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 19069-2:2016)
07/30152076 DC : 0	BS ISO 25137-2 - PLASTICS - SULFONE PLASTICS (SP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS ISO 4582:2017	Plastics. Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources
07/30127284 DC : 0	BS EN ISO 4892-1 - PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE
BS 2782-9 Method 931A:1988	Methods of testing plastics. Sampling and test specimen preparation Preparation and use of multipurpose test specimens
BS ISO 16241:2005	Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe and fitting products (PENT)
BS 2782-8.831A.B(1993) : 1993 AMD 9929	METHODS OF TESTING PLASTICS - OTHER PROPERTIES - DETERMINATION OF ENVIRONMENTAL STRESS CRACKING (ESC) BY THE BALL OR PIN IMPRESSION METHOD
ASTM D 5942 : 1996	Test Method for Determination of Charpy Impact Strength (Withdrawn 1998)
EN ISO 7823-3:2007	Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 3: Continuous cast sheets (ISO 7823-3:2007)
BS ISO 11833-1:1998	Plastics. Unplasticized poly(vinyl chloride) sheets. Tapes, dimensions and characteristics Sheets of thickness not less than 1 mm
BS 2782-8.833A.C(1993) : 1993 AMD 9927	METHODS OF TESTING PLASTICS - OTHER PROPERTIES - DETERMINATION OF ENVIRONMENTAL STRESS CRACKING (ESC) BY THE CONSTANT TENSILE STRESS METHOD
BS ISO 16770:2004	Plastics. Determination of environmental stress cracking (ESC) of polyethylene. Full-notch creep test (FNCT)
ISO 15014:2007	Plastics Extruded sheets of poly(vinylidene fluoride) (PVDF) Requirements and test methods
PREN ISO 11963 : DRAFT 2011	PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS
ASTM D 5943 : 1996	Test Method for Determination of Flexural Properties (Withdrawn 1998)
I.S. EN ISO 6721-1:2011	PLASTICS - DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES - PART 1: GENERAL PRINCIPLES
ISO 604:2002	Plastics — Determination of compressive properties
ISO 15314:2004	Plastics Methods for marine exposure
EN ISO 12017 : 1996	PLASTICS - POLY(METHYL METHACRYLATE) DOUBLE- AND TRIPLE-SKIN SHEETS - TEST METHODS
ISO 9352:2012	Plastics — Determination of resistance to wear by abrasive wheels
UNE-EN ISO 6721-1:2012	Plastics - Determination of dynamic mechanical properties - Part 1: General principles (ISO 6721-1:2011)
BS EN ISO 10350-1:2017	Plastics. Acquisition and presentation of comparable single-point data Moulding materials
ASTM D 5937 : 1996	Standard Test Method for Determination of Tensile Properties and Test Conditions for Moulding and Extrusion Plastics (Withdrawn 1998)
ONORM EN ISO 178 : 2013	PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010 + AMD 1:2013)
ONORM EN ISO 11403-3 : 2015	PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 3: ENVIRONMENTAL INFLUENCES ON PROPERTIES (ISO 11403-3:2014)
UNE-EN ISO 20753:2015	Plastics - Test specimens (ISO 20753:2008)
ISO 7391-2:2006	Plastics Polycarbonate (PC) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
EN 15860:2010	Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
DIN EN ISO 25137-2:2016-08 (Draft)	PLASTICS - SULFONE POLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 25137-2:2009)
I.S. EN 15860:2010	PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS
DIN EN ISO 2580-2 E : 2004	PLASTICS - ACRYLONITRILE-BUTADIENE-STYRENE (ABS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 179-1:2010-11	Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010)
DIN EN ISO 10366-2:2004-05	PLASTICS - METHYL METHACRYLATE-ACRYLONITRILE-BUTADIENE-STYRENE (MABS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 11403-2 E : 2013	PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 2: THERMAL AND PROCESSING PROPERTIES (ISO 11403-2:2012)
DIN EN ISO 7823-1:2003-12	PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: CAST SHEETS
BS EN ISO 8986-2:2009	Plastics. Polybutene-1 (PB-1) moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN ISO 14130:1998	Fibre-reinforced plastic composites. Determination of apparent interlaminar shear strength by short-beam method
ISO 22007-4:2017	Plastics — Determination of thermal conductivity and thermal diffusivity — Part 4: Laser flash method
ISO 527-2:2012	Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
BS EN ISO 2898-2:2008	Plastics. Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials Preparation of test specimens and determination of properties (ISO 2898-2:2008)
ISO 15252-2:1999	Plastics Epoxy powder moulding compounds (EP-PMCs) Part 2: Preparation of test specimens and determination of properties
BS EN ISO 1163-2:2000	Plastics. Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials Preparation of test specimens and determination of properties
UNE-EN ISO 3673-2:2013	Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins (ISO 3673-2:2012)
ISO 1872-2:2007	Plastics Polyethylene (PE) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
BS EN ISO 527-2:1996	Plastics. Determination of tensile properties Test conditions for moulding and extrusion plastics
BS EN ISO 4611:2010	Plastics. Determination of the effects of exposure to damp heat, water spray and salt mist
BS EN 1056:1996	Plastics piping and ducting systems. Plastics pipes and fittings. Method for exposure to direct (natural) weathering
BS EN ISO 11963:2012	Plastics. Polycarbonate sheets. Types, dimensions and characteristics
BS EN ISO 175:2010	Plastics. Methods of test for the determination of the effects of immersion in liquid chemicals
ISO 4589-2:2017	Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test
BS EN ISO 14631:1999	Extruded sheets of impact-modified polystyrene (PS-I). Requirements and test methods
BS EN ISO 22088-2:2006	Plastics. Determination of resistance to environmental stress cracking (ESC) Constant tensile load method
ISO 14663-2:1999	Plastics Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
ISO 62:2008	Plastics Determination of water absorption
BS EN ISO 16871:2003	Plastics piping and ducting systems. Plastics pipes and fittings. Method for exposure to direct (natural) weathering
BS EN 1013-3:1998	Light transmitting profiled plastic sheeting for single skin roofing Specific requirements and test methods for sheets of polyvinyl chloride (PVC)
BS EN ISO 7391-2:2006	Plastics. Polycarbonate (PC) moulding and extrusion materials Preparation of test specimens and determination of properties
ISO 22088-5:2006	Plastics Determination of resistance to environmental stress cracking (ESC) Part 5: Constant tensile deformation method
ISO 14527-2:1999	Plastics Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) Part 2: Preparation of test specimens and determination of properties
BS EN ISO 15310:2005	Reinforced plastics. Determination of the in-plane shear modulus by the plate twist method
ISO 15526-2:2000	Plastics Polyketone (PK) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
BS EN ISO 14530-2:2000	Plastics. Unsaturated-polyester powder moulding compounds (UP-PMCs) Preparation of test specimens and determination of properties
ISO 179-1:2010	Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
ISO 15013:2007	Plastics Extruded sheets of polypropylene (PP) Requirements and test methods
DIN EN ISO 2898-2:2009-03	PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 16101 : 2004	PACKAGING - TRANSPORT PACKAGING FOR DANGEROUS GOODS - PLASTICS COMPATIBILITY TESTING
EN ISO 527-5:2009	Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites (ISO 527-5:2009)
I.S. EN ISO 527-4:1997	PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 4: TEST CONDITIONS FOR ISOTROPIC AND ORTHOTROPIC FIBRE-REINFORCED PLASTIC COMPOSITES
EN ISO 13274:2013/AC:2014	PACKAGING - TRANSPORT PACKAGING FOR DANGEROUS GOODS - PLASTICS COMPATIBILITY TESTING FOR PACKAGING AND IBCS (ISO 13274:2013/COR 1:2014)
DIN EN ISO 14663-2:2006-06	PLASTICS - ETHYLENE/VINYL ALCOHOL (EVOH) COPOLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 527-4:1997	PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 4: TEST CONDITIONS FOR ISOTROPIC AND ORTHOTROPIC FIBRE-REINFORCED PLASTIC COMPOSITES
UNI EN ISO 527-5 : 2009	PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 5: TEST CONDITIONS FOR UNIDIRECTIONAL FIBRE-REINFORCED PLASTIC COMPOSITES
EN 13421:2006	Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites
DIN EN ISO 11403-2:2013-01	Plastics - Acquisition and presentation of comparable multipoint data - Part 2: Thermal and processing properties (ISO 11403-2:2012)
DIN EN ISO 15013:2008-01	Plastics - Extruded sheets of polypropylene (PP) - Requirements and test methods (ISO 15013:2007); German version EN ISO 15013:2007
DIN EN ISO 11403-3:2002-02	PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 3: ENVIRONMENTAL INFLUENCES ON PROPERTIES (ISO 11403-3:2014)
DIN EN ISO 527-5:2010-01	Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites (ISO 527-5:2009)
DIN EN ISO 527-2:2012-06	Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012)
DIN EN ISO 8986-2:2010-04	PLASTICS - POLYBUTENE-1 (PB-1) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 11403-1:2003-09	PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 1: MECHANICAL PROPERTIES (ISO 11403-1:2014)
DIN EN ISO 22007-4:2012-04	PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 4: LASER FLASH METHOD (ISO 22007-4:2017)
DIN EN ISO 15310:2005-10	Fibre-reinforced plastic composites - Determination of the in-plane shear modulus by the plate twist method (ISO 15310:1999)
DIN EN ISO 4892-1:2001-09	PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 4892-1:2016)
BS 2782-3.359(1993) : 1993 AMD 8643	METHODS OF TESTING PLASTICS - MECHANICAL PROPERTIES - DETERMINATION OF CHARPY IMPACT STRENGTH
BS 2782-3.345A(1993) : 1993 AMD 8637	METHODS OF TESTING PLASTICS - MECHANICAL PROPERTIES - DETERMINATION OF COMPRESSIVE PROPERTIES
BS 2782-9.931A(1993) : 1993 AMD 8626	METHODS OF TESTING PLASTICS - SAMPLING AND TEST SPECIMEN PREPARATION - PREPARATION AND USE OF MULTIPURPOSE TEST SPECIMENS
BS 2782-3.350(1993) : 1993 AMD 8641	METHODS OF TESTING PLASTICS - MECHANICAL PROPERTIES - DETERMINATION OF IZOD IMPACT STRENGTH
BS 2782-1.121A.C(1994) : 94 AMD 8646	METHODS OF TESTING PLASTICS - THERMAL PROPERTIES - DETERMINATION OF TEMPERATURE OF DEFLECTION UNDER LOAD OF PLASTICS AND EBONITE
BS 2782-5.551A(1988) : 1988 AMD 10820	METHODS OF TESTING PLASTICS - OPTICAL AND COLOUR PROPERTIES, WEATHERING - DETERMINATION OF THE EFFECTS OF EXPOSURE TO DAMP HEAT, WATER SPRAY AND SALT MIST
BS 7008-1(1994) : AMD 8821	ACQUISITION AND PRESENTATION OF COMPARABLE DATA FOR BASIC PROPERTIES OF PLASTICS - METHOD FOR SINGLE POINT DATA

Standards Referencing This Book - (Show below) - (Hide below)

ISO 6106:2013	Abrasive products — Checking the grain size of superabrasives
ISO 293:2004	Plastics — Compression moulding of test specimens of thermoplastic materials
ISO 3167:2014	Plastics Multipurpose test specimens
ISO 295:2004	Plastics — Compression moulding of test specimens of thermosetting materials
ISO 294:1995	Plastics Injection moulding of test specimens of thermoplastic materials
ISO 6104:2005	Superabrasive products — Rotating grinding tools with diamond or cubic boron nitride — General survey, designation and multilingual nomenclature
ISO 468:1982	Surface roughness — Parameters, their values and general rules for specifying requirements
ISO 291:2008	Plastics Standard atmospheres for conditioning and testing
ISO 2557-2:1986	Plastics Amorphous thermoplastics Preparation of test specimens with a specified reversion Part 2: Plates
ISO 2557-1:1989	Plastics Amorphous thermoplastics Preparation of test specimens with a specified maximum reversion Part 1: Bars
ISO 3855:1977	Milling cutters — Nomenclature
ISO 21950:2001	Coated abrasives Plain discs

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Add To Cart

Product Format

Quantity

Buy now

Add to cart

Create account