Skip to content
Please enter a keyword to search

  • ISO 3105:1994

    Current The latest, up-to-date edition.

    Glass capillary kinematic viscometers — Specifications and operating instructions

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s):  English, French

    Published date:  01-12-1994

    Publisher:  International Organization for Standardization

    Add To Cart

    Abstract - (Show below) - (Hide below)

    Cancels and replaces the first edition (1976). Gives specifications and operating instructions for glass capillary viscometers widely used for the determination of kinematic viscosity of petroleum products by the procedure described in ISO 3104. Also describes the calibration of these viscometers. These viscometers are modified Ostwald viscometers, suspended-level viscometers and reverse-flow viscometers.

    General Product Information - (Show below) - (Hide below)

    Development Note Also numbered as BS 2000-71.2(1995) (06/2005)
    Document Type Standard
    Publisher International Organization for Standardization
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    DIN 51563:2011-04 Testing of Mineral Oils and Related Materials - Determination of Viscosity Temperature Relation - Slope m
    ISO 1628-4:1999 Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 4: Polycarbonate (PC) moulding and extrusion materials
    BS 2782-7 Method 732A:1991 Methods of testing plastics. Rheological properties Determination of viscosity number:general conditions
    BS 2782-7 Method 732E:1991 Methods of testing plastics. Rheological properties Determination of viscosity number of poly(alkylene terephthalates)
    DIN EN ISO 1628-5:2015-05 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 5: Thermoplastic polyester (TP) homopolymers and copolymers (ISO 1628-5:1998)
    13/30279896 DC : 0 BS ISO 8178-5 - RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 5: TEST FUELS
    BS 2782-7:Method 732F:1991 Methods of testing plastics. Rheological properties Determination of viscosity number of methyl methacrylate polymers
    18/30335365 DC : 0 BS EN ISO 307 - PLASTICS - POLYAMIDES - DETERMINATION OF VISCOSITY NUMBER
    UNE-EN ISO 1628-5:2015 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 5: Thermoplastic polyester (TP) homopolymers and copolymers (ISO 1628-5:1998)
    I.S. EN ISO 10555-1:2013 INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 1: GENERAL REQUIREMENTS (ISO 10555-1:2013/AMD 1:2017)
    01/121388 DC : DRAFT MARCH 2001 ISO 307 PLASTICS - POLYAMIDES - DETERMINATION OF VISCOSITY NUMBER
    NF ISO 11158 : 2009 LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY H (HYDRAULIC SYSTEMS) - SPECIFICATIONS FOR CATEGORIES HH, HL, HM, HV AND HG
    UNI EN ISO 307 : 2013 PLASTICS - POLYAMIDES - DETERMINATION OF VISCOSITY NUMBER
    CAN/CSA-Z5100-17 Cellulose nanomaterials - Test methods for characterization
    ONORM EN ISO 307 : 2013 PLASTICS - POLYAMIDES - DETERMINATION OF VISCOSITY NUMBER (ISO 307:2007 + AMD 1:2013)
    I.S. EN ISO 1628-5:2015 PLASTICS - DETERMINATION OF THE VISCOSITY OF POLYMERS IN DILUTE SOLUTION USING CAPILLARY VISCOMETERS - PART 5: THERMOPLASTIC POLYESTER (TP) HOMOPOLYMERS AND COPOLYMERS (ISO 1628-5:1998)
    PREN 1825-1 : DRAFT 1995 INSTALLATIONS FOR SEPARATION OF GREASE - PRINCIPLES OF DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL
    BS EN ISO 3104:1996 Methods of test for petroleum and its products. Petroleum products. Transparent and opaque liquids. Determination of kinematic viscosity and calculation of dynamic viscosity
    BS ISO 8178-5:2008 Reciprocating internal combustion engines. Exhaust emission measurement Test fuels
    UNE-ISO 1628-4:2013 Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 4: Polycarbonate (PC) moulding and extrusion materials
    EN ISO 3104:1996 Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:1994)
    ASTM D 3089 : 1997 : R2008 Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes
    ASTM D 446 : 2012 Standard Specifications and Operating Instructions for Glass Capillary Kinematic Viscometers
    ASTM D 7044 : 2015 : REDLINE Standard Specification for Biodegradable Fire Resistant Hydraulic Fluids
    UNE-EN 16245-2:2014 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers
    EN 10310:2003 Steel tubes and fittings for onshore and offshore pipelines - Internal and external polyamide powder based coatings
    DIN EN 12092:2002-02 ADHESIVES - DETERMINATION OF VISCOSITY
    EN ISO 1628-1:2009/A1:2012 PLASTICS - DETERMINATION OF THE VISCOSITY OF POLYMERS IN DILUTE SOLUTION USING CAPILLARY VISCOMETERS - PART 1: GENERAL PRINCIPLES (ISO 1628-1:2009/AMD 1:2012)
    I.S. EN 1860-3:2003 APPLIANCES, SOLID FUELS AND FIRELIGHTERS FOR BARBECUEING - PART 3: FIRELIGHTERS FOR IGNITING SOLID FUELS FOR USE IN BARBECUE APPLIANCES - REQUIREMENTS AND TEST METHODS
    ONORM EN 1860-3 : 2006 APPLIANCES, SOLID FUELS AND FIRELIGHTERS FOR BARBECUING - PART 3: FIRELIGHTERS FOR IGNITING SOLID FUELS FOR USE IN BARBECUE - REQUIREMENTS AND TEST METHODS
    BS ISO 26422:2014 Petroleum and related products. Determination of shear stability of lubricating oils containing polymers. Method using a tapered roller bearing
    I.S. EN 14213:2003 HEATING FUELS - FATTY ACID METHYL ESTERS (FAME) - REQUIREMENTS AND TEST METHODS
    11/30239977 DC : 0 BS EN 16245-2 - FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: ADDITIONAL REQUIREMENTS FOR RESINS, CURING SYSTEMS, ADDITIVES AND MODIFIERS
    DIN EN 16245-2:2013-08 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers
    DIN EN ISO 307 E : 2013 PLASTICS - POLYAMIDES - DETERMINATION OF VISCOSITY NUMBER (ISO 307:2007 + AMD 1:2013)
    17/30366325 DC : 0 BS EN ISO 3104 - PETROLEUM PRODUCTS - TRANSPARENT AND OPAQUE LIQUIDS - DETERMINATION OF KINEMATIC VISCOSITY AND CALCULATION OF DYNAMIC VISCOSITY
    UNI EN ISO 1628-1 : 2012 PLASTICS - DETERMINATION OF THE VISCOSITY OF POLYMERS IN DILUTE SOLUTION USING CAPILLARY VISCOMETERS - PART 1: GENERAL PRINCIPLES
    DIN EN ISO 1628-5 E : 2015 PLASTICS - DETERMINATION OF THE VISCOSITY OF POLYMERS IN DILUTE SOLUTION USING CAPILLARY VISCOMETERS - PART 5: THERMOPLASTIC POLYESTER (TP) HOMOPOLYMERS AND COPOLYMERS (ISO 1628-5:1998)
    BS EN ISO 10555-1 : 2013 INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 1: GENERAL REQUIREMENTS
    EN ISO 307:2007/A1:2013 PLASTICS - POLYAMIDES - DETERMINATION OF VISCOSITY NUMBER (ISO 307:2007/AMD 1:2013)
    DIN EN ISO 1628-3:2010-10 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 3: Polyethylenes and polypropylenes (ISO 1628-3:2010)
    DIN EN 1860-3:2003-12 Appliances, solid fuels and firelighters for barbecuing - Part 3: Firelighters for igniting solid fuels for use in barbecue appliances; Requirements and test methods; German version EN 1860-3:2003
    ISO 9371:1990 Plastics Phenolic resins in the liquid state or in solution Determination of viscosity
    BS EN ISO 9371:1995 Plastics. Phenolic resins in the liquid state or in solution. Determination of viscosity
    BS EN ISO 9665:2000 Adhesives. Animal glues. Methods of sampling and testing (ISO 9665:1998)
    I.S. EN ISO 8178-5:1998 RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 5: TEST FUELS
    I.S. EN ISO 1628-1:2009 PLASTICS - DETERMINATION OF THE VISCOSITY OF POLYMERS IN DILUTE SOLUTION USING CAPILLARY VISCOMETERS - PART 1: GENERAL PRINCIPLES (ISO 1628-1:2009)
    I.S. EN ISO 9665:2000 ADHESIVES - ANIMAL GLUES - METHODS FOR SAMPLING AND TESTING
    I.S. EN ISO 1628-3:2010 PLASTICS - DETERMINATION OF THE VISCOSITY OF POLYMERS IN DILUTE SOLUTION USING CAPILLARY VISCOMETERS - PART 3: POLYETHYLENES AND POLYPROPYLENES
    DIN EN 61868 : 1999 MINERAL INSULATING OILS - DETERMINATION OF KINEMATIC VISCOSITY AT VERY LOW TEMPERATURES
    BS 2782-7.732E(1998) : 1998 PLASTICS - DETERMINATION OF THE VISCOSITY OF POLYMERS IN DILUTE SOLUTION USING CAPILLARY VISCOMETERS - THERMOPLASTIC POLYESTER (TP) HOMOPOLYMERS AND COPOLYMERS
    BS 2782-7.732A(1998) : 1998 PLASTICS - DETERMINATION OF THE VISCOSITY OF POLYMERS IN DILUTE SOLUTION USING CAPILLARY VISCOMETERS - GENERAL PRINCIPLES
    BS 2782-7.733A(1996) : 1996 AMD 9928 METHODS OF TESTING PLASTICS - RHEOLOGICAL PROPERTIES - DETERMINATION OF VISCOSITY NUMBER OF POLYAMIDES
    BS 2782-7:Method 732D:1999 Methods of testing plastics. Rheological properties Determination of the viscosity of polycarbonate (PC) moulding and extrusion materials in dilute solution using capillary viscometers - Method 732D: Determination of the viscosity of polycarbonate (PC) moulding and extrusion materials in dilute solution using capillary viscometers
    VDE 0370-15 : 1999 MINERAL INSULATING OILS - DETERMINATION OF KINEMATIC VISCOSITY AT VERY LOW TEMPERATURES
    BS 5377-2:1990 Assessment of laundering effects by means of a cotton control cloth Methods of analysis and test for the unsoiled cotton control cloth
    11/30124825 DC : 0 BS 7993 - TWIN FERRULE CONNECTORS AND ASSOCIATED TUBING FOR 316 STAINLESS STEEL SYSTEMS - SPECIFICATION AND TEST METHODS
    UNE EN ISO 307 : 2007 PLASTICS - POLYAMIDES - DETERMINATION OF VISCOSITY NUMBER (ISO 307:2007/AMD 1:2013)
    BS 2782-7.732C(1991) : 1991 AMD 10831 METHODS OF TESTING PLASTICS - RHEOLOGICAL PROPERTIES - DETERMINATION OF VISCOSITY NUMBER OF POLYETHYLENES AND POLYPROPYLENES
    05/30130718 DC : DRAFT MAR 2005 EN ISO 307 - PLASTICS - POLYAMIDES - DETERMINATION OF VISCOSITY NUMBER
    09/30196499 DC : 0 BS ISO 26422 - PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF SHEAR STABILITY OF LUBRICATING OILS CONTAINING POLYMERS - METHOD USING A TAPERED ROLLER BEARING
    BS EN ISO 1628-5:2015 Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometers Thermoplastic polyester (TP) homopolymers and copolymers
    BS 2782-7 Method 733A:1991 Methods of testing plastics. Rheological properties Determination of viscosity number of polyamides
    14/30290161 DC : 0 BS ISO 26422 - PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF SHEAR STABILITY OF LUBRICATING OILS CONTAINING POLYMERS - METHOD USING A TAPERED ROLLER BEARING
    95/101288 DC : DRAFT FEB 1995 PREN 1825-1 - INSTALLATIONS FOR SEPARATION OF GREASE - PART 1: PRINCIPLES OF DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL
    BS 2000-71(1990) : 1990 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - KINEMATIC VISCOSITY OF TRANSPARENT AND OPAQUE LIQUIDS AND CALCULATION OF DYNAMIC VISCOSITY
    IP 71 : 1995 SECTION 1: PETROLEUM PRODUCTS - TRANSPARENT AND OPAQUE LIQUIDS - DETERMINATION OF KINEMATIC VISCOSITY AND CALCULATION OF DYNAMIC VISCOSITY - SECTION 2: GLASS CAPILLARY KINEMATIC VISCOMETERS - SPECIFICATIONS AND OPERATING INSTRUCTIONS (TWO PART SET)
    I.S. EN 16245-2:2013 FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: SPECIFIC REQUIREMENTS FOR RESIN, CURING SYSTEMS, ADDITIVES AND MODIFIERS
    EN ISO 10555-1:2013/A1:2017 INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 1: GENERAL REQUIREMENTS (ISO 10555-1:2013/AMD 1:2017)
    BS EN ISO 307 : 2007 PLASTICS - POLYAMIDES - DETERMINATION OF VISCOSITY NUMBER
    ISO 26422:2014 Petroleum and related products Determination of shear stability of lubricating oils containing polymers Method using a tapered roller bearing
    ISO 8178-5:2015 Reciprocating internal combustion engines Exhaust emission measurement Part 5: Test fuels
    ISO 307:2007 Plastics Polyamides Determination of viscosity number
    I.S. EN 60450:2004 MEASUREMENT OF THE AVERAGE VISCOMETRIC DEGREE OF POLYMERIZATION OF NEW AND AGED CELLULOSIC ELECTRICALLY INSULATING MATERIALS
    ISO 4312:1989 Surface active agents — Evaluation of certain effects of laundering — Methods of analysis and test for unsoiled cotton control cloth
    DIN EN ISO 1628-1:2012-10 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometer - Part 1: General principles (ISO 1628-1:2009 + Amd 1:2012); German version EN ISO 1628-1:2009 + A1:2012
    BS EN 10310:2003 Steel tubes and fittings for onshore and offshore pipelines. Internal and external polyamide powder based coatings
    EN ISO 8178-5 : 1997 RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - TEST FUELS
    EN 16245-2:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers
    UNI EN 16245-2 : 2013 FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: SPECIFIC REQUIREMENTS FOR RESIN, CURING SYSTEMS, ADDITIVES AND MODIFIERS
    UNI EN ISO 1628-3 : 2010 PLASTICS - DETERMINATION OF THE VISCOSITY OF POLYMERS IN DILUTE SOLUTION USING CAPILLARY VISCOMETERS - PART 3: POLYETHYLENES AND POLYPROPYLENES
    DIN EN ISO 307:2013-08 PLASTICS - POLYAMIDES - DETERMINATION OF VISCOSITY NUMBER (ISO 307:2007 + AMD 1:2013)
    17/30319067 DC : 0 BS ISO 18747-1 - DETERMINATION OF PARTICLE DENSITY BY SEDIMENTATION METHODS - PART 1: ISOPYCNIC INTERPOLATION APPROACH
    BS EN 16245-2:2013 Fibre-reinforced plastic composites. Declaration of raw material characteristics Specific requirements for resin, curing systems, additives and modifiers
    UNE-EN 10310:2011 Steel tubes and fittings for onshore and offshore pipelines - Internal and external polyamide powder based coatings
    BS EN 61868:1999 Mineral insulating oils. Determination of kinematic viscosity at very low temperatures
    BS 3900-A7.2(2003) : 2003 AMD 16864 METHODS OF TEST FOR PAINTS - GROUP A: TESTS ON LIQUID PAINTS (EXCLUDING CHEMICAL TESTS) - PART A7: DETERMINATION OF THE VISCOSITY OF PAINT AT A HIGH RATE OF SHEAR - SECTION A7-2: DISC OR BALL VISCOMETER OPERATED AT A SPECIFIED SPEED
    BS 2782-7:Method 732B:1991 Methods of testing plastics. Rheological properties Determination of viscosity number of poly(vinyl chloride) resins
    NF EN 60450 : 2004 AMD 1 2007 MEASUREMENT OF THE AVERAGE VISCOMETRIC DEGREE OF POLYMERIZATION OF NEW AND AGED CELLULOSIC ELECTRICALLY INSULATING MATERIALS
    DEFSTAN 91-43/2(1993) : 1993 LUBRICATING OIL, ENGINE: GRADE 50 NATO CODE NO. 0-182 JOINT SERVICE DESIGNATION: OMD-330
    BS 2782-7 Method 730A:1979 Methods of testing plastics. Rheological properties Determination of reduced viscosity (viscosity number) and intrinsic viscosity of plastics in dilute solution
    I.S. EN ISO 307:2007 PLASTICS - POLYAMIDES - DETERMINATION OF VISCOSITY NUMBER (ISO 307:2007)
    BIS IS 16084 : 2013 MINERAL INSULATING OILS - DETERMINATION OF KINEMATIC VISCOSITY AT VERY LOW TEMPERATURES
    ISO 11158:2009 Lubricants, industrial oils and related products (class L) — Family H (hydraulic systems) — Specifications for categories HH, HL, HM, HV and HG
    ISO 1628-5:1998 Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 5: Thermoplastic polyester (TP) homopolymers and copolymers
    ISO 2884-2:2003 Paints and varnishes — Determination of viscosity using rotary viscometers — Part 2: Disc or ball viscometer operated at a specified speed
    BS EN 14213:2003 Heating fuels. Fatty acid methyl esters (FAME). Requirements and test methods
    IEC 61868:1998 Mineral insulating oils - Determination of kinematic viscosity at very low temperatures
    BS EN ISO 1628-2:2000 Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometers Poly(vinyl chloride) resins
    BS EN ISO 1628-1 : 2009 PLASTICS - DETERMINATION OF THE VISCOSITY OF POLYMERS IN DILUTE SOLUTION USING CAPILLARY VISCOMETERS - PART 1: GENERAL PRINCIPLES (ISO 1628-1:2009)
    ISO 9665:1998 Adhesives Animal glues Methods of sampling and testing
    ISO 1628-1:2009 Plastics Determination of the viscosity of polymers in dilute solution using capillary viscometers Part 1: General principles
    BS EN ISO 8178-5:1997 Reciprocating internal combustion engines. Exhaust emission measurement Test fuels
    BS EN ISO 2884-2:2006 Paints and varnishes. Determination of viscosity using rotary viscometers Disc or ball viscometer operated at a specified speed
    EN 14213:2003/AC:2003 HEATING FUELS - FATTY ACID METHYL ESTERS (FAME) - REQUIREMENTS AND TEST METHODS
    EN ISO 9665 : 2000 ADHESIVES - ANIMAL GLUES - METHODS FOR SAMPLING AND TESTING
    EN 12092:2001 Adhesives - Determination of viscosity
    EN ISO 1628-5:2015 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 5: Thermoplastic polyester (TP) homopolymers and copolymers (ISO 1628-5:1998)
    EN 1860-3:2003/A1:2006 APPLIANCES, SOLID FUELS AND FIRELIGHTERS FOR BARBECUEING - PART 3: FIRELIGHTERS FOR IGNITING SOLID FUELS FOR USE IN BARBECUE APPLIANCES - REQUIREMENTS AND TEST METHODS
    EN ISO 2884-2:2006 Paints and varnishes - Determination of viscosity using rotary viscometers - Part 2: Disc or ball viscometer operated at a specified speed (ISO 2884-2:2003)
    EN ISO 9371 : 1995 PLASTICS - PHENOLIC RESINS IN THE LIQUID STATE OR IN SOLUTION - DETERMINATION OF VISCOSITY
    UNE-ISO 1628-6:2013 Plastics -- Determination of viscosity number and limiting viscosity number -- Part 6: Methyl methacrylate polymers
    BS EN 60450:2004 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials
    BS ISO 11158:2009 Lubricants, industrial oils and related products (class L). Family H (hydraulic systems). Specifications for categories HH, HL, HM, HV and HG
    BS 2782-7.734 A TO D(1995) : 1995 METHODS OF TESTING PLASTICS - RHEOLOGICAL PROPERTIES - PLASTICS - PHENOLIC RESINS THE LIQUID STATE OR IN SOLUTION - DETERMINATION OF VISCOSITY
    BS 7993:2011 Twin ferrule connectors and associated tubing for 316 stainless steel systems. Specification and test methods
    UNE-ISO 1628-5:2013 Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 5: Thermoplastic polyester (TP) homopolymers and copolymers
    08/30152069 DC : DRAFT SEP 2008 BS EN ISO 1628-3 - PLASTICS - DETERMINATION OF THE VISCOSITY OF POLYMERS IN DILUTE SOLUTION USING CAPILLARY VISCOMETERS - PART 3: POLYETHYLENES AND POLYPROPYLENES
    BS 2782-7 Method 732D:1991 Methods of testing plastics. Rheological properties Determination of viscosity number of polycarbonate moulding and extrusion materials
    CSA Z5100/Z5200 PACKAGE : 2017 CONSISTS OF Z5100-17, CELLULOSE NANOMATERIALS - TEST METHODS FOR CHARACTERIZATION AND Z5200-17, CELLULOSE NANOMATERIALS - BLANK DETAIL SPECIFICATION
    CEI EN 61868 : 1999 MINERAL INSULATING OILS - DETERMINATION OF KINEMATIC VISCOSITY AT VERY LOW TEMPERATURES
    IP PM EJ : 2014 DETERMINATION OF KINEMATIC VISCOSITY OF AVIATION TURBINE FUELS - MANUAL AND AUTOMATED METHOD
    ISO 10555-1:2013 Intravascular catheters — Sterile and single-use catheters — Part 1: General requirements
    ISO 18747-1:2018 Determination of particle density by sedimentation methods — Part 1: Isopycnic interpolation approach
    BS ISO 1628-5 : 1998 RHEOLOGICAL PROPERTIES - PLASTICS - DETERMINATION OF THE VISCOSITY OF POLYMERS IN DILUTE SOLUTION USING CAPILLARY VISCOMETERS - THERMOPLASTIC POLYESTER (TP) HOMOPOLYMERS AND COPOLYMERS
    ASTM D 446 : 2012 : R2017 Standard Specifications and Operating Instructions for Glass Capillary Kinematic Viscometers
    DIN EN 14213 E : 2003 HEATING FUELS - FATTY ACID METHYL ESTERS (FAME) - REQUIREMENTS AND TEST METHODS
    ISO 1628-2:1998 Plastics Determination of the viscosity of polymers in dilute solution using capillary viscometers Part 2: Poly(vinyl chloride) resins
    BS EN 1860-3:2003 Appliances, solid fuels and firelighters for barbecueing Firelighters for igniting solid fuels for use in barbecue appliances. Requirements and test methods
    BS EN 12092:2001 Adhesives. Determination of viscosity
    BS EN ISO 1628-3:2010 Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometers Polyethylenes and polypropylenes
    ISO 1628-3:2010 Plastics Determination of the viscosity of polymers in dilute solution using capillary viscometers Part 3: Polyethylenes and polypropylenes
    IEC 60450:2004+AMD1:2007 CSV Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials
    DIN EN 10310:2004-07 Steel tubes and fittings for onshore and offshore pipelines - Internal and external polyamide powder based coatings
    DIN EN 14213:2003-11 HEATING FUELS - FATTY ACID METHYL ESTERS (FAME) - REQUIREMENTS AND TEST METHODS
    UNE-EN ISO 307:2007 Plastics - Polyamides - Determination of viscosity number (ISO 307:2007)
    EN 61868:1999 Mineral insulating oils - Determination of kinematic viscosity at very low temperatures
    EN 60450:2004/A1:2007 MEASUREMENT OF THE AVERAGE VISCOMETRIC DEGREE OF POLYMERIZATION OF NEW AND AGED CELLULOSIC ELECTRICALLY INSULATING MATERIALS
    BS 647:1993 Adhesives methods for samplig and testing animal glues
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective