Skip to content
Please enter a keyword to search

  • ISO 30013:2011

    Current The latest, up-to-date edition.

    Rubber and plastics hoses Methods of exposure to laboratory light sources Determination of changes in colour, appearance and other physical properties

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s):  French, English

    Published date:  06-10-2011

    Publisher:  International Organization for Standardization

    Add To Cart

    Abstract - (Show below) - (Hide below)

    ISO 30013:2011 specifies methods for the exposure of rubber and plastics hoses to three types of laboratory light source (xenon-arc, fluorescent UV and open-flame carbon-arc lamps).

    These methods are designed to simulate the exposure of hoses used in an outdoor environment or in an indoor environment.

    Four types of test piece (two strained and two unstrained upon exposure) are specified. Results from the three light sources and the different sets of exposure conditions specified are not comparable.

    General Product Information - (Show below) - (Hide below)

    Development Note Supersedes ISO/DIS 30013, ISO 11758 and ISO 8580. (10/2011)
    Document Type Standard
    Publisher International Organization for Standardization
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    DIN EN 16436-1:2016-04 RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS
    ISO 8028:2017 Rubber and/or plastics hoses and hose assemblies for airless paint spraying — Specification
    UNE-EN 16436-1:2014 Rubber and plastics hoses, tubing and assemblies for use with propane and butane and their mixture in the vapour phase - Part 1: Hoses and tubings
    DIN EN 1947:2014-09 FIRE-FIGHTING HOSES - SEMI-RIGID DELIVERY HOSES AND HOSE ASSEMBLIES FOR PUMPS AND VEHICLES
    UNE-EN ISO 6224:2012 Thermoplastics hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 6224:2011)
    BS EN ISO 5774:2016 Plastics hoses. Textile-reinforced types for compressed-air applications. Specification
    BS ISO 4642-1:2015 Rubber and plastics hoses, non-collapsible, for fire-fighting service Semi-rigid hoses for fixed systems
    EN ISO 8028:2018 Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification (ISO 8028:2017)
    I.S. EN 16436-1:2014 RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS
    EN 16436-1:2014+A1:2015 RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS
    UNE-EN ISO 3994:2014 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification (ISO 3994:2014)
    I.S. EN ISO 6224:2011 THERMOPLASTICS HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION (ISO 6224:2011)
    I.S. EN 1947:2014 FIRE-FIGHTING HOSES - SEMI-RIGID DELIVERY HOSES AND HOSE ASSEMBLIES FOR PUMPS AND VEHICLES
    I.S. EN ISO 5774:2016 PLASTICS HOSES - TEXTILE-REINFORCED TYPES FOR COMPRESSED-AIR APPLICATIONS - SPECIFICATION (ISO 5774:2016)
    I.S. EN ISO 14113:2013 GAS WELDING EQUIPMENT - RUBBER AND PLASTICS HOSE AND HOSE ASSEMBLIES FOR USE WITH INDUSTRIAL GASES UP TO 450 BAR (45 MPA) (ISO 14113:2013)
    I.S. EN ISO 3994:2014 PLASTICS HOSES - HELICAL-THERMOPLASTIC-REINFORCED THERMOPLASTICS HOSES FOR SUCTION AND DISCHARGE OF AQUEOUS MATERIALS - SPECIFICATION (ISO 3994:2014)
    I.S. EN 694:2014 FIRE-FIGHTING HOSES - SEMI-RIGID HOSES FOR FIXED SYSTEMS
    DIN EN 1947:2002-11 FIRE-FIGHTING HOSES - SEMI-RIGID DELIVERY HOSES AND HOSE ASSEMBLIES FOR PUMPS AND VEHICLES
    UNI EN 694 : 2014 FIRE-FIGHTING HOSES - SEMI-RIGID HOSES FOR FIXED SYSTEMS
    BS EN ISO 8029:2014 Plastics hose. General-purpose collapsible water hose, textile-reinforced. Specification
    BS ISO 15686-2:2012 Buildings and constructed assets. Service life planning Service life prediction procedures
    15/30301522 DC : 0 BS ISO 13775-2 - THERMOPLASTIC TUBING AND HOSES FOR AUTOMOTIVE USE - PART 2: PETROLEUM-BASED-FUEL APPLICATIONS
    BS EN 13618:2016 Flexible hose assemblies in drinking water installations. Functional requirements and test methods
    DIN EN 16436-1 E : 2016 RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS
    DIN EN ISO 8029:2014-12 PLASTICS HOSE - GENERAL-PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE-REINFORCED - SPECIFICATION (ISO 8029:2014)
    BS ISO 4642-2:2015 Rubber and plastics hoses, non-collapsible, for fire-fighting service Semi-rigid hoses (and hose assemblies) for pumps and vehicles
    UNI EN ISO 8029 : 2014 PLASTICS HOSE - GENERAL-PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE-REINFORCED - SPECIFICATION
    ISO 4642-1:2015 Rubber and plastics hoses, non-collapsible, for fire-fighting service Part 1: Semi-rigid hoses for fixed systems
    ISO 13775-1:2015 Thermoplastic tubing and hoses for automotive use Part 1: Non-fuel applications
    DIN EN ISO 14113:2014-02 GAS WELDING EQUIPMENT - RUBBER AND PLASTICS HOSE AND HOSE ASSEMBLIES FOR USE WITH INDUSTRIAL GASES UP TO 450 BAR (45 MPA) (ISO 14113:2013)
    DIN EN 694:2014-10 FIRE-FIGHTING HOSES - SEMI-RIGID HOSES FOR FIXED SYSTEMS
    DIN EN ISO 3994:2015-11 PLASTICS HOSES - HELICAL-THERMOPLASTIC-REINFORCED THERMOPLASTICS HOSES FOR SUCTION AND DISCHARGE OF AQUEOUS MATERIALS - SPECIFICATION (ISO 3994:2014)
    BS EN 694:2014 Fire-fighting hoses. Semi-rigid hoses for fixed systems
    UNI EN ISO 14113 : 2013 GAS WELDING EQUIPMENT - RUBBER AND PLASTICS HOSE AND HOSE ASSEMBLIES FOR USE WITH INDUSTRIAL GASES UP TO 450 BAR (45 MPA)
    UNI EN ISO 6224 : 2011 THERMOPLASTICS HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION
    UNI EN 1947 : 2014 FIRE-FIGHTING HOSES - SEMI-RIGID DELIVERY HOSES AND HOSE ASSEMBLIES FOR PUMPS AND VEHICLES
    UNI EN ISO 3994 : 2014 PLASTICS HOSES - HELICAL-THERMOPLASTIC-REINFORCED THERMOPLASTICS HOSES FOR SUCTION AND DISCHARGE OF AQUEOUS MATERIALS - SPECIFICATION
    ISO 4642-2:2015 Rubber and plastics hoses, non-collapsible, for fire-fighting service Part 2: Semi-rigid hoses (and hose assemblies) for pumps and vehicles
    SAE J 3082 : 2015 AUXILIARY TWO CONDUCTOR ELECTRICAL POWER CONNECTOR FOR TRUCK-TRAILER HIGH POWER JUMPER CABLE
    BS ISO 13775-1:2015 Thermoplastic tubing and hoses for automotive use Non-fuel applications
    ISO 15686-2:2012 Buildings and constructed assets — Service life planning — Part 2: Service life prediction procedures
    BS EN ISO 8028:2018 Rubber and/or plastics hoses and hose assemblies for airless paint spraying. Specification
    I.S. EN ISO 8029:2014 PLASTICS HOSE - GENERAL-PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE-REINFORCED - SPECIFICATION (ISO 8029:2014)
    ISO 13363:2016 Rubber and plastics hoses for marine-engine wet-exhaust systems — Specification
    I.S. EN 13618:2016 FLEXIBLE HOSE ASSEMBLIES IN DRINKING WATER INSTALLATIONS - FUNCTIONAL REQUIREMENTS AND TEST METHODS
    ISO 6224:2011 Thermoplastics hoses, textile-reinforced, for general-purpose water applications — Specification
    ISO 14113:2013 Gas welding equipment — Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa)
    ISO 3994:2014 Plastics hoses — Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials — Specification
    BS EN ISO 3994:2014 Plastics hoses. Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials. Specification
    UNE-EN 694:2015 Fire-fighting hoses - Semi-rigid hoses for fixed systems
    BS EN 1947:2014 Fire-fighting hoses. Semi-rigid delivery hoses and hose assemblies for pumps and vehicles
    UNE-EN 1947:2015 Fire-fighting hoses - Semi-rigid delivery hoses and hose assemblies for pumps and vehicles
    UNE-EN ISO 5774:2016 Plastics hoses - Textile-reinforced types for compressed-air applications - Specification (ISO 5774:2016)
    EN ISO 8029:2014 Plastics hose - General-purpose collapsible water hose, textile-reinforced - Specification (ISO 8029:2014)
    EN ISO 6224:2011 Thermoplastics hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 6224:2011)
    EN 13618:2016 Flexible hose assemblies in drinking water installations - Functional requirements and test methods
    EN 1947:2014 Fire-fighting hoses - Semi-rigid delivery hoses and hose assemblies for pumps and vehicles
    EN ISO 3994:2014 PLASTICS HOSES - HELICAL-THERMOPLASTIC-REINFORCED THERMOPLASTICS HOSES FOR SUCTION AND DISCHARGE OF AQUEOUS MATERIALS - SPECIFICATION (ISO 3994:2014)
    EN 694:2014 Fire-fighting hoses - Semi-rigid hoses for fixed systems
    EN ISO 5774:2016 Plastics hoses - Textile-reinforced types for compressed-air applications - Specification (ISO 5774:2016)
    EN ISO 14113:2013 Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) (ISO 14113:2013)
    DIN EN 13618:2016-05 (Draft) FLEXIBLE HOSE ASSEMBLIES IN DRINKING WATER INSTALLATIONS - FUNCTIONAL REQUIREMENTS AND TEST METHODS
    15/30317642 DC : 0 BS EN ISO 8028 - RUBBER AND/OR PLASTICS HOSES AND HOSE ASSEMBLIES FOR AIRLESS PAINT SPRAYING - SPECIFICATION
    UNE-EN ISO 8029:2014 Plastics hose - General-purpose collapsible water hose, textile-reinforced - Specification (ISO 8029:2014)
    BS ISO 13775-2:2016 Thermoplastic tubing and hoses for automotive use Petroleum-based-fuel applications
    ISO 13775-2:2016 Thermoplastic tubing and hoses for automotive use Part 2: Petroleum-based-fuel applications
    I.S. EN ISO 8028:2018 RUBBER AND/OR PLASTICS HOSES AND HOSE ASSEMBLIES FOR AIRLESS PAINT SPRAYING - SPECIFICATION (ISO 8028:2017)
    BS EN 16436-1 : 2014 RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS
    ISO 5774:2016 Plastics hoses — Textile-reinforced types for compressed-air applications — Specification
    BS EN ISO 14113:2013 Gas welding equipment. Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa)
    ISO 8029:2014 Plastics hose — General-purpose collapsible water hose, textile-reinforced — Specification
    DIN EN 13618:2017-03 FLEXIBLE HOSE ASSEMBLIES IN DRINKING WATER INSTALLATIONS - FUNCTIONAL REQUIREMENTS AND TEST METHODS
    DIN EN ISO 6224:2012-02 Thermoplastics hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 6224:2011)

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 7724-1:1984 Paints and varnishes Colorimetry Part 1: Principles
    ISO 4892-1:2016 Plastics Methods of exposure to laboratory light sources Part 1: General guidance
    ISO 4665:2016 Rubber, vulcanized or thermoplastic — Resistance to weathering
    ISO 23529:2016 Rubber General procedures for preparing and conditioning test pieces for physical test methods
    ISO 7724-2:1984 Paints and varnishes Colorimetry Part 2: Colour measurement
    ISO 7326:2016 Rubber and plastics hoses Assessment of ozone resistance under static conditions
    ISO 8330:2007 Rubber and plastics hoses and hose assemblies Vocabulary
    ISO 7724-3:1984 Paints and varnishes Colorimetry Part 3: Calculation of colour differences
    ISO 4892-3:2016 Plastics Methods of exposure to laboratory light sources Part 3: Fluorescent UV lamps
    ISO 291:2008 Plastics Standard atmospheres for conditioning and testing
    ISO 4582:2017 Plastics — Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources
    ISO 4892-4:2013 Plastics — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc lamps
    ISO 4892-2:2013 Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps
    ISO 105-A02:1993 Textiles Tests for colour fastness Part A02: Grey scale for assessing change in colour
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective