|
UNE-EN 1501-5:2012
|
Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles |
|
I.S. EN 16228-6:2014
|
DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 6: JETTING, GROUTING AND INJECTION EQUIPMENT |
|
BS EN ISO 13856-3:2013
|
Safety of machinery. Pressure-sensitive protective devices General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices |
|
14/30265058 DC : 0
|
BS EN ISO 13850 - SAFETY OF MACHINERY - EMERGENCY STOP FUNCTION - PRINCIPLES FOR DESIGN |
|
14/30270486 DC : 0
|
BS ISO 18296 - SHIPS AND MARINE TECHNOLOGY - SHIP-SHIFTING WINCHES |
|
13/30265681 DC : 0
|
BS ISO 10771-1 - HYDRAULIC FLUID POWER - FATIGUE PRESSURE TESTING OF METAL PRESSURE-CONTAINING ENVELOPES - PART 1: TEST METHOD |
|
DIN EN 1034-21 E : 2012
|
SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 21: COATING MACHINES |
|
PREN 12733 : DRAFT 2016
|
AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED MOTOR MOWERS - SAFETY |
|
BS EN 1870-19:2013
|
Safety of woodworking machines. Circular sawing machines Circular saw benches (with and without sliding table) and building site saws |
|
I.S. EN 1870-18:2013
|
SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS |
|
I.S. EN ISO 12100-2:2003
|
SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES |
|
13/30266413 DC : 0
|
BS ISO 13105-2 - BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - MACHINERY FOR CONCRETE SURFACE FLOATING AND FINISHING - PART 2: SAFETY REQUIREMENTS AND VERIFICATION |
|
BS ISO 8132:2014
|
Hydraulic fluid power. Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series |
|
12/30244749 DC : 0
|
BS EN 15955-2 - RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
|
DIN EN ISO 13856-2:2013-08
|
SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE-SENSITIVE EDGES AND PRESSURE-SENSITIVE BARS (ISO 13856-2:2013) |
|
ISO 13105-2:2014
|
Building construction machinery and equipment — Machinery for concrete surface floating and finishing — Part 2: Safety requirements and verification |
|
BS ISO 16110-1:2007
|
Hydrogen generators using fuel processing technologies Safety |
|
BS ISO 20474-1:2017
|
Earth-moving machinery. Safety General requirements |
|
BS EN ISO 80079-37:2016
|
Explosive atmospheres Non-electrical equipment for explosive atmospheres. Non-electrical type of protection constructional safety \'\'c\'\', control of ignition sources \'\'b\'\', liquid immersion \'\'k\'\' |
|
16/30337092 DC
|
BS EN 13378. Pasta processing plant. Pasta presses. Safety and hygiene requirements |
|
DIN EN 16486 E : 2014
|
MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS |
|
DIN EN 16564 E : 2015
|
MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES, INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS |
|
BS EN 15954-2:2013
|
Railway applications. Track. Trailers and associated equipment General safety requirements |
|
12/30253910 DC : DRAFT JULY 2012
|
BS EN 1807-2 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - LOG SAWING MACHINES |
|
UNE-EN 16743:2016
|
Food processing machinery - Automatic industrial slicing machines - Safety and hygiene requirements |
|
ISO 21789:2009
|
Gas turbine applications — Safety |
|
13/30279579 DC : 0
|
BS ISO 19372 - MICROTURBINES APPLICATIONS - SAFETY |
|
BS EN 16246:2012
|
Agricultural machinery. Backhoes. Safety |
|
BS EN 1034-16:2012
|
Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines Paper and board making machines |
|
16/30331346 DC : 0
|
BS EN ISO 14118 - SAFETY OF MACHINERY - PREVENTION OF UNEXPECTED START-UP |
|
06/30134300 DC : DRAFT MAY 2006
|
ISO 21628 - AGRICULTURE AND FORESTRY MACHINERY - POWERED MATERIAL COLLECTING SYSTEMS - SAFETY |
|
DIN EN 16564:2015-04
|
Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions |
|
11/30231451 DC : DRAFT SEP 2011
|
BS EN ISO 13856-1 - SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE MATS AND PRESSURE-SENSITIVE FLOORS |
|
13/30273033 DC : 0
|
BS EN 1012-3 - COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS |
|
14/30278956 DC : 0
|
BS ISO 17842-2 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 2: OPERATION, MAINTENANCE AND USE |
|
BS ISO 10762:2015
|
Hydraulic fluid power. Mounting dimensions for cylinders, 10 MPa (100 bar) series |
|
12/30243465 DC : 0
|
BS ISO/IEC 80079-38 - EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES |
|
15/30281554 DC : 0
|
BS ISO 10896-2 - ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SLEWING TRUCKS |
|
16/30333286 DC : 0
|
BS ISO 14955-1 - MACHINE TOOLS - ENVIRONMENTAL EVALUATION OF MACHINE TOOLS - PART 1: DESIGN METHODOLOGY FOR ENERGY-EFFICIENT MACHINE TOOLS |
|
BS EN 16252:2012
|
Machines for compacting waste materials or recyclable fractions. Horizontal baling presses. Safety requirements |
|
DIN EN 15180:2015-01
|
FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS |
|
16/30277014 DC : DRAFT MAR 2016
|
BS ISO 20474-1 - EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
|
BS EN 16474:2015
|
Plastics and rubber machines. Tyre curing machines. Safety requirements |
|
DIN EN ISO 11850:2016-06
|
Machinery for forestry - General safety requirements (ISO 11850:2011 + Amd 1:2016) (includes Amendment :2016) |
|
11/30232164 DC : 0
|
BS ISO 12140 - AGRICULTURAL MACHINERY - AGRICULTURAL TRAILERS AND TRAILED EQUIPMENT - DRAWBAR JACKS |
|
BS EN 62282-3-100:2012
|
Fuel cell technologies Stationary fuel cell power systems. Safety |
|
06/30151312 DC : DRAFT JUN 2006
|
BS ISO 22673 - SHIPS AND MARINE TECHNOLOGY - LAUNCHING APPLIANCES FOR FREE-FALL LIFEBOATS |
|
PD CEN/TR 14489:2005
|
Fire-resistant hydraulic fluids. Classification and specification. Guidelines on selection for the protection of safety, health and the environment |
|
I.S. EN 1459-1:2017
|
ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 1: VARIABLE-REACH TRUCKS |
|
BS EN 62282-3-1:2007
|
Fuel cell technologies Stationary fuel cell power systems. Safety |
|
I.S. EN ISO 80079-37:2016
|
EXPLOSIVE ATMOSPHERES - PART 37: NON-ELECTRICAL EQUIPMENT FOR EXPLOSIVE ATMOSPHERES - NON-ELECTRICAL TYPE OF PROTECTION CONSTRUCTIONAL SAFETY ''C'', CONTROL OF IGNITION SOURCES ''B'', LIQUID IMMERSION ''K'' (ISO/DIS 80079-37:2014) |
|
15/30285702 DC : 0
|
BS EN ISO 16092-3 - MACHINE TOOLS SAFETY - PRESSES - PART 3: SAFETY REQUIREMENTS FOR HYDRAULIC PRESSES |
|
11/30212367 DC : 0
|
BS EN ISO 13482 - ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR NON-INDUSTRIAL ROBOTS - NON-MEDICAL PERSONAL CARE ROBOT |
|
PREN 474-1 : DRAFT 2017
|
EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
|
14/30280597 DC : 0
|
BS ISO 1219-3 - FLUID POWER SYSTEMS AND COMPONENTS - GRAPHICAL SYMBOLS AND CIRCUIT DIAGRAMS - PART 3: SYMBOL MODULES AND CONNECTED SYMBOLS IN CIRCUIT DIAGRAMS |
|
BS ISO 15217:2000
|
Fluid power systems and components. 16mm square electrical connector with earth contact. Characteristics and requirements |
|
BS EN 15180:2014
|
Food processing machinery. Food depositors. Safety and hygiene requirements |
|
13/30276226 DC : 0
|
BS EN 16564 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS |
|
12/30243084 DC : 0
|
BS EN 1034-21 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 21: COATING MACHINES |
|
ANSI B11.3 : 2012
|
SAFETY REQUIREMENTS FOR POWER PRESS BRAKES |
|
06/30157092 DC : 0
|
ISO/DIS 21789 - GAS TURBINE APPLICATIONS - SAFETY |
|
ISO 16092-1:2017
|
Machine tools safety — Presses — Part 1: General safety requirements |
|
ISO 9386-2:2000
|
Power-operated lifting platforms for persons with impaired mobility — Rules for safety, dimensions and functional operation — Part 2: Powered stairlifts for seated, standing and wheelchair users moving in an inclined plane |
|
DIN EN 1807-1:2013-06
|
Safety of woodworking machines - Band sawing machines - Part 1: Table band saws and band re-saws |
|
DIN EN 15861:2013-06
|
Food processing machinery - Smokehouses - Safety and hygiene requirements |
|
ANSI B11.6 : 2001 : R2012
|
SAFETY REQUIREMENTS FOR MANUAL TURNING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL |
|
DIN EN 1034-16:2012-06
|
SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 16: PAPER AND BOARD MAKING MACHINES |
|
PREN 15572 : DRAFT 2013
|
MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES |
|
DIN EN ISO 13482:2014-11
|
ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR PERSONAL CARE ROBOTS (ISO 13482:2014) |
|
ISO 16090-1:2017
|
Machine tools safety — Machining centres, Milling machines, Transfer machines — Part 1: Safety requirements |
|
UNI EN 15165 : 2014
|
FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
|
DIN EN 16486:2014-10
|
MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS |
|
ISO 18758-2:2018
|
Mining and earth-moving machinery — Rock drill rigs and rock reinforcement rigs — Part 2: Safety requirements |
|
I.S. EN 1012-3:2013
|
COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS |
|
ANSI FC 1 : 2012
|
STATIONARY FUEL CELL POWER SYSTEMS |
|
PREN ISO 13856-2 : DRAFT 2011
|
SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURESENSITIVE EDGES AND PRESSURE-SENSITIVE BARS (ISO/DIS 13856-2:2011) |
|
PREN 15163 : DRAFT 2014
|
MACHINES AND INSTALLATIONS FOR THE EXPLOITATION AND PROCESSING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR DIAMOND WIRE SAWS AND DIAMOND MULTI-WIRE SAWS |
|
I.S. EN 415-10:2014
|
SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS |
|
I.S. EN ISO 18217:2015
|
SAFETY OF WOODWORKING MACHINES - EDGE-BANDING MACHINES FED BY CHAIN(S) (ISO 18217:2015) |
|
I.S. EN 1570-1:2011
|
SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 1: LIFTING TABLES SERVING UP TO TWO FIXED LANDINGS |
|
I.S. EN 1807-2:2013
|
SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 2: LOG SAWING MACHINES |
|
BS EN 16005:2012
|
Power operated pedestrian doorsets. Safety in use. Requirements and test methods |
|
I.S. EN 16564:2014
|
MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES, INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS |
|
I.S. EN ISO 16092-3:2018
|
MACHINE TOOLS SAFETY - PRESSES - PART 3: SAFETY REQUIREMENTS FOR HYDRAULIC PRESSES (ISO 16092-3:2017) |
|
I.S. EN 15571:2014
|
MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES |
|
I.S. EN 16500:2014
|
MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS |
|
I.S. EN ISO 19085-3:2017
|
WOODWORKING MACHINES - SAFETY REQUIREMENTS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES (ISO 19085-3:2017) |
|
I.S. EN 15180:2014
|
FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS |
|
ISO 19225:2017
|
Underground mining machines — Mobile extracting machines at the face — Safety requirements for shearer loaders and plough systems |
|
ISO 1219-2:2012
|
Fluid power systems and components — Graphical symbols and circuit diagrams — Part 2: Circuit diagrams |
|
UNI EN ISO 12100 : 2010
|
SAFETY OF MACHINERY - GENERAL PRINCIPLES FOR DESIGN - RISK ASSESSMENT AND RISK REDUCTION |
|
I.S. EN 15861:2012
|
FOOD PROCESSING MACHINERY - SMOKEHOUSES - SAFETY AND HYGIENE REQUIREMENTS |
|
ISO/IEC 80079-38:2016
|
Explosive atmospheres Part 38: Equipment and components in explosive atmospheres in underground mines |
|
ISO 17165-1:2007
|
Hydraulic fluid power Hose assemblies Part 1: Dimensions and requirements |
|
DIN EN 1459-2 E : 2016
|
ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SLEWING VARIABLE-REACH TRUCKS |
|
UNI EN 15180 : 2014
|
FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS |
|
I.S. EN 1034-17:2012
|
SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 17: TISSUE MAKING MACHINES |
|
ISO 19085-1:2017
|
Woodworking machines Safety Part 1: Common requirements |
|
UNE-EN ISO 13856-1:2013
|
Safety of machinery - Pressure-sensitive protective devices - Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors (ISO 13856-1:2013) |
|
17/30354108 DC : 0
|
BS EN 17106-1 - ROAD OPERATION MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
|
17/30362886 DC : 0
|
BS EN 12609 - TRUCK MIXERS - SAFETY REQUIREMENTS |
|
16/30322398 DC : 0
|
BS EN 1612 - PLASTICS AND RUBBER MACHINES - REACTION MOULDING MACHINES AND PLANTS - SAFETY REQUIREMENTS |
|
I.S. EN ISO 11850:2011
|
MACHINERY FOR FORESTRY - GENERAL SAFETY REQUIREMENTS (ISO 11850:2011) |
|
BS EN 1459-1:2017
|
Rough-terrain trucks. Safety requirements and verification Variable-reach trucks |
|
I.S. EN ISO 19085-5:2017
|
WOODWORKING MACHINES - SAFETY - PART 5: DIMENSION SAWS (ISO 19085-5:2017) |
|
ISO 10896-2:2016
|
Rough-terrain trucks — Safety requirements and verification — Part 2: Slewing trucks |
|
I.S. EN ISO 14118:2018
|
SAFETY OF MACHINERY - PREVENTION OF UNEXPECTED START-UP (ISO 14118:2017) |
|
EN 1459-1:2017
|
Rough-terrain trucks - Safety requirements and verification - Part 1: Variable-reach trucks |
|
NF EN ISO 19085-1 : 2017
|
WOODWORKING MACHINES - SAFETY - PART 1: COMMON REQUIREMENTS |
|
13/30273889 DC : 0
|
BS EN 16517 - AGRICULTURAL AND FORESTRY MACHINERY - MOBILE YARDERS FOR TIMBER LOGGING - SAFETY |
|
UNE-EN 16500:2015
|
Machines for compacting waste materials or recyclable fractions - Vertical baling presses - Safety requirements |
|
UNE-EN ISO 19085-1:2018
|
Woodworking machines - Safety - Part 1: Common requirements (ISO 19085-1:2017) |
|
16/30314039 DC : 0
|
BS EN 12301 - PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS |
|
BS EN 1459-2 : 2015
|
ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SLEWING VARIABLE-REACH TRUCKS |
|
NF ISO 16110-1 : 2009
|
HYDROGEN GENERATORS USING FUEL PROCESSING TECHNOLOGIES - PART 1: SAFETY |
|
UNE-EN 1459-2:2016
|
Rough-terrain trucks - Safety requirements and verification - Part 2: Slewing variable-reach trucks |
|
EN ISO 4254-1:2015
|
Agricultural machinery - Safety - Part 1: General requirements (ISO 4254-1:2013) |
|
DIN EN ISO/IEC 80079-38:2012-08 (Draft)
|
EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079-38:2016) |
|
ISO 16089:2015
|
Machine tools Safety Stationary grinding machines |
|
SAE J 1779 : 2013
|
SHIP SYSTEMS AND EQUIPMENT - HYDRAULIC SYSTEM DESIGN CRITERIA FOR MARINE VEHICLES |
|
EN ISO 16090-1:2018
|
Machine tools safety - Machining centres, Milling machines, Transfer machines - Part 1: Safety requirements (ISO 16090-1:2017) |
|
EN 12013:2018
|
Plastics and rubber machines - Internal mixers - Safety requirements |
|
ISO 15442:2012
|
Cranes — Safety requirements for loader cranes |
|
DIN EN 609-1:2010-07
|
AGRICULTURAL AND FORESTRY MACHINERY - SAFETY OF LOG SPLITTERS - PART 1: WEDGE SPLITTERS |
|
DIN EN 1034-3:2012-02
|
SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 3: REREELERS AND WINDERS |
|
DIN EN 1552:2003-09
|
UNDERGROUND MINING MACHINES - MOBILE EXTRACTING MACHINES AT THE FACE - SAFETY REQUIREMENTS FOR SHEARER LOADERS AND PLOUGH SYSTEMS |
|
DIN EN 13525:2010-05
|
FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY |
|
DIN EN 1870-7:2013-01
|
Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading |
|
DIN EN ISO 13849-2:2013-02
|
SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION (ISO 13849-2:2012) |
|
DIN EN 1870-12:2014-03
|
Safety of woodworking machines - Circular sawing machines - Part 12: Pendulum cross-cut sawing machines |
|
DIN EN 1870-9:2013-01
|
SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 9: DOUBLE BLADE CIRCULAR SAWING MACHINES FOR CROSS-CUTTING WITH INTEGRATED FEED AND WITH MANUAL LOADING AND/OR UNLOADING |
|
DIN EN 13418:2013-08
|
PLASTICS AND RUBBER MACHINES - WINDING MACHINES FOR FILM OR SHEET - SAFETY REQUIREMENTS |
|
DIN EN 14359 E : 2017
|
GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS |
|
I.S. EN 861:2007
|
SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES |
|
BS EN 13524 : 2003
|
HIGHWAY MAINTENANCE MACHINES - SAFETY REQUIREMENTS |
|
PD ISO/TR 10771-2:2008
|
Hydraulic fluid power. Fatigue pressure testing of metal pressure-containing envelopes Rating method |
|
UNE-EN 1870-4:2012
|
Safety of woodworking machines - Circular sawing machines - Part 4: Multiblade rip sawing machines with manual loading and/or unloading |
|
ISO 12100-2:2003
|
Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
|
BS EN 12111:2014
|
Tunnelling machines. Road headers and continuous miners. Safety requirements |
|
UNE-EN 1870-7:2013
|
Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading |
|
11/30235014 DC : 0
|
BS EN 13135 - CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT |
|
BS EN 859 : 2007
|
SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANING MACHINES |
|
UNE-EN ISO 13849-2:2013
|
Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2012) |
|
BS EN 1889-1:2011
|
Machines for underground mines. Mobile machines working underground. Safety Rubber tyred vehicles |
|
BS EN 13418:2013
|
Plastics and rubber machines. Winding machines for film or sheet. Safety requirements |
|
05/30060689 DC : DRAFT JUN 2005
|
IEC 62282-3-1 - FUEL CELL TECHNOLOGIES - PART 3-1: STATIONARY FUEL CELL POWER PLANTS - SAFETY |
|
BS EN 14044:2014
|
High rise aerial appliances for fire and rescue service use. Turntable ladders with sequential movements. Safety and performance requirements and test methods |
|
BS EN 1870-15:2012
|
Safety of woodworking machines. Circular sawing machines Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading |
|
BS EN 1870-9:2012
|
Safety of woodworking machines. Circular sawing machines Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading |
|
14/30278953 DC : 0
|
BS ISO 17842-1 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE |
|
IEC 62282-3-1:2007
|
Fuel cell technologies - Part 3-1: Stationary fuel cell power systems - Safety |
|
BS EN 1870-10:2013
|
Safety of woodworking machines. Circular sawing machines Single blade automatic and semi-automatic up-cutting cross-cut sawing machines |
|
BS EN ISO 10472-1:2008
|
Safety requirements for industrial laundry machinery Common requirements |
|
BS EN ISO 4254-1:2015
|
Agricultural machinery. Safety General requirements |
|
I.S. EN 859:2007
|
SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANNING MACHINES |
|
I.S. EN 12463:2014
|
FOOD PROCESSING MACHINERY - FILLING MACHINES AND AUXILIARY MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
|
I.S. EN 13871:2014
|
FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS |
|
EN 13870:2015
|
Food processing machinery - Portion cutting machines - Safety and hygiene requirements |
|
EN 12463:2014
|
Food processing machinery - Filling machines and auxiliary machines - Safety and hygiene requirements |
|
I.S. EN 14043:2014
|
HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH COMBINED MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS |
|
I.S. EN 13289:2001
|
PASTA PROCESSING PLANTS - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS |
|
EN 1034-17:2012
|
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 17: Tissue making machines |
|
EN 13418:2013
|
Plastics and rubber machines - Winding machines for film or sheet - Safety requirements |
|
EN 1114-1:2011
|
Plastics and rubber machines - Extruders and extrusion lines - Part 1: Safety requirements for extruders |
|
EN ISO 23125:2015
|
Machine tools - Safety - Turning machines (ISO 23125:2015, Corrected version 2016-03-15) |
|
EN 1501-5:2011
|
Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles |
|
EN 62282-3-1 : 2007
|
FUEL CELL TECHNOLOGIES - PART 3-1: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
|
EN 16228-1:2014
|
Drilling and foundation equipment - Safety - Part 1: Common requirements |
|
EN 13020:2015
|
Road surface treatment machines - Safety requirements |
|
EN 16191:2014
|
Tunnelling machinery - Safety requirements |
|
EN 1034-8:2012
|
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 8: Refining plants |
|
EN 1501-1:2011+A1:2015
|
Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collection vehicles |
|
DIN EN 982:2009-06
|
SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - HYDRAULICS |
|
EN 1034-21:2012
|
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 21: Coating machines |
|
EN 1807-1:2013
|
Safety of woodworking machines - Band sawing machines - Part 1: Table band saws and band re-saws |
|
UNI EN 12463 : 2014
|
FOOD PROCESSING MACHINERY - FILLING MACHINES AND AUXILIARY MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
|
DIN EN ISO 12100-2:2004-04
|
SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES |
|
EN 13289:2001+A1:2013
|
Pasta processing plants - Dryers and coolers - Safety and hygiene requirements |
|
EN ISO 80079-37:2016
|
Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres - Non-electrical type of protection constructional safety 'c', control of ignition sources 'b', liquid immersion 'k' (ISO 80079-37:2016) |
|
EN 1034-26:2012
|
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 26: Roll packaging machines |
|
DIN EN ISO 80079-37 E : 2016
|
EXPLOSIVE ATMOSPHERES - PART 37: NON-ELECTRICAL EQUIPMENT FOR EXPLOSIVE ATMOSPHERES - NON-ELECTRICAL TYPE OF PROTECTION CONSTRUCTIONAL SAFETY 'C', CONTROL OF IGNITION SOURCES 'B', LIQUID IMMERSION 'K' (ISO 80079-37:2016) |
|
I.S. EN 16252:2012
|
MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - HORIZONTAL BALING PRESSES - SAFETY REQUIREMENTS |
|
12/30265270 DC : 0
|
BS EN 1870-6 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIREWOOD AND DUAL PURPOSE CIRCULAR SAWING MACHINES FOR FIREWOOD/CIRCULAR SAW BENCHES, WITH MANUAL LOADING AND/OR UNLOADING |
|
BS EN 1034-8:2012
|
Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines Refining plants |
|
DIN EN 1034-21:2012-11
|
SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 21: COATING MACHINES |
|
DIN EN 15955-2:2013-09
|
RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
|
DIN EN ISO 13856-3 E : 2013
|
SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES (ISO 13856-3:2013) |
|
15/30326831 DC : 0
|
BS EN 1114-3 - PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS |
|
UNE-EN ISO 16093:2017
|
Machine tools - Safety - Sawing machines for cold metal (ISO 16093:2017) |
|
UNI EN 1870-19 : 2014
|
SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS |
|
UNI EN 16500 : 2014
|
MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS |
|
CSA M4254.1 : 2007
|
AGRICULTURAL MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
|
I.S. EN 13463-5:2011
|
NON-ELECTRICAL EQUIPMENT INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 5: PROTECTION BY CONSTRUCTIONAL SAFETY 'C' |
|
13/30256922 DC : 0
|
BS EN 1459-1 - ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 1: VARIABLE-REACH TRUCKS |
|
17/30341100 DC : 0
|
BS ISO 18758-2 - MINING AND EARTH-MOVING MACHINERY - ROCK DRILL RIGS AND ROCK REINFORCEMENT RIGS - PART 2: SAFETY REQUIREMENTS |
|
CSA Z432 : 2016
|
SAFEGUARDING OF MACHINERY |
|
12/30260942 DC : 0
|
BS EN 13871 - FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS |
|
PREN 1672-1 : DRAFT 2012
|
FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS |
|
DIN EN ISO 13856-1:2013-08
|
SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE-SENSITIVE MATS AND PRESSURE-SENSITIVE FLOORS (ISO 13856-1:2013) |
|
14/30274816 DC : 0
|
BS EN ISO 16089 - MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES |
|
UNI EN ISO 13856-3 : 2013
|
SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES |
|
14/30297842 DC : 0
|
BS EN 15163 - MACHINES AND INSTALLATIONS FOR THE EXPLOITATION AND PROCESSING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR DIAMOND WIRE SAWS AND DIAMOND MULTI-WIRE SAWS |
|
I.S. EN ISO 16092-1:2018
|
MACHINE TOOLS SAFETY - PRESSES - PART 1: GENERAL SAFETY REQUIREMENTS (ISO 16092-1:2017) |
|
00/710433 DC : DRAFT JUNE 2000
|
ISO/CD 15516 - SHIPS AND MARINE TECHNOLOGY - LAUNCHING APPLIANCES FOR DAVIT-LAUNCHED LIFEBOATS |
|
PREN 1114-3 : DRAFT 2015
|
PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS |
|
BS EN 16500:2014
|
Machines for compacting waste materials or recyclable fractions. Vertical baling presses. Safety requirements |
|
12/30232434 DC : 0
|
BS EN 1870-5:2002+A1:2009 AMD 2 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAWBENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES |
|
13/30277125 DC : 0
|
BS EN 1908 - SAFETY REQUIREMENTS OF CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - TENSIONING DEVICES |
|
ANSI S2.48 : 1993
|
SERVO-HYDRAULIC TEST EQUIPMENT FOR GENERATING VIBRATION - METHODS OF DESCRIBING CHARACTERISTICS |
|
12/30259421 DC : 0
|
BS EN 1672-1 - FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS |
|
DIN EN 1807-2:2013-06
|
Safety of woodworking machines - Band sawing machines - Part 2: Log sawing machines; German version EN 1807-2:2013 |
|
UNI EN 16191 : 2014
|
TUNNELLING MACHINERY - SAFETY REQUIREMENTS |
|
UNI EN 16228-1 : 2014
|
DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 1: COMMON REQUIREMENTS |
|
12/30255086 DC : 0
|
BS EN 289 - PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS |
|
UNE-EN 16246:2013
|
Agricultural machinery - Backhoes - Safety |
|
ISO 18296:2014
|
Ships and marine technology — Ship-shifting winches |
|
BS EN 14033-3 : 2009
|
RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS |
|
BS ISO 6020-2:2015
|
Hydraulic fluid power. Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series Compact series |
|
BS EN ISO 8230-1:2008
|
Safety requirements for dry-cleaning machines Common safety requirements |
|
UNE-EN 691-1:2013
|
Safety of woodworking machines - Part 1: Common requirements |
|
A-A-59412 Revision A:2013
|
SWAGING MACHINE, ROTARY, FLOOR-MOUNTED |
|
DIN EN 15949:2012-05
|
Safety of machinery - Safety requirements for bar mills, structural steel mills and wire rod mills |
|
DIN EN ISO 16089 E : 2016
|
MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES (ISO 16089:2015) |
|
16/30335973 DC : 0
|
BS ISO 19085-9 - WOODWORKING MACHINES - SAFETY - PART 9: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) |
|
15/30295265 DC : 0
|
BS EN 13204 - DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS |
|
UNI EN 1034-26 : 2012
|
SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 26: ROLL PACKAGING MACHINES |
|
12/30259995 DC : 0
|
BS EN 12463 - FOOD PROCESSING MACHINERY - FILLING MACHINES AND AUXILIARY MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
|
17/30359101 DC : 0
|
BS ISO 21873-2 - BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - MOBILE CRUSHERS - PART 2: SAFETY REQUIREMENTS |
|
I.S. EN 62282-3-1:2007
|
FUEL CELL TECHNOLOGIES - PART 3-1: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
|
BS ISO 1219-2:2012
|
Fluid power systems and components. Graphical symbols and circuit diagrams Circuit diagrams |
|
BS ISO 14955-1:2017
|
Machine tools. Environmental evaluation of machine tools Design methodology for energy-efficient machine tools |
|
11/30244804 DC : 0
|
BS EN 940:2009/A1 - SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES |
|
12/30270038 DC : 0
|
BS EN 16500 - MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS |
|
BS EN 16191:2014
|
Tunnelling machinery. Safety requirements |
|
BS EN 16743:2016
|
Food processing machinery. Automatic industrial slicing machines. Safety and hygiene requirements |
|
BS EN 16486:2014
|
Machines for compacting waste materials or recyclable fractions. Compactors. Safety requirements |
|
BS ISO 10896-2:2016
|
Rough-terrain trucks. Safety requirements and verification Slewing trucks |
|
12/30244743 DC : 0
|
BS EN 15954-2 - RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
|
13/30276223 DC : 0
|
BS EN 15572 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES |
|
UNI EN ISO 28881 : 2013
|
MACHINE TOOLS - SAFETY - ELECTRO-DISCHARGE MACHINES |
|
BS ISO 15516:2006
|
Ships and marine technology. Launching appliances for davit-launched lifeboats |
|
UNE-EN ISO 13856-2:2013
|
Safety of machinery - Pressure-sensitive protective devices - Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars (ISO 13856-2:2013) |
|
BS EN 15572:2015
|
Machines and plants for mining and tooling of natural stone. Safety. Requirements for edge finishing machines |
|
PREN 1908 : DRAFT 2013
|
SAFETY REQUIREMENTS OF CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - TENSIONING DEVICES |
|
BS ISO 10972-1:1998
|
Cranes. Requirements for mechanisms General |
|
BS ISO 6020-3:2015
|
Hydraulic fluid power. Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series Compact series with bores from 250 mm to 500 mm |
|
BS EN 1672-1:2014
|
Food processing machinery. Basic concepts Safety requirements |
|
PREN 15746-2 : DRAFT 2015
|
RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
|
DIN EN 15861 E : 2013
|
FOOD PROCESSING MACHINERY - SMOKEHOUSES - SAFETY AND HYGIENE REQUIREMENTS |
|
UNI ISO 5598 : 2012
|
FLUID POWER SYSTEMS AND COMPONENTS - VOCABULARY |
|
DIN EN 12977-5:2016-08 (Draft)
|
THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 5: PERFORMANCE TEST METHODS FOR CONTROL EQUIPMENT |
|
DIN EN 1570-1:2015-01
|
SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 1: LIFTING TABLES SERVING UP TO TWO FIXED LANDINGS |
|
CSA Z142 : 2010 : R2014
|
CODE FOR POWER PRESS OPERATION: HEALTH, SAFETY, AND SAFEGUARDING REQUIREMENTS |
|
ANSI B11.8:2001(R2007)
|
SAFETY REQUIREMENTS FOR MANUAL MILLING, DRILLING AND BORING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL |
|
UNI EN 16252 : 2013
|
MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - HORIZONTAL BALING PRESSES - SAFETY REQUIREMENTS |
|
UNI EN 16486 : 2014
|
MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS |
|
ISO 21873-2:2009
|
Building construction machinery and equipment Mobile crushers Part 2: Safety requirements |
|
DIN EN ISO 18217 E : 2015
|
SAFETY OF WOODWORKING MACHINES - EDGEBANDING MACHINES FED BY CHAIN(S) (ISO 18217:2015) |
|
UNI EN ISO 11806-2 : 2012
|
AGRICULTURAL AND FORESTRY MACHINERY - SAFETY REQUIREMENTS AND TESTING FOR PORTABLE, HAND-HELD, POWERED BRUSH-CUTTERS AND GRASS-TRIMMERS - PART 2: MACHINES FOR USE WITH BACK-PACK POWER UNIT |
|
I.S. EN ISO 3691-2:2016
|
INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SELF-PROPELLED VARIABLE-REACH TRUCKS |
|
PREN 1870-6 : DRAFT 2012
|
SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIREWOOD AND DUAL PURPOSE CIRCULAR SAWING MACHINES FOR FIREWOOD/CIRCULAR SAW BENCHES, WITH MANUAL LOADING AND/OR UNLOADING |
|
I.S. EN 1807-1:2013
|
SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS |
|
I.S. EN 12999:2011
|
CRANES - LOADER CRANES |
|
ANSI B11.0 : 2015
|
SAFETY OF MACHINERY - GENERAL REQUIREMENTS AND RISK ASSESSMENT |
|
BS EN ISO/IEC 80079-38 : 2016
|
EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079 38:2016) |
|
I.S. EN 16486:2014
|
MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS |
|
I.S. EN 1672-1:2014
|
FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS |
|
16/30328759 DC : 0
|
BS EN 13814-1 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE |
|
I.S. EN 15163:2017
|
MACHINES AND INSTALLATIONS FOR THE EXPLOITATION AND PROCESSING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR DIAMOND WIRE SAWS |
|
UNI EN ISO 10218-2 : 2011
|
ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR INDUSTRIAL ROBOTS - PART 2: ROBOT SYSTEMS AND INTEGRATION |
|
I.S. EN 12453:2017
|
INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY IN USE OF POWER OPERATED DOORS - REQUIREMENTS AND TEST METHODS |
|
I.S. EN 15955-2:2013
|
RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
|
ANSI B11.2 : 2013
|
SAFETY REQUIREMENTS FOR HYDRAULIC AND PNEUMATIC POWER PRESSES |
|
BS EN 13135 : 2013
|
CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT |
|
DIN EN 15467:2015-03
|
FOOD PROCESSING MACHINERY - FISH HEADING AND FILLETING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
|
BS ISO 8133:2014
|
Hydraulic fluid power. Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) compact series |
|
ISO 1219-3:2016
|
Fluid power systems and components — Graphical symbols and circuit diagrams — Part 3: Symbol modules and connected symbols in circuit diagrams |
|
ISO 15217:2000
|
Fluid power systems and components 16 mm square electrical connector with earth contact Characteristics and requirements |
|
EN 12042 : 2014 COR 2014
|
FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS |
|
DIN EN 12042:2014-07
|
FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS |
|
ISO 10972-3:2003
|
Cranes Requirements for mechanisms Part 3: Tower cranes |
|
I.S. EN 691-1:2012
|
SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS |
|
UNE-EN 15861:2013
|
Food processing machinery - Smokehouses - Safety and hygiene requirements |
|
UNI EN 15949 : 2012
|
SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR BAR MILLS, STRUCTURAL STEEL MILLS AND WIRE ROD MILLS |
|
16/30341165 DC : 0
|
BS EN 14492-2 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
|
UNI EN 12042 : 2014
|
FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS |
|
DIN EN 12999:2013-02
|
CRANES - LOADER CRANES |
|
EN ISO 14118:2018
|
Safety of machinery - Prevention of unexpected start-up (ISO 14118:2017) |
|
EN 12999:2011+A2:2018
|
Cranes - Loader cranes |
|
EN ISO 16092-3:2018
|
Machine tools safety - Presses - Part 3: Safety requirements for hydraulic presses (ISO 16092-3:2017) |
|
UNI EN 1034-27 : 2012
|
SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 27: ROLL HANDLING SYSTEMS |
|
PREN 289 : DRAFT 2012
|
PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS |
|
UNI EN ISO 13856-1 : 2013
|
SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE MATS AND PRESSURE-SENSITIVE FLOORS |
|
EN 12453 : 2017 COR 2017
|
INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY IN USE OF POWER OPERATED DOORS - REQUIREMENTS AND TEST METHODS |
|
I.S. EN 14033-3:2017
|
RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS |
|
ISO 20966:2007
|
Automatic milking installations — Requirements and testing |
|
ISO 10771-1:2015
|
Hydraulic fluid power Fatigue pressure testing of metal pressure-containing envelopes Part 1: Test method |
|
DIN EN 12463:2015-02
|
Food processing machinery - Filling machines and auxiliary machines - Safety and hygiene requirements |
|
DIN EN 1870-10:2013-07
|
SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES |
|
DIN EN ISO 4254-1:2016-09
|
Agricultural machinery - Safety - Part 1: General requirements (ISO 4254-1:2013) |
|
DIN EN 1417:2015-03
|
Plastics and rubber machines - Two roll mills - Safety requirements; German version EN 1417:2014 |
|
DIN EN 1870-8:2013-03
|
SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 8: SINGLE BLADE EDGING CIRCULAR RIP SAWING MACHINES WITH POWER DRIVEN SAW UNIT AND MANUAL LOADING AND/OR UNLOADING |
|
DIN EN 12001:2012-11
|
CONVEYING, SPRAYING AND PLACING MACHINES FOR CONCRETE AND MORTAR - SAFETY REQUIREMENTS |
|
DIN EN 536:2016-01
|
ROAD CONSTRUCTION MACHINES - MIXING PLANTS FOR ROAD CONSTRUCTION MATERIALS - SAFETY REQUIREMENTS |
|
DIN EN 14359:2011-04
|
GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS |
|
UNE-EN 289:2014
|
Plastics and rubber machines - Compression moulding machines and transfer moulding machines - Safety requirements |
|
UNE-EN 1034-3:2012
|
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 3: Rereelers and winders |
|
BS EN 1870-7:2012
|
Safety of woodworking machines. Circular sawing machines Single blade log sawing machines with integrated feed table and manual loading and/or unloading |
|
ISO 10472-1:1997
|
Safety requirements for industrial laundry machinery Part 1: Common requirements |
|
BS EN 940 : 2009
|
SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES |
|
UNE-EN 1870-10:2013
|
Safety of woodworking machines - Circular sawing machines - Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines |
|
BS EN ISO 11111-1:2016
|
Textile machinery. Safety requirements Common requirements |
|
UNE-EN 1908:2015
|
Safety requirements of cableway installations designed to carry persons - Tensioning devices |
|
EN 62282-3-100:2012
|
Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety |
|
BS EN ISO 13849-2:2012
|
Safety of machinery. Safety-related parts of control systems Validation |
|
UNE-EN 13020:2016
|
Road surface treatment machines - Safety requirements |
|
UNE-EN 13418:2013
|
Plastics and rubber machines - Winding machines for film or sheet - Safety requirements |
|
UNE-EN 609-1:2017
|
Agricultural and forestry machinery - Safety of log splitters - Part 1: Wedge splitters |
|
I.S. EN 1870-11:2013
|
SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS) |
|
I.S. EN 13524:2003
|
HIGHWAY MAINTENANCE MACHINES - SAFETY REQUIREMENTS |
|
DIN EN 1915-1:2001-06
|
AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 1: BASIC SAFETY REQUIREMENTS |
|
I.S. EN 1870-8:2012
|
SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 8: SINGLE BLADE EDGING CIRCULAR RIP SAWING MACHINES WITH POWER DRIVEN SAW UNIT AND MANUAL LOADING AND/OR UNLOADING |
|
I.S. EN ISO 13849-2:2012
|
SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION (ISO 13849-2:2012) |
|
DIN EN ISO 3691-2:2017-02
|
Industrial trucks - Safety requirements and verification - Part 2: Self-propelled variable-reach trucks (ISO 3691-2:2016) (includes Corrigendum :2016) |
|
I.S. EN 289:2014
|
PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS |
|
I.S. EN 415-6:2013
|
SAFETY OF PACKAGING MACHINES - PART 6: PALLET WRAPPING MACHINES |
|
I.S. EN 1870-10:2013
|
SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES |
|
DIN EN 1908:2015-11
|
SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - TENSIONING DEVICES |
|
I.S. EN 1808:2015
|
SAFETY REQUIREMENTS FOR SUSPENDED ACCESS EQUIPMENT - DESIGN CALCULATIONS, STABILITY CRITERIA, CONSTRUCTION - EXAMINATIONS AND TESTS |
|
DIN EN 13524:2003-10
|
HIGHWAY MAINTENANCE MACHINES - SAFETY REQUIREMENTS |
|
I.S. EN 1870-12:2013
|
SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 12: PENDULUM CROSS-CUT SAWING MACHINES |
|
ONORM EN 16564 : 2015
|
MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES, INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS |
|
ONORM EN 12042 : JUN 2014
|
FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS |
|
EN 13524:2003+A2:2014
|
Highway maintenance machines - Safety requirements |
|
I.S. EN 1870-9:2012
|
SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 9: DOUBLE BLADE CIRCULAR SAWING MACHINES FOR CROSSCUTTING WITH INTEGRATED FEED AND WITH MANUAL LOADING AND/OR UNLOADING |
|
DIN EN 13463-5:2011-10
|
NON-ELECTRICAL EQUIPMENT INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 5: PROTECTION BY CONSTRUCTIONAL SAFETY 'C' |
|
EN 16564:2014
|
Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions |
|
I.S. EN 12750:2013
|
SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES |
|
I.S. EN 13852-1:2013
|
CRANES - OFFSHORE CRANES - PART 1: GENERAL - PURPOSE OFFSHORE CRANES |
|
DIN EN 13463-5:2004-03
|
NON-ELECTRICAL EQUIPMENT INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 5: PROTECTION BY CONSTRUCTIONAL SAFETY 'C' |
|
I.S. EN 1915-1:2013
|
AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 1: BASIC SAFETY REQUIREMENTS |
|
I.S. EN 1846-3:2013
|
FIREFIGHTING AND RESCUE SERVICE VEHICLES - PART 3: PERMANENTLY INSTALLED EQUIPMENT - SAFETY AND PERFORMANCE |
|
I.S. EN 12111:2014
|
TUNNELLING MACHINES - ROAD HEADERS AND CONTINUOUS MINERS - SAFETY REQUIREMENTS |
|
I.S. EN 1908:2015
|
SAFETY REQUIREMENTS OF CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - TENSIONING DEVICES |
|
I.S. EN 13418:2013
|
PLASTICS AND RUBBER MACHINES - WINDING MACHINES FOR FILM OR SHEET - SAFETY REQUIREMENTS |
|
I.S. EN 1114-1:2011
|
PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 1: SAFETY REQUIREMENTS FOR EXTRUDERS |
|
ONORM EN 15571 : 2015
|
MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES |
|
I.S. EN ISO 10472-1:2008
|
SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 1: COMMON REQUIREMENTS |
|
I.S. EN ISO 11111-1:2016
|
TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 1: COMMON REQUIREMENTS (ISO 11111-1:2016) |
|
I.S. EN 1870-15:2012
|
SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 15: MULTIBLADE CROSS-CUT SAWING MACHINES WITH INTEGRATED FEED OF THE WORKPIECE AND MANUAL LOADING AND/OR UNLOADING |
|
I.S. EN 1889-1:2011
|
MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES |
|
I.S. EN ISO 13849-1:2015
|
SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN (ISO 13849-1:2015) |
|
I.S. EN 609-1:2017
|
AGRICULTURAL AND FORESTRY MACHINERY - SAFETY OF LOG SPLITTERS - PART 1: WEDGE SPLITTERS |
|
DIN EN 13289:2013-05
|
PASTA PROCESSING PLANTS - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS |
|
EN 15571:2014
|
Machines and plants for mining and tooling of natural stone - Safety - Requirements for surface finishing machines |
|
I.S. EN 13870:2015
|
FOOD PROCESSING MACHINERY - PORTION CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
|
I.S. EN 940:2009
|
SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES |
|
I.S. EN 14044:2014
|
HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH SEQUENTIAL MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS |
|
I.S. EN 1417:2014
|
PLASTICS AND RUBBER MACHINES - TWO-ROLL MILLS - SAFETY REQUIREMENTS |
|
I.S. EN ISO 4254-1:2015
|
AGRICULTURAL MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS (ISO 4254-1:2013) |
|
I.S. EN 536:2015
|
ROAD CONSTRUCTION MACHINES - MIXING PLANTS FOR ROAD CONSTRUCTION MATERIALS - SAFETY REQUIREMENTS |
|
I.S. EN 1870-7:2012
|
SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 7: SINGLE BLADE LOG SAWING MACHINES WITH INTEGRATED FEED TABLE AND MANUAL LOADING AND/OR UNLOADING |
|
I.S. EN 12001:2012
|
CONVEYING, SPRAYING AND PLACING MACHINES FOR CONCRETE AND MORTAR - SAFETY REQUIREMENTS |
|
I.S. EN 1501-1:2011
|
REFUSE COLLECTION VEHICLES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 1: REAR LOADED REFUSE COLLECTION VEHICLES |
|
I.S. EN ISO 13850:2015
|
SAFETY OF MACHINERY - EMERGENCY STOP FUNCTION - PRINCIPLES FOR DESIGN (ISO 13850:2015) |
|
I.S. EN 1870-5:2002
|
SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAWBENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES |
|
DIN EN 609-1:2017-04
|
AGRICULTURAL AND FORESTRY MACHINERY - SAFETY OF LOG SPLITTERS - PART 1: WEDGE SPLITTERS |
|
I.S. EN 14359:2017
|
GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS |
|
I.S. EN 1870-4:2012
|
SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTIBLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING |
|
I.S. EN 13020:2015
|
ROAD SURFACE TREATMENT MACHINES - SAFETY REQUIREMENTS |
|
I.S. EN 13204:2016
|
DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS |
|
ONORM EN 16486 : 2014
|
MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS |
|
I.S. EN 1034-3:2011
|
SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 3: REREELERS AND WINDERS |
|
DIN EN ISO 16093:2017-10
|
Machine tools - Safety - Sawing machines for cold metal (ISO 16093:2017) |
|
ONORM EN ISO 28881 : 2013
|
MACHINE TOOLS - SAFETY - ELECTRO-DISCHARGE MACHINES (ISO 28881:2013) |
|
05/30105911 DC : DRAFT JUN 2005
|
ISO 20966 - AUTOMATIC MILKING SYSTEMS - PERFORMANCE REQUIREMENTS AND TESTING |
|
DIN EN 16474 E : 2015
|
PLASTICS AND RUBBER MACHINES - TYRE CURING PRESSES - SAFETY REQUIREMENTS |
|
UNI EN 15861 : 2012
|
FOOD PROCESSING MACHINERY - SMOKEHOUSES - SAFETY AND HYGIENE REQUIREMENTS |
|
UNI EN 16005 : 2012
|
POWER OPERATED PEDESTRIAN DOORSETS - SAFETY IN USE - REQUIREMENTS AND TEST METHODS |
|
UNI EN 691-1 : 2012
|
SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS |
|
DIN EN 16252:2013-03
|
Machines for compacting waste materials or recyclable fractions - Horizontal baling presses - Safety requirements |
|
DIN EN 15165:2015-01
|
FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
|
I.S. EN 1552:2003
|
UNDERGROUND MINING MACHINES - MOBILE EXTRACTING MACHINES AT THE FACE - SAFETY REQUIREMENTS FOR SHEARER LOADERS AND PLOUGH SYSTEMS |
|
14/30304022 DC : 0
|
BS ISO 7368 - HYDRAULIC FLUID POWER - TWO-PORT SLIP-IN CARTRIDGE VALVES - CAVITIES |
|
DIN EN ISO 80079-37:2016-12
|
Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres - Non-electrical type of protection constructional safety "c", control of ignition sources "b", liquid immersion "k" (ISO 80079-37:2016) |
|
09/30196817 DC : 0
|
BS ISO 11806-2 - AGRICULTURAL AND FORESTRY MACHINERY - SAFETY REQUIREMENTS AND TESTING FOR PORTABLE, HAND-HELD, POWERED BRUSH-CUTTERS AND GRASS-TRIMMERS - PART 2: MACHINES WITH BACKPACK POWER SOURCE |
|
I.S. EN 848-1:2007
|
SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES |
|
DIN EN ISO 18217:2015-12
|
Safety of woodworking machines - Edge-banding machines fed by chain(s) (ISO 18217:2015) |
|
PREN 13871 : DRAFT 2012
|
FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS |
|
PREN 13379 : DRAFT 2016
|
PASTA PROCESSING PLANT - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS |
|
PD ISO/TS 18409:2018
|
Hydraulic fluid power. Hose and hose assemblies. Method of collecting a fluid sample for analyzing the cleanliness of a hose or hose assembly |
|
ISO 26322-1:2008
|
Tractors for agriculture and forestry — Safety — Part 1: Standard tractors |
|
15/30296744 DC : 0
|
BS EN 12013 - PLASTICS AND RUBBER MACHINES - INTERNAL MIXERS - SAFETY REQUIREMENTS |
|
DIN EN 15467 E : 2015
|
FOOD PROCESSING MACHINERY - FISH HEADING AND FILLETING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
|
11/30247849 DC : 0
|
BS EN 12977-5 - THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 5: PERFORMANCE TEST METHODS FOR CONTROL EQUIPMENT |
|
BS ISO 13105-2 : 2014
|
BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - MACHINERY FOR CONCRETE SURFACE FLOATING AND FINISHING - PART 2: SAFETY REQUIREMENTS AND VERIFICATION |
|
BS ISO 19354:2016
|
Ships and marine technology. Marine cranes. General requirements |
|
DIN EN 1870-19 E : 2014
|
SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS |
|
ISO 4568:2006
|
Shipbuilding Sea-going vessels Windlasses and anchor capstans |
|
ISO/TR 10771-2:2008
|
Hydraulic fluid power Fatigue pressure testing of metal pressure-containing envelopes Part 2: Rating methods |
|
12/30253907 DC : DRAFT JULY 2012
|
BS EN 1807-1 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - TABLE BAND SAWS AND BAND RE-SAWS |
|
DIN EN 15571:2015-03
|
Machines and plants for mining and tooling of natural stone - Safety - Requirements for surface finishing machines |
|
BS EN 12999 : 2011
|
CRANES - LOADER CRANES |
|
DIN EN 16005:2013-01
|
Power operated pedestrian doorsets - Safety in use - Requirements and test methods |
|
PREN 14492-1 : DRAFT 2015
|
CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
|
BS EN 1807-2:2013
|
Safety of woodworking machines. Band sawing machines Log sawing machines |
|
11/30243078 DC : 0
|
BS EN 1034-16 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 16: PAPER AND BOARD MAKING MACHINES |
|
14/30285733 DC : 0
|
BS EN ISO 16092-1 - MACHINE TOOLS SAFETY - PRESSES - PART 1: GENERAL SAFETY REQUIREMENTS |
|
14/30263884 DC : 0
|
BS EN ISO 16093 - MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL |
|
BS EN 15467:2014
|
Food processing machinery. Fish heading and filleting machines. Safety and hygiene requirements |
|
I.S. EN ISO 11806-2:2011
|
AGRICULTURAL AND FORESTRY MACHINERY - SAFETY REQUIREMENTS AND TESTING FOR PORTABLE, HAND-HELD, POWERED BRUSH-CUTTERS AND GRASS-TRIMMERS - PART 2: MACHINES FOR USE WITH BACK-PACK POWER UNIT (ISO 11806-2:2011) |
|
PREN 13204 : DRAFT 2015
|
DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS |
|
17/30317170 DC : 0
|
BS EN ISO 20430 - PLASTICS AND RUBBER MACHINES - INJECTION MOULDING MACHINES - SAFETY REQUIREMENTS |
|
16/30354071 DC : 0
|
BS EN 62282-3-100 - FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
|
UNI ISO 17165-1 : 2012
|
HYDRAULIC FLUID POWER - HOSE ASSEMBLIES - PART 1: DIMENSIONS AND REQUIREMENTS |
|
UNI EN 16228-6 : 2014
|
ATTREZZATURE PER PERFORAZIONI E FONDAZIONI - SICUREZZA - PARTE 6: ATTREZZATURE PER JETTING, CEMENTAZIONE E INIEZIONE |
|
15/30329716 DC
|
BS EN 13289. Pasta processing plants. Dryers and coolers. Safety and hygiene requirements |
|
UNI EN ISO 8230-1 : 2009
|
SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS |
|
BS ISO 10771-1:2015
|
Hydraulic fluid power. Fatigue pressure testing of metal pressure-containing envelopes Test method |
|
DIN EN 1570-2 E : 2017
|
SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 2: LIFTING TABLES SERVING MORE THAN 2 FIXED LANDINGS OF A BUILDING, FOR LIFTING GOODS WITH A VERTICAL TRAVEL SPEED NOT EXCEEDING 0,15 M/S |
|
DIN EN 16228-6:2014-10
|
Drilling and foundation equipment - Safety - Part 6: Jetting, grouting and injection equipment |
|
11/30249027 DC : 0
|
BS ISO 15442 - CRANES - SAFETY REQUIREMENTS FOR LOADER CRANES |
|
DIN EN 16246:2013-04
|
Agricultural machinery - Backhoes - Safety |
|
07/30161523 DC : 0
|
BS ISO 26322-1 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY - PART 1: STANDARD TRACTORS |
|
BS EN 1570-1 : 2011
|
SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 1: LIFTING TABLES SERVING UP TO TWO FIXED LANDINGS |
|
BS PD ISO/TR 22100-1 : 2015
|
SAFETY OF MACHINERY - RELATIONSHIP WITH ISO 12100 - PART 1: HOW ISO 12100 RELATES TO TYPE-B AND TYPE-C STANDARDS |
|
14/30297793 DC : 0
|
BS EN ISO 19085-3 - WOODWORKING MACHINES - SAFETY REQUIREMENTS - PART 3: NC BORING AND ROUTING MACHINES |
|
BS EN 15165:2014
|
Food processing machinery. Forming machines. Safety and hygiene requirements |
|
DIN EN 1870-18:2013-08
|
SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS |
|
BS ISO 18289:2014
|
Ships and marine technology. Navigation and shallow-water engineering vessels. Anchor winches |
|
BS EN 1034-17:2012
|
Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines Tissue making machines |
|
BS EN 1807-1:2013
|
Safety of woodworking machines. Band sawing machines Table band saws and band re-saws |
|
BS EN ISO 13856-2:2013
|
Safety of machinery. Pressure-sensitive protective devices General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars |
|
I.S. EN 15949:2012
|
SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR BAR MILLS, STRUCTURAL STEEL MILLS AND WIRE ROD MILLS |
|
DIN EN 16743:2016-05
|
FOOD PROCESSING MACHINERY - AUTOMATIC INDUSTRIAL SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
|
BS EN 1034-21:2012
|
Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines Coating machines |
|
CEI EN 62282-3-100 : 2012
|
FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
|
DIN EN 16191:2014-09
|
TUNNELLING MACHINERY - SAFETY REQUIREMENTS |
|
10/30214958 DC : 0
|
BS EN 1915-1 - AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 1: BASIC SAFETY REQUIREMENTS |
|
BS ISO 17165-1:2007
|
Hydraulic fluid power. Hose assemblies Dimensions and requirements |
|
BS ISO 5598:2008
|
Fluid power systems and components. Vocabulary |
|
DIN EN ISO 10218-2:2012-06
|
Robots and robotic devices - Safety requirements for industrial robots - Part 2: Robot systems and integration (ISO 10218-2:2011) |
|
UNE-EN 16564:2015
|
Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions |
|
UNE-EN 16474:2015
|
Plastics and rubber machines - Tyre curing machines - Safety requirements |
|
DIN EN 16228-1:2014-10
|
Drilling and foundation equipment - Safety - Part 1: Common requirements; German version EN 16228-1:2014 |
|
I.S. EN 1034-16:2012
|
SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 16: PAPER AND BOARD MAKING MACHINES |
|
BS EN 1012-3:2013
|
Compressors and vacuum pumps. Safety requirements Process compressors |
|
DIN EN 16474:2015-08
|
PLASTICS AND RUBBER MACHINES - TYRE CURING PRESSES - SAFETY REQUIREMENTS |
|
BS ISO 21789:2009
|
Gas turbine applications — Safety |
|
ANSI/CSA FC 1:2014
|
FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
|
UNE-EN 1807-1:2013
|
Safety of woodworking machines - Band sawing machines - Part 1: Table band saws and band re-saws |
|
DIN EN 415-10:2014-07
|
SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS |
|
A-A-59384 Revision B:2014
|
PRESS, 'H' FRAME, HYDRAULIC |
|
EN 16252:2012
|
Machines for compacting waste materials or recyclable fractions - Horizontal baling presses - Safety requirements |
|
BS ISO 7368:2016
|
Hydraulic fluid power. Two-port slip-in cartridge valves. Cavities |
|
ISO 16092-3:2017
|
Machine tools safety — Presses — Part 3: Safety requirements for hydraulic presses |
|
UNI EN 1034-8 : 2012
|
SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 8: REFINING PLANTS |
|
ISO 9386-1:2000
|
Power-operated lifting platforms for persons with impaired mobility — Rules for safety, dimensions and functional operation — Part 1: Vertical lifting platforms |
|
15/30304107 DC : DRAFT MAY 2015
|
BS EN 13684 - GARDEN EQUIPMENT - PEDESTRIAN CONTROLLED LAWN AERATORS AND SCARIFIERS - SAFETY |
|
DIN EN ISO 3691-2:2016-10
|
INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SELF-PROPELLED VARIABLE-REACH TRUCKS (ISO 3691-2:2016) |
|
I.S. EN 1459-2:2015
|
ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SLEWING VARIABLE-REACH TRUCKS |
|
I.S. EN 16246:2012
|
AGRICULTURAL MACHINERY - BACKHOES - SAFETY |
|
S.R. CEN ISO/TR 22100-1:2017
|
SAFETY OF MACHINERY - RELATIONSHIP WITH ISO 12100 - PART 1: HOW ISO 12100 RELATES TO TYPE-B AND TYPE-C STANDARDS (ISO/TR 22100-1:2015) |
|
I.S. EN 1570-2:2016
|
SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 2: LIFTING TABLES SERVING MORE THAN 2 FIXED LANDINGS OF A BUILDING, FOR LIFTING GOODS WITH A VERTICAL TRAVEL SPEED NOT EXCEEDING 0,15 M/S |
|
UNI EN 1807-2 : 2013
|
SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 2: LOG SAWING MACHINES |
|
I.S. EN 15572:2015
|
MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES |
|
BS EN ISO 11850 : 2011
|
MACHINERY FOR FORESTRY - GENERAL SAFETY REQUIREMENTS |
|
NF EN ISO 10218-2 : 2011
|
ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR INDUSTRIAL ROBOTS - PART 2: ROBOT SYSTEM AND INTEGRATION |
|
ONORM EN 1501-1 : 2015
|
REFUSE COLLECTION VEHICLES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS PART 1: REAR LOADED REFUSE COLLECTION VEHICLES |
|
I.S. EN 15467:2014
|
FOOD PROCESSING MACHINERY - FISH HEADING AND FILLETING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
|
UNI EN 415-10 : 2014
|
SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS |
|
ISO 13122:2011
|
Ships and marine technology — Launching appliances for davit-launched liferafts |
|
UNE-EN ISO 10218-2:2011
|
Robots and robotic devices - Safety requirements for industrial robots - Part 2: Robot systems and integration (ISO 10218-2:2011) |
|
DIN EN 12453:2005-05 (Draft)
|
INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY IN USE OF POWER OPERATED DOORS - REQUIREMENTS AND TEST METHODS |
|
I.S. EN ISO 13856-2:2013
|
SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE EDGES AND PRESSURE-SENSITIVE BARS (ISO 13856-2:2013) |
|
I.S. EN 16774:2016
|
SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STEEL CONVERTER AND ASSOCIATED EQUIPMENT |
|
UNI EN 12977-5 : 2012
|
THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 5: PERFORMANCE TEST METHODS FOR CONTROL EQUIPMENT |
|
16/30338566 DC : 2016-06
|
BS EN 13379 - PASTA PROCESSING PLANT - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS |
|
I.S. EN 1034-21:2012
|
SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 21: COATING MACHINES |
|
EN ISO 19225:2017
|
Underground mining machines - Mobile extracting machines at the face - Safety requirements for shearer loaders and plough systems (ISO 19225:2017) |
|
I.S. EN ISO 16093:2017
|
MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL (ISO 16093:2017) |
|
BS EN ISO 16089:2015
|
Machine tools. Safety. Stationary grinding machines |
|
17/30364338 DC : 0
|
BS EN 1009-1 - MACHINES FOR MECHANICAL PROCESSING OF MINERALS AND SIMILAR SOLID MATERIALS - SAFETY - PART 1: COMMON REQUIREMENTS FOR PARTLY COMPLETED MACHINERY AND PROCESSING PLANTS |
|
UNE-EN ISO 23125:2015
|
Machine tools - Safety - Turning machines (ISO 23125:2015, Corrected version 2016-03-15) |
|
ISO 5598:2008
|
Fluid power systems and components Vocabulary |
|
I.S. EN 12013:2018
|
PLASTICS AND RUBBER MACHINES - INTERNAL MIXERS - SAFETY REQUIREMENTS |
|
I.S. EN 1501-5:2011
|
REFUSE COLLECTION VEHICLES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 5: LIFTING DEVICES FOR REFUSE COLLECTION VEHICLES |
|
PREN 12978 : DRAFT 2017
|
INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY DEVICES FOR POWER OPERATED DOORS AND GATES - REQUIREMENTS AND TEST METHODS |
|
PREN 609-1 : DRAFT 2014
|
AGRICULTURAL AND FORESTRY MACHINERY - SAFETY OF LOG SPLITTERS - PART 1: WEDGE SPLITTERS |
|
UNI EN 1034-16 : 2012
|
SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 16: PAPER AND BOARD MAKING MACHINES |
|
ISO 21628:2008
|
Gardening machinery Powered material-collecting systems Safety |
|
PREN 1459-1 : DRAFT 2014
|
ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 1: VARIABLE-REACH TRUCKS |
|
PREN 12301 : DRAFT 2015
|
PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS |
|
EN ISO 19085-1:2017/AC:2018
|
WOODWORKING MACHINES - SAFETY - PART 1: COMMON REQUIREMENTS (ISO 19085-1:2017) |
|
EN ISO 19085-5:2017
|
Woodworking machines - Safety - Part 5: Dimension saws (ISO 19085-5:2017) |
|
EN 1459-2:2015
|
Rough-terrain trucks - Safety requirements and verification - Part 2: Slewing variable-reach trucks |
|
ISO 10972-1:1998
|
Cranes — Requirements for mechanisms — Part 1: General |
|
ISO 19372:2015
|
Microturbines applications — Safety |
|
ISO 19354:2016
|
Ships and marine technology — Marine cranes — General requirements |
|
ISO 6020-3:2015
|
Hydraulic fluid power — Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series — Part 3: Compact series with bores from 250 mm to 500 mm |
|
ISO 17842-2:2015
|
Safety of amusement rides and amusement devices Part 2: Operation and use |
|
ISO 7368:2016
|
Hydraulic fluid power — Two-port slip-in cartridge valves — Cavities |
|
UNE-EN 13135:2013
|
Cranes - Safety - Design - Requirements for equipment |
|
EN ISO/IEC 80079-38:2016
|
Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38:2016) |
|
ISO 16110-1:2007
|
Hydrogen generators using fuel processing technologies Part 1: Safety |
|
ISO 17842-1:2015
|
Safety of amusement rides and amusement devices — Part 1: Design and manufacture |
|
ISO/TR 17529:2014
|
Machine tools Practical guidance and example of risk assessment on electro-discharge machines |
|
UNE-EN 14359:2017
|
Gas-loaded accumulators for fluid power applications |
|
ISO 6020-2:2015
|
Hydraulic fluid power Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series Part 2: Compact series |
|
ISO 15516:2006
|
Ships and marine technology Launching appliances for davit-launched lifeboats |
|
DIN EN 1870-11:2014-02
|
SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS) |
|
DIN EN 12750:2013-05
|
Safety of woodworking machines - Four sided moulding machines |
|
DIN EN ISO 10472-1:2009-10
|
Safety requirements for industrial laundry machinery - Part 1: Common requirements (ISO 10472-1:1997) |
|
DIN EN 1808:2015-08
|
SAFETY REQUIREMENTS FOR SUSPENDED ACCESS EQUIPMENT - DESIGN CALCULATIONS, STABILITY CRITERIA, CONSTRUCTION - EXAMINATIONS AND TESTS |
|
DIN EN 1870-15:2013-01
|
Safety of woodworking machines - Circular sawing machines - Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading |
|
DIN EN 13020:2016-02
|
ROAD SURFACE TREATMENT MACHINES - SAFETY REQUIREMENTS |
|
DIN EN 848-3:2013-01
|
SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOLS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES |
|
DIN EN 848-1:2013-01
|
SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES |
|
DIN EN 13870:2015-12
|
Food processing machinery - Portion cutting machines - Safety and hygiene requirements |
|
DIN EN 848-2:2013-01
|
SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES |
|
BS EN 848-1 : 2007
|
SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES |
|
UNE-EN 15954-2:2014
|
Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements |
|
BS EN ISO 11680-2:2011
|
Machinery for forestry. Safety requirements and testing for pole-mounted powered pruners Machines for use with backpack power source |
|
BS EN 1417:2014
|
Plastics and rubber machines. Two-roll mills. Safety requirements |
|
UNE-EN 1889-1:2012
|
Machines for underground mines - Mobile machines working underground - Safety - Part 1: Rubber tyred vehicles |
|
UNE-EN 15955-2:2014
|
Railway applications - Track - Demountable machines and associated equipment - Part 2: General safety requirements |
|
BS EN 861 : 2007
|
SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES |
|
BS EN 848-2 : 2007
|
SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES |
|
UNE-EN 13204:2017
|
Double acting hydraulic rescue tools for fire and rescue service use - Safety and performance requirements |
|
BS EN 1034-3:2011
|
Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines Rereelers and winders |
|
DIN EN 1889-1:2011-10
|
MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES |
|
ISO 12100:2010
|
Safety of machinery — General principles for design — Risk assessment and risk reduction |
|
OVE/ONORM EN 62282-3-100 : 2013
|
FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-3-100:2012) |
|
UNE-EN 848-1:2008
|
Safety of woodworking machines - One side moulding machines with rotating tool - Part 1: Single spindle vertical moulding machines |
|
UNI EN 13525 : 2010
|
FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY |
|
CSA C22.2 No. 272 : 2014
|
WIND TURBINE ELECTRICAL SYSTEMS |
|
UNE-EN 13463-5:2013
|
Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: Protection by constructional safety 'c' |
|
UNE-EN 848-3:2013
|
Safety of woodworking machines - One side moulding machines with rotating tool - Part 3: Numerically controlled (NC) boring and routing machines |
|
I.S. EN 848-2:2007
|
SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES |
|
EN 16486:2014
|
Machines for compacting waste materials or recyclable fractions - Compactors - Safety requirements |
|
EN ISO 8230-1:2008
|
Safety requirements for dry-cleaning machines - Part 1: Common safety requirements (ISO 8230-1:2008) |
|
EN ISO 6115 : 1996
|
Shipbuilding - Trawl winches (ISO 6115:1988) |
|
EN 1870-15:2012
|
Safety of woodworking machines - Circular sawing machines - Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading |
|
EN 1846-3:2013
|
Firefighting and rescue service vehicles - Part 3: Permanently installed equipment - Safety and performance |
|
EN 982:1996+A1:2008
|
Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics |
|
EN ISO 16093:2017
|
Machine tools - Safety - Sawing machines for cold metal (ISO 16093:2017) |
|
UNI EN 12001 : 2012
|
CONVEYING, SPRAYING AND PLACING MACHINES FOR CONCRETE AND MORTAR - SAFETY REQUIREMENTS |
|
UNI EN 1846-3 : 2013
|
FIREFIGHTING AND RESCUE SERVICE VEHICLES - PART 3: PERMANENTLY INSTALLED EQUIPMENT - SAFETY AND PERFORMANCE |
|
ONORM EN 16228-6 : 2014
|
DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 6: JETTING, GROUTING AND INJECTION EQUIPMENT |
|
UNI EN 1870-8 : 2013
|
SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 8: SINGLE BLADE EDGING CIRCULAR RIP SAWING MACHINES WITH POWER DRIVEN SAW UNIT AND MANUAL LOADING AND/OR UNLOADING |
|
UNI EN 1889-1 : 2011
|
MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES |
|
ONORM EN 16228-1 : 2014
|
DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 1: COMMON REQUIREMENTS |
|
UNI EN 1870-15 : 2012
|
SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 15: MULTI-BLADE CROSS-CUT SAWING MACHINES WITH INTEGRATED FEED OF THE WORKPIECE AND MANUAL LOADING AND/OR UNLOADING |
|
UNI EN 15954-2 : 2013
|
RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
|
UNI EN 848-3 : 2012
|
SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES |
|
UNI EN 12750 : 2013
|
SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES |
|
UNI EN 1114-1 : 2011
|
PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 1: SAFETY REQUIREMENTS FOR EXTRUDERS |
|
UNI EN ISO 12100-2 : 2009
|
SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES |
|
UNI EN 860 : 2012
|
SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANNING MACHINES |
|
UNI EN 815 : 2009
|
SAFETY OF UNSHIELDED TUNNEL BORING MACHINES AND RODLESS SHAFT BORING MACHINES FOR ROCK - SAFETY REQUIREMENTS |
|
UNI EN 415-6 : 2013
|
SAFETY OF PACKAGING MACHINES - PART 6: PALLET WRAPPING MACHINES |
|
UNI EN 13871 : 2014
|
FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS |
|
UNI EN 13463-5 : 2011
|
NON-ELECTRICAL EQUIPMENT INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 5: PROTECTION BY CONSTRUCTIONAL SAFETY 'C' |
|
UNI EN 1012-3 : 2014
|
COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS |
|
UNI EN 13418 : 2013
|
PLASTICS AND RUBBER MACHINES - WINDING MACHINES FOR FILM OR SHEET - SAFETY REQUIREMENTS |
|
UNI EN 859 : 2012
|
SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANING MACHINES |
|
UNI EN 848-1 : 2013
|
SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES |
|
ONORM EN ISO 11680-2 : 2012
|
MACHINERY FOR FORESTRY - SAFETY REQUIREMENTS AND TESTING FOR POLE-MOUNTED POWERED PRUNERS - PART 2: MACHINES FOR USE WITH BACK-PACK POWER SOURCE (ISO 11680-2:2011) |
|
UNI EN 1870-4 : 2012
|
SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTIBLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING |
|
UNI EN 1915-1 : 2014
|
AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 1: BASIC SAFETY REQUIREMENTS |
|
EN 1870-11:2013
|
Safety of woodworking machines - Circular sawing machines - Part 11: Semi automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws) |
|
UNI EN 1870-9 : 2012
|
SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 9: DOUBLE BLADE CIRCULAR SAWING MACHINES FOR CROSS-CUTTING WITH INTEGRATED FEED AND WITH MANUAL LOADING AND/OR UNLOADING |
|
UNI EN 1870-12 : 2014
|
SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 12: PENDULUM CROSS-CUT SAWING MACHINES |
|
EN 1034-27:2012
|
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 27: Roll handling systems |
|
EN 860:2007+A2:2012
|
Safety of woodworking machines - One side thickness planing machines |
|
UNI EN 1870-10 : 2013
|
SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES |
|
UNI EN 1870-11 : 2013
|
SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS) |
|
UNI EN 13852-1 : 2013
|
CRANES - OFFSHORE CRANES - PART 1: GENERAL-PURPOSE OFFSHORE CRANES |
|
UNI EN 982 : 2009
|
SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - HYDRAULICS |
|
UNI EN 848-2 : 2013
|
SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES |
|
EN 13204:2016
|
Double acting hydraulic rescue tools for fire and rescue service use - Safety and performance requirements |
|
UNI EN 12111 : 2014
|
TUNNELLING MACHINES - ROAD HEADERS AND CONTINUOUS MINERS - SAFETY REQUIREMENTS |
|
UNI EN 13289 : 2013
|
PASTA PROCESSING PLANTS - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS |
|
UNI EN ISO 10472-1 : 2009
|
SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 1: COMMON REQUIREMENTS |
|
UNI EN 14043 : 2014
|
HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH COMBINED MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS |
|
UNI EN 15955-2 : 2013
|
RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
|
UNI EN 861 : 2012
|
SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES |
|
UNI EN ISO 13849-2 : 2013
|
SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION |
|
UNI EN 940 : 2012
|
SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES |
|
UNI EN 14044 : 2014
|
HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH SEQUENTIAL MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS |
|
UNI EN 1034-3 : 2012
|
SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 3: REREELERS AND WINDERS |
|
UNI EN 1870-5 : 2012
|
SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAWBENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES |
|
UNI EN 289 : 2014
|
PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS |
|
UNI EN 1870-7:2012
|
Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading |
|
I.S. EN ISO 10218-2:2011
|
ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR INDUSTRIAL ROBOTS - PART 2: ROBOT SYSTEMS AND INTEGRATION |
|
DIN EN 15572 E : 2015
|
MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES |
|
UNI EN 1807-1 : 2013
|
SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS |
|
BS EN 16564:2014
|
Machines and plants for mining and tooling of natural stone. Safety. Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions |
|
ANSI B11.25 : 2015
|
SAFETY REQUIREMENTS FOR LARGE MACHINES |
|
DIN EN ISO/IEC 80079-38 E : 2017
|
EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079-38:2016) |
|
ISO 12140:2013
|
Agricultural machinery Agricultural trailers and trailed equipment Drawbar jacks |
|
BS EN 16228-6:2014
|
Drilling and foundation equipment. Safety Jetting, grouting and injection equipment |
|
ONORM EN 12999 : 2013
|
CRANES - LOADER CRANES |
|
BS EN ISO 10218-2:2011
|
Robots and robotic devices. Safety requirements for industrial robots Robot systems and integration |
|
BS ISO 16301:2017
|
Rubber and plastics hoses and hose assemblies, wire- or textile-reinforced, for manually operated hydraulic jacks. Specification |
|
DIN EN 16191 E : 2014
|
TUNNELLING MACHINERY - SAFETY REQUIREMENTS |
|
BS ISO 19224:2017
|
Continuous surface miners (CSM). Safety requirements |
|
BS EN 15949:2012
|
Safety of machinery. Safety requirements for bar mills, structural steel mills and wire rod mills |
|
BS EN ISO 19085-5:2017
|
Woodworking machines. Safety Dimension saws |
|
14/30274168 DC : 0
|
BS ISO 6020-3 - HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR SINGLE ROD CYLINDERS, 16 MPA (160 BAR) SERIES - PART 3: COMPACT SERIES WITH BORES FROM 250 MM TO 500 MM |
|
12/30244783 DC : 0
|
BS EN ISO 13856-3 - SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES |
|
UNI EN ISO 13856-2 : 2013
|
SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE EDGES AND PRESSURE-SENSITIVE BARS |
|
ISO 10762:2015
|
Hydraulic fluid power Mounting dimensions for cylinders, 10 MPa (100 bar) series |
|
PREN 12013 : DRAFT 2015
|
PLASTICS AND RUBBER MACHINES - INTERNAL MIXERS - SAFETY REQUIREMENTS |
|
DIN EN 1870-19:2014-03
|
SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS |
|
UNE-EN 62282-3-1:2011
|
Fuel cell technologies - Part 3-1: Stationary fuel cell power systems - Safety |
|
DIN EN 1570-2:2014-06 (Draft)
|
SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 2: LIFTING TABLES SERVING MORE THAN 2 FIXED LANDINGS OF A BUILDING, FOR LIFTING GOODS WITH A VERTICAL TRAVEL SPEED NOT EXCEEDING 0,15 M/S |
|
I.S. EN 848-3:2012
|
SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES |
|
15/30294686 DC : 0
|
BS ISO 19354 - SHIPS AND MARINE TECHNOLOGY - MARINE CRANES - GENERAL REQUIREMENTS |
|
UNI EN 1501-5 : 2011
|
REFUSE COLLECTION VEHICLES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 5: LIFTING DEVICES FOR REFUSE COLLECTION VEHICLES |
|
UNI EN 1034-17 : 2012
|
SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 17: TISSUE MAKING MACHINES |
|
11/30227089 DC : 0
|
BS EN 1034-3 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 3: REREELERS AND WINDERS |
|
ISO/TR 18569:2004
|
Safety of machinery Guidelines for the understanding and use of safety of machinery standards |
|
DIN EN 15572:2015-12
|
MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES |
|
DIN EN 1501-5:2012-02
|
Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles |
|
07/30166811 DC : 0
|
BS EN ISO 23125 - SAFETY OF MACHINE TOOLS - TURNING MACHINES |
|
14/30302140 DC : 0
|
BS EN 1459-1 - ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 1: VARIABLE-REACH TRUCKS |
|
14/30302903 DC : 0
|
BS EN 16774 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STEEL CONVERTER AND ASSOCIATED EQUIPMENT |
|
I.S. EN 16743:2016
|
FOOD PROCESSING MACHINERY - AUTOMATIC INDUSTRIAL SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
|
PREN 13684 : DRAFT 2015
|
GARDEN EQUIPMENT - PEDESTRIAN CONTROLLED LAWN AERATORS AND SCARIFIERS - SAFETY |
|
BS EN 1501-5:2011
|
Refuse collection vehicles. General requirements and safety requirements Lifting devices for refuse collection vehicles |
|
BS EN 1570-2:2016
|
Safety requirements for lifting tables Lifting tables serving more than 2 fixed landings of a building, for lifting goods with a vertical travel speed not exceeding 0,15 m/s |
|
17/30332527 DC : DRAFT JAN 2017
|
BS EN 1459-5 - ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 5 - ATTACHMENTS AND ATTACHMENT INTERFACE |
|
BS EN 15906:2011
|
Winter maintenance equipment. Snow removal machines with rotating tools. Specification and clearing capacity |
|
I.S. EN 1870-6:2017
|
SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIRE WOOD |
|
14/30310338 DC : 0
|
BS EN 609-1 - AGRICULTURAL AND FORESTRY MACHINERY - SAFETY OF LOG SPLITTERS - PART 1: WEDGE SPLITTERS |
|
BS EN 1870-18:2013
|
Safety of woodworking machines. Circular sawing machines Dimension saws |
|
UNE-EN 15163:2018
|
Machines and installations for the exploitation and processing of natural stone - Safety - Requirements for diamond wire saws |
|
12/30243081 DC : 0
|
BS EN 1034-17 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 17: TISSUE MAKING MACHINES |
|
13/30257309 DC : 0
|
BS EN 1459-2 - ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SLEWING VARIABLE-REACH TRUCKS |
|
ISO 8626:1989
|
Servo-hydraulic test equipment for generating vibration — Method of describing characteristics |
|
BS ISO 4568:2006
|
Shipbuilding. Sea-going vessels. Windlasses and anchor capstans |
|
ISO 18289:2014
|
Ships and marine technology — Navigation and shallow-water engineering vessels — Anchor winches |
|
BS EN 415-10:2014
|
Safety of packaging machines General Requirements |
|
DIN ISO 3730:2013-12
|
SHIPBUILDING AND MARINE STRUCTURES - MOORING WINCHES (ISO 3730:2012) |
|
09/30196676 DC : DRAFT OCT 2009
|
BS ISO 1219-2 - FLUID POWER SYSTEMS AND COMPONENTS - GRAPHIC SYMBOLS AND CIRCUIT DIAGRAMS - PART 2: CIRCUIT DIAGRAMS |
|
DIN EN 14033-3:2014-08 (Draft)
|
RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS |
|
BS ISO 17842-2:2015
|
Safety of amusement rides and amusement devices Operation and use |
|
11/30232159 DC : 0
|
BS EN ISO 4254-1 - AGRICULTURAL MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
|
UNE-EN 1570-2:2017
|
Safety requirements for lifting tables - Part 2: Lifting tables serving more than 2 fixed landings of a building, for lifting goods with a vertical travel speed not exceeding 0,15 m/s |
|
BS EN ISO 16093:2017
|
Machine tools. Safety. Sawing machines for cold metal |
|
12/30255089 DC : 0
|
BS EN 16474 - PLASTICS AND RUBBER MACHINES - TYRE CURING PRESSES - SAFETY REQUIREMENTS |
|
09/30201664 DC : 0
|
BS EN ISO 12100 - SAFETY OF MACHINERY - GENERAL PRINCIPLES FOR DESIGN, RISK ASSESSMENT AND RISK REDUCTION |
|
15/30302205 DC : DRAFT FEB 2015
|
BS EN ISO 19296 - MINING AND EARTHMOVING MACHINERY - MOBILE MACHINES WORKING UNDERGROUND - MACHINE SAFETY |
|
12/30268301 DC : 0
|
BS EN 16486 - MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS |
|
I.S. EN 16005:2012
|
POWER OPERATED PEDESTRIAN DOORSETS - SAFETY IN USE - REQUIREMENTS AND TEST METHODS |
|
UNE-EN ISO 13482:2014
|
Robots and robotic devices - Safety requirements for personal care robots (ISO 13482:2014) |
|
DIN EN 1034-17 E : 2012
|
SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 17: TISSUE MAKING MACHINES |
|
DIN EN 15571 E : 2015
|
MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES |
|
DIN EN ISO 16093:2014-03 (Draft)
|
MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL (ISO 16093:2017) |
|
14/30293310 DC : 0
|
BS EN ISO 19085-1 - WOODWORKING MACHINES - SAFETY - PART 1: COMMON REQUIREMENTS |
|
14/30304361 DC : 0
|
BS EN ISO 11111-1 - TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 1: COMMON REQUIREMENTS |
|
PREN 15180 : DRAFT 2011
|
FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS |
|
DIN EN ISO 16093 E : 2017
|
MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL (ISO 16093:2017) |
|
BS 6331-4:1985
|
Mounting dimensions of single rod double acting hydraulic cylinders. Specification for 63 bar series, including associated components |
|
08/30187323 DC : DRAFT JULY 2008
|
BS ISO 21873-2 - BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - MOBILE CRUSHERS - PART 2: SAFETY REQUIREMENTS |
|
DIN EN 1034-27:2012-12
|
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 27: Roll handling systems |
|
PREN 1034-3 : DRAFT 2011
|
SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 3: REREELERS AND WINDERS |
|
BS EN 1870-6:2017
|
Safety of woodworking machines. Circular sawing machines Circular sawing machines for fire wood |
|
05/30137922 DC : DRAFT AUG 2005
|
ISO 13865-3 - SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES |
|
DIN EN 1034-17:2012-11
|
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 17: Tissue making machines |
|
BS ISO 7825:2017
|
Shipbuilding. Deck machinery. General requirements |
|
BS EN ISO 13482:2014
|
Robots and robotic devices. Safety requirements for personal care robots |
|
DIN EN 16500:2014-10
|
MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS |
|
DIN EN 1034-27 E : 2012
|
SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 27: ROLL HANDLING SYSTEMS |
|
12/30260299 DC : 0
|
BS EN 15165 - FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
|
BS ISO 26322-1:2008
|
Tractors for agriculture and forestry. Safety Standard tractors |
|
11/30251974 DC : 0
|
BS EN 15180 - FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS |
|
BS EN ISO 23125:2015
|
Machine tools. Safety. Turning machines |
|
BS EN 15955-2:2013
|
Railway applications. Track. Demountable machines and associated equipment General safety requirements |
|
94/713480 DC : DRAFT NOV 1994
|
PREN 1710 - MACHINES FOR UNDERGROUND MINES - REQUIREMENTS FOR APPLICATIONS IN AREAS OF MINES WITH FIREDAMP HAZARD - SAFETY REQUIREMENTS |
|
CSA Z434 : 2014
|
INDUSTRIAL ROBOTS AND ROBOT SYSTEMS |
|
NF EN ISO 11806-2 : 2012
|
AGRICULTURAL AND FORESTRY MACHINERY - SAFETY REQUIREMENTS AND TESTING FOR PORTABLE HAND-HELD POWERED BRUSH-CUTTERS AND GRASS-TRIMMERS - PART 2: MACHINES WITH BACK-PACK POWER SOURCE |
|
BS EN 1034-27:2012
|
Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines Roll handling systems |
|
I.S. EN 12977-5:2012
|
THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 5: PERFORMANCE TEST METHODS FOR CONTROL EQUIPMENT |
|
UNE-EN 16228-6:2015
|
Drilling and foundation equipment - Safety - Part 6: Jetting, grouting and injection equipment |
|
PREN 13525 : DRAFT 2016
|
FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY |
|
I.S. EN ISO 19225:2017
|
UNDERGROUND MINING MACHINES - MOBILE EXTRACTING MACHINES AT THE FACE - SAFETY REQUIREMENTS FOR SHEARER LOADERS AND PLOUGH SYSTEMS (ISO 19225:2017) |
|
BS EN 15163:2017
|
Machines and installations for the exploitation and processing of natural stone. Safety. Requirements for diamond wire saws |
|
ISO 16301:2017
|
Rubber and plastics hoses and hose assemblies, wire- or textile-reinforced, for manually operated hydraulic jacks — Specification |
|
UNI EN 16246 : 2013
|
AGRICULTURAL MACHINERY - BACKHOES - SAFETY |
|
04/30086349 DC : DRAFT APR 2004
|
EN ISO 13849-1 - SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN |
|
UNI EN 1870-18 : 2014
|
SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS |
|
ANSI B11.8:2001(R2012)
|
SAFETY REQUIREMENTS FOR MANUAL MILLING, DRILLING AND BORING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL |
|
ISO 14955-1:2017
|
Machine tools — Environmental evaluation of machine tools — Part 1: Design methodology for energy-efficient machine tools |
|
UNE-EN 1807-2:2013
|
Safety of woodworking machines - Band sawing machines - Part 2: Log sawing machines |
|
BS ISO 20966:2007
|
Automatic milking installations. Requirements and testing |
|
ANSI B11.6 : 2001 : R2007
|
SAFETY REQUIREMENTS FOR MANUAL TURNING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL |
|
DIN EN 16500 E : 2014
|
MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS |
|
DIN EN ISO 8230-1:2009-05
|
SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS |
|
BS EN 16774:2016
|
Safety of machinery. Safety requirements for steel converter and associated equipment |
|
BS ISO 1219-3:2016
|
Fluid power systems and components. Graphical symbols and circuit diagrams Symbol modules and connected symbols in circuit diagrams |
|
DIN EN 1034-26:2012-06
|
SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 26: ROLL PACKAGING MACHINES |
|
ISO 3730:2012
|
Shipbuilding and marine structures — Mooring winches |
|
BS EN 12042:2014
|
Food processing machinery. Automatic dough dividers. Safety and hygiene requirements |
|
UNE-EN 1672-1:2015
|
Food processing machinery - Basic concepts - Part 1: Safety requirements |
|
I.S. EN 1034-27:2012
|
SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 27: ROLL HANDLING SYSTEMS |
|
I.S. EN ISO 28881:2013
|
MACHINE TOOLS - SAFETY - ELECTRO-DISCHARGE MACHINES (ISO 28881:2013) |
|
BS EN ISO 3691-2:2016
|
Industrial trucks. Safety requirements and verification Self-propelled variable-reach trucks |
|
PREN 15467 : DRAFT 2012
|
FOOD PROCESSING MACHINERY - FISH HEADING AND FILLETING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
|
I.S. EN ISO 13856-3:2013
|
SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES (ISO 13856-3:2013) |
|
PREN 13378 : DRAFT 2016
|
PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS |
|
ISO 7825:2017
|
Shipbuilding — Deck machinery — General requirements |
|
I.S. EN 16191:2014
|
TUNNELLING MACHINERY - SAFETY REQUIREMENTS |
|
I.S. EN 62282-3-100:2012
|
FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-3-100:2012 (EQV)) |
|
ISO 22673:2008
|
Ships and marine technology — Launching appliances for free-fall lifeboats |
|
I.S. EN 15954-2:2013
|
RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
|
16/30342849 DC : 0
|
BS EN 12733 - AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED MOTOR MOWERS - SAFETY |
|
I.S. EN ISO/IEC 80079-38:2016
|
EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC/DIS 80079-38:2012) |
|
CEN ISO/TR 22100-1:2017
|
Safety of machinery - Relationship with ISO 12100 - Part 1: How ISO 12100 relates to type-B and type-C standards (ISO/TR 22100-1:2015) |
|
S.R. CWA 16688:2013
|
BATTERY SWAP SYSTEMS INTERFACES FOR ELECTRIC VEHICLES |
|
I.S. EN ISO 13482:2014
|
ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR PERSONAL CARE ROBOTS (ISO 13482:2014) |
|
I.S. EN ISO 8230-1:2008
|
SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS |
|
ISO 19085-5:2017
|
Woodworking machines Safety Part 5: Dimension saws |
|
I.S. EN ISO 16089:2015
|
MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES (ISO/DIS 16089:2014) |
|
I.S. CEN/TR 14489:2005
|
FIRE-RESISTANT HYDRAULIC FLUIDS - CLASSIFICATION AND SPECIFICATION - GUIDELINES ON SELECTION FOR THE PROTECTION OF SAFETY, HEALTH AND THE ENVIRONMENT |
|
UNE-EN ISO 80079-37:2018
|
Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres - Non-electrical type of protection constructional safety 'c', control of ignition sources 'b', liquid immersion 'k' (ISO 80079-37:2016) |
|
BS EN 12977-5:2012
|
Thermal solar systems and components. Custom built systems Performance test methods for control equipment |
|
17/30362673 DC : 0
|
BS EN 12978 - INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY DEVICES FOR POWER OPERATED DOORS AND GATES - REQUIREMENTS AND TEST METHODS |
|
BS EN 12013:2018
|
Plastics and rubber machines. Internal mixers. Safety requirements |
|
BIS IS/ISO 20474-1 : 2008
|
EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
|
I.S. EN 15165:2014
|
FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
|
PD CEN ISO/TR 22100-1:2017
|
Safety of machinery. Relationship with ISO 12100 How ISO 12100 relates to type-B and type-C standards |
|
EN 15163:2017
|
Machines and installations for the exploitation and processing of natural stone - Safety - Requirements for diamond wire saws |
|
UNE-EN ISO 12100:2012
|
Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010) |
|
UNE-EN 12999:2011
|
Cranes - Loader cranes |
|
S6-14
|
Canadian Highway Bridge Design Code |
|
IWA 14-2:2013
|
Vehicle security barriers — Part 2: Application |
|
EN 12977-5:2018
|
Thermal solar systems and components - Custom built systems - Part 5: Performance test methods for control equipment |
|
ISO/TR 22100-1:2015
|
Safety of machinery Relationship with ISO 12100 Part 1: How ISO 12100 relates to type-B and type-C standards |
|
DIN EN 13135:2013-05
|
CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT |
|
ISO 14118:2017
|
Safety of machinery — Prevention of unexpected start-up |
|
NF EN 13525 : 2005 + A2 2009
|
FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY |
|
UNE-EN 1915-1:2013
|
Aircraft ground support equipment - General requirements - Part 1: Basic safety requirements |
|
DIN EN 940:2012-05
|
SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES |
|
DIN EN 861:2012-09
|
SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES |
|
DIN EN ISO 13850:2016-05
|
SAFETY OF MACHINERY - EMERGENCY STOP FUNCTION - PRINCIPLES FOR DESIGN (ISO 13850:2015) |
|
DIN EN 859:2012-09
|
SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANING MACHINES |
|
DIN EN 1114-1:2012-01
|
Plastics and rubber machines - Extruders and extrusion lines - Part 1: Safety requirements for extruders |
|
DIN EN 13852-1:2014-01
|
Cranes - Offshore cranes - Part 1: General-purpose offshore cranes |
|
DIN EN 14044:2014-04
|
HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH SEQUENTIAL MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS |
|
DIN EN 860:2012-09
|
SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANING MACHINES |
|
DIN EN 14043:2014-04
|
HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH COMBINED MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS |
|
BS EN 13463-5:2011
|
Non-electrical equipment intended for use in potentially explosive atmospheres Protection by constructional safety \'c\' |
|
BS EN ISO 13850:2015
|
Safety of machinery. Emergency stop function. Principles for design |
|
ISO 8230-1:2008
|
Safety requirements for dry-cleaning machines Part 1: Common safety requirements |
|
BS EN 1870-12:2013
|
Safety of woodworking machines. Circular sawing machines Pendulum cross-cut sawing machines |
|
BS EN 1846-3:2013
|
Firefighting and rescue service vehicles Permanently installed equipment. Safety and performance |
|
BS EN 13525 : 2005
|
FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY |
|
BS ISO 17842-1:2015
|
Safety of amusement rides and amusement devices Design and manufacture |
|
BS EN 13871:2014
|
Food processing machinery. Cubes cutting machinery. Safety and hygiene requirements |
|
BS EN 815 : 1997
|
SAFETY OF UNSHIELDED TUNNEL BORING MACHINES AND RODLESS SHAFT BORING MACHINES FOR ROCK - SAFETY REQUIREMENTS |
|
ISO 8230:1997
|
Safety requirements for dry-cleaning machines using perchloroethylene |
|
UNE-EN 16228-1:2015
|
Drilling and foundation equipment - Safety - Part 1: Common requirements |
|
UNE-EN ISO 13850:2016
|
Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015) |
|
ISO 4254-1:2013
|
Agricultural machinery — Safety — Part 1: General requirements |
|
UNE-EN 13524:2003
|
Highway maintenance machines - Safety requirements |
|
BS EN 13289 : 2001
|
PASTA PROCESSING PLANTS - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS |
|
EN 13525:2005+A2:2009
|
Forestry machinery - Wood chippers - Safety |
|
BS EN 982 : 1996
|
SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - HYDRAULICS |
|
BS EN 13204 : 2004
|
DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS |
|
ISO 13482:2014
|
Robots and robotic devices Safety requirements for personal care robots |
|
UNE-EN 12001:2013
|
Conveying, spraying and placing machines for concrete and mortar - Safety requirements |
|
UNE-EN 1870-15:2013
|
Safety of woodworking machines - Circular sawing machines - Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading |
|
UNE-EN 16005:2013
|
Power operated pedestrian doorsets - Safety in use - Requirements and test methods |
|
BS ISO 19372:2015
|
Microturbines applications. Safety |
|
UNE-EN 415-6:2014
|
Safety of packaging machines - Part 6: Pallet wrapping machines |
|
ISO 10218-2:2011
|
Robots and robotic devices Safety requirements for industrial robots Part 2: Robot systems and integration |
|
ISO 13856-3:2013
|
Safety of machinery — Pressure-sensitive protective devices — Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices |
|
ISO 23125:2015
|
Machine tools Safety Turning machines |
|
UNE-EN ISO 11680-2:2012
|
Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 2: Machines for use with back-pack power source (ISO 11680-2:2011) |
|
UNE-EN 12750:2013
|
Safety of woodworking machines - Four sided moulding machines |
|
ISO 13850:2015
|
Safety of machinery Emergency stop function Principles for design |
|
BS EN 12750:2013
|
Safety of woodworking machines. Four sided moulding machines |
|
BS EN 1870-11:2013
|
Safety of woodworking machines. Circular sawing machines Semi automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws) |
|
ISO 3691-2:2016
|
Industrial trucks — Safety requirements and verification — Part 2: Self-propelled variable-reach trucks |
|
ISO 11680-2:2011
|
Machinery for forestry Safety requirements and testing for pole-mounted powered pruners Part 2: Machines for use with back-pack power source |
|
ISO 13856-1:2013
|
Safety of machinery — Pressure-sensitive protective devices — Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors |
|
BS EN 1501-1 : 2011
|
REFUSE COLLECTION VEHICLES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 1: REAR LOADED REFUSE COLLECTION VEHICLES |
|
UNE-ISO 16110-1:2015
|
Hydrogen generators using fuel processing technologies -- Part 1: Safety |
|
BS EN 1870-4:2012
|
Safety of woodworking machines. Circular sawing machines Multiblade rip sawing machines with manual loading and/or unloading |
|
ISO 13849-1:2015
|
Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
|
ISO 11111-1:2016
|
Textile machinery Safety requirements Part 1: Common requirements |
|
ISO 11806-2:2011
|
Agricultural and forestry machinery Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers Part 2: Machines for use with back-pack power unit |
|
ISO 18217:2015
|
Safety of woodworking machines Edge-banding machines fed by chain(s) |
|
ISO 80079-37:2016
|
Explosive atmospheres Part 37: Non-electrical equipment for explosive atmospheres Non-electrical type of protection constructional safety 'c', control of ignition sources 'b', liquid immersion 'k' |
|
ISO 16093:2017
|
Machine tools — Safety — Sawing machines for cold metal |
|
UNE-EN 860:2007
|
Safety of woodworking machines - One side thickness planing machines |
|
IEC 62282-3-100:2012
|
Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety |
|
ISO 13856-2:2013
|
Safety of machinery — Pressure-sensitive protective devices — Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars |
|
UNE-EN ISO 11850:2012
|
Machinery for forestry - General safety requirements (ISO 11850:2011) |
|
BS EN 1808:2015
|
Safety requirements for suspended access equipment. Design calculations, stability criteria, construction. Examinations and tests |
|
BS EN 1908:2015
|
Safety requirements of cableway installations designed to carry persons. Tensioning devices |
|
UNE-EN 1870-9:2013
|
Safety of woodworking machines - Circular sawing machines - Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading |
|
I.S. EN 13525:2005
|
FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY |
|
BS EN 14359:2017
|
Gas-loaded accumulators for fluid power applications |
|
BS EN 13870:2015
|
Food processing machinery. Portion cutting machines. Safety and hygiene requirements |
|
UNE-EN 13525:2005
|
Forestry machinery - Wood chippers - Safety |
|
BS EN 536:2015
|
Road construction machines. Mixing plants for road construction materials. Safety requirements |
|
UNE-EN 940:2010
|
Safety of woodworking machines - Combined woodworking machines |
|
UNE-EN 13871:2015
|
Food processing machinery - Cubes cutting machinery - Safety and hygiene requirements |
|
BS EN ISO 13849-1:2015
|
Safety of machinery. Safety-related parts of control systems General principles for design |
|
UNE-EN 859:2008
|
Safety of woodworking machines - Hand fed surface planing machines |
|
BS EN 1870-5 : 2002
|
SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAW BENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES |
|
UNE-EN ISO 13849-1:2016
|
Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
|
UNE-EN 13870:2016
|
Food processing machinery - Portion cutting machines - Safety and hygiene requirements |
|
BS EN 860 : 2007
|
SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANING MACHINES |
|
UNE-EN ISO 11111-1:2016
|
Textile machinery - Safety requirements - Part 1: Common requirements (ISO 11111-1:2016) |
|
ISO 6115:1988
|
Shipbuilding — Trawl winches |
|
UNE-EN 1114-1:2012
|
Plastics and rubber machines - Extruders and extrusion lines - Part 1: Safety requirements for extruders |
|
UNE-EN 13852-1:2014
|
Cranes - Offshore cranes - Part 1: General-purpose offshore cranes |
|
UNE-EN 1870-8:2013
|
Safety of woodworking machines - Circular sawing machines - Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading |
|
CEN/TR 14489:2005
|
Fire-resistant hydraulic fluids - Classification and specification - Guidelines on selection for the protection of safety, health and the environment |
|
EN 1417:2014
|
Plastics and rubber machines - Two-roll mills - Safety requirements |
|
EN 691-1:2012
|
Safety of woodworking machines - Part 1: Common requirements |
|
EN 16774:2016
|
Safety of machinery - Safety requirements for steel converter and associated equipment |
|
EN 1570-1:2011+A1:2014
|
Safety requirements for lifting tables - Part 1: Lifting tables serving up to two fixed landings |
|
EN ISO 12100:2010
|
Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010) |
|
EN 14359:2017
|
Gas-loaded accumulators for fluid power applications |
|
EN 15467:2014
|
Food processing machinery - Fish heading and filleting machines - Safety and hygiene requirements |
|
EN ISO 3691-2:2016/AC:2016
|
INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SELF-PROPELLED VARIABLE-REACH TRUCKS (ISO 3691-2:2016) |
|
EN 1808:2015
|
Safety requirements for suspended access equipment - Design calculations, stability criteria, construction - Examinations and tests |
|
EN 536:2015
|
Road construction machines - Mixing plants for road construction materials - Safety requirements |
|
EN ISO 13856-1:2013
|
Safety of machinery - Pressure-sensitive protective devices - Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors (ISO 13856-1:2013) |
|
EN 415-10:2014
|
Safety of packaging machines - Part 10: General Requirements |
|
EN ISO 13850:2015
|
Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015) |
|
EN 15955-2:2013
|
Railway applications - Track - Demountable machines and associated equipment - Part 2: General safety requirements |
|
ONORM EN 12750 : 2013
|
SAFETY OF WOODWORKING MACHINES - FOUR-SIDED MOULDING MACHINES |
|
EN 15954-2:2013
|
Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements |
|
EN ISO 11850:2011/A1:2016
|
MACHINERY FOR FORESTRY - GENERAL SAFETY REQUIREMENTS (ISO 11850:2011+A1:2016) |
|
EN ISO 11111-1:2016
|
Textile machinery - Safety requirements - Part 1: Common requirements (ISO 11111-1:2016) |
|
EN 1908:2015
|
Safety requirements of cableway installations designed to carry persons - Tensioning devices |
|
EN 1915-1:2013
|
Aircraft ground support equipment - General requirements - Part 1: Basic safety requirements |
|
EN 14043:2014
|
High rise aerial appliances for fire and rescue service use - Turntable ladders with combined movements - Safety and performance requirements and test methods |
|
EN ISO 13856-2:2013
|
Safety of machinery - Pressure-sensitive protective devices - Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars (ISO 13856-2:2013) |
|
EN 16246:2012
|
Agricultural machinery - Backhoes - Safety |
|
EN 1672-1:2014
|
Food processing machinery - Basic concepts - Part 1: Safety requirements |
|
EN 609-1:2017
|
Agricultural and forestry machinery - Safety of log splitters - Part 1: Wedge splitters |
|
EN 16005:2012/AC:2015
|
POWER OPERATED PEDESTRIAN DOORSETS - SAFETY IN USE - REQUIREMENTS AND TEST METHODS |
|
EN ISO 10472-1:2008
|
Safety requirements for industrial laundry machinery - Part 1: Common requirements (ISO 10472-1:1997) |
|
UNI EN 13524 : 2014
|
HIGHWAY MAINTENANCE MACHINES - SAFETY REQUIREMENTS |
|
EN 15949:2012
|
Safety of machinery - Safety requirements for bar mills, structural steel mills and wire rod mills |
|
ONORM EN 1807-1 : 2013
|
SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS |
|
EN ISO 13849-1:2015
|
Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
|
EN ISO 13482:2014
|
Robots and robotic devices - Safety requirements for personal care robots (ISO 13482:2014) |
|
EN 1870-6:2017
|
Safety of woodworking machines - Circular sawing machines - Part 6: Circular sawing machines for fire wood |
|
EN 16500:2014
|
Machines for compacting waste materials or recyclable fractions - Vertical baling presses - Safety requirements |
|
EN 1870-19:2013
|
Safety of woodworking machines - Circular sawing machines - Part 19: Circular saw benches (with and without sliding table) and building site saws |
|
EN 1889-1:2011
|
Machines for underground mines - Mobile machines working underground - Safety - Part 1: Rubber tyred vehicles |
|
EN ISO 13849-2:2012
|
Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2012) |
|
EN 1552 : 2003
|
UNDERGROUND MINING MACHINES - MOBILE EXTRACTING MACHINES AT THE FACE - SAFETY REQUIREMENTS FOR SHEARER LOADERS AND PLOUGH SYSTEMS |
|
EN ISO 12100-2:2003/A1:2009
|
SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES |
|
EN 1870-18:2013
|
Safety of woodworking machines - Circular sawing machines - Part 18: Dimension saws |
|
EN 13852-1:2013
|
Cranes - Offshore cranes - Part 1: General-purpose offshore cranes |
|
EN 1807-2:2013
|
Safety of woodworking machines - Band sawing machines - Part 2: Log sawing machines |
|
EN ISO 8230 : 1997
|
SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES USING PERCHLOROETHYLENE |
|
EN 15165:2014
|
Food processing machinery - Forming machines - Safety and hygiene requirements |
|
EN 1870-5 : 2002
|
SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAWBENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES |
|
EN 1870-7:2012
|
Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading |
|
EN 13871:2014
|
Food processing machinery - Cubes cutting machinery - Safety and hygiene requirements |
|
EN 940:2009+A1:2012
|
Safety of woodworking machines - Combined woodworking machines |
|
ONORM EN 13870 : 2015
|
FOOD PROCESSING MACHINERY - PORTION CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
|
EN 14044:2014
|
High rise aerial appliances for fire and rescue service use - Turntable ladders with sequential movements - Safety and performance requirements and test methods |
|
EN ISO 11806-2:2011
|
Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 2: Machines for use with back-pack power unit (ISO 11806-2:2011) |
|
EN 14033-3:2017
|
Railway applications - Track - Railbound construction and maintenance machines - Part 3: General safety requirements |
|
EN 815:1996+A2:2008
|
Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock - Safety requirements |
|
EN 859:2007+A2:2012
|
Safety of woodworking machines - Hand fed surface planing machines |
|
EN ISO 16089:2015
|
Machine tools - Safety - Stationary grinding machines (ISO 16089:2015) |
|
ONORM EN 13524 : 2014
|
HIGHWAY MAINTENANCE MACHINES - SAFETY REQUIREMENTS |
|
EN 848-2 : 2007 COR 2012
|
SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES |
|
EN 861:2007+A2:2012
|
Safety of woodworking machines - Surface planing and thicknessing machines |
|
EN 848-3:2012
|
Safety of woodworking machines - One side moulding machines with rotating tool - Part 3: Numerically controlled (NC) boring and routing machines |
|
EN 16743:2016
|
Food processing machinery - Automatic industrial slicing machines - Safety and hygiene requirements |
|
EN 1870-8:2012
|
Safety of woodworking machines - Circular sawing machines - Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading |
|
EN 15861:2012
|
Food processing machinery - Smokehouses - Safety and hygiene requirements |
|
EN 15572:2015
|
Machines and plants for mining and tooling of natural stone - Safety - Requirements for edge finishing machines |
|
EN 415-6:2013
|
Safety of packaging machines - Part 6: Pallet wrapping machines |
|
EN 16474:2015
|
Plastics and rubber machines - Tyre curing machines - Safety requirements |
|
EN 1870-4:2012
|
Safety of woodworking machines - Circular sawing machines - Part 4: Multiblade rip sawing machines with manual loading and/or unloading |
|
EN ISO 10218-2:2011
|
Robots and robotic devices - Safety requirements for industrial robots - Part 2: Robot systems and integration (ISO 10218-2:2011) |
|
EN 15180:2014
|
Food processing machinery - Food depositors - Safety and hygiene requirements |
|
EN 289:2014
|
Plastics and rubber machines - Compression moulding machines and transfer moulding machines - Safety requirements |
|
EN 1870-10:2013
|
Safety of woodworking machines - Circular sawing machines - Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines |
|
EN 1870-12:2013
|
Safety of woodworking machines - Circular sawing machines - Part 12: Pendulum cross-cut sawing machines |
|
EN ISO 13856-3:2013
|
Safety of machinery - Pressure-sensitive protective devices - Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices (ISO 13856-3:2013) |
|
EN 1870-9:2012
|
Safety of woodworking machines - Circular sawing machines - Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading |
|
EN 15906:2011
|
Winter maintenance equipment - Snow removal machines with rotating tools - Specification and clearing capacity |
|
BS EN 15571:2014
|
Machines and plants for mining and tooling of natural stone. Safety. Requirements for surface finishing machines |
|
UNI EN ISO 13482 : 2014
|
ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR PERSONAL CARE ROBOTS |
|
BS EN 691-1:2012
|
Safety of woodworking machines Common requirements |
|
14/30270483 DC : 0
|
BS ISO 18289 - SHIPS AND MARINE TECHNOLOGY - NAVIGATION AND SHALLOW-WATER ENGINEERING VESSELS - ANCHOR WINCHES |
|
DIN EN 691-1:2013-01
|
SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS |
|
DIN EN 1570-1 E : 2015
|
SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 1: LIFTING TABLES SERVING UP TO TWO FIXED LANDINGS |
|
DIN EN 1034-8:2012-06
|
SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 8: REFINING PLANTS |
|
11/30232437 DC : 0
|
BS EN 1870-6:2002+A1:2009/FPRA2 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIREWOOD AND DUAL PURPOSE CIRCULAR SAWING MACHINES FOR FIREWOOD/CIRCULAR SAW BENCHES, WITH MANUAL LOADING AND/OR UNLOADING |
|
DIN EN 1672-1:2014-12
|
FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS |
|
14/30272245 DC : 0
|
BS EN ISO 16090-1 - MACHINE TOOLS SAFETY - MACHINING CENTRES, MILLING MACHINES, TRANSFER MACHINES - PART 1: SAFETY REQUIREMENTS |
|
BS ISO 13122:2011
|
Ships and marine technology. Launching appliances for davit-launched liferafts |
|
BS ISO 18296:2014
|
Ships and marine technology. Ship-shifting winches |
|
03/301050 DC : DRAFT JAN 2003
|
ISO 4254-1 ED.3 - AGRICULTURAL MACHINERY - TECHNICAL MEANS FOR ENSURING SAFETY - PART 1: GENERAL |
|
11/30239897 DC : 0
|
BS EN 16246 - AGRICULTURAL MACHINERY - BACKHOES - SAFETY |
|
16/30328756 DC : 0
|
BS EN 13814-2 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 2: OPERATION, MAINTENANCE AND USE |
|
I.S. EN ISO 8230:1998
|
SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES USING PERCHLOROETHYLENE |
|
13/30276220 DC : 0
|
BS EN 15571 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES |
|
BS EN ISO 18217:2015
|
Safety of woodworking machines. Edge-banding machines fed by chain(s) |
|
16/30341470 DC : 0
|
BS EN ISO 19085-10 - WOODWORKING MACHINES - SAFETY - PART 10: BUILDING SITE SAWS (CONTRACTOR SAWS) |
|
PREN 15571 : DRAFT 2013
|
MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES |
|
BS EN 15861:2012
|
Food processing machinery. Smokehouses. Safety and hygienerequirements |
|
BS EN ISO 12100:2010
|
Safety of machinery. General principles for design. Risk assessment and risk reduction |
|
12/30260496 DC : 0
|
BS EN 12750 - SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES |
|
PREN 13289 : DRAFT 2015
|
PASTA PROCESSING PLANT - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS |
|
BS EN ISO 11806-2:2011
|
Agricultural and forestry machinery. Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers Machines for use with back-pack power unit |
|
BS EN ISO 28881:2013
|
Machine tools. Safety. Electro-discharge machines |
|
14/30276846 DC : 0
|
BS EN ISO 18217 - SAFETY OF WOODWORKING MACHINES - EDGE-BANDING MACHINES FED CHAIN(S) |
|
14/30284271 DC : 0
|
BS ISO 6020-2 - HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR SINGLE ROD CYLINDERS, 16 MPA (160 BAR) SERIES - PART 2: COMPACT SERIES |
|
I.S. EN 12042:2014
|
FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS |
|
ISO 8133:2014
|
Hydraulic fluid power Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) compact series |
|
BS EN 1034-26:2012
|
Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines Roll packaging machines |
|
11/30239643 DC : 0
|
BS EN ISO 13856-2 - SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE-SENSITIVE EDGES AND PRESSURE-SENSITIVE BARS |
|
12/30247814 DC : 0
|
BS EN 1034-27 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 27: ROLL HANDLING SYSTEMS |
|
DIN EN 15165 E : 2015
|
FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
|
09/30196814 DC : 0
|
BS ISO 11680-2 - MACHINERY FOR FORESTRY - SAFETY REQUIREMENTS AND TESTING FOR POLE-MOUNTED POWERED PRUNERS - PART 2: MACHINES FOR USE WITH BACK-PACK POWER SOURCE |
|
12/30273148 DC : 0
|
BS EN 15467 - FOOD PROCESSING MACHINERY - FISH HEADING AND FILLETING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
|
10/30238615 DC : DRAFT NOV 2010
|
BS EN 62282-3-100 - FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
|
BS ISO 15442:2012+A1:2015
|
Cranes. Safety requirements for loader cranes |
|
BS EN 16228-1:2014
|
Drilling and foundation equipment. Safety Common requirements |
|
BS ISO 12140:2013
|
Agricultural machinery. Agricultural trailers and trailed equipment. Drawbar jacks |
|
12/30243459 DC : 0
|
BS ISO/IEC 80079-37 - EXPLOSIVE ATMOSPHERES - PART 37: NON-ELECTRICAL EQUIPMENT FOR USE IN EXPLOSIVE ATMOSPHERES - NON-ELECTRICAL TYPE OF PROTECTION CONSTRUCTIONAL SAFETY 'CH', CONTROL OF IGNITION SOURCES 'BH', LIQUID IMMERSION 'KH' |
|
DIN EN 16743 E : 2016
|
FOOD PROCESSING MACHINERY - AUTOMATIC INDUSTRIAL SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
|
BS ISO 4414:1998
|
Pneumatic fluid power. General rules relating to systems |
|
UNE-EN 1870-18:2013
|
Safety of woodworking machines - Circular sawing machines - Part 18: Dimension saws |
|
EN ISO 19085-3:2017
|
Woodworking machines - Safety requirements - Part 3: Numerically controlled (NC) boring and routing machines (ISO 19085-3:2017) |
|
I.S. EN ISO 16090-1:2018
|
MACHINE TOOLS SAFETY - MACHINING CENTRES, MILLING MACHINES, TRANSFER MACHINES - PART 1: SAFETY REQUIREMENTS (ISO 16090-1:2017) |
|
UNE-EN 15571:2015
|
Machines and plants for mining and tooling of natural stone - Safety - Requirements for surface finishing machines |
|
DIN EN 15954-2:2013-11
|
Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements |
|
14/30299146 DC : 0
|
BS EN 16743 - FOOD PROCESSING MACHINERY - AUTOMATIC INDUSTRIAL SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
|
16/30321441 DC : DRAFT SEP 2016
|
BS ISO 7825 - SHIPBUILDING - DECK MACHINERY - GENERAL REQUIREMENTS |
|
DIN EN ISO 11806-2:2012-04
|
Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 2: Machines for use with back-pack power unit (ISO 11806-2:2011) |
|
11/30234399 DC : 0
|
BS ISO 3730 - SHIPBUILDING AND MARINE STRUCTURES - MOORING WINCHES |
|
BS ISO 3730:2012
|
Shipbuilding and marine structures. Mooring winches |
|
I.S. EN 16474:2015
|
PLASTICS AND RUBBER MACHINES - TYRE CURING MACHINES - SAFETY REQUIREMENTS |
|
DIN ISO 20966:2008-04
|
AUTOMATIC MILKING INSTALLATIONS - REQUIREMENTS AND TESTING |
|
ISO/TS 18409:2018
|
Hydraulic fluid power Hose and hose assemblies Method of collecting a fluid sample for analyzing the cleanliness of a hose or hose assembly |
|
ANSI/ISO 12100 : 2012
|
SAFETY OF MACHINERY - GENERAL PRINCIPLES FOR DESIGN - RISK ASSESSMENT AND RISK REDUCTION |
|
DIN EN 15180 E : 2015
|
FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS |
|
BS EN ISO 13856-1:2013
|
Safety of machinery. Pressure-sensitive protective devices General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors |
|
BS ISO 8626 : 1989
|
SERVO-HYDRAULIC TEST EQUIPMENT FOR GENERATING VIBRATION - METHOD OF DESCRIBING CHARACTERISTICS |
|
PD ISO/TR 17529:2014
|
Machine tools. Practical guidance and example of risk assessment on electro-discharge machines |
|
11/30245401 DC : 0
|
BS EN 1034-8 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 8: REFINING PLANTS |
|
ANSI B11.11 : 2001 : R2012
|
SAFETY REQUIREMENTS FOR GEAR AND SPLINE CUTTING MACHINES |
|
16/30291994 DC : 0
|
BS EN ISO 19225 - UNDERGROUND MINING MACHINES - MOBILE EXTRACTING MACHINES AT THE FACE - SAFETY REQUIREMENTS FOR SHEARER LOADERS AND PLOUGH SYSTEMS |
|
BS ISO 22673:2008
|
Ships and marine technology. Launching appliances for free-fall lifeboats |
|
UNE-EN ISO 18217:2016
|
Safety of woodworking machines - Edge-banding machines fed by chain(s) (ISO 18217:2015) |
|
CSA Z142 : 2010 : FR
|
CODE FOR POWER PRESS OPERATION: HEALTH, SAFETY, AND SAFEGUARDING REQUIREMENTS |
|
UNE-EN ISO 13856-3:2013
|
Safety of machinery - Pressure-sensitive protective devices - Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices (ISO 13856-3:2013) |
|
04/30115437 DC : 0
|
ISO 5598 - FLUID POWER SYSTEMS AND COMPONENTS - VOCABULARY |
|
ANSI B11.11 : 2001 : R2007
|
SAFETY REQUIREMENTS FOR GEAR AND SPLINE CUTTING MACHINES |
|
DIN EN ISO 13856-3:2013-12
|
SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES (ISO 13856-3:2013) |
|
CSA Z142 :2010
|
CODE FOR POWER PRESS OPERATION: HEALTH, SAFETY, AND SAFEGUARDING REQUIREMENTS |
|
BS ISO 21628 : 2008
|
GARDENING MACHINERY - POWERED MATERIAL-COLLECTING SYSTEMS - SAFETY |
|
ISO 20474-1:2017
|
Earth-moving machinery — Safety — Part 1: General requirements |
|
UNE-EN 16252:2013
|
Machines for compacting waste materials or recyclable fractions - Horizontal baling presses - Safety requirements |
|
ONORM EN 1501-5 : 2012
|
REFUSE COLLECTION VEHICLES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 5: LIFTING DEVICES FOR REFUSE COLLECTION VEHICLES |
|
I.S. EN 16228-1:2014
|
DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 1: COMMON REQUIREMENTS |
|
I.S. EN 1034-26:2012
|
SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 26: ROLL PACKAGING MACHINES |
|
I.S. EN 1034-8:2012
|
SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 8: REFINING PLANTS |
|
ISO 13578:2017
|
Industrial furnaces and associated processing equipment — Safety requirements for machinery and equipment for production of steel by electric arc furnaces |
|
I.S. EN ISO 13856-1:2013
|
SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE MATS AND PRESSURE-SENSITIVE FLOORS (ISO 13856-1:2013) |
|
I.S. EN ISO 19085-1:2017
|
WOODWORKING MACHINES - SAFETY - PART 1: COMMON REQUIREMENTS (ISO 19085-1:2017) |
|
I.S. EN 1870-19:2013
|
SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS |
|
UNE-EN ISO 11806-2:2012
|
Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 2: Machines for use with back-pack power unit (ISO 11806-2:2011) |
|
ISO 19085-3:2017
|
Woodworking machines Safety requirements Part 3: Numerically controlled (NC) boring and routing machines |
|
ISO 19224:2017
|
Continuous surface miners (CSM) — Safety requirements |
|
BS EN ISO 19085-1:2017
|
Woodworking machines. Safety Common requirements |
|
DIN EN ISO 16089:2016-06
|
MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES (ISO 16089:2015) |
|
EN ISO 18217:2015
|
Safety of woodworking machines - Edge-banding machines fed by chain(s) (ISO 18217:2015) |
|
16/30337481 DC : 0
|
BS EN 13525 - FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY |
|
15/30279801 DC : 0
|
BS EN 15746-2 - RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
|
UNI EN 1672-1 : 2014
|
FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS |
|
UNE-EN 1459-1:2018
|
Rough-terrain trucks - Safety requirements and verification - Part 1: Variable-reach trucks |
|
ANSI/ISO 12100-2 : 2007
|
SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES |
|
PREN 16517 : DRAFT 2017
|
AGRICULTURAL AND FORESTRY MACHINERY - MOBILE YARDERS FOR TIMBER LOGGING - SAFETY |
|
UNI EN 1034-21 : 2012
|
SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 21: COATING MACHINES |
|
I.S. EN ISO 23125:2015
|
MACHINE TOOLS - SAFETY - TURNING MACHINES (ISO 23125:2015) |
|
ISO 8132:2014
|
Hydraulic fluid power Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series |
|
I.S. EN ISO 11680-2:2011
|
MACHINERY FOR FORESTRY - SAFETY REQUIREMENTS AND TESTING FOR POLEMOUNTED POWERED PRUNERS - PART 2: MACHINES FOR USE WITH BACKPACK POWER SOURCE (ISO 11680-2:2011) |
|
IEC 62840-2:2016
|
Electric vehicle battery swap system - Part 2: Safety requirements |
|
I.S. EN ISO 12100:2010
|
SAFETY OF MACHINERY - GENERAL PRINCIPLES FOR DESIGN - RISK ASSESSMENT AND RISK REDUCTION |
|
DIN EN 1870-4:2012-06
|
SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTIBLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING |
|
ISO 9089:1989
|
Marine structures Mobile offshore units Anchor winches |
|
DIN EN 415-6:2013-09
|
Safety of packaging machines - Part 6: Pallet wrapping machines |
|
DIN EN 1501-1:2016-03
|
Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collection vehicles (includes Amendment A1:2015) |
|
DIN EN 1870-5:2013-01
|
Safety of woodworking machines - Circular sawing machines - Part 5: Circular saw benches/up-cutting cross-cut sawing machines (includes Amendment A2:2012) |
|
DIN EN 13289:2015-12 (Draft)
|
Pasta processing plant - Dryers and coolers - Safety and hygiene requirements; German and English version prEN 13289:2015 |
|
DIN EN ISO 13849-1:2016-06
|
Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
|
DIN EN 1889-1 E : 2011
|
MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES |
|
DIN EN ISO 11680-2:2012-04
|
Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 2: Machines for use with back-pack power source (ISO 11680-2:2011) |
|
DIN EN 13524:2014-07
|
Highway maintenance machines - Safety requirements (includes Amendment A2:2014) |
|
DIN EN 289:2014-09
|
PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS |
|
DIN EN 13871:2015-01
|
FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS |
|
BS EN 13020:2015
|
Road surface treatment machines. Safety requirements |
|
PD ISO/TR 18569:2004
|
Safety of machinery. Guidelines for the understanding and use of safety of machinery standards. |
|
BS EN 1870-8:2012
|
Safety of woodworking machines. Circular sawing machines Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading |
|
UNE-EN ISO 4254-1:2016
|
Agricultural machinery - Safety - Part 1: General requirements (ISO 4254-1:2013) |
|
BS EN 609-1:2017
|
Agricultural and forestry machinery. Safety of log splitters Wedge splitters |
|
UNE-EN 1808:2016
|
Safety requirements for suspended access equipment - Design calculations, stability criteria, construction - Examinations and tests |
|
BS EN 1114-1:2011
|
Plastics and rubber machines. Extruders and extrusion lines Safety requirements for extruders |
|
BS EN 14043:2014
|
High rise aerial appliances for fire and rescue service use. Turntable ladders with combined movements. Safety and performance requirements and test methods |
|
BS EN 848-3:2012
|
Safety of woodworking machines. One side moulding machines with rotating tool Numerically controlled (NC) boring and routing machines |
|
UNE-EN 1846-3:2015
|
Firefighting and rescue service vehicles - Part 3: Permanently installed equipment - Safety and performance |
|
BS EN 415-6:2013
|
Safety of packaging machines Pallet wrapping machines |
|
ISO 28881:2013
|
Machine tools Safety Electro-discharge machines |
|
I.S. EN 860:2007
|
SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANING MACHINES |
|
BS EN 13852-1:2013
|
Cranes. Offshore cranes General-purpose offshore cranes |
|
ISO 11850:2011
|
Machinery for forestry — General safety requirements |
|
BS EN 1915-1:2013
|
Aircraft ground support equipment. General requirements Basic safety requirements |
|
BS EN 12001:2012
|
Conveying, spraying and placing machines for concrete and mortar. Safety requirements |
|
ISO 13849-2:2012
|
Safety of machinery — Safety-related parts of control systems — Part 2: Validation |
|
BS EN 12463:2014
|
Food processing machinery. Filling machines and auxiliary machines. Safety and hygiene requirements |
|
BS EN 1552:2003
|
Underground mining machines. Mobile extracting machines at the face. Safety requirements for shearer loaders and plough systems |
|
EN 16228-6:2014
|
Drilling and foundation equipment - Safety - Part 6: Jetting, grouting and injection equipment |
|
EN 1012-3:2013
|
Compressors and vacuum pumps - Safety requirements - Part 3: Process compressors |
|
EN 1034-3:2011
|
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 3: Rereelers and winders |
|
EN ISO 28881:2013/AC:2013
|
Machine tools - Safety - Electro-discharge machines - Technical Corrigendum 1 (ISO 28881:2013/Cor 1:2013) |
|
DIN EN 815:1996-11
|
SAFETY OF UNSHIELDED TUNNEL BORING MACHINES AND RODLESS SHAFT BORING MACHINES FOR ROCK - SAFETY REQUIREMENTS |
|
DIN EN 1570-2:2017-03
|
SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 2: LIFTING TABLES SERVING MORE THAN 2 FIXED LANDINGS OF A BUILDING, FOR LIFTING GOODS WITH A VERTICAL TRAVEL SPEED NOT EXCEEDING 0,15 M/S |
|
UNI EN ISO 11680-2 : 2012
|
MACHINERY FOR FORESTRY - SAFETY REQUIREMENTS AND TESTING FOR POLE-MOUNTED POWERED PRUNERS - PART 2: MACHINES FOR USE WITH BACK-PACK POWER SOURCE |
|
DIN EN 12977-5:2012-06
|
THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 5: PERFORMANCE TEST METHODS FOR CONTROL EQUIPMENT |
|
EN 1034-16:2012
|
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 16: Paper and board making machines |
|
EN 12001:2012
|
Conveying, spraying and placing machines for concrete and mortar - Safety requirements |
|
EN ISO 11680-2:2011
|
Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 2: Machines for use with back-pack power source (ISO 11680-2:2011) |
|
DIN EN 1846-3:2013-11
|
FIREFIGHTING AND RESCUE SERVICE VEHICLES - PART 3: PERMANENTLY INSTALLED EQUIPMENT - SAFETY AND PERFORMANCE |
|
EN 12750:2013
|
Safety of woodworking machines - Four sided moulding machines |
|
DIN EN 815:2009-12
|
SAFETY OF UNSHIELDED TUNNEL BORING MACHINES AND RODLESS SHAFT BORING MACHINES FOR ROCK - SAFETY REQUIREMENTS |
|
EN 13463-5:2011
|
Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: Protection by constructional safety 'c' |
|
DIN EN 14359:2017-09
|
GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS |
|
EN 12111:2014
|
Tunnelling machines - Road headers and continuous miners - Safety requirements |
|
UNE-EN 860:2007+A2:2012
|
Safety of woodworking machines - One side thickness planing machines |
|
UNE-EN 848-2:2007+A1:2010
|
Safety of woodworking machines - One side moulding machines with rotating tool - Part 2: Single spindle hand fed/integrated fed routing machines |
|
UNE-EN 848-2:2007
|
Safety of woodworking machines - One side moulding machines with rotating tool - Part 2: Single spindle hand fed/integrated fed routing machines |
|
ONORM EN 1417 : 2015
|
PLASTICS AND RUBBER MACHINES - TWO ROLL MILLS - SAFETY REQUIREMENTS |
|
UNE-EN 1870-5:2003
|
Safety of woodworking machines - Circular sawing machines - Part 5: Circular sawbenches/up-cutting cross-cut sawing machines. |
|
UNE-EN 859:2008+A2:2012
|
Safety of woodworking machines - Hand fed surface planing machines |
|
CEI EN IEC 62061:2023
|
Safety of machinery - Functional safety of safety-related control systems |
|
UNE-EN 1570-1:2012
|
Safety requirements for lifting tables - Part 1: Lifting tables serving up to two fixed landings |
|
UNE-EN 1501-1:2012
|
Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collection vehicles |