91/48084 DC : DRAFT NOV 1991
|
ISO/DIS 4952 - STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE |
BS ISO 8535-1:2016
|
Diesel engines. Steel tubes for high-pressure fuel injection pipes Requirements for seamless cold-drawn single-wall tubes |
IEC 60404-8-11:2018
|
Magnetic materials - Part 8-11: Specifications for individual materials - Fe-based amorphous strip delivered in the semi-processed state |
BS ISO 5832-1:2007
|
Implants for surgery. Metallic materials Wrought stainless steel |
CEI EN 60404-8-6 : 2009
|
MAGNETIC MATERIALS - PART 8-6: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SOFT MAGNETIC METALLIC MATERIALS |
04/30094090 DC : DRAFT MAR 2004
|
IEC 60404-8-3 ED.3 - MAGNETIC MATERIALS - PART 8-3: SPECIFICATIONS OF INDIVIDUAL MATERIALS - COLD-ROLLED ELECTRICAL ALLOYED AND NON-ALLOYED STEEL SHEET AND STRIP DELIVERED IN THE SEMI PROCESSED STATE |
15/30287641 DC : 0
|
BS EN ISO 16120-1 - NON-ALLOY STEEL WIRE ROD FOR CONVERSION TO WIRE - PART 1: GENERAL REQUIREMENTS |
NES 848 PT1 : ISSUE 1
|
REQUIREMENTS FOR CARBON MANGANESE AND LOW ALLOY STEEL FORGINGS - CARBON MANGANESE STEEL FORGINGS |
ISO 11949:2016
|
Cold-reduced tinmill products Electrolytic tinplate |
12/30250149 DC : 0
|
BS ISO 16143-2 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 2: SEMI-FINISHED PRODUCTS, BARS, RODS AND SECTIONS |
13/30275387 DC : 0
|
BS ISO 20332 - CRANES - PROOF OF COMPETENCE OF STEEL STRUCTURES |
API 5L REDLINE : 2007
|
SPECIFICATION FOR LINE PIPE |
00/709299 DC : DRAFT JUNE 2000
|
ISO 8535-2:1993 (REVISION) - COMPRESSION IGNITION ENGINES - STEEL TUBES FOR HIGH PRESSURE FUEL INJECTION PIPES - PART 2: REQUIREMENTS FOR COMPOSITE TUBES |
09/30196508 DC : 0
|
BS ISO 9328-1 - STEEL FLAT PRODUCTS FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL REQUIREMENTS |
15/30310217 DC : 0
|
BS ISO 5832-1 - IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 1: WROUGHT STAINLESS STEEL |
13/30279057 DC : 0
|
BS ISO 683-4 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 4: FREE-CUTTING STEELS |
BS ISO 10474:2013
|
Steel and steel products. Inspection documents |
ISO 6935-1:2007
|
Steel for the reinforcement of concrete Part 1: Plain bars |
BS ISO 8535-2:2003
|
Compression ignition engines. Steel tubes for high pressure fuel injection pipes Requirements for composite tubes |
ISO 23717:2006
|
Steel wire and wire products Hose reinforcement wire |
ISO 9330-6:1997
|
Welded steel tubes for pressure purposes — Technical delivery conditions — Part 6: Longitudinally welded austenitic stainless steel tubes |
11/30191086 DC : 0
|
BS ISO 12633-1 - HOT-FINISHED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS |
15/30316161 DC : 0
|
BS ISO 6931-1 - STAINLESS STEELS FOR SPRINGS - PART 1: WIRE |
BS 7252-1:1990
|
Metallic materials for surgical implants Specification for wrought stainless steel |
04/30116142 DC : DRAFT JUL 2004
|
ISO 4952 - STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE |
02/713148 DC : DRAFT NOV 2002
|
BS ISO 16143-2 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 2: SEMI-FINISHED PRODUCTS, BARS, RODS AND SECTIONS |
06/30159843 DC : 0
|
BS ISO 13680 - PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION - RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS |
04/30069217 DC : DRAFT FEB 2004
|
ISO 16143-3 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 3: WIRE |
05/30129061 DC : DRAFT FEB 2005
|
ISO 7900 - STEEL WIRE AND WIRE PRODUCTS FOR FENCES - ZINC AND ZINC-ALLOY COATED STEEL BARBED WIRE |
05/30136183 DC : DRAFT JUL 2005
|
IEC 60404-8-7 - MAGNETIC MATERIALS - PART 8-7: SPECIFICATION OF INDIVIDUAL MATERIALS - COLD-ROLLED GRAIN-ORIENTED ELECTRICAL STEEL SHEET AND STRIP DELIVERED IN THE FULLY-PROCESSED STATE |
PREN 10208-3 : DRAFT 1997
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 3: PIPES OF REQUIREMENT CLASS C |
ISO 4951-1:2001
|
High yield strength steel bars and sections — Part 1: General delivery requirements |
DIN EN ISO 3183:2013-03
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012) |
BIS IS/ISO 5832-9 : 2007
|
IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 9: WROUGHT HIGH NITROGEN STAINLESS STEEL |
ISO 683-1:2016
|
Heat-treatable steels, alloy steels and free-cutting steels Part 1: Non-alloy steels for quenching and tempering |
I.S. EN ISO 4957:2000
|
TOOL STEELS |
ISO/TR 15461:1997
|
Steel forgings Testing frequency, sampling conditions and test methods for mechanical tests |
ISO 9330-2:1997
|
Welded steel tubes for pressure purposes — Technical delivery conditions — Part 2: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified elevated temperature properties |
NES 848 PT2 : ISSUE 1
|
REQUIREMENTS FOR CARBON MANGANESE AND LOW ALLOY STEEL FORGINGS - LOW ALLOY STEEL FORGINGS |
ISO 11951:2016
|
Cold-reduced tinmill products Blackplate |
ISO 9328-1:2018
|
Steel flat products for pressure purposes — Technical delivery conditions — Part 1: General requirements |
EN ISO 3183:2012/A1:2018
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012) |
UNE-EN ISO 16120-1:2017
|
Non-alloy steel wire rod for conversion to wire - Part 1: General requirements (ISO 16120-1:2017) |
BS EN ISO 10807:1997
|
Pipework. Corrugated flexible metallic hose assemblies for the protection of electrical cables in explosive atmosphere |
EN ISO 16120-1:2017
|
NON-ALLOY STEEL WIRE ROD FOR CONVERSION TO WIRE - PART 1: GENERAL REQUIREMENTS (ISO 16120-1:2017) |
EN 60404-8-6:2017
|
Magnetic materials - Part 8-6: Specifications for individual materials - Soft magnetic metallic materials |
ISO 11950:2016
|
Cold-reduced tinmill products Electrolytic chromium/chromium oxide-coated steel |
11/30191093 DC : 0
|
BS ISO 10799-1 - COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS |
BS EN ISO 16120-3:2011
|
Non-alloy steel wire rod for conversion to wire Specific requirements for rimmed and rimmed substitute, low-carbon steel wire rod |
BIS IS/ISO 3183 : 2007
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
11/30230618 DC : 0
|
BS ISO 683-2 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 2: ALLOY STEELS FOR QUENCHING AND TEMPERING |
02/704957 DC : DRAFT NOV 2002
|
ISO 683-14 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 14: HOT-ROLLED STEELS FOR QUENCHED AND TEMPERED SPRINGS |
BS ISO 7900:2006
|
Steel wire and wire products for fences. Zinc- and zinc-alloy-coated steel barbed wire |
11/30203534 DC : DRAFT AUG 2011
|
BS ISO 13270 - STEEL FIBRES FOR CONCRETE - DEFINITIONS AND SPECIFICATIONS |
API 5L RUSSIAN : 2012
|
SPECIFICATION FOR LINE PIPE |
ISO/TS 7705:2017
|
Guidelines for specifying Charpy V-notch impact prescriptions in steel specifications |
15/30334742 DC : 0
|
BS EN 60404-8-8 ED 2.0 - MAGNETIC MATERIALS - PART 8-8: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - THIN ELECTRICAL STEEL STRIP AND SHEET FOR USE AT MEDIUM FREQUENCIES |
ISO 10544:1992
|
Cold-reduced steel wire for the reinforcement of concrete and the manufacture of welded fabric |
13/30252100 DC : 0
|
BS ISO 4990 - STEEL CASTINGS - GENERAL TECHNICAL DELIVERY REQUIREMENTS |
09/30169302 DC : 0
|
BS EN ISO 16120-1 - NON-ALLOY STEEL WIRE ROD FOR CONVERSION TO WIRE - PART 1: GENERAL REQUIREMENTS |
17/30339115 DC : 0
|
ISO/DIS 4978 - STEEL SHEET AND STRIP FOR WELDED GAS CYLINDERS |
API 5CRA : 2010 : INC : ERR 1 : 2011
|
SPECIFICATION FOR CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK |
ISO 683-14:2004
|
Heat-treatable steels, alloy steels and free-cutting steels — Part 14: Hot-rolled steels for quenched and tempered springs |
15/30248084 DC : 0
|
BS ISO 11949 - COLD-REDUCED TINMILL PRODUCTS - ELECTROLYTIC TINPLATE |
BS 7252-9:1990
|
Metallic materials for surgical implants Specification for high-nitrogen stainless steel |
BS ISO 16143-1:2014
|
Stainless steels for general purposes Corrosion-resistant flat products |
13/30247437 DC : 0
|
BS EN ISO 683-17 - HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS (ISO/DIS 683-17:2013) |
08/30161340 DC : DRAFT FEB 2008
|
BS EN 60404-8-10 - MAGNETIC MATERIALS - PART 8: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SECTION 10: SPECIFICATIONS FOR MAGNETIC MATERIALS (IRON AND STEEL) FOR USE IN RELAYS |
ISO 9330-4:2000
|
Welded steel tubes for pressure purposes — Technical delivery conditions — Part 4: Submerged arc-welded unalloyed and alloyed steel tubes with specified elevated temperature properties |
I.S. EN ISO 3183:2012
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012) |
BS ISO 7989-1:2006
|
Steel wire and wire products. Non-ferrous metallic coatings on steel wire General principles |
05/30091555 DC : DRAFT MAY 2005
|
ISO 3183 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
UNE-EN ISO 16120-3:2012
|
Non-alloy steel wire rod for conversion to wire - Part 3: Specific requirements for rimmed and rimmed substitute, low-carbon steel wire rod (ISO 16120-3:2011) |
ISO 630-1:2011
|
Structural steels Part 1: General technical delivery conditions for hot-rolled products |
ISO 4950-1:1995
|
High yield strength flat steel products — Part 1: General requirements |
UNI EN ISO 16120-3 : 2011
|
NON-ALLOY STEEL WIRE ROD FOR CONVERSION TO WIRE - PART 3: SPECIFIC REQUIREMENTS FOR RIMMED AND RIMMED SUBSTITUTE, LOW-CARBON STEEL WIRE ROD |
IEC 60404-8-4:2013
|
Magnetic materials - Part 8-4: Specifications for individual materials - Cold-rolled non-oriented electrical steel strip and sheet delivered in the fully-processed state |
BS ISO 20332:2016
|
Cranes. Proof of competence of steel structures |
IEC 60404-8-2:1998
|
Magnetic materials - Part 8-2: Specifications for individual materials - Cold-rolled electrical alloyed steel sheet and strip delivered in the semi-processed state |
ISO 6931-2:2005
|
Stainless steels for springs Part 2: Narrow strip |
I.S. EN ISO 16120-3:2011
|
NON-ALLOY STEEL WIRE ROD FOR CONVERSION TO WIRE - PART 3: SPECIFIC REQUIREMENTS FOR RIMMED AND RIMMED SUBSTITUTE, LOW-CARBON STEEL WIRE ROD |
PREN ISO 683-17 : DRAFT 2013
|
HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS (ISO/DIS 683-17:2013) |
ISO 3183:2012
|
Petroleum and natural gas industries Steel pipe for pipeline transportation systems |
ISO 2604-5:1978
|
Steel products for pressure purposes Quality requirements Part 5: Longitudinally welded austenitic stainless steel tubes |
ISO 16143-1:2014
|
Stainless steels for general purposes Part 1: Corrosion-resistant flat products |
ISO 630:1995
|
Structural steels Plates, wide flats, bars, sections and profiles |
IEC 60404-8-10:2009
|
Magnetic materials - Part 8-10: Specifications for individual materials - Magnetic materials (iron and steel) for use in relays |
ISO 13270:2013
|
Steel fibres for concrete — Definitions and specifications |
ISO 7778:2014
|
Through-thickness characteristics for steel products |
ISO 559:1991
|
Steel tubes for water and sewage |
ISO 683-13:1974
|
Heat-treated steels, alloy steels and free-cutting steels Part 13: Wrought stainless steels |
ISO 4954:1993
|
Steels for cold heading and cold extruding |
ISO 16020:2005
|
Steel for the reinforcement and prestressing of concrete Vocabulary |
I.S. EN ISO 683-17:2014
|
HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS (ISO 683-17:2014) |
DIN ISO 5832-9:2008-12
|
IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 9: WROUGHT HIGH NITROGEN STAINLESS STEEL |
BS 7252-1:1997
|
Metallic materials for surgical implants Specification for wrought stainless steel |
BS 6362:1990
|
Specification for stainless steel tubes suitable for screwing in accordance with BS 21 \'Pipe threads for tubes and fittings where pressure-tight joints are made on the threads\' |
BS 7252-9:1993
|
Metallic materials for surgical implants Specification for high-nitrogen stainless steel |
12/30244860 DC : 0
|
BS ISO 10474 - METALLIC PRODUCTS - INSPECTION DOCUMENTS |
05/30092093 DC : DRAFT JUL 2005
|
ISO 24314 - STRUCTURAL STEELS - STEELS FOR SEISMIC IMPROVED RESISTANCE FOR BUILDING |
API 5CRA : 2010 : INC : ERR 1 : 2011 : R2015
|
SPECIFICATION FOR CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK |
15/30296029 DC : 0
|
BS ISO 4955 - HEAT-RESISTANT STEELS |
BS 6404-8.4(1986) : 1986
|
MAGNETIC MATERIALS - INDIVIDUAL MATERIALS - SPECIFICATION FOR COLD ROLLED NON ORIENTED MAGNETIC STEEL SHEET AND STRIP DELIVERED IN THE FINALLY ANNEALED STATE |
11/30197571 DC : 0
|
BS ISO 25832-1 - IMPLANTS FOR SURGERY - SEAMLESS TUBES FOR SURGICAL IMPLANTS - PART 1: MATERIALS BASED ON IRON |
11/30235499 DC : 0
|
BS EN ISO 3183 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
BS ISO 16143-3:2014
|
Stainless steels for general purposes Wire |
IEC 60404-8-8:2017
|
Magnetic materials - Part 8-8: Specifications for individual materials - Thin electrical steel strip and sheet for use at medium frequencies |
ISO 2604-6:1978
|
Steel products for pressure purposes Quality requirements Part 6: Submerged arc longitudinally or spirally welded steel tubes |
12/30250152 DC : 0
|
BS ISO 16143-3 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 3: WIRE |
14/30295082 DC : 0
|
BS ISO 683-3 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 3: CASE HARDENING STEELS |
BS ISO 4990:2015
|
Steel castings. General technical delivery requirements |
17/30347225 DC : 0
|
BS EN ISO 9443 - SURFACE QUALITY CLASSES FOR HOT-ROLLED ROUND BARS AND WIRE ROD |
BS ISO 13270:2013
|
Steel fibres for concrete. Definitions and specifications |
04/30110587 DC : DRAFT MARCH 2004
|
ISO 23717 - STEEL WIRE AND WIRE PRODUCTS - HOSE REINFORCEMENT WIRE |
ISO 8535-1:2016
|
Diesel engines Steel tubes for high-pressure fuel injection pipes Part 1: Requirements for seamless cold-drawn single-wall tubes |
16/30338711 DC : 0
|
BS IEC 60404-8-6 ED 3.0 - MAGNETIC MATERIALS - PART 8-6: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SOFT MAGNETIC METALLIC MATERIALS |
11/30230615 DC : 0
|
BS ISO 683-1 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 1: NON-ALLOY STEELS FOR QUENCHING AND TEMPERING |
17/30312468 DC : 0
|
BS ISO 15461 - STEEL FORGINGS - TESTING FREQUENCY, SAMPLING CONDITIONS AND TEST METHODS FOR MECHANICAL TESTS |
NF EN ISO 16120-1 : 2017
|
NON-ALLOY STEEL WIRE ROD FOR CONVERSION TO WIRE - PART 1: GENERAL REQUIREMENTS |
06/30099306 DC : DRAFT JUN 2006
|
BS ISO 5832-9 - IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 9: WROUGHT HIGH NITROGEN STAINLESS STEEL |
BS ISO 14661:2000
|
Thermal turbines for industrial applications (steam turbines, gas expansion turbines). General requirements |
12/30261766 DC : 0
|
BS EN 60404-8-4 - MAGNETIC MATERIALS - PART 8-4: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - COLD-ROLLED NON-ORIENTED ELECTRICAL STEEL STRIP AND SHEET DELIVERED IN THE FULLY-PROCESSED STATE |
API 5L CHINESE : 2012
|
SPECIFICATION FOR LINE PIPE |
BS EN ISO 16120-1:2017
|
Non-alloy steel wire rod for conversion to wire General requirements |
NF ISO 5832-9 : 2007
|
IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 9: WROUGHT HIGH NITROGEN STAINLESS STEEL |
ISO 15461:2018
|
Steel forgings — Testing frequency, sampling conditions and test methods for mechanical tests |
NF EN ISO 16120-3 : 2011
|
NON-ALLOY STEEL WIRE ROD FOR CONVERSION TO WIRE - PART 3: SPECIFIC REQUIREMENTS FOR RIMMED AND RIMMED SUBSTITUTE, LOW CARBON STEEL WIRE ROD |
ISO 9329-4:1997
|
Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 4: Austenitic stainless steels |
NF EN ISO 4957 : 2000
|
TOOL STEELS |
ISO 4951-2:2001
|
High yield strength steel bars and sections — Part 2: Delivery conditions for normalized, normalized rolled and as-rolled steels |
ISO 4952:2006
|
Structural steels with improved atmospheric corrosion resistance |
ISO 1052:1982
|
Steels for general engineering purposes |
ISO 9330-1:1990
|
Welded steel tubes for pressure purposes — Technical delivery conditions — Part 1: Unalloyed steel tubes with specified room temperature properties |
ISO 9329-3:1997
|
Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 3: Unalloyed and alloyed steels with specified low temperature properties |
ISO 3183-1:1996
|
Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 1: Pipes of requirement class A |
ISO 6930-1:2001
|
High yield strength steel plates and wide flats for cold forming Part 1: Delivery conditions for thermomechanically-rolled steels |
ISO 5832-1:2016
|
Implants for surgery Metallic materials Part 1: Wrought stainless steel |
ISO 9329-1:1989
|
Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 1: Unalloyed steels with specified room temperature properties |
ISO 7900:2006
|
Steel wire and wire products for fences Zinc- and zinc-alloy-coated steel barbed wire |
ISO 9330-3:1997
|
Welded steel tubes for pressure purposes — Technical delivery conditions — Part 3: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified low temperature properties |
IEC 60404-8-5:1989
|
Magnetic materials. Part 8: Specifications for individual materials. Section Five: Specification for steel sheet and strip with specified mechanical properties and magnetic permeability |
ISO 3183-3:1999
|
Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 3: Pipes of requirement class C |
ISO 6931-1:2016
|
Stainless steels for springs Part 1: Wire |
ISO 14661:2000
|
Thermal turbines for industrial applications (steam turbines, gas expansion turbines) General requirements |
ISO 683-16:1976
|
Heat-treated steels, alloy steels and free-cutting steels — Part 16: Precipitation hardening stainless steels |
ISO 5832-9:2007
|
Implants for surgery Metallic materials Part 9: Wrought high nitrogen stainless steel |
DIN EN ISO 683-17:2015-02
|
Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2014) |
ONORM EN ISO 13680 : 2010
|
PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS |
UNI EN ISO 13680 : 2010
|
PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS |
EN ISO 13680:2010
|
Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions (ISO 13680:2010) |
UNI EN ISO 683-17 : 2014
|
HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS |
ISO 24314:2006
|
Structural steels Structural steels for building with improved seismic resistance Technical delivery conditions |
16/30347251 DC : 0
|
BS EN 60404-8-11 ED 1.0 - MAGNETIC MATERIALS - PART 8-11: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - FE-BASED AMORPHOUS STRIP DELIVERED IN THE SEMI-PROCESSED STATE |
ISO 20332:2016
|
Cranes Proof of competence of steel structures |
ISO 9330-5:2000
|
Welded steel tubes for pressure purposes — Technical delivery conditions — Part 5: Submerged arc-welded unalloyed and alloyed steel tubes with specified low temperature properties |
BS ISO 14654:1999
|
Epoxy-coated steel for the reinforcement of concrete |
14/30284697 DC : 0
|
BS ISO 683-5 - HEAT TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 5: NITRIDING STEELS |
BS 6404-8.2(1986) : 1986
|
MAGNETIC MATERIALS - INDIVIDUAL MATERIALS - SPECIFICATION FOR COLD ROLLED MAGNETIC NON ORIENTED ALLOYED STEEL STRIP DELIVERED IN THE SEMI PROCESSED STATE |
BS ISO 16143-2:2014
|
Stainless steels for general purposes Corrosion-resistant semi-finished products, bars, rods and sections |
10/30215691 DC : DRAFT NOV 2010
|
BS ISO 8535-1 - DIESEL ENGINES - STEEL TUBES FOR HIGH-PRESSURE FUEL INJECTION PIPES - PART 1: REQUIREMENTS FOR SEAMLESS COLD-DRAWN SINGLE-WALL TUBES |
ISO 20723:2004
|
Structural steels Surface condition of hot-rolled sections Delivery requirements |
04/30109383 DC : DRAFT MAY 2004
|
ISO 8535-1 - COMPRESSION-IGNITION ENGINES - STEEL TUBES FOR HIGH-PRESSURE FUEL INJECTION PIPES - PART 1: REQUIREMENTS FOR SEAMLESS COLD-DRAWN SINGLE-WALL TUBES |
BS 6404-8.3(1986) : 1986
|
MAGNETIC MATERIALS - INDIVIDUAL MATERIALS - SPECIFICATION FOR COLD ROLLED MAGNETIC NON ORIENTED NON ALLOYED STEEL STRIP DELIVERED IN THE SEMI PROCESSED STATE |
12/30250146 DC : 0
|
BS ISO 16143-1 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 1: FLAT PRODUCTS |
BS ISO 23717:2006
|
Steel wire and wire products. Hose reinforcement wire |
BS ISO 3183-3:1999
|
Petroleum and natural gas industries. Steel pipe for pipelines. Technical delivery conditions Pipes of requirement class C |
13/30248090 DC : 0
|
BS ISO 11951 - COLD-REDUCED BLACKPLATE IN COIL FORM FOR THE PRODUCTION OF TINPLATE OR ELECTROLYTIC CHROMIUM/CHROMIUM OXIDE-COATED STEEL |
DIN EN ISO 16120-1:2017-09
|
NON-ALLOY STEEL WIRE ROD FOR CONVERSION TO WIRE - PART 1: GENERAL REQUIREMENTS (ISO 16120-1:2017) |
03/314809 DC : DRAFT SEP 2003
|
EN ISO 13680 - PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS |
04/301144 DC : DRAFT JAN 2004
|
ISO 6931-2 - STAINLESS STEELS FOR SPRINGS - PART 2: NARROW STRIP |
BS ISO 16020:2005
|
Steel for the reinforcement and prestressing of concrete. Vocabulary |
11/30230612 DC : 0
|
BS ISO 683-11 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 11: CASE-HARDENING STEELS |
03/115881 DC : DRAFT OCT 2003
|
ISO 20723 - STRUCTURAL STEELS - SURFACE CONDITION OF HOT-ROLLED SECTIONS - DELIVERY REQUIREMENTS |
I.S. EN 60404-8-6:2017
|
MAGNETIC MATERIALS - PART 8-6: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SOFT MAGNETIC METALLIC MATERIALS |
BS EN 60404-8-6:2017
|
Magnetic materials Specifications for individual materials. Soft magnetic metallic materials |
ISO 10799-1:2011
|
Cold-formed welded structural hollow sections of non-alloy and fine grain steels — Part 1: Technical delivery conditions |
ISO 683-9:1988
|
Heat-treatable steels, alloy steels and free-cutting steels Part 9: Wrought free-cutting steels |
ISO 10799:2001
|
Structural steels Cold-formed, welded, structural hollow sections Technical delivery requirements |
API SPEC 5CRA : 2010
|
SPECIFICATION FOR CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK |
ISO 4951-3:2001
|
High yield strength steel bars and sections — Part 3: Delivery conditions for thermomechanically-rolled steels |
ISO/TR 11637:1997
|
Boron treated engineering steels for quenching and tempering |
ISO 10474:2013
|
Steel and steel products — Inspection documents |
ISO 683-18:2014
|
Heat-treatable steels, alloy steels and free-cutting steels — Part 18: Bright steel products |
ISO 2938:1974
|
Hollow steel bars for machining |
ISO 4951:1979
|
High yield strength steel bars and sections |
ASTM F 3160 : 2016
|
Standard Guide for Metallurgical Characterization of Absorbable Metallic Materials for Medical Implants |
ISO 5003:2016
|
Flat bottom (Vignole) railway rails 43 kg/m and above |
ISO 4990:2015
|
Steel castings — General technical delivery requirements |
ISO 16143-2:2014
|
Stainless steels for general purposes Part 2: Corrosion-resistant semi-finished products, bars, rods and sections |
ISO 4955:2016
|
Heat-resistant steels |
IEC 60404-8-7:2017
|
Magnetic materials - Part 8-7: Specifications for individual materials - Cold-rolled grain-oriented electrical steel strip and sheet delivered in the fully processed state |
IEC 60404-8-3:2005
|
Magnetic materials - Part 8-3: Specifications for individual materials - Cold-rolled electrical non-alloyed and alloyed steel sheet and strip delivered in the semi-processed state |
ISO 683-11:2012
|
Heat-treatable steels, alloy steels and free-cutting steels Part 11: Case-hardening steels |
ISO 6930-2:2004
|
High yield strength steel plates and wide flats for cold forming Part 2: Delivery condition for normalized, normalized rolled and as-rolled steels |
ISO 4957:1999
|
Tool steels |
ONORM EN ISO 3183 : 2013
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012) |
BS EN ISO 13680:2010
|
Petroleum and natural gas industries. Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock Technical delivery conditions |
ISO 13680:2010
|
Petroleum and natural gas industries Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock Technical delivery conditions |
ISO 16120-3:2011
|
Non-alloy steel wire rod for conversion to wire — Part 3: Specific requirements for rimmed and rimmed substitute, low-carbon steel wire rod |
IEC 60404-8-6:2016
|
Magnetic materials - Part 8-6: Specifications for individual materials - Soft magnetic metallic materials |
ISO 16120-1:2017
|
Non-alloy steel wire rod for conversion to wire — Part 1: General requirements |
BS EN ISO 683-17:2014
|
Heat-treated steels, alloy steels and free-cutting steels Ball and roller bearing steels |
ISO 683-17:2014
|
Heat-treated steels, alloy steels and free-cutting steels — Part 17: Ball and roller bearing steels |
UNE-EN ISO 683-17:2015
|
Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2014) |
EN ISO 683-17:2014
|
Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2014) |
I.S. EN ISO 16120-1:2017
|
NON-ALLOY STEEL WIRE ROD FOR CONVERSION TO WIRE - PART 1: GENERAL REQUIREMENTS (ISO 16120-1:2017) |
05/30128476 DC : DRAFT JAN 2005
|
ISO 7989-1 - STEEL WIRE AND WIRE PRODUCTS - NON-FERROUS METALLIC COATINGS ON STEEL WIRE - PART 1: GENERAL PRINCIPLES |
04/300984 DC : DRAFT JAN 2004
|
BS ISO 4955 - HEAT-RESISTING STEELS |
16/30339983 DC : 0
|
BS ISO 8535-1 - DIESEL ENGINES - STEEL TUBES FOR HIGH-PRESSURE FUEL INJECTION PIPES - PART 1: REQUIREMENTS FOR SEAMLESS COLD-DRAWN SINGLE-WALL TUBES |
06/30099300 DC : DRAFT JUN 2006
|
BS ISO 5832-1 - IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 1: WROUGHT STAINLESS STEEL |
17/30346747 DC : 0
|
BS ISO 9328-1 - STEEL FLAT PRODUCTS FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL REQUIREMENTS |
14/30248087 DC : 0
|
BS ISO 11950 - COLD-REDUCED ELECTROLYTIC CHROMIUM/CHROMIUM OXIDE-COATED STEEL |
BS 6404-8.10:1995
|
Magnetic materials. Individual materials Specification for magnetic materials (iron and steel) for use in relays |
14/30258987 DC : 0
|
BS ISO 6935-2 - STEEL FOR THE REINFORCEMENT OF CONCRETE - PART 2: RIBBED BARS |
ISO 6935-2:2015
|
Steel for the reinforcement of concrete Part 2: Ribbed bars |
17/30337413 DC : 0
|
BS EN ISO 4957 - TOOL STEELS |
BS ISO 683-5:2017
|
Heat treatable steels, alloy steels and free-cutting steels Nitriding steels |
API 5CRA CHINESE : 2011
|
SPECIFICATION FOR CORROSION RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK |
PD ISO/TS 7705:2017
|
Guidelines for specifying Charpy V-notch impact prescriptions in steel specifications |
13/30256266 DC : 0
|
BS ISO 683-18 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 18: BRIGHT STEEL PRODUCTS |
BS EN ISO 3183 : 2012
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
NFS 94 051 : 2000
|
IMPLANTS FOR SURGERY - METALLIC MATERIALS - WROUGHT STAINLESS STEEL |
97/703009 DC : 0
|
PREN 10208-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 3: PIPES OF REQUIREMENT CLASS C |
BS ISO 5832-9:2007
|
Implants for surgery. Metallic materials Wrought high nitrogen stainless steel |
BS 6362:1984
|
Specification for stainless steel tubes suitable for screwing in accordance with BS 21 \'Pipe threads for tubes and fittings where pressure-tight joints are made on the threads\' |
ISO 6930:1983
|
High yield strength flat steel products for cold forming |
ISO 2604-1:1975
|
Steel products for pressure purposes Quality requirements Part 1: Forgings |
UNI EN ISO 3183 : 2012
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
ISO 9329-2:1997
|
Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 2: Unalloyed and alloyed steels with specified elevated temperature properties |
ISO 8458-1:2002
|
Steel wire for mechanical springs Part 1: General requirements |
ISO 22034-1:2007
|
Steel wire and wire products — Part 1: General test methods |
ISO 2604-2:1975
|
Steel products for pressure purposes Quality requirements Part 2: Wrought seamless tubes |
NF ISO 8535-1 : 1992
|
COMPRESSION-IGNITION ENGINES - STEEL TUBES FOR HIGH-PRESSURE FUEL INJECTION PIPES - PART 1: REQUIREMENTS FOR SEAMLESS COLD-DRAWN SINGLE-WALL TUBES |
ISO 12633-1:2011
|
Hot-finished structural hollow sections of non-alloy and fine grain steels — Part 1: Technical delivery conditions |
ISO 16143-3:2014
|
Stainless steels for general purposes Part 3: Wire |
ISO 3183-2:1996
|
Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 2: Pipes of requirements class B |
ISO 8457-2:1989
|
Steel wire rod Part 2: Quality requirements for unalloyed steel wire rods for conversion to wire |
EN ISO 4957:1999
|
Tool steels (ISO 4957:1999) |
ISO 683-5:2017
|
Heat treatable steels, alloy steels and free-cutting steels — Part 5: Nitriding steels |
ISO 683-15:1992
|
Heat-treatable steels, alloy steels and free-cutting steels — Part 15: Valve steels for internal combustion engines |
ISO 683-10:1987
|
Heat-treatable steels, alloy steels and free-cutting steels Part 10: Wrought nitriding steels |
ISO 8535-2:2003
|
Compression-ignition engines Steel tubes for high-pressure fuel injection pipes Part 2: Requirements for composite tubes |
ISO 7989-1:2006
|
Steel wire and wire products Non-ferrous metallic coatings on steel wire Part 1: General principles |
BS EN ISO 4957:2000
|
Tool steels |
EN ISO 16120-3:2011
|
Non-alloy steel wire rod for conversion to wire - Part 3: Specific requirements for rimmed and rimmed substitute, low-carbon steel wire rod (ISO 16120-3:2011) |
DIN EN ISO 16120-3:2011-10
|
Non-alloy steel wire rod for conversion to wire - Part 3: Specific requirements for rimmed and rimmed substitute, low-carbon steel wire rod (ISO 16120-3:2011) |
NBR 13911 : 2013
|
SURGICAL INSTRUMENTS - METALLIC MATERIAL - SPECIFICATIONS FOR WROUGHT STAINLESS STEEL |
ONORM EN ISO 683-17 : 2015
|
HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS (ISO 683-17:2014) |